Research progress on marine polysaccharide-based Pickering emulsions and their potential applications in the food industry

Recently, natural biopolymers have increasingly been utilized to stabilize Pickering emulsions (PEs) for food applications. The research and development of marine polysaccharides is one of the hotspots in the field of PEs due to their low-cost, non-toxicity, abundant, and sustainability. This review aims to provide a comprehensive overview of the latest advancements in marine polysaccharide-based stabilized PEs systems. We begin with an introduction to the sources of marine polysaccharides and the methods for fabricating marine polysaccharide-based PEs. Following this, we summarize the role of natural marine polysaccharides and their complexes (combined with other polysaccharides, proteins, polyphenols, fatty acids, or other particles) as particles to form and stabilize PEs. Additionally, we detail the current applications of marine polysaccharide-based PEs in food packaging films/coatings, 3D printing, encapsulation and delivery of functional food ingredients, as well as in fat substitutes. Finally, potential future developments of PEs stabilized by marine polysaccharides in the food industry are also proposed. This review will provide valuable references to promote the application of marine polysaccharide-based PEs in the food sector.

Development and Evaluation of Oromucosal Spray Formulation Containing Plant-Derived Compounds for the Treatment of Infectious and Inflammatory Diseases of the Oral Cavity

According to data in the literature, natural products and essential oils are often used in dental practice. To develop a new oromucosal spray for the treatment of infectious and inflammatory diseases of the oral cavity, clove CO2 extract and essential oils of lavender and grapefruit were used as active pharmaceutical ingredients. Clove extract was obtained by the method of subcritical extraction from various raw materials, the choice of which was based on the yield of the CO2 extract and the study of its phytochemical and microbiological properties. Based on the results of microscopic and diffraction analyses, the rational time of ultrasonic exposure for the emulsion of active pharmaceutical ingredients was established. Mucoadhesive polymers were used as stabilizers of the two-phase system and prolongators. This article discusses the impact of the type and concentration of mucoadhesive polymers on the stability of the emulsion system; the viscous, textural, adhesive, and film characteristics of oromucosal spray; and the parameters determining sprayability.

A curcumin-loaded biopolymeric nanocomposite alleviates dextran sulfate sodium induced ulcerative colitis via suppression of inflammation and oxidative stress

Functional drugs nano delivery systems manufactured from natural active products are promising for the field of biomedicines. In this study, an anti-ulcerative colitis (UC) curcumin loaded biopolymeric nanocomposite (CZNH) was fabricated and investigated. CZNH nanocomposite was obtained using the anti-solvent precipitation method, wherein curcumin-loaded zein colloidal particles served as the core, while sodium casein (NaCas) and hyaluronic acid (HA) formed the outermost layer of CZNH nanocomposite. Fourier transform infrared (FT-IR) spectrum and transmission electron microscopy (TEM) findings demonstrated that CZNH nanocomposite was a double-layer spherical micelle (250 nm) resulting from the hydrogen bond interactions and electrostatic adsorptions between zein, NaCas, and HA. Furthermore, CZNH nanocomposite exhibited prominent resuspension and storage stability in aqueous solution, which can be stored at 4 °C for approximately 30 days. In vivo anti-UC studies showed that CZNH nanocomposite could effectively alleviate UC symptoms via mediating inflammatory factors [tumor necrosis factor-α (TNF-α), interleukin-1β (IL-1β), and IL-6], myeloperoxidase (MPO), and oxidative stress factor [malondialdehyde (MDA), superoxide dismutase (SOD), and glutathione peroxidase (GSH-Px)]. This study suggested that the CZNH nanocomposite showed great promise as an efficient curcumin nanocarrier for UC therapy.

Characterisation of a casein-/whey protein concentrate-Antarctic krill oil emulsion system and improvement of its storage stability

AIMS

To develop Antarctic krill oil emulsions with casein and whey protein concentrate (WPC) and study their physicochemical properties and storage stability.

METHODS

Emulsions were prepared by homogenisation and ultrasonication. The properties of the emulsions were investigated via ultraviolet ray spectroscopy, dynamic light scattering, confocal laser scanning microscope, sodium dodecyl sulphate-polyacrylamide gel electrophoresis, Fourier transform infra-red spectrometer, and fluorescence spectrum. Shelf life was predicted by the Arrhenius model.

