Support for the initial attachment, growth and differentiation of MG-63 cells: a comparison between nano-size hydroxyapatite and micro-size hydroxyapatite in composites

Synthesis, Characterization, and Osteogenic Ability of Fibrillar Polycaprolactone Scaffolds Containing Hydroxyapatite Nanoparticles

Polymer-based scaffolds for bone regeneration aim to mimic the structure and function of the collagen-rich extracellular matrix. Hydroxyapatite incorporated into these biomaterials improves their mechanical and biological properties due to its bioactive osteoconductive nature. The objectives of this study are to synthesize and characterize polycaprolactone (PCL) scaffolds containing hydroxyapatite nanoparticles (HAn) at 1, 2.5, 5, and 7% concentrations and to determine their cytocompatibility and osteogenic potential. Fiber thickness (n = 240) and interfibrillar space (n = 8) of PCL scaffolds were characterized by scanning electron microscopy (SEM). The PCL scaffolds were evaluated concerning their thermal degradation (TGA), calcium release, and hydrophilicity (WCA). Preosteoblasts were seeded on PCL scaffolds and assessed regarding their viability (AlamarBlue, n = 8), collagen synthesis (SR, n = 8), total protein synthesis (TP, n = 8), alkaline phosphatase activity (ALP, n = 8), deposition of mineralization nodules (MN, n = 8), and cell adhesion (fluorescence microscopy). The data analyses of the biomaterials, including TGA, energy dispersive spectroscopy (EDS), and Fourier transform infrared spectroscopy (FTIR), were interpreted descriptively. The quantitative data were statistically analyzed (α = 5%). Scaffolds without HAn exhibited thicker fibers. The higher incorporation of HAn in the PCL scaffolds increased the interfibrillar spaces and resulted in greater P and Ca peaks (p < 0.05), as well as broader peaks representing the P-O group (FTIR). TGA demonstrated that PCL scaffold degradation was inversely proportional to their HAn concentration. Higher percentages of cell viability were observed with the incorporation of HAn. ALP activity increased in cells seeded onto PCL scaffolds containing 2.5% HAn. Deposition of MN was directly proportional to the amount of HAn incorporated. HAn incorporated into PCL scaffolds interferes with the physicochemical properties of these biomaterials and favors in vitro osteogenesis.

Biocompatibility and dimensional stability through the use of 3D-printed scaffolds made by polycaprolactone and bioglass-7: An in vitro and in vivo study

PURPOSE

This experiment aimed to observe the differences in biological properties by producing BGS-7 + PCL scaffolds with different weight fractions of BGS-7 through 3D printing and to confirm whether using the scaffold for vertical bone augmentation is effective.

MATERIALS AND METHODS

Cube-shaped bioglass (BGS-7) and polycaprolactone (PCL) scaffolds with different weight fractions (PCL alone, PCL with 15% and 30% BGS-7) are produced using 3D printing. The surface hydroxyapatite (HA) apposition, the pH change, proliferation and attachment assays, and various gene expression levels are assessed. After a 7-mm implant was inserted 3 mm into the rabbit calvaria, vertical bone augmentation is performed around the implant and inside the scaffold in four ways: scaffold only, scaffold+bone graft, bone graft only, and no graft. Sacrifice is performed at 6, 12, and 24 weeks, and the various parameters are compared radiographically and histologically.

RESULTS

HA apposition, cell proliferation, cell attachment, and expression of osteogenic genes increase as the proportion of BGS-7 increase. In the in vivo test, a higher bone-implant contact ratio, bone volume ratio, bone mineral density, and new bone area are observed when the scaffold and bone grafts were used together.

CONCLUSION

The 3D-printed scaffold, a mixture of BGS-7 and PCL, exhibit higher biological compatibility as the proportion of BGS-7 increase. Additionally, the use of scaffold is effective for vertical bone augmentation.

A Review on Advances and Challenges in Core-Shell Scaffolds for Bone Tissue Engineering: Design, Fabrication, and Clinical Translation

This review explores core-shell scaffolds in bone tissue engineering, highlighting their osteoconductive and osteoinductive properties critical for bone growth and regeneration. Key design factors include material selection, porosity, mechanical strength, biodegradation kinetics, and bioactivity. Electrospun core-shell nanofibrous scaffolds demonstrate potential in delivering therapeutic agents and enhancing bone regeneration. Critical characterization techniques include structural, surface, chemical composition, mechanical, and degradation analyses. Scaling up production poses challenges, addressed by innovative electrospinning techniques. Future research focuses on regulatory and commercial considerations, while exploring advanced materials and fabrication methods to optimize scaffold performance for improved clinical outcomes.

