Miniaturized NIR Spectroscopy in Food Analysis and Quality Control: Promises, Challenges, and Perspectives

A general deep learning model for predicting and classifying pea protein content via visible and near-infrared spectroscopy

Rapid and accurate detection of pea protein content is crucial for breeding and ensuring food quality. This study introduces the PeaNet model, which employs an improved convolutional neural network architecture to predict and classify pea protein content. The model was developed using 156 visible and near-infrared spectral datasets from 52 varieties cultivated under varied conditions. The data were preprocessed with Savitzky-Golay smoothing and multiplicative scatter correction to improve quality. The results revealed that the model achieved an R2 of 0.84 for predicting protein content and a classification accuracy of 85.33 % on the test set. On an independent validation set comprising different pea varieties, the model maintained an R2 above 0.80 and a classification accuracy of 83.33 %. It significantly outperformed traditional machine learning models and conventional deep learning architectures. This study introduces a universal, accurate, and efficient method for detecting pea protein content, thereby advancing food nutrition assessment and quality control.

Benchtop and different miniaturized near-infrared spectrometers application study: Calibration transfer and 2D-COS for in-situ analysis of moisture content in HPMC

The demand for miniaturized near-infrared (NIR) spectrometers has surged due to their potential for in-situ analysis. However, their predictive accuracy has not yet matched that of traditional benchtop instruments. This study evaluates the effectiveness of rapid quantitative moisture analysis in hydroxypropyl methylcellulose (HPMC) using a benchtop spectrometer, Antaris II from Thermo Fisher Scientific Inc., and five miniaturized spectrometers (MicroNIR 1700 from Viavi Solutions, OTO-SW2540 from OtOPhotonics, IAS DLP 1700 from Dallas, NIRONE Sensor 2.2 from Helsinki, and NIRS M1800 from Alian Optoelectronics). This study employed an Improved Principal Component Analysis (IPCA) transfer method to standardize spectra from the diverse miniaturized NIR spectrometers, facilitating calibration transfer across different spectroscopic technologies. The benchtop (Antaris II) delivered the most superior results, indicating that miniaturized spectrometers must refine their methodologies to approach the predictive performance of benchtop counterparts. Further, this work conducted a two-dimensional correlation spectroscopy (2D-COS) analysis on the spectra from various spectrometers. This analysis bolstered the partial least squares regression (PLSR) model, highlighting discrepancies between miniaturized and benchtop spectrometers and deepening understanding of the factors influencing the PLSR models. The IPCA leverages the benchtop model to enhance the precision and reliability of miniaturized NIR spectrometers. This innovative and versatile research approach aims to further optimize the performance of miniaturized NIR spectrometers for specific applications, representing a significant step forward in their development.

Evaluation and categorization of various pea cultivars utilizing near-infrared spectroscopy in conjunction with multivariate statistical techniques

The swift detection of allergenic protein and other nutritional indicators in pea protein is crucial for food and breeding efforts, facilitating the targeted selection of specific pea varieties and the advancement and processing of healthful foods. Using near-infrared (NIR) spectroscopy, spectral data for different pea varieties in the range of 908-1676 nm were collected, which were subsequently integrated with chemical values obtained by conventional methods. Multivariate statistical analysis was employed to optimize, develop, and validate the model for the spectral data. The correlation coefficients of the calibration set based on partial least squares regression (PLSR) models ranged from 0.74 to 0.99, while those of the validation set ranged from 0.20 to 0.99. This study offers a precise and straightforward approach for evaluating the levels of several nutritional indicators, including allergenic proteins in peas, and for classifying different types.

Near-infrared spectroscopy: application in ensuring food quality and safety

In recent years, the demand for intelligent control of food quality during processing has been increasing in the food industry. As a practical analytical tool, near-infrared (NIR) spectroscopy has become a common detection method to ensure food quality and safety because of its advantages of continuous, rapid on-line determination and strong analytical performance. In the past 20 years, many attempts and research studies have been conducted on the applications of NIR spectroscopy. Based on this, this review focuses on the specific application of near-infrared technology in the field of food, highlighting its breakthrough and applicability. NIR spectroscopy is widely used for online quantitative analysis of beneficial food components to the human body, which include proteins, polysaccharides, and polyphenols. Additionally, this technology is applied to food microbiological analysis, food safety detection (such as food adulteration), and food origin prediction. This review discusses the existing challenges, future development directions, and opportunities for NIR spectroscopy technology.

Monitoring the homemade fermentation of readymade malt extract using the SCiO NIR sensor: A convergence of technology and tradition

Miniaturized near-infrared (NIR) instruments are launched on the market to satisfy the need of both researchers and consumers for quick ways of analysing stuff, especially in the food field. Their portability and ease of operation are at the centre of the "do-it-yourself" idea behind providing virtually anyone with the ability of making analytical measurements on their own. In this study, we highlighted the convergence of technology and tradition in two seemingly disparate domains: spectroscopy and homebrewing. Homebrewing is in fact a leisure activity which conceptually shares the do-it-yourself approach: the consumer becomes the producer of his/her own beer. Hence, in our study, we investigated the analytical possibilities provided by a handheld NIR spectrometer to monitor the homemade fermentation process of a commercial malt extract, over the course of one week. The spectroscopic data, acquired using the SCiO sensor (Consumer Physics), were analysed via Principal Component Analysis (PCA) to investigate temporal trends and relationships with brewing parameters. Our findings reveal that discernible trends, reflective of brewing stage progression and temperature variations, can be captured and unveiled with simple data analysis approaches. At the same time, the detection of scattering effects that can be attributed to bubble formation on the spectrometer's acquisition window confirm the need for robust and reasoned experimental procedures, but also for proper data preprocessing methods. This rather simple and basic analytical approach could provide the homebrewer the possibility to qualitatively monitor the advancement of the brewing process.

High-throughput near-infrared spectroscopy for detection of major components and quality grading of peas

Pea (Pisum sativum L.) is a nutrient-dense legume whose nutritional indicators influence its functional qualities. Traditional methods to identify these components and examine the relationships between their contents could be more laborious, hindering the quality assessment of the varieties of peas. This study conducted a statistical analysis of data about the sensory and physicochemical nutritional attributes of peas acquired using traditional techniques. Additionally, 90 sets of spectral data were obtained using a portable near-infrared spectrometer, which were then integrated with chemical values to create a near-infrared model for the basic ingredient content of peas. The correlation analysis revealed significant findings: pea starch displayed a substantial negative correlation with moisture, crude fiber, and crude protein, while showing a highly significant positive correlation with pea seed thickness. Furthermore, pea protein exhibited a significant positive correlation with crude fiber and crude fat. Cluster analysis classified all pea varieties into three distinct groups, successfully distinguishing those with elevated protein content, high starch content, and low-fat content. The combined contribution of PC1 and PC2 in the principal component analysis (PCA) was 51.2%. Partial least squares regression (PLSR) and other spectral preprocessing methods improved the predictive model, which performed well with an external dataset, with calibration coefficients of 0.89-0.99 and prediction coefficients of 0.71-0.88. This method enables growers and processors to efficiently analyze the composition of peas and evaluate crop quality, thereby enhancing food industry development.

