Enhanced dissolution and oral absorption of tacrolimus by supersaturable self-emulsifying drug delivery system

Lipid-based systems with precipitation inhibitors as formulation approach to improve the drug bioavailability and/or lower its dose: a review

Lipid-based systems, such as self-microemulsifying systems (SMEDDS) are attracting strong attention as a formulation approach to improve the bioavailability of poorly water-soluble drugs. By applying the "spring and parachute" strategy in designing supersaturable SMEDDS, it is possible to maintain the drug in the supersaturated state long enough to allow absorption of the complete dose, thus improving the drug's bio-availability. As such an approach allows the incorporation of larger amounts of the drug in equal or even lower volumes of SMEDDS, it also enables the production of smaller final dosage forms as well as decreased gastrointestinal irritation, being of particular importance when formulating dosage forms for children or the elderly. In this review, the technological approaches used to prolong the drug supersaturation are discussed regarding the type and concentration of polymers used in liquid and solid SMEDDS formulation. The addition of hypromellose derivatives, vinyl polymers, polyethylene glycol, polyoxyethylene, or polymetacrylate copolymers proved to be effective in inhibiting drug precipitation. Regarding the available literature, hypromellose has been the most commonly used polymeric precipitation inhibitor, added in a concentration of 5 % (m/m). However, the inhibiting ability is mainly governed not only by the physicochemical properties of the polymer but also by the API, therefore the choice of optimal precipitation inhibitor is recommended to be evaluated on an individual basis.

Prospective population pharmacokinetic study of tacrolimus in adult recipients early after liver transplantation: A comparison of Michaelis-Menten and theory-based pharmacokinetic models

Background and Objective: Tacrolimus, a calcineurin inhibitor widely used as a potent immunosuppressant to prevent graft rejection, exhibits nonlinear kinetics in patients with kidney transplantation and nephrotic syndrome. However, whether nonlinear drug metabolism occurs in adult patients undergoing liver transplantation remains unclear, as do the main underlying mechanisms. Therefore, here we aimed to further confirm the characteristics of nonlinearity through a large sample size, and determine the potential influence of nonlinearity and its possible mechanisms.

Methods: In total, 906 trough concentrations from 176 adult patients (150 men/26 women; average age: 50.68 ± 9.71 years, average weight: 64.54 ± 11.85 kg after first liver transplantation) were included in this study. Population pharmacokinetic analysis was performed using NONMEM®. Two modeling strategies, theory-based linear compartmental and nonlinear Michaelis–Menten (MM) models, were evaluated and compared. Potential covariates were screened using a stepwise approach. Bootstrap, prediction-, and simulation-based diagnostics (prediction-corrected visual predictive checks) were performed to determine model stability and predictive performance. Finally, Monte Carlo simulations based on the superior model were conducted to design dosing regimens.

Results: Postoperative days (POD), Aspartate aminotransferase (AST), daily tacrolimus dose, triazole antifungal agent (TAF) co-therapy, and recipient CYP3A5*3 genotype constituted the main factors in the theory-based compartmental final model, whereas POD, Total serum bilirubin (TBIL), Haematocrit (HCT), TAF co-therapy, and recipient CYP3A5*3 genotype were important in the nonlinear MM model. The theory-based final model exhibited 234 L h−1 apparent plasma clearance and 11,000 L plasma distribution volume. The maximum dose rate (Vmax) of the nonlinear MM model was 6.62 mg day−1; the average concentration at steady state at half-Vmax (Km) was 6.46 ng ml−1. The nonlinear MM final model was superior to the theory-based final model and used to propose dosing regimens based on simulations.

Conclusion: Our findings demonstrate that saturated tacrolimus concentration-dependent binding to erythrocytes and the influence of daily tacrolimus dose on metabolism may partly contribute to nonlinearity. Further investigation is needed is need to explore the causes of nonlinear pharmacokinetic of tacrolimus. The nonlinear MM model can provide reliable support for tacrolimus dosing optimization and adjustment in adult patients undergoing liver transplantation.

Lipid-based solubilization technology via hot melt extrusion: promises and challenges

INTRODUCTION

Self-emulsifying drug delivery systems (SEDDS) are a promising strategy to improve the oral bioavailability of poorly water-soluble drugs (PWSD). The excipients of SEDDS enable permeation through the mucus and gastro-intestinal barrier, inhibiting efflux transporters (e.g. P-glycoprotein) of drugs. Poor drug loading capacity and formulation instability are the main setbacks of traditional SEDDS. The use of polymeric precipitation inhibitors was shown to create supersaturable SEDDS with increased drug payload, and their solidification can help to overcome the instability challenge. As an alternative to several existing SEDDS solidification technologies, hot melt extrusion (HME) holds the potential for lean and continuous manufacturing of supersaturable solid-SEDDS. Despite being ubiquitously applied in solid lipid and polymeric processing, HME has not yet been widely considered for the preparation of SEDDS.