Synthesis and characterization of injectable thermosensitive hydrogel based on Pluronic-grafted silk fibroin copolymer containing hydroxyapatite nanoparticles as potential for bone tissue engineering

Injectable hydrogels are promising for bone tissue engineering due to their minimally invasive application and adaptability to irregular defects. This study presents the development of pluronic grafted silk fibroin (PF-127-g-SF), a temperature-sensitive graft copolymer synthesized from SF and modified PF-127 via a carbodiimide coupling reaction. The PF-127-g-SF copolymer exhibited a higher sol-gel transition temperature (34 °C at 16 % w/v) compared to PF-127 (23 °C), making it suitable for injectable applications. It also showed improved flexibility and strength, with a yielding point increase from <10 % to nearly 30 %. Unlike PF-127 gel, which degrades within 72 h in aqueous media, the PF-127-g-SF copolymer maintained a stable gel structure for over two weeks due to its robust crosslinked hydrogel network. Incorporating hydroxyapatite nanoparticles (n-HA) into the hydrogel reduced pore size and decreased swelling and degradation rates, extending structural stability to four weeks. Increasing n-HA concentration from 0 % to 20 % reduced porosity from 80 % to 66 %. Rheological studies indicated that n-HA enhanced the scaffold's strength and mechanical properties without altering gelation temperature. Cellular studies with MG-63 cells showed that n-HA concentration influenced cell viability and mineralization, highlighting the scaffold's potential in bone tissue engineering.

Injectable mineralized Sr-hydroxyapatite nanoparticles-loaded ɛ-polylysine-hyaluronic acid composite hydrogels for bone regeneration

In this study, multifunctional injectable mineralized antibacterial nanocomposite hydrogels were prepared by a homogenous distribution of high content of (up to 60 wt%) Sr-substituted hydroxyapatite (Sr-HAp) nanoparticles into covalently cross-linked ɛ-polylysine (ɛ-PL) and hyaluronic acid (HA) hydrogel network. The developed bone-targeted nanocomposite hydrogels were to synergistically combine the functional properties of bioactive Sr-HAp nanoparticles and antibacterial ɛ-PL-HA hydrogels for bone tissue regeneration. Viscoelasticity, injectability, structural parameters, degradation, antibacterial activity, and in vitro biocompatibility of the fabricated nanocomposite hydrogels were characterized. Physical performances of the ɛ-PL-HA hydrogels can be tailored by altering the mass ratio of Sr-HAp. The nanocomposite hydrogels revealed good stability against enzymatic degradation, which increased from 5 to 19 weeks with increasing the mass ratio of Sr-HAp from 40 % to 60 %. The loading of the Sr-HAp at relatively high mass ratios did not suppress the fast-acting and long-term antibacterial activity of the ɛ-PL-HA hydrogels against S. aureus and E. coli. The cell studies confirmed the cytocompatibility and pre-collagen I synthesis-promoting activity of the fabricated nanocomposite hydrogels.

Ternary nanocomposite potentiates the lysophosphatidic acid effect on human osteoblast (MG63) maturation

Aim: This study aimed to investigate the potential of ternary nanocomposite (TNC) to support MG63 osteoblast maturation to EB1089-(3S)1-fluoro-3-hydroxy-4-(oleoyloxy)butyl-1-phosphonate (FHBP) cotreatment. Materials & methods: Binary (P25/reduced graphene oxide [rGO]) nanocomposite was prepared, and silver (Ag) nanoparticles were loaded onto the surface to form TNC (P25/rGO/Ag). The influence of TNC on proliferation, alkaline phosphatase activity and osteogenic gene expression was evaluated in a model of osteoblast maturation wherein MG63 were costimulated with EB1089 and FHBP. Results: TNC had no cytotoxic effect on MG63. The addition of TNC to EB1089-FHBP cotreatment enhanced the maturation of MG63, as supported by the greater alkaline phosphatase activity and OPN and OCN gene expression. Conclusion: TNC could serve as a promising carrier for FHBP, opening up possibilities for its application in bone regeneration.