Rapid on-site analysis of soil microplastics using miniaturized NIR spectrometers: Key aspect of instrumental variation

Contamination by microplastics, a global environmental concern, demands effective monitoring. While current methods focus on characterizing the smallest particles, their low throughput hinders practical assessment. Miniaturized near-infrared (NIR) spectroscopy offers high-throughput capabilities and rapid on-site analysis, potentially filling this gap. However, diverse sensor characteristics result in significant differences among handheld NIR spectrometers. This study characterizes the analytical performance of these instruments for identifying soil microplastics, comparing miniaturized devices MicroNIR 1700ES, NeoSpectra Scanner, microPHAZIR, nanoFTIR-NIR, NIR-S-G1, and SCiO sensor against a reference benchtop instrument, the NIRFlex N-500. Detection of common polymers, ABS, EVAC, HDPE, LDPE, PA6, PMMA, POM, PET, PS, PTFE, and SBR, at low concentrations (0.75 % w/w) was possible without sample preparation. Sensor selection proved crucial; FT instruments N-500 and NeoSpectra Scanner provided the most accurate analysis, while other handheld instruments faced various challenges. Covariance analysis, Principal Component Analysis (PCA), and mid-level data fusion revealed that miniaturized NIR spectrometers can successfully screen microplastics on-site. However, the ability of each sensor to discriminate certain groups of polymers strongly depends on its spectral characteristics. This study demonstrates the importance of sensor selection in the development of portable NIR spectroscopy for environmental monitoring of microplastics.

Study on hyaluronic acid aquaphotomics-from one dimension to two dimension analysis

Hyaluronic acid (HA) is widely used in cosmetics because of its unique hygroscopic properties. However, it is difficult to characterize the interactions between HA and water molecules in the skin. In this study, we developed a fast and nondestructive method for visualizing skin water species based on aquaphotomics to elucidate the mechanism by which HA affected water species. The first HA-water system was introduced to investigate the relationship between HA and water species based on near-infrared (NIR) spectroscopy and aquaphotomics. NIR-hyperspectral imaging was then applied to characterize the distribution of different water species in the skin. The HA-water system results indicated that oligo HA had hydration behaviors opposite to those of low molecular weight HA. NIR hyperspectral imaging results showed that the intensity and spatial distribution of each water species within the skin model can be directly characterized by upgrading aquaphotomics from one-dimensional to two-dimensional. Studies showed that HA tetrasaccharides and 600-700 k Da HA could maintain the strength of skin water species. In summary, the visual representation of water species distribution enables rapid and nondestructive monitoring of macromolecule hydration with skin which could help cosmetics formulators to optimize their HA formulation to realize their best hygroscopic properties in the future.

Density Functional Theory Calculations and Infrared Spectral Analysis of Lignin

Lignin is one of the building blocks of plant cell walls, and the study of the spectral characterization of its cleavage process can help to monitor the production and reuse of straw after decay. In this paper, four theoretical model structures of lignin formed by lignin G monomers and connected by β-O-4 bonding type were optimized and calculated based on the density functional theory using the B3LYP/3-21g and B3LYP/6-311g basis sets. The results showed that the theoretical infrared spectra of lignin increased sequentially in the absorption peaks of 1500 cm-1 blue shift and 2932 cm-1 and 1200 cm-1 red shift, while the latter three theoretical models showed new infrared absorption peaks of 716 cm-1 and 823 cm-1 due to the presence of the β-O-4 structure, which is of great value for the theoretical spectral study of organic macromolecules and also provides data support for the spectral change in lignin in the degradation of graminaceous plants.

Handheld NIR Spectroscopy Combined with a Hybrid LDA-SVM Model for Fast Classification of Retail Milk

The EU market offers different types of milk, distinguished by origin, production method, processing technology, fat content, and other characteristics, which are often detailed on product labels. In this context, ensuring the authenticity of milk is crucial for maintaining standards and preventing fraud. Various food authenticity techniques have been employed to achieve this. Among them, near-infrared (NIR) spectroscopy is valued for its non-destructive and rapid analysis capabilities. This study evaluates the effectiveness of a miniaturized NIR device combined with support vector machine (SVM) algorithms and LDA feature selection to discriminate between four commercial milk types: high-quality fresh milk, milk labeled as mountain product, extended shelf-life milk, and TSG hay milk. The results indicate that NIR spectroscopy can effectively classify milk based on the type of milk, relying on different production systems and heat treatments (pasteurization). This capability was greater in distinguishing high-quality mountain and hay milk from the other types, while resulting in less successful class assignment for extended shelf-life milk. This study demonstrated the potential of portable NIR spectroscopy for real-time and cost-effective milk authentication at the retail level.

Rapid Classification of Sugarcane Nodes and Internodes Using Near-Infrared Spectroscopy and Machine Learning Techniques

Accurate and rapid discrimination between nodes and internodes in sugarcane is vital for automating planting processes, particularly for minimizing bud damage and optimizing planting material quality. This study investigates the potential of visible-shortwave near-infrared (Vis-SWNIR) spectroscopy (400-1000 nm) combined with machine learning for this classification task. Spectral data were acquired from the sugarcane cultivar Khon Kaen 3 at multiple orientations, and various preprocessing techniques were employed to enhance spectral features. Three machine learning algorithms, linear discriminant analysis (LDA), K-Nearest Neighbors (KNNs), and artificial neural networks (ANNs), were evaluated for their classification performance. The results demonstrated high accuracy across all models, with ANN coupled with derivative preprocessing achieving an F1-score of 0.93 on both calibration and validation datasets, and 0.92 on an independent test set. This study underscores the feasibility of Vis-SWNIR spectroscopy and machine learning for rapid and precise node/internode classification, paving the way for automation in sugarcane billet preparation and other precision agriculture applications.

Farm to fork applications: how vibrational spectroscopy can be used along the whole value chain?

Vibrational spectroscopy is a nondestructive analysis technique that depends on the periodic variations in dipole moments and polarizabilities resulting from the molecular vibrations of molecules/atoms. These methods have important advantages over conventional analytical techniques, including (a) their simplicity in terms of implementation and operation, (b) their adaptability to on-line and on-farm applications, (c) making measurement in a few minutes, and (d) the absence of dangerous solvents throughout sample preparation or measurement. Food safety is a concept that requires the assurance that food is free from any physical, chemical, or biological hazards at all stages, from farm to fork. Continuous monitoring should be provided in order to guarantee the safety of the food. Regarding their advantages, vibrational spectroscopic methods, such as Fourier-transform infrared (FTIR), near-infrared (NIR), and Raman spectroscopy, are considered reliable and rapid techniques to track food safety- and food authenticity-related issues throughout the food chain. Furthermore, coupling spectral data with chemometric approaches also enables the discrimination of samples with different kinds of food safety-related hazards. This review deals with the recent application of vibrational spectroscopic techniques to monitor various hazards related to various foods, including crops, fruits, vegetables, milk, dairy products, meat, seafood, and poultry, throughout harvesting, transportation, processing, distribution, and storage.

Plasmonic Particle Integration into Near-Infrared Photodetectors and Photoactivated Gas Sensors: Toward Sustainable Next-Generation Ubiquitous Sensing

Current challenges in environmental science, medicine, food chemistry as well as the emerging use of artificial intelligence for solving problems in these fields require distributed, local sensing. Such ubiquitous sensing requires components with 1) high sensitivity, 2) power efficiency, 3) miniaturizability, and 4) the ability to directly interface with electronic circuitry, i.e., electronic readout of sensing signals. Over the recent years, several nanoparticle-based approaches have found their way into this field and have demonstrated high performance. However, challenges remain, such as the toxicity of many of today's narrow bandgap semiconductors for NIR detection and the high energy consumption as well as low selectivity of state-of-the-art commercialized gas sensors. With their unique light-matter interaction and ink-based fabrication schemes, plasmonic nanostructures provide potential technological solutions to these challenges, leading also to better environmental performance. In this perspective recent approaches of using plasmonic nanoparticles are discussed for the fabrication of NIR photodetectors and light-activated, energy-efficient gas sensing devices. In addition, new strategies implying computational approaches are pointed out for miniaturizable spectrometers, exploiting the wide spectral tunability of plasmonic nanocomposites, and for selective gas sensors, utilizing dynamic light activation. The benefits of colloidal approaches for device fabrication are discussed with regard to technological advantages and environmental aspects, which are barely considered so far.

