Pulp and dentin tissue engineering and regeneration: current progress

Effect of low-level laser on proliferation, angiogenic and dentinogenic differentiation of human dental pulp stem cells

BACKGROUND

The aim was to evaluate the effect of single and double doses of low-level laser irradiation on proliferation of human dental pulp stem cells (DPSC) and expression of vascular endothelial growth factor (VEGF) and dentine sialoprotein (DSP).

METHODS

In this experimental in vitro study, after confirming the stemness of DPSCs, the cells were cultured in Dulbecco's Modified Eagle Medium (DMEM) for MTT assay and VEGF-ELISA and osteogenic medium for DSP-ELISA. The wells containing DPSCs were divided into three main groups and 9 subgroups (n = 7). In groups with single low-level laser, 660-nm diode laser was irradiated at 100 mW and 3 J/cm2 energy density for 15 s. In groups with double doses of low-level laser the second identical irradiation was after 48 h. The MTT-assay and ELISA for DSP/VEGF (dentinogenic/angiogenic differentiation) were performed at 1, 7 and 14 days post irradiation. Using the SPSS software 20 (SPSS, Chicago, Ill, USA) with 95% confidence interval (P = 0.05), a two-way ANOVA test with Tukey's post hoc test was used for the effect of LLLI on VEGF and DSP. The One-Way ANOVA was used for of cell proliferation.

RESULTS

Higher proliferation rate in both single and double low-level laser was reported. The difference was statistically significant for double doses of low-level laser (P = 0.001, P = 0.020 and P = 0.000 for 1, 7 and 14 days, respectively). Also after one, 7 and 14 days, cells in significant increase in DSP (P > 0.05) and VEGF (P > 0.05) was observed that was significantly higher for double doses of low-level laser.

CONCLUSIONS

Low level laser enhanced the mitochondrial activity and proliferation of DPSCs. Increased production of DSP/VEGF indicates dentinogenic/angiogenic activity.

CLINICAL RELEVANCE

Low level laser increases the proliferation of DPSCs, elevates the production of VEGF (which means better angiogenesis in regenerative treatments) and increases the production of DSP (which means better dentinogenesis in vital pulp treatments).

Advances in Injectable Polymeric Biomaterials and Their Contemporary Medical Practices

Injectable biomaterials have been engineered to operate within the human body, offering versatile solutions for minimally invasive therapies and meeting several stringent requirements such as biocompatibility, biodegradability, low viscosity for ease of injection, mechanical strength, rapid gelation postinjection, controlled release of therapeutic agents, hydrophobicity/hydrophilicity balance, stability under physiological conditions, and the ability to be sterilized. Their adaptability and performance in diverse clinical settings make them invaluable for modern medical treatments. This article reviews recent advancements in the design, synthesis, and characterization of injectable polymeric biomaterials, providing insights into their emerging applications. We discuss a broad spectrum of these materials, including natural, synthetic, hybrid, and composite types, that are being applied in targeted drug delivery, cell and protein transport, regenerative medicine, tissue adhesives, injectable implants, bioimaging, diagnostics, and 3D bioprinting. Ultimately, the review highlights the critical role of injectable polymeric biomaterials in shaping the future of medical treatments and improving patient outcomes across a wide range of therapeutic and diagnostic applications.

Engineering of Bioresorbable Polymers for Tissue Engineering and Drug Delivery Applications

Herein, the recent advances in the development of resorbable polymeric-based biomaterials, their geometrical forms, resorption mechanisms, and their capabilities in various biomedical applications are critically reviewed. A comprehensive discussion of the engineering approaches for the fabrication of polymeric resorbable scaffolds for tissue engineering, drug delivery, surgical, cardiological, aesthetical, dental and cardiovascular applications, are also explained. Furthermore, to understand the internal structures of resorbable scaffolds, representative studies of their evaluation by medical imaging techniques, e.g., cardiac computer tomography, are succinctly highlighted. This approach provides crucial clinical insights which help to improve the materials' suitable and viable characteristics for them to meet the highly restrictive medical requirements. Finally, the aspects of the legal regulations and the associated challenges in translating research into desirable clinical and marketable materials of polymeric-based formulations, are presented.

Dentin Grafts: Navigating the Paradigm Shift in Regenerative Dentistry

The biomaterial of dentin has emerged as a promising candidate for the tissue engineering of dental hard tissues. In bone tissue engineering, it may serve as either a scaffold or a reservoir of growth factors. The physical and chemical similarities between the dentin structure and bone have sparked scientific interest in using its features for the development of a new bone transplant material. Dentin, unlike hard and fragile enamel, is viscoelastic, making it a very effective bone replacement. The regeneration of pulp tissue has proven challenging due to its encasement in dentin, which lacks collateral blood flow except from the apical end of the root. Yet, the emergence of contemporary tissue engineering and the identification of dental stem cells have enabled experimentation with the regeneration of both pulp and dentin. This review will explain the different types of dentin grafts, their biocompatibility, safety, and effectiveness, along with difficulties. Additionally, the paper covers several strategies for creating autogenous dentin grafts and gives evidence-based insights into their clinical effectiveness. Overall, dentin grafts appear as a potential alternative to standard graft materials, stimulating tissue regeneration and enhancing patient outcomes in regenerative dentistry operations.

Comparison of aquaporin profile of advanced passage mesenchymal stem cells with early passage mesenchymal stem cells and determination of its effect on adipogenic differentiation efficiency

OBJECTIVE

Our study aimed to compare aquaporin profiles in advanced and early passage bone marrow-derived mesenchymal stem cells (BM-MSCs) and assess the impact of aquaporin changes after adipogenic differentiation. Aquaporins are crucial for stem cell survival and differentiation during their life cycle. We focused on the role of aquaporins in the cell structures of advanced and early passage stem cells.

METHODS

In our study, BM-MSCs were used for our objectives. Characterization of the cells was evaluated via flow cytometry using stem cell surface markers. The characterized BM-MSCs were divided into control and differentiation groups at passages 3 (P3) and 8 (P8). AQP1, AQP3, AQP7, AQP9, and AQP10 expression levels on days 0, 1, 3, 7, 14, and 21 were evaluated using Real Time-PCR, ELISA, and immunofluorescence studies.

RESULTS

The cells were characterized by flow cytometry and confirmed to exhibit BM-MSC characteristics. At P3 and P8, differentiation was initiated, and AQP protein expression was observed to initially increase and then decrease on subsequent days. The increase in AQP protein expression at P3 occurred earlier than that at P8. Gene expression analysis demonstrated a statistically significant increase in AQP gene expression on days when AQP protein expression decreased. Moreover, statistical differences were observed between late and early passage AQP profiles.

CONCLUSION

Our study examined the composition of AQPs in BM-MSCs in association with cell passage, and found that AQPs play a role in the differentiation process. The connection between the AQP profile and aging might be related to differentiation capacity, which could have implications for slowing down cellular aging and developing new therapeutic approaches.

Wound-healing Processes After Pulpotomy in the Pulp Tissue of Type 1 Diabetes Mellitus Model Rats

INTRODUCTION

Patients with type 1 diabetes mellitus (DM1) tend to have delayed wound healing, even in the pulp tissue. We hypothesized that hyperglycemia affects odontoblast-like cell (OLC) differentiation and is involved in macrophage polarization. Accordingly, we evaluated dental pulp stem cell differentiation and macrophage phenotypes after pulpotomy.

METHODS

After modifying DM1 rat models by streptozotocin, 8-week-old rats' upper left first molars were pulpotomized with mineral trioxide aggregate. Meanwhile, the control group was administered saline. Immunohistochemical localization of nestin, osteopontin, α-smooth muscles (α-SMAs), and CD68 (pan-macrophage marker) was conducted 7 days after pulpotomy. The OLC differentiation stage was determined using double immunofluorescence of nestin and α-SMA. Double immunofluorescence of CD68 and iNOS was counted as M1 macrophages and CD68 and CD206 as M2 macrophages. Proliferating cell nuclear antigen and Thy-1 (CD90) were evaluated by immunofluorescence.

RESULTS

In DM1 rats, the reparative dentin bridge was not complete; however, the osteopontin-positive area did not differ significantly from that in controls. Proliferating cell nuclear antigen, indicative of cell proliferation, increased in positive cells in DM1 rats compared with controls. Double-positive cells for α-SMA and nestin indicated many immature OLCs in DM1. CD90 was positive only in controls. CD68-positive cells, especially M1 macrophages, were increased in DM1 rats, allowing the inflammatory stage to continue 7 days after pulpotomy.

CONCLUSIONS

The condition of DM1 model rats can interfere at various stages of the wound healing process, altering OLC differentiation and macrophage polarization. These findings highlight the importance of normal blood glucose concentrations during pulp wound healing.

