Ceramic granules enhanced with B2A peptide for lumbar interbody spine fusion: an experimental study using an instrumented model in sheep

Advances in implants and bone graft types for lumbar spinal fusion surgery

The increasing prevalence of spinal disorders worldwide necessitates advanced treatments, particularly interbody fusion for severe cases that are unresponsive to non-surgical interventions. This procedure, especially 360° lumbar interbody fusion, employs an interbody cage, pedicle screw-and-rod instrumentation, and autologous bone graft (ABG) to enhance spinal stability and promote fusion. Despite significant advancements, a persistent 10% incidence of non-union continues to result in compromised patient outcomes and escalated healthcare costs. Innovations in lumbar stabilisation seek to mimic the properties of natural bone, with evolving implant materials like titanium (Ti) and polyetheretherketone (PEEK) and their composites offering new prospects. Additionally, biomimetic cages featuring precisely engineered porosities and interconnectivity have gained traction, as they enhance osteogenic differentiation, support osteogenesis, and alleviate stress-shielding. However, the limitations of ABG, such as harvesting morbidities and limited fusion capacity, have spurred the exploration of sophisticated solutions involving advanced bone graft substitutes. Currently, demineralised bone matrix and ceramics are in clinical use, forming the basis for future investigations into novel bone graft substitutes. Bioglass, a promising newcomer, is under investigation despite its observed rapid absorption and the potential for foreign body reactions in preclinical studies. Its clinical applicability remains under scrutiny, with ongoing research addressing challenges related to burst release and appropriate dosing. Conversely, the well-documented favourable osteogenic potential of growth factors remains encouraging, with current efforts focused on modulating their release dynamics to minimise complications. In this evidence-based narrative review, we provide a comprehensive overview of the evolving landscape of non-degradable spinal implants and bone graft substitutes, emphasising their applications in lumbar spinal fusion surgery. We highlight the necessity for continued research to improve clinical outcomes and enhance patient well-being.

Rat model of an autologous cancellous bone graft

Autologous cancellous bone (ACB) grafting is the "gold standard" treatment for delayed bone union. However, small animal models for such grafts are lacking. Here, we developed an ACB graft rat model. Anatomical information regarding the iliac structure was recorded from five rat cadavers (10 ilia). Additionally, 5 and 25 rats were used as controls and ACB graft models, respectively. A defect was created in rat femurs and filled with ACB. Post-graft neo-osteogenic potential was assessed by radiographic evaluation and histological analysis. Iliac bone harvesting yielded the maximum amount of cancellous bone with minimal invasiveness, considering the position of parailiac nerves and vessels. The mean volume of cancellous bone per rat separated from the cortical bone was 73.8 ± 5.5 mm³. Bone union was evident in all ACB graft groups at 8 weeks, and new bone volume significantly increased every 2 weeks (P < 0.001). Histological analysis demonstrated the ability of ACB grafts to act as a scaffold and promote bone union in the defect. In conclusion, we established a stable rat model of ACB grafts by harvesting the iliac bone. This model can aid in investigating ACB grafts and development of novel therapies for bone injury.

Electrospun, synthetic bone void filler promotes human MSC function and BMP-2 mediated spinal fusion

INTRODUCTION

Synthetic bone grafts are often used to achieve a well-consolidated fusion mass in spinal fusion procedures. These bone grafts function as scaffolds, and ideally support cell function and facilitate protein binding.

OBJECTIVE

The aim was to characterize an electrospun, synthetic bone void filler (Reb) for its bone morphogenetic protein (BMP)-2 release properties and support of human mesenchymal stem cell (hMSC) function in vitro, and its efficacy in promoting BMP-2-/bone marrow aspirate-(BMA)-mediated posterolateral spinal fusion (PLF) in vivo.

