Consumer Perception of Beef Quality and How to Control, Improve and Predict It? Focus on Eating Quality

Vachellia erioloba leaf meal inclusion in ammoniated maize stover-based finisher diets improves growth, meat quality and fatty acid profiles of lambs

The effects of Vachellia erioloba leaf meal incorporation in maize stover based diets on growth, meat quality and fatty acid profiles of lambs was assessed. Thirty-two female lambs weighing approximately 21.86 ± 1 kg were allotted to four dietary treatments formulated with the inclusion of maize stove and V. erioloba in place of the lucerne in diets: Control (Lamb finishing ration, LFR), LFR + 20 % untreated maize stover (UMS), LFR + 20 % ammoniated maize stover (AMS) and LFR + 10 % ammoniated maize stover and 10 % Vachellia leaf meal (AMSVL). Lambs fed the Control and AMSVL diets had the highest (P < 0.05) average daily feed intake (ADFI), while those fed the AMS and AMSVL diets obtained lower FCR values. Loin weights were higher in lambs fed the AMSVL diet. Lambs fed the UMS diet had the highest (P = 0.05) value for meat redness (a*). Water holding capacity (WHC) was highest (P < 0.05) in lambs fed the AMSVL, while shear force values were highest in lambs fed the UMS diet. The UMS diet obtained the highest amounts of SFAs. Nevertheless, the lambs in the AMSVL treatment obtained the highest (P < 0.05) proportions of total UFAs. Diet had no effect on PUFAs, PUFA/SFA and omega6/omega 3 ratios. Supplementing treated maize stover with Vachellia erioboba leaf meal may optimize growth, meat quality and fatty acid profiles of meat in lambs.

Effect of Linseed Feeding on Carcass and Meat Quality and Intramuscular Fatty Acid Profile of Simmental Bulls Slaughtered at Different Ages

The inclusion of linseed in cattle diets can improve the fatty acid (FA) profile of meat, but the effects of supplementation at different ages have been insufficiently studied. Hence, this study examined the effects of linseed supplementation and slaughter age on beef cattle carcass and meat quality, FA profile, and lipid oxidation. Eighty Simmental bulls (initial age 221 ± 9 days) were evenly allocated the experimental treatments, consisting of a control diet and a linseed-enriched diet (around 1% whole linseed) fed to the bulls until slaughter at 13 or 17 months of age, in a 2 × 2 factorial design. After slaughter, carcass traits, meat quality, FA profile, and oxidative stability (TBARS test) of the longissimus thoracis muscle were determined. Linseed feeding increased the dressing percentage (p < 0.01) at both slaughter ages but had limited effects on overall carcass and meat quality. The intramuscular fat of linseed-fed bulls contained less saturated FA (p < 0.01) and more beneficial n-3 PUFAs, such as eicosapentaenoic (p < 0.05) and α-linolenic acid (p < 0.001), especially in younger bulls. Although the atherogenic index and n-6/n-3 ratio improved, they remained above the recommended values. Lipid oxidation was higher in linseed-fed (p < 0.05) and younger bulls (p < 0.001). These results suggest that linseed supplementation can improve the beef's FA composition, but higher levels, especially in older animals, and antioxidant strategies may be required to optimise meat stability and nutritional value.

Supplementation of recombinant human lysozyme into diets affects the growth performance, muscle quality, immunity and intestinal microbiota in large yellow croaker Larimichthyscrocea

The aim of the present study was to investigate the influence of supplementation of lysozyme (LZM) into diet on the growth performance, muscle quality, immunity, intestinal microbiota in large yellow croaker (Larimichthys crocea) with initial body weight of 194.5 ± 0.27 g. After a 70-day feeding trial, 6 experimental diets with LZM supplementation at 0 (LZM0), 10 (LZM10), 30 (LZM30), 50 (LZM50), 70 (LZM70) and 90 mg/kg (LZM90) were tested. Results showed that the fish in the LZM70 group exhibited the lowest feed conversion ratio and the highest weight gain (WG), along with the highest trypsin and Na+/K+ ATPase activities in intestine (P < 0.05). The LZM activity in serum and intestine was significantly reduced in all dietary LZM supplemented groups compared to the LZM0 group (P < 0.05). Compared with that in the LZM0 group, the gene expressions of claudin 11, bcl-2, nlrp 3, tnf α, il-10 and tgf β in intestine in the LZM90 group were significantly elevated, while bax and caspase3 were significantly downregulated (P < 0.05). Meanwhile, the group supplemented with 90 mg/kg of dietary LZM also increased muscle crude lipid content, springiness and drip loss, along with decreased crude protein content, shear force and hardness compared with other groups (P < 0.05). Furthermore, the results of intestinal microbiota showed that compared to those in the LZM0 group, relative abundances of Fusobacterium in the LZM30 and LZM90 groups were decreased, and the relative abundances of Achromobacter, Mycoplasma and Cetobacterium were increased. In conclusion, appropriate supplementation of LZM in diet promoted the growth performance, improved immunity, adjusted intestinal microbiota and muscle quality of large yellow croaker. Furthermore, the optimal level of dietary LZM supplementation for large yellow croaker was estimated to be 67.14 mg/kg based on the quadratic regression for WG.

