The revitalisation of flexor tendon allografts with bone marrow stromal cells and mechanical stimulation: An ex vivo model revitalising flexor tendon allografts

Engineered Tendon-Fibrocartilage-Bone Composite With Mechanical Stimulation for Augmentation of Rotator Cuff Repair: A Study Using an In Vivo Canine Model With a 6-Month Follow-up

BACKGROUND

Rotator cuff repair augmentation using biological materials has become popular in clinical practice to reduce the high retear rates associated with traditional repair techniques. Tissue engineering approaches, such as engineered tendon-fibrocartilage-bone composite (TFBC), have shown promise in enhancing the biological healing of rotator cuff tears in animals. However, previous studies have provided limited long-term data on TFBC repair outcomes. The effect of mechanical stimulation on TFBC has not been explored extensively.

PURPOSE

To evaluate functional outcomes after rotator cuff repair with engineered TFBC subjected to mechanical stimulation in a 6-month follow-up using a canine in vivo model.

STUDY DESIGN

Controlled laboratory study.

METHODS

A total of 40 canines with an acute infraspinatus (ISP) tendon transection model were randomly allocated to 4 groups (n =10): (1) unilateral ISP tendon undergoing suture repair only (control surgery); (2) augmentation with engineered TFBC alone (TFBC); (3) augmentation with engineered TFBC and bone marrow-derived stem cells (BMSCs) (TFBC+C); and (4) augmentation with engineered TFBC and BMSCs, as well as mechanical stimulation (TFBC+C+M). Outcome measures-including biomechanical evaluations such as failure strength, stiffness, failure mode, gross appearance, ISP tendon and muscle morphological assessment, and histological analysis-were performed 6 months after surgery.

RESULTS

As shown in the mechanical test, the TFBC+C+M group exhibited higher failure strength compared with other repair techniques. The most common failure mode was avulsion fracture in the TFBC+C+M group, but tendon-bone junction rupture was observed predominantly in different groups. Engineered TFBC with mechanical stimulation showed over 70% relative failure strength compared with normal ISP, and the other groups showed about 50% relative failure strength. Histological analysis revealed less fat infiltration and closer-to-normal muscle fiber structure in the mechanical stimulation group.

CONCLUSION

This study provides evidence that mechanical stimulation of engineered TFBC promotes rotator cuff regeneration, thus supporting its potential for rotator cuff repair augmentation.

CLINICAL RELEVANCE

This study provides valuable evidence supporting the use of a novel tissue-engineered material (TFBC) in rotator cuff repair and paves the way for advancements in the field of rotator cuff regeneration.

Cell-based tissue engineered flexor tendon allograft: A canine in vivo study

This study aimed to compare the clinically established autologous extrasynovial tendon graft to a newly developed tissue-engineered allograft (Eng-allograft) in terms of functional outcomes following flexor tendon reconstruction in a canine model. The second and fifth flexor digitorum profundus (FDP) tendons from 16 dogs were transected and repaired in Zone II. After 6 weeks of cage activity, the repaired tendons were intentionally ruptured, creating a clinically relevant model for reconstruction. The re-ruptured FDP tendons were then reconstructed using either the clinically standard autologous extrasynovial tendon graft or the Eng-allograft, which had been revitalized with autologous bone marrow-derived mesenchymal stem cells (BMSCs) and synovialized using carbodiimide derivatized synovial fluid (cd-SYN). Following 12 weeks of postoperative rehabilitation, the functional outcomes of the surgical digits were evaluated. The Eng-allograft group exhibited improved digital function, including lower digit work of flexion and reduced adhesion status, while maintaining similar tendon gliding resistance compared to the autograft group. However, the failure load of both the distal and proximal host/graft conjunctions in the Eng-allograft group was significantly lower than that of the autograft group with higher graft rupture at the host-graft junction. In conclusion, the decellularized allogenic intrasynovial tendon, when revitalized BMSCs and synovialized with cd-SYN, demonstrates positive effects on digital function improvement and adhesion reduction. However, the healing at both proximal and distal graft/host junctions is far lower than the autograft. Further research is needed to enhance the healing capacity of allograft conjunctions, aiming to achieve a comparable level of healing seen with autografts.