AREAS COVERED

The review begins with the rationale why SEDDS as the preferred lipid-based delivery systems (LBDS) is suitable for the oral delivery of PWSD and discusses the common barriers to oral administration. The potential of LBDS to surmount them is discussed. SEDDS as the flagship of LBDS for PWSD is proposed with a special emphasis on solid-SEDDS. Finally, the opportunities and challenges of HME from the lipid-based excipient (LBE) processing and product performance standpoint are highlighted.

EXPERT OPINION

HME can be a continuous, solvent-free, cost-effective, and scalable technology for manufacturing solid supersaturable SEDDS. Several critical formulations and process parameters in successfully preparing SEDDS via HME are identified.

Wuzhi Capsule Dosage Affects Tacrolimus Elimination in Adult Kidney Transplant Recipients, as Determined by a Population Pharmacokinetics Analysis

Purpose

In this study, we aimed to establish a tacrolimus population pharmacokinetic model and better understand the drug-drug interaction between Wuzhi capsule and tacrolimus in Chinese renal transplant recipients.

Patients and Methods

We performed a population pharmacokinetic analysis using a non-linear mixed-effects model to determine the suitable Wuzhi capsule dose in combination with tacrolimus. Data on 1378 tacrolimus steady-state concentrations were obtained from 142 patients who received kidney transplant in Changhai Hospital and Huashan Hospital. Demographic characteristics, laboratory tests, genetic polymorphisms, and co-medications were evaluated.

Results

The one-compartment model best described data. Our final model identified creatinine clearance rate, hematocrit, Wuzhi capsule dose, CYP3A5*3 genetic polymorphisms, and tacrolimus daily dose as significant covariates for tacrolimus clearance, with the value of 14.4 L h^-1, and the between-subject variability (BSV) was 25.4%. The Wuzhi capsule showed a dose-dependent effect on tacrolimus pharmacokinetics, demonstrating a stronger inhibitory effect than inductive effect.

Conclusion

Our model can accurately describe population pharmacokinetics of tacrolimus when combined with different doses of Wuzhi capsule. Additionally, this model can be used for individualizing tacrolimus dose following kidney transplantation.

Digestion of Lipid-Based Formulations Not Only Mediates Changes to Absorption of Poorly Soluble Drugs Due to Differences in Solubilization But Also Reflects Changes to Thermodynamic Activity and Permeability

The aim of this study was to evaluate the effect of lipid digestion on the permeability and absorption of orally administered saquinavir (SQV), a biopharmaceutics classification system (BCS) class IV drug, in different lipid-based formulations. Three LBFs were prepared: a mixed short- and medium-chain lipid-based formulation (SMCF), a medium-chain lipid-based formulation (MCF), and a long-chain lipid-based formulation (LCF). SQV was loaded into these LBFs at 26.7 mg/g. To evaluate the pharmacokinetics of SQV in vivo, drug-loaded formulations were predispersed in purified water at 3% w/w and orally administered to rats. A low dose (0.8 mg/rat) was employed to limit confounding effects on drug solubilization, and consistent with this design, presolubilization of SQV in the LBFs did not increase in vivo exposure compared to a control suspension formulation. The areas under the plasma concentration-time curve were, however, significantly lower after administration of SQV as MCF and LCF compared to SMCF. To evaluate the key mechanisms underpinning absorption, each LBF containing SQV was digested, and the flux of SQV from the digests across a dialysis membrane was evaluated in in vitro permeation experiments. This study revealed that the absorption profiles were driven by the free concentration of SQV and that this varied due to differences in SQV solubilization in the digestion products generated by LBF digestion. The apparent first-order permeation rate constants of SQV (k_app,total) were estimated by dividing the flux of SQV in the dialysis membrane experiments by the concentration of total SQV on the donor side. k_app,total values strongly correlated with in vivo AUC. The data provide one of the first studies of the effect of digestion products on the free concentration of a drug in the GI fluid and oral absorption. This simple permeation model may be a useful tool for the evaluation of the impact of lipid digestion on apparent drug permeability from lipid-based formulations. These effects should be assessed alongside, and in addition to, the more well-known effects of lipids on enhancing intestinal solubilization of poorly water-soluble drugs.

Development of a Solid Supersaturable Micelle of Revaprazan for Improved Dissolution and Oral Bioavailability Using Box-Behnken Design

PURPOSE

To enhance the oral bioavailability of revaprazan (RVP), a novel solid, supersaturable micelle (SSuM) was developed.