Tenderness in meat and meat alternatives: Structural and processing fundamentals

The demand for meat alternatives based on ingredients sourced from nonanimal materials with equivalent quality of muscle tissue is increasing. As more consumers switch to meat alternatives, a growing body of research has investigated the tenderness and related texture attributes in plant-based meats to increase consumer acceptance. A deeper understanding of tenderness including the differences and similarities between meat and meat alternatives is crucial to developing products that meet consumer expectations, as it directly influences consumer acceptance. Meat tenderness is commonly quantified using sensory evaluation and instrumental tests and is influenced by various factors such as the intrinsic features of the animal before the slaughter, naturally occurring proteolysis during the post-slaughter process, and several tenderization techniques. In contrast, meat alternative tenderness can be actively tailored through the selection of ingredients and the operating conditions of the structuring process. Especially, extrusion parameters such as moisture content and barrel temperature can greatly modulate tenderness-related attributes. Postprocessing methods that have traditionally been utilized for tenderizing have also been applied to meat alternatives, but more studies are needed to fully reveal the underlying mechanisms. This review offers an overview and critical discussion on tenderness, covering the structural origins, influencing factors, analytical methods, oral processing, and tenderization processes for both meat and meat alternatives. The discussion is based on the existing knowledge of muscle tissue, which evolves to critically reviewing how this understanding can be applied to the textural attributes of meat alternatives and what kind of novel tenderization techniques can be developed for these new sustainable food products.

A Review on the Application of Animal-Based Materials Using Three-Dimensional (3D) Printing and Protein Restructuring Technologies

Production of alternative proteins is crucial for the development of future protein resources. This study explored the creation of sustainable animal resources by combining extrusion molding and three-dimensional (3D) printing technologies. Extrusion effectively organizes vegetable proteins at high temperatures and pressures to replicate meat-like textures, and high-moisture extrusion successfully mimics the fiber structure of conventional meat. However, many meat analogs products still differ from conventional meat in terms of sensory properties such as texture, juiciness, and flavor, indicating the need for quality improvement. Researchers have leveraged 3D printing technology to incorporate fat analogs and enhance the appearance and texture through muscle fiber simulation. This technology allows for precise arrangement of muscle fibers, formation of adipose tissue, and marbling, thereby improving the overall sensory experience. By combining extrusion and 3D printing, we can enhance the nutritional and organoleptic qualities of meat analogs, ultimately meeting consumer expectations and achieving a balance between plant- and animal-based materials.

Muscle-Specific Effects of Genotype, Animal Age, and Wet Aging Duration on Beef Color, Tenderness, and Sensory Characteristics

This study investigated the effects of genotype, animal age, muscle type, and aging duration on meat quality characteristics of Psoas major (PM), Longissimus thoracis (LT), Longissimus lumborum (LL), and Gluteus Medius (GM) muscles. The PM, LT, LL, and GM muscles were sourced from a total of 32 bulls, consisting of 16 humped (Bos indicus) and 16 humpless (Bos indicus × Bos taurus) bulls aged 21 ± 2 and 30 ± 3 months. The muscles underwent aging durations of 0, 7, and 14 days. Meat pH, color, drip loss, cooking loss, instrumental shear force, lipid oxidation (thiobarbituric acid reactive substances/TBARS), and sensory analysis were performed. Our results indicated that humped bulls had superior color, while humpless bulls exhibited better sensory characteristics. The 30 ± 3 months of age bulls showed improved color and sensory characteristics with higher TBARs values than the 21 ± 2 months of age bulls. The color, tenderness, and sensory characteristics improved in PM and LT at 7 days, whereas in LL and GM they improved at 14 days. PM showed better tenderness and overall acceptability among different muscles, while LL showed better color and oxidative stability. This study suggested the necessity of muscle-specific aging strategies to enhance the meat quality characteristics of humped and humpless bulls. Further research could explore additional aging durations and other muscle types to better understand their impact on meat quality characteristics.

Does transport affect the eating quality potential of beef from Limousin cows in France? - A case study

We hypothesized that transportation might impact beef sensory quality, particularly as the distance between farms and the slaughterhouse increases. Specifically, we expected that pre-slaughter transport over longer distances would induce stress in the cattle, resulting in elevated ultimate pH and, consequently, reduced beef quality. Thus, this study aimed to specifically study the effects of transport in commercial conditions of Limousin cows from farms located in different areas of France to slaughter on ultimate pH (pHu) measured in the Longissimus thoracis muscle (LT), marbling (two major factors affecting eating quality) and the MSA Index (a global indicator of potential eating quality at the carcass level). Cattle were studied according to distance (<50 km; between 50 and 150 km; and between 150 and 250 km from the slaughterhouse) and according to transport time from the farm to the slaughterhouse (divided into short, moderate, and extended). We found that neither distance nor transport time significantly affected pHu of beef and the other studied parameters (cold carcass weight, meat color, MSA Marbling and MSA Index). Consequently, in our commercial conditions, we concluded that the effects of transport on beef carcasses and beef eating quality of Limousin cows are negligible.

Exploring the Nexus of Feeding and Processing: Implications for Meat Quality and Sensory Perception

The intrinsic quality of meat is directly related to muscle and fat tissues. Factors such as the rate and extent of anaerobic glycolysis affect muscle pH, influencing the meat's color, water holding, and texture. Postmortem anomalies can result in deviations from this intrinsic quality. The animals' diet plays a crucial role in meat quality. Specific nutrients, such as proteins, vitamins, and minerals, affect meat's texture, flavor, and juiciness. Feeds rich in omega-3 fatty acids can improve the sensorial quality of meat. Meat processing and methods such as aging, marinating, and cooking affect the texture, flavor, and juiciness, which can be evaluated by specific equipment or trained or untrained consumers. This comprehensive review investigates the relationship between animal feeding practices and meat processing techniques and their combined impact on meat quality and sensory perception. By synthesizing recent research, we explore how various feeding protocols (including diet composition and feed additives) and processing methods shape meat products' nutritional value, texture, flavor profile, and overall consumer appeal. Understanding this nexus is crucial for optimizing meat quality while ensuring sustainability and safety in the food supply chain.

