Mucoadhesive Drug Delivery Systems

Hydrogel-Nanolipid Formulations for the Complex Anti-Inflammatory and Antimicrobial Therapy of Periodontitis

Objectives: This study aimed to develop and evaluate nanostructured lipid carriers (NLCs) loaded with meloxicam (Melox) and a therapeutic antibacterial and anti-inflammatory liquid lipid, clove oil (CO) for periodontitis treatment, a complex inflammatory condition necessitating advanced drug delivery systems. The NLC-Melox formulation was integrated into three hydrogels, hypromellose (HPMC), zinc hyaluronate (ZnHA), and sodium hyaluronate (NaHA), to conduct a comparative analysis focusing on enhanced localized drug delivery, improved mucoadhesion, prolonged retention, and significant therapeutic outcomes. Methods: NLC-Melox was prepared by homogenization and characterized by dynamic light scattering (DLS). Subsequently, NLC-Melox-loaded gels were subjected to transmission electron microscopy (TEM), differential scanning calorimetry (DSC), X-ray diffraction (XRD), Raman spectroscopy, and rheological analysis. In vitro drug release, anti-inflammatory activity (BSA denaturation assay), and antibacterial efficacy (MIC, MBC) were investigated to assess therapeutic potential. Results: DLS revealed a particle size of 183 nm with a polydispersity index of 0.26, indicating homogeneity. TEM confirmed consistent morphology and uniform nanoparticle distribution. DSC and XRD demonstrated the amorphous nature of Melox, enhancing solubility and stability. Spectroscopy confirmed no chemical interactions between components. Rheological studies identified ZnHA as the most mucoadhesive and structurally stable gel. In vitro release studies showed sustained drug release over 24 h. Melox and CO-loaded formulations demonstrated significant anti-inflammatory activity and notable antibacterial efficacy due to the antibacterial oil. Conclusions: The study highlighted the potential of NLC-based mucoadhesive hydrogels as an effective strategy for periodontitis treatment. The formulation offered improved drug solubility, therapeutic efficacy, mucoadhesivity, and prolonged delivery, making it a promising candidate for localized therapy.

Revisited and innovative perspectives of oral ulcer: from biological specificity to local treatment

Mouth ulcers, a highly prevalent ailment affecting the oral mucosa, leading to pain and discomfort, significantly impacting the patient's daily life. The development of innovative approaches for oral ulcer treatment is of great importance. Moreover, a deeper and more comprehensive understanding of mouth ulcers will facilitate the development of innovative therapeutic strategies. The oral environment possesses distinct traits as it serves as the gateway to the digestive and respiratory systems. The permeability of various epithelial layers can influence drug absorption. Moreover, oral mucosal injuries exhibit distinct healing patterns compared to cutaneous lesions, influenced by various inherent and extrinsic factors. Furthermore, the moist and dynamic oral environment, influenced by saliva and daily physiological functions like chewing and speaking, presents additional challenges in local therapy. Also, suitable mucosal adhesion materials are crucial to alleviate pain and promote healing process. To this end, the review comprehensively examines the anatomical and structural aspects of the oral cavity, elucidates the healing mechanisms of oral ulcers, explores the factors contributing to scar-free healing in the oral mucosa, and investigates the application of mucosal adhesive materials as drug delivery systems. This endeavor seeks to offer novel insights and perspectives for the treatment of oral ulcers.

Oral delivery of RNAi for cancer therapy

Cancer is a major health concern worldwide and is still in a continuous surge of seeking for effective treatments. Since the discovery of RNAi and their mechanism of action, it has shown promises in targeted therapy for various diseases including cancer. The ability of RNAi to selectively silence the carcinogenic gene makes them ideal as cancer therapeutics. Oral delivery is the ideal route of administration of drug administration because of its patients' compliance and convenience. However, orally administered RNAi, for instance, siRNA, must cross various extracellular and intracellular biological barriers before it reaches the site of action. It is very challenging and important to keep the siRNA stable until they reach to the targeted site. Harsh pH, thick mucus layer, and nuclease enzyme prevent siRNA to diffuse through the intestinal wall and thereby induce a therapeutic effect. After entering the cell, siRNA is subjected to lysosomal degradation. Over the years, various approaches have been taken into consideration to overcome these challenges for oral RNAi delivery. Therefore, understanding the challenges and recent development is crucial to offer a novel and advanced approach for oral RNAi delivery. Herein, we have summarized the delivery strategies for oral delivery RNAi and recent advancement towards the preclinical stages.

