Investigation of temperature-induced phase transitions in DOPC and DPPC phospholipid bilayers using temperature-controlled scanning force microscopy

Formulation, development and evaluation of hyaluronic acid-conjugated liposomal nanoparticles loaded with regorafenib and curcumin and their in vitro evaluation on colorectal cancer cell lines

Colorectal cancer is one of the major causes of global cancer, with chemotherapy and radiation therapy being effective but limited due to low specificity. Regorafenib, a multikinase inhibitor, provides hope to patients with metastatic colorectal cancer and was approved by the FDA in 2012. However, due to resistance issues and adverse events, its efficacy is compromised, necessitating further refinement. Meanwhile, curcumin, a compound of turmeric, exhibits anticancer effects through antioxidant and anti-inflammatory actions, induction of the apoptosis, arrest of cell cycle, inhibition of angiogenesis, and modulation of signaling pathways. Unfortunately, its clinical utility is limited by its poor bioavailability, pointing towards innovative drug delivery strategies for enhanced efficacy in colorectal cancer treatment. Hyaluronic acid (HA)-decorated liposomes (LIPO) have been developed to target colorectal cells through an overexpressed CD44 receptor, increasing antitumor and antimetastasis efficacy. This study investigates the possibility of loading curcumin (CUR) or regorafenib (REGO) into a liposomal formulation for passive and HA-actively targeted treatment, evaluating its critical quality attributes (CQA) (size, zeta potential, polydispersity index) and cytotoxic activity in the HT29 colorectal cancer cell line. The average particle size of the plain liposomes and those decorated with HA was 144.00 ± 0.78 nm and 140.77 ± 1.64 nm, respectively. In contrast, curcumin-loaded plain liposomes and HA-decorated liposomes had 140 ± 2.46 nm and 164.53 ± 15.13 nm, respectively. The prepared liposomes had a spherical shape with a narrow size distribution and an acceptable zeta potential of less than -30 mV. The encapsulation efficiency was 99.2 % ± 0.3 and 99.9 ± 0.2 % for HA-decorated and bare regorafenib loaded. The % EE was 98.9 ± 0.2 % and 97.5 ± 0.2 % for bare liposomal nanoparticles loaded with curcumin and coated with curcumin. The IC50 of free REGO, CUR, REGO-LIPO, CUR-LIPO, REGO-LIPO-HA and CUR-LIPO-HA were 20.17 ± 0.78, 64.4 ± 0.33, 224.8 ± 0.06, 49.66 ± 0.22, 73.66 ± 0.6, and 27.86 ± 0.49 µM, respectively. The MTT assay in HT29 cells showed significant cytotoxic activity of the HA-decorated liposomal formulation compared to the base uncoated formulation, indicating that hyaluronic acid-targeted liposomes loaded with regorafenib or curcumin could be a promising targeted formulation against colorectal cancer cells.

Controlling plasmonic suprastructures through self-assembly of gold nanoparticles with hybrid copolymer-lipid vesicles

Hybrid lipid membranes incorporating amphiphilic copolymers have gained significant attention due to their potential applications in various fields, including drug delivery and sensing. By combining the properties of copolymers and lipid membranes, such as enhanced chemical tunability and stability, environmental responsiveness, and multidomain nature, novel membrane architectures have been proposed. In this study, we investigated the potentialities of hybrid membranes made of two distinct components: the rigid fully saturated phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and the soft copolymer poly(butadiene-b-ethyleneoxide) (PBD-b-PEO). The objective was to explore the interaction of citrate-coated gold nanoparticles (AuNPs) and the hybrid membrane, aiming at constructing AuNPs-hybrid vesicles suprastructures with controlled and adjustable plasmonic properties. A series of experimental techniques were employed to investigate hybrid free-standing and supported membranes. The results revealed that the incorporation of the copolymer into the lipid membrane promotes AuNPs clustering, demonstrating a distinctive aggregative phenomenon of citrate-coated AuNPs on multidomain membranes. Importantly, we show that the size and morphology of AuNPs clusters can be precisely controlled in non-homogeneous membranes, enabling the formation of hybrid suprastructures with controlled patch properties. These results highlight the potential of lipid-copolymer hybrid membranes for designing functional materials with tailored plasmonic properties, with potential applications in nanomedicine and sensing.

Phasor-FLIM-guided unraveling of ATRA supramolecular organization in liposomal nanoformulations

Here we use fluorescence lifetime imaging microscopy (FLIM) to study the supramolecular organization of nanoencapsulated liposomal all-trans retinoic acid (ATRA), exploiting ATRA's intrinsic fluorescence as a source of signal and phasor transformation as a fit-free analytical approach to lifetime data. Our non-invasive method is suitable for checking for the presence of a fraction of ATRA molecules interacting with liposomal membranes. The results are validated by independent small-angle X-ray scattering (SAXS) and nano-differential scanning calorimetry (NanoDSC) measurements, probing ATRA's putative position on the membrane and effect on membrane organization. Besides the insights on the specific case-study proposed, the present results confirm the effectiveness of Phasor-FLIM analysis in elucidating the nanoscale supramolecular organization of fluorescent drugs in pharmaceutical formulations. This underscores the importance of leveraging advanced imaging techniques to deepen our understanding and optimize drugs' performance in delivery applications.

Anomalous lateral diffusion of lipids during the fluid/gel phase transition of a lipid membrane

A lipid membrane undergoes a phase transition from fluid to gel phase upon changing external thermodynamic conditions, such as decreasing temperature and increasing pressure. Extremophilic organisms face the challenge of preventing this deleterious phase transition. The main focus of their adaptive strategy is to facilitate effective temperature sensing through sensor proteins, relying on the drastic changes in packing density and membrane fluidity during the phase transition. Although the changes in packing density parameters due to the fluid/gel phase transition are studied in detail, the impact on membrane fluidity is less explored in the literature. Understanding the lateral diffusive dynamics of lipids in response to temperature, particularly during the fluid/gel phase transition, is albeit crucial. Here we have simulated the phase transition of a single component lipid membrane composed of dipalmitoylphosphatidylcholine (DPPC) lipids using a coarse-grained (CG) model and studied the changes of the structural and dynamical properties. It is observed that near the phase transition point, both fluid and gel phase domains coexist together. The dynamics remains highly non-Gaussian for a long time even when the mean square displacement reaches the Fickian regime at a much earlier time. This Fickian yet non-Gaussian diffusion (FnGD) is a characteristic of a highly heterogeneous system, previously observed for the lateral diffusion of lipids in raft mimetic membranes having liquid-ordered and liquid-disordered phases co-existing together. We have analyzed the molecular trajectories and calculated the jump-diffusion of the lipids, stemming from sudden jump translations, using a translational jump-diffusion (TJD) approach. An overwhelming contribution of the jump-diffusion of the lipids is observed suggesting anomalous diffusion of lipids during fluid/gel phase transition of the membrane. These results are important in unravelling the intricate nature of lipid diffusion during the phase transition of the membrane and open up a new possibility of investigating the most significant change of membrane properties during phase transition, which can be effectively sensed by proteins.

