Triethylene Glycol Up-Regulates Virulence-Associated Genes and Proteins in Streptococcus mutans

The Role of Oral Environmental Factors in the Degradation of Resin-Dentin Interfaces: A Comprehensive Review

OBJECTIVES

Despite the considerable benefits of using resin composites for dental defect restoration, the resin-dentin interface remains highly vulnerable to contamination within the complex oral microenvironment. This article reviews the causes, contributing factors, and preventive measures affecting resin-dentin bonding.

DATA

Data were collected using the following keywords: bond strength, resin, dentin, saliva, bacteria, blood, contamination, smear layer, hybrid layer, fluorination, and antibacterial ingredients.

SOURCES

An electronic search was conducted using PubMed and Web of Science databases. Bibliographic references from the reviewed papers were then used to identify additional relevant publications.

CONCLUSION

Salivary esterases break down ester linkages in resin monomers, resulting in monomer leaching and subsequent polymer degradation. Bacterial activity exacerbates this interfacial breakdown through enzymatic processes and acid production, thereby accelerating adhesive failure. Blood contamination further compromises resin-dentin bonding by forming protein-rich barriers that hinder adhesive penetration. Additionally, we systematically summarise evidence-based strategies to enhance bond strength, including-but not limited to-the incorporation of fluoride compounds and antibacterial monomers.

CLINICAL SIGNIFICANCE

This review offers a comprehensive overview of the various contaminants in the oral microenvironment that may compromise the resin-dentin interface, either directly or indirectly. It also highlights actionable strategies for improving adhesive performance, thereby serving as a valuable reference for clinicians and researchers aiming to optimise restorative outcomes.

The Incorporation of Copper-Doped Bioactive Glass Nanoparticles into Resin Composites Improves Their Biological, Mechanical and Adhesive Properties

PURPOSE

This study aims to develop and characterize copper-doped bioactive glass nanoparticles (BG/CuNp), and to evaluate the effects of their addition into a resin composite on antimicrobial activity (AMA), cytotoxicity (CTX), ultimate tensile strength (UTS), Knoop microhardness (KHN), as well as immediate resin-dentin microtensile bond strength (μTBS), nanoleakage (NL) and in-situ degree of conversion (DC).

MATERIALS AND METHODS

BG/CuNp were added to a resin composite at different concentrations (0% [control]; 5, 10 and 20 wt%). The AMA was evaluated against Streptococcus mutans. For CTX, the Gingival mesenchymal stem cells (GMSC) cell line was used. For UTS and KHN, specimens were tested after 24 h and 28 days. For bonding evaluation, a universal adhesive was applied on flat dentin surfaces, experimental resin composite build-ups were prepared, and specimens were sectioned to obtain resin-dentin sticks. These were evaluated for μTBS, NL and DC after water storage. Data were submitted to statistical analyses (α = 0.05).

RESULTS

The addition of 5% and 10% of BG/CuNp increases AMA (P 0.05), while the CTX remained unchanged with resin-containing BG/CuNp (P > 0.05). UTS and KHN remained stable with the addition of 5% and 10% of BG/CuNp at 24 h, but showed significantly higher values compared to the control after 28 d (P 0.05). μTBS and in-situ DC remained unchanged with BG/CuNp addition, regardless of the concentration added. However, significantly lower NL was observed for BG/CuNp groups (P 0.05).

CONCLUSION

The addition of BG/CuNp in the tested concentrations into a resin composite may be an alternative to provide antimicrobial activity and improve the integrity of the hybrid layer, without compromising biological, adhesives and mechanical properties.

Evolution of Dental Resin Adhesives-A Comprehensive Review

This comprehensive review of dental resin adhesives explores their historical development, key components, recent innovations, and potential future directions, highlighting a dynamic and continually advancing field. From Buonocore's breakthrough acid-etching technique and Bowen's pioneering dental resin invention, successive generations of clinicians and scientists have pushed forward the technological and materials development for secure bonding, while preserving dental tissues. The review discusses the substantial advances in improving adhesive reliability, enabling more conservative treatment approaches. It also delves into enhancing fundamental adhesive components and their synergistic combinations. Recent innovations, including biostable and functional resins, nanotechnology, and bioactive components, address persistent challenges such as durability, antimicrobial efficacy, and therapeutic functionality. Emerging technologies, such as digital dentistry, artificial intelligence, and bioinspired adhesives, portend an exciting and promising future for dental adhesives. This review underscores the critical role of ongoing research in developing biocompatible, multifunctional, and durable adhesives. It aims to support dental professionals and researchers by providing a comprehensive understanding of the dynamic progression of dental adhesives, inspiring continued innovation and excellence in restorative dentistry.

Development of Functional and Hydrolytically Stable Vinyl Monomers as Methacrylate Dental Resin Restorative Alternatives

Dental resin-based restorative (RBR) materials represent the most ubiquitous biomaterials utilized globally. Methacrylate (MA)-ester based monomers - present in RBRs since the 1960s - experience significantly elevated rates of failure compared to previously used silver/amalgam fillings attributed to their hydrolysis reported in both simulated and in vivo environments. There is currently no alternative RBR chemistry that matches the functional and clinical workflow considerations of MA-RBRs while addressing their limited-service lives. The objective of this work is to utilize a systematic framework to develop alternative hydrolytically-stable monomers (HSMs), assessing key physical properties, biostability, and cytocompatibility towards eliminating or reducing the biodegradation of RBRs. This process yielded HSMs (referreed to as 3BE, 3TE) that matched the physical properties of MA-control materials, including viscosity, polymerization conversion, hydrophilicity, water uptake, and surface hardness (p > 0.05), while outperforming MA-based materials in all simulated oral environments, showing improved biostability in reconstituted human saliva, simulated human salivary esterase (SHSE), bacterial culture, and acidic media (p < 0.05). Additionally, HSMs were found to be less cytotoxic than commercial MA-monomers (p < 0.05) and unlikely to be genotoxic. Therefore, the HSMs and associated resins developed in this study have the potential to significantly improve the clinical service life of RBRs, without compromising their fundamental features.

Synergistic effects of bacteria, enzymes, and cyclic mechanical stresses on the bond strength of composite restorations

Predicting how tooth and dental material bonds perform in the mouth requires a deep understanding of degrading factors. Yet, this understanding is incomplete, leading to significant uncertainties in designing and evaluating new dental adhesives. The durability of dental bonding interfaces in the oral microenvironment is compromised by bacterial acids, salivary enzymes, and masticatory fatigue. These factors degrade the bond between dental resins and tooth surfaces, making the strength of these bonds difficult to predict. Traditionally studied separately, a combined kinetic analysis of these interactions could enhance our understanding and improvement of dental adhesive durability. To address this issue, we developed and validated an original model to evaluate the bond strength of dental restorations using realistic environments that consider the different mechanical, chemical, and biological degradative challenges working simultaneously: bacteria, salivary esterases, and cyclic loading. We herein describe a comprehensive investigation on dissociating the factors that degrade the bond strength of dental restorations. Our results showed that cariogenic bacteria are the number one factor contributing to the degradation of the bonded interface, followed by cyclic loading and salivary esterases. When tested in combinatorial mode, negative and positive synergies towards the degradation of the interface were observed. Masticatory loads (i.e., cycling loading) enhanced the lactic acid bacterial production and the area occupied by the biofilm at the bonding interface, resulting in more damage at the interface and a reduction of 73 % in bond strength compared to no-degraded samples. Salivary enzymes also produced bond degradation caused by changes in the chemical composition of the resin/adhesive. However, the degradation rates are slowed compared to the bacteria and cyclic loading. These results demonstrate that our synergetic model could guide the design of new dental adhesives for biological applications without laborious trial-and-error experimentation.

