Efficacy of methotrexate-loaded poly(ε-caprolactone) implants in Ehrlich solid tumor-bearing mice

Development of iron oxide based-upconversion nanocomposites for cancer therapeutics treatment

Administration of therapeutic strategies alongside magnetic multifunctional nanocomposites has displayed improved cancer prognosis. However, the clinical use of this combination is limited owing to poor bioimaging performance, low biocompatibility, restricted tissue penetration in ultraviolet/visible regions, and low therapeutic efficacy of nanocomposites. To overcome these existing challenges, we designed iron oxide (Fe3O4)-based upconversion nanoparticles (UCNPs). Fe3O4 nanoparticles were synthesized via facile solvothermal method and incorporated into mesoporous silica (mS) layer (Fe3O4@mS). Fe3O4@mS nanoparticles were further decorated onto the surface of the UCNPs as a core material (UCNP-Fe3O4@mS, FMUP). Methotrexate (MTX) an efficient anticancer drug was loaded onto the mesoporous silica to produce FMUP-MTX nanocomposite. The FMUP nanocomposite displayed excellent photothermal therapy and showed 43% photothermal conversion efficiency. The designed nanocomposite has ability to decompose H2O2 to generates hydroxyl radical that promote chemodynamic therapy effect due to attribution of Fenton reaction. FMUP-MTX nanocomposite possessed improved chemotherapeutic performance under NIR laser irradiation. Further, T2-weighted magnetic resonance imaging performance of nanocomposite was observed. In vitro studies shown that cell viability was decreased to 25% under laser irradiation due to the therapeutic effect. In vivo studies exhibited that the FMUP-MTX nanocomposite inhibited the tumor growth with the laser irradiation. Therefore, these nanocomposites can be considered as a promising candidate for cancer therapeutics treatment.

Microneedles with Implantable Tip-Accumulated Therapeutics for the Long-Term Management of Psoriasis

Methotrexate is successfully used as the gold standard for managing moderate-to-severe psoriasis. However, the low bioavailability and short half-life of the oral pills and the invasiveness of the parenteral injections make these suboptimal therapeutic options. Microneedles, bridging the advantages of the former forms, are successfully used to deliver methotrexate for different therapeutic purposes. However, the utilized dissolving microneedles demand frequent administration, potentially compromising patients' compliance. Additionally, the high toxicity of methotrexate prompts a quest for safer alternatives. Phloretin, a natural compound with confirmed antipsoriatic potential, emerges as a promising candidate. Herein, microneedle patches with separable, slow-degrading tips are developed for the sustained delivery of methotrexate and phloretin, as a comprehensive solution for long-term psoriasis management. Both compounds are individually loaded at varying doses and display sustained-release profiles. The developed microneedle patches demonstrate high mechanical strength, favorable drug delivery efficiency, and remarkable antipsoriatic potential both in vitro in keratinocytes and in vivo in a psoriasis mouse model. Comparative analysis with two subcutaneous injections reveals a similar antipsoriatic efficacy with a single patch of either compound, with prominent phloretin safety. Therefore, the developed patches present a superior alternative to methotrexate's current marketed forms and provide a viable alternative (phloretin) with comparable antipsoriatic efficacy and higher safety.

Methotrexate-Loaded Surface-Modified Solid Lipid Nanoparticles Targeting Cancer Expressing COX-2 Enzyme

Cancer is a major public health problem worldwide, and it is the second leading cause of death of humans in the world. The present study has been directed toward the preparation of methotrexate-loaded surface-modified solid lipid nanoparticles (SLNs) for potential use as a chemotherapeutic formulation for cancer therapy. A lipid (C14-AAP) derived from myristic acid (C14H30O2) and acetaminophen (AAP) was employed as a targeting ligand for human breast and lung cancer cells that overexpress the cyclooxygenases-2 (COX-2) enzyme. The SLNs consisting of stearic acid and C14-AAP were characterized by several methods, including dynamic light scattering (DLS), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), ultraviolet-visible (UV-vis) spectroscopy, high-resolution transmission electron microscopy (HRTEM), and field emission scanning electron microscopy (FESEM) techniques. An in vitro cell cytotoxicity study was done by carrying out an MTT assay and flow cytometry study in the human breast cancer (MCF7) and human lung cancer cell line (A549). The expression level of COX-2 enzyme in MCF7 and A549 cell lines was examined by reverse transcription polymerase chain reaction (RT-PCR). A high level of COX-2 expression was observed in both cell lines. In vitro cell cytotoxicity study in MC7 and A549 cell lines showed the surface-modified, methotrexate-loaded SLN is more effective in cell killing and induction of apoptotic death in both the cell lines than free methotrexate in MTT, flow cytometry, clonogenic assay, and Western blot studies. The surface-modified SLN was radiolabeled with 99mTc with %RCP greater than 95%. In vivo biodistribution study of the 99mTc-labeled SLN in melanoma tumor-bearing C57BL6 mice showed moderate tumor uptake of the radiotracer at 3 h post injection. The SPECT/CT image aligns with the biodistribution results. This study shows that AAP-modified SLNs could be a potential chemotherapeutic formulation for cancer therapy.

