Heavy Metal Pollutions: State of the Art and Innovation in Phytoremediation

Role of Root Exudates on the Soil Microbial Diversity and Biogeochemistry of Heavy Metals

Due to extensive industrialization and escalation in pollution, the world is facing problems related to soil heavy metal pollution. The traditional ways of soil remediation are neither feasible nor cost-effective in most of the real-world scenarios, where metal concentration is relatively low in soil. Therefore, phytoremediation using plants and plant secretions to remediate heavy metal-contaminated soil is recently getting more attention. The plant root exudates act as an ecological driver in the rhizospheric region where they influence and guide the microbial community to function in such a way that can be advantageous for plant growth. They also promote phytoremediation process by altering the bioavailability of pollutants in soil. Root exudates affect the biogeochemical properties of heavy metals as well. In this review, existing literature on the role of root exudates (natural as well as artificial) on the phytoremediation of heavy metal-contaminated (particularly lead) soil is reviewed. The effect of root exudates on the biogeochemistry of lead in soil is also discussed.

Plant Growth-Promoting Rhizobacteria (PGPR) Assisted Bioremediation of Heavy Metal Toxicity

Due to a variety of natural and anthropogenic processes, heavy metal toxicity of soil constitutes a substantial hazard to all living beings in the environment. The heavy metals alter the soil properties, which directly or indirectly influence the agriculture systems. Thus, plant growth-promoting rhizobacteria (PGPR)-assisted bioremediation is a promising, eco-friendly, and sustainable method for eradicating heavy metals. PGPR cleans up the heavy metal-contaminated environment using various approaches including efflux systems, siderophores and chelation, biotransformation, biosorption, bioaccumulation, precipitation, ACC deaminase activity, biodegradation, and biomineralization methods. These PGPRs have been found effective to bioremediate the heavy metal-contaminated soil through increased plant tolerance to metal stress, improved nutrient availability in soil, alteration of heavy metal pathways, and by producing some chemical compounds like siderophores and chelating ions. Many heavy metals are non-degradable; hence, another remediation approach with a broader scope of contamination removal is needed. This article also briefly emphasized the role of genetically modified PGPR strains which improve the soil's degradation rate of heavy metals. In this regard, genetic engineering, a molecular approach, could improve bioremediation efficiency and be helpful. Thus, the ability of PGPRs can aid in heavy metal bioremediation and promote a sustainable agricultural soil system.

Engaging One Health in Heavy Metal Pollution in Some Selected Nigerian Niger Delta Cities. A Systematic Review of Pervasiveness, Bioaccumulation and Subduing Environmental Health Challenges

The Niger Delta environment is under serious threat due to heavy metal pollution. Many studies have been conducted on the heavy metal contamination in soils, water, seafood and plants in the Niger Delta ecosystem. However, there is a lack of clear understanding of the health consequences for people and strategies for attaining One Health, and a dispersion of information that is accessible. The study focused on investigating the contamination levels, distributions, risks, sources and impacts of heavy metals in selected regions of the Niger Delta. Prior studies revealed that the levels of certain heavy metals, including Cd, Pb, Cu, Cr, Mn, Fe and Ni, in water, sediment, fish and plants in most Niger Delta ecosystems were higher than the acceptable threshold attributed to various anthropogenic stressors. In the reviewed Niger Delta states, ecosystems in Rivers state showed the highest concentrations of heavy metals in most sampled sites. Groundwater quality was recorded at concentrations higher than 0.3 mg/L World Health Organization drinking water guideline. High concentrations of copper (147.915 mg/L) and zinc (10.878 mg/L) were found in Rivers State. The heavy metals concentrations were greater in bottom-dwelling organisms such as bivalves, gastropods and shrimp than in other fishery species. Heavy metal exposure in the region poses risks of communicable and non-communicable diseases. Diverse remediation methods are crucial to reduce contamination levels, but comprehensive strategies and international cooperation are essential to address the health hazards. Actively reducing heavy metals in the environment can achieve One Health objectives and mitigate disease and economic burdens.

The synergistic potential of biochar and nanoparticles in phytoremediation and enhancing cadmium tolerance in plants

Cadmium (Cd) is classified as a heavy metal (HM) and is found into the environment through both natural processes and intensified anthropogenic activities such as industrial operations, mining, disposal of metal-laden waste like batteries, as well as sludge disposal, excessive fertilizer application, and Cd-related product usage. This rising Cd disposal into the environment carries substantial risks to the food chain and human well-being. Inadequate regulatory measures have led to Cd bio-accumulation in plants, which is increasing in an alarming rate and further jeopardizing higher trophic organisms, including humans. In response, an effective Cd decontamination strategy such as phytoremediation emerges as a potent solution, with innovations in nanotechnology like biochar (BC) and nanoparticles (NPs) further augmenting its effectiveness for Cd phytoremediation. BC, derived from biomass pyrolysis, and a variety of NPs, both natural and less toxic, actively engage in Cd removal during phytoremediation, mitigating plant toxicity and associated hazards. This review scrutinizes the application of BC and NPs in Cd phytoremediation, assessing their synergistic mechanism in influencing plant growth, genetic regulations, structural transformations, and phytohormone dynamics. Additionally, the review also underscores the adoption of this sustainable and environmentally friendly strategies for future research in employing BC-NP microaggregates to ameliorate Cd phytoremediation from soil, thereby curbing ecological damage due to Cd toxicity.

Toxicity and bioremediation of the lead: a critical review

Lead is a naturally occurring, bluish-gray metal that is found in small quantities in the earth's crust. The existing literature demonstrates that non-biodegradable character and continuous use results in accumulation of lead concentration in the environment and causes various ill effects such as neurotoxicity, change in psychological and behavioral development of different organisms. Nowadays the most effective technique in the revival of the environment is bioremediation and it is environmentally friendly and cost-effective. Bacterial strains such as Oceanobacillus profundus and Lactobacillus acidophilus ATCC4356 have the ability to reduce lead 97% and 73.9%, respectively. Similarly some species of algae and fungal strains also showed lead removal efficiency as 74% (spirulina), 97.1% (Chlorella kessleri), 95.5% (Penicillium janthinillum) and 86% (Aspergillus flavus). Biodegradation of lead by various microbes would be the most efficient and sustainable approach. This review focuses on toxicity, fate of lead in the environment and its microbial degradation.

Divergent roles of IREG/Ferroportin transporters from the nickel hyperaccumulator Leucocroton havanensis

In response to our ever-increasing demand for metals, phytotechnologies are being developed to limit the environmental impact of conventional metal mining. However, the development of these technologies, which rely on plant species able to tolerate and accumulate metals, is partly limited by our lack of knowledge of the underlying molecular mechanisms. In this work, we aimed to better understand the role of metal transporters of the IRON REGULATED 1/FERROPORTIN (IREG/FPN) family from the nickel hyperaccumulator Leucocroton havanensis from the Euphorbiaceae family. Using transcriptomic data, we identified two homologous genes, LhavIREG1 and LhavIREG2, encoding divalent metal transporters of the IREG/FPN family. Both genes are expressed at similar levels in shoots, but LhavIREG1 shows higher expression in roots. The heterologous expression of these transporters in A. thaliana revealed that LhavIREG1 is localized to the plasma membrane, whereas LhavIREG2 is located on the vacuole. In addition, the expression of each gene induced a significant increase in nickel tolerance. Taken together, our data suggest that LhavIREG2 is involved in nickel sequestration in vacuoles of leaf cells, whereas LhavIREG1 is mainly involved in nickel translocation from roots to shoots, but could also be involved in metal sequestration in cell walls. Our results suggest that paralogous IREG/FPN transporters may play complementary roles in nickel hyperaccumulation in plants.

Integrating phytoremediation and mycoremediation with biosurfactant-producing fungi for hydrocarbon removal and the potential production of secondary resources

Treatment of petroleum-contaminated soil to a less toxic medium via physical and chemical treatment is too costly and requires posttreatment. This review focuses on the employment of phytoremediation and mycoremediation technologies in cleaning hydrocarbon-contaminated soil which is currently rare. It is considered environmentally beneficial and possibly cost-effective as it implements the synergistic interaction between plants and biosurfactant producing mycorrhiza to degrade hydrocarbon contaminants. This review also covers possible sources of hydrocarbon pollution in water and soil, toxicity effects, and current technologies for hydrocarbon removal and degradation. In addition to these problems, this review also discusses the challenges and opportunities of transforming the resultant treated sludge and treating plants into potential by-products for a higher quality of life for future generations.