Identification of two-component system ArcAB and the universal stress protein E in Pasteurella multocida and their effects on bacterial fitness and pathogenesis

Two-component regulatory system (TCS) is a widespread bacterial signal transduction mechanism and plays a critical role in bacterial adaptation to environments as well as regulating bacterial virulence. However, few studies have reported the actions of TCS in Pasteurella multocida, a zoonotic bacterial pathogen. In this study, genes encoding proteins homologous to the ArcAB TCS were identified in genome sequences of P. multocida belonging to different serogroups, and the transcription of both arcA and arcB was up-regulated in anaerobic and superoxygen environment. Compared to wild type strains, P. multocida arcA-deletion mutants (ΔarcA) displayed a decrease in growing under anaerobic conditions, biofilm formation, as well as the capacities of anti-serum bactericidal effect, cell adherence and invasion, anti-phagocytosis, and virulence in different in vivo models (Galleria mellonella and mice). RNA-Seq identified 70 significantly downregulated genes in ΔarcA compared to the wild type strain, and several of them are associated with P. multocida virulence. Among them, a universal stress protein E encoding gene uspE was characterized in P. multocida for the first time. Electrophoretic mobility shift assay (EMSA) demonstrated that the ArcAB TCS could regulate uspE directly. Deletion of uspE also led to a decrease of P. multocida in growing under anaerobic conditions, biofilm formation, anti-serum bactericidal effect, cell adherence and invasion, anti-phagocytosis, and virulence in mice. The data provided from this study will help further understanding the fitness and pathogenesis of P. multocida.

Mechanistic study of the stabilization of dentin-bonded restorative interfaces via collagen reinforcement by multi-acrylamides

Hydrolytically and enzymatically-stable multi-acrylamides have been proposed to increase the long-term durability of dental adhesive interfaces as alternatives to methacrylates. The aim of this study was to investigate the mechanical and biochemical properties of experimental adhesives containing multi-functional acrylamides concerning collagen reinforcement and metalloproteinases (MMP) activity. Multi-functional acrylamides, TMAAEA (Tris[(2-methylaminoacryl) ethylamine) and DEBAAP (N,N-Diethyl-1,3-bis(acrylamido) propane), along with the commercially available DMAM (N,N-dimethylacrylamide) (monofunctional acrylamide) and HEMA (2-Hydroxyethyl methacrylate) (monofunctional methacrylate - control) were tested for stability against enzymatic hydrolysis by cholesterol esterase/pseudocholinesterase (PC/PCE) solutions for up to 30 days. Collagen-derived substrate and gelatin zymography were performed to examine the effect of the compounds on the biological activity of human recombinant and dentin-extracted gelatinases MMP-2 and MMP-9. In situ zymography was carried out by fluorescent collagen degradation combined with confocal microscopy analysis. Hydroxyproline content was measured in collagen derived from dentin extracts though reaction with Ehrlich's reagent p-dimethylaminobenzaldehyde (DMAB), generating a stable chromophore measured at 550 nm. Storage shear modulus of demineralized dentin discs treated with the tested compounds was measured by oscillatory rheometry, in order to investigate potential collagen reinforcement. FT-IR was performed to determine qualitative differences in collagen based on observed changes in amide bands. The results were analyzed by ANOVA/Tukey's test (α = 0.05). Multi-acrylamides survived 30 days of incubation in cholinesterase/pseudo-cholinesterase (PC/PCE) solutions, while HEMA showed approximately 70 % overall degradation. Incubation with multi-acrylamides reduced collagen degradation as evidenced by the reduced hydroxyproline levels and by the 30 % increase inshear storage modulus. Biochemical and zymography assays showed no noticeable inhibition of recombinant and extracted MMPs enzymatic activity. The infra-red spectroscopy results for multi-functional acrylamides treated samples demonstrated shifts of the amide II bonds and marked increase in intensity of the bands 1200 cm-1, which may indicate partial collagen denaturation and some degree of cross-linking of the compounds with collagen, respectively. The multi-acrylamides exhibited not only comparable mechanical properties but also demonstrated significantly enhanced biochemical stability when compared to the widely used methacrylate control. Clinical relevance: These findings highlight the potential of multi-acrylamides to increase the bonding stability to tissues and, ultimately, contribute to the longevity of dental restorations.

Dental composite biodeterioration in the presence of oral Streptococci and extracellular metabolic products

OBJECTIVE

Secondary caries is a primary cause of early restoration failure. While primary dental caries has been extensively researched, our knowledge about the impact of secondary caries on dental restorations is relatively limited. In this study, we examined how different clinically relevant microbially-influenced environments impact the degradation of nano-filled (FIL) and micro-hybrid (AEL) dental composites.

METHODS

Material strength of two commercial dental composites was measured following incubation in aqueous media containing: i) cariogenic (Streptococcus mutans) and non-cariogenic bacteria (Streptococcus sanguinis) grown on sucrose or glucose, ii) abiotic mixtures of artificial saliva and sucrose and glucose fermentation products (volatile fatty acids and ethanol) in proportions known to be produced by these microorganisms, and iii) abiotic mixtures of artificial saliva and esterase, a common oral extracellular enzyme.

RESULTS

Nano-filled FIL composite strength decreased in all three types of incubations, while micro-hybrid AEL composite strength only decreased significantly in biotic incubations. The strength of both composites was statistically significantly decreased in all biotic incubations containing both cariogenic and non-cariogenic bacteria beyond that induced by either abiotic mixtures of fermentation products or esterase alone. Finally, there were no statistically significant differences in composite strength decrease among the tested biotic conditions.

CONCLUSIONS

The results show that conditions created during the growth of both cariogenic and non-cariogenic oral Streptococci substantially reduce commercial composite strength, and this effect warrants further study to identify the mechanism(s).

CLINICAL SIGNIFICANCE

Dental biofilms of oral Streptococci bacteria significantly affect the mechanical strength of dental restorations.

