1
|
Hekimoğlu M, Özer H, Kiraz K, Onursal C, Siyahcan F, Özer AF. Surface hardening of Ti-Al-V superalloy spinal implant by using the boronization method. Biomed Mater Eng 2024; 35:39-52. [PMID: 37545207 DOI: 10.3233/bme-230033] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 08/08/2023]
Abstract
BACKGROUND We compared the raw Ti-Al-V super alloy transpedicular implant screws with boronized and surface-hardened transpedicular implant screws. OBJECTIVE To improve patients' postoperative prognosis with the production of harder and less fragile screws. METHODS Surface hardening was achieved by applying green-body encapsulation of the specimen with elemental boron paste which is sintered at elevated temperatures to ensure the boron-metal diffusion. Boron transported into the Ti-Al-V super alloy matrix gradually while suppressing aluminum and a homogeneously boronized surface with a thickness of ∼15 microns was obtained. The uniform external shell was enriched with TiB2, which is one of the hardest ceramics. The Ti-Al-V core material, where boron penetration diminishes, shows cohesive transition and ensures intact core-surface structure. RESULTS Scanning electron microscope images confirmed a complete homogeneous, uniform and non-laminating surface formation. Energy-dispersive X-ray monitored the elemental structural mapping and proved the replacement of the aluminum sites on the surface with boron ending up the TiB2. The procedure was 8.6 fold improved the hardness and the mechanical resistance of the tools. CONCLUSIONS Surface-hardened, boronized pedicular screws can positively affect the prognosis. In vivo studies are needed to prove the safety of use.
Collapse
Affiliation(s)
- Mehdi Hekimoğlu
- Neurosurgery Department, American Hospital, Istanbul, Turkey
| | - Hıdır Özer
- Neurosurgery Department, School of Medicine, Ordu University, Ordu, Turkey
| | - Kamil Kiraz
- PAVTEC - Pavezyum Technical Ceramics, Kocaeli, Turkey
- Chemistry Department, Koc University, Istanbul, Turkey
| | - Ceylan Onursal
- Department of Pharmacology, Faculty of Pharmacy, Ege University, Izmir, Turkey
| | - Ferit Siyahcan
- Department of Metallurgy and Materials Engineering, Istanbul Technical University, Istanbul, Turkey
| | - Ali Fahir Özer
- Neurosurgery Department, School of Medicine, Koc University, Istanbul, Turkey
| |
Collapse
|
2
|
McCue C, Atari A, Parks S, Tseng YY, Varanasi KK. Reducing Cancer Cell Adhesion using Microtextured Surfaces. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2302401. [PMID: 37559167 DOI: 10.1002/smll.202302401] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/21/2023] [Revised: 06/30/2023] [Indexed: 08/11/2023]
Abstract
For the past century, trypsin has been the primary method of cell dissociation, largely without any major changes to the process. Enzymatic cell detachment strategies for large-scale cell culturing processes are popular but can be labor-intensive, potentially lead to the accumulation of genetic mutations, and produce large quantities of liquid waste. Therefore, engineering surfaces to lower cell adhesion strength could enable the next generation of cell culture surfaces for delicate primary cells and automated, high-throughput workflows. In this study, a process for creating microtextured polystyrene (PS) surfaces to measure the impact of microposts on the adhesion strength of cells is developed. Cell viability and proliferation assays show comparable results in two cancer cell lines between micropost surfaces and standard cell culture vessels. However, cell image analysis on microposts reveals that cell area decreases by half, and leads to an average twofold increase in cell length per area. Using a microfluidic-based method up to a seven times greater percentage of cells are removed from micropost surfaces than the flat control surfaces. These results show that micropost surfaces enable decreased cell adhesion strength while maintaining similar cell viabilities and proliferation as compared to flat PS surfaces.
Collapse
Affiliation(s)
- Caroline McCue
- Department of Mechanical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA, 02139, USA
| | - Adel Atari
- Cancer Program, Broad Institute of Harvard and MIT, 415 Main St, Cambridge, MA, 02142, USA
| | - Sean Parks
- Department of Mechanical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA, 02139, USA
| | - Yuen-Yi Tseng
- Cancer Program, Broad Institute of Harvard and MIT, 415 Main St, Cambridge, MA, 02142, USA
| | - Kripa K Varanasi
- Department of Mechanical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA, 02139, USA
- Cancer Program, Broad Institute of Harvard and MIT, 415 Main St, Cambridge, MA, 02142, USA
| |
Collapse
|
3
|
Stocco TD, Zhang T, Dimitrov E, Ghosh A, da Silva AMH, Melo WCMA, Tsumura WG, Silva ADR, Sousa GF, Viana BC, Terrones M, Lobo AO. Carbon Nanomaterial-Based Hydrogels as Scaffolds in Tissue Engineering: A Comprehensive Review. Int J Nanomedicine 2023; 18:6153-6183. [PMID: 37915750 PMCID: PMC10616695 DOI: 10.2147/ijn.s436867] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/24/2023] [Accepted: 10/12/2023] [Indexed: 11/03/2023] Open
Abstract
Carbon-based nanomaterials (CBNs) are a category of nanomaterials with various systems based on combinations of sp2 and sp3 hybridized carbon bonds, morphologies, and functional groups. CBNs can exhibit distinguished properties such as high mechanical strength, chemical stability, high electrical conductivity, and biocompatibility. These desirable physicochemical properties have triggered their uses in many fields, including biomedical applications. In this review, we specifically focus on applying CBNs as scaffolds in tissue engineering, a therapeutic approach whereby CBNs can act for the regeneration or replacement of damaged tissue. Here, an overview of the structures and properties of different CBNs will first be provided. We will then discuss state-of-the-art advancements of CBNs and hydrogels as scaffolds for regenerating various types of human tissues. Finally, a perspective of future potentials and challenges in this field will be presented. Since this is a very rapidly growing field, we expect that this review will promote interdisciplinary efforts in developing effective tissue regeneration scaffolds for clinical applications.
Collapse
Affiliation(s)
- Thiago Domingues Stocco
- Bioengineering Program, Scientific and Technological Institute, Brazil University, São Paulo, SP, Brazil
| | - Tianyi Zhang
- Pennsylvania State University, University Park, PA, USA
| | | | - Anupama Ghosh
- Department of Chemical and Materials Engineering (DEQM), Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazil
| | | | - Wanessa C M A Melo
- FTMC, State Research institute Center for Physical Sciences and Technology, Department of Functional Materials and Electronics, Vilnius, Lithuanian
| | - Willian Gonçalves Tsumura
- Bioengineering Program, Scientific and Technological Institute, Brazil University, São Paulo, SP, Brazil
| | - André Diniz Rosa Silva
- FATEC, Ribeirão Preto, SP, Brazil
- Interdisciplinary Laboratory for Advanced Materials (LIMAV), BioMatLab Group, Materials Science and Engineering Graduate Program, Federal University of Piauí (UFPI), Teresina, PI, Brazil
| | - Gustavo F Sousa
- Interdisciplinary Laboratory for Advanced Materials (LIMAV), BioMatLab Group, Materials Science and Engineering Graduate Program, Federal University of Piauí (UFPI), Teresina, PI, Brazil
| | - Bartolomeu C Viana
- Interdisciplinary Laboratory for Advanced Materials (LIMAV), BioMatLab Group, Materials Science and Engineering Graduate Program, Federal University of Piauí (UFPI), Teresina, PI, Brazil
| | | | - Anderson Oliveira Lobo
- Interdisciplinary Laboratory for Advanced Materials (LIMAV), BioMatLab Group, Materials Science and Engineering Graduate Program, Federal University of Piauí (UFPI), Teresina, PI, Brazil
| |
Collapse
|
4
|
Yang X, Xu G, Liu X, Zhou G, Zhang B, Wang F, Wang L, Li B, Li L. Carbon nanomaterial-involved EMT and CSC in cancer. REVIEWS ON ENVIRONMENTAL HEALTH 2023; 38:1-13. [PMID: 34619029 DOI: 10.1515/reveh-2021-0082] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/18/2021] [Accepted: 09/26/2021] [Indexed: 06/13/2023]
Abstract
Carbon nanomaterials (CNMs) are ubiquitous in our daily lives because of the outstanding physicochemical properties. CNMs play curial parts in industrial and medical fields, however, the risks of CNMs exposure to human health are still not fully understood. In view of, it is becoming extremely difficult to ignore the existence of the toxicity of CNMs. With the increasing exploitation of CNMs, it's necessary to evaluate the potential impact of these materials on human health. In recent years, more and more researches have shown that CNMs are contributed to the cancer formation and metastasis after long-term exposure through epithelial-mesenchymal transition (EMT) and cancer stem cells (CSCs) which is associated with cancer progression and invasion. This review discusses CNMs properties and applications in industrial and medical fields, adverse effects on human health, especially the induction of tumor initiation and metastasis through EMT and CSCs procedure.
Collapse
Affiliation(s)
- Xiaotong Yang
- Tianjin Medical University General Hospital, Tianjin, China
| | - Gongquan Xu
- Tianjin Medical University General Hospital, Tianjin, China
| | - Xiaolong Liu
- Tianjin Medical University General Hospital, Tianjin, China
| | - Guiming Zhou
- Tianjin Medical University General Hospital, Tianjin, China
| | - Bing Zhang
- Rushan Hospital of Traditional Chinese Medicine, Weihai, China
| | - Fan Wang
- Tianjin Medical University General Hospital, Tianjin, China
| | - Lingjuan Wang
- Institute of Reproductive Health, Tongji Medical College, Huazhong University of Science and Technology, Hubei, China
| | - Bin Li
- Tianjin Medical University General Hospital, Tianjin, China
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing, China
| | - Liming Li
- Tianjin Medical University General Hospital, Tianjin, China
| |
Collapse
|
5
|
Santos NE, Mendes JC, Braga SS. The Gemstone Cyborg: How Diamond Films Are Creating New Platforms for Cell Regeneration and Biointerfacing. Molecules 2023; 28:molecules28041626. [PMID: 36838614 PMCID: PMC9968187 DOI: 10.3390/molecules28041626] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/21/2022] [Revised: 01/26/2023] [Accepted: 01/31/2023] [Indexed: 02/11/2023] Open
Abstract
Diamond is a promising material for the biomedical field, mainly due to its set of characteristics such as biocompatibility, strength, and electrical conductivity. Diamond can be synthesised in the laboratory by different methods, is available in the form of plates or films deposited on foreign substrates, and its morphology varies from microcrystalline diamond to ultrananocrystalline diamond. In this review, we summarise some of the most relevant studies regarding the adhesion of cells onto diamond surfaces, the consequent cell growth, and, in some very interesting cases, the differentiation of cells into neurons and oligodendrocytes. We discuss how different morphologies can affect cell adhesion and how surface termination can influence the surface hydrophilicity and consequent attachment of adherent proteins. At the end of the review, we present a brief perspective on how the results from cell adhesion and biocompatibility can make way for the use of diamond as biointerface.
