Critical Review on the Utilization of Handheld and Portable Raman Spectrometry in Meat Science

Critical review and recent advances of emerging real-time and non-destructive strategies for meat spoilage monitoring

Monitoring and evaluating food quality, especially meat quality, has received a growing interest to ensure human health and decrease waste of raw materials. Standard analytical approaches used for meat spoilage assessment suffer from time consumption, being labor-intensive, operation complexity, and destructiveness. To overcome shortfalls of these traditional methods and monitor spoilage microorganisms or related metabolites of meat products across the supply chain, emerging analysis devices/systems with higher sensitivity, better portability, on-line/in-line, non-destructive and cost-effective property are urgently needed. Herein, we first overview the basic concepts, causes, and critical monitoring indicators associated with meat spoilage. Then, the conventional detection methods for meat spoilage are outlined objectively in their strengths and weaknesses. In addition, we place the focus on the recent research advances of emerging non-destructive devices and systems for assessing meat spoilage. These novel strategies demonstrate their powerful potential in the real-time evaluation of meat spoilage.

Raman spectroscopy coupled with chemometrics for identification of adulteration and fraud in muscle foods: a review

Muscle foods, valued for their significant nutrient content such as high-quality protein, vitamins, and minerals, are vulnerable to adulteration and fraud, stemming from dishonest vendor practices and insufficient market oversight. Traditional analytical methods, often limited to laboratory-scale., may not effectively detect adulteration and fraud in complex applications. Raman spectroscopy (RS), encompassing techniques like Surface-enhanced RS (SERS), Dispersive RS (DRS), Fourier transform RS (FTRS), Resonance Raman spectroscopy (RRS), and Spatially offset RS (SORS) combined with chemometrics, presents a potent approach for both qualitative and quantitative analysis of muscle food adulteration. This technology is characterized by its efficiency, rapidity, and noninvasive nature. This paper systematically summarizes and comparatively analyzes RS technology principles, emphasizing its practicality and efficacy in detecting muscle food adulteration and fraud when combined with chemometrics. The paper also discusses the existing challenges and future prospects in this field, providing essential insights for reviews and scientific research in related fields.

Non-destructive prediction of colour and water-related properties of frozen/thawed beef meat by Raman spectroscopy coupled multivariate calibration

Freeze-thaw accelerated the colour deterioration of beef with the increase of colour b* and the decrease of colour a* values (P < 0.05). The maximum exudate loss reached 22 % after the seventh freeze-thaw. A strong correlation between the transversal relaxation time T₂₁ and thawing loss may mean that T₂₁ water contributed to the exudate loss during freeze-thaw. Afterwards, competitive adaptive reweighted sampling-partial least square (CARS-PLS) has the best prediction in thawing loss of frozen/thawed beef with correlation coefficients of prediction (R_p) of 0.971, and root mean square error of prediction (RMSEP) of 1.436. Besides, Uninformative variable elimination-partial least squares (UVE-PLS) showed good prediction effects on colour values (R_p = 0.932 - 0.994) and water content (R_p = 0.928, RMSEP = 0.582) of frozen/thawed beef. Therefore, this work demonstrated that Raman spectroscopy coupled with multivariate calibration has a good ability for non-destructive prediction in colour and water-related properties of frozen/thawed beef.

Adulteration detection in minced beef using low-cost color imaging system coupled with deep neural network

Major processed meat products, including minced beef, are one of the favorite ingredients of most people because they are high in protein, vitamins, and minerals. The high demand and high prices make processed meat products vulnerable to adulteration. In addition, eliminating morphological attributes makes the authenticity of minced beef challenging to identify with the naked eye. This paper aims to describe the feasibility study of adulteration detection in minced beef using a low-cost imaging system coupled with a deep neural network. The proposed method was expected to be able to detect minced beef adulteration. There were 500 captured images of minced beef samples. Then, there were 24 color and textural features retrieved from the image. The samples were then labeled and evaluated. A deep neural network (DNN) was developed and investigated to support classification. The proposed DNN was also compared to six machine learning algorithms in the form of accuracy, precision, and sensitivity of classification. The feature importance analysis was also performed to obtain the most impacted features to classification results. The DNN model classification accuracy was 98.00% without feature selection and 99.33% with feature selection. The proposed DNN has the best performance with individual accuracy of up to 99.33%, a precision of up to 98.68%, and a sensitivity of up to 98.67%. This work shows the enormous potential application of a low-cost imaging system coupled with DNN to rapidly detect adulterants in minced beef with high performance.