Biodegradation of Urethane Dimethacrylate-based materials (CAD/CAM resin-ceramic composites) and its effect on the adhesion and proliferation of Streptococcus mutans

OBJECTIVE

To investigate whether urethane dimethacrylate (UDMA) -based dental restorative materials biodegrade in the presence of Streptococcus mutans (S. mutans) and whether the monomers affect the adhesion and proliferation of S. mutans in turn.

METHODS

Cholesterol esterase and pseudocholinesterase-like activities in S. mutans were detected using p-nitrophenyl substrate. Two UDMA-based CAD/CAM resin-ceramic composites, Lava Ultimate (LU) and Vita Enamic (VE), and a light-cured UDMA resin block were co-cultured with S. mutans for 14 days. Their surfaces were characterized by scanning electron microscopy and laser microscopy, and the byproducts of biodegradation were examined by Ultra Performance Liquid Chromatography-Tandem Mass Spectrometry (UPLC-MS/MS). Then, the antimicrobial components (silver nanoparticles with quaternary ammonium salts) were added to the UDMA resin block to detect whether the biodegradation was restrained. Finally, the effect of UDMA on biofilm formation and virulence expression of S. mutans was assessed.

RESULTS

Following a 14-day immersion, the LU and UDMA resin blocks' surface roughness increased. The LU and VE groups had no UDMA or its byproducts discovered, according to the UPLC-MS/MS data, whereas the light-cured UDMA block group had UDMA, urethane methacrylate (UMA), and urethane detected. The addition of antimicrobial agents showed a significant reduction in the release of UDMA. Biofilm staining experiments showed that UDMA promoted the growth of S. mutans biofilm and quantitative real-time polymerase chain reaction results indicated that 50 μg/mL UDMA significantly increase the expression of gtfB, comC, comD, comE, and gbpB genes within the biofilm.

CONCLUSIONS

UDMA in the light-cured resin can be biodegraded to produce UMA and urethane under the influence of S. mutans. The formation of early biofilm can be promoted and the expression of cariogenic genes can be up-regulated by UDMA.

CLINICAL SIGNIFICANCE

This study focuses for the first time on whether UDMA-based materials can undergo biodegradation and verifies from a genetic perspective that UDMA can promote the formation of S. mutans biofilms, providing a reference for the rational use of UDMA-based materials in clinical practice.

Surface Properties and Streptococcus mutans Biofilm Adhesion of Ion-Releasing Resin-Based Composite Materials

OBJECTIVE

To evaluate the adhesion of Streptococcus mutans (S. mutans) and related surface properties of ion-releasing resin-based composite (RBC) restorative materials.

METHODS

Two ion-releasing RBCs, Activa (ACT) and Cention-N (CN), were compared to a conventional RBC (Z350) and a resin-modified glass ionomer cement (Fuji-II-LC). Ten disk-shaped specimens were fabricated for each material (n=40). After standardized surface polishing procedure, the surface properties of the specimens were evaluated using surface roughness measurements by a profilometer and hydrophobicity using water contact angle measurements. To assess bacterial adhesion, the number of S. mutans bacteria was calculated from colony-forming units (CFU). Confocal laser scanning microscope analysis was done for qualitative & quantitative assessment. The data were analyzed using One-way ANOVA followed by Tukey's post-hoc test to compare the mean values of surface roughness, water contact angle and CFU values. To compare the mean dead cell percentage Kruskal-Wallis rank test and Conover test were used. A p-value of ≤ 0.05 was used to report the statistical significance.

RESULTS

Z350 and ACT had the smoothest surfaces, followed by CN, and the roughest surface was seen in FUJI-II-LC. The lowest water contact angles were seen in CN, and Z350, and the highest were in ACT. S. mutans counts were the highest in ACT and the lowest in Z350 and CN. CN and Fuji-II-LC registered the highest percentage of dead bacterial cells, while the lowest were in ACT.

SIGNIFICANCE

Surface properties did not significantly influence bacterial adhesion. More S. mutans bacteria accumulated on ACT than on the nanofilled composite and on CN. CN had antibacterial effects against Streptococcus mutans biofilms.

Detection of Bacteria-Induced Early-Stage Dental Caries Using Three-Dimensional Mid-Infrared Thermophotonic Imaging

Tooth decay, or dental caries, is a widespread and costly disease that is reversible when detected early in its formation. Current dental caries diagnostic methods including X-ray imaging and intraoral examination lack the sensitivity and specificity required to routinely detect caries early in its formation. Thermophotonic imaging presents itself as a highly sensitive and non-ionizing solution, making it suitable for the frequent monitoring of caries progression. Here, we utilized a treatment protocol to produce bacteria-induced caries lesions. The lesions were imaged using two related three-dimensional photothermal imaging modalities: truncated correlation photothermal coherence tomography (TC-PCT) and its enhanced modification eTC-PCT. In addition, micro-computed tomography (μ-CT) and visual inspection by a clinical dentist were used to validate and quantify the severities of the lesions. The observational findings demonstrate the high sensitivity and depth profiling capabilities of the thermophotonic modalities, showcasing their potential use as a non-ionizing clinical tool for the early detection of dental caries.

The effect of C/N ratio and its frequent addition on commensal and pathogenic bacterial abundances in shrimp Litopeaneus vanname gut in a biofloc system: Ratio and frequent addition interaction matters

The environmental biotic and abiotic factors form a complicated relationship with the host intestinal microbiota. In our study, we applied different levels of C/N ratio (10, 15, 20) and frequent addition times (once, twice, triple a day) in a factorial experimental design. GC/LC analysis of filtrated biofloc (BF) samples revealed the highest relative fold change for the untargeted bioactive molecules among different treatments, whereas the 16s rRNA analysis revealed the change in the shrimp gut microbiota composition. Based on the available literature on the relationship between the bioactive molecules and the available bacteria in this study, the next bioactive molecules were discussed. Proline was associated with Bacteroidota, Flavobacteriaceae, Gammaproteobacteria, and Flavobacteriales. Plumbagine was associated with Norcardiaceae. Phytosphingosin was associated with Bacteroidota. Phosphocholine compound was associated with Bacteroidota. The monobutyl ether, benzofuran, and piperidone were associated with Micobacteriaceae and Mycobacterium. Generally, C/N 15 and 20 once a day, and C/N 20 triple a day have showed a merit over other treatments in term of low pathogenic and unfavorable bacteria, and high commensal bacterial abundances. The revealed bioactive molecule composition showed the complicity of BF as a source for novel compounds as biosecurity agents in BF system. These molecules could be developed to feed additives upgrading the biosecurity level in aquaculture systems. Other bioactive molecules require future studies to reveal novel molecules in term of aquaculture biosecurity control.