A review of emerging technologies, nutritional practices, and management strategies to improve intramuscular fat composition in beef cattle

The flavour, tenderness and juiciness of the beef are all impacted by the composition of the intramuscular fat (IMF), which is a key determinant of beef quality. Thus, enhancing the IMF composition of beef cattle has become a major area of research. Consequently, the aim of this paper was to provide insight and synthesis into the emerging technologies, nutritional practices and management strategies to improve IMF composition in beef cattle. This review paper examined the current knowledge of management techniques and nutritional approaches relevant to cattle farming in the beef industry. It includes a thorough investigation of animal handling, weaning age, castration, breed selection, sex determination, environmental factors, grazing methods, slaughter weight and age. Additionally, it rigorously explored dietary energy levels and optimization of fatty acid profiles, as well as the use of feed additives and hormone implant techniques with their associated regulations. The paper also delved into emerging technologies that are shaping future beef production, such as genomic selection methods, genome editing techniques, epigenomic analyses, microbiome manipulation strategies, transcriptomic profiling approaches and metabolomics analyses. In conclusion, a holistic approach combining genomic, nutritional and management strategies is imperative for achieving targeted IMF content and ensuring high-quality beef production.

Insight into Pelargonium odoratissimum Essential Oil Preservative Properties Effect on Ground Beef

Pelargonium plants are very popular and well-known for their essential oils (EOs), which are used for medicinal purposes and in food. This study focused on the EO of Pelargonium odoratissimum. First, its composition and antioxidant and antimicrobial activity were evaluated, and finally, its efficacy as a natural preservative in ground beef was tested. The main EO constituents were citronellol (40.0%), nerol (15.3%), and citronellyl formate (12.6%). The antibacterial activity of POEO showed that Enterococcus faecalis ATCC 29212 was the most susceptible strain compared to the other eight strains tested. The antioxidant activity, as measured by the DPPH assay, showed a dose-dependent effect with an IC50 comparable to the standard used, gallic acid. Aerobic plate count, psychotropic bacteria, and Enterobacteriaceae, including Salmonella, were reduced by the addition of Pelargonium odoratissimum essential oils. The oxidative stability was significantly improved compared to the untreated sample. Additionally, the results for metmyoglobin demonstrated a notable preservative effect on sensory properties, including appearance, odor, color, and overall acceptability. The ability to discriminate between all samples and correlate protein and lipid oxidation processes, microbiological characteristics, and sensory measurements was made possible by principal component analysis and heat maps. This research shows the potential benefits of using POEO in the preservation of ground beef by effectively extending shelf life and improving product safety.

The Impact of Storytelling about an Innovative and Sustainable Organic Beef Production System on Product Acceptance, Preference, and Satisfaction

Food labels and storytelling are marketing tools used by the food industry to highlight and communicate important product characteristics to consumers. By using these tools, food companies can influence consumers' attitudes toward the product and potentially the likelihood of purchase. In the present study, we investigated how storytelling about an innovative and sustainable organic beef production system influenced participants' preference and acceptance of a veal steak product and, further, if some information characteristics were more important than others for consumer satisfaction. Without being aware that the samples were identical, participants (n = 224) tasted two veal steak samples: one steak sample was presented with information about the production system, and the other without information. Results showed that when the steak sample was presented with product information, compared to without information, it received significantly higher hedonic ratings (overall liking, liking of flavor, and liking of texture). This was likewise reflected in a greater preference for the steak sample when presented with product information. Furthermore, product information was found to positively impact the participants' satisfaction with the steak sample regardless of their preference. Overall, our results suggest that the use of storytelling about the innovative and sustainable product system for veal steaks can positively influence consumers' attitudes toward the product.

Leveraging Functional Genomics for Understanding Beef Quality Complexities and Breeding Beef Cattle for Improved Meat Quality

Consumer perception of beef is heavily influenced by overall meat quality, a critical factor in the cattle industry. Genomics has the potential to improve important beef quality traits and identify genetic markers and causal variants associated with these traits through genomic selection (GS) and genome-wide association studies (GWAS) approaches. Transcriptomics, proteomics, and metabolomics provide insights into underlying genetic mechanisms by identifying differentially expressed genes, proteins, and metabolic pathways linked to quality traits, complementing GWAS data. Leveraging these functional genomics techniques can optimize beef cattle breeding for enhanced quality traits to meet high-quality beef demand. This paper provides a comprehensive overview of the current state of applications of omics technologies in uncovering functional variants underlying beef quality complexities. By highlighting the latest findings from GWAS, GS, transcriptomics, proteomics, and metabolomics studies, this work seeks to serve as a valuable resource for fostering a deeper understanding of the complex relationships between genetics, gene expression, protein dynamics, and metabolic pathways in shaping beef quality.