RESULTS

Casein- and WPC-krill oil emulsions were well formed; the mean particle diameters were less than 128.19 ± 0.64 nm and 158 ± 1.56 nm, the polymer dispersity indices were less than 0.26 ± 0.01 and 0.27 ± 0.01, and the zeta potential were around -46.88 ± 5.02 mV and -33.51 ± 2.68 mV, respectively. Shelf life was predicted to be 32.67 ± 1.55 days and 29.62 ± 0.65 days (40 °C), 27.69 ± 1.15 days and 23.58 ± 0.14 days (50 °C), 24.02 ± 0.15 days and 20.1 ± 0.08 days (60 °C).

CONCLUSION

The prepared krill oil emulsions have great potential to become a new krill oil supplement.

Whey proteins as multifunctional food materials: Recent advancements in hydrolysis, separation, and peptidomimetic approaches

Whey protein derived bioactives, including α-lactalbumin, ß-lactoglobulin, bovine serum albumin, lactoferrin, transferrin, and proteose-peptones, have exhibited wide ranges of functional, biological and therapeutic properties varying from anticancer, antihypertensive, and antimicrobial effects. In addition, their functional properties involve gelling, emulsifying, and foaming abilities. For these reasons, this review article is framed to understand the relationship existed in between those compound levels and structures with their main functional, biological, and therapeutic properties exhibited either in vitro or in vivo. The impacts of hydrolysis mechanism and separation techniques in enhancing those properties are likewise discussed. Furthermore, special emphasize is given to multifunctional effects of whey derived bioactives and their future trends in ameliorating further food, pharmaceutical, and nutraceutical products. The underlying mechanism effects of those properties are still remained unclear in terms of activity levels, efficacy, and targeted effectiveness. For these reasons, some important models linking to functional properties, thermal properties and cell circumstances are established. Moreover, the coexistence of radical trapping groups, chelating groups, sulfhydryl groups, inhibitory groups, and peptide bonds seemed to be the key elements in triggering those functions and properties. Practical Application: Whey proteins are the byproducts of cheese processing and usually the exploitation of these food waste products has increasingly getting acceptance in many countries, especially European countries. Whey proteins share comparable nutritive values to milk products, particularly on their richness on important proteins that can serve immune protection, structural, and energetic roles. The nutritive profile of whey proteins shows diverse type of bioactive molecules like α-lactalbumin, ß-lactoglobulin, lactoferrin, transferrin, immunoglobulin, and proteose peptones with wide biological importance to the living system, such as in maintaining immunological, neuronal, and signaling roles. The diversification of proteins of whey products prompted scientists to exploit the real mechanisms behind of their biological and therapeutic effects, especially in declining the risk of cancer, tumor, and further complications like diabetes type 2 and hypertension risk effects. For these reasons, profiling these types of proteins using different proteomic and peptidomic approaches helps in determining their biological and therapeutic targets along with their release into gastrointestinal tract conditions and their bioavailabilities into portal circulation, tissue, and organs. The wide applicability of those protein fractions and their derivative bioactive products showed significant impacts in the field of emulsion and double emulsion stabilization by playing roles as emulsifying, surfactant, stabilizing, and foaming agents. Their amphoteric properties helped them to act as excellent encapsulating agents, particularly as vehicle for delivering important vitamins and bioactive compounds. The presence of ferric elements increased their transportation to several metal-ions in the same time increased their scavenging effects to metal-transition and peroxidation of lipids. Their richness with almost essential and nonessential amino acids makes them as selective microbial starters, in addition their richness in sulfhydryl amino acids allowed them to act a cross-linker in conjugating further biomolecules. For instance, conjugating gold-nanoparticles and fluorescent materials in targeting diseases like cancer and tumors in vivo is considered the cutting-edges strategies for these versatile molecules due to their active diffusion across-cell membrane and the presence of specific transporters to these therapeutic molecules.