Mechanistic understanding on the uptake of micro-nano plastics by plants and its phytoremediation

Contaminated soil is one of today's most difficult environmental issues, posing serious hazards to human health and the environment. Contaminants, particularly micro-nano plastics, have become more prevalent around the world, eventually ending up in the soil. Numerous studies have been conducted to investigate the interactions of micro-nano plastics in plants and agroecosystems. However, viable remediation of micro-nano plastics in soil remains limited. In this review, a powerful in situ soil remediation technology known as phytoremediation is emphasized for addressing micro-nano-plastic contamination in soil and plants. It is based on the synergistic effects of plants and the microorganisms that live in their rhizosphere. As a result, the purpose of this review is to investigate the mechanism of micro-nano plastic (MNP) uptake by plants as well as the limitations of existing MNP removal methods. Different phytoremediation options for removing micro-nano plastics from soil are also described. Phytoremediation improvements (endophytic-bacteria, hyperaccumulator species, omics investigations, and CRISPR-Cas9) have been proposed to enhance MNP degradation in agroecosystems. Finally, the limitations and future prospects of phytoremediation strategies have been highlighted in order to provide a better understanding for effective MNP decontamination from soil.

Research progress of the detection and analysis methods of heavy metals in plants

Heavy metal (HM)-induced stress can lead to the enrichment of HMs in plants thereby threatening people's lives and health via the food chain. For this reason, there is an urgent need for some reliable and practical techniques to detect and analyze the absorption, distribution, accumulation, chemical form, and transport of HMs in plants for reducing or regulating HM content. Not only does it help to explore the mechanism of plant HM response, but it also holds significant importance for cultivating plants with low levels of HMs. Even though this field has garnered significant attention recently, only minority researchers have systematically summarized the different methods of analysis. This paper outlines the detection and analysis techniques applied in recent years for determining HM concentration in plants, such as inductively coupled plasma mass spectrometry (ICP-MS), atomic absorption spectrometry (AAS), atomic fluorescence spectrometry (AFS), X-ray absorption spectroscopy (XAS), X-ray fluorescence spectrometry (XRF), laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS), non-invasive micro-test technology (NMT) and omics and molecular biology approaches. They can detect the chemical forms, spatial distribution, uptake and transport of HMs in plants. For this paper, the principles behind these techniques are clarified, their advantages and disadvantages are highlighted, their applications are explored, and guidance for selecting the appropriate methods to study HMs in plants is provided for later research. It is also expected to promote the innovation and development of HM-detection technologies and offer ideas for future research concerning HM accumulation in plants.

Biogenic Punica granatum Flower Extract Assisted ZnFe2O4 and ZnFe2O4-Cu Composites for Excellent Photocatalytic Degradation of RhB Dye

Globally, the textile industry contributes to pollution through accidental discharges or discharge of contaminated wastewater into waterways, significantly affecting water quality. These pollutants, including dye molecules, are environmental hazards for aquatic and terrestrial life. The field of visible light-mediated photocatalysis has experienced rapid growth, driven by the utilization of photocatalysts that can absorb low-energy visible light and effectively degrade dyes. In the present study, we report a simple method to controllably synthesize Fe2O3, ZnO, and ZnFe2O4 using the one-pot synthesis method. In the subsequent step, copper (Cu) was deposited on the surface of ZnFe2O4 (forming ZnFe2O4-Cu) using a facile, green, and cost-effective method. The synthesized samples were characterized using various techniques, including XRD, UV-Vis DRS, FT-IR, SEM-EDX, HR-TEM, XPS, PL, and BET analysis. These techniques were employed to investigate the composition, morphology, structure, and photophysical properties of as-prepared samples. The ZnFe2O4-Cu nanocomposite demonstrated efficient photocatalytic activity for degrading RhB dye pollutants under visible light. The photocatalyst was successfully reused for three consecutive cycles without significantly decreasing performance. Furthermore, during the study, the radical scavenging test emphasized the role of different radicals in the degradation of dye pollutants. This research has the potential to enable the efficient production of high-performance photocatalysts that can rapidly eliminate ecologically harmful dyes from aqueous solutions.

Effect of freeze-thaw manipulation on phytostabilization of industrially contaminated soil with halloysite nanotubes

The latest trends in improving the performance properties of soils contaminated with potentially toxic elements (PTEs) relate to the possibility of using raw additives, including halloysite nanotubes (HNTs) due to eco-friendliness, and inexpensiveness. Lolium perenne L. was cultivated for 52 days in a greenhouse and then moved to a freezing-thawing chamber for 64 days. HNT addition into PTE-contaminated soil cultivated with grass under freezing-thawing conditions (FTC) was tested to demonstrate PTE immobilization during phytostabilization. The relative yields increased by 47% in HNT-enriched soil in a greenhouse, while under FTC decreased by 17% compared to the adequate greenhouse series. The higher PTE accumulation in roots in HNT presence was evident both in greenhouse and chamber conditions. (Cr/Cd and Cu)-relative contents were reduced in soil HNT-enriched-not-FTC-exposed, while (Cr and Cu) in HNT-enriched-FTC-exposed. PTE-immobilization was discernible by (Cd/Cr/Pb and Zn)-redistribution into the reducible fraction and (Cu/Ni and Zn) into the residual fraction in soil HNT-enriched-not-FTC-exposed. FTC and HNT facilitated transformation to the residual fraction mainly for Pb. Based on PTE-distribution patterns and redistribution indexes, HNT's role in increasing PTE stability in soils not-FTC-exposed is more pronounced than in FTC-exposed compared to the adequate series. Sphingomonas, Acidobacterium, and Mycobacterium appeared in all soils. HNTs mitigated FTC's negative effect on microbial diversity and increased Planctomycetia abundance.

Plant growth-promoting rhizobacteria: a potential bio-asset for restoration of degraded soil and crop productivity with sustainable emerging techniques

The rapid expansion of degraded soil puts pressure on agricultural crop yield while also increasing the likelihood of food scarcity in the near future at the global level. The degraded soil does not suit plants growth owing to the alteration in biogeochemical cycles of nutrients, soil microbial diversity, soil organic matter, and increasing concentration of heavy metals and organic chemicals. Therefore, it is imperative that a solution should be found for such emerging issues in order to establish a sustainable future. In this context, the importance of plant growth-promoting rhizobacteria (PGPR) for their ability to reduce plant stress has been recognized. A direct and indirect mechanism in plant growth promotion is facilitated by PGPR via phytostimulation, biofertilizers, and biocontrol activities. However, plant stress mediated by deteriorated soil at the field level is not entirely addressed by the implementation of PGPR at the field level. Thus, emerging methods such as CRISPR and nanotechnological approaches along with PGPR could manage degraded soil effectively. In the pursuit of the critical gaps in this respect, the present review discusses the recent advancement in PGPR action when used along with nanomaterials and CRISPR, impacting plant growth under degraded soil, thereby opening a new horizon for researchers in this field to mitigate the challenges of degraded soil.

Mitigation of heavy metal stress in the soil through optimized interaction between plants and microbes

Agricultural as well as industrial processes, such as mining and textile activities, are just a few examples of anthropogenic activities that have a long-term negative impact on the environment. Each of the aforementioned factors increases the concentration of heavy metals in soil. Heavy metal contamination in soil causes a wide range of environmental issues and is harmful to microbes, plants, and animals. Because of their non-biodegradability and toxic effects, preventing additional metal contamination and remediating the vast majority of contaminated sites around the world is critical. Hence, this review focuses on the effects of metal contamination on soil microbes, as well as plant-microbe interactions. Plant-associated probiotics reduce metal accumulation; the introduction of beneficial microbes is regarded as one of the most promising approaches to improving metal stress tolerance; thus, the study focuses on plant-microbe interactions as well as their actual implications via phytoremediation. Plant-microbe interaction can play an important role in acclimating vegetation (plants) to metalliferous conditions and should thus be studied to improve microbe-aided metal tolerance in plants. Plant-interacted microbes reduce metal accumulation in plant cells and metal bioaccumulation in the soil through a variety of processes. A novel phytobacterial approach, such as genetically modified microbes, is now being used to improve heavy metal cleanup as well as stress tolerance among plants. This review examines our current understanding of such negative consequences of heavy metal stresses, signaling responses, and the role of plant-associated microbiota in heavy metal stress tolerance and interaction.