Quality Properties and Flavor-Related Components of Beef Longissimus Lumborum Muscle from Four Korean Native Cattle Breeds

This study was carried out to assess the quality properties, components associated with taste and aroma of beef as a function of breed. For this purpose, steers from four Korean native cattle breeds: Hanwoo (n=10), Chikso (n=10), black Hanwoo (n=12, BHW) and Jeju black cattle (n=12, JBC) were used. The steers all were raised under identical conditions and finished at a similar age of around 30-months old. Following 24 h of slaughter, all longissimus lumborum muscles were collected and used for analysis of meat quality, fatty acids, and flavor-related components (metabolic compounds, free amino acids, and aroma volatiles). The Hanwoo presented a significantly higher intramuscular fat content (IMF, 22.85%) than the BHW (11.78%), Chikso (9.25%), and JBC (9.14%; p<0.05). The meat of Hanwoo breed showed lighter and redder color, and lower shear force value (p<0.05). The JBC presented a "healthier" fatty acid profiles as it had a higher total unsaturated fatty acids content (p<0.05). With regard to flavor-related components, Hanwoo also had higher total contents of free amino acids and metabolites associated with umami and sweet tastes, and fat-derived volatile compounds (aldehydes, alcohols, and ketones) associated with fatty aroma. It may be concluded that there was a considerable difference in the meat quality properties among breeds. The variations of IMF content and flavor-related components may be the main factors contributing to the typical flavors of beef among the four Korean native cattle breeds.

Modeling of Ethiopian Beef Meat Marbling Score Using Image Processing for Rapid Meat Grading

Meat characterized by a high marbling value is typically anticipated to display enhanced sensory attributes. This study aimed to predict the marbling scores of rib-eye, steaks sourced from the Longissimus dorsi muscle of different cattle types, namely Boran, Senga, and Sheko, by employing digital image processing and machine-learning algorithms. Marbling was analyzed using digital image processing coupled with an extreme gradient boosting (GBoost) machine learning algorithm. Meat texture was assessed using a universal texture analyzer. Sensory characteristics of beef were evaluated through quantitative descriptive analysis with a trained panel of twenty. Using selected image features from digital image processing, the marbling score was predicted with R2 (prediction) = 0.83. Boran cattle had the highest fat content in sirloin and chuck cuts (12.68% and 12.40%, respectively), followed by Senga (11.59% and 11.56%) and Sheko (11.40% and 11.17%). Tenderness scores for sirloin and chuck cuts differed among the three breeds: Boran (7.06 ± 2.75 and 3.81 ± 2.24, respectively), Senga (5.54 ± 1.90 and 5.25 ± 2.47), and Sheko (5.43 ± 2.76 and 6.33 ± 2.28 Nmm). Sheko and Senga had similar sensory attributes. Marbling scores were higher in Boran (4.28 ± 1.43 and 3.68 ± 1.21) and Senga (2.88 ± 0.69 and 2.83 ± 0.98) compared to Sheko (2.73 ± 1.28 and 2.90 ± 1.52). The study achieved a remarkable milestone in developing a digital tool for predicting marbling scores of Ethiopian beef breeds. Furthermore, the relationship between quality attributes and beef marbling score has been verified. After further validation, the output of this research can be utilized in the meat industry and quality control authorities.

A review of the role of epigenetic studies for intramuscular fat deposition in beef cattle

Intramuscular fat (IMF) deposition profoundly influences meat quality and economic value in beef cattle production. Meanwhile, contemporary developments in epigenetics have opened new outlooks for understanding the molecular basics of IMF regulation, and it has become a key area of research for world scholars. Therefore, the aim of this paper was to provide insight and synthesis into the intricate relationship between epigenetic mechanisms and IMF deposition in beef cattle. The methodology involves a thorough analysis of existing literature, including pertinent books, academic journals, and online resources, to provide a comprehensive overview of the role of epigenetic studies in IMF deposition in beef cattle. This review summarizes the contemporary studies in epigenetic mechanisms in IMF regulation, high-resolution epigenomic mapping, single-cell epigenomics, multi-omics integration, epigenome editing approaches, longitudinal studies in cattle growth, environmental epigenetics, machine learning in epigenetics, ethical and regulatory considerations, and translation to industry practices from perspectives of IMF deposition in beef cattle. Moreover, this paper highlights DNA methylation, histone modifications, acetylation, phosphorylation, ubiquitylation, non-coding RNAs, DNA hydroxymethylation, epigenetic readers, writers, and erasers, chromatin immunoprecipitation followed by sequencing, whole genome bisulfite sequencing, epigenome-wide association studies, and their profound impact on the expression of crucial genes governing adipogenesis and lipid metabolism. Nutrition and stress also have significant influences on epigenetic modifications and IMF deposition. The key findings underscore the pivotal role of epigenetic studies in understanding and enhancing IMF deposition in beef cattle, with implications for precision livestock farming and ethical livestock management. In conclusion, this review highlights the crucial significance of epigenetic pathways and environmental factors in affecting IMF deposition in beef cattle, providing insightful information for improving the economics and meat quality of cattle production.

Determining muscle plasticity and meat quality development of low-input extended fed market-ready steers

In March 2020, the World Health Organization declared COVID-19 a pandemic, which ultimately led to many meat processors temporarily shutting down or reducing processing capacity. This backlog in processing capacity forced many feedlots to retain cattle for longer periods of time and assume the risk of major market fluctuations. The aim of this study was to understand how a dietary insult affects meat quality and muscle metabolism in market-ready steers (590 kg). Sixteen market-ready (590 kg) commercial Angus crossbred steers were subjected to a maintenance diet of either forage or grain for 60 d. Longissimus lumborum (LL) muscle samples were collected immediately postmortem and processed for characteristics reflecting the underlying muscle fiber type and energy state of the tissue. Despite cattle being subjected to a 60-d feeding period, there were no detectable differences (P > 0.05) in carcass characteristics, color of lean, or ultimate pH (pHu). Moreover, our data show that muscle plasticity is rather resilient, as reflected by lack of significance (P > 0.05) in oxidative and glycolytic enzymes, myosin heavy chain isoforms (MyHC), myoglobin, and mitochondrial DNA (mtDNA) contents. These data show that market-ready steers are capable of withstanding a low-input feeding strategy up to 60 d without dramatically impacting underlying muscle characteristics and meat quality development.