Surface adsorption properties of peptides produced by non-optimum pH pepsinolysis of proteins: A combined experimental and self-consistent-field calculation study

HYPOTHESIS

Partial hydrolysis of large molecular weight (Mw), highly aggregated plant proteins is frequently used to improve their solubility. However, if this hydrolysis is extensive, random or nonselective, it is unlikely to improve functional properties such as surface activity, emulsion, or foam-stabilising capacity.

EXPERIMENTS AND SIMULATION

Soy protein isolate (SPI) was hydrolysed by pepsin under optimal (pH 2.1) and non-optimal (pH 4.7) conditions. The surface activity and emulsion stabilising capacity of the resultant peptides were measured and compared. The colloidal interactions between a pair of emulsion droplets were modelled via Self-Consistent-Field Calculations (SCFC).

FINDINGS

Hydrolysis at pH 2.1 and 4.7 resulted in a considerable increase in measured surface activity compared to the native (non-hydrolysed) SPI, but the hydrolysate from pH 2.1 was not as good an emulsion stabiliser as the hydrolysate (particularly the fraction Mw > 10 kDa) at pH 4.7. Furthermore, peptide analysis of the latter suggested it was dominated by a fragment of one of the major soy proteins β-conglycinin, with Mw ≈ 25 kDa. SCFC calculations confirmed that interactions mediated by adsorbed layers of this peptide point to it being an excellent emulsion stabiliser.

Effect of Surfactant Type on Foaming Properties of Milk

The presence of low molecular weight surfactants is suspected as one of the causes of poorly foaming milk, as they can interfere with milk proteins in the formation and stabilization of foam. Here, we explore the effect of various surfactants on the foaming properties of reconstituted skim milk powders. Each surfactant is different in electrical charge and molecular weight, including cleaning O- and E-coded chemicals, Tween 80, sucrose stearate, sodium oleate, sodium dodecyl sulfate, cetyltrimethylammonium bromide, benzalkonium chloride, and lecithin. The results showed that surfactants had different effects on foamability, foam stability, and structure, due to their varied effects on milk properties (e.g., pH, zeta potential, and surface tension). E-coded chemicals and sucrose stearate markedly decreased milk foamability, while the impact of Tween 80 and lecithin was considered detrimental to foam stability, as they mostly induced the production of large air bubbles in the foam.

A Review of Pickering Emulsions: Perspectives and Applications

Pickering emulsions are systems composed of two immiscible fluids stabilized by organic or inorganic solid particles. These solid particles of certain dimensions (micro- or nano-particles), and desired wettability, have been shown to be an alternative to conventional emulsifiers. The use of biodegradable and biocompatible stabilizers of natural origin, such as clay minerals, presents a promising future for the development of Pickering emulsions and, with this, they deliver some advantages, especially in the area of biomedicine. In this review, the effects and characteristics of microparticles in the preparation and properties of Pickering emulsions are presented. The objective of this review is to provide a theoretical basis for a broader type of emulsion, in addition to reviewing the main aspects related to the mechanisms and applications to promote its stability. Through this review, we highlight the use of this type of emulsion and its excellent properties as permeability promoters of solid particles, providing ideal results for local drug delivery and use in Pickering emulsions.

Impact of Electric Arcs and Pulsed Electric Fields on the Functional Properties of Beta-Lactoglobulin

Beta-lactoglobulin (β-lg) is a major whey protein with various techno-functional properties that can be improved by several treatments. Therefore, the objective of this study was to explore the impact of green high-voltage electrical treatments (HVETs)—namely, pulsed electric fields and electric arcs—on the functional properties of β-lg. Both emulsifying and foaming stability and capacity, as well as the hygroscopicity of non-treated and pretreated β-lg, were explored. The results demonstrated that the emulsifying capacity and stability of pretreated samples increased by 43% and 22% when compared to native β-lg, respectively. Likewise, the pretreated β-lg displayed better foaming stability compared to native β-lg. In addition, the HVETs significantly decreased the hygroscopicity of β-lg (by 48% on average), making it a good ingredient with reduced hygroscopicity for the food industry.