Foliar architecture differentially restrains metal sequestration capacity in wheat grains (Triticum aestivum L.) grown in hyper-chloride-contaminated soils

Anthropogenic activities, such as industrial wastewater and use of water softeners, cause hyper-accumulation of Cl- in water sources and soils. Currently, industries have no sustainable method to remove these Cl- ions from wastewater. This study was conducted to evaluate the integrative responses of wheat cultivated in five industrial effluent-affected areas (S2-S6) by investigating soil characters and bioaccumulation of metals in wheat plants and grains. The S4 site (near the second chloride outlet) exhibited a higher concentration of CO2, SO2, NO2, Cl-, Cd, Mn, Ni, Cr, and Zn. Soil from S6 (sewage wastewater downstream getting mixed with chloride-contaminated water) had a minimum level of nutrients (Na, K, and Ca), maximum metals (Cd, Fe, Pb, Mn), and reduction in plant biomass. In site S2 (sewage wastewater upstream of the chloride factory), a higher level of minerals and metals was noted in the roots. Maximum metals in grains occurred in S6 with higher organic osmolytes. The sequestration capacity of metals in leaves was also increased by alterations in anatomical traits. Results indicated that metals and hyper-Cl- concentration employed a negative influence on the plants because of poor soil quality, extremely damaged microstructures leading to reduced yield, poor grain quality, and excessive translocation from roots to wheat grains. These findings revealed that contaminated plants used as either green forage or hay are noxious to animals and if used as grain for feed or humans can lead to serious health hazards.

Overexpression of ApHIPP26 from the Hyperaccumulator Arabis paniculata Confers Enhanced Cadmium Tolerance and Accumulation to Arabidopsis thaliana

Cadmium (Cd) is a toxic heavy metal that seriously affects metabolism after accumulation in plants, and it also causes adverse effects on humans through the food chain. The HIPP gene family has been shown to be highly tolerant to Cd stress due to its special domain and molecular structure. This study described the Cd-induced gene ApHIPP26 from the hyperaccumulator Arabis paniculata. Its subcellular localization showed that ApHIPP26 was located in the nucleus. Transgenic Arabidopsis overexpressing ApHIPP26 exhibited a significant increase in main root length and fresh weight under Cd stress. Compared with wild-type lines, Cd accumulated much more in transgenic Arabidopsis both aboveground and underground. Under Cd stress, the expression of genes related to the absorption and transport of heavy metals underwent different changes in parallel, which were involved in the accumulation and distribution of Cd in plants, such as AtNRAMP6 and AtNRAMP3. Under Cd stress, the activities of antioxidant enzymes (superoxide dismutase, peroxidase, catalase, and ascorbate peroxidase) in the transgenic lines were higher than those in the wild type. The physiological and biochemical indices showed that the proline and chlorophyll contents in the transgenic lines increased significantly after Cd treatment, while the malondialdehyde (MDA) content decreased. In addition, the gene expression profile analysis showed that ApHIPP26 improved the tolerance of Arabidopsis to Cd by regulating the changes of related genes in plant hormone signal transduction pathway. In conclusion, ApHIPP26 plays an important role in cadmium tolerance by alleviating oxidative stress and regulating plant hormones, which provides a basis for understanding the molecular mechanism of cadmium tolerance in plants and provides new insights for phytoremediation in Cd-contaminated areas.

Amendment of soils with metal-rich sludge: Potential water toxicity due to metal release via over-time slaking

Industrial metal-rich sludge can improve soil properties, but it is potentially toxic to soils and adjacent aquatic systems. The soil-sludge-water interactions influence metals bioavailability over time, a phenomenon mostly regulated by the still debatable "sludge physical protection" or "sludge delayed release" hypotheses. The present study aimed to investigate: (1) whether sludge increases soil aggregate stability against slaking, (2) which hypothesis mostly regulates metal release from soils to water and (3) the ecotoxicity of the metals released during soil slaking for aquatic organisms. Under a realistic field scale, soils amended with an industrial sludge or spiked with equivalent metal solutions (of Cr, Cu, Ni, Zn) were collected over three months to test soil aggregate stability, the ecotoxicity of the slaking water and metal contents in soil and water. The "sludge physical protection" was verified for all metals, though for Cu the "sludge delayed release" hypothesis appears plausible after three months. Soil amendment with sludge did not lead to effects on the growth of the microalga Raphidocelis subcapitata, contrarily to the observed for the metal-spiked soil. Criteria regulating soils sludge-amendment management should thus include doses not hazardous to biota, and not only metal threshold levels.

Current Scenario and Future Prospects of Endophytic Microbes: Promising Candidates for Abiotic and Biotic Stress Management for Agricultural and Environmental Sustainability

Globally, substantial research into endophytic microbes is being conducted to increase agricultural and environmental sustainability. Endophytic microbes such as bacteria, actinomycetes, and fungi inhabit ubiquitously within the tissues of all plant species without causing any harm or disease. Endophytes form symbiotic relationships with diverse plant species and can regulate numerous host functions, including resistance to abiotic and biotic stresses, growth and development, and stimulating immune systems. Moreover, plant endophytes play a dominant role in nutrient cycling, biodegradation, and bioremediation, and are widely used in many industries. Endophytes have a stronger predisposition for enhancing mineral and metal solubility by cells through the secretion of organic acids with low molecular weight and metal-specific ligands (such as siderophores) that alter soil pH and boost binding activity. Finally, endophytes synthesize various bioactive compounds with high competence that are promising candidates for new drugs, antibiotics, and medicines. Bioprospecting of endophytic novel secondary metabolites has given momentum to sustainable agriculture for combating environmental stresses. Biotechnological interventions with the aid of endophytes played a pivotal role in crop improvement to mitigate biotic and abiotic stress conditions like drought, salinity, xenobiotic compounds, and heavy metals. Identification of putative genes from endophytes conferring resistance and tolerance to crop diseases, apart from those involved in the accumulation and degradation of contaminants, could open new avenues in agricultural research and development. Furthermore, a detailed molecular and biochemical understanding of endophyte entry and colonization strategy in the host would better help in manipulating crop productivity under changing climatic conditions. Therefore, the present review highlights current research trends based on the SCOPUS database, potential biotechnological interventions of endophytic microorganisms in combating environmental stresses influencing crop productivity, future opportunities of endophytes in improving plant stress tolerance, and their contribution to sustainable remediation of hazardous environmental contaminants.

PGPR-driven phytoremediation and physiobiochemical response of Miscanthus × giganteus to stress induced by the trace elements

The effect of inoculation of Miscanthus × giganteus Greef et Deu by the plant growth promoting rhizobacteria (PGPRs) to the phytoremediation process and physio-biochemical plant's parameters was investigated in soil contaminated with the trace elements (TEs) from the Tekeli mining complex, Kazakhstan. Yeast Trichosporon sp. CA1, strains Rhizobium sp. Zn1-1, Shinella sp. Zn5-6, and Pseudomonas sp. CHA1-4, resistant to Zn and Pb, were isolated from the rhizosphere of M × g when the plant was cultivated in the same contaminated soil. Results illustrated that inoculation improved M × g adaptability to TEs toxicity by increasing the tolerance index to 2.9. The treatment enhanced the aboveground biomass yield by up to 163%, root biomass by up to 240%, chlorophyll content by up to 30%, and Chla/b ratio by up to 21%. Through M × g active growth and development, the peak activity of antioxidant enzymes was observed: activity of superoxide dismutase and glutathione reductase was induced, while the activity of catalase and ascorbate peroxidase was inhibited. Based on bioconcentration and translocation factors it was revealed that PGPRs selectively increased the uptake of TEs or stabilised them in the M × g rhizosphere. Inoculation with PGPRs increased the stabilization of Pb, V, Cr, Co, Ni, Cu, Cd, As, and Ba in the soil and plant tissues. Further research should focus on ex situ experiments using isolated PGPRs.

Relationship between different physiological processes of Tomato seedlings exposed to acid mine water Uncovered using correlation analysis

This study was conducted to assess the correlation between growth response, phytoaccumulation factor of different tissues, and elemental composition in tomato seedlings exposed to acid mine water (AMW). In pairwise correlation determinations values of plant height, stem diameter, seed germination indices (radicle length, final germination percentage (FGP), emergency rate index (ERI), vigour index (VI), germination percentage (G%) and germination rate index (GRI)) and the elemental compositions (Cd, Cr, Cu, Ni and Zn) in the different plant tissues, root (root accumulation factor = RAF), stem (stem translocation factor = STF) and leaves (leaf translocation factor = LTF) were selected for the relationship determinations. Pearson correlation coefficients were calculated and revealed the relationships between the paired parameters. The study concluded that the strongly correlated physiological parameters were jointly co-ordinated in tomato seedlings exposed to AMW.

