Isolation and characterization of MC3T3-E1 preosteoblast subclones with distinct in vitro and in vivo differentiation/mineralization potential

Establishing a simple protocol to induce the osteogenic differentiation of MC3T3-E1 cells in 2D and its transfer to 3D spheroid cultures

The murine cell line MC3T3-E1 is used in many in vitro studies in bone-related research, but different protocols to induce its osteogenic differentiation have been reported. The aim of this study was to identify the best mixture of osteogenic supplements to induce osteogenic differentiation of MC3T3-E1 subclone 4 cells in a two-dimensional cell culture setup. As spheroids as three-dimensional cell aggregates are of increasing importance, we also present a simple method to generate osteogenic differ.entiated spheroids on this basis. Three different mixtures of osteogenic supplements were used to induce osteogenic differentiation for up to 28 days. Osteogenic differentiation was monitored by alizarin red and von Kossa staining, energy dispersive X-ray (EDX) analysis, and real-time quantitative PCR analysis of osteogenic marker genes. Spheroids were generated from osteogenic differentiated cells by liquid overlay technique. The use of 5 mM β-glycerophosphate, 10 nM dexamethasone, and 50 µg/mL ascorbic acid was able to induce osteogenic differentiation of MC3T3-E1 cells within 14 days, as shown by strong positive signals in both staining methods. Scanning electron microscopy revealed extracellular secretions on the membranes of differentiated cells with a significantly increased calcium content of 16.4 ± 2.4% and a phosphorus content of 10.1 ± 1.1%, as shown by energy dispersive X-ray analysis. Differentiated MC3T3-E1 cells could be detached by incubation in AccuMax for 10 min and spheroids were generated from this cell suspension on day 14. Significant upregulation of the osteogenic markers Sp7, osteocalcin, and bone sialoprotein was detected by real-time quantitative PCR analysis of these spheroids. In addition to other reports in the literature describing osteogenic differentiation of spheroids, we were able to show that it is also possible to generate spheroids from osteogenically differentiated two-dimensional cell cultures, which are easier to handle. Thus, there are indeed several ways to generate osteogenic differentiated MC3T3-E1 spheroids.

Perfluorooctanoic acid and perfluorooctane sulfonate inhibit in vitro osteogenesis: possible role of connexin 43-mediated gap-junctional intercellular communication

In the current study, we investigated the effects of two legacy per- and polyfluoroalkyl substances (PFASs) namely perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) on osteogenesis. The alterations of connexin 43 (Cx43)-mediated gap junctions (GJs) were further explored as a potential mechanism. The two cell models (C3H10T1/2 and MC3T3-E1 cells) differentiated into osteoblasts (OBs) were utilized, and treated with PFOA and PFOS at the doses of 0.25, 2.5, 25, and 75 μM. Real-time PCR and Western blot were applied to assess the mRNA and protein expression of osteogenic-specific markers and Cx43. ALP staining and ARS staining were used to evaluate the osteogenesis process. The scrape-loading dye transfer assay was performed to assess the GJ-mediated intercellular coupling. To investigate the role of gap-junctional intercellular communication (GJIC) in the PFAS-induced osteogenic inhibition, the Cx43-specific GJIC enhancer, rotigaptide (ZP123), was added into the differentiation medium of C3H10T1/2 cells. After the exposure of PFOA and PFOS, the osteogenic molecules were down-regulated and the calcium deposition was reduced in the two cell models, indicating the inhibitory effects of the legacy PFASs. The Cx43 expression and GJIC activity were significantly suppressed, and the usage of ZP123 rescued the adverse impact on osteogenesis, suggesting the remarkable role of GJIC herein.

Expression analysis of genes including Zfhx4 in mice and zebrafish reveals a temporospatial conserved molecular basis underlying craniofacial development

BACKGROUND

Embryonic craniofacial development involves several cellular and molecular events that are evolutionarily conserved among vertebrates. Vertebrate models such as mice and zebrafish have been used to investigate the molecular and cellular etiologies underlying human craniofacial disorders, including orofacial clefts. However, the molecular mechanisms underlying embryonic development in these two species are unknown. Therefore, elucidating the shared mechanisms of craniofacial development between disease models is crucial to understanding the underlying mechanisms of phenotypes in individual species.

RESULTS

We selected mice and zebrafish as model organisms to compare various events during embryonic craniofacial development. We identified genes (Sox9, Zfhx3 and 4, Cjun, and Six1) exhibiting similar temporal expression patterns between these species through comprehensive and stage-matched gene expression analyses. Expression analysis revealed similar gene expression in hypothetically corresponding tissues, such as the mice palate and zebrafish ethmoid plate. Furthermore, loss-of-function analysis of Zfhx4/zfhx4, a causative gene of human craniofacial anomalies including orofacial cleft, in both species resulted in deformed skeletal elements such as the palatine and ethmoid plate in mice and zebrafish, respectively.

CONCLUSIONS

These results demonstrate that these disease models share common molecular mechanisms, highlighting their usefulness in modeling craniofacial defects in humans.

Genetic Profiling of MC3T3-E1 Cells in Different Media: Implications for In Vitro Screening Development

Background/Objectives: The translation of in vitro biomaterial evaluations into successful clinical applications often fails due to discrepancies with in vivo results. Previously, we demonstrated that differences in culture medium conditions influence the bone formation process. This study aimed to investigate the influence of culture media on gene expression during calcification induction in osteoblasts. Methods: Using MC3T3-E1 cells cultured in α Minimum Essential Medium without L-ascorbic acid (αMEM(-)) and Dulbecco's Modified Eagle Medium (DMEM), we screened gene expression profiles through microarray analysis and validated key findings with quantitative PCR. Additionally, we compared these gene expression patterns with those in primary osteoblasts (POBs) cultured under the same medium conditions. Results: The results revealed distinct gene expression profiles in MC3T3-E1 cells depending on the culture medium, while POBs exhibited minimal differences between media, except for the gene Alpl. In αMEM(-), Alpl expression in POBs was significantly increased approximately 4-fold via calcification stimulation (p < 0.0001). POBs cultured in DMEM showed calcification appearance differing from the αMEM(-) condition, even though no significant increase in Alpl expression via calcification stimulation was observed. Conclusions: Differences in media appear to remarkably impact osteoblast gene expression and mineralization. These findings may help improve biomaterial evaluation when transitioning from in vitro assessments to in vivo evaluations. Moreover, our results suggest the possibility that gene expression differences observed in MC3T3-E1 cells reflect the diverse bone formation processes in vivo. Focusing on these genes could facilitate the development of screening methods for bone formation, supporting future clinical applications in orthopedics.

Feedback regulation of retinaldehyde reductase DHRS3, a critical determinant of retinoic acid homeostasis

Retinoic acid is crucial for vertebrate embryogenesis, influencing anterior-posterior patterning and organogenesis through its interaction with nuclear hormone receptors comprising heterodimers of retinoic acid receptors (RARα, β, or γ) and retinoid X receptors (RXRα, β, or γ). Tissue retinoic acid levels are tightly regulated since both its excess and deficiency are deleterious. Dehydrogenase/reductase 3 (DHRS3) plays a critical role in this regulation by converting retinaldehyde to retinol, preventing excessive retinoic acid formation. Mutations in DHRS3 can result in embryonic lethality and congenital defects. This study shows that mouse Dhrs3 expression is responsive to vitamin A status and is directly regulated by the RAR/RXR complex through cis-regulatory elements. This highlights a negative feedback mechanism that ensures retinoic acid homeostasis.

Rejuvenating aged osteoprogenitors for bone repair

Aging is marked by a decline in tissue regeneration, posing significant challenges to an increasingly older population. Here, we investigate age-related impairments in calvarial bone healing and introduce a novel two-part rejuvenation strategy to restore youthful repair. We demonstrate that aging negatively impacts the calvarial bone structure and its osteogenic tissues, diminishing osteoprogenitor number and function and severely impairing bone formation. Notably, increasing osteogenic cell numbers locally fails to rescue repair in aged mice, identifying the presence of intrinsic cellular deficits. Our strategy combines Wnt-mediated osteoprogenitor expansion with intermittent fasting, which leads to a striking restoration of youthful levels of bone healing. We find that intermittent fasting improves osteoprogenitor function, benefits that can be recapitulated by modulating NAD+-dependent pathways or the gut microbiota, underscoring the multifaceted nature of this intervention. Mechanistically, we identify mitochondrial dysfunction as a key component in age-related decline in osteoprogenitor function and show that both cyclical nutrient deprivation and Nicotinamide mononucleotide rejuvenate mitochondrial health, enhancing osteogenesis. These findings offer a promising therapeutic avenue for restoring youthful bone repair in aged individuals, with potential implications for rejuvenating other tissues.

The role of bone sialoprotein in bone healing

Bone sialoprotein (BSP) is a multi-functional extracellular matrix (ECM) protein associated with mineralized tissues, particularly bone and cementum. The amino acid sequence of BSP includes three evolutionarily conserved sequences which contribute to functions of the protein: an N-terminal collagen-binding domain, polyglutamic acid (polyE) sequences involved in hydroxyapatite nucleation and crystal growth, and a C-terminal arginine-glycine-aspartic acid (RGD) integrin-binding domain. BSP promotes attachment and differentiation of osteogenic and osteoclastic cells. Genetic ablation of BSP in mice results in skeletal and dental developmental defects and impaired bone healing in both appendicular bone and alveolar bone of the jaw. Several studies demonstrated positive effects of BSP on bone healing in rodent models, though other experiments show negligible results. Native (harvested from rat bones) BSP cross-linked to collagen induced slight improvements in calvarial bone healing in rats. Recombinant BSP and collagen delivered in a polylactide (PLA) cylinder improved bone defect healing in rat femurs. Both native and recombinant BSP delivered in a collagen gel improved alveolar bone healing in wild-type and BSP-deficient mice. These advances suggest BSP is a new player in bone healing that has potential to be an alternative or complimentary to other bioactive factors. Future studies are necessary to understand mechanisms of how BSP influences bone healing and optimize delivery and dose in different types of bone defects and injuries.