Biodegradation of Dental Resin-Based Composite—A Potential Factor Affecting the Bonding Effect: A Narrative Review

In recent years, although resin composite has played an important role in the restoration of tooth defects, it still has several disadvantages, including being biodegraded by saliva, bacteria and other enzymes in the oral cavity, which may result in repair failure. This factor is not conducive to the long-term survival of the prosthesis in the mouth. In this article, we review the causes, influencing factors and prevention methods of resin biodegradation. Biodegradation is mainly caused by esterase in saliva and bacteria, which breaks the ester bond in resin and causes the release of monomers. The mechanical properties of the prosthesis can then be affected. Meanwhile, cathepsin and MMPs are activated on the bonding surface, which may decompose the dentin collagen. In addition, neutrophils and residual water on the bonding surface can also aggravate biodegradation. Currently, the primary methods to prevent biodegradation involve adding antibacterial agents to resin, inhibiting the activity of MMPs and enhancing the crosslinking of collagen fibers. All of the above indicates that in the preparation and adhesion of resin materials, attention should be paid to the influence of biodegradation to improve the prosthesis’s service life in the complex environment of the oral cavity.

Interfacial Biomaterial-Dentin Bacterial Biofilm Proliferation and Viability Is Affected by the Material, Aging Media and Period

Biomaterial−dentin interfaces undergo degradation over time, allowing salivary, tissue fluid, and bacterial movement between the root filling or restoration and dentin. This study aims to investigate the effect of aging in simulated human salivary/bacterial/blood esterases (SHSE) on proliferation and viability of Enterococcus faecalis biofilm within the dentin interface with four materials used to fill/restore the endodontic space. Root canals of human anterior teeth were prepared and filled with gutta-percha and one of the following: self-cured resin composite (BisfilTM 2B, Bisco, Schaumburg, IL, USA) with either self-etch (SE) (EasyBond) or total-etch (TE) (ScotchbondTM, 3M, Saint Paul, MN, USA) methacrylate-based adhesives, epoxy-resin sealer (AH Plus®, Dentsply Sirona, York, PA, USA), or bioceramic sealer (EndoSequence® BC Sealer™, Brasseler USA, Savannah, GA, USA). Specimens were aged in SHSE or phosphate-buffered saline (PBS) for up to 360 days, followed by cultivation of steady-state E. faecalis biofilm. Depth and viability of interfacial bacterial biofilm proliferation were assessed by confocal laser scanning microscopy and live/dead staining. Data were analyzed using three-way ANOVA and Scheffe’s post hoc analyses. Initial depths of biofilm proliferation were similar among material groups (p > 0.05). All groups showed significantly deeper biofilm proliferation with increased aging period (p < 0.05). SHSE aging increased interfacial biofilm depth for TE, SE and BC (p < 0.05) but not AH. For unaged interfaces, BC exhibited the lowest ratio of live bacteria, followed by AH, TE, and SE (p < 0.05). Interfacial bacterial biofilm proliferation and viability were dependent on the biomaterial, aging media, and period.

Simulating the Intraoral Aging of Dental Bonding Agents: A Narrative Review

Despite their popularity, resin composite restorations fail earlier and at higher rates than comparable amalgam restorations. One of the reasons for these rates of failure are the properties of current dental bonding agents. Modern bonding agents are vulnerable to gradual chemical and mechanical degradation from a number of avenues such as daily use in chewing, catalytic hydrolysis facilitated by salivary or bacterial enzymes, and thermal fluctuations. These stressors have been found to work synergistically, all contributing to the deterioration and eventual failure of the hybrid layer. Due to the expense and difficulty in conducting in vivo experiments, in vitro protocols meant to accurately simulate the oral environment’s stressors are important in the development of bonding agents and materials that are more resistant to these processes of degradation. This narrative review serves to summarize the currently employed methods of aging dental materials and critically appraise them in the context of our knowledge of the oral environment’s parameters.

Minimally Invasive Therapies for the Management of Dental Caries—A Literature Review

In recent years, due to a better understanding of the caries pathology and advances in dental materials, the utilization of non-invasive and minimally invasive techniques that delay/obviate the need for traditional restorations has started gaining momentum. This literature review focuses on some of these approaches, including fluoride varnish, silver diamine fluoride, resin sealants, resin infiltration, chemomechanical caries removal and atraumatic restorative treatment, in the context of their chemistries, indications for use, clinical efficacy, factors determining efficacy and limitations. Additionally, we discuss strategies currently being explored to enhance the antimicrobial properties of these treatment modalities to expand the scope of their application.

A novel methacrylate derivative polymer that resists bacterial cell-mediated biodegradation

This study tests biodegradation resistance of a custom synthesized novel ethylene glycol ethyl methacrylate (EGEMA) with ester bond linkages that are external to the central polymer backbone when polymerized. Ethylene glycol dimethacrylate (EGDMA) with internal ester bond linkages and EGEMA discs were prepared in a polytetrafluoroethylene (PTFE) mold using 40 μl macromer and photo/co-initiator mixture cured for 40 s at 1000 mW/cm² . The discs were stored in the constant presence of Streptococcus mutans (S. mutans) in Todd Hewitt Yeast + Glucose (THYE+G) media up to 9 weeks (n = 8 for each macromer type) and physical/mechanical properties were assessed. Initial measurements EGEMA versus EGDMA polymer discs showed equivalent degree of conversion (45.69% ± 2.38 vs. 46.79% ± 4.64), diametral tensile stress (DTS; 8.12± 2.92 MPa vs. 6.02 ± 1.48 MPa), and low subsurface optical defects (0.41% ± 0.254% vs. 0.11% ± 0.074%). The initial surface wettability (contact angle) was slightly higher (p ≤ .012) for EGEMA (62.02° ± 3.56) than EGDMA (53.86° ± 5.61°). EGDMA showed higher initial Vicker's hardness than EGEMA (8.03 ± 0.88 HV vs. 5.93 ± 0.69 HV; p ≤ .001). After 9 weeks of S. mutans exposure, EGEMA (ΔDTS-1.30 MPa) showed higher resistance to biodegradation effects with a superior DTS than EGDMA (ΔDTS-6.39 MPa) (p = .0039). Visible and scanning electron microscopy images of EGEMA show less surface cracking and defects than EGDMA. EGDMA had higher loss of material (18.9% vs. 8.5%, p = .0009), relative changes to fracture toughness (92.5% vs. 49.2%, p = .0022) and increased water sorption (6.1% vs. 1.9%, p = .0022) compared to EGEMA discs. The flipped external ester group linkage design is attributed to EGEMA showing higher resistance to bacterial degradation effects than an internal ester group linkage design methacrylate.

Phosphate Ion Release and Alkalizing Potential of Three Bioactive Dental Materials in Comparison with Composite Resin

Aim

Several new bioactive compounds were recently introduced to the market with favorable ion release, tooth remineralization, and alkalizing potential. This study sought to compare the phosphate ion release and alkalizing potential of three bioactive materials in comparison with composite resin.

Methods

Thirty-six discs (2 × 6 mm) were fabricated from Fuji II LC resin modified glass ionomer (RMGI), Activa BioActive, Cention N, and Z250 composite in plastic molds. The specimens were stored in distilled water for 24 and 48 h and 6 months. Half of the specimens were used to assess the phosphate ion release while the other half were used to assess the alkalizing potential 1 h after pH drop from 6.8 to 4. Phosphate ion release was quantified by a spectrophotometer while the pH value was measured by a pH meter. Data were analyzed using two-way ANOVA, one-way ANOVA, and Tukey's HSD test (for pairwise comparisons) at 0.05 level of significance.

