Wastewater treatment alters microbial colonization of microplastics

From wastewater to sludge: The role of microplastics in shaping anaerobic digestion performance and antibiotic resistance gene dynamics

The presence of microplastics (MPs) in wastewater treatment plants (WWTPs) disrupt processes and threaten the effectiveness of anaerobic digestion (AD), raising critical environmental and operational concerns. This review assesses MP occurrence in WWTPs and its effects on biogas production and the fate of antibiotic resistance genes (ARGs) during AD to understand their impact on process efficiency and environmental health. Polypropylene (PP) and polyethylene (PE) are the most prevalent types of MPs which are found in WWTP influent at an average concentration of 801.5 particles per liter (P/L), decrease to 38.3 P/L in effluent, and accumulate in sludge at 70.5 P/L. The effect of MPs on AD performance is influenced by MP type, concentration, size, and AD conditions (i.e., feed substrate, reactor configuration, temperature, and incubation time). For example, certain MPs (polyamide 7 (PA7) and PP) increase methane production by 39.5 %, while aged MPs decrease it by 47.2 %. The review also explores how AD drives MP degradation mechanisms like oxidation, hydrolysis, mechanical stress, and biodegradation. Additionally, MPs significantly impact ARGs, with abundance increasing by 0.4-514.4 %, especially with aged MPs. Mechanistic effects of MPs on ARGs dissemination were also discussed, including horizontal gene transfer (reactive oxygen species production, cell membrane permeability, extracellular polymeric substances secretion, and ATP dynamics), vertical gene transfer, microbial community, and adsorbing pollutants. This analysis provides insights into the complex interactions between MPs, microbial processes, and ARGs, highlighting their implications for wastewater treatment and biogas production systems.

Visible light photosensitised cross-flow microfiltration membrane reactors for managing microplastic-contaminated bio-effluents

The demand for advanced water treatment solutions necessitates the development of multifunctional, photodynamically active membranes. Phthalocyanines (Pcs), a class of organic photosensitizers, offer significant potential for enhancing treatment efficacy through photodynamic activity. This study reports the development of Pc-modified polymeric microfiltration membranes as visible-light-responsive, multifunctional membrane reactors with enhanced photodynamic and filtration properties. Cobalt phthalocyanine (CoPc), zinc phthalocyanine (ZnPc), tetra-amino zinc phthalocyanine (TAZnPc), and tetra-sulfonated aluminum phthalocyanine (TSAlPc) were integrated into the membranes, imparting notable changes in morphology, surface wettability, and chemical functionality. Characterization revealed improvements in optical responsiveness and surface properties that contributed to robust photodynamic and filtration performance. Static photodynamic evaluations demonstrated high efficacy, with ZnPc mixed matrix membrane (MMM) achieving superior dye degradation and TSAlPc grafted membrane (GM) yielding significant bacterial inactivation. Filtration trials confirmed ZnPc MMM's biofouling resistance and permeance stability, reaching 99.97 % rejection of bio-fouled microplastics (MPs) and a 45 % permeance enhancement under irradiation. Virus filtration results demonstrated TSAlPc MMM's viral retention efficacy, achieving a 2.05-log reduction against Influenza A virus. These findings underscore the potential of Pc-functionalized membranes as promising candidates for advanced water treatment applications, offering robust contaminant rejection, biofouling control, and broad-spectrum antimicrobial efficacy in a single, multifunctional platform.

Plastic degradation in Lake Geneva: Influence of depth, seasonal shifts, and bacterial community dynamics

Aquatic ecosystems suffer disproportionately from plastic pollution given that they integrate material from terrestrial watersheds. Most studies on microbial colonisation and degradation of plastics have focused on marine environments, leaving a knowledge gap for freshwaters. Our study explores the possible degradation and the role of bacterial community composition of plastics in Lake Geneva. We exposed polyethylene terephthalate (PET) and low-density polyethylene (LDPE) for 45 weeks to environmental lake gradients that change with depth and season. The substrates were suspended at 2 and 30 m depth, resulting in strikingly different environmental conditions for biofilm development, including light (PAR), temperature, and nutrient availability. We monitored the bacterial colonisation using 16S rRNA sequencing and assessed the abundance of the alkane hydrolase gene (alkB) to evaluate the potential ability of the biofilm to degrade PET and LDPE. Additionally, we analysed plastic surface modifications through spectroscopy, contact angle measurements and microscopy. We found that the PET surface showed no degradation after 45 weeks in the lake, at either depth. The LDPE surface at 2 m exhibited a decrease in hydrophobicity, but no evidence of oxidation or degradation was found. In contrast, the LDPE surface at 30 m displayed oxidation, a decrease in hydrophobicity, and porous cavities. In addition, we observed an increase in the alkane alkB gene abundance in the biofilm, with the development of plastic-degrading taxa in the community. Our results underline the complexity of plastic degradation in aquatic ecosystems; not only does the type of plastic have an effect, so do the spatio-temporal variable environmental lake conditions and the biofilm community. The multifactorial nature of these processes complicates predictions on the fate of plastics in the environment.

Microbial composition on microplastics mediated by stream impairment

BACKGROUND

Studies into biofilm interactions with microplastic polymers in marine environments are widespread in the literature. Increasing evidence suggests that lotic microplastics are a significant contributor and may accumulate harmful or pathogenic organisms, thereby contributing to the degradation of marine ecosystems where they meet riverine systems. Suboptimal water quality of these riverine systems may influence these biomes. This project compared the microbial diversity of biofilms that developed on microplastics to natural stone substrates in an impaired and unimpaired section of the Quinnipiac River Watershed. In this project, the influence of impairment was studied based on microbial diversity via 16S rRNA gene sequencing while monitoring total colony and fecal coliform colony counts using standard water sampling methods.

RESULTS

Total coliform colony counts were greater in the impaired Quinnipiac River site than in the unimpaired Honeypot Brook tributary and on the microplastic substrate than the stone substrate. Sequenced features to the class level were dominated by Alphaproteobacteria, Betaproteobacteria, and Gammaproteobacteria, comprising 75% of the community biome. Simpson's Diversity indices indicated that within the two substrates, there was little variation between the communities. However, it was noted that microplastic alpha diversity trended slightly lower than the stone. Further analysis of common aquatic enteropathogens showed that the genus Citrobacter was significantly more abundant on the microplastics at both locations.

CONCLUSIONS

Our results indicate impaired waterbodies with a microplastic burden may retain greater fecal coliform bacterial loads than unimpaired waterbodies. Increased microplastic loads in compromised lotic systems may have an additive impact. Water quality remediation and careful monitoring are recommended to reduce this effect. Comparing this study with environmental community analysis could provide valuable insight into preferential surface attachment of bacteria onto microplastic.

Wastewater surveillance to assess cocaine and methylenedioxymethamphetamine use trends during a major music festival in Brazil

Wastewater-based epidemiology was applied in northeastern Brazil during a dance festival, revealing that cocaine consumption doubled during the event days. The daily drug loads were 0.95 ± 0.03 to 11.4 ± 0.4 g/day for BE, 1.8 ± 0.4 to 7.6 ± 0.3 g/day for COC, 0.04 ± 0.02 to 0.19 ± 0.02 g/day for COE, and 0.08 ± 0.02 to 0.80 ± 0.02 g/day for MDMA.