Photocatalytic and Photothermal Antimicrobial Mussel-Inspired Nanocomposites for Biomedical Applications

Bacterial infection has traditionally been treated with antibiotics, but their overuse is leading to the development of antibiotic resistance. This may be mitigated by alternative approaches to prevent or treat bacterial infections without utilization of antibiotics. Among the alternatives is the use of photo-responsive antimicrobial nanoparticles and/or nanocomposites, which present unique properties activated by light. In this study, we explored the combined use of titanium oxide and polydopamine to create nanoparticles with photocatalytic and photothermal antibacterial properties triggered by visible or near-infrared light. Furthermore, as a proof-of-concept, these photo-responsive nanoparticles were combined with mussel-inspired catechol-modified hyaluronic acid hydrogels to form novel light-driven antibacterial nanocomposites. The materials were challenged with models of Gram-negative and Gram-positive bacteria. For visible light, the average percentage killed (PK) was 94.6 for E. coli and 92.3 for S. aureus. For near-infrared light, PK for E. coli reported 52.8 and 99.2 for S. aureus. These results confirm the exciting potential of these nanocomposites to prevent the development of antibiotic resistance and also to open the door for further studies to optimize their composition in order to increase their bactericidal efficacy for biomedical applications.

Repurposing Disulfiram as an Antifungal Agent: Development of a New Disulfiram Vaginal Mucoadhesive Gel

Alternative formulations need to be developed to improve the efficacy of treatments administered via the vaginal route. Mucoadhesive gels with disulfiram, a molecule that was originally approved as an antialcoholism drug, offer an attractive alternative to treat vaginal candidiasis. The aim of the current study was to develop and optimize a mucoadhesive drug delivery system for the local administration of disulfiram. Such formulations were composed of polyethylene glycol and carrageenan to improve the mucoadhesive and mechanical properties and to prolong the residence time in the vaginal cavity. Microdilution susceptibility testing showed that these gels had antifungal activity against Candida albicans, Candida parapsilosis, and Nakaseomyces glabratus. The physicochemical properties of the gels were characterized, and the in vitro release and permeation profiles were investigated with vertical diffusion Franz cells. After quantification, it was determined that the amount of the drug retained in the pig vaginal epithelium was sufficient to treat candidiasis infection. Together, our findings suggest that mucoadhesive disulfiram gels have the potential to be an effective alternative treatment for vaginal candidiasis.

Mucoadhesive drug delivery systems: a promising non-invasive approach to bioavailability enhancement. Part I: biophysical considerations

INTRODUCTION

Mucoadhesive drug delivery systems (MDDS) are specifically designed to interact and bind to the mucosal layer for localized, prolonged, and/or targeted drug delivery. Over the past 4 decades, different sites have been explored for mucoadhesion including the nasal, oral, and vaginal cavities, the gastrointestinal tract and ocular tissues.

AREAS COVERED

The present review aims to provide a comprehensive understanding of different aspects of MDDS development. Part I focuses on the anatomical and biological aspects of mucoadhesion, which include a detailed elucidation of the structure and anatomy of the mucosa, the properties of mucin, the different theories of mucoadhesion and evaluation techniques.

EXPERT OPINION

The mucosal layer presents a unique opportunity for effective localization as well as systemic drug delivery via MDDS. Formulation of MDDS requires a thorough understanding of the anatomy of mucus tissue, the rate of mucus secretion and turnover, and the physicochemical properties of mucus. Further, the moisture content and the hydration of polymers are crucial for interaction with mucus. A confluence of different theories used to explain the mechanism of mucoadhesion is useful for understanding the mucoadhesion of different MDDS and their evaluation is subject to factors, such as the site of administration, type of dosage form, and duration of action. [Figure: see text].

Microenvironmental pH Modification in Buccal/Sublingual Dosage Forms for Systemic Drug Delivery

Many drug candidates are poorly water-soluble. Microenvironmental pH (pH_M) modification in buccal/sublingual dosage forms has attracted increasing interest as a promising pharmaceutical strategy to enhance the oral mucosal absorption of drugs with pH-dependent solubility. Optimizing drug absorption at the oral mucosa using pH_M modification is considered to be a compromise between drug solubility and drug lipophilicity (Log D)/permeation. To create a desired pH_M around formulations during the dissolution process, a suitable amount of pH modifiers should be added in the formulations, and the appropriate methods of pH_M measurement are required. Despite pH_M modification having been demonstrated to be effective in enhancing the oral mucosal absorption of drugs, some potential risks, such as oral mucosal irritation and teeth erosion caused by the pH modifiers, should not been neglected during the formulation design process. This review aims to provide a short introduction to the pH_M modification concept in buccal/sublingual dosage forms, the properties of saliva related to pH_M modification, as well as suitable drug candidates and pH modifiers for pH_M modifying buccal/sublingual formulations. Additionally, the methods of pH_M measurement, pH_M modification methods and the corresponding challenges are summarized in the present review.