Study on Ways to Improve the Quality of Black Goat Meat Jerky and Reduce Goaty Flavor through Various Spices

In this study, we analyzed the physicochemical and sensory properties of black goat jerky marinated with various spices (non-spice, control; rosemary, RO; basil, BA; ginger, GI; turmeric, TU; and garlic, GA). The physicochemical properties of black goat jerky analyzed were pH, water holding capacity, color, cooking yield, shear force, and fatty acid composition. The sensory characteristics were analyzed through the aroma profile (electronic nose), taste profile (electronic tongue), and sensory evaluation. The pH and water holding capacity of the GI showed higher values than the other samples. GI and GA showed similar values of CIE L* and CIE a* to that of the control. The shear force of the GI and TU was significantly lower than that of other samples (p<0.05). Regarding fatty acid composition, GI showed high unsaturated and low saturated fatty acid contents compared with that of the other samples except for RO (p<0.05). In the aroma profile, the peak area of hexanal, which is responsible for a faintly rancid odor, was lower in all treatment groups than in the control. In the taste profile, the umami of spice samples was higher than that of the control, and among the samples, GI had the highest score. In the sensory evaluation, the GI sample showed significantly higher scores than the control in terms of flavor, aroma, goaty flavor, and overall acceptability (p<0.05). Therefore, marinating black goat jerky with ginger powder enhanced the overall flavor and reduced the goat odor.

Strategies for Healthier Meat Foods: An Overview

Functional food products remain the focus of current market trends toward healthier nutrition. The consumption of meat-based functional foods has been a topic of interest in food innovation since some of these products generate controversy due to their possible adverse effects on health. However, studies have demonstrated that meat-based functional products are considered an opportunity to improve the nutritional profile of meat products through the addition of biologically valuable components and to meet the specific needs of consumers. In this sense, some strategies and techniques are applied for processing and developing functional meat products, such as modifying carcass composition through feeding, reformulating meat products, and processing conditions. This review focuses on presenting developed and evaluated strategies that allow the production of healthy and functional meat foods, which application has successfully achieved the sensory, nutritional, and technological parameters mainly affected by such application.

Multivariate Statistical Analysis for the Classification of Sausages Based on Physicochemical Attributes, Using Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS)

Sausage is a convenient food that is widely consumed in the world and in Vietnam. Due to the rapid development of this product, the authenticity of many famous brands has faded by the rise of adulteration. Therefore, in this study, principal component analysis (PCA) was combined with chemical analysis to identify 6 sausage brands. Sausage samples were dried and then ground to a fine powder for both instrumental analyses of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and inductively coupled plasma-mass spectrometry (ICP-MS). Dried measurements of ATR-FTIR was performed directly on the ZnSe crystal, while elemental data were obtained through microwave digestion before the ICP-MS analysis. Principal component analysis (PCA) within the framework software of XLSTAT and STATISTICA 12 was performed on the spectroscopy and elemental dataset of sausage samples. PCA visualized the distinction of 6 sausage brands on both datasets of ATR-FTIR and ICP-MS. The classification on the spectroscopy profile showed that although more than 90% variation of the dataset was explained on the first two PCs, the difference between several brands was not detected as the distribution of data overlapped with one another. The PCA observation of the elemental composition on PC1 and PC3 has separated the sausage brands into 6 distinctive groups. Besides, several key elements contributed to the brands' identification have been detected, and the most distinctive elements are Na, K, Ca, and Ba. PCA visualization showed the feasibility of the classification of sausage samples from different brands when combined with the results of FT-IR and ICP-MS methods. The experiment was able to differentiate the sausages from the 5 brands using multivariate statistics.

The impact of ultrasound treatment on glycolytic enzymes when applied to crude extracts from early post-mortem bovine muscle

The rate of pH decline post - mortem and its interaction with temperature influences the final tenderness of meat, and therefore, the manipulation of the rate of pH decline is a strategy of interest in order to obtain consistent high quality meat. Ultrasound is a potential early post - mortem carcass intervention, which may alter the rate of glycolysis based on its ability to alter enzyme activity. In this study, homogenates (prepared from early post-mortem Longissimus thoracis et lumborum muscle) were subjected to different ultrasound intensities (0 %/60 %/100 % amp) and treatment durations (15/ 30 min). The effect of these treatments on the inherent activity of the glycolytic enzymes was investigated using an in vitro glycolytic buffer model system. It was found that ultrasound treatment intensity and duration had a significant interactive effect on the rate of pH decline, and on reducing sugars and lactic acid concentrations, specifically following the 100 % amp ultrasound for 30 min treatment and between 30 and 240 min incubation. No significant differences in pH or metabolites content were observed between treatments after 1440 min of incubation. No effect of ultrasound intensity or treatment duration was observed on the degradation of glycogen. Under the reported conditions of this trial, it can be concluded that the application of ultrasound has limited potential to have an impact on the glycolytic pathways in bovine muscle.