Exosomes derived from odontogenic stem cells: Its role in the dentin-pulp complex

Odontogenic stem cells originate from cranial neural crest cells and offer unique advantages in the regeneration of dentin-pulp complex. There is increasing evidence that stem cells exert their biological functions mainly through exosome-based paracrine effects. Exosomes contain DNA, RNA, proteins, metabolites, etc., which can play a role in intercellular communication and have similar therapeutic potential to stem cells. In addition, compared with stem cells, exosomes also have the advantages of good biocompatibility, high drug carrying capacity, easy to obtain, and few side effects. Odontogenic stem cell-derived exosomes mainly affect the regeneration of the dentin-pulp complex by regulating processes such as dentintogenesis, angiogenesis, neuroprotection and immunomodulation. This review aimed to describe "cell-free therapies" based on odontogenic stem cell-derived exosomes, which aim to regenerate the dentin-pulp complex.

Chemical analysis of mineral trioxide agregate mixed with hyaluronic acids as an accelerant

MATERIALS AND METHOD

Mineral trioxide aggregate (MTA) has many clinical applications in dentistry; the main drawback is the long setting. The main objective is to investigate and compare the chemical effect of using two commercially available hyaluronic acid hydrogels (HA) instead of distilled water for mixing MTA as an accelerant of setting time. Test materials were divided into three groups; Group 1: (control) mixing MTA with distilled water supplied by the manufacturer; Group 2: mixing MTA with a hybrid cooperative complex of high and low molecular weight HA (Profhilo®); Group 3: mixing MTA with High molecular weight / non-cross-linked HA (Jalupro®). Mixing time, and setting time (initial and final) were determined, Fourier-transform infrared spectroscopy, Energy-dispersive X-ray spectroscopy, Field emission Scanning Electron Microscopy, and X-ray diffraction were performed.

RESULTS

mixing time, initial, and final setting time for (MTA + HA) groups were significantly different and lower in comparison to the control group (p < 0.05). This study revealed higher expression of calcium silicate hydrate and calcium hydroxide expression with higher Ca release in the MTA + HA group than the control group.

CONCLUSION

commercially available HA demonstrated better chemical properties when used as a mixing medium for MTA. The Mixing and setting time for MTA + HA group were significantly shorter than those of the control group were. Thus, commercially available HA can be used as a mixing medium for MTA.

Dental Pulp Stem Cells and Current in vivo Approaches to Study Dental Pulp Stem Cells in Pulp Injury and Regeneration

Dental pulp stem cells (DPSCs) have garnered significant interest in dental research for their unique characteristics and potential in tooth development and regeneration. While there were many studies to define their stem cell-like characteristics and osteogenic differentiation functions that are considered ideal candidates for regenerating damaged dental pulp tissue, how endogenous DPSCs respond to dental pulp injury and supply new dentin-forming cells has not been extensively investigated in vivo. Here, we review the recent progress in identity, function, and regulation of endogenous DPSCs and their clinical potential for pulp injury and regeneration. In addition, we discuss current advances in new mouse models, imaging techniques, and its practical uses and limitations in the analysis of DPSCs in pulp injury and regeneration in vivo.

New Challenges and Prospective Applications of Three-Dimensional Bioactive Polymeric Hydrogels in Oral and Craniofacial Tissue Engineering: A Narrative Review

Regenerative medicine, and dentistry offers enormous potential for enhancing treatment results and has been fueled by bioengineering breakthroughs over the previous few decades. Bioengineered tissues and constructing functional structures capable of healing, maintaining, and regenerating damaged tissues and organs have had a broad influence on medicine and dentistry. Approaches for combining bioinspired materials, cells, and therapeutic chemicals are critical in stimulating tissue regeneration or as medicinal systems. Because of its capacity to maintain an unique 3D form, offer physical stability for the cells in produced tissues, and replicate the native tissues, hydrogels have been utilized as one of the most frequent tissue engineering scaffolds during the last twenty years. Hydrogels' high water content can provide an excellent conditions for cell viability as well as an architecture that mimics real tissues, bone, and cartilage. Hydrogels have been used to enable cell immobilization and growth factor application. This paper summarizes the features, structure, synthesis and production methods, uses, new challenges, and future prospects of bioactive polymeric hydrogels in dental and osseous tissue engineering of clinical, exploring, systematical and scientific applications.

Biomechanical Modulation of Dental Pulp Stem Cell (DPSC) Properties for Soft Tissue Engineering

Dental pulp regeneration strategies frequently result in hard tissue formation and pulp obliteration. The aim of this study was to investigate whether dental pulp stem cells (DPSCs) can be directed toward soft tissue differentiation by extracellular elasticity. STRO-1-positive human dental pulp cells were magnetically enriched and cultured on substrates with elasticities of 1.5, 15, and 28 kPa. The morphology of DPSCs was assessed visually. Proteins relevant in mechanobiology ACTB, ITGB1, FAK, p-FAK, TALIN, VINCULIN, PAXILLIN, ERK 1/2, and p-ERK 1/2 were detected by immunofluorescence imaging. Transcription of the pulp marker genes BMP2, BMP4, MMP2, MMP3, MMP13, FN1, and IGF2 as well as the cytokines ANGPT1, VEGF, CCL2, TGFB1, IL2, ANG, and CSF1 was determined using qPCR. A low stiffness, i.e., 1.5 kPa, resulted in a soft tissue-like phenotype and gene expression, whereas DPSCs on 28 kPa substrates exhibited a differentiation signature resembling hard tissues with a low cytokine expression. Conversely, the highest cytokine expression was observed in cells cultured on intermediate elasticity, i.e., 15 kPa, substrates possibly allowing the cells to act as “trophic mediators”. Our observations highlight the impact of biophysical cues for DPSC fate and enable the design of scaffold materials for clinical pulp regeneration that prevent hard tissue formation.

Biomimetic Approaches in Clinical Endodontics

In the last few decades, biomimetic concepts have been widely adopted in various biomedical fields, including clinical dentistry. Endodontics is an important sub-branch of dentistry which deals with the different conditions of pulp to prevent tooth loss. Traditionally, common procedures, namely pulp capping, root canal treatment, apexification, and apexigonesis, have been considered for the treatment of different pulp conditions using selected materials. However, clinically to regenerate dental pulp, tissue engineering has been advocated as a feasible approach. Currently, new trends are emerging in terms of regenerative endodontics which have led to the replacement of diseased and non-vital teeth into the functional and healthy dentine-pulp complex. Root- canal therapy is the standard management option when dental pulp is damaged irreversibly. This treatment modality involves soft-tissue removal and then filling that gap through the obturation technique with a synthetic material. The formation of tubular dentine and pulp-like tissue formation occurs when stem cells are transplanted into the root canal with an appropriate scaffold material. To sum up tissue engineering approach includes three components: (1) scaffold, (2) differentiation, growth, and factors, and (3) the recruitment of stem cells within the pulp or from the periapical region. The aim of this paper is to thoroughly review and discuss various pulp-regenerative approaches and materials used in regenerative endodontics which may highlight the current trends and future research prospects in this particular area.

Investigating the residual effect of silver nanoparticles gel as an intra-canal medicament on dental pulp stromal cells

BACKGROUND

The aim of this study was to evaluate the indirect effects of residual silver nanoparticles (AgNPs) gel on human dental pulp stromal cells (DPSCs).

METHODS

Ninety-five dentin discs (4x4x1 mm) were prepared from freshly extracted human single-rooted teeth following institutional ethical approval and informed consent. Samples were cleaned, autoclaved, and treated with: 1.5%NaOCl, Saline and 17% EDTA then randomly assigned to 5 groups that received 50 μl of one of the following treatments: 0.01%AgNPs, 0.015%AgNPs, 0.02%AgNPs, Calcium hydroxide (Ca (OH)₂) or no treatment for 1 week. Discs were washed with Saline and 17%EDTA then seeded with DPSCs and incubated for 3 and 7 days. At 24 hours unattached cells were collected and counted. At each time point cytotoxicity (LDH assay), cell viability (live/dead staining and confocal microscopy) and cell proliferation (WST1 assay) were assessed. All experiments were repeated a minimum of 3 times using DPSCs isolated from 3 different donors for each time point assessed (n = 9/group). Statistical analysis was done using One-Way ANOVA followed by Tukey's test and Kruskal Wallis followed by post-hoc comparisons with significance set at p ≤ 0.05.

RESULTS

After 24 hours, the percentage of DPSCs attachment ranged between 92.66% ±4.54 and 95.08% ±1.44 with no significant difference between groups (P = 0.126). Cell viability was ≥92% at 24 hours for all groups. However this percentage dropped to less than 60% at 3 days then started to rise again at 7 days. There was no significant difference in cytotoxicity between different groups at all time points except for 0.01%AgNPs group which had the highest cytotoxicity. DPSCs proliferation increased significantly from 3 to 7 days in all groups except for Ca (OH)₂ which showed lower proliferation rates at both 3 (45.89%) and 7 days (79.25%).