Bio-Inspired Muco-Adhesive Polymers for Drug Delivery Applications

Muco-adhesive drug delivery systems continue to be one of the most studied for controlled pharmacokinetics and pharmacodynamics. Briefly, muco-adhesive polymers, can be described as bio-polymers that adhere to the mucosal (mucus) surface layer, for an extended residency period of time at the site of application, by the help of interfacial forces resulting in improved drug delivery. When compared to traditional drug delivery systems, muco-adhesive carriers have the potential to enhance therapeutic performance and efficacy, locally and systematically, in oral, rectal, vaginal, amongst other routes. Yet, the achieving successful muco-adhesion in a novel polymeric drug delivery solution is a complex process involving key physico-chemico-mechanical parameters such as adsorption, wettability, polymer chain length, inter-penetration and cross-linking, to list a few. Hence, and in light of accruing progress, evidence and interest, during the last decade, this review aims to provide the reader with an overview of the theories, principles, properties, and underlying mechanisms of muco-adhesive polymers for pharmaceutics; from basics to design to characterization to optimization to evaluation to market. A special focus is devoted to recent advances incorporating bio-inspired polymers for designing controlled muco-adhesive drug delivery systems.

Utilization of propranolol hydrochloride mucoadhesive invasomes as a locally acting contraceptive: in-vitro, ex-vivo, and in-vivo evaluation

It was found that propranolol hydrochloride (PNL), which is a beta-blocker used for hypertension treatment, has a potent spermicidal activity through local anesthetic activity or beta-blocking effect on sperm cells subsequently it could be used as a contraceptive remedy. This study aimed to entrap PNL into invasomes (INVs) and then formulate it as a locally acting contraceptive gel. PNL-loaded mucoadhesive INVs were prepared via the thin-film hydration technique. The D-optimal design was utilized to fabricate INVs employing lipid concentration (X₁), terpenes concentration (X₂), terpenes type (X₃), and chitosan concentration (X₄) as independent variables, while their impact was observed for entrapment efficiency percent (Y₁; EE%), particle size (Y₂; PS), zeta potential (Y₃; ZP), and amount of drug released after 6 h (Y₄; Q6h). Design Expert® was bestowed to nominate the desired formula. The selected INV was subjected to further studies and formulated into a mucoadhesive gel for ex-vivo and in-vivo investigations. The optimum INV showed a spherical shape with EE% of 65.01 ± 1.24%, PS of 243.75 ± 8.13 nm, PDI of 0.203 ± 0.01, ZP of 49.80 ± 0.42 mV, and Q6h of 53.16 ± 0.73%. Differential scanning calorimetry study asserted the capability of INVs to entrap PNL. Permeation studies confirmed the desired sustained effect of PNL-loaded INVs-gel compared to PNL-gel, INVs, and PNL solution. Sperm motility assay proved the potency of INVs-gel to inhibit sperm motility. Besides, the histopathological investigation verified the tolerability of the prepared INVs-gel. Taken together, the gained data justified the efficacy of PNL-loaded INVs-gel as a potential locally acting contraceptive.

Mucoadhesive carriers for oral drug delivery

Among the various dosage forms, oral medicine has extensive benefits including ease of administration and patients' compliance, over injectable, suppositories, ocular and nasal. Despite of extensive demand and emerging advantages, over 50% of therapeutic molecules are not available in oral form due to their physicochemical properties. More importantly, most of the biologics, proteins, peptide, and large molecular drugs are mostly available in injectable form. Conventional oral drug delivery system has limitation such as degradation and lack of stability within stomach due to presence of highly acidic gastric fluid, hinders their therapeutic efficacy and demand more frequent and higher dosing. Hence, formulation for controlled, sustained, and targeted drug delivery, need to be designed with feasibility to target the specific region of gastrointestinal (GI) tract such as stomach, small intestine, intestine lymphatic, and colon is challenging. Among various oral delivery approaches, mucoadhesive vehicles are promising and has potential for improving oral drug retention and controlled absorption to treat local diseases within the GI tract, as well systemic diseases. This review provides the overview about the challenges and opportunities to design mucoadhesive formulation for oral delivery of therapeutics in a way to target the specific region of the GI tract. Finally, we have concluded with future perspective and potential of mucoadhesive formulations for oral local and systemic delivery.

Eudragit® L100/Polyvinyl Alcohol Nanoparticles Impregnated Mucoadhesive Films as Ocular Inserts for Controlled Delivery of Erythromycin: Development, Characterization and In Vivo Evaluation

The fast elimination of drugs from the cornea is one of many challenges associated with the topical administration of conventional dosage forms. The present manuscript aimed to prepare modified-release inserts containing erythromycin (ERY) to enhance drug delivery and address the aforementioned limitation. Film formulations were developed using Eudragit^® L100 (EUD) and Polyvinyl Alcohol (PVA) polymers. ERY-loaded EUD-based nanoparticles were developed by the colloidal dispersion method using PVA as the emulsifier. The film-casting method was applied to form the mucoadhesive films using sodium alginate, gelatin, cyclodextrin-α, and β as polymeric film matrices. Different physicochemical properties of the optimized formulations and in vitro release profiles were evaluated. The in vivo evaluation was performed by collecting tear samples of rabbits using a novel, non-invasive method following the administration of inserts in the cul-de-sac. The ERY amount was assayed using a microbiological assay. The developed films showed prolonged in vitro and in vivo release profiles over five to six days; they had suitable physicochemical properties and a tensile strength of 2–3 MPa. All formulations exhibited antibacterial efficacy against E. coli and S. aureus with more than 20 mm diameter of inhibited growth zones. None of the formulations caused irritation to the rabbit’s eye. The inserts showed promising pharmacokinetics with AUC_0–120 of 30,000–36,000 µg·h/mL, a C_max of more than 1800 µg/mL at 4 h, and maintained drug concentration over the threshold of 5 µg/mL during the following 120 h of study. Nanoparticle-containing, mucoadhesive films could be fabricated as ocular inserts and can prolong the topical ocular delivery of ERY.

