1
|
Rathinamoorthy R, Logitha N, Jordan J, Shriniha PK, Sujitha R. Mitigation of microfibers in laundry effluent: Investigation of luffa fibers as an eco-friendly filtration system. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2025; 375:124251. [PMID: 39862812 DOI: 10.1016/j.jenvman.2025.124251] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/20/2024] [Revised: 12/07/2024] [Accepted: 01/19/2025] [Indexed: 01/27/2025]
Abstract
Domestic laundry wastewater is a major contributor to microfiber emissions in the aquatic environment. Among several mitigation measures, the use of external filters to capture microfibers from wastewater is one of the most efficient and commercially viable methods. This study attempted to develop an eco-friendly filtration medium to filter microfibers in laundry wastewater using luffa cylindrica fibers. Sourced luffa fibers were made into tight rolls and stacked in a filtration column to filter the effluent. The analysis showed that the alkali-treated luffa fiber rolls were more effective in filtering the microfibers than untreated luffa fibers. Hence, the alkali treatment process was optimized for better performance; an alkali concentration of 5.8%, treatment time of 5 h, and 37 °C temperature provide better performance. The characterization of alkali-treated luffa fibers showed significant changes in the morphology and removal of lignin and hemicellulose components, enhancing the physical adsorption of microfibers on the surface. The experimental filtration results showed that the developed filter can effectively remove up to 93% of microfibers from laundry effluent, and the efficiency remained superior for up to 15 filtrations. Furthermore, an increase in filtration leads to the accumulation of detergents in the luffa net-like vascular structure and reduced effectiveness. The use of the developed product in a real-time washing machine outlet was found to be effective with an efficiency of 98%. The developed product is a versatile and cost-effective solution, suitable for use in domestic washing machines. Its simplicity and ease of integration make it an effective and eco-friendly alternative for filtering microfibers from laundry effluent. The future direction of the study also suggests a sustainable disposal method for luffa fibers using it as a matrix material in red soil-based thermal or sound insulation panels and restricting the reach of microfibers into the environment.
Collapse
Affiliation(s)
- R Rathinamoorthy
- Fashion Institute of Technology, Vellore Institute of Technology, Chennai Campus, Chennai, 600127, India.
| | - N Logitha
- Department of Fashion Technology, PSG College of Technology, Coimbatore, 641004, India
| | - J Jordan
- Department of Fashion Technology, PSG College of Technology, Coimbatore, 641004, India
| | - P K Shriniha
- Department of Fashion Technology, PSG College of Technology, Coimbatore, 641004, India
| | - R Sujitha
- Department of Fashion Technology, PSG College of Technology, Coimbatore, 641004, India
| |
Collapse
|
2
|
Panneerselvam D, Murugesan A, Raveendran SK, Kumar JS, Venkataraman P. Examining the hidden dangers: Understanding how microplastics affect pregnancy. Eur J Obstet Gynecol Reprod Biol 2025; 304:53-62. [PMID: 39580908 DOI: 10.1016/j.ejogrb.2024.11.024] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/22/2024] [Revised: 11/08/2024] [Accepted: 11/18/2024] [Indexed: 11/26/2024]
Abstract
Microplastics, a fast-growing environmental concern, play a crucial role in developing the major pollution crisis that affects nearly the entire surface of the planet. Microplastics are tiny particles, measuring less than 5 mm which are ubiquitous, in occurrence, and found in a wide array of products including plastic packaging, synthetic textiles, seafood, fruits, vegetables, salt, sugar, bottled water, and even personal care products. The presence of microplastics in our environment and the potential adverse health effects they may cause have made them a significant perturbation in recent years. Pregnancy is a potentially life-changing experience that entails several apprehensions and new responsibilities for women. For expectant mothers, it is imperative to be aware of the implications of microplastics during pregnancy. One threatened concern is the potential transfer of microplastics across the placenta, which could expose the developing fetus to these particles. Although research on the impact of microplastics on pregnancy is still in its early stages, preliminary findings indicate potential risks that expectant mothers should be aware of. The timing of exposure during pregnancy may play a significant role in the potential risks associated with these tiny particles. In this review, we will delve into the topic, exploring how microplastics enter the body and the potential mechanism by which they pose risks to pregnancy outcomes.
Collapse
Affiliation(s)
- Deboral Panneerselvam
- Department of Obstetrics and Gynaecology, SRM Medical College Hospital and Research Centre, SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India
| | - Anuradha Murugesan
- Department of Obstetrics and Gynaecology, SRM Medical College Hospital and Research Centre, SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India.
| | - Sajeetha Kumari Raveendran
- Department of Obstetrics and Gynaecology, SRM Medical College Hospital and Research Centre, SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India
| | - Janardanan Subramonia Kumar
- Department of General Medicine, SRM Medical College Hospital and Research Centre, SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India
| | - P Venkataraman
- Department of Medical Research, SRM Medical College Hospital and Research Centre, SRM Institute of Science and Technology, Kattankulathur, India
| |
Collapse
|
3
|
Anyame Bawa S, Chan A, Wrobel-Tobiszewska A, Hardie M, Towns C. A review of methods for mitigating microplastic contamination in biosolids from wastewater treatment plants before agricultural soil application. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 957:177360. [PMID: 39515387 DOI: 10.1016/j.scitotenv.2024.177360] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/19/2024] [Revised: 10/17/2024] [Accepted: 10/31/2024] [Indexed: 11/16/2024]
Abstract
Wastewater treatment plants (WWTP) are recognized as major sources of microplastic (MP) particles in terrestrial environments, particularly in agricultural soils through biosolids application. While many reviews have focused on the distribution, detection, and mitigation of MPs in wastewater effluent to limit their discharge into oceans, our understanding of methods to mitigate biosolid contamination remains limited. This review focuses on methods for mitigating MPs contamination in biosolids at various intervention points, including sources, WWTP including the primary and secondary treatment stages where sludge is generated, and post-contamination. These methods are categorized as physical, physicochemical, and biological approaches, and their advantages and limitations are discussed. For instance, physicochemical methods, especially froth flotation, are cost-effective but are hindered by contaminants and reagents. Physical methods like microfibre filtration devices (MFD) are safe but their efficiency depends on the filter pore size and design. Biological methods, particularly microbial degradation, are limited by the varying efficiencies of microorganisms in breaking down MPs and the extended time required for their effective degradation. Other physical methods including dissolved air flotation, and ultrasonication already exist in WWTPs but may require retrofitting or optimization to enhance MP removal from biosolids. As each method inherently has limitations, the key to achieving MP-free biosolids, and thus preventing their release into agricultural soil, lies in integrating these methods through multi-coupling strategies.
Collapse
Affiliation(s)
| | - Andrew Chan
- School of Engineering, University of Tasmania, Australia
| | | | - Marcus Hardie
- Tasmania Institute of Agriculture (TIA), University of Tasmania, Australia
| | - Carmel Towns
- School of Engineering, University of Tasmania, Australia
| |
Collapse
|
4
|
Büngener L, Galvão A, Postila H, Heiderscheidt E. Microplastic retention in green walls for nature-based and decentralized greywater treatment. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 363:125047. [PMID: 39357553 DOI: 10.1016/j.envpol.2024.125047] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/28/2024] [Revised: 08/30/2024] [Accepted: 09/29/2024] [Indexed: 10/04/2024]
Abstract
In wastewater treatment, two issues have recently received increased attention: nature-based solutions for addressing urban water stress through decentralized treatment and re-use; and emerging pollutants such as microplastics (MPs). At the interface of these, this study investigated living green walls for greywater treatment and their potential for MP removal. A large, pilot-scale green wall was irrigated with greywater (a mix of water collected from laundry, dishwasher, bathroom sinks, and synthetic greywater), and effluent from planted and unplanted sections was compared. MPs >50 μm were analyzed using μRaman spectroscopy and supplementary fluorescence microscopy imaging. The green wall proved efficient for the reduction of chemical oxygen demand (COD) (around 80%), removal of total suspended solids (TSS) (around 90%) and MPs, especially for MPs of the non-polar, hydrophobic polymer type polystyrene and MPs sized 100-500 μm. MP removal was improved in the planted (50-60%) compared to the unplanted section (20%), especially for the size fraction 100-500 μm. Physical filtration by the green wall growing media (a mix of perlite with a grain size of 1-5 mm, and coconut fiber), which was further enhanced by plant roots decreasing the effective pore size, can be considered the most important removal mechanism. Charge-mediated adsorption cannot be expected as MPs and growing media mix were both negatively charged at the prevailing water pH (7-8). Fluorescence imaging for MP analysis, using a merged UV/blue light fluorograph, overestimated MP concentrations in greywater (hundreds of MPs per sample were identified by fluorescence imaging versus tens of MPs by μRaman spectroscopy) and would benefit from further improvement before it can be reliably applied as a cheaper and faster alternative methodology for MP analysis.
Collapse
Affiliation(s)
- Lina Büngener
- Water, Energy and Environmental Engineering, Faculty of Technology, 90014, University of Oulu, Finland.
| | - Ana Galvão
- CERIS, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001, Lisbon, Portugal
| | - Heini Postila
- Water, Energy and Environmental Engineering, Faculty of Technology, 90014, University of Oulu, Finland
| | - Elisangela Heiderscheidt
- Water, Energy and Environmental Engineering, Faculty of Technology, 90014, University of Oulu, Finland
| |
Collapse
|
5
|
Frost H, Bond T, Sizmur T, Felipe-Sotelo M. Sorption of metal ions onto PET-derived microplastic fibres. ENVIRONMENTAL SCIENCE. PROCESSES & IMPACTS 2024; 26:2309-2319. [PMID: 39555912 DOI: 10.1039/d4em00373j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/19/2024]
Abstract
This study investigated microplastic polyester fibres representative of those shed during laundering as sorbents for metal ions. During sewage distribution and treatment, microplastics are exposed to elevated concentrations of metal ions, typically for several days. Cryogenic milling was used to generate polyethylene terephthalate (PET) fibres. Characterisation using optical microscopy and Raman spectroscopy revealed that milling did not cause significant chemical alteration to the fibres. Milled fibres were subsequently assessed in screening tests for their capacity to retain 12 metal ions-Sb(III), As(III), Cd(II), Cr(VI), Cu(II), Co(II), Pb(II), Hg(II), Mo(VI), Ni(II), V(V) and Zn(II)-at pH 8. All metal ions were sorbed onto PET fibres. The highest distribution coefficient (Kd) was observed for Pb2+ (939 mL g-1), followed by Cd2+ (898 mL g-1), Cu2+ (507 mL g-1), Hg2+ (403 mL g-1), and Zn2+ (235 mL g-1). The extent of sorption is largely explicable by electrostatic interactions between the PET surface (1.95 point of zero net charge) and the predicted metal ion species. The sorption behaviour of Cd2+ and Hg2+ was examined in more detail since both showed high sorption capacity and are highly toxic. Kinetic experiments revealed that the sorption of both elements was relatively fast, with a steady state reached within six hours. Experimental data from isotherm tests fitted well to the Langmuir sorption model and demonstrated that PET fibres had a much greater sorption capacity for Hg2+ (17.3-23.1 μg g-1) than for Cd2+ (4.3-5.3 μg g-1). Overall, the results indicate that retention of metal ions onto PET fibres originating from laundry is expected during full-scale sewage treatment, which facilitates the subsequent transfer of metals into the terrestrial environment, given that sewage sludge is commonly applied to agricultural land.
Collapse
Affiliation(s)
- H Frost
- School of Chemistry and Chemical Engineering, University of Surrey, Guildford, Surrey GU2 7XH, UK.
- School of Civil Engineering and Surveying, University of Portsmouth, Portland Building, Portland Street, Portsmouth PO1 3AH, UK
| | - T Bond
- School of Sustainability, Civil and Environmental Engineering, University of Surrey, Guildford, GU2 7XH, UK
- Water Research Centre, Frankland Rd, Swindon SN5 8YF, UK
| | - T Sizmur
- Department of Geography and Environmental Science, University of Reading, Reading, RG6 6DW, UK
| | - M Felipe-Sotelo
- School of Chemistry and Chemical Engineering, University of Surrey, Guildford, Surrey GU2 7XH, UK.
| |
Collapse
|
6
|
Tedesco MC, Fisher RM, Stuetz RM. Emission of fibres from textiles: A critical and systematic review of mechanisms of release during machine washing. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 955:177090. [PMID: 39461516 DOI: 10.1016/j.scitotenv.2024.177090] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/31/2024] [Revised: 09/25/2024] [Accepted: 10/18/2024] [Indexed: 10/29/2024]
Abstract
Research about health and environmental impacts of pollution caused by natural and plastic fibres is increasing, however, the role of textile characteristics in microfibre release during washing remains poorly understood. Given that machine washing is thought to be the main contributor to microfibre pollution, we systematically and critically reviewed previous publications looking at how textile features affect fibre emissions during washing. We examined the evidence related to findings from previous studies based on their research aims, ability to control variables that could confound results, use of procedural blanks and controls, and statistical methodologies. We observed that small-scale laboratory equipment frequently used to evaluate microfibre release (e.g. Gyrowash) generates significantly more fibres than domestic washing machines and should not be used to generate environmental estimations. Our findings have implications for ecotoxicology and risk assessment, particularly regarding the overlooked role of natural and cellulosic fibres. While synthetic fibres are widely recognised as the dominant form of microplastic in the environment, environmental surveys often report larger numbers of natural and cellulosic fibres. These fibres, however, account for only 18 % of those tested in the experiments analysed, indicating the need for further research to understand the underlying causes of their release. We concluded that although many textile characteristics are perceived as having an impact on fibre release, 81 % of studies failed to demonstrate clear evidence of the findings associated with such impacts. This work highlights the need for robust experiments to clarify these gaps, which could then allow the development of textiles with minimised shedding potential. We propose a stepwise approach to first build a foundational understanding of how individual washing parameters and textile features influence fibre release, followed by exploring the complexity of how the interaction between these variables impacts emissions.
Collapse
Affiliation(s)
- Marina C Tedesco
- School of Civil and Environmental Engineering, UNSW Sydney, NSW 2052, Australia
| | - Ruth M Fisher
- School of Civil and Environmental Engineering, UNSW Sydney, NSW 2052, Australia.
| | - Richard M Stuetz
- School of Civil and Environmental Engineering, UNSW Sydney, NSW 2052, Australia
| |
Collapse
|
7
|
Šaravanja A, Pušić T, Volmajer Valh J, Dekanić T. Aging and Modified Washing Process for Polyester Fabrics-Environmental Impact. Polymers (Basel) 2024; 16:3238. [PMID: 39683983 DOI: 10.3390/polym16233238] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/29/2024] [Revised: 11/14/2024] [Accepted: 11/20/2024] [Indexed: 12/18/2024] Open
Abstract
Aging and washing factors have a direct influence on changing the properties of textile products, e.g., causing a release of textile fragments in the washing process. In this study, polyester fabrics were exposed to artificial aging under controlled conditions. Using a modified washing process, polyester fabrics were subjected to 10 washing cycles before and after the aging process. To monitor the influence of aging and the modified washing process on the polyester fabrics, the physical, structural and morphological properties of the fabrics and the composition of the collected wastewater were analyzed. The results indicate a slight degradation and increased defragmentation of the polyester fabric due to the processes used. Aging caused the phenomenon of "annealing", photo-oxidative degradation, and the local thickening of the individual fibers. Aging and washing processes influence the change in tensile strength properties. An analysis of zeta potential and BET results confirmed that the aging process results in surface modifications that depend on the time of exposure. The physico-chemical characterization and microscopic analysis of the wastewater revealed various fragments and short, detached fibrils. The results confirmed that both aging and washing significantly affect the properties of polyester fabrics and the composition of the wastewater resulting from the washing process. The relevance of this research to environmental matters is emphasized through the parameters chosen, which reveal the influence of aging on polyester fabric characteristics and the contamination detected in wash wastewater. In conclusion, several avenues for future research have been identified, including lowering washing temperatures, choosing more appropriate detergents, and adjusting standard washing protocols.