Collapse
Affiliation(s)
- Nádia E. Santos
- LAQV-REQUIMTE, Department of Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal
- Instituto de Telecomunicações and University of Aveiro, 3810-193 Aveiro, Portugal
| | - Joana C. Mendes
- Instituto de Telecomunicações and University of Aveiro, 3810-193 Aveiro, Portugal
- Correspondence: (J.C.M.); (S.S.B.)
| | - Susana Santos Braga
- LAQV-REQUIMTE, Department of Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal
- Correspondence: (J.C.M.); (S.S.B.)
| |
Collapse
|
6
|
Guo X, You Y, Bao A, Jia P, Xiong J, Li J. Recent Progress of Nanodiamond Film in Controllable Fabrication and Field Emission Properties. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:577. [PMID: 36770538 PMCID: PMC9920309 DOI: 10.3390/nano13030577] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/02/2022] [Revised: 01/25/2023] [Accepted: 01/27/2023] [Indexed: 06/18/2023]
Abstract
The interest in the field electron emission cathode nanomaterials is on the rise due to the wide applications, such as electron sources, miniature X-ray devices, display materials, etc. In particular, nanodiamond (ND) film is regarded as an ideal next-generation cathode emitter in the field emission devices, due to the low or negative electron affinity, small grain size, high mechanical hardness, low work function, and high reliability. Increasing efforts are conducted on the investigation of the emission structures, manufacturing cost, and field emission properties improvement of the ND films. This review aims to summarize the recent research, highlight the new findings, and provide a roadmap for future developments in the area of ND film electron field emitter. Specially, the optimizing methods of large-scale, high-quality, and cost-effective synthesis of ND films are discussed to achieve more stable surface structure and optimal physical properties. Additionally, the mainstream strategies applied to produce high field emission performance of ND films are analyzed in detail, including regulating the grain size/boundary, hybrid phase carbon content, and doping element/type of ND films; meanwhile, the problems existing in the related research and the outlook in this area are also discussed.
Collapse
Affiliation(s)
- Xin Guo
- National Key Laboratory for Electronic Measurement Technology, North University of China, 3 Xueyuan Road, Taiyuan 030051, China
| | - Yajun You
- National Key Laboratory for Electronic Measurement Technology, North University of China, 3 Xueyuan Road, Taiyuan 030051, China
| | - Aida Bao
- National Key Laboratory for Electronic Measurement Technology, North University of China, 3 Xueyuan Road, Taiyuan 030051, China
| | - Pinggang Jia
- National Key Laboratory for Electronic Measurement Technology, North University of China, 3 Xueyuan Road, Taiyuan 030051, China
| | - Jijun Xiong
- National Key Laboratory for Electronic Measurement Technology, North University of China, 3 Xueyuan Road, Taiyuan 030051, China
| | - Junshuai Li
- Key Laboratory of Special Function Materials and Structure Design of the Ministry of Education, Lanzhou University, 222 South Tianshui Road, Lanzhou 730000, China
| |
Collapse
|
7
|
Augustine R, Kalva SN, Dalvi YB, Varghese R, Chandran M, Hasan A. Air-jet spun tissue engineering scaffolds incorporated with diamond nanosheets with improved mechanical strength and biocompatibility. Colloids Surf B Biointerfaces 2023; 221:112958. [DOI: 10.1016/j.colsurfb.2022.112958] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/28/2022] [Revised: 10/06/2022] [Accepted: 10/19/2022] [Indexed: 11/06/2022]
|
8
|
Nikolova MP, Apostolova MD. Advances in Multifunctional Bioactive Coatings for Metallic Bone Implants. MATERIALS (BASEL, SWITZERLAND) 2022; 16:183. [PMID: 36614523 PMCID: PMC9821663 DOI: 10.3390/ma16010183] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/09/2022] [Revised: 12/19/2022] [Accepted: 12/21/2022] [Indexed: 06/17/2023]
Abstract
To fix the bone in orthopedics, it is almost always necessary to use implants. Metals provide the needed physical and mechanical properties for load-bearing applications. Although widely used as biomedical materials for the replacement of hard tissue, metallic implants still confront challenges, among which the foremost is their low biocompatibility. Some of them also suffer from excessive wear, low corrosion resistance, infections and shielding stress. To address these issues, various coatings have been applied to enhance their in vitro and in vivo performance. When merged with the beneficial properties of various bio-ceramic or polymer coatings remarkable bioactive, osteogenic, antibacterial, or biodegradable composite implants can be created. In this review, bioactive and high-performance coatings for metallic bone implants are systematically reviewed and their biocompatibility is discussed. Updates in coating materials and formulations for metallic implants, as well as their production routes, have been provided. The ways of improving the bioactive coating performance by incorporating bioactive moieties such as growth factors, osteogenic factors, immunomodulatory factors, antibiotics, or other drugs that are locally released in a controlled manner have also been addressed.
Collapse
Affiliation(s)
- Maria P. Nikolova
- Department of Material Science and Technology, University of Ruse “A. Kanchev”, 8 Studentska Str., 7017 Ruse, Bulgaria
| | - Margarita D. Apostolova
- Medical and Biological Research Lab., “Roumen Tsanev” Institute of Molecular Biology, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria
| |
Collapse
|
9
|
Terranova ML. Key Challenges in Diamond Coating of Titanium Implants: Current Status and Future Prospects. Biomedicines 2022; 10:biomedicines10123149. [PMID: 36551907 PMCID: PMC9775193 DOI: 10.3390/biomedicines10123149] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/12/2022] [Revised: 11/26/2022] [Accepted: 11/28/2022] [Indexed: 12/12/2022] Open
Abstract
Over past years, the fabrication of Ti-based permanent implants for fracture fixation, joint replacement and bone or tooth substitution, has become a routine task. However, it has been found that some degradation phenomena occurring on the Ti surface limits the life or the efficiency of the artificial constructs. The task of avoiding such adverse effects, to prevent microbial colonization and to accelerate osteointegration, is being faced by a variety of approaches in order to adapt Ti surfaces to the needs of osseous tissues. Among the large set of biocompatible materials proposed as an interface between Ti and the hosting tissue, diamond has been proven to offer bioactive and mechanical properties able to match the specific requirements of osteoblasts. Advances in material science and implant engineering are now enabling us to produce micro- or nano-crystalline diamond coatings on a variety of differently shaped Ti constructs. The aim of this paper is to provide an overview of the research currently ongoing in the field of diamond-coated orthopedic Ti implants and to examine the evolution of the concepts that are accelerating the full transition of such technology from the laboratory to clinical applications.
Collapse
Affiliation(s)
- Maria Letizia Terranova
- Dipartimento di Scienze e Tecnologie Chimiche, Università di Roma Tor Vergata, Via della Ricerca Scientifica, 00133 Roma, Italy; or
- Centro di Ricerca Interdipartimentale di Medicina Rigenerativa (CIMER), Università di Roma Tor Vergata, Via della Ricerca Scientifica, 00133 Roma, Italy
| |
Collapse
|
10
|
Mitruţ I, Scorei IR, Manolea HO, Biţă A, Mogoantă L, Neamţu J, Bejenaru LE, Ciocîlteu MV, Bejenaru C, Rău G, Mogoşanu GD. Boron-containing compounds in Dentistry: a narrative review. ROMANIAN JOURNAL OF MORPHOLOGY AND EMBRYOLOGY = REVUE ROUMAINE DE MORPHOLOGIE ET EMBRYOLOGIE 2022; 63:477-483. [PMID: 36588485 PMCID: PMC9926150 DOI: 10.47162/rjme.63.3.01] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Subscribe] [Scholar Register] [Indexed: 01/03/2023]
Abstract
Research on the use of boron (B) in the field of oral health has gained momentum in recent years, with various studies on the possibilities of using various B-containing compounds (BCCs). A multitude of applications have been discovered, from cariostatic activity to anti-inflammatory and antifungal activity, paving the way for other new research directions. B is a microelement that is commonly found in the human diet, and present throughout the body, with the highest concentration in the structure of bones, teeth, and gastrointestinal mucus gel layer. Multiple studies have demonstrated that B plays some important roles, especially in bone development and recently has been proposed to have an essential role in the healthy symbiosis. In addition, B has also attracted the interest of researchers, as various studies used BCCs in conventional or modern biomaterials. In this review, we have brought together the information we have found about B updates in the dental field and analyzing its future perspectives and potential for further studies.
Collapse
Affiliation(s)
- Ioana Mitruţ
- Department of Biochemistry, BioBoron Research Institute, S.C. Natural Research S.R.L., Podari, Dolj County, Romania;
| | - Ion Romulus Scorei
- Department of Biochemistry, BioBoron Research Institute, S.C. Natural Research S.R.L., Podari, Dolj County, Romania
| | - Horia Octavian Manolea
- Department of Dental Materials, Faculty of Dental Medicine, University of Medicine and Pharmacy of Craiova, Romania
| | - Andrei Biţă
- Department of Biochemistry, BioBoron Research Institute, S.C. Natural Research S.R.L., Podari, Dolj County, Romania , Department of Pharmacognosy & Phytotherapy, Faculty of Pharmacy, University of Medicine and Pharmacy of Craiova, Romania
| | - Laurenţiu Mogoantă
- Research Center for Microscopic Morphology and Immunology, University of Medicine and Pharmacy of Craiova, Romania
| | - Johny Neamţu
- Department of Biochemistry, BioBoron Research Institute, S.C. Natural Research S.R.L., Podari, Dolj County, Romania , Department of Physics, Faculty of Pharmacy, University of Medicine and Pharmacy of Craiova, Romania
| | - Ludovic Everard Bejenaru
- Department of Pharmacognosy & Phytotherapy, Faculty of Pharmacy, University of Medicine and Pharmacy of Craiova, Romania
| | - Maria Viorica Ciocîlteu
- Department of Biochemistry, BioBoron Research Institute, S.C. Natural Research S.R.L., Podari, Dolj County, Romania , Department of Analytical Chemistry, Faculty of Pharmacy, University of Medicine and Pharmacy of Craiova, Romania
| | - Cornelia Bejenaru
- Department of Pharmaceutical Botany, Faculty of Pharmacy, University of Medicine and Pharmacy of Craiova, Romania
| | - Gabriela Rău
- Department of Biochemistry, BioBoron Research Institute, S.C. Natural Research S.R.L., Podari, Dolj County, Romania , Department of Organic Chemistry, Faculty of Pharmacy, University of Medicine and Pharmacy of Craiova, Romania
| | - George Dan Mogoşanu
- Department of Biochemistry, BioBoron Research Institute, S.C. Natural Research S.R.L., Podari, Dolj County, Romania , Department of Pharmacognosy & Phytotherapy, Faculty of Pharmacy, University of Medicine and Pharmacy of Craiova, Romania
| |
Collapse
|
11
|
Seaton BT, Heien ML. Biocompatible reference electrodes to enhance chronic electrochemical signal fidelity in vivo. Anal Bioanal Chem 2021; 413:6689-6701. [PMID: 34595560 DOI: 10.1007/s00216-021-03640-w] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2021] [Revised: 08/27/2021] [Accepted: 08/30/2021] [Indexed: 12/17/2022]
Abstract
In vivo electrochemistry is a vital tool of neuroscience that allows for the detection, identification, and quantification of neurotransmitters, their metabolites, and other important analytes. One important goal of in vivo electrochemistry is a better understanding of progressive neurological disorders (e.g., Parkinson's disease). A complete understanding of such disorders can only be achieved through a combination of acute (i.e., minutes to hours) and chronic (i.e., days or longer) experimentation. Chronic studies are more challenging because they require prolonged implantation of electrodes, which elicits an immune response, leading to glial encapsulation of the electrodes and altered electrode performance (i.e., biofouling). Biofouling leads to increased electrode impedance and reference electrode polarization, both of which diminish the selectivity and sensitivity of in vivo electrochemical measurements. The increased impedance factor has been successfully mitigated previously with the use of a counter electrode, but the challenge of reference electrode polarization remains. The commonly used Ag/AgCl reference electrode lacks the long-term potential stability in vivo required for chronic measurements. In addition, the cytotoxicity of Ag/AgCl adversely affects animal experimentation and prohibits implantation in humans, hindering translational research progress. Thus, a move toward biocompatible reference electrodes with superior chronic potential stability is necessary. Two qualifying materials, iridium oxide and boron-doped diamond, are introduced and discussed in terms of their electrochemical properties, biocompatibilities, fabrication methods, and applications. In vivo electrochemistry continues to advance toward more chronic experimentation in both animal models and humans, necessitating the utilization of biocompatible reference electrodes that should provide superior potential stability and allow for unprecedented chronic signal fidelity when used with a counter electrode for impedance mitigation.