Surfactin molecules with a cone-like structure promote the formation of membrane domains with negative spontaneous curvature and induce membrane invaginations

Surfactin uniquely influences lipid bilayer structure by initially inducing membrane invaginations before solubilization. In this study, we exposed DOPC giant vesicles to various surfactin concentrations at different temperatures and observed surfactin-induced membrane invaginations by using differential interference contrast and confocal laser fluorescence microscopy. These invaginations were stable at room temperature but not at higher temperatures. Surfactin molecules induce membrane nanodomains with negative spontaneous curvature and membrane invaginations despite their intrinsic conical shape and intrinsic positive curvature. Considering the experimentally observed capacity of surfactin to fluidize lipid acyl chains and induce partial dehydration of lipid headgroups, we propose that the resulting surfactin-lipid complexes exhibit a net negative spontaneous curvature. We further conducted 3D numerical Monte Carlo (MC) simulations to investigate the behaviour of vesicles containing negative curvature nanodomains within their membrane at varying temperatures. MC simulations demonstrated strong agreement with experimental results, revealing that invaginations are preferentially formed at low temperatures, while being less pronounced at elevated temperatures. Our findings go beyond the expectations of the Israelachvili molecular shape and packing concepts analysis. These concepts do not take into account the influence of specific interactions between neighboring molecules on the inherent shapes of molecules and their arrangement within curved membrane nanodomains. Our work contributes to a more comprehensive understanding of the complex factors governing vesicle morphology and membrane organization and provides insight into the role of detergent-lipid interactions in modulating vesicle morphology.

Monolayer/Bilayer Equilibrium of Phospholipids in Gel or Liquid States: Interfacial Adsorption via Monomer or Liposome Diffusion?

Phospholipids (PLs) are widely used in the pharma industry and a better understanding of their behavior under different conditions is helpful for applications such as their use as medical transporters. The transition temperature Tm affects the lipid conformation and the interfacial tension between perfluoroperhydrophenanthrene (PFP) and an aqueous suspension of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), 1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC), as well as a mixture of these PLs with cholesterol. Interfacial tensions were measured with the Du Noüy ring at quasi-equilibrium; the area per molecule was calculated according to the Gibbsian approach and a time-dependent tension gradient. Results show that the time tε to reach quasi-equilibrium was shorter when the temperature was above Tm, indicating a faster adsorption process (tε,DPPC,36 °C = 48 h, tε,DPPC,48 °C = 24 h) for PL in the liquid crystalline state than in the gel state (T < Tm). In addition, concentration-dependent results of the interfacial tension revealed that above the respective Tm and at all concentrations c > 0.1 mM, the average minimum interfacial tension for DPPC and DSPC (14.1 mN/m and 15.3 mN/m) does not differ significantly between those two lipids. Equilibrium between monolayers and bilayers shows that for T < Tm, surface pressures ∏ ≈ 31 mN/m are reached while for T > Tm, ∏ ≈ 41 mN/m. Mixtures with cholesterol only reach ∏ ≤ 31 mN/m Tm, with no significant difference between the two PLs. The higher interfacial tension of the mixture indicates stabilization of the liposomal conformation in the aqueous phase by the addition of cholesterol. The high diffusion coefficients show that adsorption is mainly based on liposomes.

Engineering phosphatidylinositol-4,5-bisphosphate model membranes enriched in endocytic cargo: A neutron reflectometry, AFM and QCM-D structural study

The combination of in vitro models of biological membranes based on solid-supported lipid bilayers (SLBs) and of surface sensitive techniques, such as neutron reflectometry (NR), atomic force microscopy (AFM) and quartz crystal microbalance with dissipation monitoring (QCM-D), is well suited to provide quantitative information about molecular level interactions and lipid spatial distributions. In this work, cellular plasma membranes have been mimicked by designing complex SLB, containing phosphatidylinositol 4,5-bisphosphate (PtdIns4,5P2) lipids as well as incorporating synthetic lipo-peptides that simulate the cytoplasmic tails of transmembrane proteins. The QCM-D results revealed that the adsorption and fusion kinetics of PtdIns4,5P2 are highly dependent of Mg2+. Additionally, it was shown that increasing concentrations of PtdIns4,5P2 leads to the formation of SLBs with higher homogeneity. The presence of PtdIns4,5P2 clusters was visualized by AFM. NR provided important insights about the structural organization of the various components within the SLB, highlighting that the leaflet symmetry of these SLBs is broken by the presence of CD4-derived cargo peptides. Finally, we foresee our study to be a starting point for more sophisticated in vitro models of biological membranes with the incorporation of inositol phospholipids and synthetic endocytic motifs.

Determination of the Main Phase Transition Temperature of Phospholipids by Oscillatory Rheology

Knowledge of the physical and chemical properties of phospholipids, such as phase transition temperatures (Tc), is of great importance in order to reveal the functionalities of biological and artificial membranes. Our research group developed an oscillatory rheological method for the simple and rapid determination of phase transition temperatures (Tc). The phospholipids constructing the membranes undergo conformational changes at their Tc, which cause alterations of viscoelastic properties of the molecules. The oscillatory technique recommended by us proved to be appropriate to reveal the altered molecular properties of phospholipids as tracking the slightest changes in the viscoelasticity. Our study demonstrates the abrupt changes in rheological properties at Tc for the following phospholipids: 1,2-Dimyristoyl-sn-glycero-3-Phosphocholine (DMPC), 1,2-Dipalmitoyl-sn-glycero-3-Phosphatidylcholine (DPPC), and 1,2-Distearoyl-sn-glycero-3-Phosphocholine (DSPC), proving that the applied methodology is adequate for determining the Tc of phospholipids.

Gold-Supported Lipid Membranes Formed by Redox-Triggered Vesicle Fusion on Binary Self-Assembled Monolayers: Ion-Pairing Association and Surface Hydrophilicity

The assembly of biomimetic, planar supported lipid bilayers (SLBs) by the popular vesicle fusion method, which relies on the spontaneous adsorption and rupture of small unilamellar vesicles from aqueous solution on a solid surface, typically works with a limited range of support materials and lipid systems. We previously reported a conceptual advance in the formation of SLBs from vesicles in the gel or fluid phase using the interfacial ion-pairing association of charged phospholipid headgroups with electrochemically generated cationic ferroceniums bound to a self-assembled monolayer (SAM) chemisorbed to gold. This redox-driven approach lays down a single bilayer membrane on the SAM-modified gold surface at room temperature within minutes and is compatible with both anionic and zwitterionic phospholipids. The present work explores the effects of the surface ferrocene concentration and hydrophobicity/hydrophilicity on the formation of continuous SLBs of dialkyl phosphatidylserine, dialkyl phosphatidylglycerol, and dialkyl phosphatidylcholine using binary SAMs of ferrocenylundecanethiolate (FcC₁₁S) and dodecanethiolate (CH₃C₁₁S) or hydroxylundecanethiolate (HOC₁₁S) comprising different surface mole fractions of ferrocene (χ_Fc^surf). An increase in the surface hydrophilicity and surface free energy of the FcC₁₁S/HOC₁₁S SAM mitigates the decrease in the attractive ion-pairing interactions resulting from a reduced χ_Fc^surf. SLBs of ≳80% area coverage form on the FcC₁₁S/HOC₁₁S SAM for all the phospholipid types down to χ_Fc^surf of at least 0.2, composition yielding a water contact angle (θ_W) of 44 ± 4°. By contrast, a greater number of ion-pairing interactions is required on the hydrophobic FcC₁₁S/CH₃C₁₁S surface to drive the vesicle fusion process; bilayers or bilayer patches form at χ_Fc^surf ≳ 0.6 (θ_W = 97 ± 3°). These findings will aid in tailoring the surface chemistry of redox-active modified surfaces to widen the conditions that yield supported lipid membranes.

Molecular Mechanisms of Lipid-Based Metabolic Adaptation Strategies in Response to Cold

Temperature changes and periods of detrimental cold occur frequently for many organisms in their natural habitats. Homeothermic animals have evolved metabolic adaptation strategies to increase mitochondrial-based energy expenditure and heat production, largely relying on fat as a fuel source. Alternatively, certain species are able to repress their metabolism during cold periods and enter a state of decreased physiological activity known as torpor. By contrast, poikilotherms, which are unable to maintain their internal temperature, predominantly increase membrane fluidity to diminish cold-related damage from low-temperature stress. However, alterations of molecular pathways and the regulation of lipid-metabolic reprogramming during cold exposure are poorly understood. Here, we review organismal responses that adjust fat metabolism during detrimental cold stress. Cold-related changes in membranes are detected by membrane-bound sensors, which signal to downstream transcriptional effectors, including nuclear hormone receptors of the PPAR (peroxisome proliferator-activated receptor) subfamily. PPARs control lipid metabolic processes, such as fatty acid desaturation, lipid catabolism and mitochondrial-based thermogenesis. Elucidating the underlying molecular mechanisms of cold adaptation may improve beneficial therapeutic cold treatments and could have important implications for medical applications of hypothermia in humans. This includes treatment strategies for hemorrhagic shock, stroke, obesity and cancer.

