Recent Advances in Metal Decorated Nanomaterials and Their Various Biological Applications: A Review

Structural modification of oil palm lignin via steam explosion pre-treatment as a potential renewable green substitute in corrosion applications

This research demonstrates the significance of steam explosion pre-treatment on the structural and antioxidant properties of lignin-derived from oil palm fronds (OPF) biomass via organosolv pulping. The isolated lignin was distinguished as steam explosion acid impregnation ethanol organosolv lignin (SEA EOL), and steam explosion water impregnation ethanol organosolv lignin (SEW EOL), subsequently assessed through complementary analyses such as FTIR, NMR (1H, 13C, and 2D-HQSC), GPC, thermal analyses (TGA and DSC), and FRAP (antioxidant activity). SEA EOL appeared to exhibit superior lignin extraction compared to SEW EOL (% yield SEA EOL: 13.66 ± 0.35 % > % yield SEW EOL: 11.54 ± 0.33 %). Apart from that, SEA EOL also exhibited smaller lignin matrixes (Mw SEW EOL: 4693 gmol-1 > Mw SEA EOL: 1838 gmol-1), resulting in a higher phenolic hydroxyl content, S/G ratio, and enhanced antioxidant activity compared to SEW EOL. The preliminary rust conversion study of the artifact was conducted using SEA EOL, revealing that 7 wt% possessed the highest RT% with 95.45 ± 0.13 %. The XRD and surface analysis of the treated rust artifact indicated that the rust had been converted into an amorphous phase.

Phosphine-Based Porous Organic Polymer-Stabilized Palladium Nanoparticle Catalyst for the Regioselective Synthesis of Indenones

Phosphorus-embedded porous organic polymers (P-POPs) play a vital role in catalysis and sustainable chemical synthesis. This study uses an olefin-linked P-POP to stabilize Pd nanoparticles that catalyze Larock's annulation to synthesize symmetrical indenones in high yields. Unsymmetric indenones were obtained with exclusive regioselectivities by employing an intramolecular dicarbofunctionalization of a modular alkyne. The approach addresses selectivity challenges in indenone synthesis and broadens the reaction scope by incorporation of aryl halides. The catalyst is robust and recyclable.

Plant polysaccharide-capped nanoparticles: A sustainable approach to modulate gut microbiota and advance functional food applications

Plant-derived polysaccharides have emerged as sustainable biopolymers for fabricating nanoparticles (polysaccharide-based nanomaterials [PS-NPs]), presenting unique opportunities to enhance food functionality and human health. PS-NPs exhibit exceptional biocompatibility, biodegradability, and structural versatility, enabling their integration into functional foods to positively influence gut microbiota. This review explores the mechanisms of PS-NPs interaction with gut microbiota, highlighting their ability to promote beneficial microbial populations, such as Lactobacilli and Bifidobacteria, and stimulate the production of short-chain fatty acids. Key synthesis and stabilization methods of PS-NPs are discussed, focusing on their role in improving bioavailability, stability, and gastrointestinal delivery of bioactive compounds in food systems. The potential of PS-NPs to address challenges in food science, including enhancing nutrient absorption, mitigating intestinal dysbiosis, and supporting sustainable food production through innovative nanotechnology, is critically evaluated. Barriers such as enzymatic degradation and physicochemical stability are analyzed, alongside strategies to optimize their functionality within complex food matrices. The integration of PS-NPs in food systems offers a novel approach to modulate gut microbiota, improve intestinal health, and drive the development of next-generation functional foods. Future research should focus on bridging knowledge gaps in metagenomic and metabolomic profiling of PS-NPs, optimizing their design for diverse applications, and advancing their role in sustainable and health-promoting food innovations.

Halodule uninervis extract facilitates the green synthesis of gold nanoparticles with anticancer activity

Gold nanoparticles (AuNPs) have been utilized in a plethora of applications due to their unique optical properties, high stability, and great biocompatibility. The use of plant extracts in the biosynthesis of AuNPs has emerged as an eco-friendly, inexpensive, and nontoxic approach. In the present study, the ethanolic extract of Halodule uninervis (HUE) was used for the first time in the green synthesis of AuNPs. The biogenic AuNPs were characterized using several spectroscopic and microscopic techniques and their anticancer potential was investigated. They displayed a surface plasmon resonance (SPR) band at 550 nm. Scanning electron microscopy (SEM) and Dynamic light scattering (DLS) analysis proved the synthesis of small and spherical AuNPs with a zeta potential of - 27.66 mV. X-ray diffraction (XRD) pattern established the crystalline nature of AuNPs. Thermogravimetric analysis (TGA) and Fourier transform infra-red spectroscopy (FTIR) data confirmed the role of HUE in the capping and stabilization of the manufactured AuNPs. The produced AuNPs exhibited anticancer activity against several human cancer cell lines, highlighting their potential efficacy as anticancer therapeutic agents. Further analysis revealed that this observed cytotoxicity is mediated via the induction of apoptosis. Overall, our data validate the effective use of H. uninervis extract in the biosynthesis of AuNPs with significant biological properties.

Metallic nanoparticles: a promising novel therapeutic tool against antimicrobial resistance and spread of superbugs

In recent years, antimicrobial resistance (AMR) has become an alarming threat to global health as notable increase in morbidity and mortality has been ascribed to the emergence of superbugs. The increase in microbial resistance because of harboured or inherited resistomes has been complicated by the lack of new and effective antimicrobial agents, as well as misuse and failure of existing ones. These problems have generated severe and growing public health concern, due to high burden of bacterial infections resulting from scarce financial resources and poor functioning health systems, among others. It is therefore, highly pressing to search for novel and more efficacious alternatives for combating the action of these super bacteria and their infection. The application of metallic nanoparticles (MNPs) with their distinctive physical and chemical attributes appears as promising tools in fighting off these deadly superbugs. The simple, inexpensive and eco-friendly model for enhanced biologically inspired MNPs with exceptional antimicrobial effect and diverse mechanisms of action againsts multiple cell components seems to offer the most promising option and said to have enticed many researchers who now show tremendous interest. This synopsis offers critical discussion on application of MNPs as the foremost intervening strategy to curb the menace posed by the spread of superbugs. As such, this review explores how antimicrobial properties of the metallic nanoparticles which demonstrated considerable efficacy against several multi-drugs resistant bacteria, could be adopted as promising approach in subduing the threat of AMR and harvoc resulting from the spread of superbugs.

Gold nanoparticles synthesized from soil-derived Streptomyces sp. ASM19: characterization, antimicrobial, anticancer potency targeted G2/M phase cell-cycle arrest, and in silico studies

Gold nanoparticles (Au) have attracted considerable attention in the field of biomedicine in recent years. The present work was designed to investigate gold nanoparticles obtained using a soil-associated actinomycetes, Streptomyces sp. ASM19. This microorganism was isolated and identified using DNA sequencing. The chemical profile of the Streptomyces sp. ASM19 extract was analyzed using LC-HRES-MS. Streptomyces sp. ASM19 extract was utilized to synthesize actinomycetes-based gold nanoparticles (Ac-AuNPs), which were analyzed using ultraviolet-visible (UV-vis) spectrophotometry, Fourier transform infrared (FTIR) spectroscopy, and atomic force microscopy (AFM). In addition, the antibacterial, and anti-biofilm, as well as, the anti-proliferative properties of Ac-AuNPs against seven cancer lines were investigated. LC-HRES-MS analysis traced a total of 111 peaks, 14 of them are key peaks belonging to the chemical classes, alkaloids, steroids, and polyketides. Analysis of the synthesized Ac-AuNPs revealed that they exhibited a wine-red color and a plasmon band appeared at 540 nm, confirming the formation of the Ac-AuNPs. Further, FTIR confirmed various functional groups present in Ac-AuNPs. The crude extract of Streptomyces sp. ASM19 demonstrated consistent antibacterial activity in contrast to Ac-AuNPs. The anti-proliferative properties of Ac-AuNPs demonstrated encouraging anticancer properties against SCC9 and SCC25 cell lines with IC50 values of 3.77 and 1.56 μg mL-1. Furthermore, Ac-AuNPs had total apoptotic percentages of 26.37% (SCC9) and 32.08% (SCC25), which are around 25 times higher than the control (0.95%). Additionally, it caused a notable G2/M phase cell-cycle arrest. On the other hand, molecular docking study carried out for the annotated compounds; tomaymycin (8) and nocapyrone P (5), showed considerable binding affinities compared to the co-crystallized inhibitor (fisetin) against the cyclin-dependent kinase 6 active site. Overall, the present study could be useful for nano drug delivery and may be applied for clinical studies in the future.