A review of the emerging technologies and systems to mitigate food fraud in supply chains

Food fraud has serious consequences including reputational damage to businesses, health and safety risks and lack of consumer confidence. New technologies targeted at ensuring food authenticity has emerged and however, the penetration and diffusion of sophisticated analytical technologies are faced with challenges in the industry. This review is focused on investigating the emerging technologies and strategies for mitigating food fraud and exploring the key barriers to their application. The review discusses three key areas of focus for food fraud mitigation that include systematic approaches, analytical techniques and package-level anti-counterfeiting technologies. A notable gap exists in converting laboratory based sophisticated technologies and tools in high-paced, live industrial applications. New frontiers such as handheld laser-induced breakdown spectroscopy (LIBS) and smart-phone spectroscopy have emerged for rapid food authentication. Multifunctional devices with hyphenating sensing mechanisms together with deep learning strategies to compare food fingerprints can be a great leap forward in the industry. Combination of different technologies such as spectroscopy and separation techniques will also be superior where quantification of adulterants are preferred. With the advancement of automation these technologies will be able to be deployed as in-line scanning devices in industrial settings to detect food fraud across multiple points in food supply chains.

Portable NIR Spectroscopy to Simultaneously Trace Honey Botanical and Geographical Origins and Detect Syrup Adulteration

Fraudulent practices concerning honey are growing fast and involve misrepresentation of origin and adulteration. Simple and feasible methods for honey authentication are needed to ascertain honey compliance and quality. Working on a robust dataset and simultaneously investigating honey traceability and adulterant detection, this study proposed a portable FTNIR fingerprinting approach combined with chemometrics. Multifloral and unifloral honey samples (n = 244) from Spain and Sardinia (Italy) were discriminated by botanical and geographical origin. Qualitative and quantitative methods were developed using linear discriminant analysis (LDA) and partial least squares (PLS) regression to detect adulterated honey with two syrups, consisting of glucose, fructose, and maltose. Botanical and geographical origins were predicted with 90% and 95% accuracy, respectively. LDA models discriminated pure and adulterated honey samples with an accuracy of over 92%, whereas PLS allows for the accurate quantification of over 10% of adulterants in unifloral and 20% in multifloral honey.

Indirect prediction of the 3D printability of polysaccharide gels using multiple machine learning (ML) models

In this paper, the capabilities of NIR spectroscopy and LF-NMR data were compared for rapidly predicting the rheological properties of polysaccharide gels and assessing their printability. Seven machine learning (ML) models were established for rheological property prediction based on partial least squares regression (PLSR), support vector regression (SVR), back propagation artificial neural network (BPANN), one-dimensional convolutional neural network (1D CNN), recurrent neural network (RNN), long short-term memory (LSTM), and Transformer. The results showed that among the seven models, the SVR, BPANN, and 1D CNN models based on NIR spectroscopy effectively predicted the rheological parameters of polysaccharide gels, with the highest R2 in the prediction set reaching 0.9796 and the highest RPD reaching 7.0708. For most polysaccharide gels, using the LF-NMR relaxation time distribution curves provided better predictions of rheological properties than using transverse relaxation time and peak area. Among the seven models, the PLSR, SVR, 1D CNN, and Transformer models effectively predicted the rheological characteristics based on LF-NMR parameters, with the highest R2 in the prediction set reaching 0.9869 and the highest RPD reaching 8.7220. This study successfully established a prediction system for the rheological behaviors and 3D printing performance of polysaccharide gels using NIR spectroscopy and LF-NMR data combined with ML methods, achieving an intelligent assessment of the 3D printing behavior of polysaccharide gels.

PROSAC as a selection tool for SO-PLS regression: A strategy for multi-block data fusion

BACKGROUND

Spectral data from multiple sources can be integrated into multi-block fusion chemometric models, such as sequentially orthogonalized partial-least squares (SO-PLS), to improve the prediction of sample quality features. Pre-processing techniques are often applied to mitigate extraneous variability, unrelated to the response variables. However, the selection of suitable pre-processing methods and identification of informative data blocks becomes increasingly complex and time-consuming when dealing with a large number of blocks. The problem addressed in this work is the efficient pre-processing, selection, and ordering of data blocks for targeted applications in SO-PLS.

RESULTS

We introduce the PROSAC-SO-PLS methodology, which employs pre-processing ensembles with response-oriented sequential alternation calibration (PROSAC). This approach identifies the best pre-processed data blocks and their sequential order for specific SO-PLS applications. The method uses a stepwise forward selection strategy, facilitated by the rapid Gram-Schmidt process, to prioritize blocks based on their effectiveness in minimizing prediction error, as indicated by the lowest prediction residuals. To validate the efficacy of our approach, we showcase the outcomes of three empirical near-infrared (NIR) datasets. Comparative analyses were performed against partial-least-squares (PLS) regressions on single-block pre-processed datasets and a methodology relying solely on PROSAC. The PROSAC-SO-PLS approach consistently outperformed these methods, yielding significantly lower prediction errors. This has been evidenced by a reduction in the root-mean-squared error of prediction (RMSEP) ranging from 5 to 25 % across seven out of the eight response variables analyzed.

SIGNIFICANCE

The PROSAC-SO-PLS methodology offers a versatile and efficient technique for ensemble pre-processing in NIR data modeling. It enables the use of SO-PLS minimizing concerns about pre-processing sequence or block order and effectively manages a large number of data blocks. This innovation significantly streamlines the data pre-processing and model-building processes, enhancing the accuracy and efficiency of chemometric models.

Fast and Reliable On-Site Quality Assessment of Essential Raw Brewing Materials Using MicroNIR and Chemometrics

The interest in the quality control of the raw materials, intermediates, and final products, as well as production methods, of beer has increased significantly in recent decades due to the needs and expectations of consumers. Increasing in the industrialization and globalization of beer supply chains led to a need for novel analytical tools suitable for the rapid and reliable characterization of the materials involved. In this study, an ultracompact instrument operating in the NIR region of the spectrum, microNIR, was tested for the chemical investigation of barley malts. The essential raw materials for brewing require careful control since they deeply affect the characteristic flavor and taste of the final products. Therefore, a robust prediction model able to classify base and specialty barley malts was developed starting from NIR measurements. Soft Independent Class Analogy (SIMCA) was selected as the chemometric technique for the optimization of two prediction models, and ground and sieved materials were investigated using spectroscopy. The microNIR/chemometric approach proposed in this study permitted the correct prediction of the malt samples included in the external validation set, providing false positive and false negative rates no higher than 3.41% and 0.25%, respectively, and confirming the feasibility of the novel analytical platform.

Measurement errors and implications for preprocessing in miniaturised near-infrared spectrometers: Classification of sweet and bitter almonds as a case of study

Near-infrared (NIR) spectroscopy is a well-established analytical technique that has been used in many applications over the years. Due to the advancements in the semiconductor industry, NIR instruments have evolved from benchtop instruments to miniaturised portable devices. The miniaturised NIR instruments have gained more interest in recent years because of the fast and robust measurements they provide with almost no sample pretreatments. However, due to the very different configurations and characteristics of these instruments, they need a dedicated optimization of the measurement conditions, which is crucial for obtaining reliable results. To comprehensively grasp the capabilities and potentials offered by these sensors, it is imperative to examine errors that can affect the raw data, which is a facet frequently overlooked. In this study, measurement error covariance and correlation matrices were calculated and then visually inspected to gain insight into the error structures associated with the devices, and to find the optimal preprocessing technique that may result in the improvement of the models built. This strategy was applied to the classification of sweet and bitter almonds, which were measured with the three portable low-cost NIR devices (SCiO, FlameNIR+ and NeoSpectra Micro Development Kit) after removing the shelled, since their classification is of utmost importance for the almond industry. The results showed that bitter almonds can be classified from sweet almonds using any of the instruments after selecting the optimal preprocessing, obtained through inspection of covariance and correlation matrices. Measurements obtained with FlameNIR + device provided the best classification models with an accuracy of 98 %. The chosen strategy provides new insight into the performance characterization of the fast-growing miniaturised NIR instruments.