Continuous Electrospray Ionization Mass Spectrometry Assay for Measuring Phospholipase Activity against Liposomes

Phospholipases have diverse roles in lipid and cell membrane biology. In animal venoms, they can have roles as neurotoxins or myotoxins that disrupt the integrity of cell membranes. In this work, we describe a temperature-controlled, continuous electrospray ionization mass spectrometry (ESI-MS) assay for measuring phospholipase A₂ activity against liposomes. The enzyme used in this assay was paradoxin, which is a neurotoxic trimeric phospholipase A₂ from inland taipan snake venom. Previously developed ESI-MS-based phospholipase assays have been discontinuous and analyzed hydrolysis of single lipid molecules by liquid chromatography ESI-MS. In this work, a continuous assay was developed against liposomes, a more complex substrate that more closely reflects the natural substrate for paradoxin. The assay confirmed the requirement for Ca²⁺ and allowed measurement of Michaelis-Menten-type parameters. The use of ESI-MS for lipid detection enabled nuanced insights into the effect of changing assay conditions not only on the enzyme but also on the liposome substrate. Changing the metal ion concentrations did not significantly change the liposomes but did affect enzymatic activity. Increasing temperature did not substantially affect the secondary structure of paradoxin but affected liposome size, resulting in increased enzymatic activity consistent with the disruption of the phosphatidylcholine membrane, increasing accessibility of sn-2 ester bonds. The continuous ESI-MS method described herein can be applied to other enzyme reactions, particularly those which utilize complex lipid substrates.

Miscibility of Phosphatidylcholines in Bilayers: Effect of Acyl Chain Unsaturation

The miscibility of phospholipids in a hydrated bilayer is an issue of fundamental importance for understanding the organization of biological membranes. Despite research on lipid miscibility, its molecular basis remains poorly understood. In this study, all-atom MD simulations complemented by Langmuir monolayer and DSC experiments have been performed to investigate the molecular organization and properties of lipid bilayers composed of phosphatidylcholines with saturated (palmitoyl, DPPC) and unsaturated (oleoyl, DOPC) acyl chains. The experimental results showed that the DOPC/DPPC bilayers are systems exhibiting a very limited miscibility (strongly positive values of excess free energy of mixing) at temperatures below the DPPC phase transition. The excess free energy of mixing is divided into an entropic component, related to the ordering of the acyl chains, and an enthalpic component, resulting from the mainly electrostatic interactions between the headgroups of lipids. MD simulations showed that the electrostatic interactions for lipid like-pairs are much stronger than that for mixed pairs and temperature has only a slight influence on these interactions. On the contrary, the entropic component increases strongly with increasing temperature, due to the freeing of rotation of acyl chains. Therefore, the miscibility of phospholipids with different saturations of acyl chains is an entropy-driven process.

The Interplay Between Cholesterol and Amyloid-β on HT22 Cell Viability, Morphology, and Receptor Tyrosine Kinase Signaling

BACKGROUND

There is a lack of understanding in the molecular and cellular mechanisms of Alzheimer's disease that has hindered progress on therapeutic development. The focus has been on targeting toxic amyloid-β (Aβ) pathology, but these therapeutics have generally failed in clinical trials. Aβ is an aggregation-prone protein that has been shown to disrupt cell membrane structure in molecular biophysics studies and interfere with membrane receptor signaling in cell and animal studies. Whether the lipid membrane or specific receptors are the primary target of attack has not been determined.

OBJECTIVE

This work elucidates some of the interplay between membrane cholesterol and Aβ42 on HT22 neuronal cell viability, morphology, and platelet-derived growth factor (PDGF) signaling pathways.

METHODS

The effects of cholesterol depletion by methyl-β-cyclodextrin followed by treatment with Aβ and/or PDGF-AA were assessed by MTT cell viability assays, western blot, optical and AFM microscopy.

RESULTS

Cell viability studies show that cholesterol depletion was mildly protective against Aβ toxicity. Together cholesterol reduction and Aβ42 treatment compounded the disruption of the PDGFα receptor activation. Phase contrast optical microscopy and live cell atomic force microscopy imaging revealed that cytotoxic levels of Aβ42 caused morphological changes including cell membrane damage, cytoskeletal disruption, and impaired cell adhesion; cell damage was ameliorated by cellular cholesterol depletion.

CONCLUSIONS

Cholesterol depletion impacted the effects of Aβ42 on HT22 cell viability, morphology, and receptor tyrosine kinase signaling.

Anticorrelated position fluctuation of lipids in forming membrane water pores: molecular dynamics simulations study with dengue virus capsid protein

The traffic of molecules into or out of cells is regulated by many membrane-associated mechanisms. Membrane pores are considered as one of the major passage mechanisms, although molecular-level understanding of pore formation is still vague. The opening of a membrane pore depends on many factors, including the influence of some proteins. The ability of the cell-penetrating peptides and supercharged proteins to form membrane pores has been reported. We studied pore formation through dipalmitoylphosphatidylcholine (DPPC) lipid bilayers by supercharged dengue virus capsid (C) protein. Atomistic molecular dynamics simulations confirmed the formation of membrane pores by a combined effect of the C protein and the membrane electric field. Analyses of simulated trajectories showed highly correlated vertical position fluctuations between the C_α atom of the membrane-anchored arginine residues and the phosphorus atoms of the surrounding DPPC lipids. Certain regions of the bilayer were negatively correlated while the others were positively correlated with respect to the fluctuations of the C_α atom of the anchored arginine residues. When positively correlated lipids in one leaflet vertically aligned with the negatively correlated lipids in the other leaflet, a local anticorrelated region was generated by weakening the bilayer. The membrane pore was always formed close to this anticorrelated region. Once formed, the C protein followed the hydrated pathway provided by the water-filled pores to cross the membrane.Communicated by Ramaswamy H. Sarma.

States of Aggregation and Phase Transformation Behavior of Metallosurfactant Complexes by Hexacyanoferrate(II): Thermodynamic and Kinetic Investigation of ETR in Ionic Liquids and Liposome Vesicles

Electronic absorption spectroscopy was used to study the ETR of surfactant-cobalt(III) complexes containing imidazo[4,5-f][1,10]phenanthroline, dipyrido[3,2-d:2'-3'-f]quinoxaline and dipyrido[3,2-a:2',4'-c](6,7,8,9-tetrahydro)phenazine ligands by using ferrocyanide ions in unilamellar vesicles of dipalmitoylphosphotidylcholine (DPPC) and 1-butyl-3-methylimidazolium bromide ((BMIM)Br), at different temperatures under pseudo-first-order conditions using an excess of the reductant. The reactions were found to be second-order and the electron transfer is postulated as occurring in the outer sphere. The rate constant for the electron transfer reactions was found to increase with increasing concentrations of ionic liquids. Besides these, the effects of surfactant complex ions on liposome vesicles in these same reactions have also been studied on the basis of hydrophobicity. We observed that, below the phase transition temperature, there is an increasing amount of surfactant-cobalt(III) complexes expelled from the interior of the vesicle membrane through hydrophobic effects, while above the phase transition temperature, the surfactant-cobalt(III) complexes are expelled from the interior to the exterior surface of the vesicle. Kinetic data and activation parameters are interpreted in respect of an outer-sphere electron transfer mechanism. By assuming the existence of an outer-sphere mechanism, the results have been clarified based on the presence of hydrophobicity, and the size of the ligand increases from an ip to dpqc ligand and the reactants become oppositely charged. In all these media, the ΔS^# values are recognized as negative in their direction in all the concentrations of complexes employed, indicative of a more ordered structure of the transition state. This is compatible with a model in which these complexes and [Fe(CN)₆]^4- ions bind to the DPPC in the transition state. Thus, the results have been interpreted based on the self-aggregation, hydrophobicity, charge densities of the co-ligand and the reactants with opposite charges.