A Comparative Review: Biological Safety and Sustainability of Metal Nanomaterials Without and with Machine Learning Assistance

In recent years, metal nanomaterials and nanoproducts have been developed intensively, and they are now widely applied across various sectors, including energy, aerospace, agriculture, industry, and biomedicine. However, nanomaterials have been identified as potentially toxic, with the toxicity of metal nanoparticles posing significant risks to both human health and the environment. Therefore, the toxicological risk assessment of metal nanomaterials is essential to identify and mitigate potential adverse effects. This review provides a comprehensive analysis of the safety and sustainability of metallic nanoparticles (such as Au NPs, Ag NPs, etc.) in key domains such as medicine, energy, and environmental protection. Using a dual-perspective analysis approach, it highlights the unique advantages of machine learning in data processing, predictive modeling, and optimization. At the same time, it underscores the importance of traditional methods, particularly their ability to offer greater interpretability and more intuitive results in specific contexts. Finally, a comparative analysis of traditional methods and machine learning techniques for detecting the toxicity of metal nanomaterials is presented, emphasizing the key challenges that need to be addressed in future research.

Converging frontiers in cancer treatment: the role of nanomaterials, mesenchymal stem cells, and microbial agents-challenges and limitations

Globally, people widely recognize cancer as one of the most lethal diseases due to its high mortality rates and lack of effective treatment options. Ongoing research into cancer therapies remains a critical area of inquiry, holding significant social relevance. Currently used treatment, such as chemotherapy, radiation, or surgery, often suffers from other problems like damaging side effects, inaccuracy, and the lack of ability to clear tumors. Conventional cancer therapies are usually imprecise and ineffective and usually develop resistance to treatments and cancer recurs. Cancer patients need fresh and innovative treatment that can reduce side effects while maximizing effectiveness. In recent decades several breakthroughs in these, and other areas of medical research, have paved the way for new avenues of fighting cancer including more focused and more effective alternatives. This study reviews exciting possibilities for mesenchymal stem cells (MSCs), nanomaterials, and microbial agents in the modern realm of cancer treatment. Nanoparticles (NPs) have demonstrated surprisingly high potential. They improve drug delivery systems (DDS) significantly, enhance imaging techniques remarkably, and target cancer cells selectively while protecting healthy tissues. MSCs play a double role in tissue repair and are a vehicle for novel cancer treatments such as gene treatments or NPs loaded with therapeutic agents. Additionally, therapies utilizing microbial agents, particularly those involving bacteria, offer an inventive approach to cancer treatment. This review investigates the potential of nanomaterials, MSCs, and microbial agents in addressing the shortcomings of conventional cancer therapies. We will also discuss the challenges and limitations of using these therapeutic approaches.

Harnessing Radiation for Nanotechnology: A Comprehensive Review of Techniques, Innovations, and Application

Nanomaterial properties such as size, structure, and composition can be controlled by manipulating radiation, such as gamma rays, X-rays, and electron beams. This control allows scientists to create materials with desired properties that can be used in a wide range of applications, from electronics to medicine. This use of radiation for nanotechnology is revolutionizing the way we design and manufacture materials. Additionally, radiation-induced nanomaterials are more cost effective and energy efficient. This technology is also having a positive impact on the environment, as materials are being produced with fewer emissions, less energy, and less waste. This cutting-edge technology is opening up new possibilities and has become an attractive option for many industries, from medical advancements to energy storage. It is also helping to make the world a better place by reducing our carbon footprint and preserving natural resources. This review aims to meticulously point out the synthesis approach and highlights significant progress in generating radiation-induced nanomaterials with tunable and complex morphologies. This comprehensive review article is essential for researchers to design innovative materials for advancements in health care, electronics, energy storage, and environmental remediation.

Sunlight-driven photocatalytic degradation of industrial dyes using Withania somnifera decorated MnO2 nanoparticles

This study presents a unique, fast, and environmentally friendly approach for synthesizing MnO2 nanoparticles (MnO2 NPs) utilizing Withania somnifera (Ashwagandha) extract. The formation of nanoparticles was indicated by a color change from dark purple to dark brown within 10 min and validated through techniques including UV-Vis spectroscopy, Field Emission Scanning Electron Microscopy (FESEM), Fourier Transform Infrared Spectroscopy (FTIR), and Energy Dispersive X-ray (EDX). Bromocresol green and Bromothymol blue were established as standards for assessing the photocatalytic efficiency of the synthesized nanoparticles. The synthesized nanocatalyst exhibited remarkable removal efficiency upon sunlight exposure, achieving 92% for Bromothymol blue and 95% for Bromocresol green within a duration of 1 h. The influence of variables including duration, photocatalyst dosage, and photodegradation kinetics was carefully examined to assess the efficacy of the created photocatalyst. The devised procedure is environmentally benign, facile to execute, and does not necessitate any chemical agents or advanced instrumentation for synthesis. This presents a new opportunity for the advancement of green photocatalysts, which may serve as an outstanding nanomaterial for wastewater clean-up.

Advances and prospects of precision nanomedicine in personalized tumor theranostics

Tumor, as the second leading cause of death globally, following closely behind cardiovascular diseases, remains a significant health challenge worldwide. Despite the existence of various cancer treatment methods, their efficacy is still suboptimal, necessitating the development of safer and more efficient treatment strategies. Additionally, the advancement of personalized therapy offers further possibilities in cancer treatment. Nanomedicine, as a promising interdisciplinary field, has shown tremendous potential and prospects in the diagnosis and treatment of cancer. As an emerging approach in oncology, the application of nanomedicine in personalized cancer therapy primarily focuses on targeted drug delivery systems such as passive targeting drug delivery, active targeting drug delivery, and environmentally responsive targeting drug delivery, as well as imaging diagnostics such as tumor biomarker detection, tumor cell detection, and in vivo imaging. However, it still faces challenges regarding safety, biocompatibility, and other issues. This review aims to explore the advances in the use of nanomaterials in the field of personalized cancer diagnosis and treatment and to investigate the prospects and challenges of developing personalized therapies in cancer care, providing direction for the clinical translation and application.

Bioinspired multifunctional silver nanoparticles by Smilax Chenensis and their enhanced biomedical and catalytic applications

Currently, Nano-materials have been explored for their abundant biomedical applications. In the present study the green synthesized (SC-AgNPs) by root extract of Smilax Chenensis have been characterized by UV-visible spectroscopy revealed SPR peak at 432 nm and FT-IR data reveals that the bioactive components of root extract have been actively involved in the reduction and stabilization of SC-AgNPs. TEM and AFM results revealed that SC-AgNPs were roughly spherical in shape. Further, the particle size of SC-AgNPs was also carried out by Dynamic Light Scattering method by aqueous colloidal solution and the results reveals that the SC-AgNPs are poly-dispersed in nature with an average size 45.6 nm with a Z average of 39.5 nm. The stability of colloidal SC-AgNPs was further confirmed by negative zeta potential value of - 21.0 mV. The SC-AgNPs showed good antibacterial activity against both gram -ve and gram + ve bacteria, whereas, SC-AgNPs coupled with antibiotic reveals excellent and enhanced antibacterial activity. The gram -ve E.coli and gram + ve S.aureus revealed highest zone of inhibition when compared to other two bacterial species. So, SC-AgNPs coupled with antibiotics can be excellent alternative to treat antibiotic resistant bacteria. The SC-AgNPs also reveals excellent antioxidant activity among them DPPH method revealed superior activity with an IC50 value76.22. The SC-AgNPs also reveals superior anticancer activity against MDA-MB-231 with IC50 value of 33.98 µg/mL and photo-catalytic activity the optical density of reduced from 1.861 to 0.135 OD within 30 min. The green SC-AgNPs detected to have multiple therapeutic applications.