Polydopamine nanoparticles and hyaluronic acid hydrogels for mussel-inspired tissue adhesive nanocomposites

Bioadhesives are intended to facilitate the fast and efficient reconnection of tissues to restore their functionality after surgery or injury. The use of mussel-inspired hydrogel systems containing pendant catechol moieties is promising for tissue attachment under wet conditions. However, the adhesion strength is not yet ideal. One way to overcome these limitations is to add polymeric nanoparticles to create nanocomposites with improved adhesion characteristics. To further enhance adhesiveness, polydopamine nanoparticles with controlled size prepared using an optimized process, were combined with a mussel-inspired hyaluronic acid (HA) hydrogel to form a nanocomposite. The effects of sizes and concentrations of polydopamine nanoparticles on the adhesive profiles of mussel-inspired HA hydrogels were investigated. Results show that the inclusion of polydopamine nanoparticles in nanocomposites increased adhesion strength, as compared to the addition of poly (lactic-co-glycolic acid) (PLGA), and PLGA-(N-hydroxysuccinimide) (PLGA-NHS) nanoparticles. A nanocomposite with demonstrated cytocompatibility and an optimal lap shear strength (47 ± 3 kPa) was achieved by combining polydopamine nanoparticles of 200 nm (12.5% w/v) with a HA hydrogel (40% w/v). This nanocomposite adhesive shows its potential as a tissue glue for biomedical applications.

Mucoadhesive and Rheological Studies on the Co-Hydrogel Systems of Poly(Ethylene Glycol) Copolymers with Fluoroalkyl and Poly(Acrylic Acid)

A self-assembled co-hydrogel system with sol-gel two-phase coexistence and mucoadhesive properties was developed based on the combined properties of fluoroalkyl double-ended poly(ethylene glycol) (R_f-PEG-R_f) and poly(acrylic acid) (PAA), respectively. We have synthesized an R_f-PEG-g-PAA (where g denotes grafted) copolymer and integrated it into the R_f-PEG-R_f physically cross-linked micellar network to form a co-hydrogel system. Tensile strengths between the co-hydrogel surfaces and two different sets of mucosal surfaces were acquired. One mucosal surface was made of porcine stomach mucin Type II, while the other one is a pig small intestine. The experimental results show that the largest maximum detachment stresses (MDSs) were obtained when the R_f-PEG-g-PAA’s weight percent in the dehydrated polymer mixture is ~15%. Tensile experiments also found that MDSs are greater in acidic conditions (pH = 4–5) (123.3 g/cm² for the artificial mucus, and 43.0 g/cm² for pig small intestine) and basic conditions (pH = 10.6) (126.9 g/cm², and 44.6 g.cm², respectively) than in neutral pH (45.4 g/cm², and 30.7 g.cm², respectively). Results of the rheological analyses using shear strain amplitude sweep and frequency sweep reveal that the R_f-PEG-g-PAA was physically integrated into the R_f-PEG-R_f micellar network, and the co-hydrogels remain physically cross-linked in three-dimensional micellar networks with long-term physical dispersion stability. Therefore, the co-hydrogel system is promising for drug delivery applications on mucosal surfaces.

Multifaceted Design and Emerging Applications of Tissue Adhesives

Tissue adhesives can form appreciable adhesion with tissues and have found clinical use in a variety of medical settings such as wound closure, surgical sealants, regenerative medicine, and device attachment. The advantages of tissue adhesives include ease of implementation, rapid application, mitigation of tissue damage, and compatibility with minimally invasive procedures. The field of tissue adhesives is rapidly evolving, leading to tissue adhesives with superior mechanical properties and advanced functionality. Such adhesives enable new applications ranging from mobile health to cancer treatment. To provide guidelines for the rational design of tissue adhesives, here, existing strategies for tissue adhesives are synthesized into a multifaceted design, which comprises three design elements: the tissue, the adhesive surface, and the adhesive matrix. The mechanical, chemical, and biological considerations associated with each design element are reviewed. Throughout the report, the limitations of existing tissue adhesives and immediate opportunities for improvement are discussed. The recent progress of tissue adhesives in topical and implantable applications is highlighted, and then future directions toward next-generation tissue adhesives are outlined. The development of tissue adhesives will fuse disciplines and make broad impacts in engineering and medicine.