Miniaturized Near-Infrared spectrophotometers in forensic analytical science - a critical review

The advent of miniaturized NIR instruments, also known as compact, portable, or handheld, is revolutionizing how technology can be employed in forensics. In-field analysis becomes feasible and affordable with these new instruments, and a series of methods has been developed to provide the police and official agents with objective, easy-to-use, tailored, and accurate qualitative and quantitative forensic results. This work discusses the main aspects and presents a comprehensive and critical review of compact NIR spectrophotometers associated with analytical protocols to produce information on forensic matters.

The ability of a handheld near-infrared spectrometer to do a rapid quality assessment of bovine colostrum, including the immunoglobulin G concentration

Portable infrared-based instruments have made important contributions in different research fields. Within the dairy supply chain, for example, most of portable devices are based on near-infrared spectroscopy (NIRS) and are nowadays an important support for farmers and operators of the dairy sector, allowing fast and real-time decision-making, particularly for feed and milk quality evaluation and animal health and welfare monitoring. The affordability, portability, and ease of use of these instruments have been pivotal factors for their implementation on farm. In fact, pocket-sized devices enable nonexpert users to perform quick, low-cost, and nondestructive analysis on various matrixes without complex preparation. Because bovine colostrum (BC) quality is mostly given by the IgG level, evaluating the ability of portable NIRS tools to measure antibody concentration is advisable. In this study we used the wireless device SCiO manufactured by Consumer Physics Inc. (Tel Aviv, Israel) to collect BC spectra and then attempt to predict IgG concentration and gross and fine composition in individual samples collected immediately after calving (<6 h) in primiparous and pluriparous Holstein cows on 9 Italian farms. Chemometric analyses revealed that SCiO has promising predictive performance for colostral IgG concentration, total Ig concentration, fat, and AA. The coefficient of determination of cross-validation (R2CV) was in fact ≥0.75). Excellent accuracy was observed for dry matter, protein, and S prediction in cross-validation and good prediction ability in external validation (R2CV ≥ 0.93; the coefficient of determination of external validation, R2V, was ≥0.82). Nonetheless, SCiO's ability to discriminate between good- and low-quality samples (IgG ≥ vs. < 50 g/L) was satisfactory. The affordable cost, the accurate predictions, and the user-friendly design, coupled with the increased interest in BC within the dairy sector, may boost the collection of extensive BC data for management and genetic purposes in the near future.

Modernization of digital food safety control

Foodborne illness remains a pressing global issue due to the complexities of modern food supply chains and the vast array of potential contaminants that can arise at every stage of food processing from farm to fork. Traditional food safety control systems are increasingly challenged to identify these intricate hazards. The U.S. Food and Drug Administration's (FDA) New Era of Smarter Food Safety represents a revolutionary shift in food safety methodology by leveraging cutting-edge digital technologies. Digital food safety control systems employ modern solutions to monitor food quality by efficiently detecting in real time a wide range of contaminants across diverse food matrices within a short timeframe. These systems also utilize digital tools for data analysis, providing highly predictive assessments of food safety risks. In addition, digital food safety systems can deliver a secure and reliable food supply chain with comprehensive traceability, safeguarding public health through innovative technological approaches. By utilizing new digital food safety methods, food safety authorities and businesses can establish an efficient regulatory framework that genuinely ensures food safety. These cutting-edge approaches, when applied throughout the food chain, enable the delivery of safe, contaminant-free food products to consumers.

What the fish? Tracing the geographical origin of fish using NIR spectroscopy

Food authentication is a growing concern with rising complexities of the food supply network, with fish being an easy target of food fraud. In this regard, NIR spectroscopy has been used as an efficient tool for food authentication. This article reviews the latest research advances on NIR based fish authentication. The process from sampling/sample preparation to data analysis has been covered. Special attention was given to NIR spectra pre-processing and its unsupervised and supervised analysis. Sampling is an important aspect of traceability study and samples chosen ought to be a true representative of the population. NIR spectra acquired is often laden with overlapping bands, scattering and highly multicollinear. It needs adequate pre-processing to remove all undesirable features. The pre-processing technique can make or break a model and thus need a trial-and-error approach to find the best fit. As for spectral analysis and modelling, multicollinear nature of NIR spectra demands unsupervised analysis (PCA) to compact the features before application of supervised multivariate techniques such as LDA, PLS-DA, QDA etc. Machine learning approach of modelling has shown promising result in food authentication modelling and negates the need for unsupervised analysis before modelling.

Quantum dot-enabled infrared hyperspectral imaging with single-pixel detection

Near-infrared (NIR) hyperspectral imaging is a powerful technique that enables the capture of three-dimensional (3D) spectra-spatial information within the NIR spectral range, offering a wide array of applications. However, the high cost associated with InGaAs focal plane array (FPA) has impeded the widespread adoption of NIR hyperspectral imaging. Addressing this challenge, in this study, we adopt an alternative approach-single-pixel detection for NIR hyperspectral imaging. Our investigation reveals that single-pixel detection outperforms conventional FPA, delivering a superior signal-to-noise ratio (SNR) for both spectral and imaging reconstruction. To implement this strategy, we leverage self-assembled colloidal quantum dots (CQDs) and a digital micromirror device (DMD) for NIR spectral and spatial information multiplexing, complemented by single-pixel detection for simultaneous spectral and image reconstruction. Our experimental results demonstrate successful NIR hyperspectral imaging with a detection window about 600 nm and an average spectral resolution of 8.6 nm with a pixel resolution of 128 × 128. The resulting spectral and spatial data align well with reference instruments, which validates the effectiveness of our approach. By circumventing the need for expensive and bulky FPA and wavelength selection components, our solution shows promise in advancing affordable and accessible NIR hyperspectral imaging technologies, thereby expanding the range of potential applications.

Exploring the use of NIR and Raman spectroscopy for the prediction of quality traits in PDO cheeses

The aims of this proof of principle study were to compare two different chemometric approaches using a Bayesian method, Partial Least Square (PLS) and PLS-discriminant analysis (DA), for the prediction of the chemical composition and texture properties of the Grana Padano (GP) and Parmigiano Reggiano (PR) PDO cheeses by using NIR and Raman spectra and quantify their ability to distinguish between the two PDO and among their ripening periods. For each dairy chain consortium, 9 cheese samples from 3 dairy industries were collected for a total of 18 cheese samples. Three seasoning times were chosen for each dairy industry: 12, 20, and 36 months for GP and 12, 24, and 36 months for PR. A portable NIR instrument (spectral range: 950-1,650 nm) was used on 3 selected spots on the paste of each cheese sample, for a total of 54 spectra collected. An Alpha300 R confocal Raman microscope was used to collect 10 individual spectra for each cheese sample in each spot for a total of 540 Raman spectra collected. After the detection of eventual outliers, the spectra were also concatenated together (NIR + Raman). All the cheese samples were assessed in terms of chemical composition and texture properties following the official reference methods. A Bayesian approach and PLS-DA were applied to the NIR, Raman, and fused spectra to predict the PDO type and seasoning time. The PLS-DA reached the best performances, with 100% correctly identified PDO type using Raman only. The fusion of the data improved the results in 60% of the cases with the Bayesian and of 40% with the PLS-DA approach. A Bayesian approach and a PLS procedure were applied to the NIR, Raman, and fused spectra to predict the chemical composition of the cheese samples and their texture properties. In this case, the best performance in validation was reached with the Bayesian method on Raman spectra for fat (R2VAL = 0.74). The fusion of the data was not always helpful in improving the prediction accuracy. Given the limitations associated with our sample set, future studies will expand the sample size and incorporate diverse PDO cheeses.