Fabrication and characterisation of bioglass and hydroxyapatite-filled scaffolds

Tissue engineering is a continuously evolving field. One of the main lines of research in this field focuses on the replacement of bone defects with materials designed to interact with the cells of a living organism in order to provide the body with a structure on which new tissues can easily grow. Among the most commonly used materials are bioglasses, which are frequently used due to their versatility and good properties. This article discusses the results of the production of an injectable paste of Bioglass® 45S5 and hydroxyapatite on a 3D printed porous structure by additive manufacturing, using a thermoplastic (PLA). The results were evaluated in a specific application of the paste, so the mechanical and bioactive properties were studied to show the multiple possibilities of using this combination for its application in regenerative medicine and more specifically in bone implants.

Surface Characteristics and Bone Biocompatibility of Cold-Sprayed Porous Titanium on Polydimethylsiloxane Substrates

A variant of the cold spray (CS) technique was applied for the functionalization of polymer-based materials such as polydimethylsiloxane (PDMS) to improve the extent of mammalian cell interactions with these substrates. This was demonstrated by the embedment of porous titanium (pTi) into PDMS substrates using a single-step CS technique. CS processing parameters such as gas pressure and temperature were optimized to achieve the mechanical interlocking of pTi in the compressed PDMS to fabricate a unique hierarchical morphology possessing micro-roughness. As evidenced by the preserved porous structure, the pTi particles did not undergo any significant plastic deformation upon impact with the polymer substrate. The thickness of the particle embedment layer was determined, by cross-sectional analysis, ranging from 120 μm to over 200 μm. The behavior of osteoblast-like cells MG63 coming into contact with the pTi-embedded PDMS was examined. The results showed that the pTi-embedded PDMS samples promoted 80-96% of cell adhesion and proliferation during the early stages of incubation. The low cytotoxicity of the pTi-embedded PDMS was confirmed, with cell viability of the MG63 cells being above 90%. Furthermore, the pTi-embedded PDMS facilitated the production of alkaline phosphatase and calcium deposition in the MG63 cells, as demonstrated by the higher amount of alkaline phosphatase (2.6 times) and calcium (10.6 times) on the pTi-embedded PDMS sample fabricated at 250 °C, 3 MPa. Overall, the work demonstrated that the CS process provided flexibility in the parameters used for the production of the modified PDMS substrates and is highly efficient for the fabrication of coated polymer products. The results obtained in this study suggest that a tailorable porous and rough architecture could be achieved that promoted osteoblast function, indicating that the method has promise in the design of titanium-polymer composite materials applied to biomaterials used in musculoskeletal applications.

Characterization of 3D printed biodegradable piezoelectric scaffolds for bone regeneration

OBJECTIVE

The primary objective of this research was to develop a poly(l-lactic acid) (PLLA) scaffold and evaluate critical characteristics essential for its biologic use as a craniofacial implant.

MATERIALS AND METHODS

PLLA scaffolds were designed and fabricated using fused deposition modeling technology. The surface morphology and microarchitecture were analyzed using scanning electron microscopy (SEM) and microCT, respectively. Crystallography, compressive modulus, and the piezoelectric potential generated upon mechanical distortion were characterized. Hydrolytic degradation was studied. MG63 osteoblast-like cell proliferation and morphology were assessed.

RESULTS

The porosity of the scaffolds was 73%, with an average pore size of 450 µm and an average scaffold fiber thickness of 130 µm. The average compressive modulus was 244 MPa, and the scaffolds generated an electric potential of 25 mV upon cyclic/repeated loading. The crystallinity reduced from 27.5% to 13.9% during the 3D printing process. The hydrolytic degradation was minimal during a 12-week period. Osteoblast-like cells did not attach to the uncoated scaffold but attached well after coating the scaffold with fibrinogen. They then proliferated to cover the complete scaffold by Day 14.

CONCLUSION

The PLLA scaffolds were designed and printed, proving the feasibility of 3D printing as a method of fabricating PLLA scaffolds. The elastic modulus was comparable to that of trabecular bone, and the piezoelectric properties of the PLLA were retained after 3D printing. The scaffolds were cytocompatible. These 3D-printed PLLA scaffolds showed promising properties akin to the natural bone, and they warrant further investigation for bone regeneration.