METHODS

BMP-2 release kinetics from Reb versus standard absorbable collagen sponge (ACS) was determined. hMSC adhesion and proliferation on Reb was tested using cell counting, fluorescence microscopy and MTS. Cell osteogenic differentiation was quantified via cellular alkaline phosphatase (ALP) activity. For in vivo analysis, 18 Lewis rats were treated during PLF surgery with the following groups: (I) Reb + BMA, (II) Reb + BMA + BMP-2 and (III) BMA. A safe, minimally effective dose of BMP-2 was used. Fusion consolidation was followed for 3 months using radiography and micro-CT. After sacrifice, fusion rate and biomechanical stiffness was determined using manual palpation, biomechanical tests and histology.

RESULTS

In vitro, BMP-2 release kinetics were similar between Reb versus ACS. MSC proliferation and differentiation were increased in the presence of Reb. At 3 months post-surgery, fusion rates were 29% (group I), 100% (group II), and 0% (group III). Biomechanical stiffness was higher in group II versus I. Micro-CT showed an increased bone volume and connectivity density in group II. Trabecular thickness was increased in group I versus II. H&E staining showed newly formed bone in group II only.

CONCLUSIONS

Reb possesses a high protein binding affinity and promotes hMSC function. Combination with BMA and minimal dose BMP-2 allowed for 100% bone fusion in vivo. This data suggests that a minimally effective dose of BMP-2 can be used when combined with Reb.

Investigational growth factors utilized in animal models of spinal fusion: Systematic review

BACKGROUND

Over 400000 Americans annually undergo spinal fusion surgeries, yet up to 40% of these procedures result in pseudoarthrosis even with iliac crest autograft, the current “gold standard” treatment. Tissue engineering has the potential to solve this problem via the creation of bone grafts involving bone-promoting growth factors (e.g., bone morphogenetic protein 2). A broad assessment of experimental growth factors is important to inform future work and clinical potential in this area. To date, however, no study has systematically reviewed the investigational growth factors utilized in preclinical animal models of spinal fusion.

AIM

To review all published studies assessing investigational growth factors for spinal fusion in animal models and identify promising agents for translation.

METHODS

We conducted a systematic review of the literature using PubMed, Embase, Cochrane Library, and Web of Science databases with searches run on May 29^th, 2018. The search query was designed to include all non-human, preclinical animal models of spinal fusion reported in the literature without a timespan limit. Extracted data for each model included surgical approach, level of fusion, animal species and breed, animal age and sex, and any other relevant characteristics. The dosages/sizes of all implant materials, spinal fusion rates, and follow-up time points were recorded. The data were analyzed and the results reported in tables and text. PRISMA guidelines were followed for this systematic review.

RESULTS

Twenty-six articles were included in this study, comprising 14 experimental growth factors: AB204 (n = 1); angiopoietin 1 (n = 1); calcitonin (n = 3); erythropoietin (n = 1); basic fibroblast growth factor (n = 1); growth differentiation factor 5 (n = 4), combined insulin-like growth factor 1 + transforming growth factor beta (n = 4); insulin (n = 1); NELL-1 (n = 5); noggin (n = 1); P-15 (n = 1); peptide B2A (n = 2); and secreted phosphoprotein 24 (n = 1). The fusion rates of the current gold standard treatment (autologous iliac crest bone graft, ICBG) and the leading clinically used growth factor (BMP-2) ranged widely in the included studies, from 0-100% for ICBG and from 13%-100% for BMP-2. Among the identified growth factors, calcitonin, GDF-5, NELL-1, and P-15 resulted in fusion rates of 100% in some cases. In addition, six growth factors - AB204, angiopoietin 1, GDF-5, insulin, NELL-1, and peptide B2A - resulted in significantly enhanced fusion rates compared to ICBG, BMP-2, or other internal control in some studies. Large heterogeneity in animal species, fusion method, and experimental groups and time points was observed across the included studies, limiting the direct comparison of the growth factors identified herein.

CONCLUSION

Several promising investigational growth factors for spinal fusion have been identified herein; directly comparing the fusion efficacy and safety of these agents may inform clinical translation.