Collapse
Affiliation(s)
- Ana Šaravanja
- Faculty of Textile Technology, University of Zagreb, HR-10000 Zagreb, Croatia
| | - Tanja Pušić
- Faculty of Textile Technology, University of Zagreb, HR-10000 Zagreb, Croatia
| | - Julija Volmajer Valh
- Faculty of Mechanical Engineering, University of Maribor, SI-2000 Maribor, Slovenia
| | - Tihana Dekanić
- Faculty of Textile Technology, University of Zagreb, HR-10000 Zagreb, Croatia
| |
Collapse
|
8
|
Alex RK, Muhammed TM, Kannankai MP, Radhakrishnan A, Borah A, Reghuvaran A, Devipriya SP. Microfiber pollution: Assessment, emission estimation, and time-series-based forecast of microfibers from domestic washing machine laundering and mitigation measures. INTEGRATED ENVIRONMENTAL ASSESSMENT AND MANAGEMENT 2024; 20:2116-2127. [PMID: 39185940 DOI: 10.1002/ieam.4985] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/03/2024] [Revised: 07/06/2024] [Accepted: 07/16/2024] [Indexed: 08/27/2024]
Abstract
Microfibers are thread-like structures shorter than 5 mm and have natural, semisynthetic, or synthetic origins. These micropollutants are ubiquitous and are emerging in the environment, living organisms, and food sources. Textile laundering is a prominent source of microfibers, but limited research has been conducted on microfiber pollution from domestic washing machines in emerging economies such as India, where consumption and production rates are exorbitantly high. This study aimed to assess the abundance and size distribution of microfibers from the effluent of a semiautomatic domestic washing machine using three categories of "not-new" textiles: cotton, blended, and synthetic under "with" and "without" detergent conditions. Although most Indians still rely on hand washing, this study focused on washing machines due to their increasing use in India driven by improving socioeconomic factors. This study also developed annual emission estimation and forecasting models for India to understand pollution trends. The results revealed that microfibers were highly abundant in washing machine effluent, with a mean abundance of cotton, blended, and synthetic in "with detergent" conditions of 6476.67, 3766.67, and 8645/L, respectively, whereas in "without detergent," it was lower. All identified microfibers were divided into five size classes. The study also found that powdered detergent increased the abundance and emission of tiny fibers. The overall annual emissions estimate was 1.23 × 1011 microfibers, with cotton, synthetic, and blended categories accounting for 2.11 × 1010, 1.40 × 1010, and 6.15 × 109 microfibers, respectively. Time-series-based future estimates (autoregressive integrated moving average [ARIMA] and error-trend-seasonality [ETS]) showed an alarming increase in microfiber emissions, with forecasted annual emission reaching 1.90 × 1011 by 2030. Synthetic and cotton textiles are the most significant contributors to microfiber pollution. This study emphasized the urgent need to address the issue of microfiber pollution caused by washing machine laundering in developing countries, such as India, where sociodemographic factors intensify the problem. Integr Environ Assess Manag 2024;20:2116-2127. © 2024 SETAC.
Collapse
Affiliation(s)
- Riya Kumbukattu Alex
- School of Environmental Studies, Cochin University of Science and Technology, Cochin, India
| | | | | | - Amal Radhakrishnan
- School of Environmental Studies, Cochin University of Science and Technology, Cochin, India
| | - Abhinab Borah
- School of Environmental Studies, Cochin University of Science and Technology, Cochin, India
| | - Abesh Reghuvaran
- Centre for Science in Society, Cochin University of Science and Technology, Cochin, India
| | | |
Collapse
|
9
|
Liu S, Liu S, Xiao X, Liu L, Peijnenburg W, Xu Y, Wang Y, Yu Y, Li L, She X. Fibrous microplastics in the environment: Sources, occurrence, impacts, and mitigation strategies. AQUATIC TOXICOLOGY (AMSTERDAM, NETHERLANDS) 2024; 276:107119. [PMID: 39437451 DOI: 10.1016/j.aquatox.2024.107119] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/23/2024] [Revised: 09/04/2024] [Accepted: 09/28/2024] [Indexed: 10/25/2024]
Abstract
Fibrous microplastics (FMPs), a unique class of microplastics, are increasingly recognized as a significant environmental threat due to their ubiquitous presence and potential risks to ecological and human health. This review provides a comprehensive overview of FMPs, including their sources, prevalence in various environmental media, and potential impacts. FMPs, which can be found in over 90 % of certain environmental samples, originate from a diverse range of sources, including synthetic textiles, landfill waste, industrial emissions, and atmospheric deposition. These persistent pollutants pose a threat to both terrestrial and marine ecosystems. Their insidious presence can lead to ingestion by organisms, potentially disrupting ecosystems and posing risks to human health. Addressing the challenge of FMPs requires a multi-faceted approach. Reducing the production and use of synthetic fibers, implementing effective waste management practices, and developing new technologies to remove FMPs from wastewater and the broader environment are all crucial components of the solution. However, further research is essential to fully understand the long-term implications of FMPs on ecosystems and human health, laying the foundation for the development of robust and effective mitigation strategies.
Collapse
Affiliation(s)
- Shaochong Liu
- College of Environmental Sciences and Engineering, Qingdao University, Qingdao, 266071, China
| | - Sizhi Liu
- College of Environmental Sciences and Engineering, Qingdao University, Qingdao, 266071, China
| | - Xiangyang Xiao
- College of Resources and Environment, National Engineering Laboratory for Efficient Utilization of Soil and Fertilizer Resources, Shandong Agricultural University, Tai'an 271018, China
| | - Lu Liu
- College of Environmental Sciences and Engineering, Qingdao University, Qingdao, 266071, China
| | - Willie Peijnenburg
- Institute of Environmental Sciences (CML), Leiden University, RA Leiden 2300, the Netherlands; National Institute of Public Health and the Environment (RIVM), Center for Safety of Substances and Products, P.O. Box 1, Bilthoven, the Netherlands
| | - Yan Xu
- College of Environmental Sciences and Engineering, Qingdao University, Qingdao, 266071, China
| | - Yanhao Wang
- College of Environmental Sciences and Engineering, Qingdao University, Qingdao, 266071, China
| | - Yaqi Yu
- College of Environmental Sciences and Engineering, Qingdao University, Qingdao, 266071, China
| | - Lianzhen Li
- College of Environmental Sciences and Engineering, Qingdao University, Qingdao, 266071, China.
| | - Xilin She
- College of Environmental Sciences and Engineering, Qingdao University, Qingdao, 266071, China.
| |
Collapse
|
10
|
Allison T, Ward BD, Durance I, Harbottle M. Predicting flushed wet wipe emissions into rivers. WATER RESEARCH 2024; 268:122733. [PMID: 39509766 DOI: 10.1016/j.watres.2024.122733] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/23/2024] [Revised: 10/07/2024] [Accepted: 10/31/2024] [Indexed: 11/15/2024]
Abstract
Flushed wet wipes pose a significant pollution risk to river systems at both macro and micro levels. However, the link between their emissions and environmental contamination remains unclear. Here we integrated emissions-based modelling with existing data on wet wipe disposal and microfibre generation to predict the quantity of emissions entering river systems and the transport pathways involved. Results indicate that wastewater pathways, including sewer overflows, wastewater treatment plants, and agricultural runoff, are major conduits for these pollutants. Despite advanced wastewater treatment, substantial microfibre emissions still enter the environment. Extrapolating to larger scales reveals wet wipe pollution as an international issue requiring urgent attention. This research offers a comprehensive modelling framework applicable to various wastewater pollutants, providing valuable insights for policymakers and the water industry. Improved data on wet wipe disposal, fate, and spatially distributed wastewater systems are necessary to pinpoint their environmental risks more accurately.
Collapse
Affiliation(s)
- Thomas Allison
- School of Biosciences and Water Research Institute, Cardiff University, Cardiff, CF10 3AX, United Kingdom
| | - Benjamin D Ward
- School of Chemistry, Cardiff University, Cardiff, CF10 3AT, United Kingdom
| | - Isabelle Durance
- School of Biosciences and Water Research Institute, Cardiff University, Cardiff, CF10 3AX, United Kingdom
| | - Michael Harbottle
- School of Engineering, Cardiff University, Cardiff, CF24 3AA, United Kingdom.
| |
Collapse
|
11
|
Walsh LJ. Reusable Personal Protective Equipment Viewed Through the Lens of Sustainability. Int Dent J 2024; 74 Suppl 2:S446-S454. [PMID: 39515932 PMCID: PMC11583863 DOI: 10.1016/j.identj.2024.07.1270] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/05/2024] [Accepted: 07/28/2024] [Indexed: 11/16/2024] Open
Abstract
From early 2020 the COVID-19 pandemic drove dramatic increases in the production and use of single use disposable masks, respirators and gowns, and highlighted the vulnerability of supply chains for these items. This paper explores the impacts of the rising demands for these single use items through the lens of sustainability, by collating data on the carbon footprint and other impacts, and then discussing challenges, solutions, and future perspectives. Polypropylene and other key synthetic fibre components of these items are not biodegradable, and persist in the environments for prolonged periods generating microplastics as they degrade slowly. Various methods have been shown to allow limited repeated use of surgical masks and respirators, and this has spurred the development of masks and respirators designed for many cycles of reuse. Parallel discussions around gowns reveal that reuseable gowns offer many advantages for performance as well as reduced environmental impact. At the local dental clinic level, those making purchasing decisions should consider impacts of their product choices on the environment. Such impacts occur from manufacture, transport, and disposal of PPE, and from degradation within the environment. Regulators need to encourage use of reuseable items and facilitate this through local guidelines, while at the international level, more work is needed to develop uniform standards for reuseable masks, respirators and gowns.
Collapse
Affiliation(s)
- Laurence J Walsh
- School of Dentistry, The University of Queensland, Brisbane, Australia.
| |
Collapse
|
12
|
Akyildiz SH, Fiore S, Bruno M, Sezgin H, Yalcin-Enis I, Yalcin B, Bellopede R. Release of microplastic fibers from synthetic textiles during household washing. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 357:124455. [PMID: 38942274 DOI: 10.1016/j.envpol.2024.124455] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/28/2023] [Revised: 02/29/2024] [Accepted: 06/25/2024] [Indexed: 06/30/2024]
Abstract
Textile materials are one of the primary sources of microplastic pollution. The washing procedure is by far the most significant way that textile products release microplastic fibers (MPFs). Therefore, in this study, the effects of various textile raw materials (A acrylic, PA polyamide, PET polyester, RPET recycled polyester and PP polypropylene), fabric construction properties (woven, knitted), thickness and basis weight values on MPFs release at different washing stages (pre-washing, soaping/rinsing) were examined separately. To mimic the most popular home washing procedures, a 10-min pre-wash and a 35-min soaping/rinsing phase at 40 °C were selected for the washing procedure. Utilizing the Image J program on macroscopic images captured by a high-resolution SL. R camera, the microfibers collected by filtering the water have been visually counted. According to the results, knitted fabrics released fewer MPFs than woven fabrics, with the woven acrylic sample (A3-w) exhibiting the highest release (2405 MPFs). The number of MPFs increased along with the thickness and weight of the fabric. Recycled polyester was found to release more MPFs than virgin polyester under the same conditions (1193 MPFs vs. 908 MPFs). This study demonstrates how recycled polyester, although initially an environmentally beneficial solution, can eventually become detrimental to the environment. Furthermore, it is known that the pre-washing procedure-which is optional-releases a lot more MPFs than the soaping and rinsing procedures, and that stopping this procedure will drastically lower the amount of MPFs incorporated into the water.
Collapse
Affiliation(s)
- Sinem Hazal Akyildiz
- Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino, Torino, Italy; Department of Textile Engineering, Istanbul Technical University, Istanbul, Turkey; Department of Textile Engineering, Marmara University, Istanbul, Turkey
| | - Silvia Fiore
- Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino, Torino, Italy.
| | - Martina Bruno
- Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino, Torino, Italy
| | - Hande Sezgin
- Department of Textile Engineering, Istanbul Technical University, Istanbul, Turkey
| | - Ipek Yalcin-Enis
- Department of Textile Engineering, Istanbul Technical University, Istanbul, Turkey
| | - Bahattin Yalcin
- Department of Inorganic Chemistry, Marmara University, Istanbul, Turkey
| | - Rossana Bellopede
- Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino, Torino, Italy
| |
Collapse
|
13
|
Yuan W, Xu EG, Shabaka S, Chen P, Yang Y. The power of green: Harnessing phytoremediation to combat micro/nanoplastics. ECO-ENVIRONMENT & HEALTH 2024; 3:260-265. [PMID: 39234422 PMCID: PMC11372594 DOI: 10.1016/j.eehl.2024.04.001] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/04/2023] [Revised: 02/07/2024] [Accepted: 04/02/2024] [Indexed: 09/06/2024]
Abstract
Plastic pollution and its potential risks have been raising public concerns as a global environmental issue. Global plastic waste may double by 2030, posing a significant challenge to the remediation of environmental plastics. In addition to finding alternative products and managing plastic emission sources, effective removal technologies are crucial to mitigate the negative impact of plastic pollution. However, current remediation strategies, including physical, chemical, and biological measures, are unable to compete with the surging amounts of plastics entering the environment. This perspective lays out recent advances to propel both research and action. In this process, phytoaccumulation, phytostabilization, and phytofiltration can be applied to reduce the concentration of nanoplastics and submicron plastics in terrestrial, aquatic, and atmospheric environments, as well as to prevent the transport of microplastics from sources to sinks. Meanwhile, advocating for a more promising future still requires significant efforts in screening hyperaccumulators, coupling multiple measures, and recycling stabilized plastics from plants. Phytoremediation can be an excellent strategy to alleviate global micro/nanoplastic pollution because of the cost-effectiveness and environmental sustainability of green technologies.
Collapse
Affiliation(s)
- Wenke Yuan
- Hubei Key Laboratory of Wetland Evolution & Ecological Restoration, Wuhan Botanical Garden, Chinese Academy of Sciences, Wuhan 430074, China
- Key Laboratory of Lake and Watershed Science for Water Security, Nanjing Institute of Geography and Limnology, Chinese Academy of Sciences, Nanjing 210008, China
- Danjiangkou Wetland Ecosystem Field Scientific Observation and Research Station, Chinese Academy of Sciences & Hubei Province, Wuhan 430074, China
| | - Elvis Genbo Xu
- Department of Biology, University of Southern Denmark, Odense 5230, Denmark
| | - Soha Shabaka
- National Institute of Oceanography and Fisheries, Cairo 11516, Egypt
| | - Peng Chen
- Hubei Key Laboratory of Wetland Evolution & Ecological Restoration, Wuhan Botanical Garden, Chinese Academy of Sciences, Wuhan 430074, China
- Key Laboratory of Lake and Watershed Science for Water Security, Nanjing Institute of Geography and Limnology, Chinese Academy of Sciences, Nanjing 210008, China
- Danjiangkou Wetland Ecosystem Field Scientific Observation and Research Station, Chinese Academy of Sciences & Hubei Province, Wuhan 430074, China
| | - Yuyi Yang
- Hubei Key Laboratory of Wetland Evolution & Ecological Restoration, Wuhan Botanical Garden, Chinese Academy of Sciences, Wuhan 430074, China
- Key Laboratory of Lake and Watershed Science for Water Security, Nanjing Institute of Geography and Limnology, Chinese Academy of Sciences, Nanjing 210008, China
- Danjiangkou Wetland Ecosystem Field Scientific Observation and Research Station, Chinese Academy of Sciences & Hubei Province, Wuhan 430074, China
| |
Collapse
|
14
|
Snekkevik VK, Cole M, Gomiero A, Haave M, Khan FR, Lusher AL. Beyond the food on your plate: Investigating sources of microplastic contamination in home kitchens. Heliyon 2024; 10:e35022. [PMID: 39170486 PMCID: PMC11336334 DOI: 10.1016/j.heliyon.2024.e35022] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2024] [Revised: 07/22/2024] [Accepted: 07/22/2024] [Indexed: 08/23/2024] Open
Abstract
Given that a substantial amount of time is spent in kitchens preparing food, the kitchen equipment used may be relevant in determining the composition and amount of microplastics ending up on our dinner plate. While previous research has predominantly focused on foodstuffs as a source of microplastics, we emphasise that micro- and nanoplastics are ubiquitous and likely originate from diverse sources. To address the existing knowledge gap regarding additional sources contributing to microplastics on our dinner plates, this review investigates various kitchen processes, utensils and equipment (excluding single-use items and foodstuffs) to get a better understanding of potential microplastic sources within a home kitchen. Conducting a narrative literature review using terms related to kitchenware and kitchen-affiliated equipment and processes, this study underscores that the selection of preparation tools, storage, serving, cooking, and cleaning procedures in our kitchens may have a significant impact on microplastic exposure. Mechanical, physical, and chemical processes occurring during food preparation contribute to the release of microplastic particles, challenging the assumption that exposure to microplastics in food is solely tied to food products or packaging. This review highlights diverse sources of microplastics in home kitchens, posing concerns for food safety and human health.