The Dual Effect of 3D-Printed Biological Scaffolds Composed of Diverse Biomaterials in the Treatment of Bone Tumors

Bone tumors, including primary bone tumors, invasive bone tumors, metastatic bone tumors, and others, are one of the most clinical difficulties in orthopedics. Once these tumors have grown and developed in the bone system, they will interact with osteocytes and other environmental cells in the bone system's microenvironment, leading to the eventual damage of the bone's physical structure. Surgical procedures for bone tumors may result in permanent defects. The dual-efficacy of tissue regeneration and tumor treatment has made biomaterial scaffolds frequently used in treating bone tumors. 3D printing technology, also known as additive manufacturing or rapid printing prototype, is the transformation of 3D computer models into physical models through deposition, curing, and material fusion of successive layers. Adjustable shape, porosity/pore size, and other mechanical properties are an advantage of 3D-printed objects, unlike natural and synthetic material with fixed qualities. Researchers have demonstrated the significant role of diverse 3D-printed biological scaffolds in the treatment for bone tumors and the regeneration of bone tissue, and that they enhanced various performance of the products. Based on the characteristics of bone tumors, this review synthesized the findings of current researchers on the application of various 3D-printed biological scaffolds including bioceramic scaffold, metal alloy scaffold and nano-scaffold, in bone tumors and discussed the advantages, disadvantages, and future application prospects of various types of 3D-printed biological scaffolds. Finally, the future development trend of 3D-printed biological scaffolds in bone tumor is summarized, providing a theoretical foundation and a larger outlook for the use of biological scaffolds in the treatment of patients with bone tumors.

Osseointegration Effect of Micro-Nano Implants Loaded With Kaempferol in Osteoporotic Rats

Objective: To investigate the effect of osseointegration of kaempferol loaded on the surface of micro-nanomorphic implants in ovariectomized rats.

Methods: Titanium flakes were polished to obtain the PT group, anodized and acid-etched to obtain the NT and WNT groups, loaded with kaempferol to obtain the KNT and KWNT groups, and spin-coated on chitosan-gelatin composite film to obtain the KNT-CG and KWNT-CG groups. In vitro experiments were performed to observe the physicochemical properties of the titanium tablets in each group through scanning electron microscopy and contact angle experiments. The cytotoxicity and drug release pattern were observed using CCK-8 and drug release assays. An osteoporosis rat model was established. Pure titanium implants were divided into PT, NT, WNT, KNT-CG, and KWNT-CG groups after the same treatment and used in the in vivo experiments and then implanted in the femur of mice in each group. After 4 weeks, all samples were collected for toluidine blue staining, micro-computed tomography scanning, and bone morphometry analysis to evaluate their osteogenic properties.

Results: According to scanning electron microscopy, the surface of the titanium flakes had a micro-nano morphology in the WNT group and the KNT and KWNT groups were functionally loaded with kaempferol. In CCK-8 and drug release experiments, the loaded kaempferol and gelatin composite membranes showed no significant toxic effects on cells. The drug release time in the KNT-CG and KWNT-CG groups was significantly longer than that in the KNT and KWNT groups, with the release time in the KWNT-CG group reaching 15 days. In vivo experiments micro-computed tomography and bone morphometry analysis showed that the osteoporosis model had been successfully constructed. The bone volume fraction around the implant increased. Toluidine blue staining showed new bone formation and a significantly increased number of bone trabeculae.

Conclusion: Kaempferol micro-nanocomposite coating improved the osseointegration ability of implants in osteoporotic rats.

Effect of micro/nanoscaled Ti phosphate/Ti oxide hybrid coating on the osseointegration of Ti implants

OBJECTIVES

This study was performed to fabricate a bionic coating with titanium (Ti) phosphate to promote the osseointegration of Ti substrate implants.

METHODS

Phosphorylated micro/nanocoating was prepared on the surface of pure titanium (i.e., TiP-Ti) by hydrothermal process under special pressure, and the untreated smooth pure titanium (cp-Ti) was selected as the control. To evaluate the characteristics of the coating surface, scanning electron microscopy, X-ray diffraction, atomic force microscopy, and contact-angle measurement were performed. In addition, the effects of TiP-Ti on the proliferation, adhesion, and differentiation of rat bone marrow mesenchymal stem cells (BMSCs) were investigated by using in vitro cytology. Finally, TiP-Ti implants were implanted into the rat tibia, and the effect of TiP-Ti on the osseointegration in the host was evaluated after 12 weeks.