Interfacial protein-protein displacement at fluid interfaces

Protein blends are used to stabilise many traditional and emerging emulsion products, resulting in complex, non-equilibrated interfacial structures. The interface composition just after emulsification is dependent on the competitive adsorption between proteins. Over time, non-adsorbed proteins are capable of displacing the initially adsorbed ones. Such rearrangements are important to consider, since the integrity of the interfacial film could be compromised after partial displacement, which may result in the physical destabilisation of emulsions. In the present review, we critically describe various experimental techniques to assess the interfacial composition, properties and mechanisms of protein displacement. The type of information that can be obtained from the different techniques is described, from which we comment on their suitability for displacement studies. Comparative studies between model interfaces and emulsions allow for evaluating the impact of minor components and the different fluid dynamics during interface formation. We extensively discuss available mechanistic physical models that describe interfacial properties and the dynamics of complex mixed systems, with a focus on protein in-plane and bulk-interface interactions. The potential of Brownian dynamic simulations to describe the parameters that govern interfacial displacement is also addressed. This review thus provides ample information for characterising the interfacial properties over time in protein blend-stabilised emulsions, based on both experimental and modelling approaches.

Effects of Proteins and Mineral Ions on the Physicochemical Properties of 1,3-Dioleoyl-2-Palmitoylglycerol Emulsion to Mimic a Liquid Infant Formula

Proteins and minerals in infant formula not only serve as nutrients, but also have important effects on the physical and chemical stability of emulsions. In this study, calcium carbonate (0 or 9.08 mM) and potassium chloride (0 or 15.96 mM), as representatives of divalent and monovalent minerals, were added to 1,3-dioleoyl-2-palmitoylglycerol (OPO) emulsions in different ratios (10:0, 9:1, 6:4, 5:5, and 0:10) of whey protein isolate (WPI) and sodium caseinate (CN). The influence of proteins and minerals on emulsion stability was investigated by analyzing particle size, zeta potential, creaming index, rheological properties, storage stability, and lipid oxidation. 1,3-dioleoyl-2-palmitoylglycerol (OPO) emulsions could be destabilized by adding Ca²⁺, as shown by the increase in particle size index, creaming index, and the decrease in zeta potential magnitude. Divalent ions could affect the electrostatic interactions between lipid droplets and the interactive effects of ion surface adsorption. In addition, the effect of different protein ratios on the physical stability of emulsions was not significant under the same ion-type conditions. In terms of chemical stability, higher oxidized values were found in emulsions stabilized with only CN than in those containing WPI. Our study showed that protein ratios and minerals played an important role in the stability of OPO emulsions, which might provide a reference for the development and utilization of liquid infant formula.

Properties of Sweet Buttermilk Released from the Churning of Cream Separated from Sheep or Cow Milk or Sheep Cheese Whey: Effect of Heat Treatment and Storage of Cream

The objective of the study was to compare the buttermilk released from the churning of sweet cream separated from sheep milk (BSM) or whey (BSW) with the buttermilk from sweet cow milk cream (BCM). Additional experimental factors were the heat treatment (68 °C for 10 or 30 min) and storage of cream (refrigeration or freezing). The composition of BSM was the most advantageous in terms of non-fat solids, protein-which was the most abundant solid component-casein, calcium and phosphorus contents. No significant differences were observed in the phospholipids (PL) content of BSM, BCM and BSW. Antioxidant potential and emulsion stability (ES) of BSM were the highest. The radical scavenging activity (RSA) of BSW was high opposite to chelating activity (CA). Some functional properties of BSW were similar to those of BSM and BCM. The freezing of cream affected the churning, the fat content, the soluble nitrogenous fraction at pH 4.6 (WSN) and some functional properties of buttermilk, but not in a consistent manner. The properties of BSM were marginally affected or unaffected by the use of frozen cream. The freezing of whey cream caused significant changes (p < 0.05) in the protein profile and the functional behaviour of BSW. Cream heat treatment affected the WSN of BSW opposite to its sweet cream counterparts.