Recent advances in the application of Raman spectroscopy for fish quality and safety analysis

Fish is one of the highly demanded aquatic products, and its quality and safety play a pivotal role in daily diet. However, the possible hazardous substance in perishable fish both in pre- and postharvest periods may decrease their values and pose a threat to public health. Laborious and expensive traditional methods drive the need of developing effective tools for detecting fish quality and safety properties in a rapid, nondestructive, and effective manner. Recent advances in Raman spectroscopy (RS) and surface-enhanced Raman scattering (SERS) have shown enormous potential in various aspects, which largely boost their applications in fish quality and safety evaluation. They have incomparable merits such as providing molecule fingerprint information and allowing for rapid, sensitive, and noninvasive detection with simple sample preparation. This review provides a comprehensive overview focusing on the applications of RS and SERS for fish quality assessment and safety inspection, highlighting the hazardous substance and illegal behavior both in preharvest (veterinary drug residues and environmental pollutants) and postharvest (freshness and illegal behavior) particularly. Moreover, challenges and prospects are also proposed to facilitate the vigorous development of RS and SERS. This review is aimed to emphasize potential opportunities for applying RS and SERS as promising techniques for routine food quality and safety detection. PRACTICAL APPLICATION: With these applications, it can be clearly indicated that RS and SERS are promising and powerful in fish quality and safety surveillance, thereby reducing the occurrence of commercial fraud and food safety issues. More efforts still should be concentrated on exploiting the high-performance Raman instruments, establishing a universal Raman database, developing reproducible SERS substrates and combing RS with other versatile spectral techniques to promote these technologies from laboratory to practice. It is hoped that this review should arouse more research interests in RS and SERS technologies for fish quality and safety surveillance, as well as provide more insights to make a breakthrough.

Optical detection of microplastics in water

Unfortunately, the plastic pollution increases at an exponential rate and drastically endangers the marine ecosystem. According to World Health Organization (WHO), microplastics in drinking water have become a concern and may be a risk to human health. One of the major efforts to fight against this problem is developing easy-to-use, low-cost, portable microplastic detection systems. To address this issue, here, we present our prototype device based on an optical system that can help detect the microplastics in water. This system that costs less than $370 is essentially a low-cost Raman spectrometer. It includes a collimated laser (5 mW), a sample holder, a notch filter, a diffraction grating, and a CCD sensor all integrated in a 3D printed case. Our experiments show that our system is capable of detecting microplastics in water having a concentration less than 0.015% w/v. We believe that the designed portable device can find a widespread use all over the world to monitor the microplastic content in an easier and cost-effective manner.

Handheld Devices for Food Authentication and Their Applications: A Review

This review summarises miniaturised technologies, commercially available devices, and device applications for food authentication or measurement of features that could potentially be used for authentication. We first focus on the handheld technologies and their generic characteristics: (1) technology types available, (2) their design and mode of operation, and (3) data handling and output systems. Subsequently, applications are reviewed according to commodity type for products of animal and plant origin. The 150 applications of commercial, handheld devices involve a large variety of technologies, such as various types of spectroscopy, imaging, and sensor arrays. The majority of applications, ~60%, aim at food products of plant origin. The technologies are not specifically aimed at certain commodities or product features, and no single technology can be applied for authentication of all commodities. Nevertheless, many useful applications have been developed for many food commodities. However, the use of these applications in practice is still in its infancy. This is largely because for each single application, new spectral databases need to be built and maintained. Therefore, apart from developing applications, a focus on sharing and re-use of data and calibration transfers is pivotal to remove this bottleneck and to increase the implementation of these technologies in practice.