Omics approaches in effective selection and generation of potential plants for phytoremediation of heavy metal from contaminated resources

Soil and water pollution, rapid industrialization, contaminated irrigation-water, increased waste-production and surge in agricultural land leads to the accumulation of Heavy Metals (HM) with time. HM contamination has raised concern over the past years and new remediation strategies are required to deal with it. HM-contaminated soil is often used for the production of food, which makes a gateway for toxic metals into the food-chain, thereby affecting food security and human health. To avoid HM-toxicity, decontamination of important resources is essential. Therefore, exploring phytoremediation for the removal, decomposition and detoxification of hazardous metals from HM-contaminated sites is of great significance. Hyper-accumulator plants can efficiently remove HMs. However, despite many hyper-accumulator plant species, there is a research gap in the studies of phytotechnology. Hence biotechnological efforts advocating omics studies i.e. genomics, transcriptomics, proteomics, metabolomics and phenomics are in order, the purpose being to select and enhance a plant's potential for the process of phytoremediation to be more effective. There is a need to study newly developed high-efficiency hyper-accumulator plants as HM-decontaminator candidates for phytoremediation and phytomining. Therefore, this review focuses on various strategies and bio-technological methods for the removal of HM contaminants from sites, with emphasis on the advancement of phytoremediation, along with applications in cleaning up various toxic pollutants.

Bacterial Communities Associated with the Roots of Typha spp. and Its Relationship in Phytoremediation Processes

Heavy metal pollution is a severe concern worldwide, owing to its harmful effects on ecosystems. Phytoremediation has been applied to remove heavy metals from water, soils, and sediments by using plants and associated microorganisms to restore contaminated sites. The Typha genus is one of the most important genera used in phytoremediation strategies because of its rapid growth rate, high biomass production, and the accumulation of heavy metals in its roots. Plant growth-promoting rhizobacteria have attracted much attention because they exert biochemical activities that improve plant growth, tolerance, and the accumulation of heavy metals in plant tissues. Because of their beneficial effects on plants, some studies have identified bacterial communities associated with the roots of Typha species growing in the presence of heavy metals. This review describes in detail the phytoremediation process and highlights the application of Typha species. Then, it describes bacterial communities associated with roots of Typha growing in natural ecosystems and wetlands contaminated with heavy metals. Data indicated that bacteria from the phylum Proteobacteria are the primary colonizers of the rhizosphere and root-endosphere of Typha species growing in contaminated and non-contaminated environments. Proteobacteria include bacteria that can grow in different environments due to their ability to use various carbon sources. Some bacterial species exert biochemical activities that contribute to plant growth and tolerance to heavy metals and enhance phytoremediation.

Removal of heavy metals using Iris species: A potential approach for reclamation of heavy metal-polluted sites and environmental beautification

Globally, the number of heavy metal (HM)-polluted sites has increased rapidly in recent years, posing a serious threat to agricultural productivity, human health, and environmental safety. Hence, it is necessary to remediate HM-polluted sites to increase cultivatable lands for agricultural productivity, prevent hazardous effects to human health, and promote environmental safety. Removal of HMs using plants (phytoremediation) is a promising method as it is eco-friendly. Recently, ornamental plants have been widely used in phytoremediation programs as they can simultaneously eliminate HMs and are aesthetically pleasing. Among the ornamental plants, Iris species are frequently used; however, their role in HM remediation has not been reviewed yet. Here, the importance of Iris species in the ornamental industry and their different commercial aspects are briefly described. Additionally, the mechanisms of how the plant species absorb and transport the HMs to the above-ground tissues and tolerate HM stress are highlighted. The variation in HM remediation efficiency depending on the plant species, HM type and concentration, use of certain supplements, and experimental conditions are also discussed. Iris species are able to remove other hazards as well, such as pesticides, pharmaceutical compounds, and industrial wastes, from polluted soils or waste-water. Owing to the valuable information presented in this review, we expect more applications of the species in reclaiming polluted sites and beautifying the environment.

A mini-review on arsenic remediation techniques from water and future trends

Arsenic contamination is a severe issue because of its toxicity and related health risks. This review article presents an overview of the sources, health hazards, and treatment options for arsenic pollution. Conventional approaches to achieving the permitted level of 10 ppb set by the WHO, such as chemical oxidation, biological oxidation, and coagulation-flocculation, are ineffective and time-consuming. The paper analyses the advantages and disadvantages of various advanced treatment technologies, including membrane filtration, ion exchange, advanced oxidation, phytoremediation, and adsorption. This paper summarized the effectiveness of hybrid arsenic remediation techniques in removing arsenic and its operating conditions. This study is a helpful tool for putting remediation strategies into practice. This article describes arsenic pollution's damaging effects on human health, underscoring the necessity for careful treatment. The article addresses numerous treatment technologies, each with advantages and disadvantages preventing widespread use. Due to these limitations, deciding the best technique for arsenic remediation is difficult. As a result, hybrid treatment systems are urgently needed, with photocatalysis-adsorption being the most popular approach. The relevance of adaptable, user-friendly, low-maintenance hybrid technologies that are versatile, easy to use, and provide affordable arsenic removal options, especially for poor populations, is highlighted by prospects.

Phytoremediation proficiency of Jatropha gossypifolia under the influence of Pseudomonas aeruginosa on metal contaminated soil

This investigation was performed to evaluate the metal pollution and possible phytoremediation on bauxite mine surrounding farmland soil. The quality analysis results revealed that, the soil has been polluted with metals such as Al (13.25 ± 0.54 mg kg^-1), Pb (336.18 ± 7.17 mg kg^-1), Zn (382.18 ± 3.05 mg kg^-1), and Cd (11.32 ± 0.28 mg kg^-1) and possess poor essential element content. The test bacterium Pseudomonas aeroginosa showed considerable metal tolerance up to 100 mg kg^-1 concentration of metals such as Al, Pb, Zn, and Cd. Besides that, it also possesses essential plant growth promoting traits such as sederophore, IAA, nitrogen fixation, and phosphate solubilization. The test bacterium P. aeroginosa demonstrated optimistic influence on the growth and phytoremediation ability of Jatropha gossypifolia on metal-polluted soil under greenhouse experiment with different treatment groups (I-V). Group I (J. gossypifolia seeds coated with P. aeroginosa) showed outstanding phytoremediation potential on metal polluted soil than other treatment groups. The group I reduced considerable quantity of metals (Al 42.79%, Pb 36.57%, Zn 47.06%, and Cd 39.57%) from the treated soil. It was significantly higher than the remediation potential of other treatment groups (II-V). These findings suggest that P. aeroginosa's metal tolerant and PGP characters can effectively influence the growth and phytoremediation potential of J. gossypifolia on metal polluted soil.

Phytoremediation of Wastewater Containing Lead and Manganese Ions Using Algae

Heavy metal pollution of water from industrial discharge is a major problem worldwide. Thus, the quality of the environment and human health are severely affected. Various conventional technologies have been applied for water treatment, but these can be expensive, especially for industrial water treatment, and may have limited treatment efficiencies. Phytoremediation is a method that is successfully applied to remove metal ions from wastewater. In addition to the high efficiency of the depollution treatment, this method has the advantages of a low cost of the operation and the existence of many plants that can be used. This article presents the results of using algae (Sargassum fusiforme and Enteromorpha prolifera) to treat water containing manganese and lead ions. It was observed that maximum efficiencies for wastewater treatment were obtained when was used the algae Enteromorpha prolifera for a 600 min contact time period. The highest wastewater treatment efficiency obtained using Sargassum fusiforme was 99.46%.