Collapse
Affiliation(s)
- Blake T Seaton
- Department of Chemistry and Biochemistry, University of Arizona, Tucson, AZ, 85721, USA
| | - Michael L Heien
- Department of Chemistry and Biochemistry, University of Arizona, Tucson, AZ, 85721, USA.
| |
Collapse
|
12
|
Lopez de Armentia S, del Real JC, Paz E, Dunne N. Advances in Biodegradable 3D Printed Scaffolds with Carbon-Based Nanomaterials for Bone Regeneration. MATERIALS 2020; 13:ma13225083. [PMID: 33187218 PMCID: PMC7697295 DOI: 10.3390/ma13225083] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/15/2020] [Revised: 11/05/2020] [Accepted: 11/09/2020] [Indexed: 01/09/2023]
Abstract
Bone possesses an inherent capacity to fix itself. However, when a defect larger than a critical size appears, external solutions must be applied. Traditionally, an autograft has been the most used solution in these situations. However, it presents some issues such as donor-site morbidity. In this context, porous biodegradable scaffolds have emerged as an interesting solution. They act as external support for cell growth and degrade when the defect is repaired. For an adequate performance, these scaffolds must meet specific requirements: biocompatibility, interconnected porosity, mechanical properties and biodegradability. To obtain the required porosity, many methods have conventionally been used (e.g., electrospinning, freeze-drying and salt-leaching). However, from the development of additive manufacturing methods a promising solution for this application has been proposed since such methods allow the complete customisation and control of scaffold geometry and porosity. Furthermore, carbon-based nanomaterials present the potential to impart osteoconductivity and antimicrobial properties and reinforce the matrix from a mechanical perspective. These properties make them ideal for use as nanomaterials to improve the properties and performance of scaffolds for bone tissue engineering. This work explores the potential research opportunities and challenges of 3D printed biodegradable composite-based scaffolds containing carbon-based nanomaterials for bone tissue engineering applications.
Collapse
Affiliation(s)
- Sara Lopez de Armentia
- Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Alberto Aguilera 25, 28015 Madrid, Spain; (S.L.d.A.); (J.C.d.R.)
| | - Juan Carlos del Real
- Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Alberto Aguilera 25, 28015 Madrid, Spain; (S.L.d.A.); (J.C.d.R.)
| | - Eva Paz
- Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Alberto Aguilera 25, 28015 Madrid, Spain; (S.L.d.A.); (J.C.d.R.)
- Correspondence: (E.P.); (N.D.)
| | - Nicholas Dunne
- Centre for Medical Engineering Research, School of Mechanical and Manufacturing Engineering, Dublin City University, Stokes Building, Collins Avenue, Dublin 9, Ireland
- School of Mechanical and Manufacturing Engineering, Dublin City University, Dublin 9, Ireland
- School of Pharmacy, Queen’s University of Belfast, 97 Lisburn Road, Belfast BT9 7BL, UK
- Department of Mechanical and Manufacturing Engineering, School of Engineering, Trinity College Dublin, Dublin 2, Ireland
- Advanced Manufacturing Research Centre (I-Form), School of Mechanical and Manufacturing Engineering, Dublin City University, Glasnevin, Dublin 9, Ireland
- Advanced Materials and Bioengineering Research Centre (AMBER), Trinity College Dublin, Dublin 2, Ireland
- Advanced Processing Technology Research Centre, Dublin City University, Dublin 9, Ireland
- Trinity Centre for Biomedical Engineering, Trinity Biomedical Sciences Institute, Trinity College Dublin, Dublin 2, Ireland
- Correspondence: (E.P.); (N.D.)
| |
Collapse
|
13
|
Applications of Nanocellulose/Nanocarbon Composites: Focus on Biotechnology and Medicine. NANOMATERIALS 2020; 10:nano10020196. [PMID: 31979245 PMCID: PMC7074939 DOI: 10.3390/nano10020196] [Citation(s) in RCA: 56] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/27/2019] [Revised: 01/20/2020] [Accepted: 01/21/2020] [Indexed: 02/07/2023]
Abstract
Nanocellulose/nanocarbon composites are newly emerging smart hybrid materials containing cellulose nanoparticles, such as nanofibrils and nanocrystals, and carbon nanoparticles, such as "classical" carbon allotropes (fullerenes, graphene, nanotubes and nanodiamonds), or other carbon nanostructures (carbon nanofibers, carbon quantum dots, activated carbon and carbon black). The nanocellulose component acts as a dispersing agent and homogeneously distributes the carbon nanoparticles in an aqueous environment. Nanocellulose/nanocarbon composites can be prepared with many advantageous properties, such as high mechanical strength, flexibility, stretchability, tunable thermal and electrical conductivity, tunable optical transparency, photodynamic and photothermal activity, nanoporous character and high adsorption capacity. They are therefore promising for a wide range of industrial applications, such as energy generation, storage and conversion, water purification, food packaging, construction of fire retardants and shape memory devices. They also hold great promise for biomedical applications, such as radical scavenging, photodynamic and photothermal therapy of tumors and microbial infections, drug delivery, biosensorics, isolation of various biomolecules, electrical stimulation of damaged tissues (e.g., cardiac, neural), neural and bone tissue engineering, engineering of blood vessels and advanced wound dressing, e.g., with antimicrobial and antitumor activity. However, the potential cytotoxicity and immunogenicity of the composites and their components must also be taken into account.
Collapse
|
14
|
Lišková J, Slepičková Kasálková N, Slepička P, Švorčík V, Bačáková L. Heat-treated carbon coatings on poly (l-lactide) foils for tissue engineering. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2019; 100:117-128. [PMID: 30948046 DOI: 10.1016/j.msec.2019.02.105] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/31/2018] [Revised: 02/26/2019] [Accepted: 02/27/2019] [Indexed: 10/27/2022]
Abstract
Carbon-based materials have emerged as promising candidates for a wide variety of biomedical applications, including tissue engineering. We have developed a simple but unique technique for patterning carbon-based substrates in order to control cell adhesion, growth and phenotypic maturation. Carbon films were deposited on PLLA foils from distances of 3 to 7 cm. Subsequent heat-treatment (60 °C, 1 h) created lamellar structures with dimensions decreasing from micro- to nanoscale with increasing deposition distance. All carbon films improved the spreading and proliferation of human osteoblast-like MG 63 cells, and promoted the alignment of these cells along the lamellar structures. Similar alignment was observed in human osteoblast-like Saos-2 cells and in human dermal fibroblasts. Type I collagen fibers produced by Saos-2 cells and fibroblasts were also oriented along the lamellar structures. These structures increased the activity of alkaline phosphatase in Saos-2 cells. Carbon coatings also supported adhesion and growth of vascular endothelial and smooth muscle cells, particularly flatter non-heated carbon films. On these films, the continuity of the endothelial cell layer was better than on heat-treated lamellar surfaces. Heat-treated carbon-coated PLLA is therefore more suitable for bone and skin tissue engineering, while carbon-coated PLLA without heating is more appropriate for vascular tissue engineering.
Collapse
Affiliation(s)
- Jana Lišková
- Department of Biomaterials and Tissue Engineering, Institute of Physiology of the Czech Academy of Sciences, Vídeňská 1083, 14220 Prague, Czech Republic
| | - Nikola Slepičková Kasálková
- Department of Solid State Engineering, University of Chemistry and Technology, Technická 5, 16628 Prague, Czech Republic
| | - Petr Slepička
- Department of Solid State Engineering, University of Chemistry and Technology, Technická 5, 16628 Prague, Czech Republic.
| | - Václav Švorčík
- Department of Solid State Engineering, University of Chemistry and Technology, Technická 5, 16628 Prague, Czech Republic
| | - Lucie Bačáková
- Department of Biomaterials and Tissue Engineering, Institute of Physiology of the Czech Academy of Sciences, Vídeňská 1083, 14220 Prague, Czech Republic
| |
Collapse
|
15
|
Sokolova V, Rojas-Sánchez L, Białas N, Schulze N, Epple M. Calcium phosphate nanoparticle-mediated transfection in 2D and 3D mono- and co-culture cell models. Acta Biomater 2019; 84:391-401. [PMID: 30503560 DOI: 10.1016/j.actbio.2018.11.051] [Citation(s) in RCA: 16] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/18/2018] [Revised: 11/25/2018] [Accepted: 11/28/2018] [Indexed: 12/28/2022]
Abstract
The transfer of nucleic acids into living cells, i.e. transfection, is a major technique in current molecular biology and medicine. As nucleic acids alone are not able to penetrate the cell membrane, an efficient carrier is needed. Calcium phosphate nanoparticles can serve as carrier due to their biocompatibility, biodegradability and high affinity to nucleic acids like DNA or RNA. Their application was extended here from two-dimensional (2D) to three-dimensional (3D) cell culture models, including co-cultures. Compared to 2D monolayer cell cultures, a 3D culture system represents a more realistic spatial, biochemical and cellular environment. The uptake of fluorescent calcium phosphate nanoparticles (diameter 40-70 nm; cationic) was studied in 2D and 3D cell culture models by confocal laser scanning microscopy. The transfection of eGFP by calcium phosphate nanoparticles was compared in 2D and 3D cell culture, including co-cultures of green fluorescing HeLa-eGFP cells and MG-63 cells in 2D and in 3D models with the red fluorescent protein mCherry. This permitted a cell-specific assessment of the local transfection efficiency. In general, the penetration of nanoparticles into the spheroids was significantly higher than that of a model oligonucleotide carried by Lipofectamine. The transfection efficiency was comparable in 3D cell cultures with 2D cell cultures, but it occurred preferentially at the surface of the spheroids, following the uptake pathway of the nanoparticles. STATEMENT OF SIGNIFICANCE: Three-dimensional cell culture models can serve as a bridge between the in-vitro cell cultures and the in-vivo situation, especially when mass transfer effects have to be considered. This is the case for nanoparticles where the incubation effect in a two-dimensional cell culture strongly differs from a three-dimensional cell culture or a living tissue. We have compared the uptake of nanoparticles and a subsequent transfection of fluorescent proteins in two-dimensional and three-dimensional cell culture models. An elegant model to investigate the transfection in co-cultures was developed using HeLa-eGFP cells (green fluorescent) together with MG-63 cells (non-fluorescent) that were transfected with the red-fluorescing protein mCherry. Thereby, the transfection of both cell types in the co-culture was easily distinguished.