In vitro evaluation of bone cell response to novel 3D-printable nanocomposite biomaterials for bone reconstruction

Critically-sized segmental bone defects represent significant challenges requiring grafts for reconstruction. 3D-printed synthetic bone grafts are viable alternatives to structural allografts if engineered to provide appropriate mechanical performance and osteoblast/osteoclast cell responses. Novel 3D-printable nanocomposites containing acrylated epoxidized soybean oil (AESO) or methacrylated AESO (mAESO), polyethylene glycol diacrylate, and nanohydroxyapatite (nHA) were produced using masked stereolithography. The effects of volume fraction of nHA and methacrylation of AESO on interactions of differentiated MC3T3-E1 osteoblast (dMC3T3-OB) and differentiated RAW264.7 osteoclast cells with 3D-printed nanocomposites were evaluated in vitro and compared with a control biomaterial, hydroxyapatite (HA). Higher nHA content and methacrylation significantly improved the mechanical properties. All nanocomposites supported dMC3T3-OB cells' adhesion and proliferation. Higher amounts of nHA enhanced cell adhesion and proliferation. mAESO in the nanocomposites resulted in greater adhesion, proliferation, and activity at day 7 compared with AESO nanocomposites. Excellent osteoclast-like cells survival, defined actin rings, and large multinucleated cells were only observed on the high nHA fraction (30%) mAESO nanocomposite and the HA control. Thus, mAESO-based nanocomposites containing higher amounts of nHA have better interactions with osteoblast-like and osteoclast-like cells, comparable with HA controls, making them a potential future alternative graft material for bone defect repair.

Identification of the murine osteoblastic cell MC3T3-E1 as a permissive cell line in response to lumpy skin disease virus

Lumpy skin disease virus (LSDV) is a rapidly emerging pathogen in China. Screening suitable cells for LSDV replication is vital for future research on pathogenic mechanisms and vaccine development. Previous comparative studies have identified that the rodent-derived BHK21 is a highly susceptible cell model to LSDV infection. Using western blot, indirect immune-fluorescence assay, flow cytometry, and transmission electron microscopy methods, this study is the first to identify the murine osteoblastic cell line MC3T3-E1 as a novel permissive cell model for LSDV infection. The establishment of MC3T3-E1 as a suitable infectious cell model enhances our understanding of the species range and cell types of the permissive cells and nonpermissive that support LSDV replication. It is helpful to accelerate future research on the pathogenesis, clinical application, and vaccine development of LSDV.

Methodology and Characterization of a 3D Bone Organoid Model Derived from Murine Cells

Here, we report on the development of a cost-effective, well-characterized three-dimensional (3D) model of bone homeostasis derived from commonly available stocks of immortalized murine cell lines and laboratory reagents. This 3D murine-cell-derived bone organoid model (3D-mcBOM) is adaptable to a range of contexts and can be used in conjunction with surrogates of osteoblast and osteoclast function to study cellular and molecular mechanisms that affect bone homeostasis in vitro or to augment in vivo models of physiology or disease. The 3D-mcBOM was established using a pre-osteoblast murine cell line, which was seeded into a hydrogel extracellular matrix (ECM) and differentiated into functional osteoblasts (OBs). The OBs mineralized the hydrogel ECM, leading to the deposition and consolidation of hydroxyapatite into bone-like organoids. Fourier-transform infrared (FTIR) spectroscopy confirmed that the mineralized matrix formed in the 3D-mcBOM was bone. The histological staining of 3D-mcBOM samples indicated a consistent rate of ECM mineralization. Type I collagen C-telopeptide (CTX1) analysis was used to evaluate the dynamics of OC differentiation and activity. Reliable 3D models of bone formation and homeostasis align with current ethical trends to reduce the use of animal models. This functional model of bone homeostasis provides a cost-effective model system using immortalized cell lines and easily procured supplemental compounds, which can be assessed by measuring surrogates of OB and OC function to study the effects of various stimuli in future experimental evaluations of bone homeostasis.

Defining the Most Potent Osteoinductive Culture Conditions for MC3T3-E1 Cells Reveals No Implication of Oxidative Stress or Energy Metabolism

The MC3T3-E1 preosteoblastic cell line is widely utilised as a reliable in vitro system to assess bone formation. However, the experimental growth conditions for these cells hugely diverge, and, particularly, the osteogenic medium (OSM)'s composition varies in research studies. Therefore, we aimed to define the ideal culture conditions for MC3T3-E1 subclone 4 cells with regard to their mineralization capacity and explore if oxidative stress or the cellular metabolism processes are implicated. Cells were treated with nine different combinations of long-lasting ascorbate (Asc) and β-glycerophosphate (βGP), and osteogenesis/calcification was evaluated at three different time-points by qPCR, Western blotting, and bone nodule staining. Key molecules of the oxidative and metabolic pathways were also assessed. It was found that sufficient mineral deposition was achieved only in the 150 μg.mL-1/2 mM Asc/βGP combination on day 21 in OSM, and this was supported by Runx2, Alpl, Bglap, and Col1a1 expression level increases. NOX2 and SOD2 as well as PGC1α and Tfam were also monitored as indicators of redox and metabolic processes, respectively, where no differences were observed. Elevation in OCN protein levels and ALP activity showed that mineralisation comes as a result of these differences. This work defines the most appropriate culture conditions for MC3T3-E1 cells and could be used by other research laboratories in this field.

Leveraging selective knockdown of Sost gene by polyethyleneimine-siRNA-chitosan reduced gold nanoparticles to promote osteogenesis in MC3T3-E1 & MEF cells

Aim: Osteoporosis is a systemic skeletal disorder characterized by reduced osteoblast differentiation, predominantly by overexpression of the Sost gene. A layer-by-layer approach enabled encapsulation of Sost siRNA to enhance the short half-life and poor transfection capacity of siRNA. Materials & methods: Polyethyleneimine and siRNA on chitosan-coated gold nanoparticles (PEI/siRNA/Cs-AuNPs) were engineered using chitosan-reduced gold nanoparticles. They were characterized by dynamic light scattering, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared and gel-mobility assays. Detailed in vitro experiments, gene silencing and western blots were performed. Results: A total of 80% knockdown of the target sclerostin protein was observed by PEI/siRNA/Cs-AuNPs, q-PCR showed threefold downregulation of the Sost gene. Osteogenic markers RunX2 and Alp were significantly upregulated. Conclusion: We report a safe, biocompatible nanotherapeutic strategy to enhance siRNA protection and subsequent silencing to augment bone formation.

Bone formation by Irisin-Poly vinyl alchol modified bioglass ceramic beads in the rabbit model

In the aging society, slow bone regeneration poses a serious hindrance to the quality of life. To deal with this problem, in this study, we have combined irisin with the bioglass regular beads to enhance the bone regeneration process. For this purpose, highly porous bioglass was obtained as spherical beads by using sodium alginate. The bioglass was evaluated by various analytical techniques such as SEM, EDS, XRD, and pore size distribution. The results depicted that porous bioglass was prepared correctly and SEM analysis showed a highly porous bioglass was formulated. On this bioglass, irisin was loaded with the assistance of polyvinyl alcohol (PVA) in three concentrations (50 ng/ml, 100 ng/ml, and 150 ng/ml per 1 g of bioglass). SEM analysis showed that pores are covered with PVA. The irisin release profile showed a sustained release over the time period of 7 days. In vitro, biocompatibility evaluation by the MC3T3E1 cells showed that prepared bioglass and irisin loaded bioglass (BGI50, BGI100, and BG150) are highly biocompatible. Alizarin Red staining analysis showed that after 2 weeks BGI50 samples showed highest calcium nodule formation. In vivo in the rabbit femur model was conducted for 1 and 2 months. BGI150 samples showed highest BV/TV ratio of 37.1 after 2 months. The histological data showed new bone formation surrounding the beads and with beads loaded with irisin. Immunohistochemistry using markers OPN, RUNX, COL, and ALP supported the osteogenic properties of the irisin-loaded bioglass beads. The results indicated that irisin-loaded bioglass displayed remarkable bone regeneration.

In Vitro and In Vivo Bone-Forming Effect of a Low-Molecular-Weight Collagen Peptide

This study reveals that low-molecular-weight collagen peptide (LMWCP) can stimulate the differentiation and the mineralization of MC3T3-E1 cells in vitro and attenuate the bone remodeling process in ovariectomized (OVX) Sprague-Dawley rats in vivo. Moreover, the assessed LMWCP increased the activity of alkaline phosphatase (ALP), synthesis of collagen, and mineralization in MC3T3-E1 cells. Additionally, mRNA levels of bone metabolism-related factors such as the collagen type I alpha 1 chain, osteocalcin (OCN), osterix, bone sialoprotein, and the Runt family-associated transcription factor 2 were increased in cells treated with 1,000 μg/ml of LMWCP. Furthermore, we demonstrated that critical bone morphometric parameters exhibited significant differences between the LMWCP (400 mg/kg)-receiving and vehicle-treated rat groups. Moreover, the expression of type I collagen and the activity of ALP were found to be higher in both the femur and lumbar vertebrae of OVX rats treated with LMWCP. Finally, the administration of LMWCP managed to alleviate osteogenic parameters such as the ALP activity and the levels of the bone alkaline phosphatase, the OCN, and the procollagen type 1 N-terminal propeptide in OVX rats. Thus, our findings suggest that LMWCP is a promising candidate for the development of food-based prevention strategies against osteoporosis.