Bone regeneration strategies: Engineered scaffolds, bioactive molecules and stem cells current stage and future perspectives

Bone fractures are the most common traumatic injuries in humans. The repair of bone fractures is a regenerative process that recapitulates many of the biological events of embryonic skeletal development. Most of the time it leads to successful healing and the recovery of the damaged bone. Unfortunately, about 5-10% of fractures will lead to delayed healing or non-union, more so in the case of co-morbidities such as diabetes. In this article, we review the different strategies to heal bone defects using synthetic bone graft substitutes, biologically active substances and stem cells. The majority of currently available reviews focus on strategies that are still at the early stages of development and use mostly in vitro experiments with cell lines or stem cells. Here, we focus on what is already implemented in the clinics, what is currently in clinical trials, and what has been tested in animal models. Treatment approaches can be classified in three major categories: i) synthetic bone graft substitutes (BGS) whose architecture and surface can be optimized; ii) BGS combined with bioactive molecules such as growth factors, peptides or small molecules targeting bone precursor cells, bone formation and metabolism; iii) cell-based strategies with progenitor cells combined or not with active molecules that can be injected or seeded on BGS for improved delivery. We review the major types of adult stromal cells (bone marrow, adipose and periosteum derived) that have been used and compare their properties. Finally, we discuss the remaining challenges that need to be addressed to significantly improve the healing of bone defects.

Bone Morphogenetic Protein-Based Therapeutic Approaches

Bone morphogenetic proteins (BMPs) constitute the largest subdivision of the transforming growth factor (TGF)-β family of ligands and exert most of their effects through the canonical effectors Smad1, 5, and 8. Appropriate regulation of BMP signaling is critical for the development and homeostasis of numerous human organ systems. Aberrations in BMP pathways or their regulation are increasingly associated with diverse human pathologies, and there is an urgent and growing need to develop effective approaches to modulate BMP signaling in the clinic. In this review, we provide a wide perspective on diseases and/or conditions associated with dysregulated BMP signal transduction, outline the current strategies available to modulate BMP pathways, highlight emerging second-generation technologies, and postulate prospective avenues for future investigation.

B2A Polypeptide in Foot and Ankle Fusion

Foot and ankle fusion procedures often incorporate autogenous bone graft to help achieve bony union. Pain and morbidity associated with graft harvest have resulted in decreased autograft use as alternative bone graft substitutes have become available. Recently B2A peptide-coated ceramic granules have been developed and investigated. B2A, a bioactive synthetic multi-domain peptide acting on bone morphogenetic protein receptors of osteoblast precursor cells, amplifies the cell response to bone morphogenetic proteins. Use of B2A-granule has the additional benefit of eliminating autogenous bone graft donor site morbidity. The surgical technique of subtalar arthrodesis incorporating B2A-granule is described.

Bone substitutes and expanders in Spine Surgery: A review of their fusion efficacies

STUDY DESIGN

A narrative review of literature.

OBJECTIVE

This manuscript intends to provide a review of clinically relevant bone substitutes and bone expanders for spinal surgery in terms of efficacy and associated clinical outcomes, as reported in contemporary spine literature.

SUMMARY OF BACKGROUND DATA

Ever since the introduction of allograft as a substitute for autologous bone in spinal surgery, a sea of literature has surfaced, evaluating both established and newly emerging fusion alternatives. An understanding of the available fusion options and an organized evidence-based approach to their use in spine surgery is essential for achieving optimal results.

METHODS

A Medline search of English language literature published through March 2016 discussing bone graft substitutes and fusion extenders was performed. All clinical studies reporting radiological and/or patient outcomes following the use of bone substitutes were reviewed under the broad categories of Allografts, Demineralized Bone Matrices (DBM), Ceramics, Bone Morphogenic proteins (BMPs), Autologous growth factors (AGFs), Stem cell products and Synthetic Peptides. These were further grouped depending on their application in lumbar and cervical spine surgeries, deformity correction or other miscellaneous procedures viz. trauma, infection or tumors; wherever data was forthcoming. Studies in animal populations and experimental in vitro studies were excluded. Primary endpoints were radiological fusion rates and successful clinical outcomes.