Collapse
|
16
|
Uz M, Das SR, Ding S, Sakaguchi DS, Claussen JC, Mallapragada SK. Advances in Controlling Differentiation of Adult Stem Cells for Peripheral Nerve Regeneration. Adv Healthc Mater 2018; 7:e1701046. [PMID: 29656561 DOI: 10.1002/adhm.201701046] [Citation(s) in RCA: 27] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/02/2017] [Revised: 01/08/2018] [Indexed: 01/01/2023]
Abstract
Adult stems cells, possessing the ability to grow, migrate, proliferate, and transdifferentiate into various specific phenotypes, constitute a great asset for peripheral nerve regeneration. Adult stem cells' ability to undergo transdifferentiation is sensitive to various cell-to-cell interactions and external stimuli involving interactions with physical, mechanical, and chemical cues within their microenvironment. Various studies have employed different techniques for transdifferentiating adult stem cells from distinct sources into specific lineages (e.g., glial cells and neurons). These techniques include chemical and/or electrical induction as well as cell-to-cell interactions via co-culture along with the use of various 3D conduit/scaffold designs. Such scaffolds consist of unique materials that possess controllable physical/mechanical properties mimicking cells' natural extracellular matrix. However, current limitations regarding non-scalable transdifferentiation protocols, fate commitment of transdifferentiated stem cells, and conduit/scaffold design have required new strategies for effective stem cells transdifferentiation and implantation. In this progress report, a comprehensive review of recent advances in the transdifferentiation of adult stem cells via different approaches along with multifunctional conduit/scaffolds designs is presented for peripheral nerve regeneration. Potential cellular mechanisms and signaling pathways associated with differentiation are also included. The discussion with current challenges in the field and an outlook toward future research directions is concluded.
Collapse
Affiliation(s)
- Metin Uz
- Department of Chemical and Biological Engineering Iowa State University Ames IA 50011 USA
| | - Suprem R. Das
- Department of Mechanical Engineering Iowa State University Ames IA 50011 USA
- Division of Materials Science and Engineering Ames Laboratory Ames IA 50011 USA
| | - Shaowei Ding
- Department of Mechanical Engineering Iowa State University Ames IA 50011 USA
| | - Donald S. Sakaguchi
- Neuroscience Program Iowa State University Ames IA 50011 USA
- Department of Genetics Development and Cell Biology Iowa State University Ames IA 50011 USA
| | - Jonathan C. Claussen
- Department of Mechanical Engineering Iowa State University Ames IA 50011 USA
- Division of Materials Science and Engineering Ames Laboratory Ames IA 50011 USA
| | - Surya K. Mallapragada
- Department of Chemical and Biological Engineering Iowa State University Ames IA 50011 USA
- Department of Genetics Development and Cell Biology Iowa State University Ames IA 50011 USA
| |
Collapse
|
17
|
A Biomimetic Alternative to Synthetic Hydroxyapatite: "Boron-Containing Bone-Like Hydroxyapatite" Precipitated From Simulated Body Fluid. Ann Plast Surg 2018; 79:304-311. [PMID: 28430676 DOI: 10.1097/sap.0000000000001072] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
Abstract
BACKGROUND Biological hydroxyapatite (HA), has several mechanical and physical advantages over the commercially available synthetic apatite (CAP-HA). The aim of this in vivo study was to investigate the effect of osteoinductive "bone-like hydroxyapatite" obtained from simulated body fluid (SBF) combined with osteoinductive "boron" (B) on bone healing. MATERIALS Bone like nanohydroxyapatite (SBF-HA) was precipitated from 10× simulated body fluid (10×SBF). Thirty Sprague-Dawley rats were randomly divided into 5 experimental groups (n = 6 each). The groups were involving blank defect, chitosan, SBF-HA, SBF-HA/B, and CAP-HA. Two biparietal round critical sized bone defect was created using a dental burr. The rats were sacrificed respectively at the end of second and fourth months after surgery and their calvarium were harvested for further macroscopic, microtomographic, and histologic evaluation. RESULTS The SBF-HA/B group demonstrated the highest mineralized matrix formation rates (30.69 ± 3.73 for the second month, 62.68 ± 7.03 for the fourth month) and was significantly higher than SBF-HA and the CAP-HA groups. The SBF-HA/B group demonstrated the highest mineralized matrix formation rates (30.69 ± 3.73 for the second month, 62.68 ± 7.03 for the fourth month) and was significantly higher than SBF-HA and the CAP-HA groups. In means of bone defect repair histologically, the highest result was observed in the SBF-HA/B group (P < 0.001). CONCLUSIONS The "bone-like hydroxapatite" obtained from simulated body fluid is worth attention when both its beneficial effects on bone healing and its biological behavior is taken in consideration for further bone tissue engineering studies. It appears to be a potential alternative to the commercially available hydroxyapatite samples.
Collapse
|
18
|
Jelínek M, Buixaderas E, Drahokoupil J, Kocourek T, Remsa J, Vaněk P, Vandrovcová M, Doubková M, Bačáková L. Laser-synthesized nanocrystalline, ferroelectric, bioactive BaTiO 3/Pt/FS for bone implants. J Biomater Appl 2018; 32:1464-1475. [PMID: 29621929 DOI: 10.1177/0885328218768646] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
The goal of our study is to design BaTiO3 ferroelectric layers that will cover metal implants and provide improved osseointegration. We synthesized ferroelectric BaTiO3 layers on Pt/fused silica substrates, and we studied their physical and bio-properties. BaTiO3 and Pt layers were prepared using KrF excimer laser ablation at substrate temperature Ts in the range from 200°C to 750°C in vacuum or under oxygen pressure of 10 Pa, 15 Pa, and 20 Pa. The BaTiO3/Pt and Pt layers adhered well to the substrates. BaTiO3 films of crystallite size 60-140 nm were fabricated. Ferroelectric loops were measured and ferroelectricity was also confirmed using Raman scattering measurements. Results of atomic force microscopy topology and the X-ray diffraction structure of the BaTiO3/Pt/fused silica multilayers are presented. The adhesion, viability, growth, and osteogenic differentiation of human osteoblast-like Saos-2 cells were also studied. On days 1, 3, and 7 after seeding, the lowest cell numbers were found on non-ferroelectric BaTiO3, while the values on ferroelectric BaTiO3, on non-annealed and annealed Pt interlayers, and on the control tissue culture polystyrene dishes and microscopic glass slides were similar, and were usually significantly higher than on non-ferroelectric BaTiO3. A similar trend was observed for the intensity of the fluorescence of alkaline phosphatase, a medium-term marker of osteogenic differentiation, and of osteocalcin, a late marker of osteogenic differentiation. At the same time, the cell viability, tested on day 1 after seeding, was very high on all tested samples, reaching 93-99%. Ferroelectric BaTiO3 films deposited on metallic bone implants through a Pt interlayer can therefore markedly improve the osseointegration of these implants in comparison with non-ferroelectric BaTiO3 films.
Collapse
Affiliation(s)
- Miroslav Jelínek
- 1 Institute of Physics of the Czech Academy of Sciences, Prague 8, Czech Republic.,2 Czech Technical University in Prague, Faculty of Biomedical Engineering, Kladno, Czech Republic
| | - Elena Buixaderas
- 1 Institute of Physics of the Czech Academy of Sciences, Prague 8, Czech Republic
| | - Jan Drahokoupil
- 1 Institute of Physics of the Czech Academy of Sciences, Prague 8, Czech Republic
| | - Tomáš Kocourek
- 1 Institute of Physics of the Czech Academy of Sciences, Prague 8, Czech Republic.,2 Czech Technical University in Prague, Faculty of Biomedical Engineering, Kladno, Czech Republic
| | - Jan Remsa
- 1 Institute of Physics of the Czech Academy of Sciences, Prague 8, Czech Republic.,2 Czech Technical University in Prague, Faculty of Biomedical Engineering, Kladno, Czech Republic
| | - Přemysl Vaněk
- 1 Institute of Physics of the Czech Academy of Sciences, Prague 8, Czech Republic
| | - Marta Vandrovcová
- 3 Institute of Physiology of the Czech Academy of Sciences, Prague 4, Czech Republic
| | - Martina Doubková
- 3 Institute of Physiology of the Czech Academy of Sciences, Prague 4, Czech Republic
| | - Lucie Bačáková
- 3 Institute of Physiology of the Czech Academy of Sciences, Prague 4, Czech Republic
| |
Collapse
|
19
|
Whitlow J, Pacelli S, Paul A. Multifunctional nanodiamonds in regenerative medicine: Recent advances and future directions. J Control Release 2017; 261:62-86. [PMID: 28596105 PMCID: PMC5560434 DOI: 10.1016/j.jconrel.2017.05.033] [Citation(s) in RCA: 71] [Impact Index Per Article: 10.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/26/2017] [Revised: 05/26/2017] [Accepted: 05/28/2017] [Indexed: 12/26/2022]
Abstract
With recent advances in the field of nanomedicine, many new strategies have emerged for diagnosing and treating diseases. At the forefront of this multidisciplinary research, carbon nanomaterials have demonstrated unprecedented potential for a variety of regenerative medicine applications including novel drug delivery platforms that facilitate the localized and sustained release of therapeutics. Nanodiamonds (NDs) are a unique class of carbon nanoparticles that are gaining increasing attention for their biocompatibility, highly functional surfaces, optical properties, and robust physical properties. Their remarkable features have established NDs as an invaluable regenerative medicine platform, with a broad range of clinically relevant applications ranging from targeted delivery systems for insoluble drugs, bioactive substrates for stem cells, and fluorescent probes for long-term tracking of cells and biomolecules in vitro and in vivo. This review introduces the synthesis techniques and the various routes of surface functionalization that allow for precise control over the properties of NDs. It also provides an in-depth overview of the current progress made toward the use of NDs in the fields of drug delivery, tissue engineering, and bioimaging. Their future outlook in regenerative medicine including the current clinical significance of NDs, as well as the challenges that must be overcome to successfully translate the reviewed technologies from research platforms to clinical therapies will also be discussed.