Targeted gold nanoparticles for ovarian cancer (Review)

Among all malignant gynecological tumors, ovarian cancer (OC) has the highest mortality rate. OC is often diagnosed at advanced and incurable stages; however, early diagnosis can enable the use of optimized and personalized treatments. Intensive research into the synthesis and characterization of gold nanoparticles (AuNPs) has been performed with the aim of developing innovative materials for use in biological and photothermal therapies for OC. AuNPs can be chemically modified and functionalized by binding to a variety of organic compounds and biomolecules, such as peptides, antibodies and therapeutic agents, via simple synthetic processes. They are particularly suitable for use as carriers for drug delivery. In the present review, the synthesis and characteristics of AuNPs are summarized, and their potential in OC therapy are discussed.

Impact of metallic nanoparticles on gut microbiota modulation in colorectal cancer: A review

Colorectal cancer (CRC) is the third most prevalent cancer. Ongoing research aims to uncover the causes of CRC, with a growing focus on the role of gut microbiota (GM) in carcinogenesis. The GM influences CRC development, progression, treatment efficacy, and therapeutic toxicities. For example, Fusobacterium nucleatum and Escherichia coli can regulate microbial gene expression through the incorporation of human small noncode RNA and potentially contribute to cancer progression. Metallic nanoparticles (MNPs) have both negative and positive impacts on GM, depending on their type. Several studies state that titanium dioxide may increase the diversity, richness, and abundance of probiotics bacteria, whereas other studies demonstrate dose-dependent GM dysbiosis. The MNPs offer cytotoxicity through the modulation of MAPK signaling pathways, NF-kB signaling pathways, PI3K/Akt signaling pathways, extrinsic signaling pathways, intrinsic apoptosis, and cell cycle arrest at G1, G2, or M phase. MNPs enhance drug delivery, enable targeted therapy, and may restore GM. However, there is a need to conduct well-designed clinical trials to assess the toxicity, safety, and effectiveness of MNPs-based CRC therapies.

Advancements in Nanoparticle-Based Strategies for Enhanced Antibacterial Interventions

The escalating global threat of antibiotic resistance underscores the urgent need for innovative antimicrobial strategies. This review explores the cutting-edge applications of nanotechnology in combating bacterial infections, addressing a critical healthcare challenge. We critically assess the antimicrobial properties and mechanisms of diverse nanoparticle systems, including liposomes, polymeric micelles, solid lipid nanoparticles, dendrimers, zinc oxide, silver, and gold nanoparticles, as well as nanoencapsulated essential oils. These nanomaterials offer distinct advantages, such as enhanced drug delivery, improved bioavailability, and efficacy against antibiotic-resistant strains. Recent advancements in nanoparticle synthesis, functionalization, and their synergistic interactions with conventional antibiotics are highlighted. The review emphasizes biocompatibility considerations, stressing the need for rigorous safety assessments in nanomaterial applications. By synthesizing current knowledge and identifying emerging trends, this review provides crucial insights for researchers and clinicians aiming to leverage nanotechnology for next-generation antimicrobial therapies. The integration of nanotechnology represents a promising frontier in combating infectious diseases, underscoring the timeliness and imperative of this comprehensive analysis.

Synthetic and biological nanoparticles for cancer immunotherapy

Cancer is becoming the main public health problem globally. Conventional chemotherapy approaches are slowly being replaced or complemented by new therapies that avoid the loss of healthy tissue, limit off-targets, and eradicate cancer cells. Immunotherapy is nowadays an important strategy for cancer treatment, that uses the host's anti-tumor response by activating the immune system and increasing the effector cell number, while, minimizing cancer's immune-suppressor mechanisms. Its efficacy is still limited by poor therapeutic targeting, low immunogenicity, antigen presentation deficiency, impaired T-cell trafficking and infiltration, heterogeneous microenvironment, multiple immune checkpoints and unwanted side effects, which could benefit from improved delivery systems, able to release immunotherapeutic agents to tumor microenvironment and immune cells. Nanoparticles (NPs) for immunotherapy (Nano-IT), have a huge potential to solve these limitations. Natural and/or synthetic, targeted and/or stimuli-responsive nanoparticles can be used to deliver immunotherapeutic agents in their native conformations to the site of interest to enhance their antitumor activity. They can also be used as co-adjuvants that enhance the activity of IT effector cells. These nanoparticles can be engineered in the natural context of cell-derived extracellular vesicles (EVs) or exosomes or can be fully synthetic. In this review, a detailed SWOT analysis is done through the comparison of engineered-synthetic and naturaly-derived nanoparticles in terms of their current and future use in cancer immunotherapy.

Molecular Nanoinformatics Approach Assessing the Coating Oxcarbazepine (OXC) Drug on Silver Nanoparticles

Silver nanoparticles (AgNP) have gained significant attention due to their unique pharmacological properties. These nanoparticles have been found to possess antimicrobial, anti-inflammatory, and antioxidant activities, making them promising candidates for various medical applications. The coating characteristics of oxcarbazepine (OXC), a drug used in epilepsy treatment, on the AgNP icosahedral clusters were investigated using molecular dynamics (MD) simulations and noncovalent interactions (NCI) and Independent Gradient Model (IGM) analysis. We investigated the AgNP coating using OXC drug concentrations of 500, 1000, 1500, 2000, and 2500 ppm. Our results suggested that the OXC drug has a high potential interaction with the AgNP, especially when the concentration increases. Furthermore, it was observed that this interaction occurs mainly through the nitrogen atom (N1) of the OXC molecule, independent of concentration. Finally, the coating is more pronounced for high OXC concentrations. The weak interaction analysis indicated that the van der Waals interactions were observed between the OXC molecules and AgNP, resulting in relevant stability in these interactions. Therefore, our study may be helpful for experimental research groups to develop an oxcarbazepine drug delivery system using AgNP.

Harnessing the power of targeted metal nanocarriers mediated photodynamic and photothermal therapy

The treatment of cancer has become a profoundly intricate procedure. Traditional treatment methods, including chemotherapy, surgery and radiotherapy, have been utilized, while notable progress has been achieved in recent years. Among targeted therapies for cancer, folic acid (FA) conjugated metal-based nanoparticles (NP) have emerged as an innovative strategy, namely for photodynamic therapy (PDT) and photothermal therapy (PTT). These NP exploit the strong attraction between FA and folate receptors, which are excessively produced in several cancer cells, in order to enable precise administration and improved effectiveness of treatment. During PDT, metal-based NP functionalized with FA are used as photosensitizers which are activated by light, and produce reactive oxygen species that cause cancer cells to undergo apoptosis. Within the framework of PTT, these NP effectively transform light energy into concentrated heat, specifically targeting and destroying tumor cells. This review examines the fundamental mechanisms by which these NP improve the effectiveness of PDT and PTT while simultaneously presenting important findings that demonstrate the effectiveness of FA-functionalized MNP in laboratory and animal models. In addition, the paper also discusses the problems and potential directions for their clinical translation.

Exploring paraptosis as a therapeutic approach in cancer treatment

A variety of cell death pathways play critical roles in the onset and progression of multiple diseases. Paraptosis, a unique form of programmed cell death, has gained significant attention in recent years. Unlike apoptosis and necrosis, paraptosis is characterized by cytoplasmic vacuolization, swelling of the endoplasmic reticulum and mitochondria, and the absence of caspase activation. Numerous natural products, synthetic compounds, and newly launched nanomedicines have been demonstrated to prime cell death through the paraptotic program and may offer novel therapeutic strategies for cancer treatment. This review summarizes recent findings, delineates the intricate network of signaling pathways underlying paraptosis, and discusses the potential therapeutic implications of targeting paraptosis in cancer treatment. The aim of this review is to expand our understanding of this unique cell death process and explore the potential therapeutic implications of targeting paraptosis in cancer treatment.