Collapse
Affiliation(s)
| | - Matthew Cole
- Marine Ecology & Biodiversity, Plymouth Marine Laboratory (PML), Plymouth, PL1 3DH, UK
| | - Alessio Gomiero
- Norwegian Research Centre (NORCE), Department of Climate & Environment, Mekjarvik 12, 4072, Randaberg, Norway
| | - Marte Haave
- SALT Lofoten AS, Pb. 91, Fiskergata 23, 8301, Svolvær, Norway
- Norwegian Research Centre (NORCE), Department of Climate & Environment, Nygårdsgt 112, 5008, Bergen, Norway
| | - Farhan R. Khan
- Norwegian Research Centre (NORCE), Department of Climate & Environment, Nygårdsgt 112, 5008, Bergen, Norway
| | - Amy L. Lusher
- Norwegian Institute for Water Research (NIVA), Oslo, Norway
| |
Collapse
|
15
|
Lahiri SK, Azimi Dijvejin Z, Gholamreza F, Shabanian S, Khatir B, Wotherspoon L, Golovin K. Liquidlike, Low-Friction Polymer Brushes for Microfibre Release Prevention from Textiles. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2400580. [PMID: 38529758 DOI: 10.1002/smll.202400580] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/24/2024] [Revised: 03/12/2024] [Indexed: 03/27/2024]
Abstract
During synthetic textile washing, rubbing between fibres or against the washing machine, exacerbated by the elevated temperature, initiates the release of millions of microplastic fibres into the environment. A general tribological strategy is reported that practically eliminates the release of microplastic fibres from laundered apparel. The two-layer fabric finishes combine low-friction, liquidlike polymer brushes with "molecular primers", that is, molecules that durably bond the low-friction layers to the surface of the polyester or nylon fabrics. It is shown that when the coefficient of friction is below a threshold of 0.25, microplastic fibre release is substantially reduced, by up to 96%. The fabric finishes can be water-wicking or water-repellent, and their comfort properties are retained after coating, indicating a tunable and practical strategy toward a sustainable textile industry and plastic-free oceans and marine foodstuffs.
Collapse
Affiliation(s)
- Sudip Kumar Lahiri
- Department of Mechanical & Industrial Engineering, University of Toronto, Toronto, ON, M5S 3G8, Canada
| | - Zahra Azimi Dijvejin
- Department of Mechanical & Industrial Engineering, University of Toronto, Toronto, ON, M5S 3G8, Canada
| | - Farzan Gholamreza
- School of Engineering, University of British Columbia, Kelowna, BC, V1V 1V7, Canada
| | - Sadaf Shabanian
- Department of Mechanical & Industrial Engineering, University of Toronto, Toronto, ON, M5S 3G8, Canada
- School of Engineering, University of British Columbia, Kelowna, BC, V1V 1V7, Canada
| | - Behrooz Khatir
- Department of Mechanical & Industrial Engineering, University of Toronto, Toronto, ON, M5S 3G8, Canada
| | - Lauren Wotherspoon
- Department of Materials Science & Engineering, University of Toronto, Toronto, ON, M5S 3G8, Canada
| | - Kevin Golovin
- Department of Mechanical & Industrial Engineering, University of Toronto, Toronto, ON, M5S 3G8, Canada
- Department of Materials Science & Engineering, University of Toronto, Toronto, ON, M5S 3G8, Canada
| |
Collapse
|
16
|
Tserendorj D, Illés Á, Károly Á, Stadler-Szalai R, Sandil S, Mireisz T, Dobosy P, Pomázi F, Baranya S, Adányi M, Záray G. Microfiber emission from a municipal wastewater treatment plant in Hungary. Sci Rep 2024; 14:12041. [PMID: 38802478 PMCID: PMC11130252 DOI: 10.1038/s41598-024-62817-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/24/2023] [Accepted: 05/21/2024] [Indexed: 05/29/2024] Open
Abstract
Since the ingestion of both natural and anthropogenic microfibers produces a deleterious effect on aquatic organisms, it is crucial to explore the emission of these pollutants by WWTPs into the receiving water bodies, such as rivers. Cellulose- and petroleum-based microfibers, as well as microplastic particles, were collected from the effluent of a municipal WWTP operating with activated sludge technology in Budapest, Hungary. During two sampling campaigns organized in February and April of 2023 on different working days and at different times of the day, 123-145 L of effluent was sieved and filtered. The organic matter was removed by hydrogen-peroxide treatment. All fibers and particles larger than 10 µm were counted, and using a fluorescence microscope, the fibers were geometrically characterized in terms of length and diameter. Each fiber was individually identified by transflection-FT-IR method. The fiber concentration varied in the range of 1.88-2.84 and 4.25-6.79 items/L during the 7th and the 16th week of 2023, respectively. In February and April, the proportion of microfibers in the solid particles was 78.3 and 94.7%, respectively. In the effluent the cellulose-based microfibers were dominant (53-91%), while among the petroleum-based microfibers, polyester occurred most often. The median length of cellulose-based fibers was considerably higher in April than in February (650 vs. 1250 µm), and simultaneously the median diameter also increased from 21 to 29 µm. This behaviour was also seen, albeit to a lesser extent, in connection to microfibers derived from petroleum. The treated wastewater's daily microfiber transport to the Danube River varied between 0.44 - 0.69 and 0.94-1.53 billion in February and April 2023, respectively.
Collapse
Affiliation(s)
- Davaakhuu Tserendorj
- Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina Út 29-31, Budapest, 1113, Hungary
- National Laboratory for Water Science and Water Security, Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina Út 29-31, Budapest, 1113, Hungary
| | - Ádám Illés
- Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina Út 29-31, Budapest, 1113, Hungary
- National Laboratory for Water Science and Water Security, Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina Út 29-31, Budapest, 1113, Hungary
| | - Ágnes Károly
- Hungarian Institute for Forensic Sciences, Mosonyi Str. 9, Budapest, 1087, Hungary
| | - Rita Stadler-Szalai
- Hungarian Institute for Forensic Sciences, Mosonyi Str. 9, Budapest, 1087, Hungary
| | - Sirat Sandil
- Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina Út 29-31, Budapest, 1113, Hungary
- National Laboratory for Water Science and Water Security, Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina Út 29-31, Budapest, 1113, Hungary
| | - Tamás Mireisz
- Doctoral School of Environmental Sciences, Eötvös Loránd University, Pázmány Péter Sétány 1/C, Budapest, 1113, Hungary
| | - Péter Dobosy
- Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina Út 29-31, Budapest, 1113, Hungary
- National Laboratory for Water Science and Water Security, Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina Út 29-31, Budapest, 1113, Hungary
| | - Flóra Pomázi
- Department of Hydraulic and Water Resources Engineering, Faculty of Civil Engineering, Budapest University of Technology and Economics, Műegyetem Rkp. 3, Budapest, 1111, Hungary
- National Laboratory for Water Science and Water Security, Faculty of Civil Engineering, Department of Hydraulic and Water Resources Engineering, Budapest University of Technology and Economics, Műegyetem Rkp. 3, Budapest, 1111, Hungary
| | - Sándor Baranya
- Department of Hydraulic and Water Resources Engineering, Faculty of Civil Engineering, Budapest University of Technology and Economics, Műegyetem Rkp. 3, Budapest, 1111, Hungary
- National Laboratory for Water Science and Water Security, Faculty of Civil Engineering, Department of Hydraulic and Water Resources Engineering, Budapest University of Technology and Economics, Műegyetem Rkp. 3, Budapest, 1111, Hungary
| | - Mónika Adányi
- Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina Út 29-31, Budapest, 1113, Hungary
- Doctoral School of Environmental Sciences, Eötvös Loránd University, Pázmány Péter Sétány 1/C, Budapest, 1113, Hungary
| | - Gyula Záray
- Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina Út 29-31, Budapest, 1113, Hungary.
- National Laboratory for Water Science and Water Security, Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina Út 29-31, Budapest, 1113, Hungary.
- Institute of Chemistry, Eötvös Loránd University, Pázmány Péter Sétány 1/A, Budapest, 1113, Hungary.
| |
Collapse
|
17
|
Büngener L, Schäffer SM, Schwarz A, Schwalb A. Microplastics in a small river: Occurrence and influencing factors along the river Oker, Northern Germany. JOURNAL OF CONTAMINANT HYDROLOGY 2024; 264:104366. [PMID: 38759476 DOI: 10.1016/j.jconhyd.2024.104366] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/11/2024] [Revised: 04/22/2024] [Accepted: 05/13/2024] [Indexed: 05/19/2024]
Abstract
Much attention regarding the environmental pollution by plastics had focused on the Oceans. More recently, contamination of freshwater ecosystems has been addressed but information from smaller rivers in moderately populated catchments is still comparatively scarce. This study explored the microplastic (MP) occurrence in the small regional river Oker, Northern Germany (catchment area 1822 km2, population of ca. 500,000, discharge approx. 12 m3 s-1). MPs (fibers and fragments in the size range 0.3-5 mm, identification by microscopy) were found in all 10 in-stream samples collected along the course of the river, ranging between 28 and 134 particles m-3 with an overall average of 63 particles m-3. This MP concentration found in the small river Oker is similar to, or higher than, that reported for larger rivers in similar environments in Central Europe. On average, higher MP concentration was found at urban (71 particles m-3) compared to rural sampling sites (51 particles m-3). Within the Oker catchment, in-stream MP concentration showed no or low correlation to the catchment-scale factors of catchment size and population. Additional samples taken from three locations directly influenced by discharges of potential MP point sources confirmed wastewater treatment plants of different capacities and an urban rainwater sewer as sources. Our results support findings that MP concentrations in small rivers are crucially influenced by local sources, superimposing linear relationships to factors of catchment size and -population. They show that even small rivers draining moderately populated catchments may exhibit comparatively high concentrations of MPs, and thereby represent underestimated pathways of MP in the environment.
Collapse
Affiliation(s)
- Lina Büngener
- Water, Energy and Environmental Engineering, University of Oulu, Finland.
| | - Sarah-Maria Schäffer
- Institute of Geosystems and Bioindication, Technical University of Braunschweig, Germany
| | - Anja Schwarz
- Institute of Geosystems and Bioindication, Technical University of Braunschweig, Germany
| | - Antje Schwalb
- Institute of Geosystems and Bioindication, Technical University of Braunschweig, Germany
| |
Collapse
|
18
|
Tan H, Othman MHD, Chong WT, Kek HY, Wong SL, Nyakuma BB, Mong GR, Wahab RA, Wong KY. Turning plastics/microplastics into valuable resources? Current and potential research for future applications. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 356:120644. [PMID: 38522274 DOI: 10.1016/j.jenvman.2024.120644] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/27/2023] [Revised: 01/26/2024] [Accepted: 03/10/2024] [Indexed: 03/26/2024]
Abstract
Plastics are a wide range of synthetic or semi-synthetic materials, mainly consisting of polymers. The use of plastics has increased to over 300 million metric tonnes in recent years, and by 2050, it is expected to grow to 800 million. Presently, a mere 10% of plastic waste is recycled, with approximately 75% ended up in landfills. Inappropriate disposal of plastic waste into the environment poses a threat to human lives and marine species. Therefore, this review article highlights potential routes for converting plastic/microplastic waste into valuable resources to promote a greener and more sustainable environment. The literature review revealed that plastics/microplastics (P/MP) could be recycled or upcycled into various products or materials via several innovative processes. For example, P/MP are recycled and utilized as anodes in lithium-ion (Li-ion) and sodium-ion (Na-ion) batteries. The anode in Na-ion batteries comprising PP carbon powder exhibits a high reversible capacity of ∼340 mAh/g at 0.01 A/g current state. In contrast, integrating Fe3O4 and PE into a Li-ion battery yielded an excellent capacity of 1123 mAh/g at 0.5 A/g current state. Additionally, recycled Nylon displayed high physical and mechanical properties necessary for excellent application as 3D printing material. Induction heating is considered a revolutionary pyrolysis technique with improved yield, efficiency, and lower energy utilization. Overall, P/MPs are highlighted as abundant resources for the sustainable production of valuable products and materials such as batteries, nanomaterials, graphene, and membranes for future applications.
Collapse
Affiliation(s)
- Huiyi Tan
- Faculty of Chemical and Energy Engineering, University Teknologi Malaysia, 81310, Skudai, Johor, Malaysia
| | - Mohd Hafiz Dzarfan Othman
- Advanced Membrane Technology Research Centre (AMTEC), Universiti Teknlogi Malaysia, 81310, Skudai, Johor, Malaysia
| | - Wen Tong Chong
- Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia
| | - Hong Yee Kek
- Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310, Skudai, Johor, Malaysia
| | - Syie Luing Wong
- Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, Eindhoven, the Netherlands
| | - Bemgba Bevan Nyakuma
- Department of Chemical Sciences, Faculty of Science and Computing, Pen Resource University, P. M. B. 08, Gombe, Gombe State, Nigeria
| | - Guo Ren Mong
- School of Energy and Chemical Engineering, Xiamen University Malaysia, 43900, Sepang, Selangor, Malaysia
| | | | - Keng Yinn Wong
- Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310, Skudai, Johor, Malaysia; Process Systems Engineering Centre (PROSPECT), Universiti Teknologi Malaysia, 81310, Skudai, Johor, Malaysia.
| |
Collapse
|
19
|
Valdiviezo-Gonzales L, Ortiz Ojeda P, Espinoza Morriberón D, Colombo CV, Rimondino GN, Forero López AD, Fernández Severini MD, Malanca FE, De-la-Torre GE. Influence of the geographic location and house characteristics on the concentration of microplastics in indoor dust. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 917:170353. [PMID: 38296076 DOI: 10.1016/j.scitotenv.2024.170353] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/08/2023] [Revised: 01/17/2024] [Accepted: 01/20/2024] [Indexed: 02/04/2024]
Abstract
Microplastics (MPs) are known for their ubiquity, having been detected in virtually any environmental compartment. However, indoor MPs concentrations are poorly studied despite being closely related to human exposure. The present study aims to evaluate the presence of MPs in settled atmospheric dust in 60 houses distributed in 12 districts of the metropolitan city of Lima, Peru, and investigate the influence of their geographical location and house characteristics. MPs concentration ranged from 0.01 to 33.9 MPs per mg of dust. Fibers and blue were the most frequent shape and color (98 % and 69 %, respectively). Also, 82 % of the particles were between 500 μm - 5 mm in size. A higher concentration of MPs was identified in the center-south of the city. The houses located on the highest floors (levels 4 to 13 to ground) displayed higher concentrations. MPs were primarily composed of polyester (PET), polypropylene (PP), and ethylene-vinyl acetate (EVA), among others. The polymers identified suggest that MPs derived from the fragmentation of components frequently found in houses, such as synthetic clothing, food storage containers, toys, carpets, floors, and curtains. The incorporation of MPs from the outside into dwellings is not ruled out. Future studies should evaluate the influence of consumption habits and housing characteristics on the abundance of MPs.
Collapse
Affiliation(s)
- Lorgio Valdiviezo-Gonzales
- Carrera Profesional de Ingeniería en Seguridad Laboral y Ambiental, Facultad de Ingeniería, Universidad Tecnológica del Perú, Lima, Peru.
| | - Paola Ortiz Ojeda
- Carrera Profesional de Ingeniería en Seguridad Laboral y Ambiental, Facultad de Ingeniería, Universidad Tecnológica del Perú, Lima, Peru
| | - Dante Espinoza Morriberón
- Universidad Tecnológica del Perú (UTP), Facultad de Ingeniería, Jirón Hernán Velarde 260, Cercado de Lima, 15046 Lima, Peru
| | - Carolina V Colombo
- Instituto Argentino de Oceanografía (IADO), CONICET/UNS, CCT-Bahía Blanca, Camino La Carrindanga, km 7.5, Edificio E1, Bahía Blanca B8000FWB, Buenos Aires, Argentina
| | - Guido Noé Rimondino
- Instituto de Investigaciones en Fisicoquímica de Córdoba (INFIQC), Departamento de Fisicoquímica, Facultad de Ciencias Químicas, Universidad Nacional de Córdoba, Ciudad Universitaria, X5000HUA Córdoba, Argentina
| | - Ana D Forero López
- Instituto Argentino de Oceanografía (IADO), CONICET/UNS, CCT-Bahía Blanca, Camino La Carrindanga, km 7.5, Edificio E1, Bahía Blanca B8000FWB, Buenos Aires, Argentina
| | - Melisa D Fernández Severini
- Instituto Argentino de Oceanografía (IADO), CONICET/UNS, CCT-Bahía Blanca, Camino La Carrindanga, km 7.5, Edificio E1, Bahía Blanca B8000FWB, Buenos Aires, Argentina
| | - Fabio Ernesto Malanca
- Instituto de Investigaciones en Fisicoquímica de Córdoba (INFIQC), Departamento de Fisicoquímica, Facultad de Ciencias Químicas, Universidad Nacional de Córdoba, Ciudad Universitaria, X5000HUA Córdoba, Argentina
| | - Gabriel Enrique De-la-Torre
- Grupo de Investigación de Biodiversidad, Medio Ambiente y Sociedad, Universidad San Ignacio de Loyola, Lima, Peru
| |
Collapse
|
20
|
Allen E, Henninger CE, Garforth A, Asuquo E. Microfiber Pollution: A Systematic Literature Review to Overcome the Complexities in Knit Design to Create Solutions for Knit Fabrics. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2024; 58:4031-4045. [PMID: 38381002 PMCID: PMC10919082 DOI: 10.1021/acs.est.3c05955] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/25/2023] [Revised: 02/01/2024] [Accepted: 02/01/2024] [Indexed: 02/22/2024]
Abstract
The absence of standardized procedures to assess microfiber pollution released during laundering, alongside textile complexities, has caused incomparability and inconsistency between published methodologies, data formats, and presentation of findings. Yet, this information needs to be clear and succinct to engage producers and consumers in reducing microfiber pollution through solutions, such as eco-design. This review analyses source directed interventions through design and manufacturing parameters that can prevent or reduce microfiber shedding from knit fabrics during washing. Contradicting results are critically evaluated and future research agendas, alongside potential areas for voluntary and involuntary sustainable incentives are summarized. To do this, a systematic review was carried out, using the PRISMA approach to verify which fabrics had been investigated in terms of microfiber shedding. Using selected keywords, a total number of 32 articles were included in this review after applying carefully developed inclusion and exclusion criteria. The influence of fabric parameters such as fiber polymer, length of fibers and yarn twist alongside fabric construction parameters such as gauge of knit and knit structure are critically evaluated within the systematically selected studies. This review highlights the agreed upon fabric parameters and constructions that can be implemented to reduce microfiber pollution released from knit textiles. The complexities and inconsistencies within the findings are streamlined to highlight the necessary future research agendas. This information is critical to facilitate the adoption of cross-industry collaboration to achieve pollution reduction strategies and policies. We call for more systematic studies to assess the relationship between individual textile parameters and their influence on microfiber shedding. Additionally, studies should work toward standardization to increase comparability between studies and created more comprehensive guidelines for policy development and voluntary actions for the textile and apparel industry to participate in addressing more sustainable practises through eco-design.