Results

At 24 h, the maximum phosphate ion release in distilled water occurred in the Fuji II LC group followed by Cention N, Activa BioActive, and Z250. At 6 months, Cention N followed by Activa BioActive showed higher phosphate ion release than Fuji II LC and Z250. No significant difference was noted between Activa BioActive and Cention N at any time point. All materials, except for Z250, increased the pH of the environment. Fuji II LC had maximum alkalizing effect at all time points followed by Cention N and Activa BioActive.

Conclusion

Use of bioactive compounds is a promising method to ensure phosphate ion release, and can have a positive effect on tooth remineralization over time. Also, bioactive compounds can alkalize an acidic environment.

Characteristics of biofilm-induced degradation at resin-dentin interfaces using multiple combinations of adhesives and resins

OBJECTIVE

We aimed to evaluate morphological, mechanical and chemical characteristics at resin-dentin interfaces using multiple combinations of adhesives and resins after a short-term biofilm-induced degradation.

METHODS

Cervical cavities were prepared in bovine incisors, treated by Clearfil SE Bond 2 (SE) or FL-Bond II (FL), restored by Clearfil Majesty ES Flow (ES) or Beautifil Flow Plus (BFP) and grouped into SE-ES, SE-BFP, FL-ES and FL-BFP. After biofilm challenge, interfacial gaps and dentin wall lesions were examined by optical coherence tomography (OCT). Gap depth (GD), gap pattern scale (GPS) and dentin wall lesion depth (WLD) were evaluated from confocal laser scanning microscope. Microhardness of dentin lesions was measured with a Vickers microhardness tester. Chemical elements in resins and dentin wall lesions were analyzed by scanning electron microscopy and energy dispersive X-ray spectrometry (SEM/EDS). Morphological structures of interfacial gaps were observed by SEM.

RESULTS

OCT could detect adhesive-dentin-bonded and adhesive-dentin-debonded gaps. SE-containing groups showed significantly lower GPS than FL-containing groups. FL-BFP showed significantly lower WLD than FL-ES. Microhardness of dentin wall lesions was higher than that of outer lesions and they showed significant differences in FL-BFP. SE-BFP showed a lower GPS curve and higher intensities of Ca and P in the upper half of dentin wall lesions than other groups. From SEM, microgaps between filler and matrix, break and loss of matrix, separation of adhesive matrix with hybrid layer occurred at interfacial gaps.

SIGNIFICANCE

The morphological, mechanical and chemical characteristics of resin-dentin interfacial degradation depend on the component and chemistry of restorative materials.

Metaproteome and metabolome of oral microbial communities

The emergence of high-throughput technologies for the comprehensive measurement of biomolecules, also referred to as "omics" technologies, has helped us gather "big data" and characterize microbial communities. In this article, we focus on metaproteomic and metabolomic approaches that support hypothesis-driven investigations on various oral biologic samples. Proteomics reveals the working units of the oral milieu and metabolomics unveils the reactions taking place; and so these complementary techniques can unravel the functionality and underlying regulatory processes within various oral microbial communities. Current knowledge of the proteomic interplay and metabolic interactions of microorganisms within oral biofilm and salivary microbiome communities is presented and discussed, from both clinical and basic research perspectives. Communities indicative of, or from, health, caries, periodontal diseases, and endodontic lesions are represented. Challenges, future prospects, and examples of best practice are given.

A Novel Dental Polymer with a Flipped External Ester Group Design that Resists Degradation via Polymer Backbone Preservation

Current dental sealants with methacrylate based chemistry are prone to hydrolytic degradation. A conventional ethylene glycol dimethacrylate (EGDMA) was compared to a novel methacrylate monomer with a flipped external ester group (ethylene glycol ethyl methacrylate - EGEMA) that was designed to resist polymer degradation effects. Fourier transform infrared spectroscopy and water contact angle confirmed a comparable degree of initial conversion and surface wettability for EGDMA and EGEMA. EGDMA disks initially performed better compared to EGEMA as suggested by higher surface hardness and 1.5 times higher diametral tensile strength (DTS). After 15 weeks of hydrolytic and accelerated aging, EGDMA and EGEMA DTS was reduced by 88% and 44% respectively. This accelerated aging model resulted in 3.3 times higher water sorption for EDGMA than EGEMA disks. EGDMA had an increase in grain boundary defects and visible erosion sites with accelerated aging, while for EGEMA the changes were not significant.

Interaction between the Oral Microbiome and Dental Composite Biomaterials: Where We Are and Where We Should Go

Dental composites are routinely placed as part of tooth restoration procedures. The integrity of the restoration is constantly challenged by the metabolic activities of the oral microbiome. This activity directly contributes to a less-than-desirable half-life for the dental composite formulations currently in use. Therefore, many new antimicrobial dental composites are being developed to counteract the microbial challenge. To ensure that these materials will resist microbiome-derived degradation, the model systems used for testing antimicrobial activities should be relevant to the in vivo environment. Here, we summarize the key steps in oral microbial colonization that should be considered in clinically relevant model systems. Oral microbial colonization is a clearly defined developmental process that starts with the formation of the acquired salivary pellicle on the tooth surface, a conditioned film that provides the critical attachment sites for the initial colonizers. Further development includes the integration of additional species and the formation of a diverse, polymicrobial mature biofilm. Biofilm development is discussed in the context of dental composites, and recent research is highlighted regarding the effect of antimicrobial composites on the composition of the oral microbiome. Future challenges are addressed, including the potential of antimicrobial resistance development and how this could be counteracted by detailed studies of microbiome composition and gene expression on dental composites. Ultimately, progress in this area will require interdisciplinary approaches to effectively mitigate the inevitable challenges that arise as new experimental bioactive composites are evaluated for potential clinical efficacy. Success in this area could have the added benefit of inspiring other fields in medically relevant materials research, since microbial colonization of medical implants and devices is a ubiquitous problem in the field.

Antimicrobial Effect of a Peptide Containing Novel Oral Spray on Streptococcus mutans

Objective

To investigate the antibacterial effect of a novel antimicrobial peptide containing oral spray GERM CLEAN on Streptococcus mutans (S. mutans) in vitro and further explore the related mechanisms at phenotypic and transcriptional levels.

Methods

The disk diffusion method was used to preliminarily appraise the antimicrobial effect of GERM CLEAN. The minimal inhibitory concentration (MIC) of GREM CLEAN towards S. mutans was determined by the broth dilution method. S. mutans was determined by the broth dilution method.