Characterization and stability of peppermint oil emulsions using polyglycerol esters of fatty acids and milk proteins as emulsifiers

Three peppermint oil emulsions using polyglycerol esters of fatty acids-casein (PGFE-CN), polyglycerol esters of fatty acids-sodium caseinate (PGFE-NaCN), and polyglycerol esters of fatty acids-whey protein isolate (PGFE-WPI) as emulsifiers were fabricated, and the droplet size, zeta potential, viscosity, and stability of emulsions were determined. The experimental results showed that the emulsion containing PGFE-CN has relatively smaller droplet size of 231.77 ± 0.49 nm. No significant changes were observed on the average particle size, polydispersity index and zeta potential during 4-week of storage, indicating that the emulsions kept stable against pH, salt ion, freeze-thaw, and storage. Fourier transform infrared spectrometer (FTIR) results showed that the electrostatic interaction occurs between CN and PGFE in the emulsion. The confocal laser scanning microscope (CLSM) was used to observe the microstructure of the emulsion, proving that droplets were evenly distributed throughout the aqueous phase by PGFE-CN emulsifier. The protein-stabilized emulsions can be used as potential carriers for the delivery of the lipophilic nutrients such as peppermint oil. PRACTICAL APPLICATION: PGFE-CN emulsifier can be directly added to the beverage systems containing oil or protein, such as coconut milk, peanut milk, and walnut milk. It can enhance the stability of beverage, prevent the precipitation, stratification, and oil floating, improve the homogeneity of the system and therefore extend the shelf life.

Microcapsules Consisting of Whey Proteins-Coated Droplets of Lipids Embedded in Wall Matrices of Spray-Dried Microcapsules Consisting Mainly of Non-Fat Milk Solids

The effects of wall composition and heat treatment on the formation and properties of core-in-wall emulsions (CIWEs) consisting of whey protein-coated milkfat (AMF) droplets and a dispersion of non-fat milk solids (MSNF) were investigated. Microcapsules were prepared by spray drying these CIWEs. The d_3.2 of the CIWEs ranged from 0.36 to 0.54 μm. Surface excess of the CIWEs ranged from 1.39 to 6.57 mg/m², and was influenced by concentration of whey proteins and heat treatment (30 min at 90 °C). Results indicated a preferential adsorption of β-lg at the O/W interface. Whey proteins accounted for up to 90% of the proteins adsorbed at the O/W interface. The core retention during spray drying ranged from 90.3% to 97.6% and microencapsulation efficiency ranged from 77.9% to 93.3%. The microcapsules exhibited an excellent long-term oxidative stability at 20 and 30 °C that was superior to that of microcapsules consisting of milkfat and MSNF, where the O/W interface was populated mainly by caseins. The superior oxidative stability could be attributed to the formation of dense whey-proteins-based films at the O/W interfaces of the CIWEs that isolated the core domains from the environment. The results open new opportunities in developing highly stable lipids-containing microcapsules and dairy powders.

Effect of substituting whey cream for sweet cream on the textural and rheological properties of cream cheese

In the manufacture of cream cheese, sweet cream and milk are blended to prepare the cream cheese mix, although other ingredients such as condensed skim milk and skim milk powder may also be included. Whey cream (WC) is an underutilized fat source, which has smaller fat droplets and slightly different chemical composition than sweet cream. This study investigated the rheological and textural properties of cream cheeses manufactured by substituting sweet cream with various levels of WC. Three different cream cheese mixes were prepared: control mix (CC; 0% WC), cream cheese mixes containing 25% WC (25WC; i.e., 75% sweet cream), and cream cheese mixes with 75% WC (75WC; i.e., 25% sweet cream). The CC, 25WC, and 75WC mixes were then used to manufacture cream cheeses. We also studied the effect of WC on the initial step in cream cheese manufacture (i.e., the acid gelation process monitored using dynamic small amplitude rheology). Acid gels were also prepared with added denatured whey proteins or membrane proteins/phospholipids (PL) to evaluate how these components affected gel properties. The rheological, textural, and sensory properties of cream cheeses were also measured. The WC samples had significantly higher levels of PL and insoluble protein compared with sweet cream. An increase in the level of WC reduced the rate of acid gel development, similar to the effect of whey phospholipid concentrate added to mixes. In cream cheese, an increase in the level of added WC resulted in significantly lower storage modulus values at temperatures <20°C. Texture results, obtained from instrumental and sensory analyses, showed that high level of WC resulted in significantly lower firmness or hardness values and higher stickiness compared with cream cheeses made with 25WC or CC cream cheeses. The softer, less elastic gels or cheeses resulting from the use of high levels of WC are likely due to the presence of components such as PL and proteins from the native milk fat globule membrane. The use of low levels of WC in cream cheese did not alter the texture, whereas high levels of WC could be used if manufacturers want to produce more spreadable products.