Microplastics abundance associated with farmland use types and the impact on soil microbial communities: A case study in Southern China

To investigate the impact of various farmland use types on the spatial distribution of microplastics (MPs) and their correlation with microbial communities, 78 soil samples from distinct farmland use types (orchard, paddy field, and vegetable field) in Southern China were examined. Results revealed that the abundance of MPs ranged from 528 to 39,864 items/kg with a mean abundance of 10,562 items/kg, which were primarily 0-30 µm in size. A total of 32 polymer types were identified, with the main polymer being polyethylene terephthalate (PET, 28.8 %), followed by polyvinyl chloride (PVC, 13.5 %) and fluororubber (FKM, 9.5 %). The abundance of MPs was highest in orchard field (8896 ± 5745 items/kg), followed by paddy field (4176 ± 2976 items/kg) and lastly vegetable field (2967 ± 3698 items/kg). Results of 16 S rRNA gene amplicon sequencing showed that the presence of MPs affected the bacterial distribution patterns. Compared with soil bacterial communities, the spatial dispersion and dissimilarity of plasticsphere communities were less variable. Notably, the predicted sequences related to xenobiotics biodegradation and metabolism became more abundant, thereby affecting the ecological function of soil. Overall, this study provides important data for further research on MP ecosystem risks associated with farmland use types.

Microplastics and per- and polyfluoroalkyl substances (PFAS) in landfill-wastewater treatment systems: A field study

Landfills and wastewater treatment plants (WWTP) are point sources for many emerging contaminants, including microplastics and per- and polyfluoroalkyl substances (PFAS). Previous studies have estimated the abundance and transport of microplastics and PFAS separately in landfills and WWTPs. In addition, previous studies typically report concentrations of microplastics as particle count/L or count/g sediment, which do not provide the information needed to calculate mass balances. We measured microplastics and PFAS in four landfill-WWTP systems in Illinois, USA, and quantified mass of both contaminants in landfill leachate, WWTP influent, effluent, and biosolids. Microplastic concentrations in WWTP influent were similar in magnitude to landfill leachates, in the order of 102 μg plastic/L (parts-per-billion). In contrast, PFAS concentrations were higher in leachates (parts-per-billion range) than WWTP influent (parts-per-trillion range). After treatment, both contaminants had lower concentrations in WWTP effluent, although were abundant in biosolids. We concluded that WWTPs reduce PFAS and microplastics, lowering concentrations in the effluent that is discharged to nearby surface waters. However, partitioning of both contaminants to biosolids may reintroduce them as pollutants when biosolids are landfilled or used as fertilizer.

The role of marine bacteria in modulating the environmental impact of heavy metals, microplastics, and pesticides: a comprehensive review

Bacteria assume a pivotal role in mitigating environmental issues associated with heavy metals, microplastics, and pesticides. Within the domain of heavy metals, bacteria exhibit a wide range of processes for bioremediation, encompassing biosorption, bioaccumulation, and biotransformation. Toxigenic metal ions can be effectively sequestered, transformed, and immobilized, hence reducing their adverse environmental effects. Furthermore, bacteria are increasingly recognized as significant contributors to the process of biodegradation of microplastics, which are becoming increasingly prevalent as contaminants in marine environments. These microbial communities play a crucial role in the colonization, depolymerization, and assimilation processes of microplastic polymers, hence contributing to their eventual mineralization. In the realm of pesticides, bacteria play a significant role in the advancement of environmentally sustainable biopesticides and the biodegradation of synthetic pesticides, thereby mitigating their environmentally persistent nature and associated detrimental effects. Gaining a comprehensive understanding of the intricate dynamics between bacteria and anthropogenic contaminants is of paramount importance in the pursuit of technologically advanced and environmentally sustainable management approaches.

Wastewater-associated plastispheres: A hidden habitat for microbial pathogens?

Wastewater treatment plants (WWTPs) receive wastewater from various sources. Despite wastewater treatment aiming to remove contaminants, microplastics persist. Plastic surfaces are quickly colonized by microbial biofilm ("plastispheres"). Plastisphere communities are suggested to promote the spread and survival of potential human pathogens, suggesting that the transfer of plastispheres from wastewater to the environment could pose a risk to human and environmental health. The study aimed to identify pathogens in wastewater plastispheres, specifically food-borne pathogens, in addition to characterizing the taxonomic diversity and composition of the wastewater plastispheres. Plastispheres that accumulated on polypropylene (PP), polyvinyl chloride (PVC), and high-density polyethylene propylene (HDPE) surfaces exposed to raw and treated wastewater were analyzed via cultivation methods, quantitative reverse transcription PCR (RT‒qPCR) and 16S rRNA amplicon sequencing. RT‒qPCR revealed the presence of potential foodborne pathogenic bacteria and viruses, such as Listeria monocytogenes, Escherichia coli, norovirus, and adenovirus. Viable isolates of the emerging pathogenic species Klebsiella pneumoniae and Acinetobacter spp. were identified in the plastispheres from raw and treated wastewater, indicating that potential pathogenic bacteria might survive in the plastispheres during the wastewater treatment. These findings underscore the potential of plastispheres to harbor and disseminate pathogenic species, posing challenges to water reuse initiatives. The taxonomic diversity and composition of the plastispheres, as explored through 16S rRNA amplicon sequencing, were significantly influenced by the wastewater environment and the duration of time the plastic spent in the wastewater. In contrast, the specific plastic material did not influence the bacterial composition, while the bacterial diversity was affected. Without efficient wastewater treatment and proper plastic waste management, wastewater could act as a source of transferring plastic-associated pathogens into the food chain and possibly pose a threat to human health. Continued research and innovation are essential to improve the removal of microplastics and associated pathogenic microorganisms in wastewater.

A critical review of microplastics in aquatic ecosystems: Degradation mechanisms and removing strategies

Plastic waste discarded into aquatic environments gradually degrades into smaller fragments, known as microplastics (MPs), which range in size from 0.05 to 5 mm. The ubiquity of MPs poses a significant threat to aquatic ecosystems and, by extension, human health, as these particles are ingested by various marine organisms including zooplankton, crustaceans, and fish, eventually entering the human food chain. This contamination threatens the entire ecological balance, encompassing food safety and the health of aquatic systems. Consequently, developing effective MP removal technologies has emerged as a critical area of research. Here, we summarize the mechanisms and recently reported strategies for removing MPs from aquatic ecosystems. Strategies combining physical and chemical pretreatments with microbial degradation have shown promise in decomposing MPs. Microorganisms such as bacteria, fungi, algae, and specific enzymes are being leveraged in MP remediation efforts. Recent advancements have focused on innovative methods such as membrane bioreactors, synthetic biology, organosilane-based techniques, biofilm-mediated remediation, and nanomaterial-enabled strategies, with nano-enabled technologies demonstrating substantial potential to enhance MP removal efficiency. This review aims to stimulate further innovation in effective MP removal methods, promoting environmental and social well-being.

Microplastic contamination of bryophytes: A review on mechanisms and impacts

This systematic review investigates the interactions of microplastics (MPs) and nanoplastics (NPs) with bryophytes, incorporating findings from 11 articles identified through a comprehensive database search using a combination of keywords. The review explores mechanisms such as adsorption and internalization by which MPs and NPs are present in bryophytes and examines the ecological ramifications, including changes in bryophyte community structure and impacts on ecosystem functions such as nutrient cycling, soil formation, habitat provision, water balance, and erosion control. Despite providing valuable insights, this review highlights several critical knowledge gaps that warrant further investigation. Future research should address the following areas: the long-term effects of MPs and NPs on bryophyte health and survival, the mechanisms of MP and NP uptake and translocation within bryophytes, and the broader ecological consequences of plastic pollution on bryophyte-dominated ecosystems. Additionally, studies should explore the effectiveness of various mitigation and management strategies, including advanced waste management techniques and innovative technologies, in reducing plastic pollution and protecting these vital ecosystems.