CONCLUSION

Dentin discs treated for 7 days with concentrations of AgNPs gel (0.01-0.02%) allowed more than 90% DPSCs cell attachment after 24 hours. The cytotoxicity and proliferation of DPSCs in response to AgNPs gel were comparable to those with calcium hydroxide. This suggests that AgNPs gel may represent a promising future candidate for clinical use in regenerative endodontics. However, its effects may be concentration-dependent warranting further investigation.

Synthetic materials in craniofacial regenerative medicine: A comprehensive overview

The state-of-the-art approach to regenerating different tissues and organs is tissue engineering which includes the three parts of stem cells (SCs), scaffolds, and growth factors. Cellular behaviors such as propagation, differentiation, and assembling the extracellular matrix (ECM) are influenced by the cell's microenvironment. Imitating the cell's natural environment, such as scaffolds, is vital to create appropriate tissue. Craniofacial tissue engineering refers to regenerating tissues found in the brain and the face parts such as bone, muscle, and artery. More biocompatible and biodegradable scaffolds are more commensurate with tissue remodeling and more appropriate for cell culture, signaling, and adhesion. Synthetic materials play significant roles and have become more prevalent in medical applications. They have also been used in different forms for producing a microenvironment as ECM for cells. Synthetic scaffolds may be comprised of polymers, bioceramics, or hybrids of natural/synthetic materials. Synthetic scaffolds have produced ECM-like materials that can properly mimic and regulate the tissue microenvironment's physical, mechanical, chemical, and biological properties, manage adherence of biomolecules and adjust the material's degradability. The present review article is focused on synthetic materials used in craniofacial tissue engineering in recent decades.

The Four Pillars for Successful Regenerative Therapy in Endodontics: Stem Cells, Biomaterials, Growth Factors, and Their Synergistic Interactions

Endodontics has made significant progress in regenerative approaches in recent years, thanks to advances in biologically based procedures or regenerative endodontic therapy (RET). In recent years, our profession has witnessed a clear conceptual shift in this therapy. RET was initially based on a blood clot induced by apical bleeding without harvesting the patient’s cells or cell-free RET. Later, the RET encompassed the three principles of tissue engineering, stromal/stem cells, scaffolds, and growth factors, aiming for the regeneration of a functional dentin pulp complex. The regenerated dental pulp will recover the protective mechanisms including innate immunity, tertiary dentin formation, and pain sensitivity. This comprehensive review covers the basic knowledge and practical information for translational applications of stem cell-based RET and tissue engineering procedures for the regeneration of dental pulp. It will also provide overall information on the emerging technologies in biological and synthetic matrices, biomaterials, and signaling molecules, recent advances in stem cell therapy, and updated experimental results. This review brings useful and timely clinical evidence for practitioners to understand the challenges faced for a successful cell-based RET and the importance of preserving or reestablishing tooth vitality. The clinical translation of these current bioengineering approaches will undoubtedly be beneficial to the future practice of endodontics.

Tissue Characteristics in Endodontic Regeneration: A Systematic Review

The regenerative endodontic procedure (REP) represents a treatment option for immature necrotic teeth with a periapical lesion. Currently, this therapy has a wide field of pre-clinical and clinical applications, but no standardization exists regarding successful criteria. Thus, by analysis of animal and human studies, the aim of this systematic review was to highlight the main characteristics of the tissue generated by REP. A customized search of PubMed, EMBASE, Scopus, and Web of Science databases from January 2000 to January 2022 was conducted. Seventy-five human and forty-nine animal studies were selected. In humans, the evaluation criteria were clinical 2D and 3D radiographic examinations. Most of the studies identified a successful REP with an asymptomatic tooth, apical lesion healing, and increased root thickness and length. In animals, histological and radiological criteria were considered. Newly formed tissues in the canals were fibrous, cementum, or bone-like tissues along the dentine walls depending on the area of the root. REP assured tooth development and viability. However, further studies are needed to identify procedures to successfully reproduce the physiological structure and function of the dentin–pulp complex.

Advances in Scaffolds Used for Pulp-Dentine Complex Tissue Engineering - A Narrative Review

Pulp necrosis in immature teeth disrupts root development and predisposes roots to fracture as a consequence of their thin walls and open apices. Regenerative endodontics is a developing treatment modality whereby necrotic pulps are replaced with newly formed healthy tissue inside the root canal. Many clinical studies have demonstrated the potential of this strategy to stimulate root maturation and apical root-end closure. However, clinical outcomes are patient-dependent and unpredictable. The development of predictable clinical protocols is achieved through the interplay of the three classical elements of tissue engineering, namely, stem cells, signaling molecules, and scaffolds. Scaffolds provide structural support for cells to adhere and proliferate and also regulate cell differentiation and metabolism. Hence, designing and fabricating an appropriate scaffold is a crucial step in tissue engineering. In this review, four main classes of scaffolds used to engineer pulp-dentine complexes, including bioceramic-based scaffolds, synthetic polymer-based scaffolds, natural polymer-based scaffolds, and composite scaffolds, are covered. Additionally, recent advances in the design, fabrication, and application of such scaffolds are analysed along with their advantages and limitations. Finally, the importance of vascular network establishment in the success of pulp-dentine complex regeneration and strategies used to create scaffolds to address this challenge are discussed.

Advanced Biomaterials, Coatings, and Techniques: Applications in Medicine and Dentistry

The field of biomaterials is very extensive, encompassing both the materials themselves and the manufacturing methods, which are constantly developing [...]

Hypes and Hopes of Stem Cell Therapies in Dentistry: a Review

One of the most exciting advances in life science research is the development of 3D cell culture systems to obtain complex structures called organoids and spheroids. These 3D cultures closely mimic in vivo conditions, where cells can grow and interact with their surroundings. This allows us to better study the spatio-temporal dynamics of organogenesis and organ function. Furthermore, physiologically relevant organoids cultures can be used for basic research, medical research, and drug discovery. Although most of the research thus far focuses on the development of heart, liver, kidney, and brain organoids, to name a few, most recently, these structures were obtained using dental stem cells to study in vitro tooth regeneration. This review aims to present the most up-to-date research showing how dental stem cells can be grown on specific biomaterials to induce their differentiation in 3D. The possibility of combining engineering and biology principles to replicate and/or increase tissue function has been an emerging and exciting field in medicine. The use of this methodology in dentistry has already yielded many interesting results paving the way for the improvement of dental care and successful therapies.

Simvastatin treatment promotes proliferation of human dental pulp stem cells via modulating PI3K/AKT/miR-9/KLF5 signalling pathway

Simvastatin serves as an effective therapeutic potential in the treatment of dental disease via alternating proliferation of dental pulp stem cells. First, western-blot and real-time quantitative PCR were used to detect the effect of simvastatin or LY294002 on the expression levels of AKT, miR-9 and KLF5, or determine the effect of miR-9. Simvastatin, KLF5 and AKT significantly enhanced the proliferation of pulp stem cells, whilst this effect induced by simvastatin was suppressed by LY294002, AKT siRNA, KLF5 siRNA and miR-9, and simvastatin dose-dependently upregulated the expression of PI3K. Furthermore, simvastatin upregulated PI3K and p-AKT expression in a concentration-dependent manner. LY294002 abrogated the upregulation of p-AKT expression levels induced by simvastatin, and LY294002 induced the miR-9 expression and simvastatin dose-dependently inhibited the expression of miR-9, by contrast, LY294002 reduced the KLF5 expression and simvastatin dose-dependently promoted the expression of KLF5. And using computational analysis, KLF5 was found to be a candidate target gene of miR-9, and which was further verified using luciferase assay. Finally, the level of KLF5 in cells was much lower following the transfection with miR-9 and KLF5 siRNA, and the level of AKT mRNA in cells was significantly inhibited after transfection with AKT siRNA than control. These findings suggested simvastatin could promote the proliferation of pulp stem cells, possibly by suppressing the expression of miR-9 via activating the PI3K/AKT signalling pathway, and the downregulation of miR-9 upregulated the expression of its target gene, KLF5, which is directly responsible for the enhanced proliferation of pulp stem cells.