Forsythia viridissima Leaf Extract Inhibits Trabecular Bone Mineral Loss in Rats Induced by a Low-Calcium Diet

The Forsythia has been used in herbal medicine, and the leaf is also expected to contain various putative bioactive substances. In this study, we investigated the effects of Forsythia viridissima leaf extract (FLE) on bone metabolism. The anti-osteoporotic effect of FLE was determined in male rats fed a low-calcium diet. Micro-CT analysis of the distal end of the left femur showed a trend toward less reduction in total bone mineral density (total BMD) in the group received FLE on a 0.05% low-calcium diet compared to the low-calcium control group. Also, trabecular bone mineral density (Tb.BMD) was significantly less decreased in the FLE group. Then, in vitro experiment, we found that matairesinol, a lignan particularly rich in Forsythia leaf, remarkably promotes osteoblastic mineralization. Thus, our study revealed that FLE inhibits the progression of osteoporosis caused by calcium deficiency.

The Role of Photobiomodulation on Dental-Derived Stem Cells in Regenerative Dentistry: A Comprehensive Systematic Review

BACKGROUND

Photobiomodulation therapy involves exposing tissues to light sources, including light-emitting diodes or low-level lasers, which results in cellular function modulation. The molecular mechanism of this treatment is revealed, demonstrating that depending on the light settings utilized, it has the potential to elicit both stimulatory and inhibitory reactions.

OBJECTIVE

The current systematic review aimed to evaluate the impact of photobiomodulation therapy on dental stem cells and provide an evidence-based conclusion in this regard.

METHODS

This systematic review was performed and reported based on the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) revised guidelines. PICO(S) components were employed to define the inclusion criteria. Web of Science, Scopus, Medline as well as grey literature, and google scholar were searched up to September 2021 to retrieve relevant papers.

RESULTS

Photobiomodulation therapy showed promising effects on the proliferation, viability, and differentiation of dental stem cells. This finding was based on reviewing related articles with a low risk of bias.

CONCLUSION

Despite the positive benefits of photobiomodulation therapy on dental stem cells, the current data do not provide a definitive conclusion on the best physical parameters for enhancing cell viability, proliferation, and differentiation.

G-protein coupled receptor 5C (GPRC5C) is required for osteoblast differentiation and responds to EZH2 inhibition and multiple osteogenic signals

Osteoblast differentiation is epigenetically suppressed by the H3K27 methyltransferase EZH2, and induced by the morphogen BMP2 and transcription factor RUNX2. These factors also regulate distinct G protein coupled receptors (GPRCs; e.g., PTH1R, GPR30/GPER1). Because GPRCs transduce many physiological stimuli, we examined whether BMP2 or EZH2 inhibition (i.e., GSK126) regulates other GPRC genes in osteoblasts. RNA-seq screening of >400 mouse GPRC-related genes showed that many GPRCs are downregulated during osteogenic differentiation. The orphan receptor GPRC5C, along with a small subset of other GPRCs, is induced by BMP2 or GSK126 during Vitamin C dependent osteoblast differentiation, but not by all-trans retinoic acid. ChIP-seq analysis revealed that GSK126 reduces H3K27me3 levels at the GPRC5C gene locus in differentiating MC3T3-E1 osteoblasts, consistent with enhanced GPRC5C mRNA expression. Loss of function analyses revealed that shRNA-mediated depletion of GPRC5C decreases expression of bone markers (e.g., BGLAP and IBSP) and mineral deposition in response to BMP2 or GSK126. GPRC5C mRNA was found to be reduced in the osteopenic bones of KLF10 null mice which have compromised BMP2 signaling. GPRC5C mRNA is induced by the bone-anabolic activity of 17β-estradiol in trabecular but not cortical bone following ovariectomy. Collectively, these findings suggest that GPRC5C protein is a key node in a pro-osteogenic axis that is normally suppressed by EZH2-mediated H3K27me3 marks and induced during osteoblast differentiation by GSK126, BMP2, and/or 17β-estradiol. Because GPRC5C protein is an understudied orphan receptor required for osteoblast differentiation, identification of ligands that induce GPRC5C signaling may support therapeutic strategies to mitigate bone-related disorders.

Sema4D is diminished in leukocyte platelet-rich fibrin and impairs pre-osteoblastic MC3T3-E1 cells' functionality

OBJECTIVE

Semaphorin 4D (Sema4D) is a coupling factor expressed on osteoclasts that may hinder osteoblast differentiation. Since the leukocyte platelet-rich fibrin (L-PRF) membrane promotes growth factor concentration, this study aims to quantify the amount of Sema4D in L-PRF membranes, and analyze the impact of Sema4D on osteoblast cell function in vitro.

DESIGN

Enzyme-linked immunosorbent assay (ELISA) was used to quantify the levels of Sema4D in both L-PRF and whole blood (serum). To analyze the impairment of Sema4D on osteoblasts, MC3T3-E1 cells were induced to osteogenic differentiation and exposed to Sema4D ranging from 10 to 500 ng/ml concentrations. The following parameters were assayed: 1) cell viability by MTT assay after 24, 48, and 72 h; 2) matrix mineralization by Alizarin Red staining after 14 days, 3) Runt-related transcription factor 2 (RUNX-2), osteocalcin (OCN), osteonectin (ONC), bone sialoprotein (BSP) and alkaline phosphatase (ALP) gene expression by qPCR. For all data, the significance level was set at 5%.

RESULTS

The amount of Sema4D in the whole blood (serum) was higher than in L-PRF. Osteoblasts exposed to Sema4D at all tested concentrations exhibited a decrease in matrix mineralization formation as well in RUNX-2, OCN, ONC, BSP, and ALP gene expression (p < 0.05).

CONCLUSION

The presence of Sema4D, a molecule known for suppressing osteoblast activity, diminishes within L-PRF, enhancing its ability to facilitate bone regeneration.

Signal transducer and activator of transcription 3 positively regulates osteoblastic differentiation in MC3T3-E1 cells

BACKGROUND

Signal transducer and activator of transcription 3 (STAT3) plays a pivotal role in osteoblastic differentiation. However, the exact role of STAT3 in osteogenic differentiation of the pre-osteoblastic cell line MC3T3-E1 is still controversial.

METHODS

In this study, we demonstrated that eradication of STAT3 signaling by the inhibitors cryptotanshinone (CPT, a STAT3-specific inhibitor) or STAT3 siRNA both suppressed osteogenic differentiation of MC3T3-E1 cells, with a decrease in alkaline phosphatase (ALP) activity, protein expressions of the osteogenic differentiation markers Collagen I (ColI), ALP, and osteocalcin (OCN), and reduced matrix mineralization capacity at the terminal stage of osteogenic differentiation. However, the inhibition of STAT3 by CPT did not affect MC3T3-E1 cell proliferation. To further clarify the effect of STAT3 on osteogenic differentiation of MC3T3-E1 cells, we forced STAT3 expression and found that this ameliorated osteogenic differentiation.

RESULTS

Thus, our results confirmed that STAT3 is a likely positive regulator of osteogenic differentiation in MC3T3-E1 cells.

CONCLUSIONS

These findings may provide a basis for the development of more efficient and controllable protocols for osteoblastic differentiation and facilitate their use in regenerative medicine. In addition, our results provide novel insights into the effect of the STAT3 antagonist CPT on modulation of osteogenesis.

Synthetic peptides activating discoidin domain receptor 2 and collagen-binding integrins cooperate to stimulate osteoblast differentiation of skeletal progenitor cells

Skeletal progenitor: collagen interactions are critical for bone development and regeneration. Both collagen-binding integrins and discoidin domain receptors (DDR1 and DDR2) function as collagen receptors in bone. Each receptor is activated by a distinct collagen sequence; GFOGER for integrins and GVMGFO for DDRs. Specific triple helical peptides containing each of these binding domains were evaluated for ability to stimulate DDR2 and integrin signaling and osteoblast differentiation. GVMGFO peptide stimulated DDR2 Y740 phosphorylation and osteoblast differentiation as measured by induction of osteoblast marker mRNAs and mineralization without affecting integrin activity. In contrast, GFOGER peptide stimulated focal adhesion kinase (FAK) Y397 phosphorylation, an early measure of integrin activation, and to a lesser extent osteoblast differentiation without affecting DDR2-P. Significantly, the combination of both peptides cooperatively enhanced both DDR2 and FAK signaling and osteoblast differentiation, a response that was blocked in Ddr2-deficient cells. These studies suggest that the development of scaffolds containing DDR and integrin-activating peptides may provide a new route for promoting bone regeneration. STATEMENT OF SIGNIFICANCE: A method for stimulating osteoblast differentiation of skeletal progenitor cells is described that uses culture surfaces coated with a collagen-derived triple-helical peptide to selectively activate discoidin domain receptors. When this peptide is combined with an integrin-activating peptide, synergistic stimulation of differentiation is seen. This approach of combining collagen-derived peptides to stimulate the two main collagen receptors in bone (DDR2 and collagen-binding integrins) provides a route for developing a new class of tissue engineering scaffolds for bone regeneration.