Genome-wide identification and expression profile analysis of metal tolerance protein gene family in Eucalyptus grandis under metal stresses

Metal tolerance proteins (MTPs) as Me²⁺/H⁺(K⁺) antiporters participate in the transport of divalent cations, leading to heavy metal stress resistance and mineral utilization in plants. In the present study, to obtain better knowledge of the biological functions of the MTPs family, 20 potential EgMTPs genes were identified in Eucalyptus grandis and classified into seven groups belonging to three cation diffusion facilitator groups (Mn-CDFs, Zn/Fe-CDFs, and Zn-CDFs) and seven groups. EgMTP-encoded amino acids ranged from 315 to 884, and most of them contained 4-6 recognized transmembrane domains and were clearly prognosticated to localize into the cell vacuole. Almost all EgMTP genes experienced gene duplication events, in which some might be uniformly distributed in the genome. The numbers of cation efflux and the zinc transporter dimerization domain were highest in EgMTP proteins. The promoter regions of EgMTP genes have different cis-regulatory elements, indicating that the transcription rate of EgMTP genes can be a controlled response to different stimuli in multiple pathways. Our findings provide accurate perception on the role of the predicted miRNAs and the presence of SSR marker in the Eucalyptus genome and clarify their functions in metal tolerance regulation and marker-assisted selection, respectively. Gene expression profiling based on previous RNA-seq data indicates a probable function for EgMTP genes during development and responses to biotic stress. Additionally, the upregulation of EgMTP6, EgMTP5, and EgMTP11.1 to excess Cd²⁺ and Cu²⁺ exposure might be responsible for metal translocation from roots to leaves.

The root-associated Fusarium isolated based on fungal community analysis improves phytoremediation efficiency of Ricinus communis L. in multi metal-contaminated soils

Phytoremediation is a widely accepted bioremediation method of treating heavy metal contaminated soils. Nevertheless, the remediation efficiency in multi-metal contaminated soils is still unsatisfactory attributable to susceptibility to different metals. To isolate root-associated fungi for improving phytoremediation efficiency in multi-metal contaminated soils, the fungal flora in root endosphere, rhizoplane, rhizosphere of Ricinus communis L. in heavy metal contaminated soils and non-heavy metal contaminated soils were compared by ITS amplicon sequencing, and then the critical fungal strains were isolated and inoculated into host plants to improve phytoremediation efficiency in Cd, Pb, and Zn-contaminated soils. The fungal ITS amplicon sequencing analysis indicated that the fungal community in root endosphere was more susceptible to heavy metals than those in rhizoplane and rhizosphere soils and Fusarium dominated the endophytic fungal community of R. communis L. roots under heavy metal stress. Three endophytic strains (Fusarium sp. F2, Fusarium sp. F8, and Fusarium sp. F14) isolated from Ricinus communis L. roots showed high resistances to multi-metals and possessed growth-promoting characteristics. Biomass and metal extraction amount of R. communis L. with Fusarium sp. F2, Fusarium sp. F8, and Fusarium sp. F14 inoculation in Cd-, Pb- and Zn-contaminated soils were significantly higher than those without the inoculation. The results suggested that fungal community analysis-guided isolation could be employed to obtain desired root-associated fungi for enhancing phytoremediation of multi-metal contaminated soils.

Bioaccumulation for heavy metal removal: a review

This paper reviews plants and microorganisms removal of heavy metals from contaminated sites through bioaccumulation. Increased industrial activities have led to the uncontrolled release of metals into the environment, resulting in a global increase in metal pollution. Heavy metals are also consumed from the surface of glasses over a prolonged period of use. Heavy metal pollution is a serious problem that can have wide-ranging and long-lasting impacts on human health and the environment. Therefore, effective removal and remediation of heavy metal pollution are crucial to protect human and ecological health. Traditional methods of heavy metal removal, such as chemical treatment and physical removal, can be costly and can also have negative impacts on the environment. The utilization of plants and microorganisms for bioremediation of metal-polluted environments has proven effective for removing metals through accumulation and/or detoxification. This method is effective, economical, versatile, and environmentally friendly. Bioaccumulation utilizes plants and microorganisms to absorb and remove heavy metals from contaminated sites. This method is not only cost-effective but also helps to minimize the environmental impact of heavy metal pollution. Additionally, bioaccumulation can be used in combination with other techniques, such as phytostabilization and phytodegradation, to further improve the efficiency of heavy metal removal. The paper also discusses the use of plants and microorganisms in the removal of heavy metals from water and soil through biomagnification and bioconcentration. Techniques such as phytoaccumulation, phytostimulation, phytodegradation, phytovolatilization, phytostabilization, and phytofiltration are also discussed as effective ways of remediation of heavy metal contaminated sites.

Key Pathways and Genes of Arabidopsis thaliana and Arabidopsis halleri Roots under Cadmium Stress Responses: Differences and Similarities

Cadmium (Cd) is among the world's major health concerns, as it renders soils unsuitable and unsafe for food and feed production. Phytoremediation has the potential to remediate Cd-polluted soils, but efforts are still needed to develop a deep understanding of the processes underlying it. In this study, we performed a comprehensive analysis of the root response to Cd stress in A. thaliana, which can phytostabilize Cd, and in A. halleri, which is a Cd hyperaccumulator. Suitable RNA-seq data were analyzed by WGCNA to identify modules of co-expressed genes specifically associated with Cd presence. The results evidenced that the genes of the hyperaccumulator A. halleri mostly associated with the Cd presence are finely regulated (up- and downregulated) and related to a general response to chemical and other stimuli. Additionally, in the case of A. thaliana, which can phytostabilize metals, the genes upregulated during Cd stress are related to a general response to chemical and other stimuli, while downregulated genes are associated with functions which, affecting root growth and development, determine a deep modification of the organ both at the cellular and physiological levels. Furthermore, key genes of the Cd-associated modules were identified and confirmed by differentially expressed gene (DEG) detection and external knowledge. Together, key functions and genes shed light on differences and similarities among the strategies that the plants use to cope with Cd and may be considered as possible targets for future research.

Multi-faceted CRISPR-Cas9 strategy to reduce plant based food loss and waste for sustainable bio-economy - A review

Currently, international development requires innovative solutions to address imminent challenges like climate change, unsustainable food system, food waste, energy crisis, and environmental degradation. All the same, addressing these concerns with conventional technologies is time-consuming, causes harmful environmental impacts, and is not cost-effective. Thus, biotechnological tools become imperative for enhancing food and energy resilience through eco-friendly bio-based products by valorisation of plant and food waste to meet the goals of circular bioeconomy in conjunction with Sustainable Developmental Goals (SDGs). Genome editing can be accomplished using a revolutionary DNA modification tool, CRISPR-Cas9, through its uncomplicated guided mechanism, with great efficiency in various organisms targeting different traits. This review's main objective is to examine how the CRISPR-Cas system, which has positive features, could improve the bioeconomy by reducing food loss and waste with all-inclusive food supply chain both at on-farm and off-farm level; utilising food loss and waste by genome edited microorganisms through food valorisation; efficient microbial conversion of low-cost substrates as biofuel; valorisation of agro-industrial wastes; mitigating greenhouse gas emissions through forestry plantation crops; and protecting the ecosystem and environment. Finally, the ethical implications and regulatory issues that are related to CRISPR-Cas edited products in the international markets have also been taken into consideration.

Phytoremediation as an Effective Remedy for Removing Trace Elements from Ecosystems

The pollution of soil by trace elements is a global problem. Conventional methods of soil remediation are often inapplicable, so it is necessary to search intensively for innovative and environment-friendly techniques for cleaning up ecosystems, such as phytoremediation. Basic research methods, their strengths and weaknesses, and the effects of microorganisms on metallophytes and plant endophytes resistant to trace elements (TEs) were summarised and described in this manuscript. Prospectively, bio-combined phytoremediation with microorganisms appears to be an ideal, economically viable and environmentally sound solution. The novelty of the work is the description of the potential of "green roofs" to contribute to the capture and accumulation of many metal-bearing and suspended dust and other toxic compounds resulting from anthropopressure. Attention was drawn to the great potential of using phytoremediation on less contaminated soils located along traffic routes and urban parks and green spaces. It also focused on the supportive treatments for phytoremediation using genetic engineering, sorbents, phytohormones, microbiota, microalgae or nanoparticles and highlighted the important role of energy crops in phytoremediation. Perceptions of phytoremediation on different continents are also presented, and new international perspectives are presented. Further development of phytoremediation requires much more funding and increased interdisciplinary research in this direction.