Conformational Changes of Whey and Pea Proteins upon Emulsification Approached by Front-Surface Fluorescence

Proteins are widely used to stabilize emulsions, and plant proteins have raised increasing interest for this purpose. The interfacial and emulsifying properties of proteins depend largely on their molecular properties. We used fluorescence spectroscopy to characterize the conformation of food proteins from different biological origins (dairy or pea) and transformation processes (commercial or lab-made isolates) in solution and at the oil-water interface. The fourth derivative of fluorescence spectra provided insights in the local environment of tryptophan (Trp) residues and thus in the protein structure. In emulsions, whey proteins adsorbed with their Trp-rich region at the oil-water interface. Proteins in the commercial pea isolate were present as soluble aggregates, and no changes in the local environment of the Trp residues were detected upon emulsification, suggesting that these structures adsorb without conformational changes. The lab-purified pea proteins were less aggregated and a Trp-free region of the vicilin adsorbed at the oil-water interface.

Emerging Emulsifiers: Conceptual Basis for the Identification and Rational Design of Peptides with Surface Activity

Emulsifiers are gradually evolving from synthetic molecules of petrochemical origin to biomolecules mainly due to health and environmental concerns. Peptides represent a type of biomolecules whose molecular structure is composed of a sequence of amino acids that can be easily tailored to have specific properties. However, the lack of knowledge about emulsifier behavior, structure-performance relationships, and the implementation of different design routes have limited the application of these peptides. Some computational and experimental approaches have tried to close this knowledge gap, but restrictions in understanding the fundamental phenomena and the limited property data availability have made the performance prediction for emulsifier peptides an area of intensive research. This study provides the concepts necessary to understand the emulsifying behavior of peptides. Additionally, a straightforward description is given of how the molecular structure and conditions of the system directly impact the peptides' ability to stabilize emulsion droplets. Moreover, the routes to design and discover novel peptides with interfacial and emulsifying activity are also discussed, along with the strategies to address some of their major pitfalls and challenges. Finally, this contribution reviews methodologies to build and use data sets containing standard properties of emulsifying peptides by looking at successful applications in different fields.

Artemether-Loaded Zein Nanoparticles: An Innovative Intravenous Dosage Form for the Management of Severe Malaria

Artemether, an artemisinin derivative, is used in the management of life-threatening severe malaria. This study aimed to develop an intravenous dosage form of artemether using nanotechnology. Artemether-loaded zein nanoparticles were prepared by modified antisolvent precipitation using sodium caseinate as a stabilizer. Subsequently, the physicochemical properties of the nanoparticles were characterized; the in vitro hemolytic property was examined with red blood cells, while the pharmacokinetic profile was evaluated in Sprague–Dawley rats after intravenous administration. The artemether-loaded zein nanoparticles were found to display good encapsulation efficiency, excellent physical stability and offer an in vitro extended-release property. Interestingly, encapsulation of artemether into zein nanoparticles substantially suppressed hemolysis, a common clinical phenomenon occurring after artemisinin-based antimalarial therapy. Upon intravenous administration, artemether-loaded zein nanoparticles extended the mean residence time of artemether by ~80% in comparison to the free artemether formulation (82.9 ± 15.2 versus 45.6 ± 16.4 min, p < 0.01), suggesting that the nanoparticles may prolong the therapeutic duration and reduce the dosing frequency in a clinical setting. In conclusion, intravenous delivery of artemether by artemether-loaded zein nanoparticles appears to be a promising therapeutic option for severe malaria.