METHODS

Surfactants and solid carriers were screened based on a solubility and a flowability test, respectively. Supersaturating agents, including Poloxamer 407 (P407), were screened. The SSuM was optimized using a Box-Behnken design with three independent variables, including Gelucire 44/14:Brij L4 (G44/BL4; X1) and the amounts of Florite PS-10 (FLO; X2) and Vivapur 105 (VP105; X3), and three response variables, ie, dissolution efficiency at 30 min (Y1), dissolution enhancing capacity (Y2), and Carr's index (Y3). The solid state property was evaluated, and a dissolution test was conducted. RVP, Revanex®, solid micelle (P407-free from the composition of SSuM), and SSuM were orally administrated to rats (RVP 20 mg equivalent/kg) for in vivo pharmacokinetic study.

RESULTS

G44 and BL4 showed great solubility, with a critical micelle concentration range of 119.2-333.0 μg/mL. P407 had an excellent supersaturating effect. FLO and VP105 were selected as solid carriers, with a critical solidifying ratio (g/mL) of 0.30 and 0.91, respectively. With optimized values of X1 (-0.41), X2 (0.31), and X3 (-0.78), RVP (200 mg)-containing SSuM consisting of G44 (253.8 mg), BL4 (106.2 mg), FLO (99.3 mg), VP105 (199.8 mg), and P407 (40 mg) was developed, resulting in Y1 (40.3%), Y2 (0.008), and Y3 (12.3%). RVP existed in an amorphous state in the optimized SSuM, and the SSuM formed a nanosized dispersion in the aqueous phase, with approximately 71.7% dissolution at 2 h. The optimized SSuM improved the relative bioavailability of RVP in rats by approximately 478%, 276%, and 161% compared to raw RVP, Revanex®, and solid micelle, respectively.

CONCLUSION

The optimized SSuM has great potential for the development of solidified formulations of poorly water-soluble drugs with improved oral absorption.

3D Printed Tacrolimus Rectal Formulations Ameliorate Colitis in an Experimental Animal Model of Inflammatory Bowel Disease

The aim of this study was to fabricate novel self-supporting tacrolimus suppositories using semisolid extrusion 3-dimensional printing (3DP) and to investigate their efficacy in an experimental model of inflammatory bowel disease. Blends of Gelucire 44/14 and coconut oil were employed as lipid excipients to obtain suppository formulations with self-emulsifying properties, which were then tested in a TNBS (2,4,6-trinitrobenzenesulfonic acid) induced rat colitis model. Disease activity was monitored using PET/CT medical imaging; maximum standardized uptake values (SUVmax), a measure of tissue radiotracer accumulation rate, together with body weight changes and histological assessments, were used as inflammatory indices to monitor treatment efficacy. Following tacrolimus treatment, a significant reduction in SUVmax was observed on days 7 and 10 in the rat colon sections compared to non-treated animals. Histological analysis using Nancy index confirmed disease remission. Moreover, statistical analysis showed a positive correlation (R2 = 71.48%) between SUVmax values and weight changes over time. Overall, this study demonstrates the effectiveness of 3D printed tacrolimus suppositories to ameliorate colitis and highlights the utility of non-invasive PET/CT imaging to evaluate new therapies in the preclinical area.

Current Status of Supersaturable Self-Emulsifying Drug Delivery Systems

Self-emulsifying drug delivery systems (SEDDSs) are a vital strategy to enhance the bioavailability (BA) of formulations of poorly water-soluble compounds. However, these formulations have certain limitations, including in vivo drug precipitation, poor in vitro in vivo correlation due to a lack of predictive in vitro tests, issues in handling of liquid formulation, and physico-chemical instability of drug and/or vehicle components. To overcome these limitations, which restrict the potential usage of such systems, the supersaturable SEDDSs (su-SEDDSs) have gained attention based on the fact that the inclusion of precipitation inhibitors (PIs) within SEDDSs helps maintain drug supersaturation after dispersion and digestion in the gastrointestinal tract. This improves the BA of drugs and reduces the variability of exposure. In addition, the formulation of solid su-SEDDSs has helped to overcome disadvantages of liquid or capsule dosage form. This review article discusses, in detail, the current status of su-SEDDSs that overcome the limitations of conventional SEDDSs. It discusses the definition and range of su-SEDDSs, the principle mechanisms underlying precipitation inhibition and enhanced in vivo absorption, drug application cases, biorelevance in vitro digestion models, and the development of liquid su-SEDDSs to solid dosage forms. This review also describes the effects of various physiological factors and the potential interactions between PIs and lipid, lipase or lipid digested products on the in vivo performance of su-SEDDSs. In particular, several considerations relating to the properties of PIs are discussed from various perspectives.