Synergistic Photoantimicrobial Chemotherapy of Methylene Blue-Encapsulated Chitosan on Biofilm-Contaminated Titanium

Intensive efforts have been made to eliminate or substantial reduce bacterial adhesion and biofilm formation on titanium implants. However, in the management of peri-implantitis, the methylene blue (MB) photosensitizer commonly used in photoantimicrobial chemotherapy (PACT) is limited to a low retention on the implant surface. The purpose of this study was to assess enhancive effect of water-soluble quaternary ammonium chitosan (QTS) on MB retention on biofilm-infected SLA (sandblasted, large grid, and acid-etched) Ti alloy surfaces in vitro. The effectiveness of QTS + MB with different concentrations in eliminating Gram-negative A. actinomycetemcomitans or Gram-positive S. mutans bacteria was compared before and after PACT. Bacterial counting and lipopolysaccharide (LPS) detection were examined, and then the growth of human osteoblast-like MG63 cells was evaluated. The results indicated that the synergistic QTS + MB with retention ability significantly decreased the biofilm accumulation on the Ti alloy surface, which was better than the same concentration of 1 wt% methyl cellulose (MC). More importantly, the osteogenic activity of MG63 cells on the disinfected sample treated by QTS + MB-PACT modality was comparable to that of sterile Ti control, significantly higher than that by MC + MB-PACT modality. It is concluded that, in terms of improved retention efficacy, effective bacteria eradication, and enhanced cell growth, synergistically, PACT using the 100 μg/mL MB-encapsulated 1% QTS was a promising modality for the treatment of peri-implantitis.

Thermosensitive hydrogels for vaginal delivery of secnidazole as an approach to overcome the systemic side-effects of oral preparations

Secnidazole (SEC) has been suggested as an alternative agent against Trichomonas vaginalis to overcome the adverse effects, antimicrobial resistance problems and poor adherence to the currently available therapy. Once no topical formulation may be found in the market until now, SEC was incorporated in thermosensitive bioadhesive systems to extend the contact time in the mucosa and to avoid a systemic drug disposition. Formulations containing 20% poloxamer 407, 1% poloxamer 188 and 1 or 2.5% chitosan showed suitable sol-gel transition temperature (> 30 °C), presenting a fast gelation time (100-115 s). Rheological, dynamic light scattering and infrared spectroscopy analysis suggested molecular interactions among polymers. Chitosan increased the mucoadhesion strength of the formulations. In addition, hydrogels showed a tendency to decrease the drug transport rate through mucosa when compared to the control. Mucin was also added onto mucosa for a more realistic simulation of permeability/retention. In the presence of this agent, hydrogels containing chitosan reduced the permeability/retention of the drug in approximately 2.0-fold when compared to the control. Therefore, the hydrogels presented suitable characteristics to remain in the vaginal environment, which would result in effective local treatment of trichomoniasis.

Road From Nose to Brain for Treatment of Alzheimer: The Bumps and Humps

Vulnerability of the brain milieu to even the subtle changes in its normal physiology is guarded by a highly efficient blood brain barrier. A number of factors i.e. molecular weight of the drug, its route of administration, lipophilic character, etc. play a significant role in its sojourn through the Blood Brain Barrier (BBB) and limit the movement of drug into brain tissue through BBB. To overcome these problems, alternative routes of drug administration have been explored to target the drugs to brain tissue. Nasal route has been widely reported for the administration of drugs for treatment of Alzheimer. In this innovative approach, the challenge of BBB is bypassed. Through this route, both the larger as well as polar molecules can be made to reach the brain tissues. Generally, these systems are either pH dependent or temperature dependent. The present review highlights the anatomy of nose, mechanisms of drug delivery from nose to brain, critical factors in the formulation of nasal drug delivery system, nasal formulations of various drugs that have been tried for their nasal delivery for treatment of Alzheimer. It also dives deep to understand the factors that contribute to the success of such formulations to carve out a direction for this niche area to be explored further.

Formulating SLN and NLC as Innovative Drug Delivery Systems for Non-Invasive Routes of Drug Administration

Colloidal carriers diverge depending on their composition, ability to incorporate drugs and applicability, but the common feature is the small average particle size. Among the carriers with the potential nanostructured drug delivery application there are SLN and NLC. These nanostructured systems consist of complex lipids and highly purified mixtures of glycerides having varying particle size. Also, these systems have shown physical stability, protection capacity of unstable drugs, release control ability, excellent tolerability, possibility of vectorization, and no reported production problems related to large-scale. Several production procedures can be applied to achieve high association efficiency between the bioactive and the carrier, depending on the physicochemical properties of both, as well as on the production procedure applied. The whole set of unique advantages such as enhanced drug loading capacity, prevention of drug expulsion, leads to more flexibility for modulation of drug release and makes Lipid-based nanocarriers (LNCs) versatile delivery system for various routes of administration. The route of administration has a significant impact on the therapeutic outcome of a drug. Thus, the non-invasive routes, which were of minor importance as parts of drug delivery in the past, have assumed added importance drugs, proteins, peptides and biopharmaceuticals drug delivery and these include nasal, buccal, vaginal and transdermal routes. The objective of this paper is to present the state of the art concerning the application of the lipid nanocarriers designated for non-invasive routes of administration. In this manner, this review presents an innovative technological platform to develop nanostructured delivery systems with great versatility of application in non-invasive routes of administration and targeting drug release.