Curcumin and nanodelivery systems: New directions for targeted therapy and diagnosis of breast cancer

As the global incidence of breast cancer continues to surge, the pursuit of novel, low-toxicity, and highly efficacious therapeutic strategies has emerged as a pivotal research focus. Curcumin (CUR), an active constituent of traditional Chinese medicine (TCM) renowned for its antimicrobial, anti-inflammatory, antioxidant, and antitumor properties, exhibits immense potential in breast cancer therapy. Nevertheless, CUR's poor water solubility, chemical instability, and unfavorable pharmacokinetics have impeded its clinical utilization. To address these challenges, nano-delivery systems have been extensively exploited for CUR administration, enhancing its in vivo stability and bioavailability, and facilitating precise targeting of breast cancer lesions. Therefore, we elaborate on CUR's chemical foundations, drug metabolism, and safety profile, and elucidate its potential mechanisms in breast cancer therapy, encompassing inducing apoptosis and autophagy, blocking cell cycle, inhibiting breast cancer metastasis, regulating tumor microenvironment and reversing chemotherapy resistance. The review primarily emphasizes recent advancements in CUR-based nano-delivery systems for the treatment and diagnosis of breast cancer. Liposomes, nanoparticles (encompassing polymer nanoparticles, solid lipid nanoparticles, mesoporous silica particles, metal/metal oxide nanoparticles, graphene nanomaterials, albumin nanoparticles, etc.), nanogels, and nanomicelles can serve as delivery carriers for CUR, exhibiting promising anti-breast cancer effects in both in vivo and in vitro experiments. Furthermore, nano-CUR can be integrated with fluorescence imaging, magnetic resonance imaging, computed tomography imaging, ultrasound, and other techniques to achieve precise localization and diagnosis of breast cancer masses. While this article has summarized the clinical studies of nano-curcumin, it is noteworthy that the research literature on nano-CUR applied to breast cancer diagnosis and the translation of nano-CUR clinical studies in BC patients remain limited. Therefore, future research should intensify exploration in this direction.

Support based metal incorporated layered nanomaterials for photocatalytic degradation of organic pollutants

An effective approach to producing sophisticated miniaturized and nanoscale materials involves arranging nanomaterials into layered hierarchical frameworks. Nanostructured layered materials are constructed to possess isolated propagation assets, massive surface areas, and envisioned amenities, making them suitable for a variety of established and novel applications. The utilization of various techniques to create nanostructures adorned with metal nanoparticles provides a secure alternative or reinforcement for the existing physicochemical methods. Supported metal nanoparticles are preferred due to their ease of recovery and usage. Researchers have extensively studied the catalytic properties of noble metal nanoparticles using various selective oxidation and hydrogenation procedures. Despite the numerous advantages of metal-based nanoparticles (NPs), their catalytic potential remains incompletely explored. This article examines metal-based nanomaterials that are supported by layers, and provides an analysis of their manufacturing, procedures, and synthesis. This study incorporates both 2D and 3D layered nanomaterials because of their distinctive layered architectures. This review focuses on the most common metal-supported nanocomposites and methodologies used for photocatalytic degradation of organic dyes employing layered nanomaterials. The comprehensive examination of biological and ecological cleaning and treatment techniques discussed in this article has paved the way for the exploration of cutting-edge technologies that can contribute to the establishment of a sustainable future.

SMI-Capsular Fibrosis and Biofilm Dynamics: Molecular Mechanisms, Clinical Implications, and Antimicrobial Approaches

Silicone mammary implants (SMIs) frequently result in capsular fibrosis, which is marked by the overproduction of fibrous tissue surrounding the implant. This review provides a detailed examination of the molecular and immunological mechanisms driving capsular fibrosis, focusing on the role of foreign body responses (FBRs) and microbial biofilm formation. We investigate how microbial adhesion to implant surfaces and biofilm development contribute to persistent inflammation and fibrotic responses. The review critically evaluates antimicrobial strategies, including preoperative antiseptic protocols and antimicrobial-impregnated materials, designed to mitigate infection and biofilm-related complications. Additionally, advancements in material science, such as surface modifications and antibiotic-impregnated meshes, are discussed for their potential to reduce capsular fibrosis and prevent contracture of the capsule. By integrating molecular insights with clinical applications, this review aims to elucidate the current understanding of SMI-related fibrotic responses and highlight knowledge gaps. The synthesis of these findings aims to guide future research directions of improved antimicrobial interventions and implant materials, ultimately advancing the management of capsular fibrosis and enhancing patient outcomes.

Au/Ag@polyoxometalate core-shell structures: from nanoparticles to atomically precise nanoclusters

This review summarizes the progress in the research on polyoxometalate (POM)-decorated gold (Au) and silver (Ag) core-shell structures (Au/Ag@POMs), emphasizing their substantial application potential in catalysis, medicine, and biology. It outlines the central strategies for fabricating Au/Ag@POMs with diverse morphologies and dimensions, leveraging POMs as protective ligands and reducing agents as well as for ligand exchange. Of particular note is the focus on the analysis of the nanoparticle size, shape, and intricate architecture of POM shells using cryo-electron microscopy techniques. By integrating recent findings on atomically precise POM-stabilized nanoclusters, this review delves deeper into understanding surface interface structures, intrinsic atomic architectures, and electronic interactions between POM shells and metallic cores. Collectively, advancements in this field underscore significant strides in the controllable synthesis and precise structural manipulation of Au/Ag@POM architectures, thus paving the way for engineering high-performance metal catalysts.

Synthesis and Application of Silver Nanoparticles for Caries Management: A Review

Silver nanoparticles have unique physical, chemical, and biological properties that make them attractive for medical applications. They have gained attention in dentistry for their potential use in caries management. This study reviews the different synthesis methods of silver nanoparticles and the application of them for caries management. Silver nanoparticles are tiny silver and are typically less than 100 nanometres in size. They have a high surface area-to-volume ratio, making them highly reactive and allowing them to interact with bacteria and other materials at the molecular level. Silver nanoparticles have low toxicity and biocompatibility. Researchers have employed various methods to synthesise silver nanoparticles, including chemical, physical, and biological methods. By controlling the process, silver nanoparticles have defined sizes, shapes, and surface properties for wide use. Silver nanoparticles exhibit strong antibacterial properties, capable of inhibiting a broad range of bacteria, including antibiotic-resistant strains. They inhibit the growth of cariogenic bacteria, such as Streptococcus mutans. They can disrupt bacterial cell membranes, interfere with enzyme activity, and inhibit bacterial replication. Silver nanoparticles can inhibit biofilm formation, reducing the risk of caries development. Additionally, nano silver fluoride prevents dental caries by promoting tooth remineralisation. They can interact with the tooth structure and enhance the deposition of hydroxyapatite, aiding in repairing early-stage carious lesions. Silver nanoparticles can also be incorporated into dental restorative materials such as composite resins and glass ionomer cements. The incorporation can enhance the material's antibacterial properties, reducing the risk of secondary caries and improving the longevity of the restoration.

A Comprehensive Review on the Importance of Sustainable Synthesized Coinage Metal Nanomaterials and Their Diverse Biomedical Applications

From a historical perspective, coinage metals (CMNMs) are most renowned for their monetary, ornamental, and metallurgical merits; nevertheless, as nanotechnology's potential has only just come to light, their metal nanostructures and uses may be viewed as products of modern science. Notable characteristics of CMNMs include visual, electrical, chemical, and catalytic qualities that depend on shape and size. Due diligence on the creation and synthesis of CMNMs and their possible uses has been greatly promoted by these characteristics. This review focuses on solution-based methods and provides an overview of the latest developments in CMNMs and their bimetallic nanostructures. It discusses a range of synthetic techniques, including conventional procedures and more modern approaches used to enhance functionality by successfully manipulating the CMNMs nanostructure's size, shape, and composition. To help with the design of new nanostructures with improved capabilities in the future, this study offers a brief assessment of the difficulties and potential future directions of these intriguing metal nanostructures. This review focuses on mechanisms and factors influencing the synthesis process, green synthesis, and sustainable synthesis methods. It also discusses the wide range of biological domains in which CMNMs are applied, including antibacterial, antifungal, and anticancer. Researchers will therefore find the appropriateness of both synthesizing and using CMNMS keeping in mind the different levels of environmental effects.