Collapse
Affiliation(s)
- Jonathan Whitlow
- BioIntel Research Laboratory, Department of Chemical and Petroleum Engineering, School of Engineering, University of Kansas, Lawrence, KS 66045, USA
| | - Settimio Pacelli
- BioIntel Research Laboratory, Department of Chemical and Petroleum Engineering, School of Engineering, University of Kansas, Lawrence, KS 66045, USA
| | - Arghya Paul
- BioIntel Research Laboratory, Department of Chemical and Petroleum Engineering, School of Engineering, University of Kansas, Lawrence, KS 66045, USA; Bioengineering Graduate Program, University of Kansas, Lawrence, KS, USA.
| |
Collapse
|
20
|
Nistor PA, May PW. Diamond thin films: giving biomedical applications a new shine. J R Soc Interface 2017; 14:20170382. [PMID: 28931637 PMCID: PMC5636274 DOI: 10.1098/rsif.2017.0382] [Citation(s) in RCA: 31] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/23/2017] [Accepted: 08/29/2017] [Indexed: 01/10/2023] Open
Abstract
Progress made in the last two decades in chemical vapour deposition technology has enabled the production of inexpensive, high-quality coatings made from diamond to become a scientific and commercial reality. Two properties of diamond make it a highly desirable candidate material for biomedical applications: first, it is bioinert, meaning that there is minimal immune response when diamond is implanted into the body, and second, its electrical conductivity can be altered in a controlled manner, from insulating to near-metallic. In vitro, diamond can be used as a substrate upon which a range of biological cells can be cultured. In vivo, diamond thin films have been proposed as coatings for implants and prostheses. Here, we review a large body of data regarding the use of diamond substrates for in vitro cell culture. We also detail more recent work exploring diamond-coated implants with the main targets being bone and neural tissue. We conclude that diamond emerges as one of the major new biomaterials of the twenty-first century that could shape the way medical treatment will be performed, especially when invasive procedures are required.
Collapse
Affiliation(s)
- P A Nistor
- Regenerative Medicine Laboratory, University of Bristol, Bristol BS8 1TD, UK
| | - P W May
- School of Chemistry, University of Bristol, Bristol BS8 1TS, UK
| |
Collapse
|
21
|
Gelatin-based 3D conduits for transdifferentiation of mesenchymal stem cells into Schwann cell-like phenotypes. Acta Biomater 2017; 53:293-306. [PMID: 28213098 DOI: 10.1016/j.actbio.2017.02.018] [Citation(s) in RCA: 31] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/14/2016] [Revised: 02/08/2017] [Accepted: 02/11/2017] [Indexed: 01/02/2023]
Abstract
In this study, gelatin-based 3D conduits with three different microstructures (nanofibrous, macroporous and ladder-like) were fabricated for the first time via combined molding and thermally induced phase separation (TIPS) technique for peripheral nerve regeneration. The effects of conduit microstructure and mechanical properties on the transdifferentiation of bone marrow-derived mesenchymal stem cells (MSCs) into Schwann cell (SC) like phenotypes were examined to help facilitate neuroregeneration and understand material-cell interfaces. Results indicated that 3D macroporous and ladder-like structures enhanced MSC attachment, proliferation and spreading, creating interconnected cellular networks with large numbers of viable cells compared to nanofibrous and 2D-tissue culture plate counterparts. 3D-ladder-like conduit structure with complex modulus of ∼0.4×106Pa and pore size of ∼150μm provided the most favorable microenvironment for MSC transdifferentiation leading to ∼85% immunolabeling of all SC markers. On the other hand, the macroporous conduits with complex modulus of ∼4×106Pa and pore size of ∼100μm showed slightly lower (∼65% for p75, ∼75% for S100 and ∼85% for S100β markers) immunolabeling. Transdifferentiated MSCs within 3D-ladder-like conduits secreted significant amounts (∼2.5pg/mL NGF and ∼0.7pg/mL GDNF per cell) of neurotrophic factors, while MSCs in macroporous conduits released slightly lower (∼1.5pg/mL NGF and 0.7pg/mL GDNF per cell) levels. PC12 cells displayed enhanced neurite outgrowth in media conditioned by conduits with transdifferentiated MSCs. Overall, conduits with macroporous and ladder-like 3D structures are promising platforms in transdifferentiation of MSCs for neuroregeneration and should be further tested in vivo. STATEMENT OF SIGNIFICANCE This manuscript focuses on the effect of microstructure and mechanical properties of gelatin-based 3D conduits on the transdifferentiation of mesenchymal stem cells to Schwann cell-like phenotypes. This work builds on our recently accepted manuscript in Acta Biomaterialia focused on multifunctional 2D films, and focuses on 3D microstructured conduits designed to overcome limitations of current strategies to facilitate peripheral nerve regeneration. The comparison between conduits fabricated with nanofibrous, macroporous and ladder-like microstructures showed that the ladder-like conduits showed the most favorable environment for MSC transdifferentiation to Schwann-cell like phenotypes, as seen by both immunolabeling as well as secretion of neurotrophic factors. This work demonstrates the importance of controlling the 3D microstructure to facilitate tissue engineering strategies involving stem cells that can serve as promising approaches for peripheral nerve regeneration.
Collapse
|
22
|
Tunçay EÖ, Demirtaş TT, Gümüşderelioğlu M. Microwave-induced production of boron-doped HAp (B-HAp) and B-HAp coated composite scaffolds. J Trace Elem Med Biol 2017; 40:72-81. [PMID: 28159225 DOI: 10.1016/j.jtemb.2016.12.005] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 08/07/2016] [Revised: 12/13/2016] [Accepted: 12/13/2016] [Indexed: 11/30/2022]
Abstract
The aim of the present study is to produce boron (B) doped hydroxyapatite (B-HAp), which has an osteoinductive property, and investigate in-vitro osteogenesis potential of B-HAp coated chitosan (B-HAp/Ch) scaffolds. At first, B-HAp was produced by the interaction of ions within the concentrated synthetic body fluid containing boron (B-SBF) with microwave energy. Boron incorporation into HAp structure was performed by the substitution of borate ions with phosphate and hydroxyl ions. Experiments were carried out with different microwave powers and exposure times, and optimum conditions for the production of B-HAp were determined. B-HAp precipitated from B-SBF by 600W microwave power has 1.15±0.11% (w/w) B, 1.40 (w/w) Ca/P ratio, 4.30±0.07% (w/w) carbonate content, 30±4nm rod-like morphology and bone-like amorphous structure. Then, chitosan scaffolds that were prepared by freeze-drying were coated with B-HAp by performing microwave-assisted precipitation in the presence of scaffolds to improve their bioactivities and mechanical properties. The formation of apatite layer and the penetration of apatites into the pores were observed by scanning electron microscopy (SEM). Fourier Transform Infrared spectroscopy (ATR-FTIR) and X-ray diffraction (XRD) analysis also confirmed the presence of B-HAp layer. As control, hydroxyapatite coated chitosan scaffolds (HAp/Ch) produced at the same conditions were used. The results of cell culture studies indicated that B releasing from scaffolds enhances proliferation and osteoblastic differentiation of MC3T3-E1 cells. This work emphasized the importance of the use of B within the scaffolds for enhancing in-vitro bone tissue engineering applications.
Collapse
Affiliation(s)
- Ekin Ö Tunçay
- Hacettepe University, Department of Bioengineering, Ankara, Turkey
| | - T Tolga Demirtaş
- Hacettepe University, Department of Bioengineering, Ankara, Turkey
| | - Menemşe Gümüşderelioğlu
- Hacettepe University, Department of Bioengineering, Ankara, Turkey; Hacettepe University, Department of Chemical Engineering, Ankara, Turkey.
| |
Collapse
|
23
|
Alcaide M, Papaioannou S, Taylor A, Fekete L, Gurevich L, Zachar V, Pennisi CP. Resistance to protein adsorption and adhesion of fibroblasts on nanocrystalline diamond films: the role of topography and boron doping. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2016; 27:90. [PMID: 26975747 DOI: 10.1007/s10856-016-5696-3] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/05/2015] [Accepted: 02/29/2016] [Indexed: 06/05/2023]
Abstract
Boron-doped nanocrystalline diamond (BNCD) films exhibit outstanding electrochemical properties that make them very attractive for the fabrication of electrodes for novel neural interfaces and prosthetics. In these devices, the physicochemical properties of the electrode materials are critical to ensure an efficient long-term performance. The aim of this study was to investigate the relative contribution of topography and doping to the biological performance of BNCD films. For this purpose, undoped and boron-doped NCD films were deposited on low roughness (LR) and high roughness (HR) substrates, which were studied in vitro by means of protein adsorption and fibroblast growth assays. Our results show that BNCD films significantly reduce the adsorption of serum proteins, mostly on the LR substrates. As compared to fibroblasts cultured on LR BNCD films, cells grown on the HR BNCD films showed significantly reduced adhesion and lower growth rates. The mean length of fibronectin fibrils deposited by the cells was significantly increased in the BNCD coated substrates, mainly in the LR surfaces. Overall, the largest influence on protein adsorption, cell adhesion, proliferation, and fibronectin deposition was due to the underlying sub-micron topography, with little or no influence of boron doping. In perspective, BNCD films displaying surface roughness in the submicron range may be used as a strategy to reduce the fibroblast growth on the surface of neural electrodes.
Collapse
Affiliation(s)
- María Alcaide
- Laboratory for Stem Cell Research, Department of Health Science and Technology, Aalborg University, Fredrik Bajers Vej 3B, 9220, Aalborg, Denmark
| | - Stavros Papaioannou
- Laboratory for Stem Cell Research, Department of Health Science and Technology, Aalborg University, Fredrik Bajers Vej 3B, 9220, Aalborg, Denmark
| | - Andrew Taylor
- Institute of Physics, ASCR v.v.i., Prague, Czech Republic
- Nano6 s.r.o., Kladno, Czech Republic
| | | | - Leonid Gurevich
- Department of Physics and Nanotechnology, Aalborg University, Aalborg ∅, Denmark
| | - Vladimir Zachar
- Laboratory for Stem Cell Research, Department of Health Science and Technology, Aalborg University, Fredrik Bajers Vej 3B, 9220, Aalborg, Denmark
| | - Cristian Pablo Pennisi
- Laboratory for Stem Cell Research, Department of Health Science and Technology, Aalborg University, Fredrik Bajers Vej 3B, 9220, Aalborg, Denmark.
| |
Collapse
|
24
|
Alcaide M, Taylor A, Fjorback M, Zachar V, Pennisi CP. Boron-Doped Nanocrystalline Diamond Electrodes for Neural Interfaces: In vivo Biocompatibility Evaluation. Front Neurosci 2016; 10:87. [PMID: 27013949 PMCID: PMC4781860 DOI: 10.3389/fnins.2016.00087] [Citation(s) in RCA: 34] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/04/2015] [Accepted: 02/22/2016] [Indexed: 11/13/2022] Open
Abstract
Boron-doped nanocrystalline diamond (BDD) electrodes have recently attracted attention as materials for neural electrodes due to their superior physical and electrochemical properties, however their biocompatibility remains largely unexplored. In this work, we aim to investigate the in vivo biocompatibility of BDD electrodes in relation to conventional titanium nitride (TiN) electrodes using a rat subcutaneous implantation model. High quality BDD films were synthesized on electrodes intended for use as an implantable neurostimulation device. After implantation for 2 and 4 weeks, tissue sections adjacent to the electrodes were obtained for histological analysis. Both types of implants were contained in a thin fibrous encapsulation layer, the thickness of which decreased with time. Although the level of neovascularization around the implants was similar, BDD electrodes elicited significantly thinner fibrous capsules and a milder inflammatory reaction at both time points. These results suggest that BDD films may constitute an appropriate material to support stable performance of implantable neural electrodes over time.