Impact of the crystal size of crystalline active pharmaceutical compounds on loading into microneedles

Microneedle (MN) technology offers a promising platform for the delivery of a wide variety of active pharmaceutical compounds into and/or through the skin. Yet, the low loading capacity of MNs limits their clinical translation. The solid state of loaded compounds, crystallinity versus amorphousness and crystal size of the former, could greatly affect their loading. Here, we investigated the effect of the crystal size of crystalline compounds on their loading into dissolving MNs, prepared using the solvent-casting technique. A model crystalline compound was subjected to crystal size reduction via wet bead milling and loaded into dissolving MNs. A range of crystal sizes, from micro to nano, was obtained via different milling periods. The obtained crystals were characterized for their size, morphology, and sedimentation behavior. Besides, their content, solid state inside the MNs, and impact on the MN mechanical strength were assessed. The crystals exhibited size-dependent sedimentation, which dramatically affected their loading inside the MNs. However, crystal size and sedimentation demonstrated a negligible effect on the mechanical strength and sharpness of the needles, hence no anticipated impact on the MNs' drug delivery efficiency. The elucidation of the correlation between the crystal size and MN loading opens new potentials to address a major drawback in MN technology.

Combination chemotherapy against colorectal cancer cells: Co-delivery of capecitabine and pioglitazone hydrochloride by polycaprolactone-polyethylene glycol carriers

BACKGROUND

Colorectal cancer causes numerous deaths despite many treatment options. Capecitabine (CAP) is the standard chemotherapy regimen for colorectal cancer, and pioglitazone hydrochloride (PGZ) for diabetic disease treatment. However, free drugs do not induce effective apoptosis. This work aims to co-encapsulate CAP and PGZ and evaluate cytotoxic and apoptotic effects on HCT-119, HT-29 colorectal cancer cells, and human umbilical vein endothelial cells (HUVECs).

METHOD

CAP, PGZ, and combination treatment nano-formulations were prepared by triblock (TB) (PCL-PEG-PCL) biodegradable copolymers to enhance drugs' bioavailability as anti-cancer agents. The Ultrasonic homogenization method was used for preparing nanoparticles. The physicochemical characteristics of nanoparticles were studied using 1H NMR, FTIR, DLS, and FESEM techniques. The zeta potential, entrapment efficiency, drug release, and storage stability were studied. Also, cell viability and apoptosis were examined by using MTT, acridine orange (AO), and propidium iodide (PI), respectively.

RESULT

The smaller hydrodynamic size (236.1 nm), polydispersity index (0.159), and zeta potential (-20.8 mV) were observed in nanoparticles. Nanoparticles revealed a proper formulation and storage stability at 25 °C than 4 °C in 90 days. The synergistic effect was observed in (CAP-PGZ)-loaded TB nanoparticles in HUVEC, HCT-116, and HT-29 cells. In (AO/PI) staining, the high percentage of apoptotic cells in the (CAP-PGZ)-loaded TB nanoparticles in HUVEC, HCT-116, and HT-29 were calculated as 78 %, 71.66 %, and 69.31 %, respectively.

CONCLUSION

The (CAP-PGZ)-loaded TB nanoparticles in this research offer an effective strategy for targeted combinational colorectal cancer therapy.

Poly-ε-Caprolactone Implants for Benznidazole Prolonged Release: An Alternative to Chagas Disease Oral Treatment

Benznidazole (BZ) tablets are the currently prescribed treatment for Chagas disease. However, BZ presents limited efficacy and a prolonged treatment regimen with dose-dependent side effects. The design and development of new BZ subcutaneous (SC) implants based on the biodegradable poly-ɛ-caprolactone (PCL) is proposed in this study for a controlled release of BZ and to improve patient compliance. The BZ–PCL implants were characterized by X-ray diffraction, differential scanning calorimetry, and scanning electron microscopy, which indicated that BZ remains in its crystalline state dispersed in the polymer matrix with no polymorphic transitions. BZ–PCL implants, even at the highest doses, induce no alteration of the levels of hepatic enzymes in treated animals. BZ release from implants to blood was monitored in plasma during and after treatment in healthy and infected animals. Implants at equivalent oral doses increase the body’s exposure to BZ in the first days compared with oral therapy, exhibiting a safe profile and allowing sustained BZ concentrations in plasma to induce a cure of all mice in the experimental model of acute infection by the Y strain of T. cruzi. BZ–PCL implants have the same efficacy as 40 daily oral doses of BZ. Biodegradable BZ implants are a promising option to reduce failures related to poor adherence to treatment, with more comfort for patients, and with sustained BZ plasma concentration in the blood. These results are relevant for optimizing human Chagas disease treatment regimens.