Natural antibiotics against antimicrobial resistance: sources and bioinspired delivery systems

The current burden associated to multidrug resistance, and the emerging superbugs, result in a decreased and even loss of antibiotic efficacy, which poses significant challenges in the treatment of infectious diseases. This situation has created a high demand for the discovery of novel antibiotics that are both effective and safe. However, while antibiotics play a crucial role in preventing and treating diseases, they are also associated with adverse effects. The emergence of multidrug-resistant and the extensive appearance of drug-resistant microorganisms, has become one of the major hurdles in healthcare. Addressing this problem will require the development of at least 20 new antibiotics by 2060. However, the process of designing new antibiotics is time-consuming. To overcome the spread of drug-resistant microbes and infections, constant evaluation of innovative methods and new molecules is essential. Research is actively exploring alternative strategies, such as combination therapies, new drug delivery systems, and the repurposing of existing drugs. In addition, advancements in genomic and proteomic technologies are aiding in the identification of potential new drug targets and the discovery of new antibiotic compounds. In this review, we explore new sources of natural antibiotics from plants, algae other sources, and propose innovative bioinspired delivery systems for their use as an approach to promoting responsible antibiotic use and mitigate the spread of drug-resistant microbes and infections.

Biosynthesis and characterization of gold nanoparticles from citrullus colocynthis (L.) schrad pulp ethanolic extract: Their cytotoxic, genotoxic, apoptotic, and antioxidant activities

The age-old discipline of plant therapy has gained renewed importance through the utilization of plants for the synthesis of metal nanoparticles. However, toxicity testing and characterization of the recently synthesized nanomaterials are essential to evaluating their appropriate application. Citrullus colocynthis is a medicinal plant with several health benefits. Herein, we used its ethanolic pulp extract (PE) to manufacture gold nanoparticles (PE-AuNPs). Various approaches were employed to assess the MTT50 and NR50 values of PE and PE-AuNPs at different concentrations in the human hepatocarcinoma cell line (HepG2). The study aimed to assess the genotoxic effects and in vivo toxicity of PE and PE-AuNPs at MTT50 dosages. The quasi-spherical, cubic/triangular prisms, and nail-looking particles exhibited no antioxidant properties. They had an absorbance peak between 540 and 560 nm, diameters of less than 20 nm, hydrodynamic diameters of 177.9 nm, and a negative surface charge (-10.3 mV). The significant role of plant phytochemicals in the formation of metal nanoparticles is confirmed by the diminished antioxidant capacity of extract residues following PE-AuNP synthesis. PE-AuNPs exhibited in vivo and cytotoxic effects at relatively lower concentrations compared to PE. In contrast to PE, PE-AuNPs exhibited lower genotoxic at MTT50 dosages. Despite having MTT50 values of approximately 1.95 ± 0.06 and 0.89 ± 0.03 mg/ml, PE and PE-AuNPs can still be considered biocompatible. Nonetheless, our results suggest that the characteristics of recently produced nanoparticles can differ from those of the matching plant. Further investigation can provide a better understanding of the possible therapeutic and pharmacological impacts of PE-AuNPs.

A Comprehensive Review of Silver and Gold Nanoparticles as Effective Antibacterial Agents

The increasing threat from antibiotic-resistant bacteria has necessitated the development of novel methods to counter bacterial infections. In this context, the application of metallic nanoparticles (NPs), especially gold (Au) and silver (Ag), has emerged as a promising strategy due to their remarkable antibacterial properties. This review examines research published between 2006 and 2023, focusing on leading journals in nanotechnology, materials science, and biomedical research. The primary applications explored are the efficacy of Ag and Au NPs as antibacterial agents, their synthesis methods, morphological properties, and mechanisms of action. An extensive review of the literature on NPs synthesis, morphology, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and effectiveness against various Gram(+/-) bacteria confirms the antibacterial efficacy of Au and Ag NPs. The synthesis methods and characteristics of NPs, such as size, shape, and surface charge, are crucial in determining their antibacterial activity, as these factors influence their interactions with bacterial cells. Furthermore, this review underscores the urgent necessity of standardizing synthesis techniques, MICs, and reporting protocols to enhance the comparability and reproducibility of future studies. Standardization is essential for ensuring the reliability of research findings and accelerating the clinical application of NP-based antimicrobial approaches. This review aims to propel NP-based antimicrobial strategies by elucidating the properties that enhance the antibacterial activity of Ag and Au NPs. By highlighting their inhibitory effects against various bacterial strains and relatively low cytotoxicity, this work positions Ag and Au NPs as promising materials for developing antibacterial agents, making a significant contribution to global efforts to combat antibiotic-resistant pathogens.

Electrospun nanofibrous wound dressings with enhanced efficiency through carbon quantum dots and citrate incorporation

Nanofibers show promise for wound healing by facilitating active agent delivery, moisture retention, and tissue regeneration. However, selecting suitable dressings for diverse wound types and managing varying exudate levels remains challenging. This study synthesized carbon quantum dots (CQDs) from citrate salt and thiourea using a hydrothermal method. The CQDs displayed antibacterial activity against Staphylococcus aureus and Escherichia coli. A nanoscaffold comprising gelatin, chitosan, and polycaprolactone (GCP) was synthesized and enhanced with silver nanoparticle-coated CQDs (Ag-CQDs) to form GCP-Q, while citrate addition yielded GCP-QC. Multiple analytical techniques, including electron microscopy, FT-IR spectroscopy, dynamic light scattering, UV-Vis, photoluminescence, X-ray diffraction, porosity, degradability, contact angle, and histopathology assessments characterized the CQDs and nanofibers. Integration of CQDs and citrate into the GCP nanofibers increased porosity, hydrophilicity, and degradability-properties favorable for wound healing. Hematoxylin and eosin staining showed accelerated wound closure with GCP-Q and GCP-QC compared to GCP alone. Overall, GCP-Q and GCP-QC nanofibers exhibit significant potential for skin tissue engineering applications.

In-Flight Tuning of Au-Sn Nanoparticle Properties

Multimetallic nanoparticles possess a variety of beneficial properties with potential relevance for various applications. These metallic nanoparticles can consist of randomly ordered alloys, which retain the properties of the constituting elements, or ordered intermetallics, which possess extended properties. Depending on the desired application, specific alloys or intermetallic compounds are required. However, it remains challenging to achieve particular morphologies, crystal structures, chemical compositions, and particle sizes because of the inherent complexity of nanoparticle synthesis. In this work, Au-Sn nanoparticles were synthesized using a continuous one-step gas-phase synthesis method that offers the possibility to anneal the nanoparticles in flight directly after generation to tune their properties. The bimetallic model system Au-Sn, comprising both alloys and intermetallic compounds, was studied in the temperature range of 300 to 1100 °C. The bimetallic Au/Sn ratio in the nanoparticles can be adjusted with in-flight annealing between 70/30 and 40/60 atomic %. While Au-rich alloys are obtained at lower temperatures, the increase in the annealing temperature leads to the formation of more Sn-rich intermetallic phases. Surface and size effects greatly influence particle morphologies and phase fractions. This research opens new opportunities for the synthesis of customized nanoparticles by temperature adjustment and particle size selection.

Theranostic scope of monometallic selenium and titanium dioxide nanoparticles in biomedicine: A review

The nanoparticles (NPs) of metals and metal oxides constitute significant components of technology in terms of monometallic NPs (MNPs). Over the last decade, the most fascinating and in-depth uses of NPs have been found in the biomedical field, which has demonstrated the therapeutic potential of these particles. Significant strides have been made in the application of nanotechnology across various industries, including biomedical sciences. In biomedicine, two of the most important applications of NPs are in the diagnosis and treatment of disease. Given their ability to deliver specific drugs, these next-generation NPs provide safe and effective pharmacotherapies for a wide range of disorders. Selenium nanoparticles (SeNPs) and titanium dioxide (TiO2) NPs offer potential treatments for various applications, including hair care and cancer treatment. SeNPs help with abiotic stress, plant disease, and growth, while TiO2 NPs enhance bio-imaging and drug delivery. This comprehensive review focuses on MNPs like Se (metal-based) and TiO2 (metal-oxide based). It covers their synthesis methods, nanoscale physicochemical properties, and the definition of specific industrial applications in various fields of applied nanotechnology, including biomedicine.