Metal tolerance mechanisms in plants and microbe-mediated bioremediation

The heavy metal contamination, which causes toxic effects on plants, has evolved into a significant constraint to plant quality and yield. This scenario has been exacerbated by booming population expansion and intrinsic food insecurity. Numerous studies have found that counteracting heavy metal tolerance and accumulation necessitates complex mechanisms at the biochemical, molecular, tissue, cellular and whole plant levels, which may demonstrate increased crop yields. Essential and non-essential elements have similar harmful impacts on plants including reduced biomass production, growth and photosynthesis inhibition, chlorosis, altered fluid balance and nutrient absorption, as well as senescence, all of which led to plant death. Notable biotechnological strategies for effective remediation require knowledge of metal stress and tolerance mechanisms in plants. Assimilation, cooperation and integration, of biotechnological improvements, are required for adequate environmental rehabilitation in the emerging area of bioremediation. This review emphasizes a deeper understanding of metal toxicity, stress, and potential tolerance mechanisms in plants exposed to metal stress. The microbe-mediated metal toxic effects and stress mitigation knowledge can be used to create a new strategic plan as feasible, sustainable, and environmentally friendly bioremediation techniques.

Phytoremediation of toxic chemicals in aquatic environment with special emphasis on duckweed mediated approaches

The discharge of toxic chemicals into water bodies and their linked detrimental effects on health is a global concern. Phytoremediation, an environment-friendly plant-based technology, has gained intensive interest over the last decades. For the aquatic phytoremediation process, the commonly available duckweeds have recently attracted significant attention due to their capacity to grow in diverse ecological niches, fast growth characteristics, suitable morphology for easy handling of biomass, and capacity to remove and detoxify various potential toxic elements and compounds. This review presents the progress of duckweed-assisted aquatic phytoremediation of toxic chemicals. A brief background of general phytoremediation processes, including the different phytoremediation methods and advances in understanding their underlying mechanisms, has been described. A summary of different approaches commonly practiced to assess the growth of the plants and their metal removal capacity in the phytoremediation process has also been included. A vast majority of studies have established that duckweed is an efficient plant catalyst to accumulate toxic heavy metals and organic contaminants, such as pesticides, fluorides, toxins, and aromatic compounds, reducing their toxicity from water bodies. The potential of this plant-based phytoremediation process for its downstream applications in generating value-added products for the rural economy and industrial interest has been identified.

Genome and Transcriptome Identification of a Rice Germplasm with High Cadmium Uptake and Translocation

The safe production of food on Cd-polluted land is an urgent problem to be solved in South China. Phytoremediation or cultivation of rice varieties with low Cd are the main strategies to solve this problem. Therefore, it is very important to clarify the regulatory mechanism of Cd accumulation in rice. Here, we identified a rice variety with an unknown genetic background, YSD, with high Cd accumulation in its roots and shoots. The Cd content in the grains and stalks were 4.1 and 2.8 times that of a commonly used japonica rice variety, ZH11, respectively. The Cd accumulation in the shoots and roots of YSD at the seedling stage was higher than that of ZH11, depending on sampling time, and the long-distance transport of Cd in the xylem sap was high. Subcellular component analysis showed that the shoots, the cell wall, organelles, and soluble fractions of YSD, showed higher Cd accumulation than ZH11, while in the roots, only the cell wall pectin showed higher Cd accumulation. Genome-wide resequencing revealed mutations in 22 genes involved in cell wall modification, synthesis, and metabolic pathways. Transcriptome analysis in Cd-treated plants showed that the expression of pectin methylesterase genes was up-regulated and the expression of pectin methylesterase inhibitor genes was down-regulated in YSD roots, but there were no significant changes in the genes related to Cd uptake, translocation, or vacuole sequestration. The yield and tiller number per plant did not differ significantly between YSD and ZH11, but the dry weight and plant height of YSD were significantly higher than that of ZH11. YSD provides an excellent germplasm for the exploration of Cd accumulation genes, and the cell wall modification genes with sequence- and expression-level variations provide potential targets for phytoremediation.

The Role of Plant Growth-Promoting Microorganisms (PGPMs) and Their Feasibility in Hydroponics and Vertical Farming

There are many reasons for the increase in hydroponics/soil-free systems in agriculture, and these systems have now advanced to the form of vertical farming. The sustainable use of space, the reduction in water use compared to soil-based agriculture, the lack of pesticides, the ability to control nutrient inputs, and the implementation of user-friendly technology for environmental control and harvesting are all factors that have made the global market for vertical farming predicted to reach more than USD 10.02 billion by 2027. By comparison, soil-based agriculture consumes 20 times more water, and some agricultural practices promote soil deterioration and cause environmental pollution. Plant growth-promoting microorganisms (PGPMs) have been used extensively in traditional agriculture to enhance plant growth, environmental stress tolerance, and the efficacy of phytoremediation in soil-based farming. Due to the controlled atmosphere in hydroponics and vertical farms, there is strong potential to maximize the use of PGPMs. Here, we review the leveraging of plant growth-promoting microorganism mechanisms in hydroponics and vertical farming. We recommend a synchronized PGPM treatment using a biostimulant extract added to the hydroponic medium while also pre-treating seeds or seedlings with a microbial suspension for aquaponic and aeroponic systems.

Comparative assessment of the heavy metal phytoextraction potential of vegetables from agricultural soils: A field experiment

A field study was established to determine the phytoextraction potential of six vegetable species, namely Amaranthus viridis L., Basella alba L., Brassica chinensis var. Parachinensis, Brassica rapa L., Capsicum frutescens L., and Ocimum tenuiflorum L.. These edible plants were selected for their short growth cycles and high biomass production, which are some traits for efficient phytoremediation. Following acid digestion of the soil and vegetable samples using the USEPA 3050B acid digestion method, the extracts were analyzed for Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn using ICP-OES. Results in soil samples showed that the concentrations of both beneficial and essential heavy metals, and non-essential heavy metals are below the WHO, USEPA, and CCME soil quality guidelines. Al is one of the highest concentrations found in the soil samples but it tends to accumulate in the root part of all vegetable species compared to the aboveground parts. In general, B. rapa L. accumulated the highest level of Cd (0.4 mg/kg) and Pb (5.71 mg/kg), while B. alba L. accumulated the highest Cr (2.62 mg/kg) in all plant parts. The findings in this study indicated that Co, Cu, Fe, Mn and Zn were mostly accumulated in leaves of A. viridis L. (Co, Cu, Fe, Mn and Zn), B. alba L. (Co, Fe and Mn), B. chinensis (Mn and Zn) and O. tenuiflorum L. (Mn), and roots of C. frutescens L. (Co, Cu, Fe and Mn), B. alba L. (Co, Cu and Zn), A. viridis L. and B. chinensis (Cu and Fe) and B. rapa L. (Fe). Cr, Pb and Ni were significantly greater in B. alba L. (Cr) And B. rapa L. (Ni and Pb) roots. MTF >1 was observed in the roots of all species for Co, Cd, Zn, and Ni. BTC values varied between the different vegetable species with A. viridis L. having the greatest heavy metal mobility between its plant parts and the best heavy metal phytoextraction potential among other species. The PCA biplots showed that heavy metals were partitioned differently between various plant parts of the vegetable species and can be explained by the first two components (PC1 and PC2) which were associated with the root and/or leaf parts for most vegetable species.

Wastewater generation and treatment by various eco-friendly technologies: Possible health hazards and further reuse for environmental safety

The discharge of untreated wastewater as a result of various developmental activities such as urbanization, industrialization and changes in lifestyle poses great threats to aquatic ecosystems as well as humans. Currently, ∼380 billion m³ (380 trillion liters) of wastewater is generated globally every year. Around 70% of freshwater withdrawals are used for agricultural production throughout the world. The wastewater generated through agricultural run-off further pollutes freshwater resources. However, only 24% of the total wastewater generated from households and industries is treated before its disposal in rivers or reused in agriculture. The most problematic contaminants associated with ecological toxicity are heavy metals such as Cd, Cr, Cu, Ni, Zn, Fe, Pb, Hg, As and Mn. One of the most important issues linked with wastewater generation is the residual presence of pathogenic microorganisms which pose potential health hazards to consumers when they enter into the food chain. It is estimated that in India almost USD 600 million (48.60 billion INR) is spent per year to tackle waterborne diseases (WBD). In light of this, immediate action is needed to effectively treat wastewater and develop safer reuse prospects. Various wastewater treatment technologies have been established and they work well to provide an alternative water source to meet the growing demand. The main concern towards treating wastewater is to eliminate inorganic and organic substances and lower the nutrient concentration, total solids, and microbial pathogens to prevent freshwater pollution and health risks.