Collapse
Affiliation(s)
- María Alcaide
- Laboratory for Stem Cell Research, Department of Health Science and Technology, Aalborg University Aalborg, Denmark
| | - Andrew Taylor
- Institute of Physics, Academy of Sciences of the Czech Republic v.v.iPrague, Czech Republic; Nano6 s.r.o.Kladno, Czech Republic
| | | | - Vladimir Zachar
- Laboratory for Stem Cell Research, Department of Health Science and Technology, Aalborg University Aalborg, Denmark
| | - Cristian P Pennisi
- Laboratory for Stem Cell Research, Department of Health Science and Technology, Aalborg University Aalborg, Denmark
| |
Collapse
|
25
|
Stochastic model explains formation of cell arrays on H/O-diamond patterns. Biointerphases 2015; 10:041006. [PMID: 26559048 DOI: 10.1116/1.4934794] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
Abstract
Cell migration plays an important role in many biological systems. A relatively simple stochastic model is developed and used to describe cell behavior on chemically patterned substrates. The model is based on three parameters: the speed of cell movement (own and external), the probability of cell adhesion, and the probability of cell division on the substrate. The model is calibrated and validated by experimental data obtained on hydrogen- and oxygen-terminated patterns on diamond. Thereby, the simulations reveal that: (1) the difference in the cell movement speed on these surfaces (about 1.5×) is the key factor behind the formation of cell arrays on the patterns, (2) this difference is provided by the presence of fetal bovine serum (validated by experiments), and (3) the directional cell flow promotes the array formation. The model also predicts that the array formation requires mean distance of cell travel at least 10% of intended stripe width. The model is generally applicable for biosensors using diverse cells, materials, and structures.
Collapse
|
26
|
Park S, Kang YJ, Majd S. A Review of Patterned Organic Bioelectronic Materials and their Biomedical Applications. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2015; 27:7583-7619. [PMID: 26397962 DOI: 10.1002/adma.201501809] [Citation(s) in RCA: 33] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/16/2015] [Revised: 05/17/2015] [Indexed: 06/05/2023]
Abstract
Organic electronic materials are rapidly emerging as superior replacements for a number of conventional electronic materials, such as metals and semiconductors. Conducting polymers, carbon nanotubes, graphenes, organic light-emitting diodes, and diamond films fabricated via chemical vapor deposition are the most popular organic bioelectronic materials that are currently under active research and development. Besides the capability to translate biological signals to electrical signals or vice versa, organic bioelectronic materials entail greater biocompatibility and biodegradability compared to conventional electronic materials, which makes them more suitable for biomedical applications. When patterned, these materials bring about numerous capabilities to perform various tasks in a more-sophisticated and high-throughput manner. Here, we provide an overview of the unique properties of organic bioelectronic materials, different strategies applied to pattern these materials, and finally their applications in the field of biomedical engineering, particularly biosensing, cell and tissue engineering, actuators, and drug delivery.
Collapse
Affiliation(s)
- SooHyun Park
- Department of Biomedical Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
| | - You Jung Kang
- Department of Biomedical Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
| | - Sheereen Majd
- Department of Biomedical Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
- Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA, 16802, USA
- Materials Research Institute, The Pennsylvania State University, University Park, PA, 16802, USA
| |
Collapse
|
27
|
Slepicka P, Kasalkova NS, Siegel J, Kolska Z, Bacakova L, Svorcik V. Nano-structured and functionalized surfaces for cytocompatibility improvement and bactericidal action. Biotechnol Adv 2015; 33:1120-9. [DOI: 10.1016/j.biotechadv.2015.01.001] [Citation(s) in RCA: 91] [Impact Index Per Article: 10.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/16/2014] [Revised: 12/12/2014] [Accepted: 01/07/2015] [Indexed: 12/17/2022]
|
28
|
Lee JH, Park HK, Kim KS. Intrinsic and extrinsic mechanical properties related to the differentiation of mesenchymal stem cells. Biochem Biophys Res Commun 2015; 473:752-7. [PMID: 26403968 DOI: 10.1016/j.bbrc.2015.09.081] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/19/2015] [Accepted: 09/13/2015] [Indexed: 01/07/2023]
Abstract
Diverse intrinsic and extrinsic mechanical factors have a strong influence on the regulation of stem cell fate. In this work, we examined recent literature on the effects of mechanical environments on stem cells, especially on differentiation of mesenchymal stem cells (MSCs). We provide a brief review of intrinsic mechanical properties of single MSC and examined the correlation between the intrinsic mechanical property of MSC and the differentiation ability. The effects of extrinsic mechanical factors relevant to the differentiation of MSCs were considered separately. The effect of nanostructure and elasticity of the matrix on the differentiation of MSCs were summarized. Finally, we consider how the extrinsic mechanical properties transfer to MSCs and then how the effects on the intrinsic mechanical properties affect stem cell differentiation.
Collapse
Affiliation(s)
- Jin-Ho Lee
- School of Medicine, Kyung Hee University, Seoul, Republic of Korea
| | - Hun-Kuk Park
- Department of Biomedical Engineering, College of Medicine, Kyung Hee University, Seoul, Republic of Korea; Healthcare Industry Research Institute, Kyung Hee University, Seoul, Republic of Korea; Program of Medical Engineering, Kyung Hee University, Seoul, Republic of Korea
| | - Kyung Sook Kim
- Department of Biomedical Engineering, College of Medicine, Kyung Hee University, Seoul, Republic of Korea; Program of Medical Engineering, Kyung Hee University, Seoul, Republic of Korea.
| |
Collapse
|
29
|
Lyu CQ, Lu JY, Cao CH, Luo D, Fu YX, He YS, Zou DR. Induction of Osteogenic Differentiation of Human Adipose-Derived Stem Cells by a Novel Self-Supporting Graphene Hydrogel Film and the Possible Underlying Mechanism. ACS APPLIED MATERIALS & INTERFACES 2015; 7:20245-20254. [PMID: 26323463 DOI: 10.1021/acsami.5b05802] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
Graphene and its derivatives have received increasing attention from scientists in the field of biomedical sciences because of their unique physical properties, which are responsible for their interesting biological functions. With a range of extraordinary properties such as high surface area, high mechanical strength, and ease of functionalization, graphene is considered highly promising for application in bone tissue engineering. Here, we examined the effect of using a self-supporting graphene hydrogel (SGH) film to induce the osteogenic differentiation of human adipose-derived stem cells (hADSCs). In comparison to conventional graphene and carbon fiber films, the SGH film had higher mechanical strength and flexibility. Moreover, we found that the SGH film was nontoxic and biocompatible. Of particular interest is the fact that the film alone could stimulate the osteogenic differentiation of hADSCs, independent of additional chemical inducers. Such effects are stronger for the SGH film than for graphene or carbon fiber films, although the induction capacity of the SGH film is not as high as that of the osteogenic-induced medium. The excellent osteoinductivity of the SGH film is closely related to its remarkable physical properties that include specific nanostructures, surface morphology, strong cell adherence, reasonable surface hydrophilicity, and high protein absorption.
Collapse
Affiliation(s)
- Cheng-Qi Lyu
- Department of Stomatology, Shanghai Jiao Tong University Affiliated Sixth People's Hospital , 600 Yishan Road, Shanghai 200233, China
| | - Jia-Yu Lu
- Department of Stomatology, Shanghai Jiao Tong University Affiliated Sixth People's Hospital , 600 Yishan Road, Shanghai 200233, China
| | - Chun-Hua Cao
- Department of Stomatology, Shanghai Jiao Tong University Affiliated Sixth People's Hospital , 600 Yishan Road, Shanghai 200233, China
| | - Deng Luo
- Department of Endocrinology and Metabolism, Shanghai Key Laboratory of Diabetes Mellitus; Diabetes Institute, Shanghai Jiao Tong University Affiliated Sixth People's Hospital , 600 Yishan Road, Shanghai 200233, China
| | - Yin-Xin Fu
- Department of Clinical Laboratory, Pu'ai Hospital Affiliated to Tongji Medical College, Huazhong University of Science and Technology , Wuhan 430034, China
| | - Yu-Shi He
- Shanghai Electrochemical Energy Devices Research Center, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University , Shanghai 200240, China
| | - De-Rong Zou
- Department of Stomatology, Shanghai Jiao Tong University Affiliated Sixth People's Hospital , 600 Yishan Road, Shanghai 200233, China
| |
Collapse
|
30
|
Qasim SB, Delaine-Smith RM, Fey T, Rawlinson A, Rehman IU. Freeze gelated porous membranes for periodontal tissue regeneration. Acta Biomater 2015; 23:317-328. [PMID: 25968357 DOI: 10.1016/j.actbio.2015.05.001] [Citation(s) in RCA: 71] [Impact Index Per Article: 7.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2015] [Revised: 04/02/2015] [Accepted: 05/04/2015] [Indexed: 01/12/2023]
Abstract
Guided tissue regeneration (GTR) membranes have been used for the management of destructive forms of periodontal disease as a means of aiding regeneration of lost supporting tissues, including the alveolar bone, cementum, gingiva and periodontal ligaments (PDL). Currently available GTR membranes are either non-biodegradable, requiring a second surgery for removal, or biodegradable. The mechanical and biofunctional limitations of currently available membranes result in a limited and unpredictable treatment outcome in terms of periodontal tissue regeneration. In this study, porous membranes of chitosan (CH) were fabricated with or without hydroxyapatite (HA) using the simple technique of freeze gelation (FG) via two different solvents systems, acetic acid (ACa) or ascorbic acid (ASa). The aim was to prepare porous membranes to be used for GTR to improve periodontal regeneration. FG membranes were characterized for ultra-structural morphology, physiochemical properties, water uptake, degradation, mechanical properties, and biocompatibility with mature and progenitor osteogenic cells. Fourier transform infrared (FTIR) spectroscopy confirmed the presence of hydroxyapatite and its interaction with chitosan. μCT analysis showed membranes had 85-77% porosity. Mechanical properties and degradation rate were affected by solvent type and the presence of hydroxyapatite. Culture of human osteosarcoma cells (MG63) and human embryonic stem cell-derived mesenchymal progenitors (hES-MPs) showed that all membranes supported cell proliferation and long term matrix deposition was supported by HA incorporated membranes. These CH and HA composite membranes show their potential use for GTR applications in periodontal lesions and in addition FG membranes could be further tuned to achieve characteristics desirable of a GTR membrane for periodontal regeneration.