Cardiolipin for Enhanced Cellular Uptake and Cytotoxicity of Thermosensitive Liposome-Encapsulated Daunorubicin toward Breast Cancer Cell Lines

Daunorubicin (DNR) and cardiolipin (CL) were co-delivered using thermosensitive liposomes (TSLs). 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1-myristoyl-2-stearoyl-sn-glycero-3-phosphocholine (MSPC), cholesterol, 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] or DSPE-mPEG (2000) and CL were used in the formulation of liposomes at a molar ratio of 57:40:30:3:20, respectively. CL forms raft-like microdomains that may relocate and change lipid organization of the outer and inner mitochondrial membranes. Such transbilayer lipid movement eventually leads to membrane permeabilization. TSLs were prepared by thin-film hydration (drug:lipid ratio 1:5) where DNR was encapsulated within the aqueous core of the liposomes and CL acted as a component of the lipid bilayer. The liposomes exhibited high drug encapsulation efficiency (>90%), small size (~115 nm), narrow size distribution (polydispersity index ~0.12), and a rapid release profile under the influence of mild hyperthermia. The liposomes also exhibited ~4-fold higher cytotoxicity against MDA-MB-231 cells compared to DNR or liposomes similar to DaunoXome® (p < 0.001). This study provides a basis for developing a co-delivery system of DNR and CL encapsulated in liposomes for treatment of breast cancer.

Phospholipid-porphyrin conjugates: deciphering the driving forces behind their supramolecular assemblies

Phospholipid-porphyrin conjugates (PL-Por) are nowadays considered as a unique class of building blocks that can self-assemble into supramolecular structures that possess multifunctional properties and enhanced optoelectronics characteristics compared to their disassembled counterparts. However, despite their versatile properties, little is known about the impact of the packing parameter of PL-Por conjugates on their assembling mechanism and their molecular organization inside these assemblies. To gain a better understanding on their assembling properties, we synthesized two new series of PL-Por conjugates with different alkyl sn2-chain lengths linked via an amide bond to either pheophorbide-a (Ph_xLPC) or pyropheophorbide-a (Pyr_xLPC). By combining a variety of experimental techniques with molecular dynamics (MD) simulations, we investigated both the assembling and optical properties of the PL-Por either self-assembled or when incorporated into lipid bilayers. We demonstrated that independently of the linker length, Ph_xLPC assembled into closed ovoid structures, whereas Pyr_xLPC formed rigid open sheets. Interestingly, Pyr_xLPC assemblies displayed a significant red shift and narrowing of the Q-band indicating the formation of ordered J-aggregates. The MD simulations highlighted the central role of the interaction between porphyrin cores rather than the length difference between the two phospholipid chains in controlling the structure of the lipid bilayer membranes and thus their optical properties. Indeed, while Ph_xLPC have the tendency to form inter-leaflet π-stacked dimers, Pyr_xLPC conjugates formed dimers within the same leaflet. Altogether, this work could be used as guidelines for the design of new PL-Por conjugates that self-assemble into bilayer-like supramolecular structures with tunable morphology and optical properties.

A Review of Liposomes as a Drug Delivery System: Current Status of Approved Products, Regulatory Environments, and Future Perspectives

Liposomes have been considered promising and versatile drug vesicles. Compared with traditional drug delivery systems, liposomes exhibit better properties, including site-targeting, sustained or controlled release, protection of drugs from degradation and clearance, superior therapeutic effects, and lower toxic side effects. Given these merits, several liposomal drug products have been successfully approved and used in clinics over the last couple of decades. In this review, the liposomal drug products approved by the U.S. Food and Drug Administration (FDA) and European Medicines Agency (EMA) are discussed. Based on the published approval package in the FDA and European public assessment report (EPAR) in EMA, the critical chemistry information and mature pharmaceutical technologies applied in the marketed liposomal products, including the lipid excipient, manufacturing methods, nanosizing technique, drug loading methods, as well as critical quality attributions (CQAs) of products, are introduced. Additionally, the current regulatory guidance and future perspectives related to liposomal products are summarized. This knowledge can be used for research and development of the liposomal drug candidates under various pipelines, including the laboratory bench, pilot plant, and commercial manufacturing.

Multiscale modelling of the extracellular matrix

The extracellular matrix is a complex three-dimensional network of molecules that provides cells with a complex microenvironment. The major constituents of the extracellular matrix such as collagen, elastin and associated proteins form supramolecular assemblies contributing to its physicochemical properties and organization. The structure of proteins and their supramolecular assemblies such as fibrils have been studied at the atomic level (e.g., by X-ray crystallography, Nuclear Magnetic Resonance and cryo-Electron Microscopy) or at the microscopic scale. However, many protein complexes are too large to be studied at the atomic level and too small to be studied by microscopy. Most extracellular matrix components fall into this intermediate scale, so-called the mesoscopic scale, preventing their detailed characterization. Simulation and modelling are some of the few powerful and promising approaches that can deepen our understanding of mesoscale systems. We have developed a set of modelling tools to study the self-organization of the extracellular matrix and large motion of macromolecules at the mesoscale level by taking advantage of the dynamics of articulated rigid bodies as a mean to study a larger range of motions at the cost of atomic resolution.

Sustained-release ketamine-loaded lipid-particulate system: in vivo assessment in mice

Ketamine is used as an analgesic adjuvant in patients with chronic cancer-related pain. However, ketamine's short half-life requires frequent dose administration. Our aim was to develop a sustained release formulation of ketamine with high loading and to evaluate the in vivo pharmacokinetics and biodistribution in mice. Here, ketamine hydrochloride sustained-release lipid particles (KSL) were developed using the thin-film hydration method. The mean (± SD) encapsulation efficiency (EE) and drug loading (DL) of KSL were 65.6 (± 1.7)% and 72.4 (± 0.5)% respectively, and the mean (± SD) size of the lipid particles and the polydispersity index were 738 (± 137) nm and 0.44 (± 0.02) respectively. The release period of KSL in pH 7.4 medium was 100% complete within 8 h in vitro but a sustained-release profile was observed for more than 5 days after intravenous injection in mice. Importantly, the KSL formulation resulted in a 27-fold increase in terminal half-life, a threefold increase in systemic exposure (AUC_0-∞), and a threefold decrease in clearance compared with the corresponding pharmacokinetics for intravenous ketamine itself. Our findings demonstrate high encapsulation efficiency of ketamine in the sustained-release KSL formulation with prolonged release in mice after systemic dose administration despite 100% in vitro release within 8 h that requires future investigation.