Dynamic Tensile Stress Promotes Regeneration of Achilles Tendon in a Panda Rope Bridge Technique Mice Model

Regeneration of ruptured Achilles tendon remains a clinical challenge owing to its limited regenerative capacity. Dynamic tensile stress plays a positive role in the regeneration of tendon, although the specific underlying mechanisms remain unclear. In this study, the Achilles tendon defect-regeneration model was created in male C57BL/6 mice aged 8 weeks. The animals were randomly assigned to four groups-repair, non-repair, repair with fixation, and non-repair with fixation. The repair group and repair with fixation group adopted the panda rope bridge technique (PRBT) repair method. Our results demonstrated the presence of more densely aligned and mature collagen fibers, as well as more tendon-related makers, in the repair group at both 2- and 4-week post-surgery. Furthermore, the biomechanical strength of the regenerated tendon in the repair group was highly improved. Most importantly, the expressions of integrin αv and its downstream and the phosphorylation levels of FAK and ERK were remarkably higher in the repair group than in the other groups. Furthermore, blocking FAK or ERK with selective inhibitors PF573228 and U0126 resulted in obvious adverse effects on the histological structure of the regenerated Achilles tendon. In summary, this study demonstrated that dynamic tensile stress based on the PRBT could effectively promote the regeneration of the Achilles tendon, suggesting that dynamic tensile stress enhances the cell proliferation and tenogenic differentiation via the activation of the integrin/FAK/ERK signaling pathway.

Biomimetic Scaffolds for Tendon Tissue Regeneration

Tendon tissue connects muscle to bone and plays crucial roles in stress transfer. Tendon injury remains a significant clinical challenge due to its complicated biological structure and poor self-healing capacity. The treatments for tendon injury have advanced significantly with the development of technology, including the use of sophisticated biomaterials, bioactive growth factors, and numerous stem cells. Among these, biomaterials that the mimic extracellular matrix (ECM) of tendon tissue would provide a resembling microenvironment to improve efficacy in tendon repair and regeneration. In this review, we will begin with a description of the constituents and structural features of tendon tissue, followed by a focus on the available biomimetic scaffolds of natural or synthetic origin for tendon tissue engineering. Finally, we will discuss novel strategies and present challenges in tendon regeneration and repair.

The Effect of Gelatin Molecular Weight on Tendon Lubrication Utilizing an Extrasynovialized Turkey Flexor Tendon Model

INTRODUCTION

Flexor tendon injuries are common hand injuries among the military population often resulting in functional impairment. Flexor tendon gliding friction has been linked to adhesion formation, especially with the use of extrasynovial grafts. Carbodiimide-derivatized hyaluronic acid with gelatin (cd-HA-gelatin) can reduce gliding friction of the tendon graft; however, the effects of gelatin molecular weight (MW) have not been studied. The turkey model has been shown to better match humans, but extrasynovial tendons are unavailable. The purpose of this study was to (1) manually roughen turkey flexor digitorum profundus (FDP) tendons to simulate extrasynovial tendons and (2) investigate the effects of gelatin MW on tendon friction.

MATERIALS AND METHODS

The third digit of (n = 48) turkeys were dissected with the proximal pulley, and FDP tendon and the flexor superficialis tendon were preserved. Digits were randomly assigned into four groups: one saline control and three cd-HA-gelatin-treated groups of varying gelatin MW. Flexor digitorum profundus tendon friction was measured at its original condition, serving as a baseline. Tendons were roughened using a custom rig, and tendon friction was measured again. All four groups received treatment and gliding friction was measured every 100 cycles to a total of 1,000 cycles.

RESULTS

Tendon friction significantly increased (P < 0.05) after roughening. Friction in the saline control group increased steadily over repeated cycles, whereas friction of all gelatin-treated tendons decreased significantly compared with the saline control group (P < 0.05), maintaining low friction to 1,000 cycles representing human tendons. There was no significant difference found between gelatin-treated groups.

CONCLUSIONS

We have developed a method to roughen synovial FDP tendons to create extrasynovial-like tendons for lubrication material evaluations. Cd-HA-gelatin effectively reduces tendon friction in this model. Our data suggest medium or low MW gelatin may provide a better reduction in friction compared with high MW gelatin.

The Application of Mechanical Stimulations in Tendon Tissue Engineering

Tendon injury is the most common disease in the musculoskeletal system. The current treatment methods have many limitations, such as poor therapeutic effects, functional loss of donor site, and immune rejection. Tendon tissue engineering provides a new treatment strategy for tendon repair and regeneration. In this review, we made a retrospective analysis of applying mechanical stimulation in tendon tissue engineering, and its potential as a direction of development for future clinical treatment strategies. For this purpose, the following topics are discussed; (1) the context of tendon tissue engineering and mechanical stimulation; (2) the applications of various mechanical stimulations in tendon tissue engineering, as well as their inherent mechanisms; (3) the application of magnetic force and the synergy of mechanical and biochemical stimulation. With this, we aim at clarifying some of the main questions that currently exist in the field of tendon tissue engineering and consequently gain new knowledge that may help in the development of future clinical application of tissue engineering in tendon injury.

Lateral slit delivery of bone marrow stromal cells enhances regeneration in the decellularized allograft flexor tendon

BACKGROUND/OBJECTIVE

Stem cell-based therapy has been applied to accelerate the revitalization of allograft tendon into a viable and functional tendon. Although many authors have proposed different methods to help the seeded stem cell distribution in the decellularized allograft, limited success has been achieved as tendon is a high dense connective tissue. We hypothesized that bone marrow stromal cells (BMSCs), seeded through the lateral slit, can regenerate the decellularized tendon (DCT) graft. The cell proliferation, cell viability, and tendon-specific gene expression are increased with the seeded cell density.