Combined Application of Fluorescence Spectroscopy and Principal Component Analysis in Characterisation of Selected Herbhoneys

This study reports the use of front-face fluorescence spectroscopy with principal component analysis (PCA) as a tool for the characterisation of selected Polish herbhoneys (raspberry, lemon balm, rose, mint, black current, instant coffee, pine, hawthorn, and nettle). Fluorimetric spectra registered in the ranges ascribed to fluorescence of amino acids, polyphenols, vitamins, and products of Maillard's reaction enabled the comparison of herbhoney compositions. Obtained synchronous spectra combined with PCA were used to investigate potential differences between analysed samples and interactions between compounds present in them. The most substantial influence on the total variance had the intensities of polyphenols fluorescence. These intensities were the main factor differentiated by the analysed products.

Unveiling the synergy of NIRS and enrichment technologies: A comprehensive review of in-sorbent-based detection and quantification strategies

This comprehensive review paper aims to captivate the applicability of in-sorbent detection, where near-infrared spectroscopy (NIRS) converges with enrichment technologies. For this purpose, we collected and summarized information regarding the combination of several sophisticated analytical enrichment techniques with NIRS to further explore and develop this synergistic approach. Peer-reviewed publications, matching the criteria of in situ NIR measurements prior analyte elution, have been collected, investigated, and concluded within this review. Investigations according to used materials, commercial or self-made, composition, organic or inorganic and applied analytical methodologies have been carried out. Applications extending over a multitude of chemical fields, from environmental to medicinal applications. As this review concludes, the combination of these techniques further expands the applicability of NIRS and moreover tries to solve the long-standing issue of the comparably low sensitivity regarding this vibrational technique.

Designing a novel method based on multiplex PCR for detecting various meat of birds in processed ground meat products

Falsified food directly influences wildlife, fair trade, religion, and the health of society. Here, we report a multiplex polymerase chain reaction to evaluate the accurate determination of seven species of bird meat in meals on a single assay platform. To amplify segments of DNA from Columba livia, Corvus moneduloides, Gallus gallus, Coturnix japonica, Phasianus colchicus, Struthio camelus, and Meleagris gallopavo meats, respectively, a total of seven sets of species-specific primers targeting the mitochondrial and cytochrome b genes were developed. Gel photographs and electrochromatography from an Experion Bioanalyzer were used to identify all PCR products. Species specificity checks discovered no cross-species amplification. The applicability of its screening to find target species in processed food was shown in commercial and model meatballs. A validation study revealed that the test is reliable, quick, affordable, repeatable, specific, and accurate down to 50,000 mitochondrial copies. It might be used for raw meats and products involving processed and severely deteriorated food samples. The customers, the food business, and law enforcement would all benefit immensely from this suggested approach.

Rapid evaluation of Ziziphi Spinosae Semen and its adulterants based on the combination of FT-NIR and multivariate algorithms

Ziziphi Spinosae Semen (ZSS) is a valued seed renowned for its sedative and sleep-enhancing properties. However, the price increase has been accompanied by adulteration. In this study, chromaticity analysis and Fourier transform near-infrared (FT-NIR) combined with multivariate algorithms were employed to identify the adulteration and quantitatively predict the adulteration ratio. The findings suggested that the utilization of chromaticity extractor was insufficient for identification of adulteration ratio. The raw spectrum of ZMS and HAS adulterants extracted by FT-NIR was processed by SNV + CARS and 1d + SG + ICO respectively, the average accuracy of machine learning classification model was improved from 77.06 % to 97.58 %. Furthermore, the R2 values of the calibration and prediction set of the two quantitative prediction regression models of adulteration ratio are greater than 0.99, demonstrating excellent linearity and predictive accuracy. Overall, this study demonstrated that FT-NIR combined with multivariate algorithms provided a significant approach to addressing the growing issue of ZSS adulteration.

Near infrared sensors for the precise characterization of salt content in canned tuna fish

Non-invasive technologies could help to guarantee quality standards of canned tuna fish. The aim of this study was to investigate the ability of bench-top (FT-NIR) and low-cost (LC-NIR) near infrared spectrometers to determine salt content and texture in canned tuna. Salt content distribution was also investigated using hyperspectral imaging (HSI) and computed tomography. Spectra were acquired on canned tuna and reference analysis performed. Partial least squares regression and discriminant analysis were used to develop salt content predictive and texture classification models. Salt content predictive errors were 0.10%, 0.22% and 0.22% for FT-NIR, LC-NIR and HSI, respectively. Salt content was not always homogeneously distributed in the can which was attributed to the salt content differences between internal and external parts of the tuna fish. Low-cost sensors could be a suitable solution to standardise the production and enable precise nutritional labelling, but more sophisticated algorithms are needed to identify textural defects.

The Application of Handheld Near-Infrared Spectroscopy and Raman Spectroscopic Imaging for the Identification and Quality Control of Food Products

The following investigations describe the potential of handheld NIR spectroscopy and Raman imaging measurements for the identification and authentication of food products. On the one hand, during the last decade, handheld NIR spectroscopy has made the greatest progress among vibrational spectroscopic methods in terms of miniaturization and price/performance ratio, and on the other hand, the Raman spectroscopic imaging method can achieve the best lateral resolution when examining the heterogeneous composition of samples. The utilization of both methods is further enhanced via the combination with chemometric evaluation methods with respect to the detection, identification, and discrimination of illegal counterfeiting of food products. To demonstrate the solution to practical problems with these two spectroscopic techniques, the results of our recent investigations obtained for various industrial processes and customer-relevant product examples have been discussed in this article. Specifically, the monitoring of food extraction processes (e.g., ethanol extraction of clove and water extraction of wolfberry) and the identification of food quality (e.g., differentiation of cocoa nibs and cocoa beans) via handheld NIR spectroscopy, and the detection and quantification of adulterations in powdered dairy products via Raman imaging were outlined in some detail. Although the present work only demonstrates exemplary product and process examples, the applications provide a balanced overview of materials with different physical properties and manufacturing processes in order to be able to derive modified applications for other products or production processes.

Process understanding and monitoring: A glimpse into data strategies for miniaturized NIR spectrometers

BACKGROUND

The implementation of process analytical technologies (PAT) has gained attention since 2004 when its formal introduction through the U.S. Food and Drug Administration was introduced. Manufacturers that need to evaluate the employment of new monitoring systems could face different challenges: identification of suitable sensors, verification of data meaning, evaluation of several statistical strategies to obtain insights about data and achieve process understanding and finally, the actual possibilities for monitoring. Kefir fermentations were chosen as an example because of the chemical and physical transformations that occurred during the process, which could be common to several other fermentation processes. In order to pave the way for monitoring establish the information contained in the data and find the right tools for extracting them is of extreme importance. Strategies to identify different experimental conditions in the spectra acquired with a miniaturized NIR (1350-2550 nm) during process occurrence were addressed.

RESULTS

The study aims to offer insights into good practices and steps to pave the way for process monitoring with handheld NIR data. The main aspects of interest for batch processes in preliminary evaluations were investigated and discussed. On the one hand, process understanding and, on the other, the possibilities for process monitoring and endpoint determination were examined. The combination of different statistical tools allowed the extraction of information from the data and the identification of the link between them and the chemical and physical changes during the process. In addition, insights into the spectra characteristics in the studied spectroscopic range for kefir fermentation were reported.