Development and Evaluation of a Novel Methotrexate-Loaded Electrospun Patch to Alleviate Psoriasis Plaques

OBJECTIVE

To achieve an effective topical formulation of Methotrexate (MTX) as a first-line treatment of psoriasis, we formulated three MTX-loaded electrospun nanofibrous patches composed of polycaprolactone (PCL), Eudragit L100, and a mixture of them.

SIGNIFICANCE

Topical delivery of MTX provides an appropriate therapeutic performance while circumventing the life-threatening side effects of systemic administration.

METHODS

Three MTX-loaded electrospun nanofibrous patches were prepared and characterized in terms of size and morphology (using SEM), thermal behavior (by TGA and DSC), and crystalline structure (using XRD). Furthermore, the wettability and mechanical strength of samples were investigated through water contact angle and tensile strength tests. Also, the encapsulation efficiency of MTX was calculated. Subsequently, in vitro drug release profile of each formulation was obtained and different kinetic models were fitted to achieve the best-matched model. Accordingly, the ex vivo skin permeation of MTX was studied for the optimum formulation.

RESULTS

All samples showed appropriate morphology, thermal behavior, and encapsulation efficiency. Also, XRD results showed that MTX is dispersed within the polymeric matrices in the amorphous state (with no crystalline region). Release studies demonstrated that MTX-loaded Eudragit L100-PCL formulation outperformed in terms of mechanical behavior and in vitro drug release. This formulation also exhibited better skin permeation.

CONCLUSION

The obtained controlled-release MTX-loaded electrospun patches seem promising to provide a long-acting topical treatment of psoriatic plaques with minimized systemic side effects.

An Oral 3D Printed PLGA-Tocopherol PEG Succinate Nanocomposite Hydrogel for High-Dose Methotrexate Delivery in Maintenance Chemotherapy

High-dose methotrexate (HDMTX) is one of the chemotherapeutic agents used to treat a variety of cancers in both adults and children. However, the toxicity associated with HDMTX has resulted in the spread of infections and treatment interruption. Further, poor bioavailability due to efflux pump activities mediated by P-glycoprotein has also been linked to poor therapeutic effects of methotrexate following oral administrations. D-α-Tocopheryl poly-ethylene glycol 1000 succinate (TPGS) is known to improve the bioavailability of poorly soluble drugs by inhibiting P-gp efflux activities, thus enhancing cellular uptake. Therefore, to achieve improved bioavailability for MTX, this study aimed to design and develop a novel drug delivery system employing TPGS and a biodegradable polymer, i.e., PLGA, to construct methotrexate-loaded nanoparticles fixated in alginate-gelatine 3D printable hydrogel ink to form a solid 3D printed tablet for oral delivery. The results indicated that high accuracy (>95%) of the 3D printed tablets was achieved using a 25 G needle. In vitro, drug release profiles were investigated at pH 1.2 and pH 7.4 to simulate the gastrointestinal environment. The in vitro release profile displayed a controlled and prolonged release of methotrexate over 24 h. The in silico modeling study displayed P-gp ATPase inhibition, suggesting enhanced MTX absorption from the gastrointestinal site. The 3D-printed hydrogel-based tablet has the potential to overcome the chemotherapeutic challenges that are experienced with conventional therapies.

Targeted Mitochondrial Fluorescence Imaging-Guided Tumor Antimetabolic Therapy with the Imprinted Polymer Nanomedicine Capable of Specifically Recognizing Dihydrofolate Reductase