Effect of Magnesium on Dentinogenesis of Human Dental Pulp Cells

Introducing therapeutic ions into pulp capping materials has been considered a new approach for enhancing regeneration of dental tissues. However, no studies have been reported on its dentinogenic effects on human dental pulp cells (HDPCs). This study was designed to investigate the effects of magnesium (Mg2+) on cell attachment efficiency, proliferation, differentiation, and mineralization of HDPCs. HDPCs were cultured with 0.5 mM, 1 mM, 2 mM, 4 mM, and 8 mM concentrations of supplemental Mg2+ and 0 mM (control). Cell attachment was measured at 4, 8, 12, 16, and 20 hours. Cell proliferation rate was evaluated at 3, 7, 10, 14, and 21 days. Crystal violet staining was used to determine cell attachment and proliferation rate. Alkaline phosphatase (ALP) activity was assessed using the fluorometric assay at 7, 10, and 14 days. Mineralization of cultures was measured by Alizarin red staining. Statistical analysis was done using multiway analysis of variance (multiway ANOVA) with Wilks' lambda test. Higher cell attachment was shown with 0.5 mM and 1 mM at 16 hours compared to control (P < 0.0001). Cells with 0.5 mM and 1 mM supplemental Mg2+ showed significantly higher proliferation rates than control at 7, 10, 14, and 21 days (P < 0.0001). However, cell proliferation rates decreased significantly with 4 mM and 8 mM supplemental Mg2+ at 14 and 21 days (P < 0.0001). Significantly higher levels of ALP activity and mineralization were observed in 0.5 mM, 1 mM, and 2 mM supplemental Mg2+ at 10 and 14 days (P < 0.0001). However, 8 mM supplemental Mg2+ showed lower ALP activity compared to control at 14 days (P < 0.0001), while 4 mM and 8 mM supplemental Mg2+showed less mineralization compared to control (P < 0.0001). The study indicated that the optimal (0.5-2 mM) supplemental Mg2+ concentrations significantly upregulated HDPCs by enhancing cell attachment, proliferation rate, ALP activity, and mineralization. Magnesium-containing biomaterials could be considered for a future novel dental pulp-capping additive in regenerative endodontics.

Dentin-Pulp Complex Tissue Regeneration via Three-Dimensional Cell Sheet Layering

The dentin-pulp complex is a unique structure in teeth that contains both hard and soft tissues. Generally, deep caries and trauma cause damage to the dentin-pulp complex, and if left untreated, this damage will progress to irreversible pulpitis. The aim of this study was to fabricate a layered cell sheet composed of rat dental pulp (DP) cells and odontogenic differentiation of pulp (OD) cells and to investigate the ability to regenerate the dentin-pulp complex in a scaffold tooth. We fabricated two single cell sheets composed of DP cells (DP cell sheet) or OD cells (OD cell sheet) and a layered cell sheet made by layering both cells. The characteristics of the fabricated cell sheets were analyzed using light microscopy, scanning electron microscope (SEM), hematoxylin-eosin (HE) staining, and immunohistochemistry (IHC). Furthermore, the cell sheets were transplanted into the subrenal capsule of immunocompromised mice for 8 weeks. After this, the regenerative capacity to form dentin-like tissue was evaluated using micro-computed tomography (micro-CT), HE staining, and IHC. The findings of SEM and IHC confirmed that layered cell sheets fabricated by stacking OD cells and DP cells maintained their cytological characteristics. Micro-CT of layered cell sheet transplants revealed a mineralized capping of the access cavity in the crown area, similar to that of natural dentin. In contrast, the OD cell sheet group demonstrated the formation of irregular fragments of mineralized tissue in the pulp cavity, and the DP cell sheet did not develop any hard tissue. Moreover, bone volume/tissue volume (BV/TV) showed a significant increase in hard tissue formation in the layered cell sheet group compared with that in the single cell sheet group (p < 0.05). HE staining also showed a combination of soft and hard tissue formation in the layered cell sheet group. Furthermore, IHC confirmed that the dentin-like tissue generated from the layered cell sheet expressed characteristic markers of dentin but not bone equivalent to that of a natural tooth. In conclusion, this study demonstrates the feasibility of regenerating dentin-pulp complex using a bioengineered tissue designed to simulate the anatomical structure. Impact statement The dentin-pulp complex can be destroyed by deep caries and trauma, which may cause pulpitis and progress to irreversible pulpitis, apical periodontitis, and even tooth loss. Current treatments cannot maintain pulp health, and teeth can become brittle. We developed a three-dimensional (3D) layered cell sheet using dental pulp cells and odontogenic differentiation of pulp cells for dentin-pulp complex regeneration. Our layered cell sheet enables the regeneration of an organized 3D dentin-pulp-like structure comparable with that of natural teeth. This layered cell sheet technology may contribute to dentin-pulp complex regeneration and provide a novel method for complex tissue engineering.

The Emerging Role of Stem Cells in Regenerative Dentistry

Progress of modern dentistry is accelerating at a spectacular speed in the scientific, technological and clinical areas. Practical examples are the advancement in the digital field, which has guaranteed an average level of prosthetic practices for all patients, as well as other scientific developments, including research on stem cell biology. Given their plasticity, defined as the ability to differentiate into specific cell lineages with a capacity of almost unlimited self-renewal and release of trophic/immunomodulatory factors, stem cells have gained significant scientific and commercial interest in the last 15 years. Stem cells that can be isolated from various tissues of the oral cavity have emerged as attractive sources for bone and dental regeneration, mainly due to their ease of accessibility. This review will present the current understanding of emerging conceptual and technological issues of the use of stem cells to treat bone and dental loss defects. In particular, we will focus on the clinical application of stem cells, either directly isolated from oral sources or in vitro reprogrammed from somatic cells (induced pluripotent stem cells). Research aimed at further unraveling stem cell plasticity will allow to identify optimal stem cell sources and characteristics, to develop novel regenerative tools in dentistry.

Multifunctional peptide-conjugated nanocarriers for pulp regeneration in a full-length human tooth root

Dental pulp is a highly vascularized tissue, situated in an inextensible environment surrounded by rigid dentinal walls. The pulp receives its blood supply solely from the small apical foramen of a tooth root. Due to the unique anatomy that controls nutrition supply, regeneration of pulp tissue in a full-length tooth root has long been a challenge in regenerative endodontics. In this study, we designed and synthesized a multifunctional peptide-conjugated, pH-sensitive, non-viral gene vector for fast revascularization and pulp regeneration in a full-length human tooth root. The multifunctional peptide was designed to have distinctive features, including a cell-penetrating peptide to enhance cellular uptake, a nuclear localization signal peptide to assist in the translocation of an angiogenic gene into the nucleus, and a fluorescent tryptophan residue to visualize and quantify the transfection efficiency. Furthermore, a pH-sensitive dimethylmaleic anhydride (DMA) was integrated with the multifunctional peptide to enhance the transfected gene complex to escape from endosomes/lysosomes after internalization. In vitro experiments showed that the multifunctional non-viral gene vector significantly increased internalization and gene transfection efficiency as well as reduced cytotoxicity. After dental pulp stem cells (DPSCs) were transfected with the multifunctional gene vector/pVEGF complexes, the expression of VEGF from the DPSCs was upregulated for more than eight folds, which in turn greatly enhanced endothelial cell migration and vascular-like tube formation. Six weeks after implantation, the VEGF-transfected DPSCs accelerated new blood vessel formation and the regenerated pulp tissue occupied most of the area in the canal of a full-length human tooth root. The multifunctional peptide conjugated non-viral gene delivery is a safe and effective approach for regenerative endodontics. STATEMENT OF SIGNIFICANCE: Pulp regeneration in a full-length tooth root canal has long been a challenge in regenerative endodontics. This is due to the unique root anatomy that allows the blood supply of the tooth root only from a small apical foramen (< 1 mm), leading to a severe barrier for revascularization during pulp regeneration. In this work, we designed a multifunctional peptide-conjugated, pH-sensitive, non-viral gene vector to address this challenge. Our work shows that the peptide-conjugated system was an excellent carrier for fast revascularization and pulp tissue regeneration in a full-length toot root. This study will interest the multidisciplinary readership in gene delivery, biomaterials, and dental/craniofacial tissue engineering community.

Methylglyoxal-Dependent Glycative Stress Is Prevented by the Natural Antioxidant Oleuropein in Human Dental Pulp Stem Cells through Nrf2/Glo1 Pathway

Methylglyoxal (MG) is a potent precursor of glycative stress (abnormal accumulation of advanced glycation end products, AGEs), a relevant condition underpinning the etiology of several diseases, including those of the oral cave. At present, synthetic agents able to trap MG are known; however, they have never been approved for clinical use because of their severe side effects. Hence, the search of bioactive natural scavengers remains a sector of strong research interest. Here, we investigated whether and how oleuropein (OP), the major bioactive component of olive leaf, was able to prevent MG-dependent glycative stress in human dental pulp stem cells (DPSCs). The cells were exposed to OP at 50 µM for 24 h prior to the administration of MG at 300 µM for additional 24 h. We found that OP prevented MG-induced glycative stress and DPSCs impairment by restoring the activity of Glyoxalase 1 (Glo1), the major detoxifying enzyme of MG, in a mechanism involving the redox-sensitive transcription factor Nrf2. Our results suggest that OP holds great promise for the development of preventive strategies for MG-derived AGEs-associated oral diseases and open new paths in research concerning additional studies on the protective potential of this secoiridoid.