Smartphone-based handheld Raman spectrometer and machine learning for essential oil quality evaluation

We present a method, utilising a smartphone-based miniaturized Raman spectrometer and machine learning for the fast identification and discrimination of adulterated essential oils (EOs). Firstly, the approach was evaluated for discrimination of pure EOs from those adulterated with solvent, namely benzyl alcohol. In the case of ylang-ylang EO, three different types of adulteration were examined, adulteration with solvent, cheaper vegetable oil and a lower price EO. Random Forest and partial least square discrimination analysis (PLS-DA) showed excellent performance in discriminating pure from adulterated EOs, whilst the same time identifying the type of adulteration. Also, utilising partial least squares regression analysis (PLS) all adulterants, namely benzyl alcohol, vegetable oil and lower price EO, were quantified based on spectra recorded using the smartphone Raman spectrometer, with relative error of prediction (REP) being between 2.41-7.59%.

Non-Invasive Monitoring of Ethanol and Methanol Levels in Grape-Derived Pisco Distillate by Vibrational Spectroscopy

Handheld Raman and portable FT-IR spectroscopy devices were evaluated for fast and non-invasive determination of methanol and ethanol levels in Peruvian Pisco. Commercial Peruvian Pisco (n = 171) samples were kindly provided by the UNALM Alliance for Research in Alcohol and its Derivatives (Lima, Peru) and supplemented by purchases at grocery and online stores. Pisco spectra were collected on handheld Raman spectrometers equipped with either a 1064 nm or a 785 nm excitation laser and a portable infrared unit operating in transmission mode. The alcohol levels were determined by GC-MS. Calibration models used partial least-squares regression (PLSR) to develop prediction algorithms. GC-MS data revealed that 10% of Pisco samples had ethanol levels lower than 38%, indicating possible water dilution. Methanol levels ranged from 10 to 130 mg/100 mL, well below the maximum levels allowed for fruit brandies. Handheld Raman equipped with a 1064 nm excitation laser gave the best results for determining ethanol (SEP = 1.2%; RPre = 0.95) and methanol (SEP = 1.8 mg/100 mL; RPre = 0.93). Randomly selected Pisco samples were spiked with methanol (75 to 2800 mg/100 mL), and their Raman spectra were collected through their genuine commercial bottles. The prediction models gave an excellent performance (SEP = 98 mg/100 mL; RPre = 0.97), allowing for the non-destructive and non-contact determination of methanol and ethanol concentrations without opening the bottles.

In Situ Water Quantification in Natural Deep Eutectic Solvents Using Portable Raman Spectroscopy

Raman spectroscopy is a label-free, non-destructive, non-invasive analytical tool that provides insight into the molecular composition of samples with minimum or no sample preparation. The increased availability of commercial portable Raman devices presents a potentially easy and convenient analytical solution for day-to-day analysis in laboratories and production lines. However, their performance for highly specific and sensitive analysis applications has not been extensively evaluated. This study performs a direct comparison of such a commercially available, portable Raman system, with a research grade Raman microscope system for the analysis of water content of Natural Deep Eutectic Solvents (NADES). NADES are renewable, biodegradable and easily tunable “green” solvents, outcompeting existing organic solvents for applications in extraction from biomass, biocatalysis, and nanoparticle synthesis. Water content in NADES is, however, a critical parameter, affecting their properties, optimal use and extraction efficiency. In the present study, portable Raman spectroscopy coupled with Partial Least Squares Regression (PLSR) is investigated for rapid determination of water content in NADES samples in situ, i.e., directly in glassware. Three NADES systems, namely Betaine Glycerol (BG), Choline Chloride Glycerol (CCG) and Glucose Glycerol (GG), containing a range of water concentrations between 0% (w/w) and 28.5% (w/w), were studied. The results are directly compared with previously published studies of the same systems, using a research grade Raman microscope. PLSR results demonstrate the reliability of the analysis, surrendering R² values above 0.99. Root Mean Square Errors Prediction (RMSEP) of 0.6805%, 0.9859% and 1.2907% w/w were found for respectively unknown CCG, BG and GG samples using the portable device compared to 0.4715%, 0.3437% and 0.7409% w/w previously obtained by analysis in quartz cuvettes with a Raman confocal microscope. Despite the relatively higher values of RMSEP observed, the comparison of the percentage of relative errors in the predicted concentration highlights that, overall, the portable device delivers accuracy below 5%. Ultimately, it has been demonstrated that portable Raman spectroscopy enables accurate quantification of water in NADES directly through glass vials without the requirement for sample withdrawal. Such compact instruments provide solvent and consumable free analysis for rapid analysis directly in laboratories and for non-expert users. Portable Raman is a promising approach for high throughput monitoring of water content in NADES that can support the development of new analytical protocols in the field of green chemistry in research and development laboratories but also in the industry as a routine quality control tool.