Partitioning Behavior and Interfacial Activity of Phenolic Acid Derivatives and their Impact on β-Lactoglobulin at the Oil-Water Interface

Proteins are able to stabilize dispersed food systems due to their amphiphilic nature, acting as emulsifiers. Their interfacial properties can be influenced by different methods, including the formation of protein-phenol nanocomplexes. In this study, the interfacial behavior of phenolic compounds and protein-phenol nanocomplexes was first characterized according to the oil-water partitioning behavior of phenolic acid derivatives according to their molecular structure and its impact on interfacial tension. The influence of the phenolic compounds on protein film formation and its properties by dilatational rheology was then evaluated. The most phenolic acid derivatives are predominantly present in the aqueous phase. Despite their hydrophobic benzene body, weak interfacial activity was observed depending on their chemical structure. This result supports possible protein-phenol nanocomplex formation in the aqueous phase and possible interactions at the oil-water interface. Protein-phenol nanocomplexes showed decreased interfacial adsorption properties and decreased viscoelastic interfacial behavior, depending on the expansion of the delocalized π-electrons in the phenol.

Heat stability of emulsions using functionalized milk protein concentrate generated by supercritical fluid extrusion

In this study, thermostable oil-in-water emulsions containing high protein contents were developed using milk protein concentrate (MPC) that was functionalized by supercritical fluid extrusion (SCFX) processing at low temperature and shear. Functionalized MPC (f-MPC) emulsions (3% protein-80% oil and 10% protein-50% oil) were compared with emulsions stabilized by commercial MPC (c-MPC), sodium caseinate (NaCas), and a commercial mayonnaise for their emulsifying properties and heat stability at 70 and 90 °C for 30 min, and 121 °C for 15 min. Zeta-potentials and interfacial protein concentrations of f-MPC emulsions were higher than that of c-MPC emulsions. f-MPC emulsions remained stable against creaming for at least 8 weeks at room temperature (23 °C), while their c-MPC counterparts showed significant creaming at the same conditions. Even after heating at 121 °C for 15 min, f-MPC emulsions retained their structural integrity as observed from their confocal images, droplet size distributions, and viscosities. In contrast, c-MPC emulsions and mayonnaise disintegrated upon heating at 121 °C for 15 min, and oil droplets of mayonnaise partially coalesced during heating at 90 °C for 30 min. f-MPC emulsions revealed higher viscosities compared to c-MPC emulsions, providing them improved stability. Viscosities of f-MPC emulsions were not significantly affected by heating at 90 °C for 30 min, while other emulsions exhibited a substantial increase in their viscosities due to protein denaturation and aggregation. Thus, f-MPC emulsions can be utilized in the development of protein-enriched functional foods (e.g., spreads) that are stable against high heat treatments.

Effect of Toluene and Hexane Sorption on the Rheology and Interfacial Properties of Lecithin-Based Emulsion Gels

A novel sorbent material consisting of a gel made from canola oil and water, emulsified with lecithin, was used to remove two model solvents from water. Sorption capacity was quantified through small-scale batch experiments. The structure and the mechanical properties of the gel were compared with and without added solvent to assess their cohesiveness upon removing contaminants from water. Confocal microscopy showed that the initial gel consisted of water droplets clustered in a canola oil continuous phase. The G' of the gels increased with solvent absorption to a maximum at 33% (v/v) hexane or 24% (v/v) toluene. Larger absorbed volumes led to decreases in G' of the gel. G' for solvent mixtures of 50% toluene and 50% hexane was intermediate between G' measured for the same volumes of pure solvents. Confocal microscopy suggests that the decrease of G' upon addition of large solvent volumes was due to a simple dilution effect. It is hypothesized that the initial increase in storage modulus was caused by changes in the structure of the lecithin films formed at the oil-water interfaces. This hypothesis was evaluated through measurements of interfacial tension, visualization of the interface with optical microscopy, force measurements of a single droplet under compression using a cantilevered-capillary force apparatus, compressional isotherm measurements conducted using a Langmuir trough. The cantilevered-capillary force apparatus and Langmuir trough experiments demonstrated that lecithin films at the canola oil-water interface were rigidified by toluene and hexane addition.