RESULTS

The TiP-Ti surface presented a bionic structure with coexisting nanoscale 3D spatial structure and microscale pores. In vitro experiments showed that the BMSCs had enhanced adhesion, proliferation, and osteogenic differentiation on the TiP-Ti surface. Furthermore, in vivo, TiP-Ti showed considerably stronger osseointegration compared with pure titanium, and the ultimate shear strength and maximum pushing force were significantly improved.

CONCLUSIONS

A bionic structure with TiP-Ti micro/nanoscale coating was successfully fabricated, indicating a promising method for modifying the surface of implants.

Nanohydroxyapatite as a Biomaterial for Peripheral Nerve Regeneration after Mechanical Damage-In Vitro Study

Hydroxyapatite has been used in medicine for many years as a biomaterial or a cover for other biomaterials in orthopedics and dentistry. This study characterized the physicochemical properties (structure, particle size and morphology, surface properties) of Li⁺- and Li⁺/Eu³⁺-doped nanohydroxyapatite obtained using the wet chemistry method. The potential regenerative properties against neurite damage in cultures of neuron-like cells (SH-SY5Y and PC12 after differentiation) were also studied. The effect of nanohydroxyapatite (nHAp) on the induction of repair processes in cell cultures was assessed in tests of metabolic activity, the level of free oxygen radicals and nitric oxide, and the average length of neurites. The study showed that nanohydroxyapatite influences the increase in mitochondrial activity, which is correlated with the increase in the length of neurites. It has been shown that the doping of nanohydroxyapatite with Eu³⁺ ions enhances the antioxidant properties of the tested nanohydroxyapatite. These basic studies indicate its potential application in the treatment of neurite damage. These studies should be continued in primary neuronal cultures and then with in vivo models.

The Effect of a Polyester Nanofibrous Membrane with a Fibrin-Platelet Lysate Coating on Keratinocytes and Endothelial Cells in a Co-Culture System

Chronic wounds affect millions of patients worldwide, and it is estimated that this number will increase steadily in the future due to population ageing. The research of new therapeutic approaches to wound healing includes the development of nanofibrous meshes and the use of platelet lysate (PL) to stimulate skin regeneration. This study considers a combination of a degradable electrospun nanofibrous blend of poly(L-lactide-co-ε-caprolactone) and poly(ε-caprolactone) (PLCL/PCL) membranes (NF) and fibrin loaded with various concentrations of PL aimed at the development of bioactive skin wound healing dressings. The cytocompatibility of the NF membranes, as well as the effect of PL, was evaluated in both monocultures and co-cultures of human keratinocytes and human endothelial cells. We determined that the keratinocytes were able to adhere on all the membranes, and their increased proliferation and differentiation was observed on the membranes that contained fibrin with at least 50% of PL (Fbg + PL) after 14 days. With respect to the co-culture experiments, the membranes with fibrin with 20% of PL were observed to enhance the metabolic activity of endothelial cells and their migration, and the proliferation and differentiation of keratinocytes. The results suggest that the newly developed NF combined with fibrin and PL, described in the study, provides a promising dressing for chronic wound healing purposes.

Effect of Multi-Phosphonate Coating of Titanium Surfaces on Osteogenic Potential

The aim of this study was to evaluate the impact of a novel multi-phosphonate (MP) coating strategy of dental implant surfaces on the expression of osteogenesis-related factors in vitro. MG-63 human osteoblast-like cells, bone marrow mesenchymal stem cells (BM-MSCs), and human periodontal ligament stem cells (hPDLSCs) were cultured separately on titanium disks with and without MP coating. Cell attachment was visualized by focal adhesion and actin cytoskeleton staining. The proliferation and gene expression of the markers related to osteogenesis and bone turnover were measured after 48 and 120 h of cell culture. Actin cytoskeleton assembly and focal adhesion were similar between test surfaces within each cell type but differed from those on tissue culture plastic (TCP). The proliferation of MG-63 cells and PDLSCs was comparable on all surfaces, while BM-MSCs showed an increase on tissue culture plastic (TCP) versus titanium. The gene expression of osteoprotegerin and receptor activator of nuclear factor-kappa B ligand was higher in MG-63 cells grown on MP-coated surfaces. At the same time, osteocalcin was decreased compared to the other surfaces. Collagen type I gene expression after 120 h was significantly lower in hPDLSCs cultivated on MP-coated surfaces. Within the limitations of this study, MP coating on titanium surfaces might have a slight beneficial effect on bone turnover in vitro.