Bimolecular quenching of tryptophan fluorescence in a membrane protein: Evolution of local solvation and environment during folding into a bilayer

Fluorescence spectroscopy, including Stern-Volmer quenching, is a valuable tool for the study of protein dynamics. Changes in protein solvation during the folding reaction of a membrane protein, Outer membrane protein A (OmpA), into lipid bilayers was probed with bimolecular fluorescence quenching with acrylamide quencher. Six single-tryptophan OmpA mutants (W7, W15, W57, W102, W129, and W143) allowed for site-specific investigations at varying locations within the transmembrane β-barrel domain. A sphere-of-action quenching model that combines both static and dynamic components gave rise to Stern-Volmer quenching constants, KD, for OmpA denatured in 8.0 M urea, aggregated in 0.5 M urea, adsorbed onto small unilamellar vesicles (SUVs), and folded in SUVs (t = 6 hrs). The average KD values were KDdenatured(6.4M-1)>KDaggregated5.9M-1>KDadsorbed(1.9M-1)>KDfolded(0.6M-1). With knowledge of the fluorescence lifetimes in the absence of quencher, the bimolecular quenching constants, kq, were derived; the evolution of kq (and therefore KD)during the folding reaction into SUVs (t = 0 hr to t = 6 hrs) revealed desolvation timescales, τdesolv of 41-46 min (W7, W15, W57, W102), 27 min (W129), and 15 min (W143). The evolution of λmax during folding revealed fast and slow components, τenvironmentfast and τenvironmentslow of 7-13 min and 25-84 min, respectively, for all mutants. For the five lipid- facing mutants (W7, W15, W57, W129, and W143), the general trend was τenvironmentfast7-13min<τdesolv15-46min≤τenvironmentslow(25-84min). These results suggest that there is an initial fast step in which there is a large change in polarity to a hydrophobic environment, followed by a slower desolvation process during evolution within the hydrophobic environment. These results complement previous mechanisms of concerted folding and provide insights into site-specific changes in solvation during formation of native β-barrel structure.

Stiffness of Fluid and Gel Phase Lipid Nanovesicles: Weighting the Contributions of Membrane Bending Modulus and Luminal Pressurization

The mechanical properties of biogenic membranous compartments are thought to be relevant in numerous biological processes; however, their quantitative measurement remains challenging for most of the already available force spectroscopy (FS)-based techniques. In particular, the debate on the mechanics of lipid nanovesicles and on the interpretation of their mechanical response to an applied force is still open. This is mostly due to the current lack of a unified model being able to describe the mechanical response of both gel and fluid phase lipid vesicles and to disentangle the contributions of membrane rigidity and luminal pressure. In this framework, we herein propose a simple model in which the interplay of membrane rigidity and luminal pressure to the overall vesicle stiffness is described as a series of springs; this approach allows estimating these two contributions for both gel and fluid phase liposomes. Atomic force microscopy-based FS, performed on both vesicles and supported lipid bilayers, is exploited for obtaining all the parameters involved in the model. Moreover, the use of coarse-grained full-scale molecular dynamics simulations allowed for better understanding of the differences in the mechanical responses of gel and fluid phase bilayers and supported the experimental findings. The results suggest that the pressure contribution is similar among all the probed vesicle types; however, it plays a dominant role in the mechanical response of lipid nanovesicles presenting a fluid phase membrane, while its contribution becomes comparable to the one of membrane rigidity in nanovesicles with a gel phase lipid membrane. The results presented herein offer a simple way to quantify two of the most important parameters in vesicle nanomechanics (membrane rigidity and internal pressurization), and as such represent a first step toward a currently unavailable, unified model for the mechanical response of gel and fluid phase lipid nanovesicles.

Lipid Self-Assemblies under the Atomic Force Microscope

Lipid model membranes are important tools in the study of biophysical processes such as lipid self-assembly and lipid–lipid interactions in cell membranes. The use of model systems to adequate and modulate complexity helps in the understanding of many events that occur in cellular membranes, that exhibit a wide variety of components, including lipids of different subfamilies (e.g., phospholipids, sphingolipids, sterols…), in addition to proteins and sugars. The capacity of lipids to segregate by themselves into different phases at the nanoscale (nanodomains) is an intriguing feature that is yet to be fully characterized in vivo due to the proposed transient nature of these domains in living systems. Model lipid membranes, instead, have the advantage of (usually) greater phase stability, together with the possibility of fully controlling the system lipid composition. Atomic force microscopy (AFM) is a powerful tool to detect the presence of meso- and nanodomains in a lipid membrane. It also allows the direct quantification of nanomechanical resistance in each phase present. In this review, we explore the main kinds of lipid assemblies used as model membranes and describe AFM experiments on model membranes. In addition, we discuss how these assemblies have extended our knowledge of membrane biophysics over the last two decades, particularly in issues related to the variability of different model membranes and the impact of supports/cytoskeleton on lipid behavior, such as segregated domain size or bilayer leaflet uncoupling.

Designing a Useful Lipid Raft Model Membrane for Electrochemical and Surface Analytical Studies

A model biomimetic system for the study of protein reconstitution or drug interactions should include lipid rafts in the mixed lipid monolayer, since they are usually the domains embedding membrane proteins and peptides. Four model lipid films composed of three components: 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), cholesterol (Chol) and sphingomyelin (SM) mixed in different molar ratios were proposed and investigated using surface pressure measurements and thermodynamic analysis of the monolayers at the air-water interface and imaged by Brewster angle microscopy. The ternary monolayers were transferred from the air-water onto the gold electrodes to form bilayer films and were studied for the first time by electrochemical methods: alternative current voltammetry and electrochemical impedance spectroscopy and imaged by atomic force microscopy. In excess of DOPC, the ternary systems remained too liquid for the raft region to be stable, while in the excess of cholesterol the layers were too solid. The layers with SM in excess lead to the formation of Chol:SM complexes but the amount of the fluid matrix was very low. The equimolar content of the three components lead to the formation of a stable and well-organized assembly with well-developed raft microdomains of larger thickness, surrounded by the more fluid part of the bilayer. The latter is proposed as a convenient raft model membrane for further physicochemical studies of interactions with drugs or pollutants or incorporation of membrane proteins.

Hydrodynamic shear dissipation and transmission in lipid bilayers

Vital biological processes, such as trafficking, sensing, and motility, are facilitated by cellular lipid membranes, which interact mechanically with surrounding fluids. Such lipid membranes are only a few nanometers thick and composed of a liquid crystalline structure known as the lipid bilayer. Here, we introduce an active, noncontact, two-point microrheology technique combining multiple optical tweezers probes with planar freestanding lipid bilayers accessible on both sides. We use the method to quantify both fluid slip close to the bilayer surface and transmission of fluid flow across the structure, and we use numerical simulations to determine the monolayer viscosity and the intermonolayer friction. We find that these physical properties are highly dependent on the molecular structure of the lipids in the bilayer. We compare ordered-phase with liquid disordered-phase lipid bilayers, and we find the ordered-phase bilayers to be 10 to 100 times more viscous but with 100 times less intermonolayer friction. When a local shear is applied by the optical tweezers, the ultralow intermonolayer friction results in full slip of the two leaflets relative to each other and as a consequence, no shear transmission across the membrane. Our study sheds light on the physical principles governing the transfer of shear forces by and through lipid membranes, which underpin cell behavior and homeostasis.

Unveiling a Hidden Event in Fluorescence Correlative Microscopy by AFM Nanomechanical Analysis

Fluorescent imaging combined with atomic force microscopy (AFM), namely AFM-fluorescence correlative microscopy, is a popular technology in life science. However, the influence of involved fluorophores on obtained mechanical information is normally underestimated, and such subtle changes are still challenging to detect. Herein, we combined AFM with laser light excitation to perform a mechanical quantitative analysis of a model membrane system labeled with a commonly used fluorophore. Mechanical quantification was additionally validated by finite element simulations. Upon staining, we noticed fluorophores forming a diffuse weakly organized overlayer on phospholipid supported membrane, easily detected by AFM mechanics. The laser was found to cause a degradation of mechanical stability of the membrane synergically with presence of fluorophore. In particular, a 30 min laser irradiation, with intensity similar to that in typical confocal scanning microscopy experiment, was found to result in a ∼40% decrease in the breakthrough force of the stained phospholipid bilayer along with a ∼30% reduction in its apparent elastic modulus. The findings highlight the significance of analytical power provided by AFM, which will allow us to “see” the “unseen” in correlative microscopy, as well as the necessity to consider photothermal effects when using fluorescent dyes to investigate, for example, the deformability and permeability of phospholipid membranes.