RESULTS

A total of 181 clinical studies were found suitable to be included in the review. More than a third of the published articles (62 studies, 34.25%) focused on BMP. Ceramics (40 studies) and Allografts (39 studies) were the other two highly published groups of bone substitutes. Highest radiographic fusion rates were observed with BMPs, followed by allograft and DBM. There were no significant differences in the reported clinical outcomes across all classes of bone substitutes.

CONCLUSIONS

There is a clear publication bias in the literature, mostly favoring BMP. Based on the available data, BMP is however associated with the highest radiographic fusion rate. Allograft is also very well corroborated in the literature. The use of DBM as a bone expander to augment autograft is supported, especially in the lumbar spine. Ceramics are also utilized as bone graft extenders and results are generally supportive, although limited. The use of autologous growth factors is not substantiated at this time. Cell matrix or stem cell-based products and the synthetic peptides have inadequate data. More comparative studies are needed to evaluate the efficacy of bone graft substitutes overall.

A Survey of Strategies to Modulate the Bone Morphogenetic Protein Signaling Pathway: Current and Future Perspectives

Bone morphogenetic proteins (BMPs) constitute the largest subdivision of the TGF-β family of ligands and are unequivocally involved in regulating stem cell behavior. Appropriate regulation of canonical BMP signaling is critical for the development and homeostasis of numerous human organ systems, as aberrations in the BMP pathway or its regulation are increasingly associated with diverse human pathologies. In this review, we provide a wide-perspective on strategies that increase or decrease BMP signaling. We briefly outline the current FDA-approved approaches, highlight emerging next-generation technologies, and postulate prospective avenues for future investigation. We also detail how activating other pathways may indirectly modulate BMP signaling, with a particular emphasis on the relationship between the BMP and Activin/TGF-β pathways.

Optimization of Scaffolds and Surface-Based Treatments for Orthopedic Applications

Improving spinal fusion by optimizing scaffold and surface engineering is a topic of interest for both surgeons and researchers. Concerns regarding patient safety with off-label use of bone morphogenetic protein (BMP) have increased, and patients are choosing minimally invasive spine surgery to lessen morbidity by avoiding harvest of bone graft. These trends may be driving studies on how surgeons can avoid issues associated with biologics (e.g., cost, morbidity), while achieving efficacious and safe bone fusion.

Allogeneic mesenchymal precursor cells (MPCs) combined with an osteoconductive scaffold to promote lumbar interbody spine fusion in an ovine model

BACKGROUND

Advances in immunomagnetic cell sorting have enabled isolation and purification of pleuripotent stem cells from marrow aspirates and have expanded stem cell therapies to include allogeneic sources.

PURPOSE

This study aimed to determine the safety and efficacy of allogeneic mesenchymal precursor cells (MPCs) combined with an osteoconductive scaffold in lumbar interbody spinal fusion using an ovine model.

STUDY DESIGN

Thirty-two skeletally mature ewes underwent a single-level interbody fusion procedure using a Polyetheretherketone fusion cage supplemented with either iliac crest autograft (AG) or an osteconductive scaffold (Mastergraft Matrix, Medtronic, Memphis, TN, USA) with 2.5×10(6) MPCs, 6.25×10(6) MPCs, or 12.5×10(6) MPCs.

METHODS

Plain radiographs and computed tomography scans were scored for bridging bone at multiple points during healing and at necropsy. The biomechanical competency of fusion was scored by manual palpation and quantified using functional radiographs at necropsy. Postnecropsy histopathology and histomorphometric analysis assessed the local response to MPC treatment and quantified the volume and connectivity of newly formed bridging bone. Safety was assessed by serum biochemistry, hematology, and organ histopathology.