Microbial Succession on Microplastics in Wastewater Treatment Plants: Exploring the Complexities of Microplastic-Microbiome Interactions

Despite some effectiveness of wastewater treatment processes, microplastics accumulate in sewage sludge and their further use may contribute to the release of plastic microplastics into the environment. There is an urgent need to reduce the amount of microplastics in sewage sludge. Plastic particles serve as solid substrates for various microorganisms, promoting the formation of microbial biofilms with different metabolic activities. The biofilm environment associated with microplastics will determine the efficiency of treatment processes, especially biological methods, and the mechanisms of organic compound conversion. A significant source of microplastics is the land application of sewage sludge from wastewater treatment plants. The detrimental impact of microplastics affects soil enzymatic activity, soil microorganisms, flora, fauna, and plant production. This review article summarizes the development of research related to microplastics and discusses the issue of microplastic introduction from sewage sludge. Given that microplastics can contain complex composite polymers and form a plastisphere, further research is needed to understand their potential environmental impact, pathogenicity, and the characteristics of biofilms in wastewater treatment systems. The article also discusses the physicochemical properties of microplastics in wastewater treatment plants and their role in biofilm formation. Then, the article explained the impact of these properties on the possibility of the formation of biofilms on their surface due to the peculiar structure of microorganisms and also characterized what factors enable the formation of specific plastisphere in wastewater treatment plants. It highlights the urgent need to understand the basic information about microplastics to assess environmental toxicity more rationally, enabling better pollution control and the development of regulatory standards to manage microplastics entering the environment.

Biodegradation: the best solution to the world problem of discarded polymers

The widespread use of polymers has made our lives increasingly convenient by offering a more convenient and dependable material. However, the challenge of efficiently decomposing these materials has resulted in a surge of polymer waste, posing environment and health risk. Currently, landfill and incineration treatment approaches have notable shortcomings, prompting a shift towards more eco-friendly and sustainable biodegradation approaches. Biodegradation primarily relies on microorganisms, with research focusing on both solitary bacterial strain and multi-strain communities for polymer biodegradation. Furthermore, directed evolution and rational design of enzyme have significantly contributed to the polymer biodegradation process. However, previous reviews often undervaluing the role of multi-strain communities. In this review, we assess the current state of these three significant fields of research, provide practical solutions to issues with polymer biodegradation, and outline potential future directions for the subject. Ultimately, biodegradation, whether facilitated by single bacteria, multi-strain communities, or engineered enzymes, now represents the most effective method for managing waste polymers.

Review of nomenclature and methods of analysis of polyethylene terephthalic acid hydrolyzing enzymes activity

Enzymatic degradation of polyethylene terephthalic acid (PET) has been gaining increasing importance. This has resulted in a significant increase in the search for newer enzymes and the development of more efficient enzyme-based systems. Due to the lack of a standard screening process, screening new enzymes has relied on other assays to determine the presence of esterase activity. This, in turn, has led to various nomenclatures and methods used to describe them and measure their activity. Since all PET-hydrolyzing enzymes are α/β hydrolases, they catalyze a serine nucleophilic attack and cleave an ester bond. They are lipases, esterases, cutinases and hydrolases. This has been used interchangeably, leading to difficulties while comparing results and evaluating progress. This review discusses the varied enzyme nomenclature being adapted, the different assays and analysis methods reported, and the strategies used to increase PET-hydrolyzing enzyme efficiency. A section on the various ways to quantify PET hydrolysis is also covered.

Wastewater treatment bacteria show differential preference for colonizing natural biopolymers

Most reduced organic matter entering activated sludge systems is particulate (1-100-µm diameter) or colloidal (0.001-1-µm diameter), yet little is known about colonization of particulate organic matter by activated sludge bacteria. In this study, colonization of biopolymers (chitin, keratin, lignocellulose, lignin, and cellulose) by activated sludge bacteria was compared with colonization of glass beads in the presence and absence of regular nutrient amendment (acetate and ammonia). Scanning electron microscopy and quantitative PCR revealed chitin and cellulose were most readily colonized followed by lignin and lignocellulose, while keratin and glass beads were relatively resistant to colonization. Bacterial community profiles on particles compared to sludge confirmed that specific bacterial phylotypes preferentially colonize different biopolymers. Nitrifying bacteria proved adept at colonizing particles, achieving higher relative abundance on particles compared to bulk sludge. Denitrifying bacteria showed similar or lower relative abundance on particles compared to sludge. KEY POINTS: • Some activated sludge bacteria colonize natural biopolymers more readily than others. • Nitrifying bacteria are overrepresented in natural biopolymer biofilm communities. • Biopolymers in wastewater likely influence activated sludge community composition.

Biodegradation of polyethylene (PE), polypropylene (PP), and polystyrene (PS) microplastics by floc-forming bacteria, Bacillus cereus strain SHBF2, isolated from a commercial aquafarm

The ubiquitous proximity of the commonly used microplastic (MP) particles particularly polyethylene (PE), polypropylene (PP), and polystyrene (PS) poses a serious threat to the environment and human health globally. Biological treatment as an environment-friendly approach to counter MP pollution has recent interest when the bio-agent has beneficial functions in their ecosystem. This study aimed to utilize beneficial floc-forming bacteria Bacillus cereus SHBF2 isolated from an aquaculture farm in reducing the MP particles (PE, PP, and PS) from their environment. The bacteria were inoculated for 60 days in a medium containing MP particle as a sole carbon source. On different days of incubation (DOI), the bacterial growth analysis was monitored and the MP particles were harvested to examine their weight loss, surface changes, and alterations in chemical properties. After 60 DOI, the highest weight loss was recorded for PE, 6.87 ± 0.92%, which was further evaluated to daily reduction rate (k), 0.00118 day-1, and half-life (t1/2), 605.08 ± 138.52 days. The OD value (1.74 ± 0.008 Abs.) indicated the higher efficiency of bacteria for PP utilization, and so for the colony formation per define volume (1.04 × 1011 CFU/mL). Biofilm formation, erosions, cracks, and fragments were evident during the observation of the tested MPs using the scanning electron microscope (SEM). The formation of carbonyl and alcohol group due to the oxidation and hydrolysis by SHBF2 strain were confirmed using the Fourier transform infrared spectroscopic (FTIR) analysis. Additionally, the alterations of pH and CO2 evolution from each of the MP type ensures the bacterial activity and mineralization of the MP particles. The findings of this study have confirmed and indicated a higher degree of biodegradation for all of the selected MP particles. B. cereus SHBF2, the floc-forming bacteria used in aquaculture, has demonstrated a great potential for use as an efficient MP-degrading bacterium in the biofloc farming system in the near future to guarantee a sustainable green aquaculture production.

Freshwater plastisphere: a review on biodiversity, risks, and biodegradation potential with implications for the aquatic ecosystem health

The plastisphere, a unique microbial biofilm community colonizing plastic debris and microplastics (MPs) in aquatic environments, has attracted increasing attention owing to its ecological and public health implications. This review consolidates current state of knowledge on freshwater plastisphere, focussing on its biodiversity, community assembly, and interactions with environmental factors. Current biomolecular approaches revealed a variety of prokaryotic and eukaryotic taxa associated with plastic surfaces. Despite their ecological importance, the presence of potentially pathogenic bacteria and mobile genetic elements (i.e., antibiotic resistance genes) raises concerns for ecosystem and human health. However, the extent of these risks and their implications remain unclear. Advanced sequencing technologies are promising for elucidating the functions of plastisphere, particularly in plastic biodegradation processes. Overall, this review emphasizes the need for comprehensive studies to understand plastisphere dynamics in freshwater and to support effective management strategies to mitigate the impact of plastic pollution on freshwater resources.