Collapse
Affiliation(s)
- Elisabeth Allen
- Department of Materials &
Engineering, University of Manchester, Oxford Road, M13 9PL Manchester, United Kingdom
| | - Claudia E Henninger
- Department of Materials &
Engineering, University of Manchester, Oxford Road, M13 9PL Manchester, United Kingdom
| | - Arthur Garforth
- Department of Materials &
Engineering, University of Manchester, Oxford Road, M13 9PL Manchester, United Kingdom
| | - Edidiong Asuquo
- Department of Materials &
Engineering, University of Manchester, Oxford Road, M13 9PL Manchester, United Kingdom
| |
Collapse
|
21
|
Imbulana S, Tanaka S, Yukioka S, Oluwoye I. Occurrence and distribution of plastic particles (10-25,000 μm) and microfibers in the surface water of an urban river network in Japan. ENVIRONMENTAL MONITORING AND ASSESSMENT 2023; 196:92. [PMID: 38148350 DOI: 10.1007/s10661-023-12221-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/15/2023] [Accepted: 12/07/2023] [Indexed: 12/28/2023]
Abstract
Urban rivers remain the key conduits conveying land-sourced plastics into the ocean. However, detailed information is limited on the concurrent evaluation over a wide array of particle size-specific abundances, characteristics, and distribution patterns of plastics in riverine environments. Therefore, this study provides a comprehensive assessment of plastic pollution in an urban river network in Japan by analyzing mesoplastics (5000-25,000 μm), large microplastics (300-5000 μm), small microplastics (SMPs, 10-300 μm), and microplastic-fibers (MPFs, 10-5000 μm) concurrently, for the first time. Sampling was conducted at seven stations in the Kamo and Katsura Rivers flowing across metropolitan Kyoto City. The analytical procedures involved infrared spectroscopy and fluorescence-staining microscopy. The concentrations of plastics were moderate compared to the global reports and gradually increased along the river flow (3550-15,840 items/m3; 180-13,180 μg/m3), mostly due to urban discharges via non-point sources. The number concentrations increased with decreasing particle size, marking 99.94% of SMPs, including 50% smaller than 40 μm. Conversely, mass concentrations decreased, exhibiting 96% larger than 1000 μm (64% mesoplastics including 20% around 5000 μm), along with 2% SMPs. Polyethylene (PE) and polyvinyl alcohol were distinct among SMPs, with PE indicating higher susceptibility to fragmentation compared to polypropylene and other polymer types. MPF concentrations were homogeneous throughout the watershed (1470-3600 items/m3; 520-1060 μg/m3), with a higher proportion of fibers smaller than 1000 μm (86%), apparently originating from polyethylene terephthalate/nylon/acrylic-like textile fibers. The proportion of MPFs surpassed particles within 100-3000 μm and was considerably high around 300 μm (> 98%). The river network of Kyoto conveys billions of tiny microplastics to the Yodo River, the primary water resource downstream, within a dry day.
Collapse
Affiliation(s)
- Sachithra Imbulana
- Environmentally-friendly Industries for Sustainable Development Laboratory, Graduate School of Global Environmental Studies, Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto, 606-8501, Japan.
| | - Shuhei Tanaka
- Environmentally-friendly Industries for Sustainable Development Laboratory, Graduate School of Global Environmental Studies, Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto, 606-8501, Japan
| | - Satoru Yukioka
- Environmentally-friendly Industries for Sustainable Development Laboratory, Graduate School of Global Environmental Studies, Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto, 606-8501, Japan
| | - Ibukun Oluwoye
- Environmentally-friendly Industries for Sustainable Development Laboratory, Graduate School of Global Environmental Studies, Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto, 606-8501, Japan
- Curtin Corrosion Centre, Curtin University, GPO Box U1987, Perth, WA, 6845, Australia
| |
Collapse
|
22
|
Rathinamoorthy R, Raja Balasaraswathi S. Impact of sewing on microfiber release from polyester fabric during laundry. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 903:166247. [PMID: 37574077 DOI: 10.1016/j.scitotenv.2023.166247] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/25/2023] [Revised: 07/18/2023] [Accepted: 08/10/2023] [Indexed: 08/15/2023]
Abstract
Microfibers released from textile materials are receiving greater attention due to their severe adverse effects on the environment. Although mitigation strategies have been developed for laundering, researchers uphold that it is crucial to start mitigating at the source. In that aspect, this research aims to analyze the cutting and sewing methods of knitted fabrics and their impact on the microfiber release of garments during laundry. The results of the study have confirmed that cutting and sewing methods have a significant impact on the microfiber release of a garment. The analysis of different cutting methods showed that laser and ultrasonic cutting methods reduce the microfiber release up to 20 times compared to the conventional scissor-cut edges. While comparing the different stitch types, the overlock stitch type showed reduced shedding than the other stitch types (flatlock stitch and single needle lockstitch). Our results also showed that the use of more needles increases the microfiber emission among different stitch variations of the same stitch type. For instance, a 45.27 % increase in microfiber emission was reported with the 4-thread overlock stitch (2 needles) than with the 3-thread stitch (1 needle). Regarding seam type, the proposed edge finishing seam (EFb) was effective in reducing 93 % of microfiber release as the edges are completely covered. When the effect of stitch density is considered, in the case of single needle lockstitch and flatlock stitch, the microfiber release is reduced with increased stitch density. However, a different trend was noted in the overlock stitch, which needed detailed exploration in the future. The results confirmed that a proper selection of stitch, stitch density, and seam type would reduce the microfiber release from a garment by up to 64.6 %.
Collapse
Affiliation(s)
- R Rathinamoorthy
- Department of Fashion Technology, PSG College of Technology, Coimbatore 641004, India.
| | - S Raja Balasaraswathi
- Department of Fashion Technology, National Institute of Fashion Technology, Bengaluru 560102, India
| |
Collapse
|
23
|
Büngener L, Postila H, Löder MGJ, Laforsch C, Ronkanen AK, Heiderscheidt E. The fate of microplastics from municipal wastewater in a surface flow treatment wetland. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 903:166334. [PMID: 37591375 DOI: 10.1016/j.scitotenv.2023.166334] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/17/2023] [Revised: 08/14/2023] [Accepted: 08/14/2023] [Indexed: 08/19/2023]
Abstract
Microplastics (MPs) are an anthropogenic pollutant of emerging concern prominent in both raw and treated municipal wastewater as well as urban and agricultural run-off. There is a critical need for the mitigation of both point- and diffuse sources, with treatment wetlands a possible sustainable nature-based solution. In this study, the possible retention of MPs in treatment wetlands of the widely used surface flow (SF) type was investigated. In- and outflow water, as well as atmospheric deposition, at a full-scale reed-based SF wetland (operating as a polishing phase of municipal wastewater treatment) was analyzed for MPs in a size range of 25-1000 μm. FPA-based μFT-IR spectroscopic imaging was used in combination with automated data analysis software, allowing for an unbiased assessment of MP numbers, polymer types and size distribution. Inflow water samples (secondary treated wastewater) contained 104 MPs m-3 and 56 MPs m-3 in sampling campaigns 1 and 2, respectively. Passage through the SF wetland increased the MP concentration in the water by 92 % during a rain intense period (campaign 1) and by 43 % during a low precipitation period (campaign 2). The MP particle numbers, size and polymer type distribution varied between the two sampling campaigns, making conclusions around the fate of specific types of MPs in SF wetlands difficult. Atmospheric deposition was measured to be 590 MPs m-2 week-1 during the rain-intense period. Our findings point towards atmospheric deposited MPs as an important factor in the fate of MPs in SF wetlands, causing an increase of MP concentrations, and potentially explaining the variations observed in MP concentrations in wetland effluent and removal efficiency. Furthermore, atmospheric deposition might also be a reason for the considerable inter-study variation regarding MPs removal efficiency in SF wetlands found in the available literature.
Collapse
Affiliation(s)
- Lina Büngener
- Water, Energy and Environmental Engineering, Faculty of Technology, 90014 University of Oulu, Finland.
| | - Heini Postila
- Water, Energy and Environmental Engineering, Faculty of Technology, 90014 University of Oulu, Finland
| | - Martin G J Löder
- Department of Animal Ecology I and BayCEER, University of Bayreuth, Bayreuth 95440, Germany
| | - Christian Laforsch
- Department of Animal Ecology I and BayCEER, University of Bayreuth, Bayreuth 95440, Germany
| | - Anna-Kaisa Ronkanen
- Water, Energy and Environmental Engineering, Faculty of Technology, 90014 University of Oulu, Finland; Finnish Environment Institute, Marine and freshwater solutions, Paavo Havaksen Tie 3, P. O. Box 413, FI-90014 Oulu, Finland
| | - Elisangela Heiderscheidt
- Water, Energy and Environmental Engineering, Faculty of Technology, 90014 University of Oulu, Finland
| |
Collapse
|
24
|
Rathinamoorthy R, Raja Balasaraswathi S, Madhubashini S, Prakalya A, Rakshana JB, Shathvika S. Investigation on microfiber release from elastane blended fabrics and its environmental significance. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 903:166553. [PMID: 37633399 DOI: 10.1016/j.scitotenv.2023.166553] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/10/2023] [Revised: 08/21/2023] [Accepted: 08/23/2023] [Indexed: 08/28/2023]
Abstract
Elastane blended apparel is one of the most preferred items by consumers with fashion interest due to its enhanced comfort and fit. The environmental impact and microfiber release due to elastane usage is often ignored due to its lower percentage in apparel. To address such a gap, this study aimed to quantify and characterize the microfiber release behavior of cotton/elastane knitted fabric. Cotton/Elastane blended knitted fabrics with three different proportions of Cotton/Elastane (98/2, 95/5, and 92/8) were considered for this analysis. Upon laundry and quantification, the results of the study showed that 98/2 Cotton/Elastane fabric released 21.04 ± 12.46 microfibers/sq.cm, whereas, 92/8 Cotton/Elastane fabric released 46.56 ± 6.21 microfibers/sq.cm. An increase in elastane proportion increased the overall emission of microfibers per unit area of fabric. The results also showed a higher contribution of elastane fibers in the total microfibers released. 13.40% of the total fibers released were elastane microfibers in the case of 98/2 Cotton/Elastane fabric, whereas, 92/8 Cotton/Elastane fabric released 19.60% of elastane microfibers. The elastane percentage of the fabric showed a significant positive correlation with total microfiber emission (r = 63%) and elastane microfiber emission (r = 62%). Repeated laundering results showed an overall reduction in microfiber emissions in subsequent washes. However, interestingly, an increase in the wash cycle increased the proportion of elastane microfibers in the total microfibers released. 92/8 Cotton/Elastane fabric released 20% of elastane microfibers in the first wash and the proportion increased to 36% in the 4th wash. In contrast to that, the release of cotton microfibers is noted to decrease with the number of laundry cycles. As far as the length of microfiber is considered, elastane microfibers are shorter than cotton microfibers. The length of elastane microfibers was higher in the initial wash (98/2 Cotton/Elastane fabric - 352.5 μm; 95/5 Cotton/Elastane fabric - 920 μm; 92/8 Cotton/Elastane fabric - 695 μm) and it is reduced with increment in the number of washes with a strong negative correlation of -0.88. A higher proportion of emissions and lower fiber length are the alarming negative impacts of elastane fibers in apparel. Based on this analysis, it is estimated that one square meter of fabric with a lower elastane percentage (2%) can release up to 2.81 × 104 microfibers into the environment at the first wash. The threatening issues of microfibers on aquatic life, particularly in terms of bioaccumulation and biomagnification, are alarming. Elastane blended fabrics should be given special attention because they can make the problem more serious by posing a risk of chemical leachates, such as bisphenols.
Collapse
Affiliation(s)
- R Rathinamoorthy
- Department of Fashion Technology, PSG College of Technology, Coimbatore 641004, India.
| | - S Raja Balasaraswathi
- Department of Fashion Technology, National Institute of Fashion Technology, Bengaluru 560102, India
| | - S Madhubashini
- Department of Fashion Technology, PSG College of Technology, Coimbatore 641004, India
| | - A Prakalya
- Department of Fashion Technology, PSG College of Technology, Coimbatore 641004, India
| | - J B Rakshana
- Department of Fashion Technology, PSG College of Technology, Coimbatore 641004, India
| | - S Shathvika
- Department of Fashion Technology, PSG College of Technology, Coimbatore 641004, India
| |
Collapse
|
25
|
Rathinamoorthy R, Raja Balasaraswathi S. Impact of quantification method on microfiber assessment - A comparative analysis between mass and count based methods. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2023; 347:119040. [PMID: 37751666 DOI: 10.1016/j.jenvman.2023.119040] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/28/2023] [Revised: 09/05/2023] [Accepted: 09/17/2023] [Indexed: 09/28/2023]
Abstract
Microfiber from textiles is one of the new anthropogenic pollutants which attracted a wide range of researchers. Domestic laundry, being the most common cause of microfiber release from textiles, is widely studied. Studies exhibit a broad range of quantities of microfibers owing to the distinct quantification methodologies employed due to their convenience and resource availability. Out of several such estimation processes, reporting microfiber quantity in numbers or mass (mg or g) is quite common with respect to the unit area or weight of the textile used. However, results reported by different literature vary significantly. Hence, this study aims to analyze the microfiber release from knitted polyester fabric using count- and mass-based methods. Four different fabrics were used for this study with three different counting processes from literature along with direct weight difference estimation. The results of the direct counting method showed that the average microfiber release of selected fabrics is 13.28-33.16 microfibers per sq.cm, whereas, the direct weight estimation showed an average weight of 0.0664 ± 0.0289 mg/sq.cm. The subsequent conversion showed a release of 887.89 ± 633.49 microfibers/sq.cm of the fabric. Further, the microfiber mass was also estimated using the number of microfiber count and found that a sq.cm of fabric releases up to 0.0010-0.0024 mg of microfibers. While comparing the results, the weight-based estimation showed a significantly higher microfiber release (41.3-42.9 times) than the direct counting method. The deposition of surfactants in detergents, contaminants from the water, atmospheric contaminants, and finishes released from the fabric can be the sources of additional weights noted in the direct mass estimation. As the weight-based method is quite simple and the fastest way to quantify the microfibers, future studies must focus on this area to reduce the error percentage in quantification.