The effect of heat treatment on the microstructure and functional properties of whey protein from goat milk

This work investigated the effects of thermal processing methods commonly used in the dairy industry and prolonged treatment at different temperatures on the denaturation, microstructure, and functional properties of whey proteins (WP) from goat milk. The complete denaturation of WP was observed in goat milk treated at 85°C for 30 min, and at a higher temperature (>85°C), a considerable amount of WP was easily denatured. The low temperature, long time treatment had the least effect on the secondary structure, whereas ultra-high temperature treatment had the greatest effect, and the amount of regular structures decreased gradually with prolonged time. The most serious morphological damage occurred after treatment at 85°C for 30 min, which was consistent with the denaturation results. This result indicated that the denaturation degree, particle size, surface hydrophobicity, and microstructure had a strong influence on the functional properties of WP from goat milk after heat treatment. The heat treatment of goat milk at 65°C for 30 min and 85°C for 15 s increased the particle size, turbidity, zeta potential, and surface hydrophobicity of WP, and these increases ensured that the WP had a good emulsifying activity index, water-holding capacity, oil-holding capacity, foaming capacity, and foam stability. This study simulated the heat treatment conditions used in actual production, aiming to provide a theoretical basis for industry.

The influence of temperature- and divalent-cation-mediated aggregation of β-casein on the physical and microstructural properties of β-casein-stabilised emulsions

The objective of this study was to assess the influence of self-association of β-casein (β-CN) induced by both increasing temperature (5-55 °C) and divalent cation addition (Ca²⁺ or Mg²⁺) on the properties of β-CN-stabilised emulsions. The particle size of 0.5% (w/w) β-CN in 10 mM imidazole/HCl buffer (pH 6.8) was determined as a function of temperature and addition of divalent cations. Addition of CaCl₂ caused a greater increase in protein particle size than MgCl₂. Oil-in-water emulsions stabilised with 0.5% (w/w) β-CN, β-CN with added CaCl₂ or MgCl₂ (β-CN/Ca and β-CN/Mg, respectively) were also investigated as a function of temperature using light scattering, analytical centrifugation, rheology and confocal laser scanning microscopy (CLSM). Emulsions prepared with β-CN/Ca flocculated after incubation at 55 °C for 20 min and displayed significantly different physical properties (p < 0.05) compared to emulsions stabilised with β-CN or β-CN/Mg in the temperature range 5-55 °C. Based on CLSM analysis and analysis of the interfacial protein load, this flocculation was attributed to the interaction of adsorbed β-CN between droplets and the interaction of adsorbed and non-adsorbed β-CN aggregates in the aqueous phase via calcium bridges. Furthermore, the flocculation of β-CN/Ca emulsions was reversible upon cooling, which is similar to that of β-CN/Ca in solution. In conclusion, the temperature-dependent behaviour of β-CN-stabilised emulsions correlated to the temperature-induced aggregation of β-CN, particularly in the presence of Ca²⁺. Hence, the stability of β-CN-stabilised emulsions can be predicted from the extent of β-CN aggregation in aqueous solution (i.e., aggregate size).

Fabrication and Characterization of Zein Composite Particles Coated by Caseinate-Pectin Electrostatic Complexes with Improved Structural Stability in Acidic Aqueous Environments

Zein composite particles coated with caseinate-pectin electrostatic complexes (zein-caseinate-pectin particles) were fabricated using an electrostatic deposition and liquid-liquid dispersion method without heating treatment. Compared to zein particles coated only with caseinate, the acidic stability of zein-caseinate-pectin particles was greatly improved, and the particle aggregation was suppressed at pH 3–6, especially at pH values near the isoelectric point of caseinate (pH 4–5). Besides, desirable long-term storage stability and re-dispersibility were observed. Under different zein to curcumin (Cur) feeding ratios (10:1, 20:1, 30:1 and 40:1, w/w), the Cur-loaded zein-caseinate-pectin particles had a spherical shape with an average diameter ranging from 358.37 to 369.20 nm, a narrow size distribution (polydispersity index < 0.2) and a negative surface charge ranging from −18.87 to −19.53 mV. The relatively high encapsulation efficiencies of Cur (81.27% to 94.00%) and desirable re-dispersibility were also achieved. Fluorescence spectroscopy indicated that the encapsulated Cur interacted with carrier materials mainly through hydrophobic interactions. The in-vitro release profile showed a sustained release of Cur from zein-caseinate-pectin particles in acidic aqueous environment (pH 4) up to 24 h, without any burst effect. In addition, the encapsulation retained more ABTS^•+ radical scavenging capacity of Cur during 4 weeks of storage. These results suggest that zein-caseinate-pectin particles may be used as a potential delivery system for lipophilic nutrients in acidic beverages.