Development of in situ gel containing asiaticoside/cyclodextrin complexes. Evaluation in culture human periodontal ligament cells (HPLDCs)

Asiaticoside (AS), an active herbal compound isolated from Centella asiatica, has the potential benefit in promoting type I collagen (COL I) synthesis and osteogenic differentiation in human periodontal ligament cells (HPDLCs). However, it has low aqueous solubility which may hamper the bioavailability. Thus, the aim of this study was to develop thermoresponsive in situ gel containing AS/cyclodextrin (CD) complexes. The non-encapsulated formulations consisted of AS/hydroxypropyl β-CD (HPβCD) complexes and encapsulated formulations containing AS loaded sulfobutylether β-CD/chitosan nanoparticles (SBEβCD/CS NPs) were prepared. The appearance, pH and viscosity of all formulations were within the acceptable range. All formulations formed relatively rapid sol-to-gel transition when contacted with simulated salivary fluid at body temperature. Compared to non-encapsulated formulations, in vitro gelation and rheological studies of encapsulated formulations displayed gel formation that remained longer with high mechanical strength. In vitro mucoadhesion and in vitro release studies revealed that nanoencapsulated in situ gel had excellent mucoadhesive property and could release AS in a sustained manner. These formulations exhibited no cytotoxic effects to HPDCLs. The SBEβCD/CS NPs containing low AS content could express the COL I synthesis. Thus, nanoencapsulated platform could serve as a promising carrier to deliver AS for periodontal tissue regeneration.

Highlighting the impact of chitosan on the development of gastroretentive drug delivery systems

The development of gastroretentive systems have been growing lately due to the high demand for carriers that increase drug bioavailability and therapeutic effectiveness after oral administration. Most of systems reported up to now are based on chitosan (CS) due to its peculiar properties, such as cationic nature, biodegradability, biocompatibility and important mucoadhesiveness, which make CS a promising biopolymer to design effective gastroretentive systems. In light of this, we reported in this review the CS versatility to fabricate different types of nano- and microstructured gastroretentive systems. For a better understanding of the gastric retention mechanisms, we highlighted expandable, density-based, magnetic, mucoadhesive and superporous systems. The biological and chemical properties of CS, anatomophysiological aspects related to gastrointestinal tract (GIT) and some applications of these systems are also described here. Overall, this review may assist researchers to explore new strategies to design safe and efficient gastroretentive systems in order to popularize them in the treatment of diseases and clinical practices.

Mussel-inspired bioadhesives in healthcare: design parameters, current trends, and future perspectives

Mussels are well-known for their extraordinary capacity to adhere onto different surfaces in various hydrophillic conditions. Their unique adhesion ability under water or in wet conditions has generated considerable interest towards developing mussel inspired polymeric systems that can mimic the chemical mechanisms used by mussels for their adhesive properties. Catechols like 3,4-dihydroxy phenylalanine (DOPA) and their biochemical interactions have been largely implicated in mussels' strong adhesion to various substrates and have been the centerpoint of research and development efforts towards creating superior tissue adhesives for surgical and tissue engineering applications. In this article, we review bioadhesion and adhesives from an engineering standpoint, specifically the requirements of a good tissue glue, the relevance that DOPA and other catechols have in tissue adhesion, current trends in mussel-inspired bioadhesives, strategies to develop mussel-inspired tissue glues, and perspectives for future development of these materials.

Mucoadhesive Multiparticulate Drug Delivery Systems: An Extensive Review of Patents

Innovations in pharmaceutical research are striving for designing newer drug therapies to eradicate deadly diseases. Strategies for such inventions always flourish with keys and objectives of minimal adverse effects and effective treatment. Recent trends in pharmaceutical technology specify that mucoadhesive drug delivery system is particularly appropriate than oral control release, for getting local systematic delivery of drugs in GIT for an extended interval of time at a predetermined rate. However, it is somehow expensive and unpleasant sensation for some patients, but still it is needful for getting short enzymatic activity, simple administration without pain and evasion of fast pass metabolism. Usually the vehicles employed in drug delivery of mucoadhesive system have a significant impact that draws further attention to potential benefits like improved bioavailability of therapeutic agents, extensive drug residence time at the site of administration and a comparatively faster drug uptake into the systemic circulation. The drug release from mucoadhesive multiparticulates is contingent on several types of factors comprising carrier need to produce the multiparticles and quantity of medication drug contained in them. Mucoadhesion is characterized by selected theories and mechanisms. Various strategies emergent in mucoadhesive multiparticulate drug delivery system (MMDDS) by in-vitro as well as ex-vivo description and characterization are also critically discussed. Apart from these, the primary focus during this review is to highlight current patents, clinical status, and regulatory policy for enhancement of mucoadhesive multi-particulate drug delivery system in the present scenario.