Osteogenic Activity on NaOH-Etched Three-Dimensional-Printed Poly-ɛ-Caprolactone Scaffolds in Perfusion or Spinner Flask Bioreactor

Bioreactor systems, for example, spinner flask and perfusion bioreactors, and cell-seeded three-dimensional (3D)-printed scaffolds are used in bone tissue engineering strategies to stimulate cells and produce bone tissue suitable for implantation into the patient. The construction of functional and clinically relevant bone graft using cell-seeded 3D-printed scaffolds within bioreactor systems is still a challenge. Bioreactor parameters, for example, fluid shear stress and nutrient transport, will crucially affect cell function on 3D-printed scaffolds. Therefore, fluid shear stress induced by spinner flask and perfusion bioreactors might differentially affect osteogenic responsiveness of pre-osteoblasts inside 3D-printed scaffolds. We designed and fabricated surface-modified 3D-printed poly-ɛ-caprolactone (PCL) scaffolds, as well as static, spinner flask, and perfusion bioreactors to determine fluid shear stress and osteogenic responsiveness of MC3T3-E1 pre-osteoblasts seeded on the scaffolds in the bioreactors using finite element (FE)-modeling and experiments. FE-modeling was used to quantify wall shear stress (WSS) distribution and magnitude inside 3D-printed PCL scaffolds within spinner flask and perfusion bioreactors. MC3T3-E1 pre-osteoblasts were seeded on NaOH surface-modified 3D-printed PCL scaffolds, and cultured in customized static, spinner flask, and perfusion bioreactors up to 7 days. The scaffolds' physicochemical properties and pre-osteoblast function were assessed experimentally. FE-modeling showed that spinner flask and perfusion bioreactors locally affected WSS distribution and magnitude inside the scaffolds. The WSS distribution was more homogeneous inside scaffolds in perfusion than in spinner flask bioreactors. The average WSS on scaffold-strand surfaces ranged from 0 to 6.5 mPa for spinner flask bioreactors, and from 0 to 4.1 mPa for perfusion bioreactors. Surface modification of scaffolds by NaOH resulted in a surface with a honeycomb-like pattern and increased surface roughness (1.6-fold), but decreased water contact angle (0.3-fold). Both spinner flask and perfusion bioreactors increased cell spreading, proliferation, and distribution throughout the scaffolds. Perfusion, but not spinner flask bioreactors more strongly enhanced collagen (2.2-fold) and calcium deposition (2.1-fold) throughout the scaffolds after 7 days compared with static bioreactors, likely due to uniform WSS-induced mechanical stimulation of the cells revealed by FE-modeling. In conclusion, our findings indicate the importance of using accurate FE models to estimate WSS and determine experimental conditions for designing cell-seeded 3D-printed scaffolds in bioreactor systems. Impact Statement The success of cell-seeded three-dimensional (3D)-printed scaffolds depends on cell stimulation by biomechanical/biochemical factors to produce bone tissue suitable for implantation into the patient. We designed and fabricated surface-modified 3D-printed poly-ɛ-caprolactone (PCL) scaffolds, as well as static, spinner flask, and perfusion bioreactors to determine wall shear stress (WSS) and osteogenic responsiveness of pre-osteoblasts seeded on the scaffolds using finite element (FE)-modeling and experiments. We found that cell-seeded 3D-printed PCL scaffolds within perfusion bioreactors more strongly enhanced osteogenic activity than within spinner flask bioreactors. Our results indicate the importance of using accurate FE-models to estimate WSS and determine experimental conditions for designing cell-seeded 3D-printed scaffolds in bioreactor systems.

An inducible explant model of osteoclast-osteoprogenitor coordination in exacerbated osteoclastogenesis

Elucidating a basic blueprint of osteoclast-osteoblast coordination in skeletal remodeling and understanding how this coordination breaks down with age and disease is essential for addressing the growing skeletal health problem in our aging population. The paucity of simple, activatable, biologically relevant models of osteoclast-osteoblast coordination has hindered our understanding of how skeletal remolding is regulated. Here, we describe an inducible ex vivo model of osteoclast-osteoblast progenitor coordination. Induction activates the release of osteoclastogenic factors from osteoprogenitors, which elicits the differentiation and fusion of neighboring preosteoclasts. In turn, multinucleated osteoclasts release soluble coupling factors, RANK⁺ extracellular vesicles and promote osteoprogenitor proliferation, recapitulating aspects of perturbed coordination in diseases underpinned by excessive osteoclast formation. We expect this model to expedite the investigation of cell-cell fusion, osteoclast-osteoblast progenitor coordination, and extracellular vesicle signaling during bone remodeling and offer a powerful tool for evaluating signaling cascades and novel therapeutic interventions in osteoclast-linked skeletal disease.

A dual-functional PEEK implant coating for anti-bacterial and accelerated osseointegration

Polyetheretherketone (PEEK) has been widely applied in biomedical engineering. However, the unsatisfactory bioactivity essentially limits the clinical application of PEEK. In this study, a simply immersing method was proposed to fabricate a dual-functional PEEK with antibacterial properties and enhanced bone integration. Firstly, the surface of PEEK was modified with a polydopamine (PDA) coating by incubating at dopamine solution. Afterward, the PEEK-PDA was modified with manganese (Mn) and silver (Ag) ions by the soaking method to fabricate the PEEK-PDA-Mn/Ag. The physicochemical capabilities of PEEK-PDA-Mn/Ag were further explored in the ions release, wettability, morphology, and element distributions. PEEK-PDA-Mn/Ag obviously accelerated the adhesion and distribution of MC3T3-E1 cells, indicating favorable biosafety in vitro. Meanwhile, the osteogenic properties of PEEK-PDA-Mn and PEEK-PDA-Mn/Ag were proved by the increased expression of osteogenic genes, alkaline phosphatase (ALP), and mineralization in vitro. Additionally, the wide antibacterial capabilities of PEEK-PDA-Mn/Ag were proved in both Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) in vitro. Furthermore, the PEEK-PDA-Mn/Ag was antibacterial with capability in enhancing osseointegration in vivo. Overall, the simply immersing method can modify the surface of PEEK, giving the bioactivity, biocompatibility, and antibacterial ability to the composited PEEK, which could be applied as an orthopedic implant in clinical.

The Influence of Electrode Design on Detecting the Effects of Ferric Ammonium Citrate (FAC) on Pre-Osteoblast through Electrical Cell-Substrate Impedance Sensing (ECIS)

Detection sensitivity is a crucial factor in the application of ECIS sensors. For these biosensors, the electrode configuration has a direct impact on sensitivity, yet few studies on monopolar electrodes have been reported. In this study, ECIS sensor arrays, which have a series of working electrode configuration with a wide diameter range and different electrode number, were fabricated to monitor living osteoblast-like MC3T3-E1 cells. The experimental results revealed that when the electrode diameter was larger than 25 μm, electrodes with smaller diameter and number yielded higher impedance values and generated more impedance shift to cell status change. The membrane capacitance obtained by equivalent circuit fitting was at the same level. When the electrode diameter was even smaller, the results in detection of cell monolayer were opposite, and there was no distinct relationship between impedance and membrane capacitance shift to cell status change and electrode geometry. The proposed sensor chip, allowing for a sustained and stable detection of cellular impedance, provides the basis for the selection of the electrode configuration of monopolar electrodes. The test results of electrodes with a diameter of 25 μm and lower indicated the possibility of single cell impedance measurement, which can provide unique insight into the heterogeneous electrical behavior of cells, and, in this case, the electrode size should be close to the cell size.

Bone Formation in 2D Culture of Primary Cells

Relevance of mineralized nodules in two-dimensional (2D) osteoblast/osteocyte cultures to bone biology, pathology, and engineering is a decades old question, but a comprehensive answer appears to be still wanting. Bone-like cells, extracellular matrix (ECM), and mineral were all reported but so were non-bone-like ones. Many studies described seemingly bone-like cell-ECM structures based on similarity to few select bone features in vivo, yet no studies examined multiple bone features simultaneously and none systematically studied all types of structures coexisting in the same culture. Here, we report such comprehensive analysis of 2D cultures based on light and electron microscopies, Raman microspectroscopy, gene expression, and in situ messenger RNA (mRNA) hybridization. We demonstrate that 2D cultures of primary cells from mouse calvaria do form bona fide bone. Cells, ECM, and mineral within it exhibit morphology, structure, ultrastructure, composition, spatial-temporal gene expression pattern, and growth consistent with intramembranous ossification. However, this bone is just one of at least five different types of cell-ECM structures coexisting in the same 2D culture, which vary widely in their resemblance to bone and ability to mineralize. We show that the other two mineralizing structures may represent abnormal (disrupted) bone and cartilage-like structure with chondrocyte-to-osteoblast transdifferentiation. The two nonmineralizing cell-ECM structures may mimic periosteal cambium and pathological, nonmineralizing osteoid. Importantly, the most commonly used culture conditions (10mM β-glycerophosphate) induce artificial mineralization of all cell-ECM structures, which then become barely distinguishable. We therefore discuss conditions and approaches promoting formation of bona fide bone and simple means for distinguishing it from the other cell-ECM structures. Our findings may improve osteoblast differentiation and function analyses based on 2D cultures and extend applications of these cultures to general bone biology and tissue engineering research. Published 2022. This article is a U.S. Government work and is in the public domain in the USA. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

Interferon-gamma modulates articular chondrocyte and osteoblast metabolism through protein kinase R-independent and dependent mechanisms

Osteoarthritis (OA) affects multiple tissues of the synovial joint and is characterised by articular cartilage degeneration and bone remodelling. Interferon-γ (IFN-γ) is implicated in osteoarthritis pathology exerting its biological effects via various mechanisms including activation of protein kinase R (PKR), which has been implicated in inflammation and arthritis. This study investigated whether treatment of articular cartilage chondrocytes and osteoblasts with IFN-γ could induce a degradative phenotype that was mediated through the PKR signalling pathway. IFN-γ treatment of chondrocytes increased transcription of key inflammatory mediators (TNF-α, IL-6), matrix degrading enzymes (MMP-13), the transcription factor STAT1, and PKR. Activation of PKR was involved in the regulation of TNF-α, IL-6, and STAT1. In osteoblasts, IFN-γ increased human and mouse STAT1, and human IL-6 through a mechanism involving PKR. ALP, COL1A1 (human and mouse), RUNX2 (mouse), and PHOSPHO1 (mouse) were decreased by IFN-γ. The number of PKR positive cells were increased in post-traumatic OA (PTOA). This study has revealed that IFN-γ propagates inflammatory and degenerative events in articular chondrocytes and osteoblasts via PKR activation. Since IFN-γ and PKR signalling are both activated in early PTOA, these mechanisms are likely to contribute to joint degeneration after injury and might offer attractive targets for therapeutic intervention.