RESULTS

Mesenchymal precursor cell treatment caused no adverse systemic or local tissue responses. All analyses indicated MPCs combined with an osteoconductive scaffold achieved similar or better fusion success as AG treatment after 16 weeks, and increasing the MPC dose did not enhance fusion. Manual palpation of the fusion site indicated more than 75% of MPC-treated and 65% of AG-treated animals achieved rigid fusion, which was corroborated with functional radiography. Computed tomography fusion scores indicated all animals in the MPC- and AG-treatment groups were fused at 16 weeks, yet X-ray scores indicated only 67% of the AG-treated animals were fused. Histomorphometry analyses showed equivalent outcomes for fusion connectivity and bony fusion area for MPC- and AG-treated groups. Approximately 6% residual graft material remained in the MPC-treated fusion sites at 16 weeks.

CONCLUSIONS

Adult allogeneic MPCs delivered using an osteoconductive scaffold were both safe and efficacious in this ovine spine interbody fusion model. These results support the use ofallogeneic MPCs as an alternative to AG for lumbar interbody spinal fusion procedures.

Twelve-month results of a multicenter, blinded, pilot study of a novel peptide (B2A) in promoting lumbar spine fusion

OBJECT

Failure of fusion after a transforaminal lumbar interbody fusion (TLIF) procedure is a challenging problem that can lead to ongoing low-back pain, dependence on pain medication, and inability to return to work. B2A is a synthetic peptide that has proven efficacy in achieving fusion in animal models and may have a better safety profile than bone morphogenetic protein. The authors undertook this study to evaluate the safety and efficacy of B2A peptide-enhanced ceramic granules (Prefix) in comparison with autogenous iliac crest bone graft (ICBG, control) in patients undergoing single-level TLIF.

METHODS

Twenty-four patients with single-level degenerative disorders of the lumbar spine at L2-S1 requiring TLIF were enrolled between 2009 and 2010. They were randomly assigned to 3 groups: a control group (treated with ICBG, n = 9), a Prefix 150 group (treated with Prefix 150 μg/cm(3) granules, n = 8), and a Prefix 750 group (treated with Prefix 750 μg/cm(3) granules, n = 7). Outcome measures included the Oswestry Disability Index (ODI), visual analog pain scale, and radiographic fusion as assessed by CT and dynamic flexion/extension lumbar plain radiographs.

RESULTS

At 12 months after surgery, the radiographic fusion rate was 100% in the Prefix 750 group, 78% in the control group, and 50% in the Prefix 150 group, although the difference was not statistically significant (p = 0.08). At 6 weeks the mean ODI score was 41.0 for the control group, 27.7 for the Prefix 750 group, and 32.2 for the Prefix 150 group, whereas at 12 months the mean ODI was 24.4 for control, 31.1 for Prefix 750, and 29.7 for Prefix 150 groups. Complications were evenly distributed among the groups.

CONCLUSIONS

Prefix appears to provide a safe alternative to autogenous ICBG. Prefix 750 appears to show superior radiographic fusion when compared with autograft at 12 months after TLIF, although no statistically significant difference was demonstrated in this small study. Prefix and control groups both appeared to demonstrate comparable improvements to ODI at 12 months.

Local drug delivery for enhancing fracture healing in osteoporotic bone

Fragility fractures can cause significant morbidity and mortality in patients with osteoporosis and inflict a considerable medical and socioeconomic burden. Moreover, treatment of an osteoporotic fracture is challenging due to the decreased strength of the surrounding bone and suboptimal healing capacity, predisposing both to fixation failure and non-union. Whereas a systemic osteoporosis treatment acts slowly, local release of osteogenic agents in osteoporotic fracture would act rapidly to increase bone strength and quality, as well as to reduce the bone healing period and prevent development of a problematic non-union. The identification of agents with potential to stimulate bone formation and improve implant fixation strength in osteoporotic bone has raised hope for the fast augmentation of osteoporotic fractures. Stimulation of bone formation by local delivery of growth factors is an approach already in clinical use for the treatment of non-unions, and could be utilized for osteoporotic fractures as well. Small molecules have also gained ground as stable and inexpensive compounds to enhance bone formation and tackle osteoporosis. The aim of this paper is to present the state of the art on local drug delivery in osteoporotic fractures. Advantages, disadvantages and underlying molecular mechanisms of different active species for local bone healing in osteoporotic bone are discussed. This review also identifies promising new candidate molecules and innovative approaches for the local drug delivery in osteoporotic bone.