Preparation of a PEGylated liposome that co-encapsulates l-arginine and doxorubicin to achieve a synergistic anticancer effect

Strategies that combine chemotherapies with unconventional agents such as nitric oxide (NO) have been shown to enhance cancer therapies. Compared with small molecule chemotherapy drugs, nanosized particles have improved therapeutic efficacies and reduced systemic side effects because of the enhanced permeability and retention effect. In this report, we prepared PEGylated liposomes (LP) that incorporated l-arginine (Arg) and the anticancer drug doxorubicin (Dox) to yield a co-delivery system (Dox–Arg-LP). On the basis of our previous research, we hypothesized that Dox–Arg-LP should achieve a synergistic anticancer effect because Arg conversion to NO by activated M1 macrophages augments the chemotherapeutic activity of Dox. Dox–Arg-LP showed comparable physical properties to those of conventional Dox-only liposomes (Dox-LP). In vitro assessment revealed that the cytotoxicity of Dox–Arg-LP toward cancer cells was significantly higher than that of Dox-LP. In vivo application of Dox–Arg-LP in mice enhanced the chemotherapeutic effect with a 2 mg kg⁻¹ dose of Dox–Arg-LP achieving the same therapeutic efficacy as a two-fold higher dose of Dox-LP (i.e., 4 mg kg⁻¹). Therefore, co-encapsulation of dual agents into a liposome formulation is an efficient strategy to enhance chemotherapy while reducing systemic toxicity.

Strategies that combine chemotherapies with unconventional agents such as nitric oxide (NO) have been shown to enhance cancer therapies.

Melatonin Alters Fluid Phase Coexistence in POPC/DPPC/Cholesterol Membranes

The structure and biophysical properties of lipid membranes are important for cellular functions in health and disease. In Alzheimer's disease, the neuronal membrane is a target for toxic amyloid-β (Aβ). Melatonin is an important pineal gland hormone that has been shown to protect against Aβ toxicity in cellular and animal studies, but the molecular mechanism of this protection is not fully understood. Melatonin is a small membrane-active molecule that has been shown to interact with model lipid membranes and alter the membrane biophysical properties, such as membrane molecular order and dynamics. This effect of melatonin has been previously studied in simple model bilayers with one or two lipid components. To make it more relevant to neuronal membranes, we used a more complex ternary lipid mixture as our membrane model. In this study, we used ²H-NMR to investigate the effect of melatonin on the phase behavior of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), and cholesterol lipid membranes. We used deuterium-labeled POPC-d₃₁ and DPPC-d₆₂,separately to probe the changes in hydrocarbon chain order as a function of temperature and melatonin concentration. We find that POPC/DPPC/cholesterol at molar proportions of 3:3:2 is close to liquid-disordered/liquid-ordered phase separation and that melatonin can induce phase separation in these ternary mixtures by preferentially incorporating into the disordered phase and increasing its level of disorder. At 5 mol% melatonin, we observed phase separation in samples with POPC-d₃₁, but not with DPPC-d₆₂, whereas at 10 mol% melatonin, phase separation was observed in both samples with either POPC-d₃₁ or DPPC-d₆₂. These results indicate that melatonin can have a strong effect on membrane structure and physical properties, which may provide some clues to understanding how melatonin protects against Aβ, and that choice of chain perdeuteration is an important consideration from a technical point of view.

Dry Two-Step Self-Assembly of Stable Supported Lipid Bilayers on Silicon Substrates

Artificial membranes are models for biological systems and are important for applications. We introduce a dry two-step self-assembly method consisting of the high-vacuum evaporation of phospholipid molecules over silicon, followed by a subsequent annealing step in air. We evaporate dipalmitoylphosphatidylcholine (DPPC) molecules over bare silicon without the use of polymer cushions or solvents. High-resolution ellipsometry and AFM temperature-dependent measurements are performed in air to detect the characteristic phase transitions of DPPC bilayers. Complementary AFM force-spectroscopy breakthrough events are induced to detect single- and multi-bilayer formation. These combined experimental methods confirm the formation of stable non-hydrated supported lipid bilayers with phase transitions gel to ripple at 311.5 ± 0.9 K, ripple to liquid crystalline at 323.8 ± 2.5 K and liquid crystalline to fluid disordered at 330.4 ± 0.9 K, consistent with such structures reported in wet environments. We find that the AFM tip induces a restructuring or intercalation of the bilayer that is strongly related to the applied tip-force. These dry supported lipid bilayers show long-term stability. These findings are relevant for the development of functional biointerfaces, specifically for fabrication of biosensors and membrane protein platforms. The observed stability is relevant in the context of lifetimes of systems protected by bilayers in dry environments.

Lipid bilayers: Phase behavior and nanomechanics

Lipid membranes are involved in many physiological processes like recognition, signaling, fusion or remodeling of the cell membrane or some of its internal compartments. Within the cell, they are the ultimate barrier, while maintaining the fluidity or flexibility required for a myriad of processes, including membrane protein assembly. The physical properties of in vitro model membranes as model cell membranes have been extensively studied with a variety of techniques, from classical thermodynamics to advanced modern microscopies. Here we review the nanomechanics of solid-supported lipid membranes with a focus in their phase behavior. Relevant information obtained by quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM) as complementary techniques in the nano/mesoscale interface is presented. Membrane morphological and mechanical characterization will be discussed in the framework of its phase behavior, phase transitions and coexistence, in simple and complex models, and upon the presence of cholesterol.

Structure of supported DPPC/cholesterol bilayers studied via X-ray reflectivity

The electron density profile of bilayers of DPPC/cholesterol mixtures supported on semiconductor grade silicon substrates were studied with the objective of determining how the proximity of a solid interface modifies the phase diagram of mixed bilayers. The bilayers were studied in situ immersed in water via synchrotron X-ray reflectivity (XRR). Measurements were performed as a function of temperature through the main phase transition and cholesterol mole fractions up to 40%. Analysis of XRR yields the bilayer thickness, roughness and leaflet asymmetry. We find that the structure of the pure DPPC bilayers in the gel phase is in agreement with previous X-ray measurements of supported bilayers deposited via vesicle fusion and multilamellar vesicles but show more clearly defined features than measurements made on films formed using Langmuir-Blodget Langmuir-Shaffer (LB) deposition. Examination of bilayer thickness vs. temperature shows that the melting temperature for supported bilayers is shifted upwards by approximately 4 °C relative to multilamellar vesicles and that the melting temperature decreases with increasing cholesterol content up to 20%. For pure DPPC bilayers the leaflets melt in two stages with the distal leaflet melting first. For cholesterol concentrations of 10% and 20% there is no clear indication of separate melting. For 33% and 40% cholesterol content no clear transition is seen in the bilayer thickness, but an abrupt change in roughness indicates possible microdomain formation in the 40% cholesterol sample.

On the Origin of the Anomalous Behavior of Lipid Membrane Properties in the Vicinity of the Chain-Melting Phase Transition

Biomembranes are key objects of numerous studies in biology and biophysics of great importance to medicine. A few nanometers thin quasi two-dimensional liquid crystalline membranes with bending rigidity of a few kT exhibit unusual properties and they are the focus of theoretical and experimental physics. The first order chain-melting phase transition of lipid membranes is observed to be accompanied by a pseudocritical behavior of membrane physical-chemical properties. However, the investigation of the nature of the anomalous swelling of a stack of lipid membranes in the vicinity of the transition by different groups led to conflicting conclusions about the level of critical density fluctuations and their impact on the membrane softening. Correspondingly, conclusions about the contribution of Helfrich's undulations to the effect of swelling were different. In our work we present a comprehensive complementary neutron small-angle and spin-echo study directly showing the presence of significant critical fluctuations in the vicinity of the transition which induce membrane softening. However, contrary to the existing paradigm, we demonstrate that the increased undulation forces cannot explain the anomalous swelling. We suggest that the observed effect is instead determined by the dominating increase of short-range entropic repulsion.