Anthropogenic particle concentrations and fluxes in an urban river are temporally variable and impacted by storm events

Anthropogenic particles (AP), which include microplastics and other synthetic, semisynthetic, and anthropogenically modified materials, are pollutants of concern in aquatic ecosystems worldwide. Rivers are important conduits and retention sites for AP, and time series data on the movement of these particles in lotic ecosystems are needed to assess the role of rivers in the global AP cycle. Much research assessing AP pollution extrapolates stream loads based on single time point measurements, but lotic ecosystems are highly variable over time (e.g., seasonality and storm events). The accuracy of models describing AP dynamics in rivers is constrained by the limited studies that examine how frequent changes in discharge drive particle retention and transport. This study addressed this knowledge gap by using automated, high-resolution sampling to track AP concentrations and fluxes during multiple storm events in an urban river (Milwaukee River) and comparing these measurements to commonly monitored water quality metrics. AP concentrations and fluxes varied significantly across four storm events, highlighting the temporal variability of AP dynamics. When data from the sampling periods were pooled, there were increases in particle concentration and flux during the early phases of the storms, suggesting that floods may flush AP into the river and/or resuspend particles from the benthic zone. AP flux was closely linked to river discharge, suggesting large loads of AP are delivered downstream during storms. Unexpectedly, AP concentrations were not correlated with other simultaneously measured water quality metrics, including total suspended solids, fecal coliforms, chloride, nitrate, and sulfate, indicating that these metrics cannot be used to estimate AP. These data will contribute to more accurate models of particle dynamics in rivers and global plastic export to oceans. PRACTITIONER POINTS: Anthropogenic particle (AP) concentrations and fluxes in an urban river varied across four storm events. AP concentrations and fluxes were the highest during the early phases of the storms. Storms increased AP transport downstream compared with baseflow. AP concentrations did not correlate with other water quality metrics during storms.

Microplastic accumulation in sewer sediments and its potential entering the environment via combined sewer overflows: a study case in Paris

During wet weather events, combined sewer overflows (CSOs) transfer large amount of particulate matter and associated pollutants into surrounding water bodies, thereby deteriorating the recipients' ecological health. Resuspension of sewer sediments during these events contributes significantly to pollution level of these discharges. However, how much this in-sewer process contributes to CSOs' quality regarding microplastic (MP) pollution is little known. Therefore, an investigation on sewer deposits inside the Parisian combined sewer network was carried out. The study found high MP concentrations stored in this matrix, ranging from 5 × 103 to 178 × 103 particle/kg dry weight. Polymer composition is similar to what found in raw wastewater, containing a high proportion of polyethylene and polypropylene. Thus, the results indicated the persistence of MPs in sewer network during transport during dry weather periods to treatment facilities. Once resuspension of sewer deposits happens, MPs can be released into water flow and get discharged along with CSOs. This highlights another potential pathway of MPs into freshwater environment.

Evidence of interspecific plasmid uptake by pathogenic strains of Klebsiella isolated from microplastic pollution on public beaches

Microplastic beads are becoming a common feature on beaches, and there is increasing evidence that such microplastics can become colonised by potential human pathogens. However, whether the concentrations and pathogenicity of these pathogens pose a public health risk are still unclear. Therefore, the aim of this study was to determine realistic environmental concentrations of potential pathogens colonising microplastic beads, and quantify the expression of virulence and antimicrobial resistance genes (ARGs). Microplastic beads were collected from beaches and a culture-dependent approach was used to determine the concentrations of seven target bacteria (Campylobacter spp.; E. coli; intestinal enterococci; Klebsiella spp.; Pseudomonas aeruginosa; Salmonella spp.; Vibrio spp.). All seven target bacteria were detected without the need for a pre-enrichment step; urban sites had higher bacterial concentrations, whilst polymer type had no influence on bacterial concentrations. Klebsiella was the most abundant target bacteria and possessed virulence and ARGs, some of which were present on plasmids from other species, and showed pathogenicity in a Galleria melonella infection model. Our findings demonstrate how pathogen colonised microplastic beads can pose a heightened public health risk at the beach, and highlights the urgency for improved monitoring and enforcement of regulations on the release of microplastics into the environment.

Assessment of Biofilm Growth on Microplastics in Freshwaters Using a Passive Flow-Through System

Biofilms that colonize on the surface of microplastics (MPs) in freshwaters may pose a potential health risk. This study examined factors that influence MP-associated biofilm growth, including polymer type, degree of weathering, and source water quality. Weathered MPs produced in-lab were employed in biofilm trials conducted on site using a passive flow-through system with raw water at drinking water treatment facility intakes. Adenosine triphosphate (ATP) was used to quantify biofilm abundance; biofilm composition was assessed via metagenomic sequencing. Biofilm growth was observed on all polymer types examined and most prevalent on polyvinyl chloride (PVC), where ATP levels were 6 to 12 times higher when compared to other polymers. Pathogen-containing species including Salmonella enterica and Escherichia coli were present on all polymers with relative abundance up to 13.7%. S. enterica was selectively enriched on weathered MPs in specific water matrices. These findings support the need to research the potential accumulation of pathogenic organisms on microplastic surfaces.

Role of water shear force for microplastics fragmentation into nanoplastics

Wastewater treatment plants (WWTPs) are major recipients of microplastics (MPs) that break down into nanoplastics (NPs) during wastewater treatment through physical, chemical, and biological processes. In particular, mechanical stress induced by the mixing process commonly used in WWTPs is thought to play a crucial role in the production of secondary MPs/NPs, which are then discharged into the open water environment through the WWTP effluent. This study investigated the fragmentation of 250 and 106 μm-sized pristine and weathered polystyrene (PS) particles using a four-blade mechanical impeller. At an energy density level of 100 kJ/L, the 250 and 106 μm-sized pristine PS particles were broken down into mean sizes of 120.6 ± 19.1 and 95.6 ± 16.8 nm, respectively. The smallest sizes were found to be 90.9 ± 17.8 and 72.4 ± 19.6 nm due to the breakdown of 250 and 106 μm-sized weathered PS particles, respectively. The morphology of the PS particles after fragmentation also demonstrated the initiation of surface damage, such as cracks, pores and rough structures. This surface crack propagation, caused by mechanically induced water shear force, was identified as the primary mechanism of MP fragmentation into NPs. It was also found that NP levels significantly increased after 40 min of mixing, with at least a 28-fold increase in water solution at an energy density of 32 kJ/L. These results clearly show that the breakdown of MPs into NPs is a continuous process during wastewater treatment, posing a significant threat to the water environment through NP release by WWTP effluents.

Are microplastics in aquaculture an undeniable driver in accelerating the spread of antibiotic resistance genes?

Aquaculture products have been a key source of protein in the human food supply. Contamination by microplastics and antibiotic resistance genes (ARGs) directly affects food quality and safety. Plastic fishing gear and the long-term misuse of antibiotics result in the persistent residue, migration, and spread of microplastics and ARGs in the aquaculture environment, causing in ecological imbalance and endangering human security. Microplastics can act as "petri dishes" for the reproduction, communication, and spread of ARGs, which adds an additional layer of complexity to the global issues surrounding microplastics and ARGs. Aquaculture has become an important source of microplastics and ARGs in natural waters. Accordingly, this paper mainly discusses the contribution of aquaculture to the presence of microplastics and ARGs in aquatic ecosystems. Microplastics and ARGs can (1) affect the production and quality of aquatic products; (2) influence the development and reproduction of aquatic organisms; and (3) accelerate the spread of resistant bacteria. How to eliminate microplastics and ARGs and block their transmission has become a worldwide problem. Actually, further research is required to understand the scale and scope of these effects.