A prospective pilot study of B2A-coated ceramic granules (Amplex) compared to autograft for ankle and hindfoot arthrodesis

BACKGROUND

To reduce fusion nonunion, autogenous bone graft is often incorporated into foot and ankle fusion procedures. B2A peptide-coated ceramic granules, with encouraging results in pilot studies of transforaminal lumbar interbody fusion, were here reformulated into Amplex with a coating concentration of 225 μg B2A/cm(3) ceramic granules (B2A-granule) with the goal of eliminating autogenous bone graft in foot and ankle arthrodesis. The purpose of this study was to perform a multicenter prospective randomized pilot clinical trial designed to compare the safety and effectiveness of B2A-granule to autogenous bone graft in patients undergoing foot and ankle arthrodesis surgery.

METHODS

This study was a multicenter, prospective, randomized, pilot clinical trial designed to compare safety and effectiveness of B2A-granule to autogenous bone graft in patients undergoing foot and ankle arthrodesis surgery. Twenty-four patients were enrolled and randomized (1:1) into 2 groups: autogenous bone graft control and B2A-granule. Primary outcome measures at 6 months (with follow-up at 9 and 12 months) included radiographic fusion assessed by computerized tomography and Ankle Osteoarthritis Scale scores for pain and disability.

RESULTS

Radiographic fusion success rates were similar in both groups (100% in the B2A-granule group, 92% autograft). Both the B2A-granule group and the autograft group had improvements in the pain and disability scores over the course of the study. Graft harvest-site pain affected only autograft-treated patients. There were no adverse events attributed to the graft material in either the B2A-granule or autograft group.

CONCLUSION

The results of this pilot study are supportive of a larger clinical trial to assess the safety and efficacy of B2A-granule as a bone graft substitute in foot and ankle fusions.

LEVEL OF EVIDENCE

Level II, prospective comparative study.

Establishment and characterization of an open mini-thoracotomy surgical approach to an ovine thoracic spine fusion model

A large animal model is required for the assessment of minimally invasive, tissue-engineering-based approaches to thoracic spine fusion, with relevance to deformity correction surgery for human adolescent idiopathic scoliosis. Here, we develop a novel open mini-thoracotomy approach in an ovine model of thoracic interbody fusion that allows the assessment of various fusion constructs, with a focus on novel, tissue-engineering-based interventions. The open mini-thoracotomy surgical approach was developed through a series of mock surgeries, and then applied in a live sheep study. Customized scaffolds were manufactured to conform with intervertebral disc space clearances that were required of the study. Six male Merino sheep aged 4-6 years and weighing 35-45 kg underwent the procedure mentioned earlier and were alloted a survival timeline of 6 months. Each sheep underwent a three-level discectomy (T6/7, T8/9, and T10/11) with a randomly allocated implantation of a different graft substitute at each of the following three levels: (1) polycaprolactone (PCL)-based scaffold plus 0.54 μg recombinant human bone morphogenetic protein-2 (rhBMP-2); (2) PCL-based scaffold alone; or (3) autograft. The sheep were closely monitored postoperatively for signs of pain (i.e., gait abnormalities/teeth gnawing/social isolation). Fusion assessments were conducted postsacrifice using computed tomography and hard-tissue histology. All scientific work was undertaken in accordance with the study protocol that was approved by the Institute's committee on animal research. All six sheep were successfully operated on and reached the allotted survival timeline, thereby demonstrating the feasibility of the surgical procedure and postoperative care. There were no significant complications and during the postoperative period, the animals did not exhibit marked signs of distress according to the previously described assessment criteria. Computed tomographic scanning demonstrated higher fusion grades in the rhBMP-2 plus PCL-based scaffold group in comparison to either PCL-based scaffold alone or autograft. These results were supported by a histological evaluation of the respective groups. This novel open mini-thoracotomy surgical approach to the ovine thoracic spine represents a safe surgical method that can reproducibly form the platform for research into various spine-tissue-engineered constructs and their fusion-promoting properties.