•IFN-γ treatment of chondrocytes increased transcription of TNF-α, IL-6, and STAT1 via PKR activation.

•In osteoblasts, IFN-γ increased STAT1 and IL-6 via PKR activation.

•The number of PKR positive cells were increased in post-traumatic OA (PTOA).

•IFN-γ propagates inflammatory and degenerative events in articular chondrocytes and osteoblasts via PKR activation.

•IFN-γ and PKR signalling are both activated in early PTOA and are likely to contribute to joint degeneration after injury.

Naphthenic acid fraction components from oil sands process-affected water from the Athabasca Oil Sands Region impair murine osteoblast differentiation and function

The extraction of bitumen from surface mining in the Athabasca Oil Sands Region (AOSR) produces large quantities of oil sands process-affected water (OSPW) that needs to be stored in settling basins near extraction sites. Chemical constituents of OSPW are known to impair bone health in some organisms, which can lead to increased fracture risk and lower reproductive fitness. Naphthenic acid fraction components (NAFCs) are thought to be among the most toxic class of compounds in OSPW; however, the effect of NAFCs on osteoblast development is largely unknown. In this study, we demonstrate that NAFCs from OSPW inhibit osteoblast differentiation and deposition of extracellular matrix, which is required for bone formation. Extracellular matrix deposition was inhibited in osteoblasts exposed to 12.5-125 mg/L of NAFC for 21 days. We also show that components within NAFCs inhibit the expression of gene markers of osteoblast differentiation and function, namely, alkaline phosphatase (Alp), osteocalcin, and collagen type 1 alpha 1 (Col1a1). These effects were partially mediated by the induction of glucocorticoid receptor (GR) activity; NAFC induces the expression of the GR activity marker genes Sgk1 (12.5 mg/L) and p85a (125 mg/L) and inhibits GR protein (125 mg/L) and Opg RNA (12.5 mg/L) expression. This study provides evidence that NAFC concentrations of 12.5 mg/L and above can directly act on osteoblasts to inhibit bone formation and suggests that NAFCs contain components that can act as GR agonists, which may have further endocrine disrupting effects on exposed wildlife.

Scaffold-based bone tissue engineering in microgravity: potential, concerns and implications

One of humanity's greatest challenges is space exploration, which requires an in-depth analysis of the data continuously collected as a necessary input to fill technological gaps and move forward in several research sectors. Focusing on space crew healthcare, a critical issue to be addressed is tissue regeneration in extreme conditions. In general, it represents one of the hottest and most compelling goals of the scientific community and the development of suitable therapeutic strategies for the space environment is an urgent need for the safe planning of future long-term manned space missions. Osteopenia is a commonly diagnosed disease in astronauts due to the physiological adaptation to altered gravity conditions. In order to find specific solutions to bone damage in a reduced gravity environment, bone tissue engineering is gaining a growing interest. With the aim to critically investigate this topic, the here presented review reports and discusses bone tissue engineering scenarios in microgravity, from scaffolding to bioreactors. The literature analysis allowed to underline several key points, such as the need for (i) biomimetic composite scaffolds to better mimic the natural microarchitecture of bone tissue, (ii) uniform simulated microgravity levels for standardized experimental protocols to expose biological materials to the same testing conditions, and (iii) improved access to real microgravity for scientific research projects, supported by the so-called democratization of space.

Effects of rmBMP-7 on Osteoblastic Cells Grown on a Nanostructured Titanium Surface

This study evaluates the effects of the availability of exogenous BMP-7 on osteoblastic cells’ differentiation on a nanotextured Ti surface obtained by chemical etching (Nano-Ti). The MC3T3-E1 and UMR-106 osteoblastic cell lines were cultured for 5 and 7 days, respectively, on a Nano-Ti surface and on a control surface (Control-Ti) in an osteogenic medium supplemented with either 40 or 200 ng/mL recombinant mouse (rm) BMP-7. The results showed that MC3T3-E1 cells exhibited distinct responsiveness when exposed to each of the two rmBMP-7 concentrations, irrespective of the surface. Even with 40 ng/mL rmBMP-7, important osteogenic effects were noticed for Control-Ti in terms of cell proliferation potential; Runx2, Osx, Alp, Bsp, Opn, and Smad1 mRNA expression; and in situ ALP activity. For Nano-Ti, the effects were limited to higher Alp, Bsp, and Opn mRNA expression and in situ ALP activity. On both surfaces, the osteogenic potential of UMR-106 cultures remained unaltered with 40 ng/mL rmBMP-7, but it was significantly reduced when the cultures were exposed to the 200 ng/mL concentration. The availability of rmBMP-7 to pre-osteoblastic cells at the concentrations used alters the expression profile of osteoblast markers, indicative of the acquisition of a more advanced stage of osteoblastic differentiation. This occurs less pronouncedly on the nanotextured Ti and without reflecting in higher mineralized matrix production by differentiated osteoblasts on both surfaces.

Negative pressure wound therapy improves bone regeneration by promoting osteogenic differentiation via the AMPK-ULK1-autophagy axis

Deficient bone regeneration causes bone defects or nonunion in a substantial proportion of trauma patients that urges for novel therapies. To develop a reliable therapy, we investigated the effect of negative pressure wound therapy (NPWT) on bone regeneration in vivo in a rat calvarial defect model. Negative pressure (NP) treatment in vitro was mimicked to test its effect on osteoblast differentiation in rat mesenchymal stem cells (MSCs) and MC3T3-E1 cells. Transcriptomic analyses, pharmaceutical interventions, and shRNA knockdowns were conducted to explore the underlying mechanism and their clinical relevance was investigated in samples from patients with nonunion. The potential application of a combined therapy of MSCs in hydrogels with negative pressure was tested in the rat critical-size calvarial defect model. We found that NPWT promoted bone regeneration in vivo and NP treatment induced osteoblast differentiation in vitro. NP induced osteogenesis via activating macroautophagy/autophagy by AMPK-ULK1 signaling that was impaired in clinical samples from patients with nonunion. More importantly, the combined therapy involving MSCs in hydrogels with negative pressure significantly improved bone regeneration in rat critical-size calvarial defect model. Thus, our study identifies a novel AMPK-ULK1-autophagy axis by which negative pressure promotes osteoblast differentiation of MSCs and bone regeneration. NPWT treatment can potentially be adopted for therapy of bone defects.Abbreviations: ADP, adenosine diphosphate; AICAR/Aic, acadesine; ALP, alkaline phosphatase; ALPL, alkaline phosphatase, biomineralization associated; AMP, adenosine monophosphate; AMPK, AMP-activated protein kinase; ARS, alizarin red S staining; ATG7, autophagy related 7; ATP, adenosine triphosphate; BA1, bafilomycin A₁; BGLAP/OCN, bone gamma-carboxyglutamate protein; BL, BL-918; BS, bone surface; BS/TV, bone surface per tissue volume; BV/TV, bone volume per tissue volume; C.C, compound C; CCN1, cellular communication network factor 1; COL1A1, collagen type I alpha 1 chain; COL4A3, collagen type IV alpha 3 chain; COL4A4, collagen type IV alpha 4 chain; COL18A1, collagen type XVIII alpha 1 chain; CQ, chloroquine; GelMA, gelatin methacryloyl hydrogel; GO, Gene Ontology; GSEA, gene set enrichment analysis; HIF1A, hypoxia inducible factor 1 subunit alpha; HPLC, high-performance liquid chromatography; ITGAM/CD11B, integrin subunit alpha M; ITGAX/CD11C, integrin subunit alpha X; ITGB1/CdD9, integrin subunit beta 1; KEGG, Kyoto Encyclopedia of Genes and Genomes; MAP1LC3B/LC3B, microtubule associated protein 1 light chain 3 beta; micro-CT, microcomputed tomography; MSCs, mesenchymal stem cells; MTOR, mechanistic target of rapamycin kinase; NP, negative pressure; NPWT, negative pressure wound therapy; PRKAA1/AMPKα1, protein kinase AMP-activated catalytic subunit alpha 1; PRKAA2, protein kinase AMP-activated catalytic subunit alpha 2; PTPRC/CD45, protein tyrosine phosphatase receptor type C; ROS, reactive oxygen species; RUNX2, RUNX family transcription factor 2; SBI, SBI-0206965; SPP1/OPN, secreted phosphoprotein 1; THY1/CD90, Thy-1 cell surface antigen; SQSTM1, sequestosome 1; TGFB3, transforming growth factor beta 3; ULK1/Atg1, unc-51 like autophagy activating kinase 1.

Impact of Fluid Flow Shear Stress on Osteoblast Differentiation and Cross-Talk with Articular Chondrocytes

Bone cells, in particular osteoblasts, are capable of communication with each other during bone growth and homeostasis. More recently it has become clear that they also communicate with other cell-types; including chondrocytes in articular cartilage. One way that this process is facilitated is by interstitial fluid movement within the pericellular and extracellular matrices. This stimulus is also an important mechanical signal in skeletal tissues, and is known to generate shear stresses at the micron-scale (known as fluid flow shear stresses (FFSS)). The primary aim of this study was to develop and characterize an in vitro bone–cartilage crosstalk system, to examine the effect of FFSS on these cell types. Specifically, we evaluated the response of osteoblasts and chondrocytes to FFSS and the effect of FFSS-induced soluble factors from the former, on the latter. This system will ultimately be used to help us understand the role of subchondral bone damage in articular cartilage degeneration. We also carried out a comparison of responses between cell lines and primary murine cells in this work. Our findings demonstrate that primary cells produce a more reliable and reproducible response to FFSS. Furthermore we found that at lower magnitudes , direct FFSS produces anabolic responses in both chondrocytes and osteoblasts, whereas higher levels produce more catabolic responses. Finally we show that exposure to osteoblast-derived factors in conditioned media experiments produced similarly catabolic changes in primary chondrocytes.