Clinical cell-based versus cell-free regenerative endodontics: clarification of concept and term

There is no consensus on the true meaning of clinical regenerative endodontics, and there is confusion over the concept and the term. Commonly used terms include revitalization and revascularization. The clinical methods for endodontic revitalization procedures and the tissue engineering concept differ depending on whether there is exogenous delivery of cells - called cell therapy, or not. Here, in this review, the difference is clarified by emphasizing the correct terminology: cell-free versus cell-based regenerative endodontic therapy (CF-RET versus CB-RET). The revitalization procedures practised clinically do not fit into the modern tissue engineering concepts of pulp regeneration but can be categorized as CF-RET. The modern tissue engineering concept in pulp regeneration is a CB-RET, which so far is at the clinical trial stage. However, histological examination of teeth following regenerative endodontic treatments reveals healing with repair derived from stem cells that originate from the periodontal, bone and other tissues. The aim of regenerative endodontics is regeneration of the pulp-dentine complex. This review discusses why CF-RET is unlikely to regenerate a pulp-dentine complex with current protocols. The American Association of Endodontists and the European Society of Endodontology have not yet recommended autologous stem cell transplantation (CB-RERT) which aspires for regeneration. Therefore, an understanding of the concept, term, difficulties and differences in current protocols is important for the clinician. However, rather than being discouraged that ideal regeneration has not been achieved to date, repair can be an acceptable outcome in clinical regenerative endodontics as it has also been accepted in medicine. Repair should also be considered in the context that resolution of the clinical signs/symptoms of pulp necrosis/apical periodontitis is generally reliably obtained in clinical regenerative endodontics.

Angiogenesis in Regenerative Dentistry: Are We Far Enough for Therapy?

Angiogenesis is a broad spread term of high interest in regenerative medicine and tissue engineering including the dental field. In the last two decades, researchers worldwide struggled to find the best ways to accelerate healing, stimulate soft, and hard tissue remodeling. Stem cells, growth factors, pathways, signals, receptors, genetics are just a few words that describe this area in medicine. Dental implants, bone and soft tissue regeneration using autologous grafts, or xenografts, allografts, their integration and acceptance rely on their material properties. However, the host response, through its vascularization, plays a significant role. The present paper aims to analyze and organize the latest information about the available dental stem cells, the types of growth factors with pro-angiogenic effect and the possible therapeutic effect of enhanced angiogenesis in regenerative dentistry.

Comparative assessment of titanium-prepared platelet-rich fibrin, EndoSequence root repair material, and calcium hydroxide as pulpotomy agents in permanent teeth with irreversible pulpitis: A randomized controlled trial

Context:

Pulpotomy is a procedure in which part of an exposed vital pulp is removed, usually as a means of preserving the vitality and function of the remaining part.

Aim:

The aim is to compare the effectiveness of Dycal (CH), EndoSequence, and Titanium-prepared platelet-rich fibrin with EndoSequence (T-PRF) as pulpotomy agents in mature permanent molars with irreversible pulpitis.

Settings and Design:

Sixty permanent mandibular molars with carious exposure and symptoms of irreversible pulpitis were randomly allocated to three groups.

Subjects and Methods:

Full pulpotomy was performed using Dycal, EndoSequence, and T-PRF with EndoSequence as pulpotomy agents. Pain intensity was analyzed using a Numeric Rating Scale score at baseline 24 h, 7 days, 6 months, and 1 year. The clinical and radiographic evaluations were done at 6 months and 1 year.

Statistical Analysis:

Nonparametric tests (Kruskal–Wallis, Chi-square) were applied to analyze the data as the normality test does not follow a normal distribution.

Results:

T-PRF and EndoSequence showed effective results when compared clinically, and there was no significant difference between radiographic success rates among the three groups at (P = 0.325 at 6 months, 0.466 at 12 months) follow-up.

Conclusion:

T-PRF and EndoSequence showed higher success rates among Dycal, EndoSequence as pulpotomy agents in teeth with irreversible pulpitis.

A Clinical and Radiographic Comparison of Platelet-rich Fibrin and Lyophilized Platelet-derived Preparation as Pulpotomy Agent in Primary Molars

Introduction:

Vital pulpotomy in primary molar teeth is aimed to retain the tooth in function until it is replaced by its successors.

Aim:

The aim of this study was to evaluate and compare platelet-rich fibrin (PRF) and lyophilized platelet-derived preparation (LPDP) as a pulpotomy agent in primary molars.

Materials and Methods:

Forty primary molars from 20 healthy children aged 5–9 years requiring pulpotomy in the contralateral side of mandible were randomly selected. In both the groups, pulpotomy was carried out by removing coronal pulp and achieving hemostasis, the radicular part of pulp tissue was packed with PRF preparation in Group I and LPDP (Mothercell Research Centre, Trichy, Tamil Nadu, India) in Group II. The teeth were restored with zinc oxide eugenol and glass ionomer cement (GIC), followed by stainless steel crown in the same visit. Clinical and radiographic evaluation was undertaken at 1, 3, and 6 months interval.

Results:

The overall success rate was 90% in PRF group and 95% in LPDP group at the end of 6 months. The results were statistically nonsignificant between the groups (P > 0.05).

Conclusion:

The overall outcome of the study suggests that PRF and LPDP are acceptable pulpotomy agents and are promising in the era of new vital pulp therapy procedure.

Physiopathology of nitric oxide in the oral environment and its biotechnological potential for new oral treatments: a literature review

OBJECTIVES

A narrative review on the NO properties and their relationship with the oral environment describing NO's molecular origin, role, and perspectives regarding oral pathological, physiological, and regenerative processes for future applications and possible use as prevention or treatment in dentistry.

MATERIALS AND METHODS

Pubmed was searched using the word "nitric oxide." Reviews, clinical studies, and experimental studies were eligible for the screening process. Similar search procedures were then performed with the additional search words "conservative dentistry," "orthodontics," "endodontics," "implants," "periodontics," "oral cancer," "pulp revascularization," and "oral surgery." Furthermore, references of included articles were examined to identify further relevant articles.

RESULTS

There is a relationship between NO production and oral diseases such as caries, periodontal diseases, pulp inflammation, apical periodontitis, oral cancer, with implants, and orthodontics. Studies on this relationship and uses of NO, in diagnosis, prevention, and treatment, are being developed. Also, some NO and oral cavity patents have already registered.

CONCLUSIONS

The understanding of how NO can interfere in oral health maintenance or disease processes can contribute to elucidate the disease development and optimize treatment approaches.

CLINICAL RELEVANCE

NO has considerable biotechnological potential and can contribute to improving diagnostics and treating the oral environment. As a biomarker, NO has an important role in the early diagnosis of diseases. Regarding treatments, NO can possibly be used as a regulator of inflammation, anti-biofilm action, replacing antibiotics, inducing apoptosis of cancerous cells, and contributing to the angiogenesis. All these studies are initial considerations regarding the relationship between NO and dentistry.

Fabrication of Tapered Fluidic Microchannels Conducive to Angiogenic Sprouting within Gelatin Methacryloyl Hydrogels

INTRODUCTION

The transplantation of stem cells/tissue constructs into root canal space is a promising strategy for regenerating lost pulp tissue. However, the root canal system, which is cone shaped with a taper from the larger coronal end to the smaller apical end, limits the vascular supply and, therefore, the regenerative capacity. The current study aimed to fabricate built-in microchannels with different tapers to explore various approaches to endothelialize these microchannels.

METHODS

The fluidic microchannels with varying tapers (parallel, 0.04, and 0.06) were fabricated within gelatin methacryloyl (GelMA) hydrogel (with or without stem cell from the apical papilla [SCAP] encapsulation) of different concentrations (5%, 7.5%, and 10% [w/v]). Green fluorescent protein-expressing human umbilical vein endothelial cells (HUVECs-GFP) were seeded alone or with SCAPs in coculture into these microchannels. Angiogenic sprouting was assessed by fluorescence and a confocal microscope and ImageJ software (National Institutes of Health, Bethesda, MD). Immunostaining was conducted to illustrate monolayer formation. Data were statistically analyzed by 1-way/2-way analysis of variance.

RESULTS

HUVEC-only inoculation formed an endothelial monolayer inside the microchannel without angiogenic sprouting. HUVECs-GFP/SCAPs cocultured at a 1:1 ratio produced the longest sprouting compared with the other 3 ratios. The average length of the sprouting in the 0.04 taper microchannel was significantly longer compared with that in the parallel and 0.06 taper microchannels. Significant differences in HUVEC-GFP sprouting were observed in 5% GelMA hydrogel. Encapsulation of SCAPs within hydrogel further stimulated the sprouting of HUVECs.