Phenotypic and genetic variation of ultraviolet-visible-infrared spectral wavelengths of bovine meat

Spectroscopic predictions can be used for the genetic improvement of meat quality traits in cattle. No information is however available on the genetics of meat absorbance spectra. This research investigated the phenotypic variation and the heritability of meat absorbance spectra at individual wavelengths in the ultraviolet-visible and near-infrared region (UV-Vis-NIR) obtained with portable spectrometers. Five spectra per instrument were taken on the ribeye surface of 1185 Piemontese young bulls from 93 farms (13,182 Herd-Book pedigree relatives). Linear animal model analyses of 1481 single-wavelengths from UV-Vis-NIRS and 125 from Micro-NIRS were carried out separately. In the overlapping regions, the proportions of phenotypic variance explained by batch/date of slaughter (14 ± 6% and 17 ± 7%,), rearing farm (6 ± 2% and 5 ± 3%), and the residual variances (72 ± 10% and 72 ± 5%) were similar for the UV-Vis-NIRS and Micro-NIRS, but additive genetics (7 ± 2% and 4 ± 2%) and heritability (8.3 ± 2.3% vs 5.1 ± 0.6%) were greater with the Micro-NIRS. Heritability was much greater for the visible fraction (25.2 ± 11.4%), especially the violet, blue and green colors, than for the NIR fraction (5.0 ± 8.0%). These results allow a better understanding of the possibility of using the absorbance of visible and infrared wavelengths correlated with meat quality traits for the genetic improvement in beef cattle.

Evaluating low- mid- and high-level fusion strategies for combining Raman and infrared spectroscopy for quality assessment of red meat

The implementation of Raman and infrared spectroscopy with three data fusion strategies to predict pH and % IMF content of red meat was investigated. Raman and FTIR systems were utilized to assess quality parameters of intact red meat. Quantitative models were built using PLS, with model performances assessed with respect to the determination coefficient (R²), root mean square error and normalized root mean square error (NRMSEP). Results obtained on validation against an independent test set show that the high-level fusion strategy had the best performance in predicting the observed pH; with R_P² and NRMSEP values of 0.73 and 12.9% respectively, whereas low-level fusion strategy showed promise in predicting % IMF (NRMSEP = 8.5%). The fusion of data from more than one technique at low and high level resulted in improvement in the model performances; highlighting the possibility of information enhancement.