Nanoparticles and Airway Epithelial Cells: Exploring the Impacts and Methodologies in Toxicity Assessment

The production of nanoparticles has recently surged due to their varied applications in the biomedical, pharmaceutical, textile, and electronic sectors. However, this rapid increase in nanoparticle manufacturing has raised concerns about environmental pollution, particularly its potential adverse effects on human health. Among the various concerns, inhalation exposure to nanoparticles poses significant risks, especially affecting the respiratory system. Airway epithelial cells play a crucial role as the primary defense against inhaled particulate matter and pathogens. Studies have shown that nanoparticles can disrupt the airway epithelial barrier, triggering inflammatory responses, generating reactive oxygen species, and compromising cell viability. However, our understanding of how different types of nanoparticles specifically impact the airway epithelial barrier remains limited. Both in vitro cell culture and in vivo murine models are commonly utilized to investigate nanoparticle-induced cellular responses and barrier dysfunction. This review discusses the methodologies frequently employed to assess nanoparticle toxicity and barrier disruption. Furthermore, we analyze and compare the distinct effects of various nanoparticle types on the airway epithelial barrier. By elucidating the diverse responses elicited by different nanoparticles, we aim to provide insights that can guide future research endeavors in assessing and mitigating the potential risks associated with nanoparticle exposure.

Biohybrid materials comprising an artificial peroxidase and differently shaped gold nanoparticles

The immobilization of biocatalysts on inorganic supports allows the development of bio-nanohybrid materials with defined functional properties. Gold nanomaterials (AuNMs) are the main players in this field, due to their fascinating shape-dependent properties that account for their versatility. Even though incredible progress has been made in the preparation of AuNMs, few studies have been carried out to analyze the impact of particle morphology on the behavior of immobilized biocatalysts. Herein, the artificial peroxidase Fe(iii)-Mimochrome VI*a (FeMC6*a) was conjugated to two different anisotropic gold nanomaterials, nanorods (AuNRs) and triangular nanoprisms (AuNTs), to investigate how the properties of the nanosupport can affect the functional behavior of FeMC6*a. The conjugation of FeMC6*a to AuNMs was performed by a click-chemistry approach, using FeMC6*a modified with pegylated aza-dibenzocyclooctyne (FeMC6*a-PEG4@DBCO), which was allowed to react with azide-functionalized AuNRs and AuNTs, synthesized from citrate-capped AuNMs. To this end, a literature protocol for depleting CTAB from AuNRs was herein reported for the first time to prepare citrate-AuNTs. The overall results suggest that the nanomaterial shape influences the nanoconjugate functional properties. Besides giving new insights into the effect of the surfaces on the artificial peroxidase properties, these results open up the way for creating novel nanostructures with potential applications in the field of sensing devices.

Recent Trends in Biologically Synthesized Metal Nanoparticles and their Biomedical Applications: a Review

In recent years, biologically synthesized metal nanoparticles have emerged as a dynamic field of research with significant implications for biomedical applications. This review explores the latest trends in the synthesis of metal nanoparticles using biological methods, encompassing plant extracts and microorganisms such as bacteria, yeasts, and fungi. These innovative approaches offer a sustainable, cost-effective, and environmentally friendly alternative to conventional chemical synthesis methods. Moreover, this review delves into the multifaceted biomedical applications of biologically synthesized metal nanoparticles. These applications include drug delivery systems, diagnostics, therapeutics, and imaging technologies, showcasing the versatility and promise of these nanomaterials in addressing contemporary biomedical challenges. In addition, the review addresses the critical issue of cytotoxicity, offering insights into the safety and viability of these biologically derived NPs for medical use. The exploration of recent trends and advancements in this field underscores the transformative potential of biologically synthesized metal nanoparticles in revolutionizing biomedical research and healthcare.

Green-Synthesized Characterization, Antioxidant and Antibacterial Applications of CtAC/MNPs-Ag Nanocomposites

The emergence of antibiotic resistance, caused by the improper use of antibiotics, is a significant challenge in combating infectious diseases, leading to millions of annual fatalities. The occurrence of antimicrobial side effects catalyzes the investigation of novel antimicrobial compounds and sources of drugs. Consequently, the research on biological activity that is conducted on plants, plant extracts, and compounds that are produced from plant components is of utmost significance. In this study, CtAC/MNPs were obtained by the reaction of activated carbon (AC) obtained from the fruits of the Celtis tournefortii (Ct) plant and magnetic nanoparticles (MNPs), and a CtAC/MNPs-Ag nanocomposite was synthesized by the reduction in silver ions added to the reaction. The synthesized CtAC/MNPs and CtAC/MNPs-Ag nanocomposites were analyzed spectroscopically (FTIR, XRD), microscopically (SEM, EDX), optically (DLS), electrochemically (zeta potential) and magnetically (VSM). The antibacterial activities of CtAC/MNPs and CtAC/MNPs-Ag nanocomposites against S. aureus and E. coli were investigated by microdilution method using minimal inhibitory concentration (MIC) and disk diffusion methods. Antioxidant activity study, including total phenolic content and DPPH and cuprac assays, revealed the remarkable effect of the CtAC/MNPs-Ag nanocomposite. This study has the advantages of obtaining CtAC/MNPs and CtAC/MNPs-Ag nanocomposites in a short time without requiring energy, and most importantly, the reaction takes place without using any toxic substances. In addition, according to the data obtained in the study, the CtAC/MNPs-Ag nanocomposite is thought to shed light on biomedical research.

The antimicrobial activity of tea tree oil (Melaleuca alternifolia) and its metal nanoparticles in oral bacteria

Tea tree (Melaleuca alternifolia) oil (TTO) is an antimicrobial agent, and hence, its use in fabricating nanoparticles (NP) may be useful in providing more efficacious antimicrobial agents. The current research aimed to test the antimicrobial efficacy of TTO and its TTO-Metal-NPs against oral microbes: Porphyromonas gingivalis, Enterococcus faecalis, and Streptococcus mutans. The antimicrobial activity of TTO and zinc (Zn) and iron (Fe) nanoparticles (NPs) and the combined effects of antimicrobial agents were investigated using agar well diffusion assays. Fourier-transform infrared spectroscopy (FT-IR) was used to identify the phyto-constituents of TTO. Field emission scanning electron microscopy (FE-SEM), dynamic light scatter (DLS), and zeta potential were utilized to analyze the biogenic nanoparticles' morphology, size, and potential. The antimicrobial mode of action was determined by assessing the morphological changes under scanning electron microscopy (SEM). The TTO extracts converted Zn and Fe ions to NPs, having an average size of 97.50 (ZnNPs) and 102.4 nm (FeNPs). All tested agents had significant antibacterial efficacy against the tested oral microbes. However, the TTO extract was more efficacious than the NPs. Combination treatment of TTO with antibiotics resulted in partial additive effects against P. gingivalis and partial antagonistic effects against E. faecalis, S. mutans, and common mouthwashes (Oral B and chlorhexidine). TTO and NP-treated bacteria underwent morphological changes on treatment. M. alternifolia phytochemicals could be useful for further research and development of antimicrobial NPs. The current study highlights the variance in activity observed for different types of bacteria and antagonistic effects seen with common mouthwashes, which represent a threat to therapeutic efficacy and heighten the risk of clinical microbial resistance.

Formulation and Characterization of New Experimental Dental Composites with Zirconium Filling in Different Forms

Short glass fibers are generally used in posterior dental restorations to enhance the mechanical properties and improve the material microstructure. Two resin-based composites (S0 and SF) were formulated and characterized to investigate the influence of zirconium in their characteristics and properties. The organic part of the investigated materials was the same (BisGMA, TEGDMA, and a photochemical polymerization system), and in the inorganic part, besides quart, glassA, and hydroxylapatite with Zn, sample S0 contained strontium glass with zirconium and sample SF contained fiber powder of chopped zirconium. The samples were characterized by the degree of conversion (DC), mechanical properties, water sorption (WS), scanning electron microscopy (SEM), atomic force microscopy (AFM) before and after the WS test, and antimicrobial properties. The results obtained were subjected to one-way ANOVA and Tukey's statistical tests. Both samples had a high DC. Regarding the mechanical properties, both samples were very similar, except DTS, which was higher for the composite without fibers. After 14 days, the WS value of the SF sample was lower than that of the S0 sample. Water caused significant changes in the topography of the SF sample, but thanks to its antimicrobial properties and the diffusion phenomenon, SF had a more pronounced antimicrobial effect. This study shows that the addition of appropriate amounts of Sr-Zr-glass powder gives the material in which it is added similar properties to material containing chopped zirconium glass fiber powder. According to the antimicrobial test results, resin composites containing experimental zirconia fillings can be considered in future in vitro clinical studies for posterior reconstructions with significantly improved mechanical properties.