Plastic substrate and residual time of microplastics in the urban river shape the composition and structure of bacterial communities in plastisphere

The widespread secondary microplastics (MPs) in urban freshwater, originating from plastic wastes, have created a new habitat called plastisphere for microorganisms. The factors influencing the structure and ecological risks of the microbial community within the plastisphere are not yet fully understood. We conducted an in-site incubation experiment in an urban river, using MPs from garbage bags (GB), shopping bags (SB), and plastic bottles (PB). Bacterial communities in water and plastisphere incubated for 2 and 4 weeks were analyzed by 16S high-throughput sequencing. The results showed the bacterial composition of the plastisphere, especially the PB, exhibited enrichment of plastic-degrading and photoautotrophic taxa. Diversity declined in GB and PB but increased in SB plastisphere. Abundance analysis revealed distinct bacterial species that were enriched or depleted in each type of plastisphere. As the succession progressed, the differences in community structure was more pronounced, and the decline in the complexity of bacterial community within each plastisphere suggested increasing specialization. All the plastisphere exhibited elevated pathogenicity at the second or forth week, compared to bacterial communities related to natural particles. These findings highlighted the continually evolving plastisphere in urban rivers was influenced by the plastic substrates, and attention should be paid to fragile plastic wastes due to the rapidly increasing pathogenicity of the bacterial community attached to them.

The role of microbe-microplastic associations in marine Nematode feeding behaviors

Fauna across many taxa and trophic levels have been shown to consume microplastics (MPs) in experiments, providing evidence that supports field-based gut content assessments. Multiple explanations exist regarding why fauna consume MPs, one of which posits that microbial growth on MPs may facilitate faunal ingestion. However, laboratory assessments on the reasons why MPs are consumed remain limited. Here, we assessed if the presence of microbes on MPs altered marine nematode feeding behaviors across current and potential future concentrations of MPs in a local system. We used a microcosm experiment in which field-collected sediment was spiked with bacterially treated or untreated fluorescent plastic microbeads (1.0-5.0 μm) in concentrations of 102, 104, and 106 per microcosm, representing local and potential future concentrations of MPs. Ingestion by the dominant interstitial fauna was investigated after 0, 3, and 7 days using bright field microscopy. Nematodes were the only fauna across microcosms that consumed MPs, but this consumption was variable and there were no apparent trends across exposure time, bacterial treatment, or MP concentration. There were also no genera- or feeding-type-specific trends in the number of MPs consumed, though four of the top five nematode genera that consumed MPs were pollution-tolerant genera. Our study demonstrates that microbe-MP associations do not drive marine nematodes to eat MPs, especially at local field concentrations. While there were no trends across any of the nematode genera in our study, we recognize that unrealistic MP concentrations in other studies may provide alternative explanations for nematode consumption of MPs.

Spatiotemporal distribution of microplastics in Miri coastal area, NW Borneo: inference from a periodical observation

The current study aims to investigate the spatiotemporal distribution of microplastics (MPs) in the Miri coast, targeting their occurrences, characterisation, and potential sources. For a periodical study, coastal sediments were collected from three different time intervals (monsoon, post-monsoon, and post-COVID) and subjected to stereomicroscope, ATR-FTIR, and SEM-EDX analyses. These results show a significant increase of MPs in post-COVID samples by approximately 218% and 148% comparatively with monsoon and post-monsoon samples, respectively. The highest concentration of MPs was detected near the river mouths and industrial areas where the waste discharge rate and anthropogenic activities dominate. Fibre-type MPs are the most abundant, with an average of nearly 64%, followed by fragments, films, microbeads, and foams. The most dominant polymer types were polytetrafluoroethylene (PTFE), polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyester (PET). Overall, the current study shows a better understanding of MPs occurrence and potential sources in the Miri coastal area.

The hidden risk of microplastic-associated pathogens in aquatic environments

Increasing studies of plastisphere have raised public concern about microplastics (MPs) as vectors for pathogens, especially in aquatic environments. However, the extent to which pathogens affect human health through MPs remains unclear, as controversies persist regarding the distinct pathogen colonization on MPs as well as the transmission routes and infection probability of MP-associated pathogens from water to humans. In this review, we critically discuss whether and how pathogens approach humans via MPs, shedding light on the potential health risks involved. Drawing on cutting-edge multidisciplinary research, we show that some MPs may facilitate the growth and long-range transmission of specific pathogens in aquatic environments, ultimately increasing the risk of infection in humans. We identify MP- and pathogen-rich settings, such as wastewater treatment plants, aquaculture farms, and swimming pools, as possible sites for human exposure to MP-associated pathogens. This review emphasizes the need for further research and targeted interventions to better understand and mitigate the potential health risks associated with MP-mediated pathogen transmission.

Bacterial community succession and the enrichment of antibiotic resistance genes on microplastics in an oyster farm

Microplastics can be colonized by microorganisms and form plastisphere. However, knowledge of bacterial community succession and the enrichment of antibiotic resistance genes (ARGs) and pathogens on microplastics in aquaculture environments is limited. Here, we conducted a 30-day continuous exposure experiment at an oyster farm. Results showed that the alpha-diversity of communities on most microplastics continuously increased and was higher than in planktonic communities after 14 days. Microplastics could selectively enrich certain bacteria from water which can live a sessile lifestyle and promote colonization by other bacteria. The composition and function of plastisphere communities were distinct from those in the surrounding water and influenced by polymer type and exposure time. Microplastics can enrich ARGs (sul1, qnrS and blaTEM) and harbor potential pathogens (e.g., Pseudomonas aeruginosa). Therefore, microplastic pollution may pose a critical threat to aquaculture ecosystems and human health. Our study provides further insight into the ecological risks of microplastics.

Could Microplastics Be a Driver for Early Onset Colorectal Cancer?

Introduction: The incidence of colorectal cancer in those under 50 years of age (early onset colorectal cancer (EOCRC)) is increasing throughout the world. This has predominantly been an increase in distal colonic and rectal cancers, which are biologically similar to late onset colorectal cancer (LOCRC) but with higher rates of mucinous or signet ring histology, or poorly differentiated cancers. The epidemiology of this change suggests that it is a cohort effect since 1960, and is most likely driven by an environmental cause. We explore the possible role of microplastics as a driver for this change. Review: The development of sporadic colorectal cancer is likely facilitated by the interaction of gut bacteria and the intestinal wall. Normally, a complex layer of luminal mucus provides colonocytes with a level of protection from the effects of these bacteria and their toxins. Plastics were first developed in the early 1900s. After 1945 they became more widely used, with a resultant dramatic increase in plastic pollution and their breakdown to microplastics. Microplastics (MPs) are consumed by humans from an early age and in increasingly large quantities. As MPs pass through the gastrointestinal tract they interact with the normal physiological mechanism of the body, particularly in the colon and rectum, where they may interact with the protective colonic mucus layer. We describe several possible mechanisms of how microplastics may disrupt this mucus layer, thus reducing its protective effect and increasing the likelihood of colorectal cancer. Conclusions: The epidemiology of increase in EOCRC suggests an environmental driver. This increase in EOCRC matches the time sequence in which we could expect to see an effect of rapid increase of MPs in the environment and, as such, we have explored possible mechanisms for this effect. We suggest that it is possible that the MPs damage the barrier integrity of the colonic mucus layer, thus reducing its protective effect. MPs in CRC pathogenesis warrants further investigation. Future directions: Further clarification needs to be sought regarding the interaction between MPs, gut microbiota and the mucus layer. This will need to be modelled in long-term animal studies to better understand how chronic consumption of environmentally-acquired MPs may contribute to an increased risk of colorectal carcinogenesis.