Fabrication of Mechanically Reinforced Gelatin/Hydroxyapatite Bio-Composite Scaffolds by Core/Shell Nozzle Printing for Bone Tissue Engineering

In tissue engineering, biocompatible scaffolds are used as 3D cell niches to provide a similar environment to that of native tissue for seeded cells to regenerate the target tissue. When engineering bone tissue, high mechanical strength and calcium phosphate composition are essential factors to consider. In this study, we fabricated biocompatible composite scaffolds composed of synthetic polymers (polycaprolactone (PCL) and poly (vinyl alcohol) (PVA)), natural polymers (gelatin and collagen) and bioceramic (hydroxyapatite; HA) for bone tissue engineering. The synthetic polymers were used to enhance the mechanical properties of the composite scaffolds while the natural protein-based polymers were used to enhance various cellular activities, such as cell adhesion and proliferation. Meanwhile, the bioceramic was introduced to promote osteogenic differentiation. Composite scaffolds were evaluated for their physical characteristics, such as mechanical, swelling and protein absorbing properties as well as biological properties (cell proliferation, alkaline phosphatase (ALP) activities and calcium deposition) with human osteoblast-like cells (MG63). Consequently, incorporation of hydroxyapatite into the gelatin/PVA (C-GPH) scaffold showed 5-fold and 1.5-fold increase in calcium deposition and ALP activities, respectively compared to gelatin/PVA scaffold (C-GP). Moreover, compressive modulus also increased 1.8-fold. Integration of PCL core into gelatin/PVA/hydroxyapatite scaffold (C-PGPH) further amplified the compressive modulus 1.5-fold. In conclusion, the scaffold that is reinforced with HA particles and integrated with PCL core of the struts showed significant potential in field of bone tissue engineering.

Polydopamine-Assisted Anchor of Chitosan onto Porous Composite Scaffolds for Accelerating Bone Regeneration

Surface function has an importance for the bioactivity of porous polymeric scaffolds. The goal of the present study is to immobilize highly bioactive chitosan (CS) onto the surface of porous composite scaffolds to accelerate bone regeneration. Porous poly(ε-caprolactone) (PCL)/bioactive glass (BG) composite scaffolds with strong anchor of CS were fabricated via mussel-inspired polydopamine (PDA) coating as a bridging layer. In vitro cell culture showed that firm immobilization of CS onto the composite scaffolds significantly enhanced protein adsorption, cell adhesion, and osteogenic differentiation compared to CS-decorated scaffolds via physical adsorption. In vivo assessments demonstrated that covalent immobilization of CS onto the surface of scaffolds obviously promoted cranial bone regeneration in comparison with the counterparts with physical adsorption of CS. The proposed method offers a feasible and effective means to fabricate artificial bioactive scaffolds for bone tissue engineering application.

Nanocrystalline Hydroxyapatite Loaded with Resveratrol in Colloidal Suspension Improves Viability, Metabolic Activity and Mitochondrial Potential in Human Adipose-Derived Mesenchymal Stromal Stem Cells (hASCs)