One-Pot Synthesis of Luminescent and Photothermal Carbon Boron-Nitride Quantum Dots Exhibiting Cell Damage Protective Effects

Zero-dimensional boron nitride quantum dots (BNQDs) are arousing interest for their versatile optical, chemical, and biochemical properties. Introducing carbon contents in BNQDs nanostructures is a great challenge to modulate their physicochemical properties. Among the carbon moieties, phenolic groups have attracted attention for their biochemical properties and phenol-containing nanomaterials are showing great promise for biomedical applications. Herein, the first example of direct synthesis of water dispersible BNQDs exposing phenolic and carboxylic groups is presented. The carbon-BNQDs are prepared in a single-step by solvent-assisted reaction of urea with boronic reagents and are characterized by optical absorption, luminescence, Raman, Fourier transform infrared and NMR spectroscopy, X-ray photoelectron spectroscopy, dynamic light scattering, and atomic force microscopy. The carbon-BNQDs exhibit nanodimension, stability, high photothermal conversion efficiency, pH-responsive luminescence and Z-potential. The potential of the carbon-BNQDs to provide photothermal materials in solid by embedding in agarose substrate is successfully investigated. The carbon-BNQDs exhibit biocompatibility on colorectal adenocarcinoma cells (Caco-2) and protective effects from chemical and oxidative stress on Caco-2, osteosarcoma (MG-63), and microglial (HMC-3) cells. Amplicon mRNA-seq analyses for the expression of 56 genes involve in oxidative-stress and inflammation are performed to evaluate the molecular events responsible for the cell protective effects of the carbon-BNQDs.

A bacterial cellulose/polyvinyl alcohol/nitro graphene oxide double layer network hydrogel efficiency antibacterial and promotes wound healing

In this study, graphene oxide (GO) was chemically modified utilizing concentrated nitric acid to produce a nitrated graphene oxide derivative (NGO) with enhanced oxidation level, improved dispersibility, and increased antibacterial activity. A double-layer composite hydrogel material (BC/PVA/NGO) with a core-shell structure was fabricated by utilizing bacterial cellulose (BC) and polyvinyl alcohol (PVA) binary composite hydrogel scaffold as the inner network template, and hydrophilic polymer (PVA) loaded with antibacterial material (NGO) as the outer network. The fabrication process involved physical crosslinking based on repeated freezing and thawing. The resulting BC/PVA/NGO hydrogel exhibited a porous structure, favorable mechanical properties, antibacterial efficacy, and biocompatibility. Subsequently, the performance of BC/PVA/NGO hydrogel in promoting wound healing was evaluated using a mouse skin injury model. The findings demonstrated that the BC/PVA/NGO hydrogel treatment group facilitated improved wound healing in the mouse skin injury model compared to the control group and the BC/PVA group. This enhanced wound healing capability was attributed primarily to the excellent antibacterial and tissue repair properties of the BC/PVA/NGO hydrogel.

Nanomaterials in Drug Delivery: Strengths and Opportunities in Medicine

There is a myriad of diseases that plague the world ranging from infectious, cancer and other chronic diseases with varying interventions. However, the dynamism of causative agents of infectious diseases and incessant mutations accompanying other forms of chronic diseases like cancer, have worsened the treatment outcomes. These factors often lead to treatment failure via different drug resistance mechanisms. More so, the cost of developing newer drugs is huge. This underscores the need for a paradigm shift in the drug delivery approach in order to achieve desired treatment outcomes. There is intensified research in nanomedicine, which has shown promises in improving the therapeutic outcome of drugs at preclinical stages with increased efficacy and reduced toxicity. Regardless of the huge benefits of nanotechnology in drug delivery, challenges such as regulatory approval, scalability, cost implication and potential toxicity must be addressed via streamlining of regulatory hurdles and increased research funding. In conclusion, the idea of nanotechnology in drug delivery holds immense promise for optimizing therapeutic outcomes. This work presents opportunities to revolutionize treatment strategies, providing expert opinions on translating the huge amount of research in nanomedicine into clinical benefits for patients with resistant infections and cancer.

Biogenic Ag-doped ZnO nanostructures induced cytotoxicity in luminal A and triple-negative human breast cancer cells

Aim: To evaluate the apoptosis-inducing properties of undoped and silver-doped-zinc-oxide nanoparticles (SDZONs) synthesized using Boswellia serrata against MCF-7 (Luminal-A) and MDA-MB-231 (Triple-negative) breast cancer cell lines.Methodology: Nanostructures were developed by facile biohydrothermal method and characterized by x-ray diffraction (XRD), Fourier transform infrared (FTIR), and high resolution transmission electron microscopy (HR-TEM). The comparative effect of doping and dose concentration of nanostructures on cytotoxicity was measured using MTT and trypan-blue-exclusion assay.Results: SDZONs exhibited greater cytotoxicity (20.71%, 27.31% cell viability) as compared with undoped nanostructures (35.81%, 37.08% cell viability) against MCF 7 and MDA-MB-231, respectively.Conclusion: The activity of biogenic nanostructures was highly dependent on doping, dose, and type of cell lines used. The novel biogenic SDZONs could be exploited as a promising, cost-effective, and environmentally benign strategy to curb breast cancer.

Advances in conductive hydrogels for neural recording and stimulation

The brain-computer interface (BCI) allows the human or animal brain to directly interact with the external environment through the neural interfaces, thus playing the role of monitoring, protecting, improving/restoring, enhancing, and replacing. Recording electrophysiological information such as brain neural signals is of great importance in health monitoring and disease diagnosis. According to the electrode position, it can be divided into non-implantable, semi-implantable, and implantable. Among them, implantable neural electrodes can obtain the highest-quality electrophysiological information, so they have the most promising application. However, due to the chemo-mechanical mismatch between devices and tissues, the adverse foreign body response and performance loss over time seriously restrict the development and application of implantable neural electrodes. Given the challenges, conductive hydrogel-based neural electrodes have recently attracted much attention, owing to many advantages such as good mechanical match with the native tissues, negligible foreign body response, and minimal signal attenuation. This review mainly focuses on the current development of conductive hydrogels as a biocompatible framework for neural tissue and conductivity-supporting substrates for the transmission of electrical signals of neural tissue to speed up electrical regeneration and their applications in neural sensing and recording as well as stimulation.

Biodegradable hafnium-doped CaCO3 nanoparticles as a dual-modality radiosensitizer for cancer radiotherapy

Aim: Radiotherapy employs high-energy ionizing radiation to inflict DNA damage on cancer cells, thereby causing their demise. However, this procedure can inadvertently harm healthy tissue. Thus, this study aimed to develop biodegradable radiosensitizers that counteract these adverse effects by enhancing the radiation sensitivity of tumor cells and safeguarding normal cells.Materials & methods: A biodegradable radiosensitizer was engineered by incorporating hafnium ions (Hf) into calcium carbonate (CaCO3) nanoparticles via a chemical precipitation technique, resulting in the formation of Hf:CaCO3 nanoparticles.Results & conclusion: Our findings demonstrate that Hf:CaCO3 nanoparticles exhibit pH-dependent solubility and can augment the efficacy of radiotherapy in treating cancer cells. This research underscores the potential of Hf:CaCO3 nanoparticles as a dual-modality radiosensitizer in radiotherapy.