Microplastic biofilm, associated pathogen and antimicrobial resistance dynamics through a wastewater treatment process incorporating a constructed wetland

Microplastics in wastewater are colonized by biofilms containing pathogens and antimicrobial resistance (AMR) genes that can be exported into receiving water bodies. This study investigated establishment and changes in microplastic-associated biofilm and AMR during a conventional full-scale 2100 population equivalent wastewater treatment process combined with a free water surface polishing constructed wetland. Sequential microplastic colonization experiments were conducted at different stages of the wastewater treatment process, including in raw sewage, treated effluent and the constructed wetland. Two scenarios were tested in which the constructed wetland served as either (i) a polishing step or (ii) as primary recipient of sewage inoculated microplastics. Bacterial 16S rRNA gene sequencing was carried out for qualitative bacterial community analysis. qPCR was applied for quantitative analysis of AMR genes (sul1, ermB, tetW, intiI1), bacterial biomass (16S rRNA) and a human fecal marker (HF183). Microbial diversity on microplastics increased with incubation time. The initial sewage-derived biofilm composition changed more significantly in the wastewater effluent compared to the constructed wetland. Pathogen and AMR load decreased by up to two orders of magnitude after coupled conventional and constructed wetland treatment, while less impact was observed when sewage-inoculated microplastic material was directly transferred into the constructed wetland. Aeromonas, Klebsiella, and Streptococcus were key pathogenic genera correlated with AMR in microplastic-associated biofilms. Despite decreasing trends on human pathogens and AMR load along the treatment process, microplastic-associated biofilms were a considerable potential hotspot for AMR (intI1 gene) and accommodated Cyanobacteria and fish pathogens.

From wastewater discharge to the beach: Survival of human pathogens bound to microplastics during transfer through the freshwater-marine continuum

Large quantities of microplastics are regularly discharged from wastewater treatment plants (WWTPs) into the aquatic environment. Once released, these plastics can rapidly become colonised by microbial biofilm, forming distinct plastisphere communities which may include potential pathogens. We hypothesised that the protective environment afforded by the plastisphere would facilitate the survival of potential pathogens during transitions between downstream environmental matrices and thus increase persistence and the potential for environmental dissemination of pathogens. The survival of Escherichia coli, Enterococcus faecalis and Pseudomonas aeruginosa colonising polyethylene or glass particles has been quantified in mesocosm incubation experiments designed to simulate, (1) the direct release of microplastics from WWTPs into freshwater and seawater environments; and (2) the movement of microplastics downstream following discharge from the WWTP through the river-estuary-marine-beach continuum. Culturable E. coli, E. faecalis and P. aeruginosa were successfully able to survive and persist on particles whether they remained in one environmental matrix or transitioned between different environmental matrices. All three bacteria were still detectable on both microplastic and glass particles after 25 days, with higher concentrations on microplastic compared to glass particles; however, there were no differences in bacterial die-off rates between the two materials. This potential for environmental survival of pathogens in the plastisphere could facilitate their transition into places where human exposure is greater (e.g., bathing waters and beach environments). Therefore, risks associated with pathogen-microplastic co-pollutants in the environment, emphasises the urgency for updated regulations on wastewater discharge and the management of microplastic generation and release.

Biofilm formation strongly influences the vector transport of triclosan-loaded polyethylene microplastics

This study aimed at evaluating the influence of biofilm in the role of microplastics (MPs) as vectors of pollutants and their impact on Daphnia magna. To do this, virgin polyethylene MPs, (PE-MPs, 40-48 μm) were exposed for four weeks to wastewater (WW) from influent and effluent to promote biofouling. Then, the exposed PE-MPs were put in contact with triclosan. Finally, the toxicity of TCS-loaded and non-TCS loaded PE-MPs were tested on the survival of D. magna adults for 21 days. Results from metabarcoding analyses indicated that exposure to TCS induced shifts in the bacterial community, selecting potential TCS-degrading bacteria. Results also showed that PE-MPs were ingested by daphnids. The most toxic virgin PE-MPs were those biofouled in the WW effluent. The toxicity of TCS-loaded PE-MPs biofouled in the WW effluent was even higher, reporting mortality in all tested concentrations. These results indicate that biofouling of MPs may modulate the adsorption and subsequent desorption of co-occurring pollutants, hence affecting their potential toxicity towards aquatic organisms. Future studies on realistic environmental plastic impact should include the characterization of biofilms growing on plastic. Since inevitably plastic biofouling occurs over time in nature, it should be taken into account as it may modulate the sorption of co-occurring pollutants.

Influence of wastewater treatment plants and water input sources on size, shape, and polymer distributions of microplastics in St. Andrew Bay, Florida, USA

Microplastic (MP) pollution is an ongoing problem in coastal systems, where wastewater treatment plants (WWTPs) deposit particles daily. This study examined MP characteristics at WWTP outflow and control sites in St. Andrew Bay in Northwestern Florida, USA. WWTP sites contained mostly polypropylene fragments (180.1 μm avg. size), while reference sites contained polypropylene fragments, and polyethylene and polyester fibers (315.3 μm avg. size). MP sizes were strongly linked to distance from the nearest WWTP, while shape and polymer compositions were more closely related to dissolved oxygen concentrations and distance to the nearest water input source. The prevalence of polypropylene fragments at WWTP sites suggests that extreme weather events during the study flushed land-based debris into the system, where it was buried in the sediments. Increased abundances of polyester and polyethylene terephthalate in the winter at WWTP sites are indicative of the role that laundering synthetic textiles plays in coastal MP pollution.

Microplastic dynamics in a free water surface constructed wetland

This study investigates microplastic (MPs) dynamics of a recently established surface flow 2100 population equivalent polishing constructed wetland (CW) receiving 1.4 ML per day of secondary treated wastewater. MPs type, size ranges and concentrations were measured along the CW at a 2-months sampling campaign. The CW received an average of 5·10⁶ MPs per day (6 MPs per liter), mostly 100-1000 μm-sized synthetic fibers followed by fragments in the same size range. 95 % of MPs were retained, resulting in 0.30 ± 0.09 MPs per liter in CW effluent. Most MPs (97 %) were trapped within the first 20 % of the CW which consisted of a settling pond and shallow vegetated treatment cells and provided an areal removal rate > 4000 MP m^-2 d^-1. Data and microscopic analysis indicate MPs erosion and fragmentation in the CW. Turbidity and suspended solids were no indicator for MP removal due to water fowl activity, algal growth, and preferential flow conditions. This is the first study on MP dynamics in an independently operating full scale free water surface CW incorporated into a municipal wastewater treatment scheme. Surface flow CWs can retain MPs effectively but accumulation in CW sediments and substrate needs to be considered when further utilized or recycled.

Microplastics influence the fate of antibiotics in freshwater environments: Biofilm formation and its effect on adsorption behavior

Microplastics (MPs) are substrates available for biofilms colonization in natural water environments. The biofilms formation may enhance the ability of MPs to adsorb harmful contaminants. Herein, we investigated the biofilms formation of three different MPs (PVC, PA and HDPE) in simulated natural environment, and observed the chemical structure, charge property, hydrophobicity and other properties of MPs affect microbial biomass and community composition. More importantly, potential pathogens were found in all three MPs biofilms. Furthermore, the adsorption capacities of original MPs and biological aging MPs for norfloxacin (NOR) was compared. HDPE has the largest adsorption capacity for NOR, while PA has the smallest adsorption capacity for NOR. It was concluded that the formation of biofilms enhanced the adsorption of NOR by 50.60 %, 24.17 % and 46.02 % for PVC, PA and HDPE, respectively. In addition, hydrogen-bond interaction, electrostatic interaction and hydrophobic interaction were found to dominate the adsorption of NOR by MPs. Our study contributed to improve the understanding of the interactions between aging MPs and contaminants in the natural water environments, and provided essential information for ecological risk assessment of MPs.