Collapse
Affiliation(s)
- R Rathinamoorthy
- Department of Fashion Technology, PSG College of Technology, Coimbatore, 641004, India.
| | - S Raja Balasaraswathi
- Department of Fashion Technology, PSG College of Technology, Coimbatore, 641004, India
| |
Collapse
|
26
|
Genchi L, Martin C, Laptenok SP, Baalkhuyur F, Duarte CM, Liberale C. When microplastics are not plastic: Chemical characterization of environmental microfibers using stimulated Raman microspectroscopy. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 892:164671. [PMID: 37290646 DOI: 10.1016/j.scitotenv.2023.164671] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/07/2023] [Revised: 04/27/2023] [Accepted: 06/02/2023] [Indexed: 06/10/2023]
Abstract
The abundance of anthropogenic debris dispersed in the environment is exponentially growing, raising concerns about marine life and human exposure to microplastics. Microfibers are the most abundant microplastic type in the environment. However, recent research suggests that most microfibers dispersed in the environment are not made of synthetic polymers. In this work, we systematically tested this assumption by determining the man-made or natural origin of microfibers found in different environments, including surface waters, sediments at depths >5000 m and highly sensitive habitats like mangroves and seagrass, and treated water using stimulated Raman scattering (SRS) microscopy. Our findings show that ¾th of analyzed microfibers are of natural origin. One plastic fiber is estimated per every 50 L in surface seawater, every 5 L in desalinated drinking water, every 3 g in deep sea sediments and every 27 g in coastal sediments. Synthetic fibers were significantly larger in surface seawaters compared to organic fibers due to higher resistance to solar radiation. These results emphasize the necessity of using spectroscopical methods to assess the origin of environmental microfibers to accurately estimate the abundance of synthetic materials in the environment.
Collapse
Affiliation(s)
- Luca Genchi
- Biological and Environmental Science and Engineering Division, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
| | - Cecilia Martin
- Red Sea Research Center and Computational Bioscience Research Center, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia; Red Sea Global, SEZ Department of Environmental Sustainability, AlRaidah Digital City, Riyadh 12382 - 6726, Saudi Arabia
| | - Sergey P Laptenok
- Biological and Environmental Science and Engineering Division, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
| | - Fadiyah Baalkhuyur
- Red Sea Research Center and Computational Bioscience Research Center, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
| | - Carlos M Duarte
- Red Sea Research Center and Computational Bioscience Research Center, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia.
| | - Carlo Liberale
- Biological and Environmental Science and Engineering Division, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia; Computer, Electrical and Mathematical Sciences and Engineering, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia.
| |
Collapse
|
27
|
Ono K, Naito W, Ogura I, Xue M, Kato E, Uesaka M, Tsunemi K. Estimation of microplastic emission and transfer into Tokyo Bay, Japan, using material flow analysis. MARINE POLLUTION BULLETIN 2023; 194:115440. [PMID: 37657257 DOI: 10.1016/j.marpolbul.2023.115440] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/22/2023] [Revised: 08/09/2023] [Accepted: 08/19/2023] [Indexed: 09/03/2023]
Abstract
To reduce microplastic (MP) discharge into the aquatic environment, it is necessary to properly identify its sources and amounts. Here, specific MP sources, i.e., personal care products (PCPs), fibers from clothes, and tire-wear particles (TWPs) were focused, and MP generations from these sources in the Tokyo Bay watershed, Japan, were estimated based on statistical data on production and reported emission factors of the MP sources and executing considering uncertainty on the data. Potential annual MP emission into Tokyo Bay was estimated to be 10.2 ± 1.6, 38 ± 22, and 1500-1800 tons for PCPs, fibers, and TWPs, respectively. Emissions into Tokyo Bay by assuming MP density and diameter was estimated. For fiber, the fraction to potential emission was estimated at 1.0-2.8 %. This study contributes to determining potential discharge pathways. This will assist in the application of appropriate measures to reduce MP discharge into water bodies.
Collapse
Affiliation(s)
- Kyoko Ono
- Research Institute of Science for Safety and Sustainability, National Institute of Advanced Industrial Science and Technology, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569, Japan.
| | - Wataru Naito
- Research Institute of Science for Safety and Sustainability, National Institute of Advanced Industrial Science and Technology, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569, Japan
| | - Isamu Ogura
- Research Institute of Science for Safety and Sustainability, National Institute of Advanced Industrial Science and Technology, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569, Japan
| | - Mianqiang Xue
- Research Institute of Science for Safety and Sustainability, National Institute of Advanced Industrial Science and Technology, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569, Japan
| | - Etsuko Kato
- Research Institute of Science for Safety and Sustainability, National Institute of Advanced Industrial Science and Technology, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569, Japan
| | - Motoki Uesaka
- Research Institute of Science for Safety and Sustainability, National Institute of Advanced Industrial Science and Technology, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569, Japan
| | - Kiyotaka Tsunemi
- Research Institute of Science for Safety and Sustainability, National Institute of Advanced Industrial Science and Technology, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569, Japan
| |
Collapse
|
28
|
Rowlands E, Galloway T, Cole M, Peck VL, Posacka A, Thorpe S, Manno C. Vertical flux of microplastic, a case study in the Southern Ocean, South Georgia. MARINE POLLUTION BULLETIN 2023; 193:115117. [PMID: 37331275 DOI: 10.1016/j.marpolbul.2023.115117] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/27/2022] [Revised: 05/26/2023] [Accepted: 05/28/2023] [Indexed: 06/20/2023]
Abstract
Estimated plastic debris floating at the ocean surface varies depending on modelling approaches, with some suggesting unaccounted sinks for marine plastic debris due to mismatches between plastic predicted to enter the ocean and that accounted for at the surface. A major knowledge gap relates to the vertical sinking of oceanic plastic. We used an array of floating sediment traps combined with optical microscopy and Raman spectroscopy to measure the microplastic flux between 50 and 150 m water depth over 24 h within a natural harbour of the sub-Antarctic island of South Georgia. This region is influenced by fishing, tourism, and research activity. We found a 69 % decrease in microplastic flux from 50 m (306 pieces/m2/day) to 150 m (94pieces/m2/day). Our study confirms the occurrence of a vertical flux of microplastic in the upper water column of the Southern Ocean, which may influence zooplankton microplastic consumption and the carbon cycle.
Collapse
Affiliation(s)
- Emily Rowlands
- British Antarctic Survey, High Cross, Madingley Rd, Cambridge CB3 0ET, United Kingdom of Great Britain and Northern Ireland; University of Exeter, Faculty of Health and Life Sciences, Streatham Campus, Stocker Rd, Exeter EX4 4PY, United Kingdom of Great Britain and Northern Ireland.
| | - Tamara Galloway
- University of Exeter, Faculty of Health and Life Sciences, Streatham Campus, Stocker Rd, Exeter EX4 4PY, United Kingdom of Great Britain and Northern Ireland
| | - Matthew Cole
- Plymouth marine laboratory, Prospect Pl, Plymouth PL1 3DH, United Kingdom of Great Britain and Northern Ireland
| | - Victoria L Peck
- British Antarctic Survey, High Cross, Madingley Rd, Cambridge CB3 0ET, United Kingdom of Great Britain and Northern Ireland
| | - Anna Posacka
- Ocean Diagnostics, Suite 1102, 4464 Markham Street, Victoria, BC V8Z 7X8, Canada
| | - Sally Thorpe
- British Antarctic Survey, High Cross, Madingley Rd, Cambridge CB3 0ET, United Kingdom of Great Britain and Northern Ireland
| | - Clara Manno
- British Antarctic Survey, High Cross, Madingley Rd, Cambridge CB3 0ET, United Kingdom of Great Britain and Northern Ireland.
| |
Collapse
|
29
|
Kutralam-Muniasamy G, Shruti VC, Pérez-Guevara F, Roy PD, Martínez IE. Consumption of commercially sold dried fish snack "Charales" contaminated with microplastics in Mexico. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023:121961. [PMID: 37277071 DOI: 10.1016/j.envpol.2023.121961] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/11/2023] [Revised: 06/01/2023] [Accepted: 06/02/2023] [Indexed: 06/07/2023]
Abstract
Inadvertent human exposure to microplastics by the ingestion of microplastic-contaminated processed foods poses health risks and new preventative issues; nevertheless, investigations analyzing microplastic occurrences in commercially dried fish for direct human consumption are scarce. This study assessed the abundance and characteristics of microplastics in 25 commercially sold dried fish products (4 supermarkets, 3 street vendors, and 18 traditional agri-product farmers' markets) from two widely consumed and commercially important Chirostoma species (C. jordani and C. patzcuaro) in Mexico. Microplastics were detected in all the samples examined, with abundances ranging from 4.00 ± 0.94 to 55.33 ± 9.43 items g-1. C. jordani dried fish samples had higher mean microplastic abundance (15.17 ± 5.90 items g-1) than the C. patzcuaro dried fish samples (7.82 ± 2.90 items g-1); nevertheless, there was no statistically significant difference in microplastic concentrations between the samples. The most prevalent type of microplastic was fiber (67.55%), followed by fragment (29.18%), film (3.00%), and sphere (0.27%). Non-colored microplastics (67.35%) predominated, while microplastic sizes varied from 24 to 1670 μm, with sizes less than 500 μm (84%) being the most common. ATR-FTIR analysis revealed polyester, acrylonitrile butadiene styrene, polyvinyl alcohol, ethylene-propylene copolymer, nylon-6 (3), cellophane, and viscose in the dried fish samples. Overall, this study's findings are the first in Latin America to demonstrate microplastic contamination in dried fish for human consumption, underscoring the need for developing countermeasures to prevent plastic pollution in fish-caught regions and reduce the risks of human exposure to these micropollutants.
Collapse
Affiliation(s)
- Gurusamy Kutralam-Muniasamy
- Department of Biotechnology and Bioengineering, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Ciudad de México, Mexico
| | - V C Shruti
- Department of Biotechnology and Bioengineering, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Ciudad de México, Mexico.
| | - Fermín Pérez-Guevara
- Department of Biotechnology and Bioengineering, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Ciudad de México, Mexico; Nanoscience & Nanotechnology Program, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Ciudad de México, Mexico
| | - Priyadarsi D Roy
- Instituto de Geología, Universidad Nacional Autónoma de México (UNAM), Ciudad Universitaria, Del. Coyoacán, C.P. 04510, Ciudad de México, Mexico
| | - I Elizalde Martínez
- Instituto Politécnico Nacional (IPN), Centro Mexicano para la Producción más Limpia (CMP+L), Av. Acueducto s/n, Col. Barrio la Laguna Ticomán, Del Gustavo A. Madero, C.P. 07340, México City, Mexico
| |
Collapse
|
30
|
Yadav S, Kataria N, Khyalia P, Rose PK, Mukherjee S, Sabherwal H, Chai WS, Rajendran S, Jiang JJ, Khoo KS. Recent analytical techniques, and potential eco-toxicological impacts of textile fibrous microplastics (FMPs) and associated contaminates: A review. CHEMOSPHERE 2023; 326:138495. [PMID: 36963588 DOI: 10.1016/j.chemosphere.2023.138495] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/01/2022] [Revised: 03/05/2023] [Accepted: 03/21/2023] [Indexed: 06/18/2023]
Abstract
Despite of our growing understanding of microplastic's implications, research on the effects of fibrous microplastic (FMPs) on the environment is still in its infancy. Some scientists have hypothesized the possibility of natural textile fibres, which may act as one of the emerging environmental pollutants prevalent among microplastic pollutants in the environment. Therefore, this review aims to critically evaluate the toxic effects of emerging FMPs, the presence, and sources of FMPs in the environment, identification and analytical techniques, and the potential impact or toxicity of the FMPs on the environment and human health. About175 publications (2011-2023) based on FMPs were identified and critically reviewed for transportation, analysis and ecotoxicological behaviours of FMPs in the environment. Textile industries, wastewater treatment plants, and household washing of clothes are significant sources of FMPs. In addition, various characterization techniques (e.g., FTIR, SEM, RAMAN, TGA, microscope, and X-Ray Fluorescence Spectroscopy) commonly used for the identification and analysis of FMPs are also discussed, which justifies the novelty aspects of this review. FMPs are pollutants of emerging concern due to their prevalence and persistence in the environment. FMPs are also found in the food chain, which is an alarming situation for living organisms, including effects on the nervous system, digestive system, circulatory system, and genetic alteration. This review will provide readers with a comparison of different analytical techniques, which will be helpful for researchers to select the appropriate analytical techniques for their study and enhance their knowledge about the harmful effects of FMPs.
Collapse
Affiliation(s)
- Sangita Yadav
- Department of Environmental Science and Engineering, Guru Jambheswar University of Science &Technology, Hisar, 125001, Haryana, India
| | - Navish Kataria
- Department of Environmental Sciences, J. C. Bose University of Science and Technology, YMCA, Faridabad, 121006, Haryana, India.
| | - Pradeep Khyalia
- Department of Environmental Science, Maharshi Dayanand University, Rohtak, 124001, Haryana, India
| | - Pawan Kumar Rose
- Department of Energy and Environmental Sciences, Chaudhary Devi Lal University, Sirsa, 125055, Haryana, India
| | - Santanu Mukherjee
- Shoolini University of Biotechnology and Management Sciences, Sultanpur, Solan, Himachal Pradesh, 173229, India
| | - Himani Sabherwal
- Department of Environmental Sciences, J. C. Bose University of Science and Technology, YMCA, Faridabad, 121006, Haryana, India
| | - Wai Siong Chai
- Department of Mechanical and Electro-Mechanical Engineering, National Sun Yat-Sen University, Kaohsiung, 80424, Taiwan
| | - Saravanan Rajendran
- Faculty of Engineering, Department of Mechanical Engineering, University of Tarapaca, Avda. General Velasquez, 1775, Arica, Chile
| | - Jheng-Jie Jiang
- Department of Environmental Engineering, Chung Yuan Christian University, Taoyuan, 320314, Taiwan; Centre for Environment Risk Management (CERM), Chung Yuan Christian University, Taoyuan, 320314, Taiwan
| | - Kuan Shiong Khoo
- Department of Chemical Engineering and Materials Science, Yuan Ze University, Taoyuan, Taiwan; Department of Biotechnology, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, 602105, India; Centre for Research and Graduate Studies, University of Cyberjaya, Persiaran Bestari, 63000, Cyberjaya, Selangor, Malaysia.
| |
Collapse
|
31
|
Nantege D, Odong R, Auta HS, Keke UN, Ndatimana G, Assie AF, Arimoro FO. Microplastic pollution in riverine ecosystems: threats posed on macroinvertebrates. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023:10.1007/s11356-023-27839-9. [PMID: 37248351 DOI: 10.1007/s11356-023-27839-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/23/2023] [Accepted: 05/18/2023] [Indexed: 05/31/2023]
Abstract
Microplastics (MPs) are pollutants of emerging concern that have been reported in terrestrial and aquatic ecosystems as well as in food items. The increasing production and use of plastic materials have led to a rise in MP pollution in aquatic ecosystems. This review aimed at providing an overview of the abundance and distribution of MPs in riverine ecosystems and the potential effects posed on macroinvertebrates. Microplastics in riverine ecosystems are reported in all regions, with less research in Africa, South America, and Oceania. The abundance and distribution of MPs in riverine ecosystems are mainly affected by population density, economic activities, seasons, and hydraulic regimes. Ingestion of MPs has also been reported in riverine macroinvertebrates and has been incorporated in caddisflies cases. Further, bivalves and chironomids have been reported as potential indicators of MPs in aquatic ecosystems due to their ability to ingest MPs relative to environmental concentration. Fiber and fragments are the most common types reported. Meanwhile, polyethylene, polypropylene, polystyrene, polyethylene terephthalate (polyester), polyamide, and polyvinyl chloride are the most common polymers. These MPs are from materials/polymers commonly used for packaging, shopping/carrier bags, fabrics/textiles, and construction. Ingestion of MPs by macroinvertebrates can physically harm and inhibit growth, reproduction, feeding, and moulting, thus threatening their survival. In addition, MP ingestion can trigger enzymatic changes and cause oxidative stress in the organisms. There is a need to regulate the production and use of plastic materials, as well as disposal of the wastes to reduce MP pollution in riverine ecosystems.
Collapse
Affiliation(s)
- Diana Nantege
- Applied Hydrobiology Unit, Department of Animal Biology, Federal University of Technology, PMB 65, Minna, Nigeria.