Collapse
|
31
|
Garrett DJ, Saunders AL, McGowan C, Specks J, Ganesan K, Meffin H, Williams RA, Nayagam DA. In vivo
biocompatibility of boron doped and nitrogen included conductive‐diamond for use in medical implants. J Biomed Mater Res B Appl Biomater 2015; 104:19-26. [DOI: 10.1002/jbm.b.33331] [Citation(s) in RCA: 46] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2014] [Revised: 10/12/2014] [Accepted: 11/04/2014] [Indexed: 11/10/2022]
Affiliation(s)
- David J. Garrett
- The Bionics Institute384‐388 Albert StreetEast Melbourne Victoria3002 Australia
- School of Physics, The University of Melbourne Victoria3010 Australia
| | - Alexia L. Saunders
- The Bionics Institute384‐388 Albert StreetEast Melbourne Victoria3002 Australia
| | - Ceara McGowan
- The Bionics Institute384‐388 Albert StreetEast Melbourne Victoria3002 Australia
| | - Joscha Specks
- Strategy Engineers GmbH & Co. KGPrinz‐Ludwig‐Straβe 780333Munich Germany
| | | | - Hamish Meffin
- NICTA, Department of Electrical and Electronic Engineering, The University of Melbourne Victoria3010 Australia
| | - Richard A. Williams
- Department of PathologyThe University of Melbourne Victoria3010 Australia
- Department of Anatomical PathologySt Vincent's HospitalFitzroy Victoria3065 Australia
| | - David A.X. Nayagam
- The Bionics Institute384‐388 Albert StreetEast Melbourne Victoria3002 Australia
- Department of PathologyThe University of Melbourne Victoria3010 Australia
| |
Collapse
|
32
|
Gümüşderelioğlu M, Tunçay EÖ, Kaynak G, Demirtaş TT, Aydın ST, Hakkı SS. Encapsulated boron as an osteoinductive agent for bone scaffolds. J Trace Elem Med Biol 2015; 31:120-8. [PMID: 26004902 DOI: 10.1016/j.jtemb.2015.03.008] [Citation(s) in RCA: 33] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 02/10/2015] [Revised: 03/17/2015] [Accepted: 03/26/2015] [Indexed: 11/17/2022]
Abstract
The aim of this study was to develop boron (B)-releasing polymeric scaffold to promote regeneration of bone tissue. Boric acid-doped chitosan nanoparticles with a diameter of approx. 175 nm were produced by tripolyphosphate (TPP)-initiated ionic gelation process. The nanoparticles strongly attached via electrostatic interactions into chitosan scaffolds produced by freeze-drying with approx. 100 μm pore diameter. According to the ICP-OES results, following first 5h initial burst release, fast release of B from scaffolds was observed for 24h incubation period in conditioned medium. Then, slow release of B was performed over 120 h. The results of the cell culture studies proved that the encapsulated boron within the scaffolds can be used as an osteoinductive agent by showing its positive effects on the proliferation and differentiation of MC3T3-E1 preosteoblastic cells.
Collapse
Affiliation(s)
| | - Ekin Ö Tunçay
- Hacettepe University, Department of Bioengineering, Ankara, Turkey
| | - Gökçe Kaynak
- Hacettepe University, Department of Bioengineering, Ankara, Turkey
| | - Tolga T Demirtaş
- Hacettepe University, Department of Bioengineering, Ankara, Turkey
| | - Seda Tığlı Aydın
- Bülent Ecevit University, Department of Biomedical Engineering, Zonguldak, Turkey
| | - Sema S Hakkı
- Selcuk University, Faculty of Dentistry, Department of Periodontology, Konya, Turkey
| |
Collapse
|
33
|
Hakki SS, Dundar N, Kayis SA, Hakki EE, Hamurcu M, Baspinar N, Basoglu A, Nielsen FH, Götz W. Dietary boron does not affect tooth strength, micro-hardness, and density, but affects tooth mineral composition and alveolar bone mineral density in rabbits fed a high-energy diet. J Trace Elem Med Biol 2015; 29:208-15. [PMID: 25468191 DOI: 10.1016/j.jtemb.2014.10.007] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 07/21/2014] [Revised: 10/10/2014] [Accepted: 10/15/2014] [Indexed: 01/15/2023]
Abstract
The objective of this study was to determine whether dietary boron (B) affects the strength, density and mineral composition of teeth and mineral density of alveolar bone in rabbits with apparent obesity induced by a high-energy diet. Sixty female, 8-month-old, New Zealand rabbits were randomly assigned for 7 months into five groups as follows: (1) control 1, fed alfalfa hay only (5.91 MJ/kg and 57.5 mg B/kg); (2) control 2, high energy diet (11.76 MJ and 3.88 mg B/kg); (3) B10, high energy diet + 10 mg B gavage/kg body weight/96 h; (4) B30, high energy diet + 30 mg B gavage/kg body weight/96 h; (5) B50, high energy diet + 50 mg B gavage/kg body weight/96 h. Maxillary incisor teeth of the rabbits were evaluated for compression strength, mineral composition, and micro-hardness. Enamel, dentin, cementum and pulp tissue were examined histologically. Mineral densities of the incisor teeth and surrounding alveolar bone were determined by using micro-CT. When compared to controls, the different boron treatments did not significantly affect compression strength, and micro-hardness of the teeth, although the B content of teeth increased in a dose-dependent manner. Compared to control 1, B50 teeth had decreased phosphorus (P) concentrations. Histological examination revealed that teeth structure (shape and thickness of the enamel, dentin, cementum and pulp) was similar in the B-treated and control rabbits. Micro CT evaluation revealed greater alveolar bone mineral density in B10 and B30 groups than in controls. Alveolar bone density of the B50 group was not different than the controls. Although the B treatments did not affect teeth structure, strength, mineral density and micro-hardness, increasing B intake altered the mineral composition of teeth, and, in moderate amounts, had beneficial effects on surrounding alveolar bone.
Collapse
|
34
|
Epithelial cell morphology and adhesion on diamond films deposited and chemically modified by plasma processes. Biointerphases 2014; 9:031012. [DOI: 10.1116/1.4890471] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
|
35
|
Zhang W, Patel K, Schexnider A, Banu S, Radadia AD. Nanostructuring of biosensing electrodes with nanodiamonds for antibody immobilization. ACS NANO 2014; 8:1419-28. [PMID: 24397797 PMCID: PMC4004312 DOI: 10.1021/nn405240g] [Citation(s) in RCA: 44] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/08/2023]
Abstract
While chemical vapor deposition of diamond films is currently cost prohibitive for biosensor construction, in this paper, we show that sonication-assisted nanostructuring of biosensing electrodes with nanodiamonds (NDs) allows harnessing the hydrolytic stability of the diamond biofunctionalization chemistry for real-time continuous sensing, while improving the detector sensitivity and stability. We find that the higher surface coverages were important for improved bacterial capture and can be achieved through proper choice of solvent, ND concentration, and seeding time. A mixture of methanol and dimethyl sulfoxide provides the highest surface coverage (33.6 ± 3.4%) for the NDs with positive zeta-potential, compared to dilutions of dimethyl sulfoxide with acetone, ethanol, isopropyl alcohol, or water. Through impedance spectroscopy of ND-seeded interdigitated electrodes (IDEs), we found that the ND seeds serve as electrically conductive islands only a few nanometers apart. Also we show that the seeded NDs are amply hydrogenated to be decorated with antibodies using the UV-alkene chemistry, and higher bacterial captures can be obtained compared to our previously reported work with diamond films. When sensing bacteria from 10(6) cfu/mL E. coli O157:H7, the resistance to charge transfer at the IDEs decreased by ∼ 38.8%, which is nearly 1.5 times better than that reported previously using redox probes. Further in the case of 10(8) cfu/mL E. coli O157:H7, the charge transfer resistance changed by ∼ 46%, which is similar to the magnitude of improvement reported using magnetic nanoparticle-based sample enrichment prior to impedance detection. Thus ND seeding allows impedance biosensing in low conductivity solutions with competitive sensitivity.
Collapse
|
36
|
Poster Presentations. Regen Med 2013. [DOI: 10.2217/rme.13.pp] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
|
37
|
Wang S, Kowal TJ, Marei MK, Falk MM, Jain H. Nanoporosity significantly enhances the biological performance of engineered glass tissue scaffolds. Tissue Eng Part A 2013; 19:1632-40. [PMID: 23427819 PMCID: PMC3665319 DOI: 10.1089/ten.tea.2012.0585] [Citation(s) in RCA: 28] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/27/2012] [Accepted: 02/18/2013] [Indexed: 11/13/2022] Open
Abstract
Nanoporosity is known to impact the performance of implants and scaffolds such as bioactive glass (BG) scaffolds, either by providing a higher concentration of bioactive chemical species from enhanced surface area, or due to inherent nanoscale topology, or both. To delineate the role of these two characteristics, BG scaffolds have been fabricated with nearly identical surface area (81 and 83±2 m(2)/g) but significantly different pore size (av. 3.7 and 17.7 nm) by varying both the sintering temperature and the ammonia concentration during the solvent exchange phase of the sol-gel fabrication process. In vitro tests performed with MC3T3-E1 preosteoblast cells on such scaffolds show that initial cell attachment is increased on samples with the smaller nanopore size, providing the first direct evidence of the influence of nanopore topography on cell response to a bioactive structure. Furthermore, in vivo animal tests in New Zealand rabbits (subcutaneous implantation) indicate that nanopores promote colonization and cell penetration into these scaffolds, further demonstrating the favorable effects of nanopores in tissue-engineering-relevant BG scaffolds.
Collapse
Affiliation(s)
- Shaojie Wang
- Department of Materials Science and Engineering, Lehigh University, Bethlehem, Pennsylvania
| | - Tia J. Kowal
- Department of Biological Sciences, Lehigh University, Bethlehem, Pennsylvania
| | - Mona K. Marei
- Tissue Engineering Laboratory, Faculty of Dentistry, Alexandria University, Alexandria, Egypt
| | - Matthias M. Falk
- Department of Biological Sciences, Lehigh University, Bethlehem, Pennsylvania
| | - Himanshu Jain
- Department of Materials Science and Engineering, Lehigh University, Bethlehem, Pennsylvania
| |
Collapse
|
38
|
Ahmed S, Riegsecker S, Beamer M, Rahman A, Bellini JV, Bhansali P, Tillekeratne LMV. Largazole, a class I histone deacetylase inhibitor, enhances TNF-α-induced ICAM-1 and VCAM-1 expression in rheumatoid arthritis synovial fibroblasts. Toxicol Appl Pharmacol 2013; 270:87-96. [PMID: 23632129 DOI: 10.1016/j.taap.2013.04.014] [Citation(s) in RCA: 32] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/08/2013] [Revised: 04/18/2013] [Accepted: 04/19/2013] [Indexed: 11/24/2022]
Abstract
In the present study, we evaluated the effect of largazole (LAR), a marine-derived class I HDAC inhibitor, on tumor necrosis factor-α (TNF-α)-induced expression of intercellular adhesion molecule-1 (ICAM-1) and vascular cell adhesion molecule-1 (VCAM-1), and matrix metalloproteinase-2 (MMP-2) activity. LAR (1-5 μM) had no adverse effect on the viability of RA synovial fibroblasts. Among the different class I HDACs screened, LAR (0.5-5 μM) inhibited the constitutive expression of HDAC1 (0-30%). Surprisingly, LAR increased class II HDAC [HDAC6] by ~220% with a concomitant decrease in HDAC5 [30-58%] expression in RA synovial fibroblasts. SAHA (5 μM), a pan-HDAC inhibitor, also induced HDAC6 expression in RA synovial fibroblasts. Pretreatment of RA synovial fibroblasts with LAR further enhanced TNF-α-induced ICAM-1 and VCAM-1 expression. However, LAR inhibited TNF-α-induced MMP-2 activity in RA synovial fibroblasts by 35% when compared to the TNF-α-treated group. Further, the addition of HDAC6 specific inhibitor Tubastatin A with LAR suppressed TNF-α+LAR-induced ICAM-1 and VCAM-1 expression and completely blocked MMP-2 activity, suggesting a role of HDAC6 in LAR-induced ICAM-1 and VCAM-1 expression. LAR also enhanced TNF-α-induced phospho-p38 and phospho-AKT expression, but inhibited the expression of phospho-JNK and nuclear translocation of NF-κBp65 in RA synovial fibroblasts. These results suggest that LAR activates p38 and Akt pathways and influences class II HDACs, in particular HDAC6, to enhance some of the detrimental effects of TNF-α in RA synovial fibroblasts. Understanding the exact role of different HDAC isoenzymes in RA pathogenesis is extremely important in order to develop highly effective HDAC inhibitors for the treatment of RA.