Lysyl hydroxylase 2 mediated collagen post-translational modifications and functional outcomes

Lysyl hydroxylase 2 (LH2) is a member of LH family that catalyzes the hydroxylation of lysine (Lys) residues on collagen, and this particular isozyme has been implicated in various diseases. While its function as a telopeptidyl LH is generally accepted, several fundamental questions remain unanswered: 1. Does LH2 catalyze the hydroxylation of all telopeptidyl Lys residues of collagen? 2. Is LH2 involved in the helical Lys hydroxylation? 3. What are the functional consequences when LH2 is completely absent? To answer these questions, we generated LH2-null MC3T3 cells (LH2KO), and extensively characterized the type I collagen phenotypes in comparison with controls. Cross-link analysis demonstrated that the hydroxylysine-aldehyde (Hyl^ald)-derived cross-links were completely absent from LH2KO collagen with concomitant increases in the Lys^ald-derived cross-links. Mass spectrometric analysis revealed that, in LH2KO type I collagen, telopeptidyl Lys hydroxylation was completely abolished at all sites while helical Lys hydroxylation was slightly diminished in a site-specific manner. Moreover, di-glycosylated Hyl was diminished at the expense of mono-glycosylated Hyl. LH2KO collagen was highly soluble and digestible, fibril diameters were diminished, and mineralization impaired when compared to controls. Together, these data underscore the critical role of LH2-catalyzed collagen modifications in collagen stability, organization and mineralization in MC3T3 cells.

MicroRNA-101a enhances trabecular bone accrual in male mice

High-throughput microRNA sequencing was performed during differentiation of MC3T3-E1 osteoblasts to develop working hypotheses for specific microRNAs that control osteogenesis. The expression data show that miR-101a, which targets the mRNAs for the epigenetic enzyme Ezh2 and many other proteins, is highly upregulated during osteoblast differentiation and robustly expressed in mouse calvaria. Transient elevation of miR-101a suppresses Ezh2 levels, reduces tri-methylation of lysine 27 in histone 3 (H3K27me3; a heterochromatic mark catalyzed by Ezh2), and accelerates mineralization of MC3T3-E1 osteoblasts. We also examined skeletal phenotypes of an inducible miR-101a transgene under direct control of doxycycline administration. Experimental controls and mir-101a over-expressing mice were exposed to doxycycline in utero and postnatally (up to 8 weeks of age) to maximize penetrance of skeletal phenotypes. Male mice that over-express miR-101a have increased total body weight and longer femora. MicroCT analysis indicate that these mice have increased trabecular bone volume fraction, trabecular number and trabecular thickness with reduced trabecular spacing as compared to controls. Histomorphometric analysis demonstrates a significant reduction in osteoid volume to bone volume and osteoid surface to bone surface. Remarkably, while female mice also exhibit a significant increase in bone length, no significant changes were noted by microCT (trabecular bone parameters) and histomorphometry (osteoid parameters). Hence, miR-101a upregulation during osteoblast maturation and the concomitant reduction in Ezh2 mediated H3K27me3 levels may contribute to the enhanced trabecular bone parameters in male mice. However, the sex-specific effect of miR-101a indicates that more intricate epigenetic mechanisms mediate physiological control of bone formation and homeostasis.

Effects of Aldo-Keto Reductase Family 1 Member A on Osteoblast Differentiation Associated with Lactate Production in MC3T3-E1 Preosteoblastic Cells

Aldo-keto reductase family 1 member A (AKR1A) is an NADPH-dependent aldehyde reductase widely expressed in mammalian tissues. In this study, induced differentiation of MC3T3-E1 preosteoblasts was found to increase AKR1A gene expression concomitantly increased NOx- (nitrite+nitrate), increased glucose uptake, increased [NAD(P)+]/[NAD(P)H] and lactate production but decreased reactive oxygen species (ROS) without changes in eNOS (endothelial nitric oxide synthase) expression in differentiated osteoblasts (OBs). A study using gain- and loss-of-function MC3T3-E1 cells indicated that AKR1A is essential for modulating OB differentiation and gene expression of collagen1 A1, receptor activator of nuclear factor kappa-Β ligand, and osteoprotegerin in OBs. Immunofluorescence microscopy also revealed that changes in AKR1A expression altered extracellular collagen formation in differentiated OBs. Consistently, analyses of alkaline phosphatase activity and calcium deposits of matrix mineralization by Alizarin Red S staining verified that AKR1A is involved in the regulation of OB differentiation and bone matrix formation. In addition, AKR1A gene alterations affected the levels of NOx-, eNOS expression, glucose uptake, [NAD(P)+]/[NAD(P)H] dinucleotide redox couples, lactate production and ROS in differentiated OBs. Herein, we report that AKR1A-mediated denitrosylation may play a role in the regulation of lactate metabolism as well as redox homeostasis in cells, providing an efficient way to quickly gain energy and to significantly reduce oxidative stress for OB differentiation.

The Effect of Osteoblast Isolation Methods from Adult Rats on Osteoclastogenesis in Co-Cultures

Co-cultures of osteoblasts and osteoclasts are on the rise because they enable a more complex study. Diseases such as osteoporosis are related to a higher age. Thus, cell isolation from adult individuals is necessary. Osteoblasts can be isolated from the rat femur by three methods: explant culture, explant culture with enzymatic pre-treatment, or enzymatic treatment. The isolation methods yield different populations of osteoblasts which, in a co-culture with peripheral blood mononuclear cells, might result in differences in osteoclastogenesis. Therefore, we examined the differences in osteogenic markers, cell proliferation, and the metabolic activity of isolated osteoblast-like cells in a growth and differentiation medium. We then evaluated the effect of the isolated populations of osteoblast-like cells on osteoclastogenesis in a subsequent co-culture by evaluating osteoclast markers, counting formed osteoclast-like cells, and analyzing their area and number of nuclei. Co-cultures were performed in the presence or absence of osteoclastogenic growth factors, M-CSF and RANKL. It was discovered that enzymatic isolation is not feasible in adult rats, but explant culture and explant culture with enzymatic pre-treatment were both successful. Explant culture with enzymatic pre-treatment yielded cells with a higher proliferation than explant culture in a growth medium. The differentiation medium reduced differences in proliferation during the culture. Some differences in metabolic activity and ALP activity were also found between the osteoblast-like cells isolated by explant culture or by explant culture with enzymatic pre-treatment, but only on some days of cultivation. According to microscopy, the presence of exogenous growth factors supporting osteoclastogenesis in co-cultures was necessary for the formation of osteoclast-like cells. In this case, the formation of a higher number of osteoclast-like cells with a larger area was observed in the co-culture with osteoblast-like cells isolated by explant culture compared to the explant culture with enzymatic pre-treatment. Apart from this observation, no differences in osteoclast markers were noted between the co-cultures with osteoblast-like cells isolated by explant culture and the explant culture with enzymatic pre-treatment. The TRAP and CA II activity was higher in the co-cultures with exogenous growth than that in the co-cultures without exogenous growth factors on day 7, but the opposite was true on day 14. To conclude, explant culture and explant culture with enzymatic pre-treatment are both suitable methods to yield osteoblast-like cells from adult rats capable of promoting osteoclastogenesis in a direct co-culture with peripheral blood mononuclear cells. Explant culture with enzymatic pre-treatment yielded cells with a higher proliferation. The explant culture yielded osteoblast-like cells which induced the formation of a higher number of osteoclast-like cells with a larger area compared to the explant culture with enzymatic pre-treatment when cultured with exogenous M-CSF and RANKL.

Effects of Scoparone on differentiation, adhesion, migration, autophagy and mineralization through the osteogenic signalling pathways

Scoparone (SCOP), an active and efficient coumarin compound derived from Artemisia capillaris Thunb, has been used as a traditional Chinese herbal medicine. Herein, we investigated the effects of SCOP on the osteogenic processes using MC3T3‐E1 pre‐osteoblasts in in vitro cell systems. SCOP (C₁₁H₁₀O₄, > 99.17%) was purified and identified from A. capillaries. SCOP (0.1 to 100 μM concentrations) did not have cytotoxic effects in pre‐osteoblasts; however, it promoted alkaline phosphatase (ALP) staining and activity, and mineralized nodule formation under early and late osteogenic induction. SCOP elevated osteogenic signals through the bone morphogenetic protein 2 (BMP2)‐Smad1/5/8 pathway, leading to the increased expression of runt‐related transcription factor 2 (RUNX2) with its target protein, matrix metallopeptidase 13 (MMP13). SCOP also induced the non‐canonical BMP2‐MAPKs pathway, but not the Wnt3a‐β‐catenin pathway. Moreover, SCOP promoted autophagy, migration and adhesion under the osteogenic induction. Overall, the findings of this study demonstrated that SCOP has osteogenic effects associated with cell differentiation, adhesion, migration, autophagy and mineralization.