Results

The diameter (10.18 ± 1.744 mm) of inhibition zones formed by GERM CLEAN preliminarily indicated its inhibitory effect on the major cariogenic bacteria S. mutans was determined by the broth dilution method. S. mutans was determined by the broth dilution method. S. mutans was determined by the broth dilution method. S. mutans was determined by the broth dilution method. gtfB, gtfC, gtfD, and ldh were significantly repressed by treating with GERM CLEAN, and this was consistent with our phenotypic results.

Conclusion

The novel antimicrobial peptide containing oral spray GERM CLEAN has an anti-Streptococcus mutans effect and the inhibitory property may be due to suppression of the virulence factors of S. mutans including adhesive, acidogenicity, EPS, and biofilm formation.Streptococcus mutans effect and the inhibitory property may be due to suppression of the virulence factors of S. mutans including adhesive, acidogenicity, EPS, and biofilm formation.S. mutans was determined by the broth dilution method.

Surface properties and bacterial adhesion of bulk-fill composite resins

OBJECTIVES

The aim of the present study was to evaluate the Streptococcus mutans and Streptococcus mitis adhesion and related surface properties of bulk-fill resin composite.

METHODS

Four novel bulk-fill composite with different composition were used; Sonic Fill-2 (KSF), Filtek BulkFill (FBF), Admira Fusion X-tra (AFX), Beautifil Bulk Restorative (SBB) and a control group (glass) were included in the study. After standardized surface polishing procedure, surface properties of composite specimens were evaluated using surface roughness (SR) measurements by a profilometer, hydrophobicity and surface free energy (SFE) analyses, elemental and topographic analyses by SEM-EDS. To evaluate the bacterial adhesion, composite specimens were immersed in artificial saliva and mucin for pellicle development. After 1-h immersion, bacterial suspension was added to the pellicle-coated specimens, which were incubated at 37 °C in 5% CO₂ atmosphere for 24 h. Adhered bacteria counts were determined as x10⁸ Cfu/ml. Bacterial adhesion was also investigated using confocal laser scanning microscopy.

RESULTS

No statistically significant differences were found among bulk fill composites in terms of surface roughness while glass showed the lowest Ra values. The lowest contact angle values were found in the control group and Sonic Fill-2 while the highest SFE values were observed in these materials. No statistically significant differences were found between the S. mutans counts. For S. Mitis adhesion, the highest value was found in Sonic Fill-2 and no significant differences were observed between the other groups.

CONCLUSIONS

SR of bulk-fill composite resins had no effect on bacterial adhesion. However, bacterial adhesion increased with higher SFE values.

CLINICAL SIGNIFICANCE

Although the surface roughness of composites used in the study is similar, in clinically, S. mitis adhesion may be more in the KSF group because of high surface free energy.

Ex vivo investigation on internal tunnel approach/internal resin infiltration and external nanosilver-modified resin infiltration of proximal caries exceeding into dentin

This ex vivo proof-of-concept study aimed to investigate the effect of nanosilver particles (AgNP) added to a conventional infiltrant resin (Icon) on external penetration into natural proximal enamel caries exceeding into dentin after internal tunnel preparation and internal infiltration. Carious lesions (ICDAS codes 2/3) of extracted human (pre-)molars revealing proximal caries radiographically exceeding into dentin (E2/D1 lesions) were preselected. Then, 48 of those specimens showing demineralized areas transcending the enamel-dentin border as assessed by means of near-infrared light transillumination (DIAGNOcam) were deproteinized (NaOCl, 5%). Using an internal tunnel approach, occlusal cavities central to the marginal ridge were prepared. Excavation of carious dentin, total etch procedure (H3PO4, 40%), and internal resin infiltration (FITC-labeled) followed, along with final restorations (flowable composite resin). Outer lesion surfaces were etched (HCl, 15%) prior to external infiltration (RITC-labeled). Group 1 (control; n = 24) used non-modified infiltrant, while an infiltrant/AgNP mixture (20 nm; 5.5 wt%) was used with experimental Group 2 (n = 24). Non-infiltrated pores of cut lesions were stained (Berberine), and specimens were analyzed using confocal laser scanning microscopy. Compared to the non-filled infiltrant, incorporation of AgNP had no effect on the resin's external penetration. Between the groups, no significant differences regarding internal or external infiltration could be detected, and non-infiltrated lesion areas did not differ significantly (p>0.109; t-test). The internal tunnel preparation in combination with both an internal resin infiltration and an additional external infiltration approach using a nanosilver-modified infiltrant resin leads to increased infiltrated lesion areas, thus occluding and adhesively stabilizing the porous volume of the demineralized enamel. While exerting antimicrobial effects by the nanosilver particles, this approach should have the potential as a viable treatment alternative for proximal lesions extending into dentin, thus avoiding the sacrifice of sound enamel, postponing the frequently inevitable restoration/re-restoration cycle of conventional proximal caries treatment, and improving dental health.

Esterases affect the physical properties of materials used to seal the endodontic space

Materials used to seal the endodontic space are subjected to enzymatic degradative activities of body fluids and bacteria.

OBJECTIVES

To assess effects of simulated human salivary, blood and bacterial esterases (SHSE) on physical properties of typical restorative material and root canal sealers.

METHODS

Specimens of set methacrylate-based resin composite (BisfilTM2B; RC), calcium-silicate sealer (EndoSequence®; BC) or epoxy-resin sealer (AH-Plus®; ER) were tested after up to 28Days exposure to phosphate buffered saline (PBS) or SHSE, using ANSI/ADA-57:2000 and ISO-6876:2012.

RESULTS

Regardless of media, microhardness increased with time for BC remained unchanged for ER and decreased for RC (p < 0.05). SHSE moderated the increase for BC compared to PBS (28.0 ± 4.8 vs. 38.1 ± 7.9 KHN) at 7Days, and enhanced the decrease for RC at 7Days (55.6 ± 7.1 vs. 66.3 ± 6.5 KHN) and 28Days (52.3 ± 9.2 vs. 62.6 ± 8.5 KHN). Compressive strength was enhanced only for BC by either media. BC expanded with time for both incubation conditions; SHSE moderated the expansion compared to PBS at 7Days (0.026 ± 0.01% vs. 0.049 ± 0.007%). Shrinkage of ER was similar for both incubation media and was lower than that for RC (p < 0.05). Shrinkage of RC was enhanced by SHSE compared to PBS at 7Days (0.5 ± 0.07% vs. 0.38 ± 0.08%). Weight loss was lowest for ER and highest for BC (p < 0.05). It was enhanced by SHSE compared to PBS for BC at 28Days (2.40 ± 0.2 vs. 2.96 ± 0.19 W L%), and for RC at 7Days (0.54 ± 0.09 vs. 0.80 ± 0.1 W L%).

SIGNIFICANCE

Simulated body fluids and bacterial esterases affected the physical properties of test materials, suggesting potential impacts on sealing ability and resistance to bacterial ingress, and tooth strength ultimately affecting their clinical performance.