Metal-organic frameworks, NH2-MIL-88(Fe), as carriers for ophthalmic delivery of brimonidine

We have proposed a metal-organic framework (MOF), NH₂-MIL-88(Fe), as a novel carrier for topical drug delivery to the eye. The NH₂-MIL-88(Fe) particles were prepared via a solvothermal synthesis method and their structure was confirmed by powder X-ray diffraction, Fourier transform infrared analysis, thermogravimetric analysis, electron microscopy, and N₂ adsorption-desorption measurements. When brimonidine, an anti-glaucoma medicine, was encapsulated into NH₂-MIL(Fe)-88 (i.e., NH₂-MIL-88(Fe)/Br), the drug was loaded at 121.3 µg/mg and released in a sustained manner for up to 12 h. The NH₂-MIL-88(Fe)/Br exhibited mucoadhesive properties and remained on rabbit eyes for a period of up to 4 h. Consequently, a high concentration of brimonidine was found in tears for a prolonged period after the administration of NH₂-MIL-88(Fe)/Br, which resulted in a greater than two-fold increase in drug bioavailability and activity period compared with those of Alphagan P, which are brimonidine eye drops already approved for clinical use. Hence, NH₂-MIL-88(Fe) is suggested to be a promising carrier for topical delivery to the eye that provides enhanced bioavailability of ocular drugs.

STATEMENT OF SIGNIFICANCE

We suggest NH₂-MIL(Fe)-88, a type of metal-organic frameworks (MOFs), as delivery carriers of an ophthalmic drug, brimonidine. The NH₂-MIL(Fe)-88 particles possess a mucoadhesive property, hence prolonged retention in the preocular space when topically administered to the eye. The particles can also encapsulate the drug in their micro-pores, through which the drug can be released in a sustained manner. Therefore, when tested to rabbit eyes in vivo, the drug-loaded NH₂-MIL(Fe)-88 particles were shown to enhance the ocular drug bioavailability, as compared with Alphagan P, the marketed eye drops of brimonidine.

Genetically Engineered Mucoadhesive Spider Silk

Mucoadhesion is defined as the adhesion of a material to the mucus gel covering the mucous membranes. The mechanisms controlling mucoadhesion include nonspecific electrostatic interactions and specific interactions between the materials and the mucins, the heavily glycosylated proteins that form the mucus gel. Mucoadhesive materials can be used to develop mucosal wound dressings and noninvasive transmucosal drug delivery systems. Spider silk, which is strong, biocompatible, biodegradable, nontoxic, and lightweight would serve as an excellent base for the development of such materials. Here, we investigated two variants of the partial spider silk protein 4RepCT genetically engineered in order to functionalize them with mucoadhesive properties. The pLys-4RepCT variant was functionalized with six cationically charged lysines, aiming to provide nonspecific adhesion from electrostatic interactions with the anionically charged mucins, while the hGal3-4RepCT variant was genetically fused with the Human Galectin-3 Carbohydrate Recognition Domain which specifically binds the mucin glycans Galβ1-3GlcNAc and Galβ1-4GlcNAc. First, we demonstrated that coatings, fibers, meshes, and foams can be readily made from both silk variants. Measured by the adsorption of both bovine submaxillary mucin and pig gastric mucin, the newly produced silk materials showed enhanced mucin binding properties compared with materials of wild-type (4RepCT) silk. Moreover, we showed that pLys-4RepCT silk coatings bind mucins through electrostatic interactions, while hGal3-4RepCT silk coatings bind mucins through specific glycan-protein interactions. We envision that the two new mucoadhesive silk variants pLys-4RepCT and hGal3-4RepCT, alone or combined with other biofunctional silk proteins, constitute useful new building blocks for a range of silk protein-based materials for mucosal treatments.

Acute Exposure to Commonly Ingested Emulsifiers Alters Intestinal Mucus Structure and Transport Properties

The consumption of generally regarded as safe emulsifiers has increased, and has been associated with an increased prevalence of inflammatory bowel and metabolic diseases, as well as an altered microbiome. The mucus barrier, which selectively controls the transport of particulates and microorganisms to the underlying epithelial layer, has been previously shown to be altered by dietary salts and lipids. However, the potential impact of emulsifiers on the protective mucus barrier, its permeability, and associated structural changes are not clear. In this study, we analyzed changes in the mucus barrier to both passively diffusing nanoparticles and actively swimming E. coli upon exposure to two emulsifiers, carboxymethylcellulose (CMC) and polysorbate 80 (Tween). When exposed to CMC, mucus pore size decreased, which resulted in significantly slower E. coli speed and particle diffusion rates through mucus. Tween exposure minimally impacted mucus microstructure and particle diffusion, but increased E. coli speed in mucus. Moreover, both emulsifiers appeared to alter mucus amount and thickness in rat intestinal tissue and mucus-producing cell cultures. These results indicate that acute exposure to emulsifiers impacts barrier and structural properties of intestinal mucus, modulating interactions between intestinal lumen contents, microbes, and underlying tissue, which may contribute to development of intestinal inflammation.