A Polyplex in a Shell: The Effect of Poly(aspartic acid)-Mediated Calcium Carbonate Mineralization on Polyplexes Properties and Transfection Efficiency

Mineralization by exposure of organic templates to supersaturated solutions is used by many living organisms to generate specialized materials to perform structural or protective functions. Similarly, it was suggested that improved robustness acquired through mineralization under natural conditions could be an important factor for virus survival outside of a host for better transfection of cells. Here, inspired by this fact, we developed a nonviral tricomponent polyplex system for gene delivery capable of undergoing mineralization. First, we fabricated anionic polyplexes carrying pDNA by self-assembly with a lipid-modified cationic polymer and coating by poly(aspartic acid). Then, we submitted the polyplexes to a two-step mineralization reaction to precipitate CaCO₃ under various supersaturations. We carried out detailed morphological studies of the mineralized polyplexes and identified which parameters of the fabrication process were influential on transfection efficiency. We found that mineralization with CaCO₃ is efficient in promoting transfection efficiency as long as a certain Ca²⁺/CO₃^2- lower limit ratio is respected. However, calcium incubation can also be used to achieve similar effects at higher concentrations depending on polyplex composition, probably due to the formation of physical cross-links by calcium binding to poly(aspartic acid). We proposed that the improved robustness and transfection efficiency provided by means of mineralization can be used to expand the possible applications of polyplexes in gene therapy.

Trigeminal neurons control immune-bone cell interaction and metabolism in apical periodontitis

Abstract

Apical periodontitis (AP) is an inflammatory disease occurring following tooth infection with distinct osteolytic activity. Despite increasing evidence that sensory neurons participate in regulation of non-neuronal cells, their role in the development of AP is largely unknown. We hypothesized that trigeminal ganglia (TG) Nav1.8⁺ nociceptors regulate bone metabolism changes in response to AP. A selective ablation of nociceptive neurons in Nav1.8^Cre/Diphtheria toxin A (DTA)^Lox mouse line was used to evaluate the development and progression of AP using murine model of infection-induced AP. Ablation of Nav1.8⁺ nociceptors had earlier progression of AP with larger osteolytic lesions. Immunohistochemical and RNAscope analyses demonstrated greater number of macrophages, T-cells, osteoclast and osteoblast precursors and an increased RANKL:OPG ratio at earlier time points among Nav1.8^Cre/ DTA^Lox mice. There was an increased expression of IL-1α and IL-6 within lesions of nociceptor-ablated mice. Further, co-culture experiments demonstrated that TG neurons promoted osteoblast mineralization and inhibited osteoclastic function. The findings suggest that TG Nav1.8⁺ neurons contribute to modulation of the AP development by delaying the influx of immune cells, promoting osteoblastic differentiation, and decreasing osteoclastic activities. This newly uncovered mechanism could become a therapeutic strategy for the treatment of AP and minimize the persistence of osteolytic lesions in refractory cases.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s00018-022-04335-w.

Bone Mineralization in Electrospun-Based Bone Tissue Engineering

Increasing the demand for bone substitutes in the management of bone fractures, including osteoporotic fractures, makes bone tissue engineering (BTE) an ideal strategy for solving the constant shortage of bone grafts. Electrospun-based scaffolds have gained popularity in BTE because of their unique features, such as high porosity, a large surface-area-to-volume ratio, and their structural similarity to the native bone extracellular matrix (ECM). To imitate native bone mineralization through which bone minerals are deposited onto the bone matrix, a simple but robust post-treatment using a simulated body fluid (SBF) has been employed, thereby improving the osteogenic potential of these synthetic bone grafts. This study highlights recent electrospinning technologies that are helpful in creating more bone-like scaffolds, and addresses the progress of SBF development. Biomineralized electrospun bone scaffolds are also reviewed, based on the importance of bone mineralization in bone regeneration. This review summarizes the potential of SBF treatments for conferring the biphasic features of native bone ECM architectures onto electrospun-based bone scaffolds.

An miRNA derived from amelogenin exon4 regulates expression of transcription factor Runx2 by directly targeting upstream activators Nfia and Prkch

Amel, the gene encoding the amelogenin protein involved in enamel formation, is highly alternatively spliced. When exon4 is excised, it can form a mature miRNA (miR-exon4) that has previously been suggested to indirectly regulate expression of the Runt-related transcription factor 2 (Runx2) involved in bone development in ameloblasts and osteoblasts. However, the precise mechanism of this regulation is unclear. In this study, we aimed to identify direct targets of miR-exon4. The transcription factor family nuclear factor I/A (NFI/A) is known to negatively regulate expression of Runx2 and is among the most highly predicted direct targets of miR-exon4 that link to Runx2. Immunostaining detected NFI/A in osteoblasts and ameloblasts in vivo, and reporter assays confirmed direct interaction of the Nfia 3'-UTR and miR-exon4. In addition, silencing of Nfia in MC3T3-E1-M14 osteoblasts resulted in subsequent downregulation of Runx2. In a monoclonal subclone (mi2) of MC3T3-E1 cells wherein mature miR-exon4 was functionally inhibited, we observed significantly downregulated Runx2 expression. We showed that NFI/A was significantly upregulated in mi2 cells at both mRNA and protein levels. Furthermore, quantitative proteomics and pathway analysis of gene expression in mi2 cells suggested that miR-exon4 could directly target Prkch (protein kinase C-eta), possibly leading to RUNX2 regulation through mechanistic target of rapamycin kinase activation. Reporter assays also confirmed the direct interaction of miR-exon4 and the 3'-UTR of Prkch, and Western blot analysis confirmed significantly upregulated mechanistic target of rapamycin kinase phosphorylation in mi2 cells. Taken together, we conclude that Nfia and Prkch expression negatively correlates with miR-exon4-mediated Runx2 regulation in vivo and in vitro, suggesting miR-exon4 directly targets Nfia and Prkch to regulate Runx2.

GFI1-Dependent Repression of SGPP1 Increases Multiple Myeloma Cell Survival

Simple Summary

New therapies have greatly improved the progression-free and overall survival for patients with “standard risk” multiple myeloma (MM). However, patients with “high risk” MM, in particular patients whose MM cells harbor non-functional p53, have very short survival times because of the early relapse and rapid development of highly therapy-resistant MM. In this report, we identify a novel mechanism responsible for Growth Factor Independence-1 (GFI1) regulation of the growth and survival of MM cells through its modulation of sphingolipid metabolism, regardless of their p53 status. We identify the Sphingosine-1-Phosphate Phosphatase (SGPP1) gene as a novel direct target of GFI1 transcriptional repression in MM cells, thus increasing intracellular sphingosine-1-phosphate levels, which stabilizes c-Myc. Our results support GFI1 as an attractive therapeutic target for all types of MM, including the “high risk” patient population with non-functional p53, as well as a possible therapeutic approach for other types of cancers expressing high levels of c-Myc.

Abstract

Multiple myeloma (MM) remains incurable for most patients due to the emergence of drug resistant clones. Here we report a p53-independent mechanism responsible for Growth Factor Independence-1 (GFI1) support of MM cell survival by its modulation of sphingolipid metabolism to increase the sphingosine-1-phosphate (S1P) level regardless of the p53 status. We found that expression of enzymes that control S1P biosynthesis, SphK1, dephosphorylation, and SGPP1 were differentially correlated with GFI1 levels in MM cells. We detected GFI1 occupancy on the SGGP1 gene in MM cells in a predicted enhancer region at the 5’ end of intron 1, which correlated with decreased SGGP1 expression and increased S1P levels in GFI1 overexpressing cells, regardless of their p53 status. The high S1P:Ceramide intracellular ratio in MM cells protected c-Myc protein stability in a PP2A-dependent manner. The decreased MM viability by SphK1 inhibition was dependent on the induction of autophagy in both p53WT and p53mut MM. An autophagic blockade prevented GFI1 support for viability only in p53mut MM, demonstrating that GFI1 increases MM cell survival via both p53WT inhibition and upregulation of S1P independently. Therefore, GFI1 may be a key therapeutic target for all types of MM that may significantly benefit patients that are highly resistant to current therapies.

Evolving cancer-niche interactions and therapeutic targets during bone metastasis

Many cancer types metastasize to bone. This propensity may be a product of genetic traits of the primary tumour in some cancers. Upon arrival, cancer cells establish interactions with various bone-resident cells during the process of colonization. These interactions, to a large degree, dictate cancer cell fates at multiple steps of the metastatic cascade, from single cells to overt metastases. The bone microenvironment may even influence cancer cells to subsequently spread to multiple other organs. Therefore, it is imperative to spatiotemporally delineate the evolving cancer-bone crosstalk during bone colonization. In this Review, we provide a summary of the bone microenvironment and its impact on bone metastasis. On the basis of the microscopic anatomy, we tentatively define a roadmap of the journey of cancer cells through bone relative to various microenvironment components, including the potential of bone to function as a launch pad for secondary metastasis. Finally, we examine common and distinct features of bone metastasis from various cancer types. Our goal is to stimulate future studies leading to the development of a broader scope of potent therapies.

Inhibition of TET-mediated DNA demethylation suppresses osteoblast differentiation

DNA methylation is an epigenetic modification critical for the regulation of chromatin structure and gene expression during development and disease. The ten-eleven translocation (TET) enzyme family catalyzes the hydroxymethylation and subsequent demethylation of DNA by oxidizing 5-methylcytosine (5mC) to 5-hydroxymethylcytosine (5hmC). Little is known about TET protein function due to a lack of pharmacological tools to manipulate DNA hydroxymethylation levels. In this study, we examined the role of TET-mediated DNA hydroxymethylation during BMP-induced C2C12 osteoblast differentiation using a novel cytosine-based selective TET enzyme inhibitor, Bobcat339 (BC339). Treatment of C2C12 cells with BC339 increased global 5mC and decreased global 5hmC without adversely affecting cell viability, proliferation, or apoptosis. Furthermore, BC339 treatment inhibited osteoblast marker gene expression and decreased alkaline phosphatase activity during differentiation. Methylated DNA immunoprecipitation and bisulfite sequencing showed that inhibition of TET with BC339 led to increased 5mC at specific CpG-rich regions at the promoter of Sp7, a key osteoblast transcription factor. Consistent with promoter 5mC marks being associated with transcriptional repression, luciferase activity of an Sp7-promoter-reporter construct was repressed by in vitro DNA methylation or BC339. Chromatin immunoprecipitation analysis confirmed that TET2 does indeed occupy the promoter region of Sp7. Accordingly, forced overexpression of SP7 rescued the inhibition of osteogenic differentiation by BC339. In conclusion, our data suggest that TET-mediated DNA demethylation of genomic regions, including the Sp7 promoter, plays a role in the initiation of osteoblast differentiation. Furthermore, BC339 is a novel pharmacological tool for the modulation of DNA methylation dynamics for research and therapeutic applications.