- Department of Zoology, Entomology and Fisheries Sciences, College of Natural Sciences, Makerere University, P.O. Box 7062, Kampala, Uganda.
| | - Robinson Odong
- Department of Zoology, Entomology and Fisheries Sciences, College of Natural Sciences, Makerere University, P.O. Box 7062, Kampala, Uganda
| | - Helen Shnada Auta
- Applied Hydrobiology Unit, Department of Animal Biology, Federal University of Technology, PMB 65, Minna, Nigeria
| | - Unique Ndubuisi Keke
- Applied Hydrobiology Unit, Department of Animal Biology, Federal University of Technology, PMB 65, Minna, Nigeria
| | - Gilbert Ndatimana
- Applied Hydrobiology Unit, Department of Animal Biology, Federal University of Technology, PMB 65, Minna, Nigeria
| | - Attobla Fulbert Assie
- Applied Hydrobiology Unit, Department of Animal Biology, Federal University of Technology, PMB 65, Minna, Nigeria
| | - Francis Ofurum Arimoro
- Applied Hydrobiology Unit, Department of Animal Biology, Federal University of Technology, PMB 65, Minna, Nigeria
| |
Collapse
|
32
|
Grillo JF, López-Ordaz A, Hernández AJ, Catarí E, Sabino MA, Ramos R. Synthetic microfiber emissions from denim industrial washing processes: An overlooked microplastic source within the manufacturing process of blue jeans. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 884:163815. [PMID: 37121319 DOI: 10.1016/j.scitotenv.2023.163815] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/03/2023] [Revised: 04/24/2023] [Accepted: 04/25/2023] [Indexed: 05/04/2023]
Abstract
In recent years, domestic laundry has been recognized as a relevant source of microfiber (MF) pollution to aquatic environments. Nevertheless, the MF emissions from industrial washing processes in real world scenarios have not been quantified. The aim of this study was to quantify the MF emissions from 3 industrial washing processes (rinse wash, acid wash and enzymatic wash) commonly employed in the manufacturing process of blue jeans. The blue jeans were characterized by ATR-FT-IR, SEM and TGA to study the morphology, the polymer chemical identity and the proportion of synthetic and natural fibers, respectively. The MF emissions were quantified as the MF mass and number emitted per washed jean. All the industrial washing processes released a majority of synthetic MF. The enzymatic wash produced the highest amount of MF, with 1423 MF per gram of fabric (MF/g) equivalent to 381.7 MF grams per gram of fabric (MF g/g), followed by the acid wash with 253 MF/g equivalent to 142.7 MF g/g and lastly the rinse wash with 133 MF/g equivalent to 62.3 MF g/g. Statistically significant differences between the MF sizes for all washing processes were found when evaluating the emissions by MF/g, however, the previous trend was not found for MF g/g. Moreover, the total MF emissions of an industrial washing process of a pair of blue jeans during its manufacture process are up to 10.95 times higher than the reported domestic washing estimates performed by the consumer available in the published literature. We demonstrate that studying industrial washing procedures of textile garments will improve the accuracy of the current estimates of MF emissions available in published reports, which will ultimately aid in the development of regulations for MF emissions at an industrial level.
Collapse
Affiliation(s)
- Jose F Grillo
- Biology of Organisms Department/Center for Marine Ecotoxicological Studies (CETOXMAR), Simón Bolívar University, Miranda 8900, Venezuela; B5IDA Research Group/Chemistry Department, Simón Bolívar University, Miranda 8900, Venezuela
| | - Adriana López-Ordaz
- Biology of Organisms Department/Center for Marine Ecotoxicological Studies (CETOXMAR), Simón Bolívar University, Miranda 8900, Venezuela
| | - Andrés J Hernández
- Biology of Organisms Department/Center for Marine Ecotoxicological Studies (CETOXMAR), Simón Bolívar University, Miranda 8900, Venezuela
| | - Edgar Catarí
- Laboratorio de polímeros, Centro de Química "Dr. Gabriel Chuchani", Instituto Venezolano de Investigaciones Científicas IVIC, Miranda, 1020-A, Venezuela
| | - Marcos A Sabino
- B5IDA Research Group/Chemistry Department, Simón Bolívar University, Miranda 8900, Venezuela
| | - Ruth Ramos
- Biology of Organisms Department/Center for Marine Ecotoxicological Studies (CETOXMAR), Simón Bolívar University, Miranda 8900, Venezuela.
| |
Collapse
|
33
|
Snigdha, Hiloidhari M, Bandyopadhyay S. Environmental footprints of disposable and reusable personal protective equipment ‒ a product life cycle approach for body coveralls. JOURNAL OF CLEANER PRODUCTION 2023; 394:136166. [PMID: 36721728 PMCID: PMC9880867 DOI: 10.1016/j.jclepro.2023.136166] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/22/2022] [Revised: 01/16/2023] [Accepted: 01/22/2023] [Indexed: 06/18/2023]
Abstract
Body coveralls, often made of single-use plastics, are essential Personal Protective Equipment (PPE) and, along with masks, are widely used in healthcare facilities and public spaces in the wake of the recent COVID-19 pandemic. The widespread use of these body coveralls poses a significant threat to terrestrial and aquatic ecosystems, given their polluting nature and disposal frequency. Therefore, it is necessary to promote the adoption of alternatives that increase the safe reusability of PPE clothing and reduce environmental and health hazards. This study presents a comparative Cradle-to-Grave Life Cycle Assessment (LCA) of disposable and reusable PPE body coveralls from a product life cycle perspective. A comprehensive life cycle inventory and LCA framework specific to Indian conditions have been developed through this study. The LCA is performed as per standard protocols using SimaPro software under recipe 2016 (H) impact assessment method. Six midpoint impact categories viz. Global Warming Potential, Terrestrial Acidification, Freshwater Eutrophication, Terrestrial Ecotoxicity, Human Carcinogenic Toxicity, and Water Consumption are assessed, along with Cumulative Energy Demand. Results suggest that reusable PPE improves environmental and human health performance in all the impact categories except water consumption. Sensitivity analysis reveals that replacing conventional electricity with solar energy for PPE manufacturing and disposal will provide additional environmental benefits. The findings can help the medical textile industries, healthcare workers, and policymakers to make environmentally informed choices.
Collapse
Affiliation(s)
- Snigdha
- School of Ecology and Environment Studies, Nalanda University, Rajgir, 803116, Bihar, India
| | - Moonmoon Hiloidhari
- School of Ecology and Environment Studies, Nalanda University, Rajgir, 803116, Bihar, India
| | - Somnath Bandyopadhyay
- School of Ecology and Environment Studies, Nalanda University, Rajgir, 803116, Bihar, India
| |
Collapse
|
34
|
Rathinamoorthy R, Raja Balasaraswathi S. Characterization of microfibers released from chemically modified polyester fabrics - A step towards mitigation. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 866:161317. [PMID: 36603614 DOI: 10.1016/j.scitotenv.2022.161317] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/24/2022] [Revised: 11/18/2022] [Accepted: 12/27/2022] [Indexed: 06/17/2023]
Abstract
Synthetic textiles are one of the significant contributors to microfiber pollution, a subclass of microplastics. The impact of microfibers on the environment is irreversible. Several attempts were made to mitigate and control the microfiber release from synthetic textiles by introducing filters and laundry aids in washing machines, whereas some came up with methods to modify the textile materials to release fewer fibers. Studies have related different textile properties with their microfiber release potential. However, moisture properties, one of the essential properties that determine comfort, are not well explored. Hence, this research attempted to mitigate the microfiber release by altering the hydrophilicity of the polyester fabrics through chemical treatment (sodium hydroxide) with the hypothesis that hydrophilicity reduces the microfiber release. Both woven and knitted polyester fabrics were treated with different concentrations of the alkali solution (0.25 M, 0.50 M, 0.75 M, 1.00 M) and evaluated for their microfiber release. Treated fabrics also showed variations in their moisture and physical properties. Woven fabrics showed reduced shedding compared to knitted fabrics due to their compact structure. The results showed that the increase in alkali concentration significantly reduced the microfiber release up to 89.6 % reduction with woven fabric (from 17.37 ± 1.55 fibers/sq.cm to 2.63 ± 0.23 fibers/sq.cm) and a reduction of 68 % was noted for knitted fabric treated with 0.75 M alkali concentration (from 24.38 ± 1.30 fibers/sq.cm to 8.74 ± 1.39 fibers/sq.cm). A higher negative correlation (r = 94 % for woven and 89 % for knitted) was noted between alkali concentration and microfiber release. The alkali treatment significantly reduced the average fiber length from 450 to 230 μm, and 63-93 % of the fibers identified were in size range of 100-500 μm. When the moisture properties of the alkali-treated fabrics are concerned, an increase in moisture properties reduces the microfiber release. Water contact angle and absorbency time positively correlated with microfiber release. However, the study did not show any significant effect of moisture regain percentage and vertical wicking on microfiber shedding. Except for abrasion resistance, the physical properties of alkali-treated fabric did not show any relationship with microfiber release. The study noted the order of factors influencing the microfiber release of polyester fabric as fabric structural parameters (Woven/Knits) > fabric hydrophilicity > fabric physical property.
Collapse
Affiliation(s)
- R Rathinamoorthy
- Department of Fashion Technology, PSG College of Technology, Coimbatore 641004, India.
| | - S Raja Balasaraswathi
- Department of Fashion Technology, National Institute of Fashion Technology, Bengaluru, India
| |
Collapse
|
35
|
Hazlehurst A, Tiffin L, Sumner M, Taylor M. Quantification of microfibre release from textiles during domestic laundering. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:43932-43949. [PMID: 36680713 PMCID: PMC10076413 DOI: 10.1007/s11356-023-25246-8] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/26/2022] [Accepted: 01/06/2023] [Indexed: 06/17/2023]
Abstract
Domestic laundering of textiles is being increasingly recognised as a significant source of microfibre pollution. Reliable quantification of microfibre release is necessary to understanding the scale of this issue and to evaluate the efficacy of potential solutions. This study explores three major factors that influence the quantification of microfibres released from the domestic laundering of textiles: test methodologies, laundering variables, and fabric variables.A review of different test methods is presented, highlighting the variation in quantification created by using different methodologies. A reliable and reproducible method for quantifying microfibre release from domestic laundering is used to explore the impact of laundering and fabric variables experimentally. The reproducibility and reliability of the method used was validated through inter-laboratory trials and has informed the development of European and international testing standards. Our results show that increasing the wash liquor ratio and wash agitation results in a greater mass of microfibres released, but we found that fabric variables can have a greater influence on microfibre release than the laundering variables tested in this study. However, no single fabric variable appeared to have a dominant influence.Using the data obtained and assumptions for washing load size and frequency, results were scaled to reflect possible annual microfibre release from untreated domestic laundering in the UK. Depending on different laundering and fabric variables, these values range from 6490 tonnes to 87,165 tonnes of microfibre discharged in the UK each year.
Collapse
|
36
|
Ramasamy R, Subramanian RB. Microfiber mitigation from synthetic textiles - impact of combined surface modification and finishing process. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:49136-49149. [PMID: 36773261 DOI: 10.1007/s11356-023-25611-7] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/22/2022] [Accepted: 01/24/2023] [Indexed: 02/12/2023]
Abstract
The use of proper mitigation strategies to control the impact of microfiber pollution is need of the hour requirement. Though several laundry aids were developed to reduce the environmental impact caused by synthetic microfiber, due to the lack of awareness among the public, their effectiveness was limited. Hence, the mitigation measures at the production stage of textile materials can be a proactive solution with greater effectiveness in mitigating the issue at different stages rather than focussing only on domestic laundering. In this aspect, few recent attempts have been made to control the microfiber release from textiles by the surface finishing process. Thus, the current research focused on utilizing the surface modification process and surface finishing process to reduce the microfiber release behavior of knitted polyester fabrics. In this study, polyester knitted fabric (PES) was surface finished with chitosan (PES-Ch), sericin (PES-Se), and polyvinyl alcohol (PES-PVA), and their effectiveness in reducing microfiber shedding during laundry was analyzed. These finishes are applied directly on the polyester fabric and also after surface modification by alkali (Al) and enzyme (En) pre-treatments. The results reported that at the first wash, directly finished samples showed a reduction of 30-40% in microfiber shedding, and the samples finished after alkali pre-treatment showed a significant reduction of 47-84.29% (p < 0.05). Reduction in microfiber release was noted in the order of chitosan finish with alkali pre-treatment (PES-Al-Ch) > chitosan finish (PES-Ch) > sericin finish with alkali pre-treatment (PES-Al-Se) > polyvinyl alcohol finish with alkali pre-treatment (PES-Al-PVA) > polyvinyl alcohol finish (PES-PVA) for both fiber count and mass. In the case of enzyme pre-treatment, no reduction was reported, irrespective of the finishes applied. Repeated wash test results showed that the finishes could withstand and effectively control the microfiber release from the polyester fabric even after 20 washes. The performance of PES-Al-Ch fabric was superior among other modifications up to the fifth wash (with an 83.55% reduction in microfiber release). At extended washes like the 15th and 20th wash, the performance of PES-Al-PVA fabric was found to be better, with 94% and 95% microfiber reduction, respectively.
Collapse
|
37
|
De Frond H, Cowger W, Renick V, Brander S, Primpke S, Sukumaran S, Elkhatib D, Barnett S, Navas-Moreno M, Rickabaugh K, Vollnhals F, O'Donnell B, Lusher A, Lee E, Lao W, Amarpuri G, Sarau G, Christiansen S. What determines accuracy of chemical identification when using microspectroscopy for the analysis of microplastics? CHEMOSPHERE 2023; 313:137300. [PMID: 36414038 DOI: 10.1016/j.chemosphere.2022.137300] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/30/2022] [Revised: 10/28/2022] [Accepted: 11/17/2022] [Indexed: 06/16/2023]
Abstract
Fourier transform infrared (FTIR) and Raman microspectroscopy are methods applied in microplastics research to determine the chemical identity of microplastics. These techniques enable quantification of microplastic particles across various matrices. Previous work has highlighted the benefits and limitations of each method and found these to be complimentary. Within this work, metadata collected within an interlaboratory method validation study was used to determine which variables most influenced successful chemical identification of un-weathered microplastics in simulated drinking water samples using FTIR and Raman microspectroscopy. No variables tested had a strong correlation with the accuracy of chemical identification (r = ≤0.63). The variables most correlated with accuracy differed between the two methods, and include both physical characteristics of particles (color, morphology, size, polymer type), and instrumental parameters (spectral collection mode, spectral range). Based on these results, we provide technical recommendations to improve capabilities of both methods for measuring microplastics in drinking water and highlight priorities for further research. For FTIR microspectroscopy, recommendations include considering the type of particle in question to inform sample presentation and spectral collection mode for sample analysis. Instrumental parameters should be adjusted for certain particle types when using Raman microspectroscopy. For both instruments, the study highlighted the need for harmonization of spectral reference libraries among research groups, including the use of libraries containing reference materials of both weathered plastic and natural materials that are commonly found in environmental samples.