SIGNIFICANCE

The capabilities for miniaturized NIR spectra to represent and statistical strategies to characterize different experimental conditions in a real case fermentation occurrence were proved. The strengths and limitations of some of the common approaches to catch changes in fermentation condition were highlighted. For the various statistical approaches, the chances offered in the research and development stages and to set the scene for monitoring and end-point detection were explored.

In-Field Implementation of Near-Infrared Quantitative Methods for Analysis of Medicines in Tropical Environments

Near-infrared (NIR) spectroscopy is actually a well-established technique that demonstrates its performance in the frame of detection of poor-quality medicines. The use of low-cost handheld NIR spectrophotometers in low-resource contexts can allow an inexpensive and more rapid detection compared to laboratory methods. Considering these points, it was decided to develop, validate, and transfer methods for the quantification of ciprofloxacin and metronidazole tablet samples using a NIR handheld spectrophotometer in transmission mode (NIR-M-T1) coupled to chemometrics such as partial least squares regression (PLSR) algorithm. All of the models were validated with the total error approach using an accuracy profile as a decision tool, with ±10% specifications and a risk α set at 5%. Quantitative PLSR models were first validated in Belgium, which is a temperate oceanic climate zone. Second, they were transferred to Cameroon, a tropical climate zone, where issues regarding the prediction of new validation series with the initial models were highlighted. Two augmentation strategies were then envisaged to make the predictive models robust to environmental conditions, incorporating the potential variability linked to environmental effects in the initial calibration sets. The resulting models were then used for in-field analysis of ciprofloxacin and metronidazole tablet samples collected in three cities in Cameroon. The contents results obtained for each sample with the two strategies were close and not statistically different. Nevertheless, the first one is easier to implement and the second is the best regarding model diagnostic measures and accuracy profiles. Two samples were found to be noncompliant in terms of content, and these results were confirmed using high-performance liquid chromatography taken as the reference method.

Authentication and discrimination of new Brazilian Canephora coffees with geographical indication using a miniaturized near-infrared spectrometer

New Brazilian Canephora coffees (Conilon and Robusta) of high added value from specific origins have been protected by geographical indication to guarantee their origin and quality. Recently, benchtop near-infrared (NIR) spectroscopy combined with chemometrics has demonstrated its usefulness to discriminate them. It was the first study, however, and therefore the possibility exists to develop a new portable NIR method for this purpose. This work assessed a miniaturized NIR as a cheaper spectrometer to discriminate and authenticate new Brazilian Canephora coffees with certified geographical origins and to differentiate them from specialty Arabica. Discriminant chemometric and class modeling techniques have been applied and have obtained good predictive ability on external test sets. In addition, models with similar classification purpose were compared with those obtained in previous research carried out with benchtop NIR for the same samples, obtaining comparable results. In this context, the portable method was used as a laboratory technique and has the advantage of being cheaper than benchtop NIR spectrometer. Furthermore, it brings a high possibility to be implemented in small coffee cooperatives, industries or control agencies in the future that do not have high economic resources.

Portable NIR spectroscopy: the route to green analytical chemistry

There is a growing interest for cost-effective and nondestructive analytical techniques in both research and application fields. The growing approach by near-infrared spectroscopy (NIRs) pushes to develop handheld devices devoted to be easily applied for in situ determinations. Consequently, portable NIR spectrometers actually result definitively recognized as powerful instruments, able to perform nondestructive, online, or in situ analyses, and useful tools characterized by increasingly smaller size, lower cost, higher robustness, easy-to-use by operator, portable and with ergonomic profile. Chemometrics play a fundamental role to obtain useful and meaningful results from NIR spectra. In this review, portable NIRs applications, published in the period 2019-2022, have been selected to indicate starting references. These publications have been chosen among the many examples of the most recent applications to demonstrate the potential of this analytical approach which, not having the need for extraction processes or any other pre-treatment of the sample under examination, can be considered the "true green analytical chemistry" which allows the analysis where the sample to be characterized is located. In the case of industrial processes or plant or animal samples, it is even possible to follow the variation or evolution of fundamental parameters over time. Publications of specific applications in this field continuously appear in the literature, often in unfamiliar journal or in dedicated special issues. This review aims to give starting references, sometimes not easy to be found.

Non-Targeted Detection and Quantification of Food Adulteration of High-Quality Stingless Bee Honey (SBH) via a Portable LED-Based Fluorescence Spectroscopy

Stingless bee honey (SBH) is rich in phenolic compounds and available in limited quantities. Authentication of SBH is important to protect SBH from adulteration and retain the reputation and sustainability of SBH production. In this research, we use portable LED-based fluorescence spectroscopy to generate and measure the fluorescence intensity of pure SBH and adulterated samples. The spectrometer is equipped with four UV-LED lamps (peaking at 365 nm) as an excitation source. Heterotrigona itama, a popular SBH, was used as a sample. 100 samples of pure SBH and 240 samples of adulterated SBH (levels of adulteration ranging from 10 to 60%) were prepared. Fluorescence spectral acquisition was measured for both the pure and adulterated SBH samples. Principal component analysis (PCA) demonstrated that a clear separation between the pure and adulterated SBH samples could be established from the first two principal components (PCs). A supervised classification based on soft independent modeling of class analogy (SIMCA) achieved an excellent classification result with 100% accuracy, sensitivity, specificity, and precision. Principal component regression (PCR) was superior to partial least squares regression (PLSR) and multiple linear regression (MLR) methods, with a coefficient of determination in prediction (R2p) = 0.9627, root mean squared error of prediction (RMSEP) = 4.1579%, ratio prediction to deviation (RPD) = 5.36, and range error ratio (RER) = 14.81. The LOD and LOQ obtained were higher compared to several previous studies. However, most predicted samples were very close to the regression line, which indicates that the developed PLSR, PCR, and MLR models could be used to detect HFCS adulteration of pure SBH samples. These results showed the proposed portable LED-based fluorescence spectroscopy has a high potential to detect and quantify food adulteration in SBH, with the additional advantages of being an accurate, affordable, and fast measurement with minimum sample preparation.

Recent Progress on Fluorescent Probes in Heavy Metal Determinations for Food Safety: A Review

One of the main challenges faced in food safety is the accumulation of toxic heavy metals from environmental sources, which can sequentially endanger human health when they are consumed. It is invaluable to establish a practical assay for the determination of heavy metals for food safety. Among the current detection methods, technology based on fluorescent probes, with the advantages of sensitivity, convenience, accuracy, cost, and reliability, has recently shown pluralistic applications in the food industry, which is significant to ensure food safety. Hence, this review systematically presents the recent progress on novel fluorescent probes in determining heavy metals for food safety over the past five years, according to fluorophores and newly emerging sensing cores, which could contribute to broadening the prospects of fluorescent materials and establishing more practical assays for heavy metal determinations.