Sustainable pig diets: partial grain replacement with former food products and its impact on meat quality

This study investigated the effects of salty and sugary former foodstuff products (FFPs) on the quality traits and meat composition of 36 male castrated pigs (Swiss Large White breed) as well as sensory characteristics of the loins. The animals were fed three different diets for both the growing (G) and finishing (F) phases: (1) a standard diet (ST), 0% FFPs; (2) a diet with 30% of sugary FFPs (e.g., chocolate, biscuits, cakes) as a replacement for traditional ingredients (SU); and (3) a diet with 30% of salty FFPs (e.g., bread, pasta, and breadsticks) as a replacement for traditional ingredients (SA). For a comprehensive assessment of meat quality, protein and fat content in the LD were analyzed. AA and FA profile were determined both in the LD and backfat. Meat quality traits such as pH and temperature, thawing, cooking and drip losses, and shear force have been evaluated. Then, pork loins have been assessed for sensory attributes by a trained sensory panel. The SA diet decreased 20:5 n-3 levels (P < 0.001) in the muscle and 22:5 n-3 levels (P < 0.05) in both muscle and backfat but increased (P < 0.05) the ratio of mono-unsaturated to saturated fatty acids compared to the ST group. Both the SU and SA diets elevated (P < 0.001) the n-6:n-3 fatty acids ratio compared to the ST diet. Dietary treatments did not affect other meat quality traits. Regarding sensory attributes, the loin from pigs fed with SU and SA diets were sweeter (P < 0.001). Loins of SA pigs were more tender (P < 0.001), had a more intense pork aroma (P < 0.001) and had more flavor (P < 0.01) compared to ST loins. Overall, the use of FFPs affected the fatty acid profile of pork while improving the sensory quality of the loins, with no negative effects observed on the technological and nutritional quality of the meat.

Benchmarking the United States bison meat industry: stakeholder perceptions, production parameters, and live animal factors affecting meat quality

The objectives of this study were 1) to understand stakeholder perceptions regarding the bison industry, 2) to benchmark live animal characteristics and production parameters of the bison industry, and 3) to identify live animal factors related to animal welfare and their effect on specific quality characteristics of bison meat. A survey was conducted both online and in-person at the National Bison Association Winter Conference (2022). Descriptive statistics were performed on a total of 110 surveys. Most stakeholders (94%, n = 104) agreed that the industry should continue to grow, and the majority (99%, 108) agreed that animal welfare impacts meat quality. Facility design (80%, n = 88), animal handling (78%, 86), employee training (56%, 62), and transportation duration (56%, 62) were selected as the factors that affect animal welfare. More than half of the stakeholders selected flavor (67%, n = 74) as the most important quality attribute of bison meat. For the in-plant antemortem and postmortem parameters data was collected from three plants in the United States over the course of a year. A total of 2,284 bison (bulls: n = 1,101; cows: n = 199; heifers: n = 984) were included in the study. Antemortem measurements such as distance traveled, vocalization, prod use, mobility, and head bumps were measured, followed by postmortem measurements that included bruise score, live weight, dressing percentage, ribeye area, and instrumental color. Approximately 97% of bison (n = 2,213) had at least one bruise. The average distance traveled from producer to slaughter plant was (mean ± SD; 823 ± 583 km) and the average dressing percentage was (mean ± SD; 60.5 ± 3.3%). Average (mean ± SD) fat thickness and ribeye area were 1.4 ± 1.1 cm and 62.6 ± 9.8 cm2, respectively. Approximately 30% (n = 676) of the bison in this study head bumped between 1 and 5 times in the restraining chute or the single-file gate before being stunned. Linear regression indicated that differences in lean a* were associated with plant, number of head bumps in the chute, ribeye area, fat thickness, live weight, and sex class (P < 0.05). Logistic regression indicated that season, sex class, live weight, plant, and season were associated with differences (P < 0.05) in bruising. These results can be used as a baseline for current production parameters and serve as the foundation for future research to monitor improvement.

Assessment of beef sensory attributes and physicochemical characteristics: A comparative study of intermediate versus normal ultimate pH striploin cuts

The quality of beef, defined by key attributes such as the intrinsic sensory qualities texture, flavour, and juiciness, is shaped by various intrinsic and extrinsic factors. This study conducted a detailed examination of Nellore beef, focusing on two categories based on ultimate pH (pHu) levels: intermediate (pHu ≥ 5.8) and normal (pHu < 5.6) beef. A comprehensive approach was taken, involving twenty trained assessors who applied the Optimised Descriptive Profile (ODP) method to evaluate grilled striploin steak samples. In parallel, consumer preferences were measured through a hedonic test and a Check-all-that-apply (CATA) task, involving 135 participants. The ODP results revealed that the intermediate pHu samples were juicier (P < 0.05) compared to the normal pHu group. The CATA analysis highlighted differences in both intermediate and normal pHu beef, especially in juiciness, a crucial factor for consumer satisfaction. Notably, variations in deoxymyoglobin content linked to ageing were observed, with higher levels at the 3rd day compared to the 28th day, especially in the intermediate pHu samples (P < 0.05). Moreover, colour-related aspects such as L*, b*, chroma (C*), and oxymyoglobin were significantly influenced (P < 0.05) by both the pHu category and ageing time. Regarding consumer acceptance, the study found no significant difference in perception between the intermediate and normal pHu groups (P > 0.05). These findings revealed the complex interactions between pHu levels, sensory characteristics, and consumer preferences in beef quality, offering valuable insights for both the industry and research community.