As we all know, inhibiting the activity of dihydrofolate reductase (DHFR) has always been an effective strategy for folate antimetabolites to treat tumors. In the past, it mainly relied on chemical drugs. Here, we propose a new strategy, (3-propanecarboxyl)triphenylphosphonium bromide (CTPB)-modified molecularly imprinted polymer nanomedicine (MIP-CTPB). MIP-CTPB prepared by imprinting the active center of DHFR can specifically bind to the active center to block the catalytic activity of DHFR, thereby inhibiting the synthesis of DNA and ultimately inhibiting the tumor growth. The modification of CTPB allows the nanomedicine to be targeted and enriched in mitochondria, where DHFR is abundant. The confocal laser imaging results show that MIP-CTPB can target mitochondria. Cytotoxicity experiments show that MIP-CTPB inhibits HeLa cell proliferation by 42.2%. In vivo experiments show that the tumor volume of the MIP-CTPB-treated group is only one-sixth of that of the untreated group. The fluorescent and paramagnetic properties of the nanomedicine enable targeted fluorescence imaging of mitochondria and T2-weighted magnetic resonance imaging of tumors. This research not only opens up a new direction for the application of molecular imprinting, but also provides a new idea for tumor antimetabolic therapy guided by targeted mitochondrial imaging.

Graphene-based hybrid materials as promising scaffolds for peripheral nerve regeneration

Peripheral nerve injury (PNI) is a serious clinical health problem caused by the damage of peripheral nerves which results in neurological deficits and permanent disability. There are several factors that may cause PNI such as localized damage (car accident, trauma, electrical injury) and outbreak of the systemic diseases (autoimmune or diabetes). While various diagnostic procedures including X-ray, magnetic resonance imaging (MRI), as well as other type of examinations such as electromyography or nerve conduction studies have been efficiently developed, a full recovery in patients with PNI is in many cases deficient or incomplete. This is the reason why additional therapeutic strategies should be explored to favor a complete rehabilitation in order to get appropriate nerve injury regeneration. The use of biomaterials acting as scaffolds opens an interesting approach in regenerative medicine and tissue engineering applications due to their ability to guide the growth of new tissues, adhesion and proliferation of cells including the expression of bioactive signals. This review discusses the preparation and therapeutic strategies describing in vitro and in vivo experiments using graphene-based materials in the context of PNI and their ability to promote nerve tissue regeneration.

Preparation and characterization of a novel thermosensitive and bioadhesive cephalexin nanohydrogel: a promising platform for topical antibacterial delivery

OBJECTIVE

Impetigo is a common and highly contagious bacterial skin infection that mostly affects young children and infants. Herein, we report the development of a thermosensitive and bioadhesive in-situ hydrogel-forming system containing cephalexin-loaded nanoparticles (NPs) suitable for antibacterial drug delivery.

METHODS

The nanohydrogel was formulated using drug-loaded NPs and characterized by its physicochemical characteristics. Antibacterial activities of the cephalexin NPs and nanohydrogel were examined in vitro against Staphylococcus aureus (S. aureus). The ex vivo drug permeation study was performed using rat skin. Finally, this formulation was tested for in vivo antibacterial activity using superficial skin infections in rats.

RESULTS

The mean size and entrapment efficiency of the NPs were found to be 178 nm and 58%, respectively. The transmission electron microscopy analysis verified the formation of spherical NPs. The drug-loaded NPs showed an enhanced eradication effect against S. aureus according to the declined MIC values in comparison with the untreated drug. The ex vivo permeation profile of the cephalexin nanohydrogel showed a slow release pattern for 8 h. When applied on rat skin for 6 days, the nanohydrogel exhibited a superior antibacterial activity with normal hair growth and skin appearance as compared to the plain drug hydrogel.

CONCLUSIONS

These findings suggested that the nanohydrogel could serve as a valuable drug delivery platform against superficial bacterial infections.

Lipidic Liquid Crystalline Cubic Phases and Magnetocubosomes as Methotrexate Carriers

The release profiles of methotrexate, an anticancer drug, from the monoolein liquid crystalline cubic phases were studied. The cubic phases were used either in the form of a lipidic film deposited onto a glassy carbon electrode surface or in the dispersed form of magnetocubosomes, which are considered a prospective hybrid drug delivery system. Commonly, cubosomes or liposomes are employed, but not in the case of toxic methotrexate, known to block the receptors responsible for folate transport into the cells. The release profiles of the drug from the lipidic films were monitored electrochemically and described using the Higuchi model. They were also modified via changes in temperature; the release was faster, although it deviated from the model when the temperature was increased. Cubic phase nanoparticles (magnetocubosomes) containing hydrophobic magnetic nanoparticles placed in an alternating magnetic field of low frequency and amplitude, stimulated drug release from the suspension, which was monitored spectroscopically. These new biocompatible hybrid nanomaterials in the dispersed form allow to control the release of the drug at the appropriate sites, can be easily separated or relocated under external magnetic field and await further investigations of their in vitro cytotoxicity and in vivo biodistribution.