Current Application of Advancing Spectroscopy Techniques in Food Analysis: Data Handling with Chemometric Approaches

In today's era of increased food consumption, consumers have become more demanding in terms of safety and the quality of products they consume. As a result, food authorities are closely monitoring the food industry to ensure that products meet the required standards of quality. The analysis of food properties encompasses various aspects, including chemical and physical descriptions, sensory assessments, authenticity, traceability, processing, crop production, storage conditions, and microbial and contaminant levels. Traditionally, the analysis of food properties has relied on conventional analytical techniques. However, these methods often involve destructive processes, which are laborious, time-consuming, expensive, and environmentally harmful. In contrast, advanced spectroscopic techniques offer a promising alternative. Spectroscopic methods such as hyperspectral and multispectral imaging, NMR, Raman, IR, UV, visible, fluorescence, and X-ray-based methods provide rapid, non-destructive, cost-effective, and environmentally friendly means of food analysis. Nevertheless, interpreting spectroscopy data, whether in the form of signals (fingerprints) or images, can be complex without the assistance of statistical and innovative chemometric approaches. These approaches involve various steps such as pre-processing, exploratory analysis, variable selection, regression, classification, and data integration. They are essential for extracting relevant information and effectively handling the complexity of spectroscopic data. This review aims to address, discuss, and examine recent studies on advanced spectroscopic techniques and chemometric tools in the context of food product applications and analysis trends. Furthermore, it focuses on the practical aspects of spectral data handling, model construction, data interpretation, and the general utilization of statistical and chemometric methods for both qualitative and quantitative analysis. By exploring the advancements in spectroscopic techniques and their integration with chemometric tools, this review provides valuable insights into the potential applications and future directions of these analytical approaches in the food industry. It emphasizes the importance of efficient data handling, model development, and practical implementation of statistical and chemometric methods in the field of food analysis.

Discrimination of lamb (Ovis aries), emu (Dromaius novaehollandiae), camel (Camelus dromedarius) and beef (Bos taurus) binary mixtures using a portable near infrared instrument combined with chemometrics

Consumers demand safe and nutritious foods at accessible prices; where issues associated with adulteration, fraud, and provenance have become important aspects to be considered by the modern food industry. There are many analytical techniques and methods available to determine food composition and quality, including food security. Among them, vibrational spectroscopy techniques are at the first line of defence (near and mid infrared spectroscopy, and Raman spectroscopy). In this study, a portable near infrared (NIR) instrument was evaluated to identify different levels of adulteration between binary mixtures of exotic and traditional meat species. Fresh meat cuts of lamb (Ovis aries), emu (Dromaius novaehollandiae), camel (Camelus dromedarius) and beef (Bos taurus) sourced from a commercial abattoir were used to make different binary mixtures (95 % %w/w, 90 % %w/w, 50 % %w/w, 10 % %w/w and 5 % %w/w) and analysed using a portable NIR instrument. The NIR spectra of the meat mixtures was analysed using principal component analysis (PCA), and partial least squares discriminant analysis (PLS-DA). Two isosbestic points corresponding to absorbances at 1028 nm and 1224 nm were found to be consistent across all the binary mixtures analysed. The coefficient of determination in cross validation (R²) obtained for the determination of the per cent of species in a binary mixture was above 90 % with a standard error in cross validation (SECV) ranging between 12.6 and 15 %w/w. Overall, the results of this study indicate that NIR spectroscopy can determine the level or ratio of adulteration in the binary mixtures of minced meat.

Analyzing the Quality Parameters of Apples by Spectroscopy from Vis/NIR to NIR Region: A Comprehensive Review

Spectroscopic methods deliver a valuable non-destructive analytical tool that provides simultaneous qualitative and quantitative characterization of various samples. Apples belong to the world's most consumed crops and with the current challenges of climate change and human impacts on the environment, maintaining high-quality apple production has become critical. This review comprehensively analyzes the application of spectroscopy in near-infrared (NIR) and visible (Vis) regions, which not only show particular potential in evaluating the quality parameters of apples but also in optimizing their production and supply routines. This includes the assessment of the external and internal characteristics such as color, size, shape, surface defects, soluble solids content (SSC), total titratable acidity (TA), firmness, starch pattern index (SPI), total dry matter concentration (DM), and nutritional value. The review also summarizes various techniques and approaches used in Vis/NIR studies of apples, such as authenticity, origin, identification, adulteration, and quality control. Optical sensors and associated methods offer a wide suite of solutions readily addressing the main needs of the industry in practical routines as well, e.g., efficient sorting and grading of apples based on sweetness and other quality parameters, facilitating quality control throughout the production and supply chain. This review also evaluates ongoing development trends in the application of handheld and portable instruments operating in the Vis/NIR and NIR spectral regions for apple quality control. The use of these technologies can enhance apple crop quality, maintain competitiveness, and meet the demands of consumers, making them a crucial topic in the apple industry. The focal point of this review is placed on the literature published in the last five years, with the exceptions of seminal works that have played a critical role in shaping the field or representative studies that highlight the progress made in specific areas.

Handheld and benchtop vis/NIR spectrometer combined with PLS regression for fast prediction of cocoa shell in cocoa powder

The fermented and dried cocoa beans are peeled, either before or after the roasting process, as peeled nibs are used for chocolate production, and shell content in cocoa powders may result from economically motivated adulteration (EMA), cross-contamination or misfits in equipment in the peeling process. The performance of this process is carefully evaluated, as values above 5% (w/w) of cocoa shell can directly affect the sensory quality of cocoa products. In this study chemometric methods were applied to near-infrared (NIR) spectra from a handheld (900-1700 nm) and a benchtop (400-1700 nm) spectrometers to predict cocoa shell content in cocoa powders. A total of 132 binary mixtures of cocoa powders with cocoa shell were prepared at several proportions (0 to 10% w/w). Partial least squares regression (PLSR) was used to develop the calibration models and different spectral preprocessing were investigated to improve the predictive performance of the models. The ensemble Monte Carlo variable selection (EMCVS) method was used to select the most informative spectral variables. Based on the results obtained with both benchtop (R²_P = 0.939, RMSE_P = 0.687% and RPD_P = 4.14) and handheld (R²_P = 0.876, RMSE_P = 1.04% and RPD_P = 2.82) spectrometers, NIR spectroscopy combined with the EMCVS method proved to be a highly accurate and reliable tool for predicting cocoa shell in cocoa powder. Even with a lower predictive performance than the benchtop spectrometer, the handheld spectrometer has potential to specify whether the amount of cocoa shell present in cocoa powders is in accordance with the Codex Alimentarius specifications.

Performance of a Handheld Near-Infrared Spectroscopy Device to Predict Pork Primal Belly Fat Iodine Value and Loin Lean Intramuscular Fat Content

The increase in market demand and economic value of Canadian pork primal cuts has led to a need to assess advanced technologies capable of measuring quality traits. Fat and lean composition were measured using a Tellspec near-infrared (NIR) spectroscopy device to predict the pork belly fat iodine value (IV) and loin lean intramuscular fat (IMF) content in 158 pork belly primals and 419 loin chops. The calibration model revealed a 90.6% and 88.9% accuracy for the Tellspec NIR to predict saturated fatty acids (SFA) and IV, respectively, in the belly fat. The calibration model accuracy for the other belly fatty acids revealed an accuracy of 66.3-86.1%. Using the Tellspec NIR to predict loin lean IMF reported a lower accuracy for moisture (R² = 60) and fat % (R² = 40.4). This suggests that Tellspec NIR spectroscopy measures on the pork belly primal offers a cost-efficient, rapid, accurate, and non-invasive indicator of pork belly IV and could be used for the classification for specific markets.

Quality Monitoring of Biodiesel and Diesel/Biodiesel Blends: A Comparison between Benchtop FT-NIR versus a Portable Miniaturized NIR Spectroscopic Analysis

A methodology such as near-infrared (NIR) spectroscopy, which enables in situ and in real-time analysis, is crucial to perform quality control of biodiesel, since it is blended into diesel fuel and the presence of contaminants can hinder its performance. This work aimed to compare the performance of a benchtop Fourier Transform (FT) NIR spectrometer with a prototype of a portable, miniaturized near-infrared spectrometer (miniNIR) to detect and quantify contaminants in biodiesel and biodiesel in diesel. In general, good models based on principal component analysis-linear discriminant analysis (PCA-LDA) of FT-NIR spectra were obtained, predicting with high accuracies biodiesel contaminants and biodiesel in diesel (between 75% to 95%), as well as good partial least square (PLS) regression models to predict contaminants concentration in biodiesel and biodiesel concentration in diesel/biodiesel blends, with high coefficients of determination (between 0.83 and 0.99) and low prediction errors. The miniNIR prototype’s PCA-LDA models enabled the prediction of target contaminants with good accuracies (between 66% and 86%), and a PLS model enabled the prediction of biodiesel concentration in diesel with a reasonable coefficient of determination (0.68), pointing to the device’s potential for preliminary analysis of biodiesel which, associated with its potential low cost and portability, could increase biodiesel quality control.