Phytoremediation potential of hybrid Pennisetum in cadmium-contaminated soil and its physiological responses to cadmium

Cadmium (Cd) contamination in soil is a global problem. Recently, phytoremediation with plants, possessing high biomass and moderate Cd enrichment ability, has received excessive attention as a cost-effective method for Cd remediation from the soil. In this study, the plant growth, physiological responses, Cd concentration, accumulation, and distribution of the C4 grass hybrid Pennisetum (HP) were studied in different levels of Cd-contaminated soil in a pot experiment. Furthermore, a field trial was also conducted to accurately assess its practical phytoremediation potential in natural Cd-contaminated fallow filed. The results showed that HP possessed effective antioxidant enzymes to scavenge ROS and strong physiological coordination in response to Cd stress. The HP had a considerable Cd enrichment ability, and the maximal Cd uptake of 1.08 mg plant^-1 was achieved at 60 mg kg^-1 Cd in the pot. The maximal concentration of Cd in the aboveground parts and roots of HP were 49.33 mg kg^-1 and 103.33 mg kg^-1, respectively, when soil Cd was 70 mg kg^-1 in the pot. The bioconcentration factor (BCF) of Cd in the aboveground parts was less than 1, while the BCF in the root was greater than 1, and the translocation factor (TF) was less than 0.5 in all Cd treatment groups. A total of 46.89-65.46% absorbed Cd stored in the aboveground parts in the pot. The Cd concentration in roots of HP was significantly higher compared to those in leaves and stems, and all BCFs were greater than 1.5 in a lightly Cd-contaminated field (0.35 mg kg^-1). Furthermore, HP had high aboveground dry biomass up to 54.63 t ha^-1 and accumulated 16.13 g ha^-1 Cd in its aboveground parts in the field, which was accounted for about 91.54% of the total Cd extracted by the plant. The soil Cd concentration was reduced by 60.00% after planting HP. Our results suggest that HP is a potential phytoextractor for Cd in lightly Cd-contaminated soil as well as a phytostabilizer under strong Cd stress in the pot.

Cadmium toxicity in medicinal plants: An overview of the tolerance strategies, biotechnological and omics approaches to alleviate metal stress

Medicinal plants, an important source of herbal medicine, are gaining more demand with the growing human needs in recent times. However, these medicinal plants have been recognized as one of the possible sources of heavy metal toxicity in humans as these medicinal plants are exposed to cadmium-rich soil and water because of extensive industrial and agricultural operations. Cadmium (Cd) is an extremely hazardous metal that has a deleterious impact on plant development and productivity. These plants uptake Cd by symplastic, apoplastic, or via specialized transporters such as HMA, MTPs, NRAMP, ZIP, and ZRT-IRT-like proteins. Cd exerts its effect by producing reactive oxygen species (ROS) and interfere with a range of metabolic and physiological pathways. Studies have shown that it has detrimental effects on various plant growth stages like germination, vegetative and reproductive stages by analyzing the anatomical, morphological and biochemical changes (changes in photosynthetic machinery and membrane permeability). Also, plants respond to Cd toxicity by using various enzymatic and non-enzymatic antioxidant systems. Furthermore, the ROS generated due to the heavy metal stress alters the genes that are actively involved in signal transduction. Thus, the biosynthetic pathway of the important secondary metabolite is altered thereby affecting the synthesis of secondary metabolites either by enhancing or suppressing the metabolite production. The present review discusses the abundance of Cd and its incorporation, accumulation and translocation by plants, phytotoxic implications, and morphological, physiological, biochemical and molecular responses of medicinal plants to Cd toxicity. It explains the Cd detoxification mechanisms exhibited by the medicinal plants and further discusses the omics and biotechnological strategies such as genetic engineering and gene editing CRISPR- Cas 9 approach to ameliorate the Cd stress.

Dynamics of heavy metals during the development and decomposition of leaves of Avicennia marina and Kandelia obovata in a subtropical mangrove swamp

In mangrove wetlands, leaves make up a high proportion of the plant biomass and can accumulate heavy metals from contaminated sediment. Despite this, it is still unclear how heavy metal concentrations in leaves change as they develop and how metals in senescence leaves are recycled back into the mangrove ecosystems during decomposition. The present study aims to investigate the dynamics of six heavy metals (Cu, Zn, Cr, Ni, Cd, and Pb) in leaves of two common mangrove plants, Avicennia marina and Kandelia obovata, at different stages of development (young, mature, and senescent) and leaf litter decomposition (from 0 to 20 weeks). Based on litterbag experiments in a subtropical mangrove swamp, both plant species showed similar trends in alternations of the six heavy metals during leaf development, that was, decreased in Cu and Zn but increased in Pb, while Cr, Ni, and Cd remained steady. All heavy metals in litter gradually increased in concentration during decomposition. By the end of the 20-weeks decomposition, the concentrations of Cu, Zn, and Cd in decayed leaves were comparable to those in sediment, with Cu, Zn, and Cd at approximately 18, 75, and 0.2 mg·kg^-1, respectively, while Cr (66 mg·kg^-1), Ni (65 mg·kg^-1), and Pb (55 mg·kg^-1) were lower than those in sediment, indicating that metals were not retained in litter but recycled back to the sediment. Tannins in mangrove leaf litter might chelate heavy metals, affecting their migration and transformation of heavy metals in estuarine mangrove wetlands. The findings of our study provide insight into the interactions between toxic heavy metals and mangrove plant species during leaf development, representing the first example of how most metals would be retained in leaf litter during decomposition, thereby reducing their release to estuarine and marine ecosystems.

Autochthonous strains of Trichoderma isolated from tannery solid waste improve phytoextraction potential of heavy metals by sunflower

This research work was aimed at isolating and demonstrating the significant potential of autochthonous fungi for phytoextraction of hazardous metals in metal polluted soil using Helianthus annuus. Four multi-metal resistant strains of Trichoderma were selected from a total of 21 strains isolated from tannery polluted soil and tannery solid waste. Autochthonous Trichoderma strains were used singly and in the form of consortium (TC). Sunflower was grown in pots for 90 days having eight different amendments of tannery polluted soil with and without Trichoderma inoculation. Growth and biochemical attributes of the plants were observed along with metal content extract by different plant parts. The results revealed that TC enhanced shoot length, shoot dry weight, and metal uptake as compared to single specie inoculation. Similarly, BCF (72.8-118.23%) and TF were significantly pronounced in shoots of H. annuus grown with TC at 40% amended soil. The biochemical analysis of the plants showed that Trichoderma strains boosted the enzymatic (catalase, peroxidase, and superoxide dismutase) antioxidants in the plants. The use of indigenous fungi with metal accumulating plants like sunflower can help to alleviate metal contamination from industrial sites and can make the soil cultivable for energy crops.

Application of Salvinia sps. in remediation of reactive mixed azo dyes and Cr (VI) - Its pathway elucidation

The emerging industrialization has resulted in the rapid growth of textile industries across the globe. The presence of xenobiotic pollutants in textile wastewater threatens the ecosystem. Applying different microbes (bacteria, fungi & algae) has paved the way for phytoremediation - the eco-friendly, cost-effective method. The present study focuses on the phytoremediation of reactive dyes - Reactive red, Reactive Brown & Reactive Black and Cr (VI) in synthetic textile wastewater using Salvinia sps. The mixed azo dyes of each 100 mg/L showed decolourization of 75 ± 0.5% and 82 ± 0.5% of removal of 20 mg/L of Cr (VI) after eight days of incubation in a phytoreactor setup. Chlorophyll analysis revealed the gradual decrease in the photosynthetic pigments during the remediation. The degraded metabolites were analyzed using FT-IR and showed the presence of aromatic amines on day zero, which were converted to aliphatic amines on day four. The GC-MS analysis revealed the disruption of -NN- bond, rupture of -CN- bond, scission of -N-N-bond, and loss of -SO₃H from the Reactive Black dye leading to the formation of an intermediate p-Hydroxy phenylhydrazinyl. The rupture of Reactive red dye resulted in the formation of p-Hydrazinyl toluene sulphonic acid, Naphthyl amine -3,6-disulphonic acid and 8-Hydroxy Naphthyl amine -3,6-disulphonic acid. Decarboxylation, desulphonation, deoxygenation and deamination of Reactive Brown dye showed the presence of different metabolites and metabolic pathways were proposed for the reactive azo dyes which were phytoremediated.