Collapse
Affiliation(s)
- Hannah De Frond
- Department of Ecology & Evolutionary Biology, University of Toronto, 25 Willcocks Street, Room 3055, Toronto, Ontario, Canada, M5S 3B2.
| | - Win Cowger
- Moore Institute for Plastic Pollution Research, 160 N. Marina Dr, Long Beach, CA, 90803, United States.
| | - Violet Renick
- Environmental Services Department, Orange County Sanitation District, 10844 Ellis Ave, Fountain Valley, CA, 92708, United States.
| | - Susanne Brander
- Department of Fisheries, Wildlife, and Conservation Sciences, Coastal Oregon Marine Experiment Station, Oregon State University, 2030 SE Marine Sciences Drive, Newport, OR, 97365, United States.
| | - Sebastian Primpke
- Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research, Biologische Anstalt Helgoland, Helgoland, Germany.
| | - Suja Sukumaran
- Thermo Fisher Scientific, 5225-1 Verona Rd, Fitchburg, WI, 53711, United States.
| | - Dounia Elkhatib
- Oak Ridge Institute of Science Education, c/o U.S. Environmental Protection Agency, ORD/CEMM Atlantic Coastal Environmental Sciences Division, 27 Tarzwell Drive, Narragansett, RI, 02882, United States.
| | - Steve Barnett
- Barnett Technical Services, LLC 8153 Elk Grove Blvd., Suite 20 Elk Grove, CA 95758, United States.
| | | | - Keith Rickabaugh
- RJ Lee Group, 350 Hochberg Road, Monroeville, PA 15146, United States.
| | - Florian Vollnhals
- Institute for Nanotechnology and Correlative Microscopy - INAM, Äußere Nürnbergerstr. 62, 91301 Forchheim, Germany.
| | - Bridget O'Donnell
- HORIBA Scientific, 20 Knightsbridge Rd, Piscataway, NJ 08854, United States.
| | - Amy Lusher
- Norwegian Institute for Water Research, Oslo, Norway, Department of Biological Sciences, Univeristy of Bergen, Bergen, Norway.
| | - Eunah Lee
- HORIBA Instruments Inc., 430 Indio Ave, Sunnyvale, CA, 94085, United States.
| | - Wenjian Lao
- Southern California Coastal Water Research Project Authority, 3535 Harbor Blvd., Suite 110, Costa Mesa, CA 92626, USA.
| | - Gaurav Amarpuri
- Eastman Chemical Company, 100 N. Eastman Rd., Kingsport, TN, 37660, United States.
| | - George Sarau
- Fraunhofer Institute for Ceramics Technology and Systems - IKTS, Äußere Nürnbergerstr. 62, 91301 Forchheim, Germany.
| | - Silke Christiansen
- Institute for Nanotechnology and Correlative Microscopy - INAM, Äußere Nürnbergerstr. 62, 91301 Forchheim, Germany; Fraunhofer Institute for Ceramics Technology and Systems - IKTS, Äußere Nürnbergerstr. 62, 91301 Forchheim, Germany.
| |
Collapse
|
38
|
Michishita S, Gibble C, Tubbs C, Felton R, Gjeltema J, Lang J, Finkelstein M. Microplastic in northern anchovies (Engraulis mordax) and common murres (Uria aalge) from the Monterey Bay, California USA - Insights into prevalence, composition, and estrogenic activity. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 316:120548. [PMID: 36336179 DOI: 10.1016/j.envpol.2022.120548] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/28/2022] [Revised: 10/08/2022] [Accepted: 10/28/2022] [Indexed: 06/16/2023]
Abstract
Microplastic (particle size <5 mm) is considered an emerging threat to the marine environment, yet data are limited for coastal ecosystems. To provide information related to microplastic in a coastal system, we used alkaline tissue digestion and Raman spectroscopy to quantify the prevalence and composition (e.g. fiber, fragment, foam, etc.) of anthropogenic microparticles in the digestive tracts of northern anchovies (Engraulis mordax, anchovy, n = 24), and common murres (Uria aalge, murre, n = 19) from the Monterey Bay, California USA. We also determined microplastic prevalence and composition in seawater (n = 12 17-h sampling periods representing ∼46,000 L sampled) from two Monterey Bay intake systems (Moss Landing, CA and Santa Cruz, CA USA). Microparticles recovered from murre digestive tracts were assessed for estrogenic activity using an in-vitro estrogen receptor activation assay. Suspected anthropogenic microparticles based on visual characteristics were recovered from all sample types with ∼2 particles per 1000 L from the seawater sampling periods, 58% prevalence in anchovies, and 100% prevalence in murres. Across samples of seawater, anchovies, and murres, the most abundant microparticle type found were fibers (78%), followed by fragments (13%), foam (6%), film (2%), and beads (1%). Raman spectroscopy identified 57% of microparticles (excluding dye-prominent and unknown) as plastic (synthetic, semi-synthetic, or blends). Almost one quarter (23%) of the murre digestive tracts contained microparticles that exhibited estrogenic activity. Our study describes the widespread occurrence, composition, and potential estrogenic activity of microplastic in the Monterey Bay and provides important information to aid in the understanding of microplastic contamination in coastal systems.
Collapse
Affiliation(s)
- Sami Michishita
- Department of Microbiology and Environmental Toxicology, University of California Santa Cruz, 1156 High Street, Santa Cruz, CA, 95064, USA
| | - Corinne Gibble
- California Department of Fish and Wildlife, Office of Spill Prevention and Response, Marine Wildlife Veterinary Care and Research Center, 151 McAllister Way, Santa Cruz, CA, 95060, USA
| | - Christopher Tubbs
- Conservation Science Wildlife Health, San Diego Zoo Wildlife Alliance, 15600 San Pasqual Valley Road, Escondido, CA, 92027, USA
| | - Rachel Felton
- Conservation Science Wildlife Health, San Diego Zoo Wildlife Alliance, 15600 San Pasqual Valley Road, Escondido, CA, 92027, USA
| | - Jenessa Gjeltema
- Department of Medicine and Epidemiology and the Karen C. Drayer Wildlife Health Center, University of California Davis School of Veterinary Medicine, One Shields Drive, Davis, CA, 95616, USA
| | - Jackelyn Lang
- Department of Medicine and Epidemiology and the Karen C. Drayer Wildlife Health Center, University of California Davis School of Veterinary Medicine, One Shields Drive, Davis, CA, 95616, USA
| | - Myra Finkelstein
- Department of Microbiology and Environmental Toxicology, University of California Santa Cruz, 1156 High Street, Santa Cruz, CA, 95064, USA.
| |
Collapse
|
39
|
Andrady AL, Barnes PW, Bornman JF, Gouin T, Madronich S, White CC, Zepp RG, Jansen MAK. Oxidation and fragmentation of plastics in a changing environment; from UV-radiation to biological degradation. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 851:158022. [PMID: 35970458 PMCID: PMC9765214 DOI: 10.1016/j.scitotenv.2022.158022] [Citation(s) in RCA: 100] [Impact Index Per Article: 33.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/19/2022] [Revised: 08/09/2022] [Accepted: 08/10/2022] [Indexed: 05/26/2023]
Abstract
Understanding the fate of plastics in the environment is of critical importance for the quantitative assessment of the biological impacts of plastic waste. Specially, there is a need to analyze in more detail the reputed longevity of plastics in the context of plastic degradation through oxidation and fragmentation reactions. Photo-oxidation of plastic debris by solar UV radiation (UVR) makes material prone to subsequent fragmentation. The fragments generated following oxidation and subsequent exposure to mechanical stresses include secondary micro- or nanoparticles, an emerging class of pollutants. The paper discusses the UV-driven photo-oxidation process, identifying relevant knowledge gaps and uncertainties. Serious gaps in knowledge exist concerning the wavelength sensitivity and the dose-response of the photo-fragmentation process. Given the heterogeneity of natural UV irradiance varying from no exposure in sediments to full UV exposure of floating, beach litter or air-borne plastics, it is argued that the rates of UV-driven degradation/fragmentation will also vary dramatically between different locations and environmental niches. Biological phenomena such as biofouling will further modulate the exposure of plastics to UV radiation, while potentially also contributing to degradation and/or fragmentation of plastics independent of solar UVR. Reductions in solar UVR in many regions, consequent to the implementation of the Montreal Protocol and its Amendments for protecting stratospheric ozone, will have consequences for global UV-driven plastic degradation in a heterogeneous manner across different geographic and environmental zones. The interacting effects of global warming, stratospheric ozone and UV radiation are projected to increase UV irradiance at the surface in localized areas, mainly because of decreased cloud cover. Given the complexity and uncertainty of future environmental conditions, this currently precludes reliable quantitative predictions of plastic persistence on a global scale.
Collapse
Affiliation(s)
- A L Andrady
- Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, USA
| | - P W Barnes
- Biological Sciences and Environmental Program, Loyola University New Orleans, New Orleans, LA, USA
| | - J F Bornman
- Food Futures Institute, Murdoch University, Perth, Australia
| | - T Gouin
- TG Environmental Research, Sharnbrook, Bedfordshire, UK
| | - S Madronich
- Atmospheric Chemistry Observations and Modeling Laboratory, National Center for Atmospheric Research, Boulder, CO, USA
| | | | - R G Zepp
- ORD/CEMM, US Environmental Protection Agency, Athens, GA, USA
| | - M A K Jansen
- School of BEES, Environmental Research Institute, University College Cork, Cork, Ireland.
| |
Collapse
|
40
|
Mishra S, Dash D, Das AP. Detection, characterization and possible biofragmentation of synthetic microfibers released from domestic laundering wastewater as an emerging source of marine pollution. MARINE POLLUTION BULLETIN 2022; 185:114254. [PMID: 36306713 DOI: 10.1016/j.marpolbul.2022.114254] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/25/2022] [Revised: 10/07/2022] [Accepted: 10/11/2022] [Indexed: 06/16/2023]
Abstract
Synthetic microfibers are universally recognized as an emerging pollutant in all ecosystems. The present investigation focuses on the evaluation and quantification of synthetic microfiber released from domestic laundering wastewater from different regions of Bhubaneswar city of Odisha state of India. The estimated number of microfibers collected from 500 ml of sample varied from 200 to 500 in numbers with an average amount of biomass in the range of 0.4-4 g. The surface morphology of the samples was assessed by Scanning Electron Microscopic analysis which revealed that the fibers were having a length of approximately 10-30 mm and diameter of 10-20 μm. Carbonyl (CO) stretching band at 1711 cm-1 and Aldehyde (CH) Weak bond at 2917.38 cm-1 absorption were recorded from Fourier transform infrared spectroscopic analysis. As microfibers released from synthetic apparels are major source of environmental microplastic pollution their precise detection could help in controlling this problem.
Collapse
Affiliation(s)
- Sunanda Mishra
- Department of Botany, College of Basic Science and Humanities, Odisha University of Agriculture and Technology, India
| | - Debasis Dash
- Department of Botany, College of Basic Science and Humanities, Odisha University of Agriculture and Technology, India
| | - Alok Prasad Das
- Department of Life Science, Rama Devi Women's University, Bhubaneswar, Odisha, India.
| |
Collapse
|
41
|
Noël M, Wong C, Ross PS, Patankar S, Etemadifar A, Morales-Caselles C, Lyons S, Delisle K. Microplastics distribution in sediment and mussels along the British Columbia Coast, Canada. MARINE POLLUTION BULLETIN 2022; 185:114273. [PMID: 36330939 DOI: 10.1016/j.marpolbul.2022.114273] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/12/2022] [Revised: 10/12/2022] [Accepted: 10/17/2022] [Indexed: 06/16/2023]
Abstract
Microplastics (MPs) were characterized in surficial marine sediment (n = 36) and mussel (n = 29) samples collected along the British Columbia (BC) coast, Canada, using visual identification and Fourier Transform Infrared Spectrometry. MPs counts averaged 32.6 ± 5.3 particles per kg in sediment and 0.38 ± 0.04 particles per individual mussel (0.24 ± 0.04 /g of tissue). Victoria Harbour and the North Coast (Prince Rupert area) were MP hotspots, likely resulting from a combination of local sources and oceanographic conditions. Microfibers <1000 μm dominated the pattern in both matrices (61.1 % in sediment; 65.4 % mussels) highlighting the suspected role of textiles in the widespread distribution of MPs in the marine environment. Overall, polyester was dominant in sediment and mussels (54.1 % and 63.5 %, respectively), followed by polyethylene (16.2 % and 11.5 %, respectively). This is the first report of MPs in sediment and mussels along the coast of BC using standardized methods.
Collapse
Affiliation(s)
- Marie Noël
- Ocean Wise, Vancouver, British Columbia, Canada.
| | | | - Peter S Ross
- Raincoast Conservation Foundation, Sidney, British Columbia, Canada
| | | | | | | | - Shirley Lyons
- Capital Regional District, Victoria, British Columbia, Canada
| | | |
Collapse
|
42
|
Carbery M, Herb F, Reynes J, Pham CK, Fong WK, Lehner R. How small is the big problem? Small microplastics <300 μm abundant in marine surface waters of the Great Barrier Reef Marine Park. MARINE POLLUTION BULLETIN 2022; 184:114179. [PMID: 36206615 DOI: 10.1016/j.marpolbul.2022.114179] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/26/2022] [Revised: 09/22/2022] [Accepted: 09/23/2022] [Indexed: 06/16/2023]
Abstract
Particle size plays an important role in determining the behaviour, fate and effects of microplastics (MPs), yet little is known about MPs <300 μm in aquatic environments. Therefore, we performed the first assessment of MPs in marine surface waters around the Whitsunday Islands region of the Great Barrier Reef Marine Park, Australia, to test for the presence of small MPs (50-300 μm) in-situ. Using a modified manta net, we demonstrate that MPs were present in all marine surface water samples, with a mean sea surface concentration of 0.23 ± 0.03 particles m-3. Microplastics were mainly blue, clear and black fibres and fragments, consisting of polyethylene terephthalate, high-density polyethylene and polypropylene plastic polymers. Tourism and marine recreation were considered the major contributing sources of MPs to surface waters around the Whitsunday Islands. Between 10 and 124 times the number of MPs exist in the 50 μm-300 μm size class, compared with the 1 mm-5 mm size range. This finding indicates that the global abundance of small MPs in marine surface waters is grossly underestimated and warrants further investigation. Research into the occurrence, characteristics and environmental fate of MPs <300 μm is needed to improve our understanding of the cumulative threats facing valuable ecosystems due to this smaller, potentially more hazardous size class.
Collapse
Affiliation(s)
- Maddison Carbery
- School of Environmental and Life Sciences, University of Newcastle, Callaghan 2308, NSW, Australia
| | - Frithjof Herb
- School of Environmental and Life Sciences, University of Newcastle, Callaghan 2308, NSW, Australia
| | - Julien Reynes
- Institute of Geological Sciences, University of Bern, CH-3012 Bern, Switzerland; Institute of Earth Sciences, University of Lausanne, Géopolis, Quartier Mouline, 1015 Lausanne, Switzerland
| | - Christopher K Pham
- Instituto de Investigação em Ciências do Mar - IMAR/OKEANOS, Universidade dos Açores, 9900-138 Horta, Portugal
| | - Wye-Khay Fong
- School of Environmental and Life Sciences, University of Newcastle, Callaghan 2308, NSW, Australia.
| | - Roman Lehner
- Sail and Explore Association, Kramgasse 18, 3011 Bern, Switzerland.
| |
Collapse
|
43
|
Reduced Graphene Oxide–Metal Oxide Nanocomposites (ZrO2 and Y2O3): Fabrication and Characterization for the Photocatalytic Degradation of Picric Acid. Catalysts 2022. [DOI: 10.3390/catal12101249] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022] Open
Abstract
Herein, reduced graphene-oxide-supported ZrO2 and Y2O3 (rGO-ZrO2 and rGO-Y2O3) nanocomposites were synthesized by hydrothermal method and used as the catalysts for photodegradation of picric acid. The structural and morphological properties of the synthesized samples were characterized by using an X-ray diffractometer (XRD), scanning electron microscope (SEM) with energy dispersive absorption X-ray spectroscopy (EDAX), UV-Vis spectrophotometer, Raman spectrophotometer and Fourier transformation infrared spectrophotometer (FT-IR) techniques. In this work, the wide band gap of the ZrO2 and Y2O3 was successfully reduced by addition of the reduced graphene oxide (rGO) to absorb visible light for photocatalytic application. The performance of as synthesized rGO-ZrO2 and rGO-Y2O3 nanocomposites in the photocatalytic degradation of picric acid were evaluated under UV light irradiation. The photodegradation study using picric acid was analyzed with different energy light sources UV (254, 365 and 395 nm), visible light and sunlight at different pH conditions (pH = 3, 7 and 10). The photocatalytic activity of rGO-ZrO2 and rGO-Y2O3 nanocomposites showed excellent photocatalytic activity under optimum identical conditions with mild variations in pH 3. Compared to rGO-Y2O3, the rGO-ZrO2 nanocomposite showed a better action, with a degradation percentage rate of 100, 99.3, 99.9, 100 and 100% for light conditions of UV-252, 365, 395, visible and sunlight, respectively. The excellent degradation efficiency is attributed to factors such as oxygen-deficient metal oxide phase, high surface area and creation of a greater number of hydroxyl groups.
Collapse
|
44
|
Finnegan AMD, Süsserott R, Gabbott SE, Gouramanis C. Man-made natural and regenerated cellulosic fibres greatly outnumber microplastic fibres in the atmosphere. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2022; 310:119808. [PMID: 35926740 DOI: 10.1016/j.envpol.2022.119808] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/28/2022] [Revised: 07/15/2022] [Accepted: 07/16/2022] [Indexed: 06/15/2023]
Abstract
Atmospheric microplastics have been widely reported in studies around the world. Microfibres are often the dominant morphology found by researchers, although synthetic (i.e., plastic) microfibres are typically just a fraction of the total number of microfibres, with other, non-synthetic, cellulosic microfibres frequently being reported. This study set out to review existing literature to determine the relative proportion of cellulosic and synthetic atmospheric anthropogenic (man-made) microfibres, discuss trends in the microfibre abundances, and outline proposed best-practices for future studies. We conducted a systematic review of the existing literature and identified 33 peer-reviewed articles from Scopus and Google Scholar searches that examined cellulosic microfibres and synthetic microfibres in the atmosphere. Multiple analyses indicate that cellulosic microfibres are considerably more common than synthetic microfibres. FT-IR and Raman spectroscopy data obtained from 24 studies, showed that 57% of microfibres were cellulosic and 23% were synthetic. The remaining were either inorganic, or not determined. In total, 20 studies identified more cellulosic microfibres, compared to 11 studies which identified more synthetic microfibres. The data show that cellulosic microfibres are 2.5 times more abundant between 2016 and 2022, however, the proportion of cellulosic microfibres appear to be decreasing, while synthetic microfibres are increasing. We expect a crossover to happen by 2030, where synthetic microfibres will be dominant in the atmosphere. We propose that future studies on atmospheric anthropogenic microfibres should include information on natural and regenerated cellulosic microfibres, and design studies which are inclusive of cellulosic microfibres during analysis and reporting. This will allow researchers to monitor trends in the composition of atmospheric microfibers and will help address the frequent underestimation of cellulosic microfibre abundance in the atmosphere.