Protein Structure Prediction and Design in a Biologically Realistic Implicit Membrane

Protein design is a powerful tool for elucidating mechanisms of function and engineering new therapeutics and nanotechnologies. Although soluble protein design has advanced, membrane protein design remains challenging because of difficulties in modeling the lipid bilayer. In this work, we developed an implicit approach that captures the anisotropic structure, shape of water-filled pores, and nanoscale dimensions of membranes with different lipid compositions. The model improves performance in computational benchmarks against experimental targets, including prediction of protein orientations in the bilayer, ΔΔG calculations, native structure discrimination, and native sequence recovery. When applied to de novo protein design, this approach designs sequences with an amino acid distribution near the native amino acid distribution in membrane proteins, overcoming a critical flaw in previous membrane models that were prone to generating leucine-rich designs. Furthermore, the proteins designed in the new membrane model exhibit native-like features including interfacial aromatic side chains, hydrophobic lengths compatible with bilayer thickness, and polar pores. Our method advances high-resolution membrane protein structure prediction and design toward tackling key biological questions and engineering challenges.

Structural evolution of supported lipid bilayers intercalated with quantum dots

HYPOTHESIS

Supported lipid bilayers (SLBs) embedded with hydrophobic quantum dots (QDs) undergo temporal structural rearrangement.

EXPERIMENTS

Synchrotron X-ray reflectivity (XRR) was applied to monitor the temporal structural changes over a period of 24 h of mixed SLBs of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) / 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-ethanolamine (POPE) intercalated with 4.9 nm hydrophobic cadmium sulphide quantum dots (CdS QDs). The QD-embedded SLBs (QD-SLBs) were formed via rupture of the mixed liposomes on a positively charged polyethylene imine (PEI) monolayer. Atomic force microscopy (AFM) imaging provided complementary characterization of the bilayer morphology.

FINDINGS

Our results show time-dependent perturbations in the SLB structure due to the interaction upon QD incorporation. Compared to the SLB without QDs, at 3 h incubation time, there was a measurable decrease in the bilayer thickness and a concurrent increase in the scattering length density (SLD) of the QD-SLB. The QD-SLB then became progressively thicker with increasing incubation time, which - along with the fitted SLD profile - was attributed to the structural rearrangement due to the QDs being expelled from the inner leaflet to the outer leaflet of the bilayer. Our results give unprecedented mechanistic insights into the structural evolution of QD-SLBs on a polymer cushion, important to their potential biomedical and biosensing applications.

Design and use of model membranes to study biomolecular interactions using complementary surface-sensitive techniques

Cellular membranes are complex structures and simplified analogues in the form of model membranes or biomembranes are used as platforms to understand fundamental properties of the membrane itself as well as interactions with various biomolecules such as drugs, peptides and proteins. Model membranes at the air-liquid and solid-liquid interfaces can be studied using a range of complementary surface-sensitive techniques to give a detailed picture of both the structure and physicochemical properties of the membrane and its resulting interactions. In this review, we will present the main planar model membranes used in the field to date with a focus on monolayers at the air-liquid interface, supported lipid bilayers at the solid-liquid interface and advanced membrane models such as tethered and floating membranes. We will then briefly present the principles as well as the main type of information on molecular interactions at model membranes accessible using a Langmuir trough, quartz crystal microbalance with dissipation monitoring, ellipsometry, atomic force microscopy, Brewster angle microscopy, Infrared spectroscopy, and neutron and X-ray reflectometry. A consistent example for following biomolecular interactions at model membranes is used across many of the techniques in terms of the well-studied antimicrobial peptide Melittin. The overall objective is to establish an understanding of the information accessible from each technique, their respective advantages and limitations, and their complementarity.

Fluorescent-Based Thermal Sensing in Lipid Membranes

Thermal mapping in biological membranes could unlock and help us understand many chemical and physical processes that do not only pertain to localized membrane phenomena but also extend to many other intra- and extracellular pathways. In this manuscript, we report the development of a ratiometric thermal fluorescent probe based on the Förster resonance energy transfer between a lipid-embedded conjugated polyelectrolyte and a lyophilic acceptor dye. We showed that the Förster resonance energy transfer (FRET) pair is sensitive within the relevant physiological temperature window (20.0-50.0 °C). The signal was also shielded from an external pH and stable when cycled multiple times. The probe was also sensitive to the membrane composition and could, therefore, be further developed to probe the membrane composition and viscosity.

Annexin-V stabilizes membrane defects by inducing lipid phase transition

Annexins are abundant cytoplasmic proteins, which bind to membranes that expose negatively charged phospholipids in a Ca²⁺-dependent manner. During cell injuries, the entry of extracellular Ca²⁺ activates the annexin membrane-binding ability, subsequently initiating membrane repair processes. However, the mechanistic action of annexins in membrane repair remains largely unknown. Here, we use high-speed atomic force microscopy (HS-AFM), fluorescence recovery after photobleaching (FRAP), confocal laser scanning microscopy (CLSM) and molecular dynamics simulations (MDSs) to analyze how annexin-V (A5) binds to phosphatidylserine (PS)-rich membranes leading to high Ca²⁺-concentrations at membrane, and then to changes in the dynamics and organization of lipids, eventually to a membrane phase transition. A5 self-assembly into lattices further stabilizes and likely structures the membrane into a gel phase. Our findings are compatible with the patch resealing through vesicle fusion mechanism in membrane repair and indicate that A5 retains negatively charged lipids in the inner leaflet in an injured cell.

Annexins are cytoplasmic proteins, which bind to membranes exposing negatively charged phospholipids in a Ca²⁺-dependent manner. Here the authors use high-speed atomic force microscopy and other techniques to show that annexin-V self-assembles into highly structured lattices that lead to a membrane phase transition on PS-rich membranes.

Visualization and measurement of the local absorption coefficients of single bilayer phospholipid membranes using scanning near-field optical microscopy

Here we report the results of shear-mode thicknesses and absorption coefficient measurements made on neat membranes using scanning near-field optical microscopy (SNOM). Biomimic neat membranes composed of two different types of phoshpholipid molecules: 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2- dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) were found to exhibit different absorption coefficients under the SNOM. The localization of the lipids could be identified and correlated to the morphology of the membrane domains indicating that SNOM can be an effective and accurate approach for the label-free characterization of the structure-function relationships in cell membranes.

Development of high-speed ion conductance microscopy

Scanning ion conductance microscopy (SICM) can image the surface topography of specimens in ionic solutions without mechanical probe-sample contact. This unique capability is advantageous for imaging fragile biological samples but its highest possible imaging rate is far lower than the level desired in biological studies. Here, we present the development of high-speed SICM. The fast imaging capability is attained by a fast Z-scanner with active vibration control and pipette probes with enhanced ion conductance. By the former, the delay of probe Z-positioning is minimized to sub-10 µs, while its maximum stroke is secured at 6 μm. The enhanced ion conductance lowers a noise floor in ion current detection, increasing the detection bandwidth up to 100 kHz. Thus, temporal resolution 100-fold higher than that of conventional systems is achieved, together with spatial resolution around 20 nm.