In response to the demand for new multifunctional materials characterized by high biocompatibility, hydrogel (HG) nanocomposites as a platform for bioactive compound delivery have been developed and fabricated. A specific crosslinking/copolymerization chemistry was used to construct hydrogels with a controlled network organization. The hydrogels were prepared using 3,6-anhydro-α-l-galacto-β-d-galactan (galactose hydrogel) together with resveratrol (trans-3,5,4'-trihydroxystilbene) and calcium hydroxyapatite nanoparticles. The resveratrol was introduced in three different concentrations of 0.1, 0.5, and 1 mM. Nanosized calcium hydroxyapatite was synthesized by a microwave-assisted hydrothermal technique, annealed at 500 °C for 3 h, and introduced at a concentration 10% (m/v). The morphology and structural properties of Ca10(PO₄)₆(OH)₂ and its composite were determined by using XRPD (X-ray powder diffraction) techniques, as well as the absorption and IR (infrared) spectroscopy. The average nanoparticle size was 35 nm. The water affinity, morphology, organic compound release profile, and cytocompatibility of the obtained materials were studied in detail. The designed hydrogels were shown to be materials of biological relevance and of great pharmacological potential as carriers for bioactive compound delivery. Their cytocompatibility was tested using a model of human multipotent stromal cells isolated from adipose tissue (hASCs). The biomaterials increased the proliferative activity and viability of hASCs, as well as reduced markers of oxidative stress. In light of the obtained results, it has been thought that the designed materials meet the requirements of the tissue engineering triad, and may find application in regenerative medicine, especially for personalized therapies.

Promoting Osseointegration of Ti Implants through Micro/Nanoscaled Hierarchical Ti Phosphate/Ti Oxide Hybrid Coating

In this study, micro/nanoscaled hierarchical hybrid coatings containing titanium (Ti) phosphate and Ti oxide have been fabricated with the aim of promoting osseointegration of Ti-based implants. Three representative surface coatings, namely, micro/nanograss Ti (P-G-Ti), micro/nanoclump Ti, (P-C-Ti), and micro/nanorod Ti (P-R-Ti), have been produced. In-depth investigations into the coating surface morphology, topography, chemical composition, and the surface/cell interaction have been carried out using scanning electron microscopy, transmission electron microscope, X-ray photoelectron spectroscopy, X-ray diffraction, contact-angle measurement, and protein adsorption assay. In addition, in vitro performance of the coating (cell proliferation, adhesion, and differentiation) has been evaluated using rat bone marrow stromal cells (BMSCs), and in vivo assessments have been carried out based on a rat tibia implantation model. All the hybrid coating modified implants demonstrated enhanced protein adsorption and BMSC viability, adhesion and differentiation, with P-G-Ti showing the best bioactivity among all samples. Subsequent i n vivo osseointegration tests confirmed that P-G-Ti has induced a much stronger interfacial bonding with the host tissue, indicated by the 2-fold increase in the ultimate shear strength and over 6-fold increase in the maximum push-out force compared to unmodified Ti implants. The state-of-the-art coating technology proposed for Ti-based implants in this study holds great potential in advancing medical devices for next-generation healthcare technology.

Novel cellulose/hydroxyapatite scaffolds for bone tissue regeneration: In vitro and in vivo study

Cellulose scaffolds containing nano- or micro-hydroxyapatite (nHA or μHA) were prepared by the regeneration of cellulose from its acetylated derivative and the mechanical immobilization of inorganic particles, followed by freeze-drying. Microtomographic (micro-computed tomography) evaluation revealed that both scaffolds presented a highly interconnected porous structure, with a mean pore diameter of 490 ± 94 and 540 ± 132 μm for cellulose/nHA and cellulose/μHA, respectively. In vitro and in vivo characterizations of the developed scaffolds were investigated. Commercially available bone allograft was used as a control material. For the in vitro characterization, osteoblastic cell cultures were used and characterized over time to evaluate cell adhesion, metabolic activity, and functional output (alkaline phosphatase activity and osteoblastic gene expression). The results revealed greater spreading cell distribution alongside an increased number of filopodia, higher MTT values, and significantly increased expression of osteoblastic genes (Runx-2, alkaline phosphatase, and BMP-2) for cellulose/nHA, compared with cellulose/μHA and the control. The in vivo biocompatibility was evaluated in a rabbit calvarial defect model. The investigated scaffolds were implanted in circular rabbit calvaria defects. Four- and 12-week bone biopsies were investigated using micro-computed tomography and histological analysis. Although both cellulose/HA scaffolds outperformed the assayed control, a significantly higher amount of newly formed mineralized tissue was found within the defects loaded with cellulose/nHA. Within the limitations of this study, the developed cellulose/HA scaffolds showed promising results for bone regeneration applications. The biological response to the scaffold seems to be greatly dependent on the HA particles' characteristics, with cellulose scaffolds loaded with nHA eliciting an enhanced bone response.