Detection of Meat Adulteration Using Spectroscopy-Based Sensors

Minced meat is a vulnerable to adulteration food commodity because species- and/or tissue-specific morphological characteristics cannot be easily identified. Hence, the economically motivated adulteration of minced meat is rather likely to be practiced. The objective of this work was to assess the potential of spectroscopy-based sensors in detecting fraudulent minced meat substitution, specifically of (i) beef with bovine offal and (ii) pork with chicken (and vice versa) both in fresh and frozen-thawed samples. For each case, meat pieces were minced and mixed so that different levels of adulteration with a 25% increment were achieved while two categories of pure meat also were considered. From each level of adulteration, six different samples were prepared. In total, 120 samples were subjected to visible (Vis) and fluorescence (Fluo) spectra and multispectral image (MSI) acquisition. Support Vector Machine classification models were developed and evaluated. The MSI-based models outperformed the ones based on the other sensors with accuracy scores varying from 87% to 100%. The Vis-based models followed in terms of accuracy with attained scores varying from 57% to 97% while the lowest performance was demonstrated by the Fluo-based models. Overall, spectroscopic data hold a considerable potential for the detection and quantification of minced meat adulteration, which, however, appears to be sensor-specific.

Performance of different portable and hand-held near-infrared spectrometers for predicting beef composition and quality characteristics in the abattoir without meat sampling

The availability of portable and handheld NIR instruments on the market opens up new possibilities in meat analysis. However, there is lack of research comparing different NIR instruments for evaluating beef characteristics from spectra obtained directly on the meat surface. Our aim, therefore, was to build and test calibration and prediction models for predicting beef characteristics, and to compare the performances of three NIR instruments differing in size and characteristics: a transportable visible-NIR spectrometer (Vis-NIRS), a portable (NIRS), and a hand-held Micro-NIRS. Spectra were collected from 178 beef samples (Longissimus thoracis muscle) from the meat surface in the abattoir. The spectra were subjected to different mathematical pretreatments then partial least square regressions. The results showed that all instruments predicted dry matter, protein and lipids with R²_VAL 0.23 to 0.70; pH and cooking loss R²_VAL 0.19 to 0.25; and color R²_VAL 0.35 to 0.77. Overall, the prediction performances of the three instruments were similar, although Micro-NIRS performed better in some respects.

Raman spectroscopy based characterization of cow, goat and buffalo fats

In this study, Raman spectroscopy has been utilized to characterize buffalo, cow and goat fat samples by using laser wavelengths at 532 and 785 nm as excitation sources. It has been observed that Raman spectra of cow fats contain beta-carotene at 1006, 1156 and 1520 cm^-1, which are absent in buffalo and goat fats. The Raman bands at 1060, 1080, 1127 and 1440 cm^-1 represent the saturated fatty acids, and their concentration is found relatively higher in buffalo fats than cow and goat. Similarly, the Raman band at 1650 cm^-1 represent conjugated linoleic acid (CLA) which shows its relatively higher concentration in goat fats than cow and buffalo. The Raman band at 1267 cm^-1 represent unsaturated fatty acids, which shows its relatively higher concentration in goat fats than cow and buffalo. The Raman bands at 838, 870 and 1060 cm^-1 depict relatively higher concentration of vitamin D in buffalo fats than cow and goat. Principal component analysis has been applied to highlight the differences among three fat types which based upon the concentration of fatty acids, CLA and vitamin D.

Portable Raman leaf-clip sensor for rapid detection of plant stress

Precision agriculture requires new technologies for rapid diagnosis of plant stresses, such as nutrient deficiency and drought, before the onset of visible symptoms and subsequent yield loss. Here, we demonstrate a portable Raman probe that clips around a leaf for rapid, in vivo spectral analysis of plant metabolites including carotenoids and nitrates. We use the leaf-clip Raman sensor for early diagnosis of nitrogen deficiency of the model plant Arabidopsis thaliana as well as two important vegetable crops, Pak Choi (Brassica rapa chinensis) and Choy Sum (Brassica rapa var. parachinensis). In vivo measurements using the portable leaf-clip Raman sensor under full-light growth conditions were consistent with those obtained with a benchtop Raman spectrometer measurements on leaf-sections under laboratory conditions. The portable leaf-clip Raman sensor offers farmers and plant scientists a new precision agriculture tool for early diagnosis and real-time monitoring of plant stresses in field conditions.