Nonclinical Assessment of Tumor Growth Enhancement Potential by B2A-Coated Ceramic Granules Used in Arthodesis

B2A is a synthetic peptide that augments osteodifferentiation and improves bony fusion when delivered on ceramic granules during arthrodesis surgery. Nonclinical safety assessments, including genotoxicity, supported the use of B2A-coated granules as a combination medical device in pilot clinical studies. As a prelude to pivotal clinical studies, an assessment of the possibility that B2A-coated granules (and B2A) could enhance tumor growth was undertaken. B2A-coated granules demonstrated no evidence of genotoxicity. Cell culture studies with human tumor cell lines demonstrated that neither exposure of cells to B2A or B2A-coated granules increased cell proliferation or invasive capability relative to controls. In vivo, surgically implanted B2A-coated granules did not increase tumor growth (4 human tumor cell lines) or metastasis (1 cell line) relative to vehicle controls in immune-compromised rodents. Thus, traditional genotoxicity, as well as specially designed tumor growth enhancement studies, indicates that the possibility of tumor enhancement appears unlikely.

Biocompatibility and inflammation profile of B2A-coated granules used in arthrodesis

The biocompatibility/inflammation profile of B2A-coated ceramic granules was evaluated using a panel of standard biocompatibility protocols (International Organization for Standardization-10993) including skin irritation and delayed-type hypersensitivity (Kligman maximization test), as well as acute, subacute, and chronic toxicity. Additionally, the potential of B2A-coated granules to elicit inflammatory reactions was also assessed using in vivo air pouch models, and B2A was evaluated using in vitro models of leukocyte recruitment and endothelial cell activation. Overall, the findings demonstrate that B2A-coated ceramic granules exhibit good biocompatibility profiles in the murine air pouch model and in standard subcutaneous implant models, and B2A did not demonstrate evidence of leukocyte recruitment or endothelial cell activation. These findings suggest that B2A and B2A-coated granules have little, if any, propensity to initiate inflammation reactions based on leukocyte recruitment. Thus, traditional biocompatibility and specially designed inflammation models indicate a high degree of biocompatibility and a low possibility of toxicity, inflammation, or edema following the implant of B2A-coated granules.

B2A, a receptor modulator, increases the growth of pluripotent and preosteoblast cells through bone morphogenetic protein receptors

B2A (B2A2-K-NS) is a synthetic, multidomain peptide which is being developed to augment spinal fusion and bone repair locally. Using pluripotent mesenchymal cells of murine and human origin, we show that B2A-induced cell proliferation in a modest but dose-dependent manner. However, essentially all human tumor lines tested were not responsive or were weakly responsive to B2A. B2A treatment activated extracellular signal-regulated kinases 1 and 2 (ERK1/2), and the proliferation was partially blocked by an mitogen-activated protein kinase (MEK) inhibitor. The bone morphogenetic protein (BMP) type I receptor kinase inhibitors depressed B2A-induced proliferation. Upregulation of bone morphogenetic protein 2 was not involved, as noggin, DAN, or chordin did not block B2A-induced proliferation. These data suggest that B2A-induced proliferation results from cell-type-specific activation of bone morphogenetic protein receptor, which, in turn, regulates ERK1/2 activity. B2A-induced proliferation, acting through ERK1/2, is a phenomenon that, while not strictly related to the ability of B2A to augment BMP-induced differentiation via the small mothers against decapentaplegic pathway, may ultimately contribute to bone repair in vivo.