New bioactive glass scaffolds with exceptional qualities for bone tissue regeneration: response of osteoblasts and osteoclasts

Tissue regeneration is a significantly improved alternative to tissue replacement by implants. It requires porous bioscaffolds for the restoration of natural tissue rather than relying on bio-inactive, often metallic implants. Recently, we developed technology for fabricating novel, nano-macroporous bioactive 'tailored amorphous multi-porous (TAMP)' hard tissue scaffolds using a 70 mol% SiO₂-30 mol% CaO model composition. The TAMP silicate scaffolds, fabricated by a modified sol-gel process, have shown excellent biocompatibility via the rapid formation of hydroxyapatite in biological fluids as well as in early tests with bone forming cells. Here we report an in depth investigation of the response of MC3T3-E1 pre-osteoblast cells and bone marrow derived (BMD) osteoclasts to these TAMP scaffolds. Light and electron microscopic imaging, gene and protein expression, and enzyme activity analyses demonstrate that MC3T3-E1 pre-osteoblasts adhere, proliferate, colonize, and differentiate on and inside the bioactive TAMP scaffolds. Additionally, BMD precursor cells mature into active osteoclasts and remodel the scaffold, highlighting the exceptional qualities of this novel scaffold material for bone tissue regeneration.

Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer

BACKGROUND

The primary objective of Tissue engineering is a regeneration or replacement of tissues or organs damaged by disease, injury, or congenital anomalies. At present, Tissue engineering repairs damaged tissues and organs with artificial supporting structures called scaffolds. These are used for attachment and subsequent growth of appropriate cells. During the cell growth gradual biodegradation of the scaffold occurs and the final product is a new tissue with the desired shape and properties. In recent years, research workplaces are focused on developing scaffold by bio-fabrication techniques to achieve fast, precise and cheap automatic manufacturing of these structures. Most promising techniques seem to be Rapid prototyping due to its high level of precision and controlling. However, this technique is still to solve various issues before it is easily used for scaffold fabrication. In this article we tested printing of clinically applicable scaffolds with use of commercially available devices and materials. Research presented in this article is in general focused on "scaffolding" on a field of bone tissue replacement.

RESULTS

Commercially available 3D printer and Polylactic acid were used to create originally designed and possibly suitable scaffold structures for bone tissue engineering. We tested printing of scaffolds with different geometrical structures. Based on the osteosarcoma cells proliferation experiment and mechanical testing of designed scaffold samples, it will be stated that it is likely not necessary to keep the recommended porosity of the scaffold for bone tissue replacement at about 90%, and it will also be clarified why this fact eliminates mechanical properties issue. Moreover, it is demonstrated that the size of an individual pore could be double the size of the recommended range between 0.2-0.35 mm without affecting the cell proliferation.

CONCLUSION

Rapid prototyping technique based on Fused deposition modelling was used for the fabrication of designed scaffold structures. All the experiments were performed in order to show how to possibly solve certain limitations and issues that are currently reported by research workplaces on the field of scaffold bio-fabrication. These results should provide new valuable knowledge for further research.

Cytotoxicity Evaluation of High-Temperature Annealed Nanohydroxyapatite in Contact with Fibroblast Cells

Biomaterials are substances manufactured for medical purposes in direct contact with the tissues of organisms. Prior to their use, they are tested to determine their usefulness and safety of application. Hydroxyapatites are used in medicine as a bony complement because of their similarity to the natural apatite therein. Thanks to their bioactivity, biocompatibility, stability and non-toxicity hydroxyapatite are the most commonly used materials in osteoimplantology. The use of materials at the nanoscale in medicine or biology may carry the risk of undesirable effects. The aim of the study was to evaluate the cytotoxic effect of high-temperature annealed nanohydroxyapatites on the L929 murine fibroblasts. Nanohydroxyapatites in powder form were obtained by the wet chemistry method: in the temperature range of 800–1000 °C and used for the study. Based on performed studies evaluating the morphology and fibroblast viability, it was found that nanohydroxyapatites show no cytotoxic effects on the L929 cell line.

Alendronate-loaded hydroxyapatite-TiO2 nanotubes for improved bone formation in osteoporotic rabbits

Alendronate-loaded hydroxyapatite-TiO₂ nanotubes were fabricated for locally improving new bone formation at the bone–implant interface in osteoporotic rabbits.