Effect of graphene oxide on the uptake, translocation and toxicity of metal mixture to Lepidium sativum L. plants: Mitigation of metal phytotoxicity due to nanosorption

Due to its unique structure and exceptional properties, graphene oxide (GO) is increasingly used in various fields of industry and therefore is inevitably released into the environment, where it interacts with different contaminants. However, the information relating to the ability of GO to affect the toxicity of contaminants is still limited. Therefore, the aim of our study was to synthesize GO, to examine the phytotoxicity of different concentrations of GO and its co-exposure with the metal mixture using garden cress (Lepidium sativum L.) as a test organism and to evaluate the potential of GO to affect toxicity of metals and their uptake by plants. The metal mixture (MIX) containing Ni (II), Zn (II), Cr (III) and Cu (II) was prepared in accordance with the maximum-permissible-concentrations (MPC) accepted for the inland waters in the EU. Additionally, the capacity of GO to adsorb metals was studied in specific conditions of the phytotoxicity test and assessed using adsorption isotherms. Our data indicate that in most cases the tested concentrations of MIX, GO and MIX + GO did not affect seed germination, root growth and biomass of roots and seedlings, however, they were found to alter photosynthesis processes, enhance production of carotenoids and H₂O₂ as well as to activate lipid peroxidation. Additionally, our study revealed that GO affects the accumulation of tested metals in roots and shoots of the MIX-exposed L. sativum. This is due to the capacity of GO to adsorb metals from the growth medium. Therefore, low concentrations of GO can be used for water decontamination.

Assisted Phytostabilization of Mine-Tailings with Prosopis laevigata (Fabaceae) and Biochar

Phytoremediation is a cost-effective technique to remediate heavy metal (HM) polluted sites. However, the toxic effects of HM can limit plant establishment and development, reducing phytoremediation effectiveness. Therefore, the addition of organic amendments to mine wastes, such as biochar, improves the establishment of plants and reduces the bioavailability of toxic HM and its subsequent absorption by plants. Prosopis laevigata can establish naturally in mine tailings and accumulate different HM; however, these individuals show morphological and genetic damage. In this study, the effect of biochar on HM bioaccumulation in roots and aerial tissues, HM translocation, morphological characters and plant growth were evaluated, after three and six months of exposure. Plants grown on mine tailings with biochar presented significantly higher values for most of the evaluated characters, in respect to plants that grew on mine tailing substrate. Biochar addition reduced the bioaccumulation and translocation of Cu, Pb, and Cd, while it favored the translocation of essential metals such as Fe and Mn. The addition of biochar from agro-industrial residues to mine tailings improves the establishment of plants with potential to phytoextract and phytostabilize metals from polluted soils. Using biochar and heavy metal accumulating plants constitutes an assisted phytostabilization strategy with great potential for HM polluted sites such as Cd and Pb.

Heavy Metals Contained Within a Pb-Zn Waste Heap Exhibit Selective Association with Microbial Modules as Revealed by Network Analysis

Heavy metal contamination is a global environmental concern due to its persistence and toxicity. To explore soil microbial interaction mechanisms and their association with heavy metals on a Pb-Zn waste heap, ecological network analysis tools were used to analyze high-throughput data in microbiology. The microbial network was divided into several modules, but heavy metals were associated with specific modules. The heavy metal-tolerant module (M2) had a more negative than positive relationship with the heavy metal-mid-tolerant modules (M1 and M3). Tight coupling between fungal and bacterial operational taxonomic units (OTUs) within M2 was critical for module stability and heavy metal bioremediation. Additionally, members within M2 needed to form a positive relationship to cope with heavy metal contamination (As, Pb, Zn, Cu, and Cd). The study provides fundamental information for a deeper understanding of heavy metal bioremediation mechanisms in the Pb-Zn waste heap.

CRISPR/Cas9 technology as an innovative approach to enhancing the phytoremediation: Concepts and implications

Phytoremediation is currently an active field of research focusing chiefly on identifying and characterizing novel and high chelation action super-accumulators. In the last few years, molecular tools have been widely exploited to understand better metal absorption, translocation, cation, and tolerance mechanisms in plants. Recently more advanced CRISPR-Cas9 genome engineering technology is also employed to enhance detoxification efficiency. Further, advances in molecular science will trigger the understanding of adaptive phytoremediation ability plant production in current global warming conditions. The enhanced abilities of nucleases for genome modification can improve plant repair capabilities by modifying the genome, thereby achieving a sustainable ecosystem. The purpose of this manuscript focuses on biotechnology's fundamental principles and application to promote climate-resistant metal plants, especially the CRISPR-Cas9 genome editing system for enhancing the phytoremediation of harmful contamination and pollutants.

Genetic variation and molecular characterization of Zygophyllum coccineum L. ecotypes of the iron mining area of El-Wahat El-Bahariya in Egypt

Remediation and mitigation processes can recover the ecosystems affected by mining operations. Zygophyllum coccineum L. is a native indigenous xerophyte that grows in Egypt's Western Desert, particularly around the iron mining ore deposits, and accumulates high rates of potentially toxic elements (PTEs) in its succulent leaves. The present study evaluated the genetic variation and molecular responses of Z. coccineum to heavy metal stressful conditions in three sites. Results revealed that Z. coccineum bioaccumulation capacity was greater than unity and varied amongst the three locations. In response to heavy metal toxicity, Z. coccineum plants boosted their antioxidative enzymes activity and glutathione levels as a tolerance strategy. Anatomically, a compact epidermis, a thick spongy mesophyll with water storage cells, and a thicker vascular system were observed. Protein electrophoretic analysis yielded 20 fragments with a polymorphism rate of 85%. The antioxidant genes (CAT: catalase, POD: peroxidase and GST: polyphenol oxidase) showed greater levels of expression. In addition, DNA-based molecular genetic diversity analyses using Start Codon Targeted (SCoT) and Inter Simple Sequence Repeat (ISSR) markers yielded 54 amplified fragments (i.e. 24 monomorphic and 30 polymorphic), with 12 unique fragments and a polymorphism rate of 55.5%. The greatest PIC values were recorded for SCoT-6 (0.36) and for both of the 14 A and 44 B ISSR primers (0.25). Diversity index (DI) of all SCoT and ISSR amplified primers was 0.23. The present findings reveal the distinct heavy metal's adaption attributes of Z. coccineum, indicating its improved survival in severely arid mining environments.

Understanding the Effect of Irrigation with Chromium Loaded Tannery Effluent on Ocimum basilicum L. vis-a-vis Metal Uptake

In this study, we investigated the effect of irrigation with heavy metal loaded tannery effluent on Ocimum basilicum L., an important aromatic crop for utilization of tannery wastewater and remediation of chromium rich tannery affected soils. The soil was irrigated with three different dilutions of tannery wastewater viz. 50%, 75% and 100% of tannery effluents (T, UD and U) including control. The maximum herbal biomass (105.17 g plant^-1) was found in UD100. Although oil quality was not affected by application of tannery effluents, the oil yield was decreased significantly, as compared to control, in all treatments except in UD75. The chromium concentration in different plant parts was in order of root > shoot > leaf. This indicates O. basilicum is an effective aromatic crop for remediation of tannery affected sites without any effect on crop growth, oil yield per unit area and oil quality and increase in soil fertility.

The Mercury Concentration in Spice Plants

Spice plants are popularly used as ingredients in food products. Promoting healthy eating, paying attention to the quality of products, means that organic and self-produced ingredients, whose origin and growing conditions are known, are gaining popularity. The study determined the concentration of mercury (Hg) in popular leafy spice plants: peppermint (Mentha piperita), common basil (Ocimum basilicum), lovage (Levisticum officinale) and parsley (Petroselinum crispum). Self-grown spices and ready-made commercial products were selected for the study. The Hg content in the test samples was determined by the AAS method (AMA 254, Altec, Praha, Czech Republic). The range of Hg content in the tested spice samples ranged from 1.20 to 17.35 µg/kg, on average 6.95 µgHg/kg. The highest concentration of Hg was recorded in the peppermint, 9.39 µg/kg. In plants grown independently, the concentration of Hg was statistically significantly higher than in commercial products purchased in a store. There were no differences in the concentration of Hg in organic and non-organic spices. Commercial spices defined by producers as organic products did not differ statistically significantly in the level of Hg content from non-organic products.