Prediction of water holding capacity and pH in porcine longissimus lumborum using Raman spectroscopy

The main purpose of this study was to investigate if Raman spectra recorded at the exact same position as drip loss measurements could improve prediction of drip loss in pork. One ventral and one dorsal cylindrical plug, cut from a standardized slice from Longissimus lumborum, were used to determine drip loss by EZ-DripLoss method and to collect Raman spectra, while ultimate pH was measured at another location. Partial least squares regression models were developed using spectra from each plug individually or averaged spectra from both plugs. The best models used spectra from the ventral plug, resulting in r_cv²=0.75, root mean square error of cross-validation (RMSECV) = 1.27% and ratio of prediction to deviation (RPD) =2.0 for EZ-DripLoss and r_cv²=0.72, RMSECV = 0.05 and RPD = 2.0 for ultimate pH. Results indicate that Raman spectroscopy can be used for rough screening of drip loss and pH in pork, and that the location chosen for collection of spectra can be very important for successful predictions.

Preliminary Assessment of Parmigiano Reggiano Authenticity by Handheld Raman Spectroscopy

Raman spectroscopy, and handheld spectrometers in particular, are gaining increasing attention in food quality control as a fast, portable, non-destructive technique. Furthermore, this technology also allows for measuring the intact sample through the packaging and, with respect to near infrared spectroscopy, it is not affected by the water content of the samples. In this work, we evaluate the potential of the methodology to model, by multivariate data analysis, the authenticity of Parmigiano Reggiano cheese, which is one of the most well-known and appreciated hard cheeses worldwide, with protected denomination of origin (PDO). On the other hand, it is also highly subject to counterfeiting. In particular, it is critical to assess the authenticity of grated cheese, to which, under strictly specified conditions, the PDO is extended. To this aim, it would be highly valuable to develop an authenticity model based on a fast, non-destructive technique. In this work, we present preliminary results obtained by a handheld Raman spectrometer and class-modeling (Soft Independent Modeling of Class Analogy, SIMCA), which are extremely promising, showing sensitivity and specificity of 100% for the test set. Moreover, another salient issue, namely the percentage of rind in grated cheese, was addressed by developing a multivariate calibration model based on Raman spectra. It was possible to obtain a prediction error around 5%, with 18% being the maximum content allowed by the production protocol.

Feasibility of on/at Line Methods to Determine Boar Taint and Boar Taint Compounds: An Overview

Simple Summary

Due to welfare issues, the physical castration of male pigs is decreasing, and the entire male pig production is increasing. Fattening entire male pigs requires control due to the possibility of accumulating off odour/flavour called boar taint, which is mainly due to two compounds - skatole and androstenone. If carcasses with boar taint reach the market, it can cause a negative consumer reaction which may have economic consequences for the whole meat chain. Thus, it is necessary to sort out carcasses at the slaughter line. Today, a sensory quality control (human nose method) is used in some slaughter plants for this purpose. Detection by physical or chemical methods is also envisaged. A colorimetric method to determine skatole has been used in Danish abattoirs for decades, but it is foreseen that it will soon be replaced by the laser diode thermal desorption ion source coupled with a mass spectrometry equipment that allows a fully automated classification based on skatole and androstenone levels at speed line, with a delay of less than 40 min. Other potential methods such as the electrochemical biosensors, rapid evaporative ionization mass spectroscopy and Raman spectroscopy, still need further development and validation for an application at abattoir level.

Abstract

Classification of carcasses at the slaughter line allows an optimisation of its processing and differentiated payment to producers. Boar taint is a quality characteristic that is evaluated in some slaughter plants. This odour and flavour is mostly present in entire males and perceived generally by sensitive consumers as unpleasant. In the present work, the methodologies currently used in slaughter plants for boar taint classification (colorimetric method and sensory quality control-human nose) and the methodologies that have the potential to be implemented on/at the slaughter line (mass spectrometry, Raman and biosensors) have been summarized. Their main characteristics are presented and an analysis of strengths, weaknesses, opportunities and threats (SWOT) has been carried out. From this, we can conclude that, apart from human nose, the technology that arises as very promising and available on the market, and that will probably become a substitute for the colorimetric method, is the tandem between the laser diode thermal desorption ion source and the mass spectrometry (LDTD-MS/MS) with automation of the sampling and sample pre-treatment, because it is able to work at the slaughter line, is fast and robust, and measures both androstenone and skatole.