Fuel Flowrate Control for Aeroengine and Fuel Thermal Management for Airborne System of Aircraft—An Overview

Fuel flowrate control system and fuel thermal management are very important for aeroengine and the overall aircraft, and it has been researched for several decades. This survey paper makes a comprehensive and systematic overview on the exiting fuel flowrate regulation methods, thermal load of fuel metering units, fuel-based thermal management, and the fuel tank’s thermal management topology network with drain and recirculation. This paper firstly reviews the mechanism, technical advantages, and technical challenges of the fuel metering unit with flowrate control valve and constant pressure difference valve compensator, flowrate control valve and variable displacement pump-based pressure difference compensator, and motor-based flowrate regulation. Then, the technical characteristics of above fuel flowrate control methods related to thermal management are discussed and compared. Meanwhile, the behaviors of recirculated fuel flow within single tank system and dual tank system are explored. Thirdly, the paper discusses the future directions of fuel flowrate control and thermal management. The survey is significant to the fuel flowrate control and fuel thermal management of the aircraft.

Biocompatible Customized 3D Bone Scaffolds Treated with CRFP, an Osteogenic Peptide

BACKGROUND

Currently used synthetic bone graft substitutes (BGS) are either too weak to bear the principal load or if metallic, they can support loading, but can lead to stress shielding and are unable to integrate fully. In this study, we developed biocompatible, 3D printed scaffolds derived from µCT images of the bone that can overcome these issues and support the growth of osteoblasts.

METHODS

Cylindrical scaffolds were fabricated with acrylonitrile butadiene styrene (ABS) and Stratasys^® MED 610 (MED610) materials. The 3D-printed scaffolds were seeded with Mus musculus calvaria cells (MC3T3). After the cells attained confluence, osteogenesis was induced with and without the addition of calcitonin receptor fragment peptide (CRFP) and the bone matrix production was analyzed. Mechanical compression testing was carried out to measure compressive strength, stiffness, and elastic modulus.

RESULTS

For the ABS scaffolds, there was a 9.8% increase in compressive strength (p < 0.05) in the scaffolds with no pre-coating and the treatment with CRFP, compared to non-treated scaffolds. Similarly, MED610 scaffolds treated with CRFP showed an 11.9% (polylysine pre-coating) and a 20% (no pre-coating) increase (p < 0.01) in compressive strength compared to non-treated scaffolds.

CONCLUSIONS

MED610 scaffolds are excellent BGS as they support osteoblast growth and show enhanced bone growth with enhanced compressive strength when augmented with CRFP.

Clonal osteoblastic cell lines with CRISPR/Cas9-mediated ablation of Pit1 or Pit2 show enhanced mineralization despite reduced osteogenic gene expression

Multiple actions of extracellular Pi on the skeletal cells are likely to be partly mediated by type III sodium/phosphate (Na⁺/Pi) cotransporters Pit1 and Pit2, although the details are not fully understood. In the current study, to determine the roles of Pit1 and Pit2 in osteoblasts, we generated Pit1-knockout (KO) and Pit2-KO osteoblastic cells by applying CRISPR/Cas9 genome editing to an osteoblastic cell line MC3T3-E1 subclone 4. The extracellular Pi level was increased in the Pit1-KO and Pit2-KO clones due to the reduced Pi uptake. Interestingly, in vitro mineralization was accelerated in the Pit1-KO and Pit2-KO clones, although the induction of the expression of osteogenic marker genes was suppressed. In the cells before mineralization, extracellular levels of pyrophosphate (PPi) and adenosine triphosphate (ATP) were increased in the Pit1-KO and Pit2-KO clones, which might be attributable to the reduced expression and activity of tissue-nonspecific alkaline phosphatase (TNSALP). A 24-h treatment with high Pi reduced the expression and activity of TNSALP, suggesting that the suppression of TNSALP in the Pit1-KO and Pit2-KO clones was caused by the increased availability of extracellular Pi. Lentiviral gene transfer of Pit1 and Pit2 restored the changes observed in Pit1-KO and Pit2-KO clones, respectively. The expressions of P2Y2 and P2X7 which encode receptors for extracellular ATP were altered in the Pit1-KO and Pit2-KO clones, suggesting an influence on purinergic signaling. In mineralized cells after long-term culture, intracellular levels of PPi and ATP were higher in the Pit1-KO and Pit2-KO clones. Taken together, ablation of Pit1 or Pit2 in this osteoblastic cell model led to accelerated mineralization, suppressed TNSALP and altered the levels of extracellular and intracellular PPi and ATP, which might be partly mediated by changes in the availability of extracellular Pi.

Comparative gene expression analysis for pre-osteoblast MC3T3-E1 cells under non-adhesive culture toward osteocyte differentiation

Osteocytes play an important role to modulate the bone remodeling and are also known as terminally differentiated cells originated from the osteoblast precursor cells, but its differentiation mechanism remains unclear. Since an efficient in vitro method to evoke the osteocyte differentiation from the osteoblast precursor cells has not been established, we conducted the comparative gene expression analysis for mouse pre-osteoblast MC3T3-E1 cells in order to elucidate the key factors to induce the osteocyte differentiation from the pre-osteoblast cells. In this study, we prepared four different culture environments by modulating their cell-substrate interaction and cell-cell interaction; (i) low and (ii) high cell density on the adhesive culture models, and (iii) low and (iv) high cell density on the non-adhesive floating culture models. By comparing these conditions in terms of cell-substrate and cell-cell interaction, we showed that the elimination of cell-substrate interaction under non-adhesive floating culture greatly up-regulated the gene expression of osteocyte markers in the pre-osteoblast cells. Moreover, the presence of moderate cell-cell interaction in the non-adhesive spheroid culture further enhanced the up-regulation of osteocyte markers for the pre-osteoblast cells. The results altogether suggest the most appropriate culture environment to induce the in vitro osteocyte differentiation of pre-osteoblast cells.

Morphological switch is associated with increase in cell-cell contacts, ALP, and confluence above a minimum island area to perimeter ratio

During osteogenic differentiation in vitro, stem-like cells seeded at a low-density spread and are isolated. As the cells proliferate and mature, they become more cuboidal in shape with more cell-cell contacts. However, the coordination of this switch in cell morphology from elongated to cuboidal, cell-cell contacts, and differentiation is not known. In this work, we present results from experiments and a simulation of cell proliferation on protein-micropatterned islands that, independent of island size (25-1,000 μm) or shape (circles, squares, and hollow squares), shows a distinct morphological switch that is better described as a function of island confluence than time in culture, the standard measure in cell culture experiments. The simulation and experiments show cell morphology and island cell density versus confluence collapse to a single curve for all islands if the island area to perimeter ratio is ≥25 μm. Cell-cell contacts in the simulation and alkaline phosphatase (ALP) expression in experiments, a common marker for osteogenic differentiation, show exponential growth with confluence, rapidly increasing after the switch at ≈0.5 confluence. Furthermore, cell morphology, density, contacts, and ALP are better predicted by confluence than time in culture. The variability with time in culture leads to challenges in not only interpreting data but also in comparing data across research laboratories. This simulation can be used to predict cell behavior on different size and shape islands and to plan and optimize experiments that explore cell behavior as a function of a wide range of island geometries.

Short carboxyl terminal parathyroid hormone peptides modulate human parathyroid hormone signaling in mouse osteoblasts

BACKGROUND

Novel human parathyroid hormone (hPTH) peptides of unknown biological activity have recently been identified in the serum of subjects with normal renal function, chronic renal failure, and end-stage renal disease through the application of liquid chromatography-high resolution mass spectrometry.

PURPOSE

of experiments: To determine the bioactivity of these peptides, we synthesized hPTH28-84, hPTH38-84, and hPTH45-84 peptides by solid phase peptide synthesis and tested their bioactivity in MC3T3-E1 mouse osteoblasts, either individually or together with the native hormone, hPTH1-84, by assessing the accumulation of 3´,5´-cyclic adenosine monophosphate (cAMP) and the induction of alkaline phosphatase activity.

RESULTS

Increasing doses of hPTH1-84 (1-100 nM) increased the accumulation of cAMP and alkaline phosphatase activity in osteoblasts. hPTH28-84, hPTH38-84, and hPTH45-84 in concentrations of 1-100 nM were biologically inert. Surprisingly, 100 nM hPTH38-84 and hPTH45-84 increased the accumulation of cAMP in osteoblasts treated with increasing amounts of hPTH1-84. Human PTH28-84 had no effects on cAMP activity alone or in combination with hPTH1-84. Conversely, 100 nM hPTH38-84, hPTH45-84, and hPTH28-84 blocked the activation of alkaline phosphatase activity by hPTH1-84.

CONCLUSIONS

The data show that the short carboxyl-terminal hPTH peptides, hPTH38-84 and hPTH45-84, increase the amount of cellular cAMP generated in cultured osteoblasts in response to treatment with full-length hPTH1-84 when compared to full-length hPTH1-84 alone. Human PTH28-84 had no effect on cAMP activity alone or in combination with hPTH1-84. Human PTH28-84, hPTH38-84 and hPTH45-84 reduced the effects of hPTH1-84 in osteoblasts with respect to the induction of alkaline phosphatase activity compared to hPTH1-84 alone. Short carboxyl peptides of human PTH are biologically inert but when administered together with full-length hPTH1-84 modulate the bioactivity of hPTH1-84 in osteoblasts.