Toward dental caries: Exploring nanoparticle-based platforms and calcium phosphate compounds for dental restorative materials

Millions of people worldwide suffer from a toothache due to tooth cavity, and often permanent tooth loss. Dental caries, also known as tooth decay, is a biofilm-dependent infectious disease that damages teeth by minerals loss and presents a high incidence of clinical restorative polymeric fillings (tooth colored fillings). Until now, restorative polymeric fillings present no bioactivity. The complexity of oral biofilms contributes to the difficulty in developing effective novel dental materials. Nanotechnology has been explored in the development of bioactive dental materials to reduce or modulate the activities of caries-related bacteria. Nano-structured platforms based on calcium phosphate and metallic particles have advanced to impart an anti-caries potential to restorative materials. The bioactivity of these platforms induces prevention of mineral loss of the hard tooth structure and antibacterial activities against caries-related pathogens. It has been suggested that this bioactivity could minimize the incidence of caries around restorations (CARS) and increase the longevity of such filling materials. The last few years witnessed growing numbers of studies on the preparation evaluations of these novel materials. Herein, the caries disease process and the role of pathogenic caries-related biofilm, the increasing incidence of CARS, and the recent efforts employed for incorporation of bioactive nanoparticles in restorative polymer materials as useful strategies for prevention and management of caries-related-bacteria are discussed. We highlight the status of the most advanced and widely explored interaction of nanoparticle-based platforms and calcium phosphate compounds with an eye toward translating the potential of these approaches to the dental clinical reality.

•

Current progress and future applications of functional nanoparticles and remineralizing compounds incorporated in dental direct restorative materials.

•

Overview of the antibacterial and remineralizing mechanisms presenting direct and indirect implications on the tooth mineral loss.

•

These investigations, although in the initial phase of evidence are necessary and their results are encouraging and open the doors to future clinical studies that will allow the therapeutic value of nanotechnology-based restorative materials to be established.

Identification and Functional Characterization of Anti-metastasis and Anti-angiogenic Activities of Triethylene Glycol Derivatives

We had previously reported anticancer activity in the water extract (WEX) of Ashwagandha leaves, and identified Triethylene glycol (TEG) as an active tumor suppressor component. In this study, we investigated anti-migratory and anti-angiogenesis activities of WEX and TEG. We conducted in vitro and in vivo experiments using TEG, and its two derivatives, Triethyleneglycol dimethacrylate (TD-10), and Tetraethyleneglycol dimethacrylate (TD-11). The data revealed strong anticancer and anti-metastasis potentials in the derivatives. Non-toxic, anti-migratory doses of the derivatives showed inhibition of canonical Wnt/β-catenin axis and consequent downregulation of EMT-signaling proteins (Vimentin, MMPs and VEGF). These results endorse that the TD-10 and TD-11 have potential to safely put a check on the aggressiveness of the metastatic cells and therefore represent promising candidates for the treatment of metastatic cancers.

Human In Situ Study of the effect of Bis(2-Methacryloyloxyethyl) Dimethylammonium Bromide Immobilized in Dental Composite on Controlling Mature Cariogenic Biofilm

Cariogenic oral biofilms cause recurrent dental caries around composite restorations, resulting in unprosperous oral health and expensive restorative treatment. Quaternary ammonium monomers that can be copolymerized with dental resin systems have been explored for the modulation of dental plaque biofilm growth over dental composite surfaces. Here, for the first time, we investigated the effect of bis(2-methacryloyloxyethyl) dimethylammonium bromide (QADM) on human overlying mature oral biofilms grown intra-orally in human participants for 7⁻14 days. Seventeen volunteers wore palatal devices containing composite specimens containing 10% by mass of QADM or a control composite without QADM. After 7 and 14 days, the adherent biofilms were collected to determine bacterial counts via colony-forming unit (CFU) counts. Biofilm viability, chronological changes, and percentage coverage were also determined through live/dead staining. QADM composites caused a significant inhibition of Streptococcus mutans biofilm formation for up to seven days. No difference in the CFU values were found for the 14-day period. Our findings suggest that: (1) QADM composites were successful in inhibiting 1⁻3-day biofilms in the oral environment in vivo; (2) QADM significantly reduced the portion of the S. mutans group; and (3) stronger antibiofilm activity is required for the control of mature long-term cariogenic biofilms. Contact-killing strategies using dental materials aimed at preventing or at least reducing high numbers of cariogenic bacteria seem to be a promising approach in patients at high risk of the recurrence of dental caries around composites.

Gene expression and protein synthesis of esterase from Streptococcus mutans are affected by biodegradation by-product from methacrylate resin composites and adhesives

An esterase from S. mutans UA159, SMU_118c, was shown to hydrolyze methacrylate resin-based dental monomers.

OBJECTIVE

To investigate the association of SMU_118c to the whole cellular hydrolytic activity of S. mutans toward polymerized resin composites, and to examine how the bacterium adapts its hydrolytic activity in response to environmental stresses triggered by the presence of a resin composites and adhesives biodegradation by-product (BBP).

MATERIALS AND METHODS

Biofilms of S. mutans UA159 parent wild strain, SMU_118c knockout strain (ΔSMU_118c), and SMU_118c complemented strain (ΔSMU_118cC) were incubated with photo-polymerized resin composite. High performance liquid chromatography was used to quantify the amount of a universal 2,2-Bis[4-(2-hydroxy-3-methacryloxypropoxy)phenyl]propane (bisGMA)-derived BBP, bishydroxy-propoxy-phenyl-propane (bisHPPP) in the media. Fluorescence in situ hybridization (FISH) and quantitative proteomic analysis were used to measure SMU_118c gene expression and production of SMU_118c protein, respectively, from biofilms of S. mutans UA159 wild strain that were cultured with bisHPPP.

RESULTS

The levels of bisHPPP released from composite were similar for ΔSMU_118c and media control, and these were significantly lower compared to the parent wild-strain UA159 and complemented strain (ΔSMU_118cC) (p < 0.05). Gene expression of SMU_118c and productions of SMU_118c protein were higher for bisHPPP incubated biofilms (p < 0.05).

SIGNIFICANCE

This study suggests that SMU_118c is a dominant esterase in S. mutans and capable of catalyzing the hydrolysis of the resinous matrix of polymerized composites and adhesives. In turn, the bacterial response to BBP was to increase the expression of the esterase gene and enhance esterase production, potentially accelerating the biodegradation of the restoration, adhesive and restoration-tooth interface, ultimately contributing to premature restoration failure.

STATEMENT OF SIGNIFICANCE

We recently reported (Huang et al., 2018) on the isolation and initial characterization of a specific esterase (SMU_118c) from S. mutans that show degradative activity toward the hydrolysis of dental monomers. The current study further characterize this enzyme and shows that SMU_118c is a dominant degradative esterase activity in the cariogenic bacterium S. mutans and is capable of catalyzing the hydrolysis of the resinous matrix of polymerized composites and adhesives. In turn, the bacterial response to biodegradation by-products from composites and adhesives was to increase the expression of the esterase gene and enhance esterase production, accelerating the biodegradation of the restoration, adhesive and the restoration-tooth interface, potentially contributing to the pathogenesis of recurrent caries around resin composite restorations.