CONCLUSIONS

The coculture of SCAPs and HUVECs-GFP at a ratio of 1:1 in 0.04 taper fluidic microchannels fabricated with 5% (w/v) GelMA hydrogel with SCAPs encapsulated was found to be the optimal condition to enhance angiogenesis inside tapered microchannels.

Dental Tissue-Derived Human Mesenchymal Stem Cells and Their Potential in Therapeutic Application

Human mesenchymal stem cells (hMSCs) are multipotent cells, which exhibit plastic adherence, express specific cell surface marker spectrum, and have multi-lineage differentiation potential. These cells can be obtained from multiple tissues. Dental tissue-derived hMSCs (dental MSCs) possess the ability to give rise to mesodermal lineage (osteocytes, adipocytes, and chondrocytes), ectodermal lineage (neurocytes), and endodermal lineages (hepatocytes). Dental MSCs were first isolated from dental pulp of the extracted third molar and till now they have been purified from various dental tissues, including pulp tissue of permanent teeth and exfoliated deciduous teeth, apical papilla, periodontal ligament, gingiva, dental follicle, tooth germ, and alveolar bone. Dental MSCs are not only easily accessible but are also expandable in vitro with relative genomic stability for a long period of time. Moreover, dental MSCs have exhibited immunomodulatory properties by secreting cytokines. Easy accessibility, multi-lineage differentiation potential, and immunomodulatory effects make dental MSCs distinct from the other hMSCs and an effective tool in stem cell-based therapy. Several preclinical studies and clinical trials have been performed using dental MSCs in the treatment of multiple ailments, ranging from dental diseases to nondental diseases. The present review has summarized dental MSC sources, multi-lineage differentiation capacities, immunomodulatory features, its potential in the treatment of diseases, and its application in both preclinical studies and clinical trials. The regenerative therapeutic strategies in dental medicine have also been discussed.

Comparative evaluation of platelet-rich fibrin, platelet-rich fibrin + 50 wt% nanohydroxyapatite, platelet-rich fibrin + 50 wt% dentin chips on odontoblastic differentiation - An in vitro study-part 2

AIM

The purpose of this study was to investigate the effects of platelet-rich fibrin (PRF) modified with bioactive radiopacifiers-nanohydroxyapatite (nHA) and dentin chips (DC) on odontoblastic differentiation in human dental pulp cells (HDPCs).

SUBJECTS AND METHODS

PRF was modified with 50wt% of nHA (G bone-SHAG31, Surgiwear Company) and 50 wt% of DC. HDPSCs differentiation and mineralization by the groups ([Group A - Control (Dimethyl sulfoxide), Group B - PRF, Group C - PRF + nHA, Group D - PRF + DC]) were assessed. ELISA was done to quantify the interleukin (IL)-6 and IL-8 cytokine expression. The odontoblastic differentiation was determined by the expression of odontogenesis-related genes and the extent of mineralization using alizarin red S staining.

STATISTICAL ANALYSIS USED

One-way ANOVA with post hoc Tukey-honestly significant difference tests were applied to assess the significance among various groups.

RESULTS

The level of inflammatory cytokines (IL-6 and IL-8) expression by Group D (PRF + 50 wt% DC) was higher compared to Group B (PRF) and Group C (PRF + 50 wt% DC). Group C (PRF + 50 wt% nHA) induced more mineralization nodules compared to other groups. The integrated density value for the DSPP and DMP-1 protein expression by Group C (PRF + 50 wt% nHA) and Group D (PRF + 50 wt% DC) was higher compared to Group B (PRF).

CONCLUSIONS

The results suggest that the addition of bioactive radiopacifiers into PRF has a synergistic effect on the stimulation of odontoblastic differentiation of HDPCs, hence inducing mineralization.

Human Umbilical Cord Mesenchymal Stem Cell Differentiation Into Odontoblast-Like Cells and Endothelial Cells: A Potential Cell Source for Dental Pulp Tissue Engineering

OBJECTIVES

Dental pulp regeneration is considered an ideal approach for treating dental pulp disease. Because pulp is composed of various cells, determining the proper seed cells is critical. We explored the potential of human umbilical cord mesenchymal stem cells (hUCMSCs) as seed cells for dental pulp regeneration.

METHODS

Liquid extract of human treated dentin matrix (LE-TDM) was acquired to culture hUCMSCs. Odontoblast-specific markers were detected by western blot, qRT-PCR, and immunofluorescence assays. Endothelial differentiation of hUCMSCs was examined according to VEGF induction by western blot, qRT-PCR, and Matrigel assays. hUCMSCs and VEGF-induced hUCMSCs (V-hUCMSCs) were also cocultured in vivo for the Matrigel plug assay and in vitro for RNA-sequencing (RNA-seq). Finally, encapsulated mono-cultured hUCMSCs or cocultured hUCMSCs and V-hUCMSCs in scaffolds were injected into the root segments and transplanted into immunodeficient mice for dental pulp regeneration.

RESULTS

Under LE-TDM induction, hUCMSCs expressed specific odontoblast markers (DSPP, DMP-1, DSP). Under VEGF induction, hUCMSCs expressed functional endothelial markers (CD31, eNOs, vWF). In vivo, the Matrigel plug assay indicated that cocultured hUCMSCs and V-hUCMSCs formed extensive vessel-like structures. RNA-seq results indicated that cocultured V-hUCMSCs exhibited high Hif-1 signaling pathway activity. Both the hUCMSCs mono-culture and coculture groups showed pulp-like tissue regeneration. The cocultured group showed more extracellular matrix and vascularization than the mono-cultured group in vivo.

CONCLUSION

hUCMSCs can differentiate into odontoblast-like cells and functional endothelial cells. Cocultured hUCMSCs and V-hUCMSCs formed vessel-like structures and regenerated dental pulp-like tissue. Therefore, hUCMSCs can be used as an alternative seed cell source for angiogenesis and dental pulp regeneration.

Mussel-Inspired Biocoating for Improving the Adhesion of Dental Pulp Stem Cells in Dental Pulp Regeneration

Dental pulp engineering possesses a promising perspective to replacing lost pulp in the root canal and restoring its functions. Stable adhesion of dental pulp stem cells (DPSCs) on the root canal dentin wall is a key element required for reconstruction of a functional odontoblast layer in dental pulp regeneration. To address this challenge, dopamine-modified hyaluronic acid (DA-HA) is coated on dentin to obtain a stable adhesion of DPSCs. The dopamine segment provides adhesion ability to the coating, and the hyaluronic acid increases the biocompatibility. The results show that DPSCs can adhere on the DA-HA coated dentin slice better than those without coating. Simultaneously, DPSCs proliferation can be further promoted on the prepared coating. Therefore, the DA-HA coating may provide a possible way to immobilize odontoblast cell onto dentin surface for pulp regeneration.

Injectable Biomaterials for Dental Tissue Regeneration

Injectable biomaterials scaffolds play a pivotal role for dental tissue regeneration, as such materials are highly applicable in the dental field, particularly when compared to pre-formed scaffolds. The defects in the maxilla-oral area are normally small, confined and sometimes hard to access. This narrative review describes different types of biomaterials for dental tissue regeneration, and also discusses the potential use of nanofibers for dental tissues. Various studies suggest that tissue engineering approaches involving the use of injectable biomaterials have the potential of restoring not only dental tissue function but also their biological purposes.

Hand-held bioprinting for de novo vascular formation applicable to dental pulp regeneration

Aim of the study: Deep carious lesions may cause irreversible pulpitis and the current endodontic treatment typically removes the whole dental pulp tissue, which finally reduces lifespan of the teeth. Nowadays, the most frequent treatment is based on removing the infected tissue and filling the root canal with inert synthetic materials. Tissue engineering approaches are important alternatives to the current treatment, because they can potentially maintain the biological function of the tooth instead of sacrificing it.Materials and Methods: In this study, we propose a tissue engineering approach based on a hand-held in situ bioprinting strategy. Our approach enabled bioprinting of cell-loaded collagen-based bioinks with suitable rheological, structural and biological properties, which allowed for vasculogenesis in the root canal.Results: The rheological properties of the bioprintable bioink were measured by oscillatory amplitude sweep testing and were corroborated by macroscopic evaluation after in vitro culture, in which printed bioinks maintained their original form without contraction. Moreover, we showed evidence for successful vasculogenesis in bioprintable bioinks with comparable quality and quantity to control fibrin and collagen non-bioprintable hydrogels.Conclusions: We conclude that hand-held bioprinting holds potential for in situ treatment of dental diseases with successful evidence for vascular tube formation, as an asset for maintenance of the biological function of the tooth.