Non-Destructive Imaging and Spectroscopic Techniques for Assessment of Carcass and Meat Quality in Sheep and Goats: A Review

In the last decade, there has been a significant development in rapid, non-destructive and non-invasive techniques to evaluate carcass composition and meat quality of meat species. This article aims to review the recent technological advances of non-destructive and non-invasive techniques to provide objective data to evaluate carcass composition and quality traits of sheep and goat meat. We highlight imaging and spectroscopy techniques and practical aspects, such as accuracy, reliability, cost, portability, speed and ease of use. For the imaging techniques, recent improvements in the use of dual-energy X-ray absorptiometry, computed tomography and magnetic resonance imaging to assess sheep and goat carcass and meat quality will be addressed. Optical technologies are gaining importance for monitoring and evaluating the quality and safety of carcasses and meat and, among them, those that deserve more attention are visible and infrared reflectance spectroscopy, hyperspectral imagery and Raman spectroscopy. In this work, advances in research involving these techniques in their application to sheep and goats are presented and discussed. In recent years, there has been substantial investment and research in fast, non-destructive and easy-to-use technology to raise the standards of quality and food safety in all stages of sheep and goat meat production.

Fraud in Animal Origin Food Products: Advances in Emerging Spectroscopic Detection Methods over the Past Five Years

Animal origin food products, including fish and seafood, meat and poultry, milk and dairy foods, and other related products play significant roles in human nutrition. However, fraud in this food sector frequently occurs, leading to negative economic impacts on consumers and potential risks to public health and the environment. Therefore, the development of analytical techniques that can rapidly detect fraud and verify the authenticity of such products is of paramount importance. Traditionally, a wide variety of targeted approaches, such as chemical, chromatographic, molecular, and protein-based techniques, among others, have been frequently used to identify animal species, production methods, provenance, and processing of food products. Although these conventional methods are accurate and reliable, they are destructive, time-consuming, and can only be employed at the laboratory scale. On the contrary, alternative methods based mainly on spectroscopy have emerged in recent years as invaluable tools to overcome most of the limitations associated with traditional measurements. The number of scientific studies reporting on various authenticity issues investigated by vibrational spectroscopy, nuclear magnetic resonance, and fluorescence spectroscopy has increased substantially over the past few years, indicating the tremendous potential of these techniques in the fight against food fraud. It is the aim of the present manuscript to review the state-of-the-art research advances since 2015 regarding the use of analytical methods applied to detect fraud in food products of animal origin, with particular attention paid to spectroscopic measurements coupled with chemometric analysis. The opportunities and challenges surrounding the use of spectroscopic techniques and possible future directions will also be discussed.

Analysis of subcutaneous swine fat via deep Raman spectroscopy using a fiber-optic probe

Since the fat content of pork is a deciding factor in meat quality grading, the use of a noninvasive subcutaneous probe for real-time in situ monitoring of the fat components is of importance to vendors and other interested parties. In this work, we developed a spectroscopic method using a fiber-optic probe for subcutaneous fat analysis that utilizes spatially offset Raman spectroscopy (SORS). Here, normalized Raman spectra were acquired as a function of spatial offset, and the relative composition of fat-to-skin was determined. We found that the Raman intensity ratio varied disproportionately depending on the fat content and that the variations of the slope were correlated to the thickness of the fat layer. Furthermore, ordinary least square (OLS) regression using two components indicated that the depth-resolved SORS spectra reflected the relative thickness of the fat layer. We concluded that the local distribution of subcutaneous fat could be measured noninvasively using a pair of fiber-optic probes.