Airborne polystyrene microplastics and nanoplastics induce nasal and lung microbial dysbiosis in mice

Microplastics (MP) and nanoplastics (NP) have been found in multiple environments and creatures. However, their effects on the airway microbiota still remain poorly understood. In this study, a series of bioinformatic and statistical analyses were carried out to explore the influence of airborne MP and NP on the nasal and lung microbiota in mice. Both MP and NP were capable of inducing nasal microbial dysbiosis, and MP had a stronger influence on the lung microbiota than NP. Multiple nasal and lung bacteria were associated with MP and NP groups, among which nasal Staphylococcus and lung Roseburia were most associated with MP group, while nasal Prevotella and lung unclassified_Muribaculaceae were most associated with NP group. The nasal Staphylococcus, lung Roseburia, lung Eggerthella and lung Corynebacterium were associated with both MP and NP groups, which were potential biomarkers of micro/nanoplastics-induced airway dysbiosis. SAR11_Clade_Ia and SAR11_Clade_II were associated with both nasal and lung microbiota in MP group, while no such bacterium was determined in NP group. The relevant results suggest that both airborne MP and NP could induce nasal and lung microbial dysbiosis, and the relevant preventative and curable strategies deserve further investigations.

The dangerous transporters: A study of microplastic-associated bacteria passing through municipal wastewater treatment

Microplastics (MPs) provide a stable and protective habitat for diverse wastewater bacteria, including pathogenic and antibiotic-resistant species. Therefore, MPs may potentially transport these bacteria through wastewater treatment steps to the environment and far distances. This study investigated bacterial communities of MP-associated bacteria from different stages of municipal wastewater treatment processes to evaluate the potential negative effect of these biofilms on the environment. The results showed a high diversity of bacteria that were strongly attached to MPs. After all treatment steps, the core bacterial groups remained attached to MPs and escaped from the wastewater treatment plant with effluent water. Several pathogenic bacteria were identified in MP samples from all treatment steps, and most of them were found in effluent water. These data provide new insights into the possible impacts of wastewater-derived MPs on the environment. MP-associated biofilms were proved to be important sources of pathogens and antibiotic-resistant genes in natural waters.

Comparative Assessment of Microplastics in Surface Waters and Sediments of the Vaal River, South Africa: Abundance, Composition, and Sources

We extracted microplastics from surface water and sediment samples from the Vaal River in Johannesburg, South Africa. Average abundances of 0.61 ± 0.57 particles/ m 3 and 4.6 × 10²  ± 2.8 × 10²  particles/kg dry weight were recorded for water and sediment samples, respectively. In both sediment and water samples, more than 80% of microplastics were fragments and fibers of smaller than 2 mm. High-density polyethylene, low-density polyethylene, and polypropylene were the dominant polymers identified in both sample types. In addition, polyethylene co-vinyl acetate, polyester, polyurethane, and polyethylene/hexene-1-copolymer were also detected in sediment samples. Colored microplastics were the most commonly observed in both sample types; pigment yellow 83 was detected in surface water, and carbon black was detected in both sediment and water samples during Raman analysis. Taking into consideration the physical and chemical characteristics of the detected microplastics, their potential sources include inflow from tributaries, surface run-off from urban city centers, recreational activities, and wastewater effluent from industries and households. Environ Toxicol Chem 2022;41:3029-3040. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

The application of bioremediation in wastewater treatment plants for microplastics removal: a practical perspective

Wastewater treatment plants (WWTPs) play the role of intercepting microplastics in the environment and provide a platform for bioremediation to remove microplastics. Despite, this opportunity has not been adequately studied. This paper shows the potential ways microplastics-targeted bioremediation could be incorporated into wastewater treatment through the review of relevant literature on bioaugmentation of water treatment processes for pollutants removal. Having reviewed more than 90 papers in this area, it highlights that bioremediation in WWTPs can be employed through bioaugmentation of secondary biological treatment systems, particularly the aerobic conventional activated sludge, sequencing batch reactor, membrane bioreactor and rotating biological contactor. The efficiency of microplastics removal, however, is influenced by the types and forms of microorganisms used, the polymer types and the incubation time (100% for polycaprolactone with Streptomyces thermoviolaceus and 0.76% for low-density polyethylene with Acinetobacter iwoffii). Bioaugmentation of anaerobic system, though possible, is constrained by comparatively less anaerobic microplastics-degrading microorganisms identified. In tertiary system, bioremediation through biological activated carbon and biological aerated filter can be accomplished and enzymatic membrane reactor can be added to the system for deployment of biocatalysts. During sludge treatment, bioaugmentation and addition of enzymes to composting and anaerobic digestion are potential ways to enhance microplastics breakdown. Limitations of bioremediation in wastewater treatment include longer degradation time of microplastics, incomplete biodegradation, variable efficiency, specific microbial activities and uncertainty in colonization. This paper provides important insight into the practical applications of bioremediation in wastewater treatment for microplastics removal.

Influence of microplastics on triclosan bioaccumulation and metabolomics variation in Tilapia fish tissues

Microplastics (MPs) and chemical pollutants usually coexist in aquatic environments. The bioaccumulation and metabolism of pollutants in aquatic organisms can be influenced by MPs. In this study, the bioaccumulation of triclosan (TCS) in tilapia tissues was determined, and metabolomics in the liver, gills, and gut were investigated after 10-day exposure to micro-sized polystyrene (PS) and TCS in water. The results showed that TCS bioaccumulated in various tissues, with the highest average concentration of 2728 ± 577 ng g^-1 in the gut. The log bioaccumulation factors (BAFs) for TCS in these tissues were in the range of 0.99-3.56. Compared to the TCS treatment alone, MPs showed enhancement on the bioaccumulation of TCS in tilapia skin, liver, gut, gills, and stomach tissues in the TCS plus MP exposure. Especially in the skin and liver, the TCS concentrations were up to 2.06 and 1.38 times higher in the co-exposure of TCS and MPs, respectively. Based on the metabolomic analysis, MPs mainly disturbed the lipid and energy metabolism in tilapia fish. The altered metabolites between treatment with TCS alone and TCS + MPs were consistent, indicating that TCS has stronger disturbance in lipid and energy metabolism than MPs. This implies that the metabolism influence by the mixture of MPs and compounds is complicated in fish tissues.

Binding, recovery, and infectiousness of enveloped and non-enveloped viruses associated with plastic pollution in surface water

Microplastics in wastewater and surface water rapidly become colonised by microbial biofilm. Such 'plastisphere' communities are hypothesised to persist longer and be disseminated further in the environment and may act as a vector for human pathogens, particularly as microplastics entering wastewater treatment plants are exposed to high concentrations of pathogenic bacteria. However, the potential for human viral pathogens to become associated with the plastisphere has never before been quantified. Here, we have used rotavirus (RV) SA11 (a non-enveloped enteric virus) and the enveloped bacteriophage Phi6 as model viruses to quantify binding and recovery from biofilm-colonised microplastic pellets in three different water treatments (filtered and non-filtered surface water, and surface water with added nutrients). Viruses associated with biofilm-colonised pellets were more stable compared to those remaining in the water. While infectious particles and genome copies of RV remained stable over the 48 h sampling period, Phi6 stability was highly impacted, with a reduction ranging from 2.18 to 3.94 log₁₀. Virus particles were protected against inactivation factors when associated with the biofilm on microplastic surfaces, and when there was a high concentration of particulate matter in the liquid phase. Although our results suggest that the presence of an envelope may limit virus interaction with the plastisphere, the ability to recover both enveloped and non-enveloped infectious viruses from colonised microplastic pellets highlights an additional potential public health risk of surface waters becoming contaminated with microplastics, and subsequent human exposure to microplastics in the environment.