Collapse
Affiliation(s)
| | - Rebekah Süsserott
- Geography Department, National University of Singapore, 1 Arts Link, #03-01 Block AS2, Singapore 117570, Singapore
| | - Sarah E Gabbott
- School of Geography, Geology and Environment, University of Leicester, University Road, Leicester, LE1 7RH, UK
| | - Chris Gouramanis
- Research School of Earth Sciences, The Australian National University, Building 142, Mills Road, Acton, ACT 2601, Australia
| |
Collapse
|
45
|
Gong W, Guo Y, Yang W, Wu Z, Xing R, Liu J, Wei W, Zhou J, Guo Y, Li K, Hou C, Li Y, Zhang Q, Dickey MD, Wang H. Scalable and Reconfigurable Green Electronic Textiles with Personalized Comfort Management. ACS NANO 2022; 16:12635-12644. [PMID: 35930746 DOI: 10.1021/acsnano.2c04252] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Electronic textiles, inherited with the wearability of conventional clothes, are deemed fundamental for emerging wearable electronics, particularly in the Internet of Things era. However, the electronic waste produced by electronic textiles will further exacerbate the severe pollution in traditional textiles. Here, we develop a large-scale green electronic textile using renewable bio-based polylactic acid and sustainable eutectic gallium-indium alloys. The green electronic textile is extremely abrasion resistant and can degrade naturally in the environment even if abrasion produces infinitesimal amounts of microplastics. The mass loss and performance change rates of the reconstituted green electronic textiles are all below 5.4% after going through the full-cycle recycling procedure. This green electronic textile delivers high physiological comfort (including electronic comfort and thermal-moisture comfort), enables wireless power supply (without constraints by, e.g., wires and ports), has 2 orders of magnitude better air and moisture permeability than the body requires, and can lower skin temperature by 5.2 °C.
Collapse
Affiliation(s)
- Wei Gong
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P.R. China
- Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117583, Singapore
| | - Yang Guo
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P.R. China
- Shanghai Wearalab Co., Ltd., Shanghai 201612, P.R. China
| | - Weifeng Yang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P.R. China
| | - Zhihua Wu
- State Key Laboratory of Oncogenes and Related Genes, Shanghai Cancer Institute, Renji Hospital School of Medicine, Shanghai Jiao Tong University, Shanghai 200032, P.R. China
| | - Ruizhe Xing
- School of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi'an 710072, P.R. China
| | - Jin Liu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P.R. China
| | - Wei Wei
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P.R. China
| | - Jie Zhou
- College of Electronics and Information Engineering, Sichuan University, Chengdu 610064, P.R. China
| | - Yinben Guo
- School of Materials Engineering, Shanghai University of Engineering Science, Shanghai 201620, P.R. China
| | - Kerui Li
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P.R. China
| | - Chengyi Hou
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P.R. China
| | - Yaogang Li
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P.R. China
| | - Qinghong Zhang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P.R. China
| | - Michael D Dickey
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, North Carolina 27695, United States
| | - Hongzhi Wang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P.R. China
| |
Collapse
|
46
|
A Review on Heavy Metal Ion Adsorption on Synthetic Microfiber Surface in Aquatic Environments. Appl Biochem Biotechnol 2022; 194:4639-4654. [PMID: 35779174 DOI: 10.1007/s12010-022-04029-w] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 06/26/2022] [Indexed: 11/02/2022]
Abstract
Synthetic microfibers (SMFs), tiny particles which gets fragmented from large fragments of large synthetic fibers having less than 10 µm in diameter, have gathered ubiquitously in each and every corner of the earth. After their release into the aquatic environment, they remain there without natural degradation. Furthermore, it can be anticipated that floating units are transported along the food chain leading to bioaccumulation. It has been estimated that approximately 10-20 Mt of large fabric products as garbage enter into aquatic system per annum. Recently, these synthetic fragments have been investigated as transporters of heavy metal ions (HMs) showing different types of interactions. Yet, the underlying mechanism of these types of interaction is not known, especially the factors stimulating this process and how badly they affect biotic communities. Through this article, a detailed survey was carried out on the sources of microfibers and HMs into the aquatic environment, adsorption of different types of HMs on the SMF surface, mechanics favors these HM-MF interactions, particularly highlighting the significant roles of interaction on microbial biofilm formation. Their collaborative effects which possess harmful effects on aquatic as well as terrestrial organisms was also discussed. Lastly, the future investigations should focus on rigorous research in this field. This article to the best of our knowledge briefly describes the current research developments and emphasizes the vital function of the microorganisms on MFs-HMs interactions with the encouragement for rigorous research in this field to reveal accurate mechanisms and decrease the hazards related with MF presence.
Collapse
|
47
|
Frost H, Bond T, Sizmur T, Felipe-Sotelo M. A review of microplastic fibres: generation, transport, and vectors for metal(loid)s in terrestrial environments. ENVIRONMENTAL SCIENCE. PROCESSES & IMPACTS 2022; 24:504-524. [PMID: 35348562 DOI: 10.1039/d1em00541c] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
The laundering of synthetic fabrics has been identified as an important and diffuse source of microplastic (<5 mm) fibre contamination to wastewater systems. Home laundering can release up to 13 million fibres per kg of fabric, which end up in wastewater treatment plants. During treatment, 72-99% of microplastics are retained in the residual sewage sludge, which can contain upwards of 56 000 microplastics per kg. Sewage sludge is commonly disposed of by application to agricultural land as a soil amendment. In some European countries, application rates are up to 91%, representing an important pathway for microplastics to enter the terrestrial environment, which urgently requires quantification. Sewage sludge also often contains elevated concentrations of metals and metalloids, and some studies have quantified metal(loid) sorption onto various microplastics. The sorption of metals and metalloids is strongly influenced by the chemical properties of the sorbate, the solution chemistry, and the physicochemical properties of the microplastics themselves. Plastic-water partition coefficients for the sorption of cadmium, mercury and lead onto microplastics are up to 8, 32, and 217 mL g-1 respectively. Sorptive capacities of microplastics may increase over time, due to environmental degradation processes increasing the specific surface area and surface density of oxygen-containing functional groups. A range of metal(loid)s, including cadmium, chromium, and zinc, have been shown to readily desorb from microplastics under acidic conditions. Sorbed metal(loid)s may therefore become more bioavailable to soil organisms when the microplastics are ingested, due to the acidic gut conditions facilitating desorption. Polyester (polyethylene terephthalate) should be of particular focus for future research, as few quantitative sorption studies currently exist, it is potentially overlooked from density separation studies due to its high density, and it is by far the most widely used fibre in apparel textiles production.
Collapse
Affiliation(s)
- H Frost
- Department of Chemistry, University of Surrey, Guildford, Surrey GU2 7XH, UK.
| | - T Bond
- Department of Civil and Environmental Engineering, University of Surrey, Guildford, GU2 7XH, UK
| | - T Sizmur
- Department of Geography and Environmental Science, University of Reading, Reading, RG6 6DW, UK
| | - M Felipe-Sotelo
- Department of Chemistry, University of Surrey, Guildford, Surrey GU2 7XH, UK.
| |
Collapse
|
48
|
Šaravanja A, Pušić T, Dekanić T. Microplastics in Wastewater by Washing Polyester Fabrics. MATERIALS 2022; 15:ma15072683. [PMID: 35408015 PMCID: PMC9000408 DOI: 10.3390/ma15072683] [Citation(s) in RCA: 48] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/28/2022] [Revised: 03/28/2022] [Accepted: 04/04/2022] [Indexed: 02/04/2023]
Abstract
Microplastics have become one of the most serious environmental hazards today, raising fears that concentrations will continue to rise even further in the near future. Micro/nanoparticles are formed when plastic breaks down into tiny fragments due to mechanical or photochemical processes. Microplastics are everywhere, and they have a strong tendency to interact with the ecosystem, putting biogenic fauna and flora at risk. Polyester (PET) and polyamide (PA) are two of the most important synthetic fibres, accounting for about 60% of the total world fibre production. Synthetic fabrics are now widely used for clothing, carpets, and a variety of other products. During the manufacturing or cleaning process, synthetic textiles have the potential to release microplastics into the environment. The focus of this paper is to explore the main potential sources of microplastic pollution in the environment, providing an overview of washable polyester materials.
Collapse
|
49
|
Lant NJ, Defaye MMA, Smith AJ, Kechi-Okafor C, Dean JR, Sheridan KJ. The impact of fabric conditioning products and lint filter pore size on airborne microfiber pollution arising from tumble drying. PLoS One 2022; 17:e0265912. [PMID: 35385503 PMCID: PMC8985936 DOI: 10.1371/journal.pone.0265912] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/07/2021] [Accepted: 03/09/2022] [Indexed: 12/02/2022] Open
Abstract
Vented tumble dryers release moist warm air from the drying process to the external environment, usually through pipework linking the appliance to a vent in an exterior wall. Although such dryers contain a lint filter to remove fibers from this air stream, recent reports suggest that this process is incomplete, leading to microfibers being released in the ducted warm air and subsequently polluting the external environment. Microfiber release from wash loads comprising 10 100% cotton and 10 100% polyester T-shirts (total load mass ratio 48% cotton, 52% polyester) was measured at different stages of the washing and drying process to compare the quantities of fibers released ‘down the drain’, collected in the dryer lint filter, and released to air from the tumble dryer. Testing under both European and North American washing conditions found that the quantities of microfibers released to air during tumble drying were significant and comparable to levels released ‘down the drain’ during washing. Use of conventional rinse-added liquid fabric conditioner increased microfiber accumulation on the dryer lint filter, with reduced release from the dryer exhaust observed at the highest fabric conditioner dose tested (21.6% and 14.2% reduction under North American and European conditions, respectively). Conventional liquid fabric conditioner did not significantly impact microfiber release from the washing machine, in line with previous studies. A fabric conditioner specially designed for anti-wrinkle performance reduced microfiber release from the dryer exhaust at all levels tested (by 17.6–35.6%, depending on dose), apparently by increasing the efficiency of microfiber accumulation in the lint filter. Tumble dryer sheets were also found to cause a reduction in microfiber release from the dryer exhaust (by 14.1–34.9%, depending on the dose/product), likely driven by collection of liberated fibers on the sheet during the drying process. The use of both antiwrinkle liquid fabric conditioner and dryer sheet enabled a 44.9% reduction in microfiber emissions from the dryer exhaust. In all studies, the fiber mass collected on the lint filter or emitted from the dryer exhaust was richer in cotton fibers (range 83.4–96.3% on the lint filter, 93.0–99.8% from the dryer exhaust) than the wash load composition (48% cotton). Moreover, fibers collected by the lint filter contained a higher proportion of polyester than emissions from the dryer exhaust (range 3.7–16.6% on the lint filter, 0.2–7.0% from the dryer exhaust). There is significant variation in the porosity of lint filters among installed vented tumble dryers. Single-variable testing of the impact of lint filter design concluded that reducing screen pore size significantly reduces airborne microfiber release during tumble drying; a reduction in lint filter pore size from 0.2 mm2 to 0.04 mm2 reduced release by 34.8%. As some lint filters have pore sizes of around 1 mm2, there is enormous scope to reduce microfiber release from dryers though improved lint filter design. However, it is suggested that a step-change in appliance design away from vented dryers to only fully-sealed condenser dryers might be necessary to eliminate the contribution of tumble drying to airborne microfiber pollution.
Collapse
Affiliation(s)
- Neil J. Lant
- Procter & Gamble, Newcastle Innovation Center, Newcastle upon Tyne, United Kingdom
- * E-mail:
| | - Margaux M. A. Defaye
- Procter & Gamble, Newcastle Innovation Center, Newcastle upon Tyne, United Kingdom
| | - Andrew J. Smith
- Procter & Gamble, Newcastle Innovation Center, Newcastle upon Tyne, United Kingdom
| | - Chimdia Kechi-Okafor
- Department of Applied Sciences, Northumbria University, Newcastle upon Tyne, United Kingdom
| | - John R. Dean
- Department of Applied Sciences, Northumbria University, Newcastle upon Tyne, United Kingdom
| | - Kelly J. Sheridan
- Department of Applied Sciences, Northumbria University, Newcastle upon Tyne, United Kingdom
| |
Collapse
|
50
|
Arias AH, Alfonso MB, Girones L, Piccolo MC, Marcovecchio JE. Synthetic microfibers and tyre wear particles pollution in aquatic systems: Relevance and mitigation strategies. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2022; 295:118607. [PMID: 34883149 DOI: 10.1016/j.envpol.2021.118607] [Citation(s) in RCA: 39] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/31/2021] [Revised: 11/13/2021] [Accepted: 11/28/2021] [Indexed: 06/13/2023]
Abstract
Evidence shows that the majority of aquatic field microplastics (MPs) could be microfibers (MFs) which can be originated directly from massive sources such as textile production and shedding from garments, agricultural textiles and clothes washing. In addition, wear and tear of tyres (TRWPs) emerges as a stealthy major source of micro and nanoplastics, commonly under-sampled/detected in the field. In order to compile the current knowledge in regards to these two major MPs sources, concentrations of concern in aquatic environments, their distribution, bulk emission rates and water mitigation strategies were systematically reviewed. Most of the aquatic field studies presented MFs values above 50%. MPs concentrations varied from 0.3 to 8925 particles m-3 in lakes, from 0.69 to 8.7 × 106 particles m-3 in streams and rivers, from 0.16 to 192000 particles m-3 estuaries, and from 0 to 4600 particles m-3 in the ocean. Textiles at every stage of production, use and disposal are the major source of synthetic MFs to water. Laundry estimates showed an averaged release up to 279972 tons year-1 (high washing frequency) from which 123000 tons would annually flow through untreated effluents to rivers, streams, lakes or directly to the ocean. TRWPs in the aquatic environments showed concentrations up to 179 mg L-1 (SPM) in runoff river sediments and up to 480 mg g-1 in highway runoff sediments. Even though average TRWR emission is of 0.95 kg year-1 per capita (10 nm- 500 μm) there is a general scarcity of information about their aquatic environmental levels probably due to no-availability or inadequate methods of detection. The revision of strategies to mitigate the delivering of MFs and TRWP into water streams illustrated the importance of domestic laundry retention devices, Waste Water Treatment Plants (WWTP) with at least a secondary treatment and stormwater and road-runoff collectors quality improvement devices.
Collapse
Affiliation(s)
- Andrés H Arias
- Instituto Argentino de Oceanografía (IADO), Universidad Nacional del Sur (UNS)-CONICET, Florida, 8000, Complejo CCT CONICET Bahía Blanca, Edificio E1, B8000BFW, Bahía Blanca, Argentina; Departamento de Química, Universidad Nacional del Sur, Avenida Alem 1253, B8000DIC, Bahía Blanca, Argentina.
| | - María B Alfonso
- Instituto Argentino de Oceanografía (IADO), Universidad Nacional del Sur (UNS)-CONICET, Florida, 8000, Complejo CCT CONICET Bahía Blanca, Edificio E1, B8000BFW, Bahía Blanca, Argentina; Research Institute for Applied Mechanics, Kyushu University, 6-1 Kasuga-Koen, Kasuga, 816-8580, Japan
| | - Lautaro Girones
- Instituto Argentino de Oceanografía (IADO), Universidad Nacional del Sur (UNS)-CONICET, Florida, 8000, Complejo CCT CONICET Bahía Blanca, Edificio E1, B8000BFW, Bahía Blanca, Argentina
| | - María C Piccolo
- Instituto Argentino de Oceanografía (IADO), Universidad Nacional del Sur (UNS)-CONICET, Florida, 8000, Complejo CCT CONICET Bahía Blanca, Edificio E1, B8000BFW, Bahía Blanca, Argentina; Departamento de Geografía y Turismo, Universidad Nacional del Sur, 12 de Octubre 1198, B8000CTX, Bahía Blanca, Argentina
| | - Jorge E Marcovecchio
- Instituto Argentino de Oceanografía (IADO), Universidad Nacional del Sur (UNS)-CONICET, Florida, 8000, Complejo CCT CONICET Bahía Blanca, Edificio E1, B8000BFW, Bahía Blanca, Argentina; Universidad Tecnológica Nacional-Facultad Regional Bahía Blanca (UTN-FRBB),11 de Abril 461, B8000LMI, Bahía Blanca, Argentina; Universidad de la Fraternidad de Agrupaciones Santo Tomás de Aquino, Gascón, 3145, B7600FNK, Mar del Plata, Argentina; Academia Nacional de Ciencias Exactas, Físicas y Naturales (ANCEFN), Av. Alvear 1711, C1014 AAE, Ciudad Autónoma de Buenos Aires, Argentina
| |
Collapse
|