Polyglutamate directed coupling of bioactive peptides for the delivery of osteoinductive signals on allograft bone

Allograft bone is commonly used as an alternative to autograft, however allograft lacks many osteoinductive factors present in autologous bone due to processing. In this study, we investigated a method to reconstitute allograft with osteoregenerative factors. Specifically, an osteoinductive peptide from collagen I, DGEA, was engineered to express a heptaglutamate (E7) domain, which binds the hydroxyapatite within bone mineral. Addition of E7 to DGEA resulted in 9× greater peptide loading on allograft, and significantly greater retention after a 5-day interval with extensive washing. When factoring together greater initial loading and retention, the E7 domain directed a 45-fold enhancement of peptide density on the allograft surface. Peptide-coated allograft was also implanted subcutaneously into rats and it was found that E7DGEA was retained in vivo for at least 3 months. Interestingly, E7DGEA peptides injected intravenously accumulated within bone tissue, implicating a potential role for E7 domains in drug delivery to bone. Finally, we determined that, as with DGEA, the E7 modification enhanced coupling of a bioactive BMP2-derived peptide on allograft. These results suggest that E7 domains are useful for coupling many types of bone-regenerative molecules to the surface of allograft to reintroduce osteoinductive signals and potentially advance allograft treatments.

Peptide-based delivery to bone

Peptides are attractive as novel therapeutic reagents, since they are flexible in adopting and mimicking the local structural features of proteins. Versatile capabilities to perform organic synthetic manipulations are another unique feature of peptides compared to protein-based medicines, such as antibodies. On the other hand, a disadvantage of using a peptide for a therapeutic purpose is its low stability and/or high level of aggregation. During the past two decades, numerous peptides were developed for the treatment of bone diseases, and some peptides have already been used for local applications to repair bone defects in the clinic. However, very few peptides have the ability to form bone themselves. We herein summarize the effects of the therapeutic peptides on bone loss and/or local bone defects, including the results from basic studies. We also herein describe some possible methods for overcoming the obstacles associated with using therapeutic peptide candidates.

B2A as a positive BMP receptor modulator

B2A (B2A2-K-NS) is a synthetic multi-domain peptide that in vitro augments bone morphogenetic protein (BMP)-2-induced cell responsiveness and osteodifferentiation. Augmentation of endogenous BMP-2 is thought to ultimately improve bone repair, and has led to clinical evaluation of B2A in orthopedic applications. In this study, we show that B2A binds to BMP receptor (BMPR)-IB, BMPR-II, and BMPR-IA. B2A reduces the EC50 of rh-BMP-2, thus shifting the response curve to the left. B2A enhances the osteogenic activity of BMP-2, but not growth and differentiation factor-5, BMP-7, or BMP-9, indicating its action is highly BMP-2 selective. Additionally, B2A did not augment Wnt-3a- and retinoic acid-induced differentiation. All three functional domains (receptor-binding domain, hydrophobic-linker domain, heparin-binding domain) of B2A are required for optimal bioactivity. Collectively, the results suggest that B2A, via its unique sequence, acts in a manner consistent with a positive receptor modulator to selectively enhance BMP-2 osteodifferentiation, and yet in the absence of BMP-2, B2A is without cooperative effect.

The design and use of animal models for translational research in bone tissue engineering and regenerative medicine

This review provides an overview of animal models for the evaluation, comparison, and systematic optimization of tissue engineering and regenerative medicine strategies related to bone tissue. This review includes an overview of major factors that influence the rational design and selection of an animal model. A comparison is provided of the 10 mammalian species that are most commonly used in bone research, and existing guidelines and standards are discussed. This review also identifies gaps in the availability of animal models: (1) the need for assessment of the predictive value of preclinical models for relative clinical efficacy, (2) the need for models that more effectively mimic the wound healing environment and mass transport conditions in the most challenging clinical settings (e.g., bone repair involving large bone and soft tissue defects and sites of prior surgery), and (3) the need for models that allow more effective measurement and detection of cell trafficking events and ultimate cell fate during the processes of bone modeling, remodeling, and regeneration. The ongoing need for both continued innovation and refinement in animal model systems, and the need and value of more effective standardization are reinforced.