Modifications of microplastics in urban environmental management systems: A review

Microplastics (MPs) are a worldwide environmental pollution issue. Besides the natural environmental stresses, various treatments in urban environmental management systems induce modifications on MPs, further affecting their environmental behavior. Investigating these modifications and inherent mechanisms is crucial for assessing the environmental impact and risk of MPs. In this review, up-to-date knowledge regarding the modifications of MPs in urban environmental management systems was summarized. Variations of morphology, chemical composition, hydrophilicity and specific surface area of MPs were generalized. The aging and degradation of MPs during drinking water treatment, wastewater treatment, sewage sludge treatment and solid waste treatment were investigated. A high abundance of MPs occurred in sewage sludge and aging solid waste, while digestion and composting contributed to significant decomposition and reduction of MPs. These treatments have become converters for MPs before entering the environment. Several novel technologies for MPs removal were listed; However, no appropriate methods can be put into actual application by now, except the membrane separation. The corresponding effects of degradation on the behaviors of MPs, including adsorption, sinking and contaminant leakage, were discussed. Finally, three priorities for research were proposed. This critical review provides viewpoints and references for risk evaluation of MPs after treatments in urban environmental management systems.

Microplastics act as a carrier for wastewater-borne pathogenic bacteria in sewage

Microplastic pollution, a pressing global environmental problem, has a severe impact on both aquatic ecosystems and public health worldwide. Due to the small size of microplastics, they are able to pass through the filtration systems of municipal wastewater treatment works (WWTWs). In recent years, studies have focused on the environmental abundance and ecotoxicological effects of microplastics, but there are limited studies investigating the colonization of microplastics by bacteria, especially those pathogenic ones. In this study, we examined the colonization and composition of the bacterial communities on polyethylene microbeads after incubation in raw sewage collected from three municipal WWTWs in Hong Kong (Sha Tin Sewage Treatment Works, Stonecutters Island Sewage Treatment Works, and Shek Wu Hui Sewage Treatment Works). Scanning electron microscopy (SEM) results indicate that bacterial cells were colonized on the surfaces of the microbeads and formed biofilms after sewage incubation. Metagenomic sequencing data demonstrated an increase in bacterial diversity after 21 days of sewage incubation when compared to shorter incubation periods of 6, 11 and 16 days. Importantly, human and fish pathogens such as Arcobacter cryaerophilus, Aeromonas salmonicida, Vibrio areninigrae and Vibrio navarrensis were found in the resident bacterial communities. Taken together, our results demonstrate that microplastics could act as a carrier for wastewater-borne pathogenic bacteria in municipal sewage.

Accumulation of nylon microplastics and polybrominated diphenyl ethers and effects on gut microbial community of Chironomus sancticaroli

Microplastics (MP) are emerging contaminants with the capacity to bind and transport hydrophobic organic compounds of environmental concern, such as polybrominated diphenyl ethers (PBDEs). The aim of this study was to investigate the ingestion of nylon (polyamide) MP alone and when associated with PBDEs and their effects on Chironomus sancticaroli larvae survival and microbiome structure. Survival, PBDE uptake and microbial community composition were measured in fourth instar larvae exposed for 96 h to BDEs- 47, 99, 100 and 153 in the presence and absence of 1% w/w MP in sediment. Microbiome community structures were determined through high throughput sequencing of 16S small subunit ribosomal RNA gene (16S rRNA). Initial experiments showed that larvae ingested MP faster at 0.5% w/w MP, while depuration was more efficient at 1% w/w MP, although retention of MP was seen even after 168 h depuration. No mortality was observed as a result of PBDEs and MP exposure. MP had a negative effect on PBDE concentration within larvae (η² = 0.94) and a negative effect on sediment concentrations (η² = 0.48). In all samples, microbial communities were dominated by Alphaproteobacteria, Betaproteobacteria, Actinobacteria and Gammaproteobacteria. Bacterial alpha diversity was not significantly affected by PBDEs or MP exposure. However, the abundance of discrete bacterial taxa was more sensitive to MP (X² = 45.81, p = 0.02), and PBDE exposure. Our results highlight that C. sancticaroli showed no acute response to MPs and PBDEs, but that MPs influenced bacterial microbiome structure even after only short-term acute exposure.

Plastisphere development in relation to the surrounding biotic communities

To study the early colonization processes, polyethylene terephthalate (PET) microfragments were immersed in Lake Sakadaš and the Drava River and sampled weekly together with the surrounding biotic communities - phytoplankton, zooplankton, epixylon in the lake and epilithon in the river. At the end of the study, a rise in water level occurred in the river, which altered the environmental conditions and plankton communities. In studied environments, all of the sampled biotic communities were diverse and abundant. Plastispheres formed in both waters by the seventh day of incubation and developed rapidly, reaching a peak in abundance on the last day of the study. Initial colonization was supported equally by planktonic and periphytic taxa in both environments, but after initial settlement, plastisphere assemblages were affected differently in the river and lake. This study suggests that PET microfragments are a suitable substrate for microphyte settlement and may provide an important pathway for their transport in dynamic freshwater floodplains and river systems.

Sewage-associated plastic waste washed up on beaches can act as a reservoir for faecal bacteria, potential human pathogens, and genes for antimicrobial resistance

Sewage-associated plastic wastes, such as wet wipes and cotton bud sticks, commonly wash up on beaches; however, it is unclear whether this represents a public health risk. In this study, sewage-associated plastic waste, and naturally occurring substrates (seaweed and sand), were collected from ten beaches along the Firth of Forth estuary (Scotland, UK) and analysed using selective media for the faecal indicator organisms (FIOs) E. coli and intestinal enterococci (IE), and potential human pathogens (Vibrio spp.). Minimum inhibitory concentration (MIC) analysis was used to determine antibiotic resistance in selected strains. FIOs and Vibrio were more often associated with wet wipes and cotton bud sticks than with seaweed, and there was evidence of resistance to several antibiotics. This work demonstrates that plastics associated with sewage pollution can facilitate the survival and dissemination of FIOs and Vibrio and thus, could present an as yet unquantified potential risk to human health at the beach.

Can microplastics facilitate the emergence of infectious diseases?

Plastic pollution is a major environmental problem. Small plastic particles (called microplastics) have been reported to have pernicious effects on human and wildlife health, by altering physiological functions (e.g., immunity, metabolism) and interfering with commensal microorganisms. However, in addition to these direct toxic effects, we suggest that microplastic pollution might also exert deleterious effects, modifying (i) the exposure to pathogens (e.g., multi-drug resistant bacteria) and (ii) the dynamics of vector-borne diseases. Therefore, we argue that microplastics should be considered as a ubiquitous environmental hazard, potentially promoting the (re)emergence of infectious diseases. The implementation of multi- and interdisciplinary research projects are crucial to properly evaluate if microplastic pollution should be added to the current list of global health threats.

Characterising microplastics in shower wastewater with Raman imaging

Microplastics can potentially be released in our daily activities, such as via our showers, as our clothes are made of plastic fibres, and/or cotton fibres. The challenge is how to characterise these microplastics in shower debris. Herewith we employ Raman imaging to directly visualise the microplastics collected from shower wastewater. Raman can map an image from the scanning array that contains a matrix of thousands of spectra, featuring a considerably higher signal-noise ratio than that from a single spectrum. The increased signal-noise ratio reduces the complexity of sample preparation. Consequently, after the shower debris was sampled and washed, Raman imaging allowed us to distinguish the microplastic fibres from the background including cotton fibres and dirt aggregates. Interestingly, by adjusting the laser power intensity, the scanning process enabled simultaneous in-situ bleaching of the colorants formulated in the textile fibres and collection of signals. The disadvantage of Raman imaging such as the short focusing/working distance is also presented and discussed. Overall, the Raman imaging can extract meaningful information from the complex shower debris samples to enable analysis of microplastics.