Enhanced antitumor efficacy of poly(D,L-lactide-co-glycolide)-based methotrexate-loaded implants on sarcoma 180 tumor-bearing mice

Purpose

Methotrexate is widely used in chemotherapy for a variety of malignancies. However, severe toxicity, poor pharmacokinetics, and narrow safety margin of methotrexate limit its clinical application. The aim of this study was to develop sustained-release methotrexate-loaded implants and evaluate antitumor activity of the implants after intratumoral implantation.

Materials and methods

We prepared the implants containing methotrexate, poly(D,L-lactide-co-glycolide), and polyethylene glycol 4000 with the melt-molding technique. The implants were characterized with regards to drug content, morphology, in vitro, and in vivo release profiles. Differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) were carried out to investigate the physicochemical properties of the implants. Furthermore, the antitumor activity of the implants was tested in a sarcoma 180 mouse model.

Results

The implants were prepared as solid rods. Scanning electron microscopy images showed a smooth surface of the implant, suggesting that methotrexate was homogeneously dispersed in the polymeric matrix. The results of DSC and FTIR indicated that no significant interaction between methotrexate and the polymer was observed in the implants. Both in vitro and in vivo release profiles of the implants were characterized by burst release followed by sustained release of methotrexate. Intratumoral implantation of methotrexate-loaded implants could efficiently delay tumor growth. Moreover, an increase in the dose of implants led to a higher tumor suppression rate without additional systemic toxicity.

Conclusion

These results demonstrate that methotrexate-loaded implants had significant antitumor efficacy in a sarcoma 180 mouse model without dose-limiting side effects, and suggest that the implants could be potentially applied as an intratumoral delivery system to treat cancer.

Cisplatin and paclitaxel co-delivered by folate-decorated lipid carriers for the treatment of head and neck cancer

CONTEXT

For head and neck cancer therapy, co-delivery of two drugs, cisplatin (DDP) plus paclitaxel (PTX), are more effective than single drug therapy. Lipid carriers are promising drug carriers for anti-cancer delivery.

OBJECTIVE

The aim of this study is to construct a folate (FA) decorated nanostructured lipid carriers (NLCs) as nanocarriers for DDP and PTX delivery.

MATERIALS AND METHODS

In this study, DDP and PTX were incorporated into NLCs. Folate-PEG-DSPE (FA-PEG-DSPE) was synthesized and decorated the drugs-loaded NLCs (FA-DDP/PTX NLCs). Their average size, zeta potential, drug encapsulation efficiency, drug loading capacity, and in vitro drug release were evaluated. Head and neck cancer cells (FaDu cells) were used for the testing of in vitro cytotoxicity, and in vivo transfection efficiency of NLC was evaluated on mice bearing FaDu cells model.

RESULTS

The size of FA-DDP/PTX NLCs was around 127 nm, with a positive zeta potential of 26.7 mV. FA-DDP/PTX NLCs showed the highest cytotoxicity and synergistic effect of two drugs in head and neck cancer cells (FaDu cells) in vitro. The in vivo study revealed the greatest anti-tumor activity than all the other formulations in murine-bearing head and neck cancer model.

DISCUSSION AND CONCLUSION

FA-DDP/PTX NLCs effectively improves anticancer efficiency for head and neck cancer in vitro and in vivo. The constructed NLCs could be used as a novel carrier to co-delivery DDP and PTX for head and neck cancer therapy.

Preparation and in vitro evaluation of 5-fluorouracil-loaded PCL nanoparticles for colon cancer treatment

Nanoparticles loaded with 5-fluorouracil (5-FU) for colon cancer therapies were prepared using the solvent evaporation technique, which involved lyophilization by freeze-drying. Formulations produced a substantially high encapsulation efficiency of approximately 93%. A positive correlation was seen when increasing polycaprolactone (PCL) and/or PVA concentrations and the size of nanoparticles produced. Increasing PCL concentration had a considerable influence on PDI while increasing PVA concentration had a lesser effect. All nanoparticles possessed a negative zeta potential, particularly in formulations with low polymer and polymer emulsifier concentrations. The formulation with the lowest PCL and PVA concentration was characterized by the most optimal properties; which accounts for the desirable delayed release profile of the active drug in dissolution testing indicating an improved targeting capability and enhanced bioavailability at the action site. Cytotoxicity studies showed that 5-FU loaded PCL nanoparticles had higher antiproliferative effect than free 5-FU on Caco-2 cell line (p < 0.05). The encouraging results obtained offer reasons for optimism regarding the future of 5-FU nanoparticles as a promising drug delivery system which could be further improved by including either enteric coating or encapsulating the nanoparticles onto microparticles to overcome unanticipated degradation.