Does transport stress have any effect on carcass quality of Nellore cattle (Bos taurus indicus) in Brazil? - A case study

With the increasing concomitant demands for Brazilian beef and in particular high-quality beef, there is a need for observational studies of the effects of pre- and post-slaughter practices on beef carcass traits. We hypothesized in our case study that pre-slaughter transport of bovines over significant distances would induce stress in animals, and that this would reduce carcass quality because of higher pH resulting from long-distance transportation. To test this hypothesis, 30,230 Nellore carcasses from a private slaughterhouse were evaluated 24 h postmortem. Analysis showed correlations between animal maturity, ultimate pH, distance, and carcass weight. More precisely, there was a slight positive correlation between ultimate pH and weight (but not with transportation distance) and a slight positive correlation between maturity and weight. A linear regression model (R2 = 0.016) failed to show distance having a significant effect on ultimate pH (P = 0.63), while carcass weight significantly affected ultimate pH (P < 0.001) with a low coefficient of 0.0003. Maturity negatively affected ultimate pH also (P < 0.001) but with also a small effect (-0.0008). Results (from 95% confidence intervals of variance of the random effects and of the random errors) showed that the variability within farms was higher than between farms. The linear mixed model showed that maturity had a significant effect on carcass weight value (P < 0.001) with a large coefficient of 2.90. The R2 of the linear mixed model was 46.03%. In conclusion, while weight and maturity both affect ultimate pH, long distances did not significantly impact ultimate pH and therefore the beef quality from Nellore cattle. This could be because of low stress during transport, as well as the physical characteristics of the Nellore breed that favor greater resistance to tropical climatic conditions.

Impact of bushfires on Australian livestock health, welfare and carcase quality

The 2019/2020 Australian bushfires were unprecedented in terms of total area burned and impact on livestock and wildlife populations. However, there is currently limited literature available relating the consequences of bushfire or smoke exposure to livestock health, welfare, and carcase quality. A retrospective cross-sectional study was conducted using historical monitoring data from a Meat Standards Australia (MSA) accredited abattoir located on the mid-north coast of New South Wales, Australia. The spatiotemporal association between exposure to bushfire smoke (specifically the duration of the bushfires, distance from closest bushfire, annual bushfire season, proportion of the property of origin burned during the bushfires and time frame since exposure to bushfires) and effects on carcase meat quality metrics and pathology were measured, by building linear, generalised linear and cumulative link mixed models. Our findings indicate that hot carcase weight increased as the distance between the property of origin and the closest bushfire became greater and decreased with exposure to bushfires of longer duration or when greater proportions of the property of origin were burnt during bushfires. Subcutaneous rib fat of carcases also increased with an increasing distance of properties from the closest recorded bushfire and decreased with exposure to bushfires during the 2019/2020 season. Higher meat colour scores (darker meat colour) were associated with exposure to bushfires during the 2019/2020 season and exposure to bushfires of longer durations. There was only a weak association between increasing distance to the closest bushfire and higher marbling scores. Evidence of pneumonia in carcases was associated with exposure to bushfires of longer duration, specifically increasing risk of pneumonia was associated with fires of longer durations. Greater periods of time since exposure (i.e., >6 months) to bushfires were also associated with a higher risk of evidence of pneumonia at the time of processing. With increasing incidence of bushfires in Australia forecasted as a result of climate change, there is an urgent need to understand the impact of bushfires on livestock, to limit the effects on livestock health and mitigate the risk of significant socioeconomic impacts to the livestock industry. By providing a greater understanding of the impact of bushfires, the findings of this study can support producers to make informed decisions to mitigate the effects of bushfires on livestock health and carcase meat quality.

Astragalus polysaccharide improves the growth, meat quality, antioxidant capacity and bacterial resistance of Furong crucian carp (Furong carp♀ × red crucian carp♂)

To evaluate the functional effects of APS (Astragalus polysaccharide) on Furong crucian carp, APS-supplemented diets (0.00 %, 0.05 %, 0.10 % and 0.15 %) were prepared and utilized in feeding experiment. The results showed that the 0.05 % APS group has the highest weight gain rate and specific growth rate, and the lowest feed coefficient rate. In addition, 0.05 % APS supplement could improve muscle elasticity, adhesiveness and chewiness. Moreover, the 0.15 % APS group had the highest spleen-somatic index and the 0.05 % group had the maximum intestinal villus length. 0.05 % and 0.10 % APS addition significantly increased T-AOC and CAT activities while MDA contents decreased in all APS groups. The plasma TNF-α levels in all APS groups significantly increased (P<0.05), and the 0.05 % group showed the highest TNF-α level in spleen. In APS addition groups, the tlr8, lgp2 and mda5 gene expressions were significantly elevated, while xbp1, caspase-2 and caspase-9 expressions decreased in uninfected and A. hydrophila-infected fish. Finally, higher survival rate and slower disease outbreak rate were observed in APS-supplemented groups after being infected by A. hydrophila. In conclusion, Furong crucian carp fed by APS-supplemented diets possesses elevated weight gain rate and specific growth rate, and improved meat quality, immunity and disease resistance.

A South African beef quality survey

In this study a survey of various meat quality characteristics of beef loin cuts was conducted in the City of Tshwane Metropolitan Municipality (Gauteng Province of South Africa) to determine the variation and consistency of beef quality of products purchased over time. Four hundred and twenty beef loin samples were collected on 20 occasions over 308 days from 13 outlets of 2 supplier types (butcher and supermarket). Packaging type, label information and price were considered for the evaluation of meat tenderness, colour, cooking loss, tissue composition and steak thickness. The results demonstrate that large variation in characteristics relevant to consumers' choice and satisfaction among and within different products sold as porterhouse steak in South Africa. In particular, muscle tenderness varied (P < 0.0001) across the 20 products and also showed significant inconsistency over the 20 purchasing events for certain products.