Evaluation of growth, stemness, and angiogenic properties of dental pulp stem cells cultured in cGMP xeno-/serum-free medium

This study was aimed to investigate the effects of cGMP xeno-/serum-free medium (XSF, Irvine Scientific) on the properties of human dental pulp stem cells (DPSCs). DPSCs, from passage 2, were cultured in XSF or fetal bovine serum (FBS)-supplemented medium, and sub-cultured up to passage 8. Cumulative population doublings (PDs) and the number of colony-forming-units (CFUs) were determined. qRT-PCR, ELISA, and in vitro assays were used to assess angiogenic capacity. Flow cytometry was used to measure CD73, CD90, and CD105 expression. Differentiation into osteo-, adipo-, and chondrogenic cell lineages was performed. DPSCs showed more elongated morphology, a reduced rate of proliferation at later passages, and lower CFU counts in XSF compared with FBS. Expression of angiogenic factors at the gene and protein levels varied in the two media and with passage number, but cells grown in XSF had more in vitro angiogenic activity. The majority of early and late passage DPSCs cultured in XSF expressed CD73 and CD90. In contrast, the percentage of CD105 positive DPSCs in XSF medium was significantly lower with increased passage whereas the majority of cells cultured in FBS were CD105 positive. Switching XSF-cultured DPSCs to medium supplemented with human serum restored the expression of CD105. The tri-lineage differentiation of DPSCs cultured under XSF and FBS conditions was similar. We showed that despite reduced CD105 expression levels, DPSCs expanded in XSF medium maintained a functional MSC phenotype. Furthermore, restoration of CD105 expression is likely to occur upon in vivo transplantation, when cells are exposed to human serum.

Polymeric scaffolds for dental pulp tissue engineering: A review

OBJECTIVES

The purpose of this review is to describe recent developments in pulp tissue engineering using scaffolds and/or stem cells. It is crucial to understand how this approach can revitalize damaged dentin-pulp tissue. Widespread scaffold materials, both natural and synthetic, and their fabrication methods, and stem-progenitor cells with the potential of pulp regeneration will be discussed.

DATA AND SOURCES

A review of literature was conducted through online databases, including MEDLINE by using the PubMed search engine, Scopus, and the Cochrane Library.

STUDY SELECTION

Studies were selected based on relevance, with a preference given to recent research, particularly from the past decade.

CONCLUSIONS

The use of biomaterial scaffolds and stem cells can be safe and potent for the regeneration of pulp tissue and re-establishment of tooth vitality. Natural and synthetic polymers have distinct advantages and limitations and in vitro and in vivo testing have produced positive results for cell attachment, proliferation, and angiogenesis. The type of biomaterial used for scaffold fabrication also facilitates stem cell differentiation into odontoblasts and the resulting biochemistry of tissue repair for each polymer and cell type was discussed. Multiple methods of scaffold design exist for pulp tissue engineering, which demonstrates the variability in tissue engineering applications in endodontics. This review explains the potential of evidence-based tissue engineering strategies and outcomes in pulp regeneration.

Differentiation of dental pulp stem cells into neuron-like cells

Background and objectives: With regard to their ease of harvest and common developmental origin, dental pulp stem cells (DPSCs) may act as a favorable source of stem cells in generation of nerves. Moreover; cellular migration and differentiation as well as survival, self-renewal, and proliferation of neuroprogenitor species require the presence of the central nervous system (CNS) mitogens including EGF and bFGF. Accordingly, the possibility of the induction of neuronal differentiation of DPSCs by EGF and bFGF was evaluated in the present study.Materials and methods: DPSCs were treated with 20 ng/ml EGF, 20 ng/ml bFGF, and 10 µg/ml heparin. In order to further induce the neuroprogenitor differentiation, DPSC-derived spheres were also incubated in serum-free media for three days. The resulting spheres were then cultured in high-glucose Dulbecco's Modified Eagle Medium (DMEM) with 10% FBS. The morphology of the cells and the expression of the differentiation markers were correspondingly analyzed by quantitative polymerase chain reaction (qPCR), western blotting, and immunofluorescence (IF).Results: The EGF/bFGF-treated DPSCs showed significant increase in the expression of the neuroprogenitor markers of Nestin and SRY (sex determining region Y)-box 2 (SOX2), 72 h after treatment. The up-regulation of Nestin and SOX2 induced by growth factors was confirmed using western blotting and IF. The cultures also yielded some neuron-like cells with a significant rise in Nestin, microtubule-associated protein 2 (MAP2), and Neurogenin 1 (Ngn1) transcript levels; compared with cells maintained in the control media (p < 0.05).Conclusion: DPSCs seemed to potentially differentiate into neuron-like cells under the herein-mentioned treatment conditions.

The effect of hyaluronic acid hydrogels on dental pulp stem cells behavior

Dental caries and trauma, particularly in childhood, are among the most prevalent teeth problems, which result in the creation of cavities and probably tooth loss. Thus, novel regenerative approaches with high efficiency and less toxicity are required. Stem cell therapy along with the implementation of scaffolds has provided excellent opportunities in the regeneration of teeth structure. Hyaluronic acid (HA) hydrogels have enticed great attention in the field of regenerative medicine. The unique chemical and structural properties of HA and its derivatives have enabled their application in tissue engineering. Several factors such as the location and type of the lesion, teeth age, the type of capping materials determine the success rate of pulp therapy. HA hydrogels have been considered as biocompatible and safe scaffold supports in human dental cell therapies.

Oral Bone Tissue Engineering: Advanced Biomaterials for Cell Adhesion, Proliferation and Differentiation

The advancements made in biomaterials have an important impact on oral tissue engineering, especially on the bone regeneration process. Currently known as the gold standard in bone regeneration, grafting procedures can sometimes be successfully replaced by a biomaterial scaffold with proper characteristics. Whether natural or synthetic polymers, biomaterials can serve as potential scaffolds with major influences on cell adhesion, proliferation and differentiation. Continuous research has enabled the development of scaffolds that can be specifically designed to replace the targeted tissue through changes in their surface characteristics and the addition of growth factors and biomolecules. The progress in tissue engineering is incontestable and research shows promising contributions to the further development of this field. The present review aims to outline the progress in oral tissue engineering, the advantages of biomaterial scaffolds, their direct implication in the osteogenic process and future research directions.

Synergistic potential of 1α,25-dihydroxyvitamin D3 and calcium-aluminate-chitosan scaffolds with dental pulp cells

OBJECTIVES

This study aimed to develop a porous chitosan-calcium-aluminate scaffold (CH-AlCa) in combination with a bioactive dosage of 1α,25-dihydroxyvitamin D3 (1α,25VD), to be used as a bioactive substrate capable to increase the odontogenic potential of human dental pulp cells (HDPCs).

MATERIALS AND METHODS

The porous CH-AlCa was developed by the incorporation of an AlCa suspension into a CH solution under vigorous agitation, followed by phase separation at low temperature. Scaffold architecture, porosity, and calcium release were evaluated. Thereafter, the synergistic potential of CH-AlCa and 1 nM 1α,25VD, selected by a dose-response assay, for HDPCs seeded onto the materials was assessed.

RESULTS

The CH-AlCa featured an organized and interconnected pore network, with increased porosity in comparison with that of plain chitosan scaffolds (CH). Increased odontoblastic phenotype expression on the human dental pulp cell (HDPC)/CH and HDPC/CH-AlCa constructs in the presence of 1 nM 1α,25VD was detected, since alkaline phosphatase activity, mineralized matrix deposition, dentin sialophosphoprotein/dentin matrix acidic phosphoprotein 1 mRNA expression, and cell migration were overstimulated. This drug featured a synergistic effect with CH-AlCa, since the highest values of cell migration and odontoblastic markers expression were observed in this experimental condition.

CONCLUSIONS

The experimental CH-AlCa scaffold increases the chemotaxis and regenerative potential of HDPCs, and the addition of low-dosage 1α,25VD to this scaffold enhances the potential of these cells to express an odontoblastic phenotype.

CLINICAL RELEVANCE

Chitosan scaffolds enriched with calcium-aluminate in association with low dosages of 1α,25-dihydroxyvitamin D3 provide a highly bioactive microenvironment for dental pulp cells prone to dentin regeneration, thus providing potential as a cell-free tissue engineering system for direct pulp capping.

Angiogenic effect of platelet-rich concentrates on dental pulp stem cells in inflamed microenvironment

OBJECTIVE

In this study, we aimed to determine the suitable concentrations of human platelet lysate (HPL) and platelet-rich plasma (PRP) for maintaining the in vitro proliferative and angiogenic potential of inflamed dental pulp stem cells.