The Role of Nanomedicine in Benign Gynecologic Disorders

Nanomedicine has revolutionized drug delivery in the last two decades. Nanoparticles appear to be a promising drug delivery platform in the treatment of various gynecological disorders including uterine leiomyoma, endometriosis, polycystic ovarian syndrome (PCOS), and menopause. Nanoparticles are tiny (mean size < 1000 nm), biodegradable, biocompatible, non-toxic, safe, and relatively inexpensive materials commonly used in imaging and the drug delivery of various therapeutics, such as chemotherapeutics, small molecule inhibitors, immune mediators, protein peptides and non-coding RNA. We performed a literature review of published studies to examine the role of nanoparticles in treating uterine leiomyoma, endometriosis, PCOS, and menopause. In uterine leiomyoma, nanoparticles containing 2-methoxyestradiole and simvastatin, promising uterine fibroid treatments, have been effective in significantly inhibiting tumor growth compared to controls in in vivo mouse models with patient-derived leiomyoma xenografts. Nanoparticles have also shown efficacy in delivering magnetic hyperthermia to ablate endometriotic tissue. Moreover, nanoparticles can be used to deliver hormones and have shown efficacy as a mechanism for transdermal hormone replacement therapy in individuals with menopause. In this review, we aim to summarize research findings and report the efficacy of nanoparticles and nanotherapeutics in the treatment of various benign gynecologic conditions.

A comprehensive review on the biomedical frontiers of nanowire applications

This comprehensive review examines the immense capacity of nanowires, nanostructures characterized by unbounded dimensions, to profoundly transform the field of biomedicine. Nanowires, which are created by combining several materials using techniques such as electrospinning and vapor deposition, possess distinct mechanical, optical, and electrical properties. As a result, they are well-suited for use in nanoscale electronic devices, drug delivery systems, chemical sensors, and other applications. The utilization of techniques such as the vapor-liquid-solid (VLS) approach and template-assisted approaches enables the achievement of precision in synthesis. This precision allows for the customization of characteristics, which in turn enables the capability of intracellular sensing and accurate drug administration. Nanowires exhibit potential in biomedical imaging, neural interfacing, and tissue engineering, despite obstacles related to biocompatibility and scalable manufacturing. They possess multifunctional capabilities that have the potential to greatly influence the intersection of nanotechnology and healthcare. Surmounting present obstacles has the potential to unleash the complete capabilities of nanowires, leading to significant improvements in diagnostics, biosensing, regenerative medicine, and next-generation point-of-care medicines.

An effective antibiofilm strategy based on bacteriophages armed with silver nanoparticles

The emerging antibiotic resistance in pathogenic bacteria is a key problem in modern medicine that has led to a search for novel therapeutic strategies. A potential approach for managing such bacteria involves the use of their natural killers, namely lytic bacteriophages. Another effective method involves the use of metal nanoparticles with antimicrobial properties. However, the use of lytic phages armed with nanoparticles as an effective antimicrobial strategy, particularly with respect to biofilms, remains unexplored. Here, we show that T7 phages armed with silver nanoparticles exhibit greater efficacy in terms of controlling bacterial biofilm, compared with phages or nanoparticles alone. We initially identified a novel silver nanoparticle-binding peptide, then constructed T7 phages that successfully displayed the peptide on the outer surface of the viral head. These recombinant, AgNP-binding phages could effectively eradicate bacterial biofilm, even when used at low concentrations. Additionally, when used at concentrations that could eradicate bacterial biofilm, T7 phages armed with silver nanoparticles were not toxic to eukaryotic cells. Our results show that the novel combination of lytic phages with phage-bound silver nanoparticles is an effective, synergistic and safe strategy for the treatment of bacterial biofilms.

Green synthesis, characterization and applications of Phyllanthus emblica fruit extract mediated chromium oxide nanoparticles

The green synthesis of metallic nanoparticles is attributable towards diverse applications in various fields, recently. In this research, we report simple and eco-friendly synthesis of chromium oxide (Cr2O3) nanoparticles using the fruit extract of Phyllanthus emblica as a reducing and capping agent. The absorbance peaks at 350 nm and 450 nm validated the nanoparticle formation in UV-visible spectrum. FTIR spectrum revealed the nature of functional groups. The crystalline properties of nanoparticles were ascertained by XRD analysis. EDX spectrum corroborated the elemental composition of nanoparticles in which chromium and oxygen constituted 68% of total weight. SEM images demonstrated agglomeration of nanoparticles resulting in the formation of large irregularly shaped flakes. Cr2O3 nanoparticles demonstrated excellent antimicrobial properties against 11 bacterial isolates and 1 fungal isolate. The largest inhibition zone (53 mm) was measured against A. baumannii while the smallest inhibition zone (26 mm) was recorded against S. aureus. Minimum inhibitory concentration (MIC) values were < 1 µg/ml for all microbes. However, the synthesized nanoparticles did not reveal synergism with any of the selected antibiotics (FICI values > 1). Nanoparticles possessed potent anti-biofilm powers with maximum (77%) inhibition of E. coli biofilms and minimum (45%) inhibition of S. enterica biofilms. Photocatalytic activity of Cr2O3 nanoparticles was evaluated to determine their efficacy in environmental bioremediation. Outcomes demonstrated degradation of methyl red (84%) but not of methylene blue dye. Furthermore, the Cr2O3 nanoparticles displayed considerable antioxidant (43%) as well as anti-inflammatory (44%) potentials. Hence, the present study accounts for the versatile applications of P. emblica-mediated Cr2O3 nanoparticles which could be pursued for future biomedical and environmental applications.

Oxidative stress and potential effects of metal nanoparticles: A review of biocompatibility and toxicity concerns

Metal nanoparticles (M-NPs) have garnered significant attention due to their unique properties, driving diverse applications across packaging, biomedicine, electronics, and environmental remediation. However, the potential health risks associated with M-NPs must not be disregarded. M-NPs' ability to accumulate in organs and traverse the blood-brain barrier poses potential health threats to animals, humans, and the environment. The interaction between M-NPs and various cellular components, including DNA, multiple proteins, and mitochondria, triggers the production of reactive oxygen species (ROS), influencing several cellular activities. These interactions have been linked to various effects, such as protein alterations, the buildup of M-NPs in the Golgi apparatus, heightened lysosomal hydrolases, mitochondrial dysfunction, apoptosis, cell membrane impairment, cytoplasmic disruption, and fluctuations in ATP levels. Despite the evident advantages M-NPs offer in diverse applications, gaps in understanding their biocompatibility and toxicity necessitate further research. This review provides an updated assessment of M-NPs' pros and cons across different applications, emphasizing associated hazards and potential toxicity. To ensure the responsible and safe use of M-NPs, comprehensive research is conducted to fully grasp the potential impact of these nanoparticles on both human health and the environment. By delving into their intricate interactions with biological systems, we can navigate the delicate balance between harnessing the benefits of M-NPs and minimizing potential risks. Further exploration will pave the way for informed decision-making, leading to the conscientious development of these nanomaterials and safeguarding the well-being of society and the environment.

Antipathogenic Efficacy of Biogenic Silver Nanoparticles and Antibiofilm Activities Against Multi-drug-Resistant ESKAPE Pathogens

The silver nanoparticles (AgNPs) were produced by employing a biogenic loom and tested for antipathogenic assets against multi-drug-resistant (MDR) ESKAPE bacteria. Biogenically synthesized AgNPs were characterized adopting various high-throughput techniques such as UHRTEM, SEM with EDX, DLS, TGA-DTA, and XRD and spectroscopic analysis showed polydispersion of nanoparticles. In this context, AgNPs with the attribute of spherical-shaped nanoparticles with an average size of 26 nm were successfully synthesized utilizing bacterial supernatant. The antipathogenic activities of AgNPs were assessed against 11 strains of MDR ESKAPE bacteria including Enterococcus faecium; methicillin-resistant Staphylococcus aureus; Klebsiella pneumonia; Acinetobacter baumannii; Pseudomonas aeruginosa; Enterobacter aerogenes; and Enterobacter species. The exposure of biogenic AgNPs in a well diffusion assay showed all the growth inhibitions of ESKAPE bacteria at 200 μg/ml after 18 h of incubation. Growth kinetics demonstrated maximum killing at 60 μg/ml after 4 h of completion. The highest biofilm depletions were found at 100 μg/ml in adhesion assay. Live/dead assays showed effective killing of the ESKAPE bacteria at 10 μg/ml in pre-existing biofilms. The effective inhibitory concentrations of AgNPs were investigated ranging from 10 to 200 μg/ml. The selected pathogens found sensitive to AgNPs are statistically significant (P < 0.05) than that of cefotaxime/AgNO3. Consequently, a broad spectrum of antimicrobial potentials of AgNPs can be alternative to conventional antimicrobial agents for future medicine.