Physicochemical Properties of Black Korean Goat Meat with Various Slaughter Ages

This study was conducted to analyze the physicochemical properties of black goat meat according to the slaughter age (3, 6, 9, 12, 24, 36 months). The moisture content tended to decrease, whereas the fat content, pH, and free amino acid composition tended to increase with increasing slaughter age. The collagen content increased significantly with the increasing slaughter age (p < 0.05). The cooking yield showed a tendency to increase up to 12 months of age, and there was no significant difference after 12 months of age. In all mineral contents, the sample for 12 months of age showed higher values than the others. Considering fatty acid composition, the saturated fatty acid content of the 12-month sample had a lower value than the other samples. However, the unsaturated fatty acid of the 12-month sample had higher values than the other samples. Therefore, the best slaughter age for black goats occurs at 12 months of age when nutrition is excellent.

Variations in the Metabolome of Unaged and Aged Beef from Black-and-White Cows and Heifers by 1H NMR Spectroscopy

(1) Background: The selection of raw material and the postmortem processing of beef influence its quality, such as taste. In this study, the metabolome of beef from cows and heifers is examined for differences during aging. (2) Methods: Thirty strip loins from eight heifers and seven cows (breed code: 01-SBT) were cut into ten pieces and aged for 0, 7, 14, 21 and 28 days. Samples from the left strip loins were wet-aged in vacuum, while samples from right strip loins were dry-aged at 2 °C and 75% relative humidity. The beef samples were extracted with methanol-chloroform-water, and the polar fraction was used for ¹H NMR analysis. (3) Results: The PCA and OPLS-DA showed that the metabolome of cows and heifers varied. Eight metabolites revealed significant differences (p < 0.05) in the samples from cows and heifers. The aging time and aging type of beef also affected the metabolome. Twenty-eight and 12 metabolites differed significantly (p < 0.05) with aging time and aging type, respectively. (4) Conclusions: The variations between cows and heifers and aging time affect the metabolome of beef. By comparison, the influence of aging type is present but less pronounced.

- Invited Review - Factors affecting beef quality and nutrigenomics of intramuscular adipose tissue deposition

Beef quality is characterized by marbling (marbling degree and marbling fineness), physiochemical (shear force, meat color, fat color, texture, and maturity), and sensory (tenderness, flavor, juiciness, taste, odor, and appearance) traits. This paper summarizes and addresses beef-quality characteristics and the beef-grading systems in Korea, Japan, the USA, and Australia. This paper summarizes recent research progresses on the genetic and nutritional factors that affect beef quality. Intramuscular (i.m.) adipose tissue deposition or marbling is a major determinant of beef quality. This paper addresses the mechanisms of i.m. adipose tissue deposition focused on adipogenesis and lipogenesis. We also address selected signaling pathways associated with i.m. adipose tissue deposition. Nutrients contribute to the cellular response and phenotypes through gene expression and metabolism. This paper addresses control of gene expression through several nutrients (carbohydrates, fat/fatty acids, vitamins, etc.) for i.m. adipose tissue deposition. Several transcription factors responsible for gene expression via nutrients are addressed. We introduce the concept of genome-based precision feeding in Korean cattle.

Effects of the Aging Period and Method on the Physicochemical, Microbiological and Rheological Characteristics of Two Cuts of Charolais Beef

Wet-aging (WA) and dry-aging (DA) methods are usually used in the beef industry to satisfy the consumers' tastes; however, these methods are not suitable for all anatomical cuts. In this study, WA and DA were applied to improve the quality of two cuts of Charolais beef (Longissimus dorsi and Semitendinosus). For 60 days (i.e., 2 days, 15 days, 30 days and 60 days of sampling), a physicochemical, rheological, and microbiological analysis were performed at WA (vacuum packed; temperature of 4 ± 1 °C) and at DA (air velocity of 0.5 m/s; temperature of 1 ± 1 °C; relative humidity of 78 ± 10%) conditions. The results showed that the aging method influenced the aging loss (higher in the DA), cooking loss (higher in the WA), malondialdehyde concentration (higher in the DA) and fatty acid profile (few changes). No differences in the drip loss and color were observed, which decreased after 30 days of aging. The WBSF and TPA test values changed with increasing an aging time showing that the aging improved the tenderness of meat regardless of the aging method. Moreover, the aging method does not influence the microbiological profile. In conclusion, both WA and DA enhanced the quality of the different beef cuts, suggesting that an optimal method-time and aging combination could be pursued to reach the consumers' preferences.

Recent Developments and Applications of Nanosystems in the Preservation of Meat and Meat Products

Due to their high water, lipid, and protein content, meat and meat products are highly perishable. The principal spoilage mechanisms involved are protein and lipid oxidation and deterioration caused by microbial growth. Therefore, efforts are ongoing to ensure food safety and increase shelf life. The development of low-cost, innovative, eco-friendly approaches, such as nanotechnology, using non-toxic, inexpensive, FDA-approved ingredients is reducing the incorporation of chemical additives while enhancing effectiveness and functionality. This review focuses on advances in the incorporation of natural additives that increase the shelf life of meat and meat products through the application of nanosystems. The main solvent-free preparation methods are reviewed, including those that involve mixing organic–inorganic or organic–organic compounds with such natural substances as essential oils and plant extracts. The performance of these additives is analyzed in terms of their antioxidant effect when applied directly to meat as edible coatings or marinades, and during manufacturing processes. The review concludes that nanotechnology represents an excellent option for the efficient design of new meat products with enhanced characteristics.