Collapse
Affiliation(s)
- Salahuddin Ahmed
- Department of Pharmacology, College of Pharmacy & Pharmaceutical Sciences, The University of Toledo, Health Science Campus, Toledo, OH 43614, USA.
| | | | | | | | | | | | | |
Collapse
|
39
|
Catledge SA, Thomas V, Vohra YK. Nanostructured diamond coatings for orthopaedic applications. WOODHEAD PUBLISHING SERIES IN BIOMATERIALS 2013; 2013:105-150. [PMID: 25285213 PMCID: PMC4181380 DOI: 10.1533/9780857093516.2.105] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/10/2022]
Abstract
With increasing numbers of orthopaedic devices being implanted, greater emphasis is being placed on ceramic coating technology to reduce friction and wear in mating total joint replacement components, in order to improve implant function and increase device lifespan. In this chapter, we consider ultra-hard carbon coatings, with emphasis on nanostructured diamond, as alternative bearing surfaces for metallic components. Such coatings have great potential for use in biomedical implants as a result of their extreme hardness, wear resistance, low friction and biocompatibility. These ultra-hard carbon coatings can be deposited by several techniques resulting in a wide variety of structures and properties.
Collapse
Affiliation(s)
| | - V Thomas
- University of Alabama at Birmingham, USA
| | - Y K Vohra
- University of Alabama at Birmingham, USA
| |
Collapse
|
40
|
Marcon L, Addad A, Coffinier Y, Boukherroub R. Cell micropatterning on superhydrophobic diamond nanowires. Acta Biomater 2013; 9:4585-91. [PMID: 22922066 DOI: 10.1016/j.actbio.2012.08.026] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/02/2012] [Revised: 07/26/2012] [Accepted: 08/17/2012] [Indexed: 01/09/2023]
Abstract
Cell micropatterning was achieved in a spatially controlled manner based on heterogeneously wetted superhydrophilic/superhydrophobic diamond nanowire (NW) surfaces. Diamond NWs were synthesized on boron-doped diamond substrates using reactive ion etching and functionalized with octadecyltrichlorosilane to achieve superhydrophobicity. Superhydrophilic motifs of 400×400 μm(2) and 10×10 μm(2) single cell-sized motifs, surrounded by superhydrophobic regions, were then generated by selectively exposing the substrates to UV light. This design allowed successful patterning of single HeLa and MCF-10A cells within the superhydrophilic regions without additional surface modification. To add a further level of complexity, micropatterned co-cultures were obtained using bovine serum albumin to promote cell adhesion. This method is simple and does not require any complicated processing steps such as mask deposition or template removal. Potential applications are in the development of cell-based biological assays in well-controlled and biologically relevant environments.
Collapse
|
41
|
Doyard M, Fatih N, Monnier A, Island ML, Aubry M, Leroyer P, Bouvet R, Chalès G, Mosser J, Loréal O, Guggenbuhl P. Iron excess limits HHIPL-2 gene expression and decreases osteoblastic activity in human MG-63 cells. Osteoporos Int 2012; 23:2435-45. [PMID: 22237814 DOI: 10.1007/s00198-011-1871-z] [Citation(s) in RCA: 43] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 11/10/2011] [Accepted: 12/05/2011] [Indexed: 01/10/2023]
Abstract
UNLABELLED In order to understand mechanisms involved in osteoporosis observed during iron overload diseases, we analyzed the impact of iron on a human osteoblast-like cell line. Iron exposure decreases osteoblast phenotype. HHIPL-2 is an iron-modulated gene which could contribute to these alterations. Our results suggest osteoblast impairment in iron-related osteoporosis. INTRODUCTION Iron overload may cause osteoporosis. An iron-related decrease in osteoblast activity has been suggested. METHODS We investigated the effect of iron exposure on human osteoblast cells (MG-63) by analyzing the impact of ferric ammonium citrate (FAC) and iron citrate (FeCi) on the expression of genes involved in iron metabolism or associated with osteoblast phenotype. A transcriptomic analysis was performed to identify iron-modulated genes. RESULTS FAC and FeCi exposure modulated cellular iron status with a decrease in TFRC mRNA level and an increase in intracellular ferritin level. FAC increased ROS level and caspase 3 activity. Ferroportin, HFE and TFR2 mRNAs were expressed in MG-63 cells under basal conditions. The level of ferroportin mRNA was increased by iron, whereas HFE mRNA level was decreased. The level of mRNA alpha 1 collagen type I chain, osteocalcin and the transcriptional factor RUNX2 were decreased by iron. Transcriptomic analysis revealed that the mRNA level of HedgeHog Interacting Protein Like-2 (HHIPL-2) gene, encoding an inhibitor of the hedgehog signaling pathway, was decreased in the presence of FAC. Specific inhibition of HHIPL-2 expression decreased osteoblast marker mRNA levels. Purmorphamine, hedgehog pathway activator, increased the mRNA level of GLI1, a target gene for the hedgehog pathway, and decreased osteoblast marker levels. GLI1 mRNA level was increased under iron exposure. CONCLUSION We showed that in human MG-63 cells, iron exposure impacts iron metabolism and osteoblast gene expression. HHIPL-2 gene expression modulation may contribute to these alterations. Our results support a role of osteoblast impairment in iron-related osteoporosis.
Collapse
Affiliation(s)
- M Doyard
- INSERM, UMRU991, CHU Pontchaillou, 35033 Rennes Cedex, France
| | | | | | | | | | | | | | | | | | | | | |
Collapse
|
42
|
Parizek M, Douglas TEL, Novotna K, Kromka A, Brady MA, Renzing A, Voss E, Jarosova M, Palatinus L, Tesarek P, Ryparova P, Lisa V, dos Santos AM, Warnke PH, Bacakova L. Nanofibrous poly(lactide-co-glycolide) membranes loaded with diamond nanoparticles as promising substrates for bone tissue engineering. Int J Nanomedicine 2012; 7:1931-51. [PMID: 22619532 PMCID: PMC3356197 DOI: 10.2147/ijn.s26665] [Citation(s) in RCA: 30] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/18/2023] Open
Abstract
BACKGROUND Nanofibrous scaffolds loaded with bioactive nanoparticles are promising materials for bone tissue engineering. METHODS In this study, composite nanofibrous membranes containing a copolymer of L-lactide and glycolide (PLGA) and diamond nanoparticles were fabricated by an electrospinning technique. PLGA was dissolved in a mixture of methylene chloride and dimethyl formamide (2:3) at a concentration of 2.3 wt%, and nanodiamond (ND) powder was added at a concentration of 0.7 wt% (about 23 wt% in dry PLGA). RESULTS In the composite scaffolds, the ND particles were either arranged like beads in the central part of the fibers or formed clusters protruding from the fibers. In the PLGA-ND membranes, the fibers were thicker (diameter 270 ± 9 nm) than in pure PLGA meshes (diameter 218 ± 4 nm), but the areas of pores among these fibers were smaller than in pure PLGA samples (0.46 ± 0.02 μm(2) versus 1.28 ± 0.09 μm(2) in pure PLGA samples). The PLGA-ND membranes showed higher mechanical resistance, as demonstrated by rupture tests of load and deflection of rupture probe at failure. Both types of membranes enabled the attachment, spreading, and subsequent proliferation of human osteoblast-like MG-63 cells to a similar extent, although these values were usually lower than on polystyrene dishes. Nevertheless, the cells on both types of membranes were polygonal or spindle-like in shape, and were distributed homogeneously on the samples. From days 1-7 after seeding, their number rose continuously, and at the end of the experiment, these cells were able to create a confluent layer. At the same time, the cell viability, evaluated by a LIVE/DEAD viability/cytotoxicity kit, ranged from 92% to 97% on both types of membranes. In addition, on PLGA-ND membranes, the cells formed well developed talin-containing focal adhesion plaques. As estimated by the determination of tumor necrosis factor-alpha levels in the culture medium and concentration of intercellular adhesion molecule-1, MG-63 cells, and RAW 264.7 macrophages on these membranes did not show considerable inflammatory activity. CONCLUSION This study shows that nanofibrous PLGA membranes loaded with diamond nanoparticles have interesting potential for use in bone tissue engineering.
Collapse
Affiliation(s)
- Martin Parizek
- Department of Biomaterials and Tissue Engineering, Institute of Physiology, Academy of Sciences of the Czech Republic, Prague, Czech Republic
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Collapse
|
43
|
Shen D, Wang X, Zhang L, Zhao X, Li J, Cheng K, Zhang J. The amelioration of cardiac dysfunction after myocardial infarction by the injection of keratin biomaterials derived from human hair. Biomaterials 2011; 32:9290-9. [PMID: 21885119 DOI: 10.1016/j.biomaterials.2011.08.057] [Citation(s) in RCA: 51] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/02/2011] [Accepted: 08/18/2011] [Indexed: 01/01/2023]
Abstract
Cardiac dysfunction following acute myocardial infarction is a major cause of advanced cardiomyopathy. Conventional pharmacological therapies rely on prompt reperfusion and prevention of repetitive maladaptive pathways. Keratin biomaterials can be manufactured in an autologous fashion and are effective in various models of tissue regeneration. However, its potential application in cardiac regeneration has not been tested. Keratin biomaterials were derived from human hair and its structure morphology, carryover of beneficial factors, biocompatibility with cardiomyocytes, and in vivo degradation profile were characterized. After delivery into infarcted rat hearts, the keratin scaffolds were efficiently infiltrated by cardiomyocytes and endothelial cells. Injection of keratin biomaterials promotes angiogenesis but does not exacerbate inflammation in the post-MI hearts. Compared to control-injected animals, keratin biomaterials-injected animals exhibited preservation of cardiac function and attenuation of adverse ventricular remodeling over the 8 week following time course. Tissue western blot analysis revealed up-regulation of beneficial factors (BMP4, NGF, TGF-beta) in the keratin-injected hearts. The salient functional benefits, the simplicity of manufacturing and the potentially autologous nature of this biomaterial provide impetus for further translation to the clinic.
Collapse
Affiliation(s)
- Deliang Shen
- Department of Cardiology, First Affiliated Hospital, College of Medicine, Zhengzhou University, Zhengzhou, Henan 450052, China
| | | | | | | | | | | | | |
Collapse
|