Lipid Bilayer Thickness Measured by Quantitative DIC Reveals Phase Transitions and Effects of Substrate Hydrophilicity

Quantitative differential interference contrast microscopy is demonstrated here as a label-free method, which is able to image and measure the thickness of lipid bilayers with 0.1 nm precision. We investigate the influence of the substrate on the thickness of fluid-phase 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)-supported lipid bilayers and find a thinning of up to 10%, depending on substrate hydrophilicity, local bilayer coverage, and ionic strength of the medium. With fluorescently labeled lipid bilayers, we also observe changes in the bilayer thickness depending on the choice of fluorophore. Furthermore, liquid-ordered domains in bilayers, formed from DOPC, cholesterol, and sphingomyelin, are measured, and the corresponding thickness change between the liquid-ordered and liquid-disordered phases is accurately determined. Again, the thickness difference is found to be dependent on the presence of the fluorophore label, highlighting the need for quantitative label-free techniques.

Selective Isotopic Labeling Resolves the Gel-to-Fluid Phase Transitions of the Individual Leaflets of a Planar-Supported Phospholipid Bilayer

Knowledge of the thermotropic phase behavior of solid-supported bilayer lipid assemblies is essential to mimick the molecular organization and lateral fluidity of cell membranes. The gel-to-fluid phase transitions in a homologous series of single phospholipid bilayers supported on planar silicon substrates were investigated by temperature-controlled atomic force microscopy and attenuated total reflection infrared spectroscopy to obtain complementary information at the mesoscopic and molecular scales. Symmetric bilayers of dipalmitoylphosphatidylcholine (DPPC) and vertically asymmetric bilayers composed of a leaflet of DPPC and another of acyl-chain-deuterated DPPC (DPPC-d₆₂) were prepared by the Langmuir-Blodgett technique. The selective deuteration of one of the bilayer leaflets enabled the simultaneous monitoring by IR spectroscopy of the acyl chain melting in each leaflet via the spectrally isolated CH₂ and CD₂ stretching vibrations. Two gel-to-fluid transitions were discerned for both the symmetric and asymmetric bilayers in ultrapure water. The deuterium isotope effect observed in free-standing membranes was maintained for the supported bilayers. IR spectroscopy revealed that the melting of one leaflet promotes the disordering of the acyl chains in the adjacent one. The findings suggest that the two leaflet phase transitions do not evolve in isolation. This work sheds insight into the nature of leaflet-leaflet interactions and the thermodynamic properties of surface-confined phospholipid bilayers.

Disruption of giant unilamellar vesicles mimicking cell membranes induced by the pesticides glyphosate and picloram

Giant unilamellar vesicles (GUVs) have been one of the most extensively investigated membrane model to study cell membrane-ligand interactions. In this study, we investigated the interaction between glyphosate and picloram with GUVs made with sphingomyelin (SM), cholesterol (CHOL), and dioleoyl-sn-glycerol-3-phosphocholine (DOPC) (DOPC/SM (1:1), DOPC/CHOL/SM (1:1:1)) in a physiological environment using confocal and phase contrast microscopy. At high pesticide concentrations (70 to 90 μM), we generally found the GUVs undergoing a physical such as contouring, elongation, and eventually lose their characteristic spherical shape. In addition, to determine the comparative effect of the pesticides, control experiments were performed using GUVs made with only DOPC and DOPC/SM 1:1. The results show that, at low concentration (0.5 μM), a significant effect was observed during a 30 min incubation time. These findings also suggest that cholesterol may play a significant role in the permeability of the vesicle against the action of the pesticides, which have important biological implications on the lipid composition of the membrane.

Phase Transitions in a Single Supported Phospholipid Bilayer: Real-Time Determination by Neutron Reflectometry

Time- and temperature-resolved neutron reflectometry allowed us to perform the real-time characterization of the structural changes taking place across phase transitions in solid supported-lipid bilayers (SLBs). We identified the presence of an isothermal phase transition, characterized by a symmetrical rearrangement of lipid molecules in both bilayer leaflets, followed by the main thermotropic phase transition, and characterized by an independent melting of the two leaflets. We demonstrated that the presence of a substrate increases the enthalpy of melting by the same amount for both SLB leaflets with respect to the values reported for freestanding bilayers. These results are highly relevant for the further understanding of cooperative structural dynamics in SLBs and for the investigation of thermally activated processes such as the transmembrane lipid translocation (flip flop).

Sensing Ability and Formation Criterion of Fluid Supported Lipid Bilayer Coated Graphene Field-Effect Transistors

Supported lipid bilayers (SLBs) have been widely used to provide native environments for membrane protein studies. In this study, we utilized graphene field-effect transistors (GFETs) coated with a fluid SLB to perform label-free detection of membrane-associated ligand-receptor interactions in their native lipid bilayer environment. It is known that the analyte-binding event needs to occur within the Debye length for it to be significantly sensed by an FET sensor. However, the thickness of a lipid bilayer is around 4-5-nm-thick, which is larger than the Debye length of a solution with physiologically relevant ionic strength. There is thus a question of whether an FET sensor can detect the binding event above the bilayer. In this study, we show how the existence of an SLB can influence the effective detection distance and the formation criterion of a fluid and continuous SLB on a graphene surface. We discovered that the water intercalation between the graphene and the underlying silica substrate hinders the SLB formation but is required for the stable electrical recording by a GFET. To verify the existence of a fluid SLB on graphene, which was previously complicated by the graphene fluorescence quenching effect, we developed a modified fluorescence recovery after photobleaching method. In addition, our results showed that SLB coated GFETs can quantitatively detect ligand binding onto the receptors embedded in the SLBs. The comparison of our experimental data with a theoretical model shows that the contribution of the SLB acyl chain hydrophobic region to the screening effect can be negligible and, therefore, that the effective detection region can extend beyond the SLB.

Nanocapsules for Programmed Neurotransmitter Release: Toward Artificial Extracellular Synaptic Vesicles

Nanocapsules present a promising platform for delivering chemicals and biomolecules to a site of action in a living organism. Because the biological action of the encapsulated molecules is blocked until they are released from the nanocapsules, the encapsulation structure enables triggering of the topical and timely action of the molecules at the target site. A similar mechanism seems promising for the spatiotemporal control of signal transduction triggered by the release of signal molecules in neuronal, metabolic, and immune systems. From this perspective, nanocapsules can be regarded as practical tools to apply signal molecules such as neurotransmitters to intervene in signal transduction. However, spatiotemporal control of the payload release from nanocapsules persists as a key technical issue. Stimulus-responsive nanocapsules that release payloads in response to external input of physical stimuli are promising platforms to enable programmed payload release. These programmable nanocapsules encapsulating neurotransmitters are expected to lead to new insights and perspectives related to artificial extracellular synaptic vesicles that might provide an experimental and therapeutic strategy for neuromodulation and nervous system disorders.

Conformational Space of a Polyphilic Molecule with a Fluorophilic Side Chain Integrated in a DPPC Bilayer

We investigate the conformational space of a polyphilic molecule with hydrophilic, lipophilic and fluorophilic parts inserted as a transmembrane agent into a dipalmitoylphosphatidylcholine bilayer by means of all-atom molecular dynamics simulations. Special focus is put on the competing structural driving forces arising from the hydrophilic, lipophilic and fluorophilic side chains and the aromatic backbone of the polyphile. We observe a significant difference between the lipophilic and the fluorophilic side chains regarding their intramembrane distribution. While the lipophilic groups remain membrane-centered, the fluorophilic parts tend to orient toward the phosphate headgroups. This trend is important for understanding the influence of polyphile agents on the properties of phospholipid membranes. From a fundamental point of view, our computed distribution functions of the side chains are related to the interplay of sterical, enthalpic and entropic driving forces. Our findings illustrate the potential of rationally designed membrane additives which can be exploited to tune the properties of phospholipid membranes. © 2017 Wiley Periodicals, Inc.

Molecular diffusion and nano-mechanical properties of multi-phase supported lipid bilayers

Understanding the properties of cell membranes is important in the fields of fundamental and applied biology.