The role of mucus on drug transport and its potential to affect therapeutic outcomes

A layer of mucus covers the surface of all wet epithelia throughout the human body. Mucus is a hydrogel mainly composed of water, mucins (glycoproteins), DNA, proteins, lipids, and cell debris. This complex composition yields a tenacious viscoelastic hydrogel that lubricates and protects the exposed epithelia from external threats and enzymatic degradation. The natural protective role of mucus is nowadays acknowledged as a major barrier to be overcome in non-invasive drug delivery. The heterogeneity of mucus components offers a wide range of potential chemical interaction sites for macromolecules, while the mesh-like architecture given to mucus by the intermolecular cross-linking of mucin molecules results in a dense network that physically, and in a size-dependent manner, hinders the diffusion of nanoparticles through mucus. Consequently, drug diffusion, epithelial absorption, drug bioavailability, and ultimately therapeutic outcomes of mucosal drug delivery can be attenuated.

An overview of polymeric dosage forms in buccal drug delivery: State of art, design of formulations and their in vivo performance evaluation

Owing to the ease of the administration, the oral cavity is an attractive site for the delivery of drugs. The main difficulty for administration via the buccal route is an effective physiological removal mechanism of the oral cavity that takes way the formulation from the buccal site and decreases the bioavailability of drugs. The use of mucoadhesive polymers in buccal drug delivery shows assessing buccal drug permeation and absorption, however some studies bring an in vivo performance. This review points to the use of polymers in the manufacture of drug delivery systems (hydrogels, films and tablets) and shows the results of their in vivo performance tests.

Evaluation of the Safety, Cell Migration, and Mucoadhesive Properties of a Mucoadhesive Polymer Blend in Human Oral Mucosa

The efficacy of active pharmaceutical ingredients (API) in compounded medications for oral mucosa greatly depends on the composition of the base. Here, we assessed the safety, facilitation of cell migration, and mucoadhesive properties of a newly developed mucoadhesive polymer blend (MPB) which contains pullulan, tamarindus indica polysaccharide, and sodium hyaluronate. No cell death was observed when human oral keratinocyte (HOK) and fibroblast (HOrF) cells were exposed to 1% MPB for 24 h. Epithelial cells in a 3D buccal tissue model (EpiOral) were unaffected when exposed to 50% MPB for 20 h whereas 1% Triton X-100 killed 93% cells after 4.5 h. The expressions of cytokines IL1α and IL1β and cell proliferation markers PCNA, CYCLIN A, and CYCLIN D1 in EpiOral tissue did not increase suggesting that MPB is neither an irritant nor a mitogen. Markers of apoptosis such as cleavage of CASPASES 8/9, upregulation of pro-apoptosis NOXA protein, and downregulation of anti-apoptosis XIAP protein were observed in Triton X-100-treated cells but not in cells exposed to MPB. The migration of HOK and HOrF cells was stimulated by MPB, and the expression of E-CADHERIN in the EpiOral tissues was unaffected. Moreover, MPB showed stronger mucoadhesion on the human EpiOral tissue model compared with a reference product. We conclude that MPB can safely deliver API within the oral mucosa, facilitate cell migration, and may increase drug efficacy through its strong mucoadhesive property.

Smart polymers in drug delivery: a biological perspective

Key to the widespread application of smart polymers in drug delivery is understanding the mechanistic interplay, as well as consequence, of the presence of these macromolecules within living systems.

Recent progresses in bioadhesive microspheres via transmucosal administration

Based on the advantages of adhesion preparations and the application status of microspheres (MSs) in mucous delivery, this paper primarily reviews the bioadhesive MSs via transmucosal administration routes, including the mucosa in alimentary tract and other lumens. Particularly, the detailed researches about of celladhesive MSs and some new-style bioadhesive MSs are mentioned. Furthermore, this review attempts to reveal the advances of bioadhesive MSs as cell-selective bioadhesion systems and the stimuli-responsive MSs as location-specific drug delivery systems. Although these MSs show powerful strength, some far-sighted ideas should be brought on agendas. In the future, mechanisms should be put under tight scrutiny and more attention should be focused on the excellent bioadhesive materials and the 'second generation mucoadhesives'. Meaningful clinical applications of these novel MSs are also of current concerns and need more detailed researches.