Enhancing Pigment Phenotyping and Classification in Lettuce through the Integration of Reflectance Spectroscopy and AI Algorithms

In this study, we investigated the use of artificial intelligence algorithms (AIAs) in combination with VIS-NIR-SWIR hyperspectroscopy for the classification of eleven lettuce plant varieties. For this purpose, a spectroradiometer was utilized to collect hyperspectral data in the VIS-NIR-SWIR range, and 17 AIAs were applied to classify lettuce plants. The results showed that the highest accuracy and precision were achieved using the full hyperspectral curves or the specific spectral ranges of 400-700 nm, 700-1300 nm, and 1300-2400 nm. Four models, AdB, CN2, G-Boo, and NN, demonstrated exceptional R² and ROC values, exceeding 0.99, when compared between all models and confirming the hypothesis and highlighting the potential of AIAs and hyperspectral fingerprints for efficient, precise classification and pigment phenotyping in agriculture. The findings of this study have important implications for the development of efficient methods for phenotyping and classification in agriculture and the potential of AIAs in combination with hyperspectral technology. To advance our understanding of the capabilities of hyperspectroscopy and AIs in precision agriculture and contribute to the development of more effective and sustainable agriculture practices, further research is needed to explore the full potential of these technologies in different crop species and environments.

Near-infrared spectroscopy for early selection of waxy cassava clones via seed analysis

Cassava (Manihot esculenta Crantz) starch consists of amylopectin and amylose, with its properties determined by the proportion of these two polymers. Waxy starches contain at least 95% amylopectin. In the food industry, waxy starches are advantageous, with pastes that are more stable towards retrogradation, while high-amylose starches are used as resistant starches. This study aimed to associate near-infrared spectrophotometry (NIRS) spectra with the waxy phenotype in cassava seeds and develop an accurate classification model for indirect selection of plants. A total of 1127 F2 seeds were obtained from controlled crosses performed between 77 F1 genotypes (wild-type, Wx_). Seeds were individually identified, and spectral data were obtained via NIRS using a benchtop NIRFlex N-500 and a portable SCiO device spectrometer. Four classification models were assessed for waxy cassava genotype identification: k-nearest neighbor algorithm (KNN), C5.0 decision tree (CDT), parallel random forest (parRF), and eXtreme Gradient Boosting (XGB). Spectral data were divided between a training set (80%) and a testing set (20%). The accuracy, based on NIRFlex N-500 spectral data, ranged from 0.86 (parRF) to 0.92 (XGB). The Kappa index displayed a similar trend as the accuracy, considering the lowest value for the parRF method (0.39) and the highest value for XGB (0.71). For the SCiO device, the accuracy (0.88-0.89) was similar among the four models evaluated. However, the Kappa index was lower than that of the NIRFlex N-500, and this index ranged from 0 (parRF) to 0.16 (KNN and CDT). Therefore, despite the high accuracy these last models are incapable of correctly classifying waxy and non-waxy clones based on the SCiO device spectra. A confusion matrix was performed to demonstrate the classification model results in the testing set. For both NIRS, the models were efficient in classifying non-waxy clones, with values ranging from 96-100%. However, the NIRS differed in the potential to predict waxy genotype class. For the NIRFlex N-500, the percentage ranged from 30% (parRF) to 70% (XGB). In general, the models tended to classify waxy genotypes as non-waxy, mainly SCiO. Therefore, the use of NIRS can perform early selection of cassava seeds with a waxy phenotype.

On the Importance of Investigating Data Structure in Miniaturized NIR Spectroscopy Measurements of Food: The Case Study of Sugar

Alongside the increasing proofs of efficacy of miniaturized NIR instruments in food-related scenarios, it is progressively growing the number of end-users, even incentivized by the low-cost of the sensors. While attention is paid to the analytical protocol-from sampling to data collection, up to the data processing, the importance of error investigation in raw data is generally underestimated. Understanding the sources and the structure of uncertainty related to the raw data improves the quality of measurements and suggests the correct planning of the experiments, as well as helps in chemometric model development. The goal of chemometric modeling is to separate information from noise; therefore, a description of the nature of measurement error structure is necessary. Among the different approaches, we present the study of the Error Covariance Matrices (ECMs) and their decomposition in a bilinear structure as a powerful method to study the main sources of variability when using miniaturized NIR sensors in the actual way of use. Granulated and lump sugar samples were chosen as the case study and analyzed with two miniaturized spectrometers working in the NIR regions around 1350-2550 nm and 900-1750 nm, respectively, in dispersive reflectance mode. Results show that having some insights on multivariate measurement errors associated with spectra could be interesting in paving the way for several applications.

NMR-Based Chromatography Readouts: Indispensable Tools to “Translate” Analytical Features into Molecular Structures

Gaining structural information is a must to allow the unequivocal structural characterization of analytes from natural sources. In liquid state, NMR spectroscopy is almost the only possible alternative to HPLC-MS and hyphenating the effluent of an analyte separation device to the probe head of an NMR spectrometer has therefore been pursued for more than three decades. The purpose of this review article was to demonstrate that, while it is possible to use mass spectrometry and similar methods to differentiate, group, and often assign the differentiating variables to entities that can be recognized as single molecules, the structural characterization of these putative biomarkers usually requires the use of NMR spectroscopy.

Exploring the Analytical Complexities in Insect Powder Analysis Using Miniaturized NIR Spectroscopy

Insects have been a food source for humans for millennia, and they are actively consumed in various parts of the world. This paper aims to ascertain the feasibility of portable near-infrared (NIR) spectroscopy as a reliable and fast candidate for the classification of insect powder samples and the prediction of their major components. Commercially-available insect powder samples were analyzed using two miniaturized NIR instruments. The samples were analyzed as they are and after grinding, to study the effect of the granulometry on the spectroscopic analyses. A homemade sample holder was designed and optimized for making reliable spectroscopic measurements. Classification was then performed using three classification strategies, and partial least squares (PLS) regression was used to predict the macronutrients. The results obtained confirmed that both spectroscopic sensors were able to classify insect powder samples and predict macronutrients with an adequate detection limit.

Discrimination between Wild and Farmed Sea Bass by Using New Spectrometry and Spectroscopy Methods

European sea bass (Dicentrarchus labrax L.) is one of the most economically important fish species in the Mediterranean Sea area. Despite strict requirements regarding indications of production method (wild/farmed), incorrect labelling of sea bass is a practice still frequently detected. The aim of this study was to evaluate the capabilities of two techniques, Near-InfraRed (NIR) spectroscopy and mass spectrometry, to discriminate sea bass according to the production method. Two categories were discriminated based on the docosahexaenoic and arachidonic fatty acid ratio by using a Direct Sample Analysis (DSA) system integrated with a time-of-flight (TOF) mass spectrometer. The cut-off value of 3.42, of fatty acid ratio, was able to discriminate between the two types of fish with sensitivity and specificity of 100%. It was possible to classify fish production by using multivariate analysis with portable NIR. The results achieved by the developed validation models suggest that this approach is able to distinguish the two product categories with high sensitivity (100%) and specificity (90%). The results obtained from this study highlight the potential application of two easy, fast, and accurate screening methods to detect fraud in commercial sea bass production.