METHODS

Eighty-seven flexor digitorum profundus tendons were equally and randomly divided into 6 treatment groups that were seeded with low-density (2 × 107 cells/mL) and high-density (5 × 107 cells/mL) BMSCs through lateral slits cultured for 2 and 4 weeks, DCT without cells, and fresh live tendons. Tendons were evaluated for cell distribution, cell proliferation, cell viability, gene expression of Collagen I and Collagen III, tenogenic markers, and MMPs.

RESULTS

Histologic evaluation revealed BMSCs distributed from the lateral slit to the whole DCT. BMSCs were proliferated and kept viable in lateral slit decellularized tendon (LSDCT) in both seeded cell density groups after 2 and 4 weeks of culture. However, no significant differences in the cell proliferation between both cell density groups at 2 and 4 weeks of culture were observed. The lowest cell viability was found in the high-density group after 4 weeks of culture. BMSCs in LSDCT showed a significant tendency of higher gene expression of Collagen I, Collagen III, tenascin C, MMP2, MMP9, and MMP13 compared to normal tendons in both cell density groups at 2 and 4 weeks of culture.

CONCLUSION

BMSCs proliferated and remained viable after 2 and 4 weeks of culture with distribution throughout the lateral slits. Lateral slit preparation allows for the effective delivery and maintenance of mesenchymal cells with proliferation and generating a tenogenic behaviour of DCT in both the low and high cell densities in an in vitro model.

THE TRANSLATION POTENTIAL OF THIS ARTICLE

Revitalizing the implanted decellularized allograft is important for clinical application. In this study, we demonstrated that the DCT, with lateral slits, could harbour the seeded stem cell and stimulate proliferation with collagen synthesis. This evidence was presented for clinical application of the lateral slit technique, in DCT grafts, which would repopulate the seeded BMSCs during tendon and ligament reconstruction.

Multifactorial bottom-up bioengineering approaches for the development of living tissue substitutes

Bottom-up bioengineering utilizes the inherent capacity of cells to build highly sophisticated structures with high levels of biomimicry. Despite the significant advancements in the field, monodomain approaches require prolonged culture time to develop an implantable device, usually associated with cell phenotypic drift in culture. Herein, we assessed the simultaneous effect of macromolecular crowding (MMC) and mechanical loading in enhancing extracellular matrix (ECM) deposition while maintaining tenocyte (TC) phenotype and differentiating bone marrow stem cells (BMSCs) or transdifferentiating neonatal and adult dermal fibroblasts toward tenogenic lineage. At d 7, all cell types presented cytoskeleton alignment perpendicular to the applied load independently of the use of MMC. MMC enhanced ECM deposition in all cell types. Gene expression analysis indicated that MMC and mechanical loading maintained TC phenotype, whereas tenogenic differentiation of BMSCs or transdifferentiation of dermal fibroblasts was not achieved. Our data suggest that multifactorial bottom-up bioengineering approaches significantly accelerate the development of biomimetic tissue equivalents.-Gaspar, D., Ryan, C. N. M., Zeugolis, D. I. Multifactorial bottom-up bioengineering approaches for the development of living tissue substitutes.

Revitalized and synovialized allograft for intrasynovial flexor tendon reconstruction in an in vivo canine model

This study was to test our hypothesis that flexor tendon reconstruction with an allograft revitalized with bone marrow stromal cells (BMSCs) and synovialized with carbodiimide derivatized autologous synovial fluid (cd-SYN) would result in better digit functional restoration than the conventional allograft tendon. A total of 32 flexor digital profundus tendons from the second and fifth digit of 16 dogs were created a repair failure model first. Then, failed-repaired tendons were reconstructed with either a revitalized-synovialized allograft tendon or a clinical standard autograft tendon (control group). The allograft tendon was seeded with autologous BMSCs in multiple slits and the graft surface was coated with cd-SYN. A 6 weeks after tendon reconstruction, the digits were harvested and evaluated for digit function, adhesion status, tendon gliding resistance, attachment strength, cell viability, and histologic factors. The allograft group had significantly improved digit function compared with the control group through decreased work of flexion, increased digit range of motion under 2-Newton force, and less adhesion score (p < .05). However, the distal attachment-site strength and stiffness in the allograft tendon were significantly weaker than the autografts (p < .05). No significant difference was found for gliding resistance. Histologically, allograft tendons coated with allograft had smoother surfaces and showed tendon-to-bone and tendon-to-tendon incorporation. Viable BMSCs were found in the tendon slits 6 weeks after the graft. In conclusion, cellular lubricant-based modification of allograft tendons improved digit function and reduced the adhesions compared with autograft for flexor tendon reconstruction. However, improvement of graft-to-host tendon healing is still challenging. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res.