MATERIALS AND METHODS

Lipopolysaccharide (LPS)-induced inflamed dental pulp-derived stem cells (iDPSCs) were treated with different concentrations of HPL and PRP (10% and 20%) followed by determination of viability using Alamar Blue assay. Expression of angiogenesis-, adhesion-, and inflammation-regulating genes was also analyzed using RT-qPCR array. Furthermore, expression of growth factors at protein level in the cell culture microenvironment was measured using multiplex assay.

RESULTS

Viability of iDPSCs was significantly (p < 0.05) higher in 20% HPL-supplemented media compared to iDPSCs. Expression of 10 out of 12 selected angiogenic genes, four out of seven adhesion molecules, and seven out of nine cytokine-producing genes were significantly (p < 0.05) higher in cells maintained in 20% HPL-supplemented media compared to that in FBS-supplemented media. Furthermore, expression of all the selected growth factors was significantly higher (p < 0.05) in the supernatants from 20% HPL media at 12 and 24 h post-incubation.

CONCLUSION

This study suggests that 20% HPL could be optimum to stimulate angiogenesis-related factors in iDPSCs while maintaining their viability.

CLINICAL RELEVANCE

This data may suggest the potential use of 20% HPL for expanding DPSCs scheduled for clinical trials for regenerative therapies including dental pulp regeneration.

Present and future of tissue engineering scaffolds for dentin-pulp complex regeneration

More than two thirds of the global population suffers from tooth decay, which results in cavities with various levels of lesion severity. Clinical interventions to treat tooth decay range from simple coronal fillings to invasive root canal treatment. Pulp capping is the only available clinical option to maintain the pulp vitality in deep lesions, but irreversible pulp inflammation and reinfection are frequent outcomes for this treatment. When affected pulp involvement is beyond repair, the dentist has to perform endodontic therapy leaving the tooth non-vital and brittle. On-going research strategies have failed to overcome the limitations of existing pulp capping materials so that healthy and progressive regeneration of the injured tissues is attained. Preserving pulp vitality is crucial for tooth homeostasis and durability, and thus, there is a critical need for clinical interventions that enable regeneration of the dentin-pulp complex to rescue millions of teeth annually. The identification and development of appropriate biomaterials for dentin-pulp scaffolds are necessary to optimize clinical approaches to regenerate these hybrid dental tissues. Likewise, a deep understanding of the interactions between the micro-environment, growth factors, and progenitor cells will provide design basis for the most fitting scaffolds for this purpose. In this review, we first introduce the long-lasting clinical dental problem of rescuing diseased tooth vitality, the limitations of current clinical therapies and interventions to restore the damaged tissues, and the need for new strategies to fully revitalize the tooth. Then, we comprehensively report on the characteristics of the main materials of naturally-derived and synthetically-engineered polymers, ceramics, and composite scaffolds as well as their use in dentin-pulp complex regeneration strategies. Finally, we present a series of innovative smart polymeric biomaterials with potential to overcome dentin-pulp complex regeneration challenges.

Pulp Regeneration Concepts for Nonvital Teeth: From Tissue Engineering to Clinical Approaches

Following the basis of tissue engineering (Cells-Scaffold-Bioactive molecules), regenerative endodontic has emerged as a new concept of dental treatment. Clinical procedures have been proposed by endodontic practitioners willing to promote regenerative therapy. Preserving pulp vitality was a first approach. Later procedures aimed to regenerate a vascularized pulp in necrotic root canals. However, there is still no protocol allowing an effective regeneration of necrotic pulp tissue either in immature or mature teeth. This review explores in vitro and preclinical concepts developed during the last decade, especially the potential use of stem cells, bioactive molecules, and scaffolds, and makes a comparison with the goals achieved so far in clinical practice. Regeneration of pulp-like tissue has been shown in various experimental conditions. However, the appropriate techniques are currently in a developmental stage. The ideal combination of scaffolds and growth factors to obtain a complete regeneration of the pulp-dentin complex is still unknown. The use of stem cells, especially from pulp origin, sounds promising for pulp regeneration therapy, but it has not been applied so far for clinical endodontics, in case of necrotic teeth. The gap observed between the hope raised from in vitro experiments and the reality of endodontic treatments suggests that clinical success may be achieved without external stem cell application. Therefore, procedures using the concept of cell homing, through evoked bleeding that permit to recreate a living tissue that mimics the original pulp has been proposed. Perspectives for pulp tissue engineering in the near future include a better control of clinical parameters and pragmatic approach of the experimental results (autologous stem cells from cell homing, controlled release of growth factors). In the coming years, this therapeutic strategy will probably become a clinical reality, even for mature necrotic teeth.

Effects of the nitric oxide releasing biomimetic nanomatrix gel on pulp-dentin regeneration: Pilot study

Successful disinfection alongside complete endodontic tissue regeneration and revascularization are the most desired clinical outcomes of regenerative endodontics. Despite reported clinical successes, significant limitations to the current regenerative endodontic procedure (REP) have been elucidated. To improve the current REP, an antibiotics and nitric oxide (NO) releasing biomimetic nanomatrix gel was developed. The study evaluates antibacterial effects of an antibiotics and NO releasing biomimetic nanomatrix gel on multispecies endodontic bacteria. Antibiotics, ciprofloxacin (CF) and metronidazole (MN) were mixed and encapsulated within the NO releasing biomimetic nanomatrix gel. The gel was synthesized and self-assembled from peptide amphiphiles containing various functional groups. Antibacterial effects of the antibiotics and NO releasing biomimetic nanomatrix gel were evaluated using bacterial viability assays involving endodontic microorganisms including clinical samples. Pulp-dentin regeneration was evaluated via animal-model experiments. The antibiotics and NO releasing biomimetic nanomatrix gel demonstrated a concentration dependent antibacterial effect. In addition, NO alone demonstrated a concentration dependent antibacterial effect on endodontic microorganism. An in vivo analysis demonstrated the antibiotics and NO releasing biomimetic nanomatrix gel promoted tooth revascularization with maturation of root canals. An optimal concentration of and NO releasing nanomatrix gel is suggested for its potential as a root treatment material for REP and an appropriate protocol for human trials. Further investigation is required to obtain a larger sample size and decide upon ideal growth factor incorporation.

Top-cited Articles in Regenerative Endodontics: A Bibliometric Analysis

INTRODUCTION

Bibliometric analysis is a method for quantifying the research productivity, author performance, and manuscript impact. The citation count received by a scientific article is one of the indicators of its impact within a field. The purpose of this study was to identify the 100 top-cited articles published in regenerative endodontics and to analyze their main characteristics.

METHODS

Thomson Reuters Web of Science was searched to retrieve the 100 most-cited articles in "regenerative endodontics" published from January 1991 to February 2018 in the category of "Dentistry, Oral Surgery and Medicine." Among the included top-cited articles, the following parameters were recorded and analyzed: journal name, authors, institution, country, publication title and year, number of citations and average citations, type of study, collaborations, and key words. The data were analyzed using SPSS version 19.0 (IBM Corp, Armonk, NY) and VOS viewer software (version 1.6.7; Leiden University Center for Science and Technology Studies, Leiden, Netherlands).

RESULTS

Among the 100 top cited articles, the highest number of citations that an article received was 309. The top cited articles appeared in 14 different journals, and the Journal of Endodontics published the greatest number of these articles (66%). The majority of articles were published in the year 2014 (n = 17). The majority of articles originated from the United States (n = 51) with the most contribution from The University of Texas Health Science Center, San Antonio, TX. The most frequent first authors were Torabinejad (n = 4), Nosrat (n = 3), and Thibodeau (n = 3). In vitro studies were the most common study design (n = 29) followed by reviews (n = 21). "Regenerative endodontics" was the most frequently used key word.

CONCLUSIONS

This bibliometric analysis reveals the progress and trend of research in the field of regenerative endodontics. The in vitro articles published in the field of regenerative endodontics had the highest number of citations and average citation rates.

Growth Factors and Cell Homing in Dental Tissue Regeneration

Purpose of Review

To summarize current views on the role and therapeutic potential of growth factors (GFs) within endodontic cell homing.

Recent Findings

Cell homing/revitalization techniques aim to regenerate dentin and pulp using endogenous cells. Clinically, revitalization has successfully created new vital tissue in necrotic permanent teeth with an open apex; however, there is no evidence of new odontoblasts, pulp tissue, or predictable extension in root length. Although the response is reparative rather than regenerative, exciting opportunities to improve these biologically-based strategies remain by (1) efficiently sequestering dentin-matrix-components (DMCs) using irrigants and dental materials (2) designing next-generation GF-releasing scaffold materials and (3) utilizing other sources of GF such as cells and plasma-rich plasma and plasma-rich fibrin.

Summary

GFs can promote reparative-dentinogenesis and pulp-like tissue formation. The future development and clinical approval of GF-functionalized-scaffolds is a priority; however, current focus should be to harness DMCs and target the interaction of stem cells and GFs.