Supersaturated polymeric micelles for oral silybin delivery: the role of the Soluplus-PVPVA complex

Increasing the degree of supersaturation of drugs and maintaining their proper stability are very important in improving the oral bioavailability of poorly soluble drugs by a supersaturated drug delivery system (SDDS). In this study, we reported a complex system of Soluplus–Copovidone (Soluplus–PVPVA) loaded with the model drug silybin (SLB) that could not only maintain the stability of a supersaturated solution but also effectively promote oral absorption. The antiprecipitation effect of the polymers on SLB was observed using the solvent-shift method. In addition, the effects of the polymers on absorption were detected by cellular uptake and transport experiments. The mechanisms by which the Soluplus–PVPVA complex promotes oral absorption were explored by dynamic light scattering, transmission electron microscopy, fluorescence spectra and isothermal titration calorimetry analyses. Furthermore, a pharmacokinetic study in rats was used to demonstrate the advantages of the Soluplus–PVPVA complex. The results showed that Soluplus and PVPVA spontaneously formed complexes in aqueous solution via the adsorption of PVPVA on the hydrophilic-hydrophobic interface of the Soluplus micelle, and the Soluplus–PVPVA complex significantly increased the absorption of SLB. In conclusion, the Soluplus–PVPVA complex is a potential SDDS for improving the bioavailability of hydrophobic drugs.

Supersaturable Self-Emulsifying Drug Delivery System of Krill Oil with Improved Oral Absorption and Hypotriglyceridemic Function

This study aimed to develop a supersaturable self-emulsifying drug delivery system (S-SEDDS) of krill oil (KO), a rich source of docosahexaenoic acid and eicosapentaenoic acid (EPA), to improve its hypotriglyceridemic function. S-SEDDS of KO (KO/S-SEDDS) was prepared by the addition of lysolecithin, glycerin, and hydroxypropyl methylcellulose (HPMC). Self-emulsifying drug delivery system of KO (KO/SEDDS) and KO with HPMC (KO/HPMC) were also prepared for comparison purposes. The physicochemical and pharmacokinetic properties of KO samples were characterized, and the hypotriglyceridemic function of KO/S-SEDDS was evaluated. Micronized droplets in KO/SEDDS and KO/S-SEDDS with a mean diameter of ca. 270 nm could be observed in comparison to KO and KO/HPMC. Both KO/HPMC and KO/S-SEDDS tended to enhance the dissolution behavior of KO, and the S-SEDDS formulation improved the dissolution behavior of KO as a result of micronized droplets and the addition of HPMC. KO/S-SEDDS (60 mg of EPA/kg) improved the oral absorption of KO based on the pharmacokinetic profiling of EPA, and repeated oral administration of KO/S-SEDDS (250 mg of KO kg^-1 day^-1) for 7 days had a potent hypotriglyceridemic effect on rats with corn-oil-induced hypertriglyceridemia compared to orally administered KO. On the basis of these findings, the S-SEDDS approach might be an efficacious dosage option to enhance the nutraceutical properties of KO.

Supersaturable solid self-microemulsifying drug delivery system: precipitation inhibition and bioavailability enhancement

Solid self-emulsifying drug delivery system (SSEDDS), which incorporates liquid SEDDS into a solid dosage form, has been recently introduced to improve the oral bioavail-ability of poorly water-soluble drugs. However, supersaturated drug generated by SSEDDS is thermodynamically unstable and tends to precipitate rapidly prior to absorption, resulting in compromised bioavailability. The aim of this study was to construct a novel supersaturated SSEDDS (super-SSEDDS) by combining SSEDDS with appropriate precipitation inhibitor. Fenofibrate (FNB), a sparingly soluble drug, was selected as a model drug in this study. An optimized SSEDDS was prepared by solvent evaporation by using mesoporous silica Santa Barbara Amorphous-15 as the inert carrier. Supersaturation assay was conducted to evaluate the precipitation inhibition capacity of different polymers, and the results showed that Soluplus^® could retard the FNB precipitation more effectively and sustain a higher apparent concentration for ~120 min. This effect was also clearly observed in the dissolution profiles of FNB from SSEDDS under supersaturated condition. The study of the mechanism suggested that the inhibition effect might be achieved both thermodynamically and kinetically. The area under the concentration–time curve of the super-SSEDDS was 1.4-fold greater than that of SSEDDS in the absence of Soluplus, based on an in vivo pharmacokinetic study conducted in beagle dogs. This study has demonstrated that the approach of combining SSEDDS with Soluplus as a supersaturation stabilizer constitutes a potential tool to improve the absorption of poorly water-soluble drugs.