Biostable, antidegradative and antimicrobial restorative systems based on host-biomaterials and microbial interactions

OBJECTIVES

Despite decades of development and their status as the restorative material of choice for dentists, resin composite restoratives and adhesives exhibit a number of shortcomings that limit their long-term survival in the oral cavity. Herein we review past and current work to understand these challenges and approaches to improve dental materials and extend restoration service life.

METHODS

Peer-reviewed work from a number of researchers as well as our own are summarized and analyzed. We also include yet-unpublished work of our own. Challenges to dental materials, methods to assess new materials, and recent material improvements and research directions are presented.

RESULTS

Mechanical stress, host- and bacterial-biodegradation, and secondary caries formation all contribute to restoration failure. In particular, several host- and bacterial-derived enzymes degrade the resin and collagen components of the hybrid layer, expanding the marginal gap and increasing access to bacteria and saliva. Furthermore, the virulence of cariogenic bacteria is up-regulated by resin biodegradation by-products, creating a positive feedback loop that increases biodegradation. These factors work synergistically to degrade the restoration margin, leading to secondary caries and restoration failure. Significant progress has been made to produce hydrolytically stable resins to resist biodegradation, as well as antimicrobial materials to reduce bacterial load around the restoration. Ideally, these two approaches should be combined in a holistic approach to restoration preservation.

SIGNIFICANCE

The oral cavity is a complex environment that poses an array of challenges to long-term material success; materials testing conditions should be comprehensive and closely mimic pathogenic oral conditions.

Responsive antimicrobial dental adhesive based on drug-silica co-assembled particles

Most dental resin composite restorations are replacements for failing restorations. Degradation of the restoration-tooth margins by cariogenic bacteria results in recurrent caries, a leading cause for restoration failure. Incorporating antimicrobial agents in dental adhesives could reduce interfacial bacterial count and reduce recurrent caries rates, inhibit interfacial degradation, and prolong restoration service life, while minimizing systemic exposure. Direct addition of antimicrobial compounds into restorative materials have limited release periods and could affect the integrity of the material. Attempts to incorporate antimicrobial within mesoporous silica nanoparticles showed theoretical promise due to their physical robustness and large available internal volume, yet yielded short-term burst release and limited therapeutic payload. We have developed novel broad-spectrum antimicrobial drug-silica particles co-assembled for long-term release and high payload incorporated into dental adhesives. The release of the drug, octenidine dihydrochloride, is modulated by the oral degradative environment and mathematically modeled to predict effective service life. Steady-state release kills cariogenic bacteria, preventing biofilm formation over the adhesive surface, with no toxicity. This novel material could extend dental restoration service life and may be applied to other long-term medical device-tissue interfaces for responsive drug release upon bacterial infection.

STATEMENT OF SIGNIFICANCE

This study describes a novel dental adhesive that includes a broad-spectrum antimicrobial drug-silica co-assembled particles for long-term antimicrobial effect. The release of the drug, octenidine dihydrochloride, is modulated by the oral degradative environment and mathematically modeled to predict effective release throughout the service life of the restoration. Steady-state drug-release kills caries-forming bacteria, preventing biofilm formation over the adhesive surface, without toxicity. This novel material could extend dental restoration service life and may be applied to other long-term medical device-tissue interfaces for responsive drug release upon bacterial infection. Since recurrent cavities (caries) caused by bacteria are the major reason for dental filling failure, this development represents a significant contribution to the biomaterials field in methodology and material performance.

Environmental proteomic studies: closer step to understand bacterial biofilms

Advancement in proteome analytical techniques and the development of protein databases have been helping to understand the physiology and subtle molecular mechanisms behind biofilm formation in bacteria. This review is to highlight how the evolving proteomic approaches have revealed fundamental molecular processes underlying the formation and regulation of bacterial biofilms. Based on the survey of research reports available on differential expression of proteins in biofilms of bacterial from wide range of environments, four important cellular processes viz. metabolism, motility, transport and stress response that contribute to formation of bacterial biofilms are discussed. This review might answer how proteins related to these cellular processes contribute significantly in stabilizing biofilms of different bacteria in diverse environmental conditions.

Esterase from a cariogenic bacterium hydrolyzes dental resins

OBJECTIVES

To identify and characterize specific esterases from S. mutans with degradative activity toward methacrylate-based resin monomers.

METHODS

Out of several putative esterases, an esterase encoded in an Open Reading Frame as SMU_118c (The National Center for Biotechnology Information, NCBI), was found to have true hydrolase activities. SMU_118c was cloned, expressed, purified and further characterized for its respective hydrolytic activity towards ester-containing nitrophenyl substrates and the universal resin monomers bis-phenyl-glycidyl-dimethacrylate (bisGMA) and triethyleneglycol dimethacrylate (TEGDMA) at neutral (7.0) or cariogenic (5.5) pH. Mass spectrometry (MS) was used to verify the expression of SMU_118c protein in S. mutans UA159.

RESULTS

Similar to the whole cell activity of S. mutans, SMU_118c showed the highest affinity toward para-nitrophenyl acetate (pNPA) and para-nitrophenyl butyrate (pNPB) vs. ortho-nitrophenyl butyrate (oNPB) and butyrylthiocholine iodide (BTC) (p < 0.05). The esterase retained 60% of its activity after 21 days and hydrolyzed bisGMA at a higher rate than TEGDMA at both neutral and cariogenic pH (p < 0.001), similarly to the predominant human salivary esterase degradative activity. MS confirmed that SMU_118c is an intracellular protein in S. mutans UA159 and expressed under pathogenic (pH 5.5) growth conditions.

SIGNIFICANCE

The similarity in the activity profile to the whole S. mutans bacterial cell, the stability over time at cariogenic pH, the preference to hydrolyze bisGMA and confirmed expression profile suggest that SMU_118c could be a significant contributor to the whole bacterial degradative activity of S. mutans toward the degradation of resin composites, adhesives and the restoration-tooth interface, potentially accelerating restoration's failure.

STATEMENT OF SIGNIFICANCE

The current study builds upon our highly-cited previous study by Bourbia et al., (JDR, 2013) that reported on that the cariogenic bacterium, S. mutans has esterase-like activities that enable the bacterium to degrade dental composites and adhesives. The current submission is the first to report on the isolation and characterization of the specific esterase activity (SMU_118c) from S. mutans that is a significant contributor to the whole bacterial degradative activity toward the hydrolysis of dental resins. This activity compromises the restoration-tooth interface, increases interfacial bacterial microleakage (Kermanshahi et al., JDR 2010), potentially contributing to the pathogenesis of recurrent caries around resin composite restorations. This represent a significant contribution to the field of biomaterials and their clinical performance.