Foliar Application of Chitosan Increases Tomato Growth and Influences Mycorrhization and Expression of Endochitinase-Encoding Genes

Investigating the impact of oligo-chitosan on the growth dynamics and yield traits of Oryza sativa L. 'BRRI dhan29' under subtropical conditions

Reducing the harmful chemical use along with obtaining potential yield in field is a worth exploring practice in rice cultivation. To mitigate the prevailing yield gap, the current study was designed to evaluate the effect of chitosan in improving growth, yield contributing characters and yield of rice. The experiment comprised eight different treatments viz. control (no fertilizer and Chitosan) (T0), conventional method (with fertilizers) (T1), conventional method with foliar spray of 100 ppm chitosan solution (T2), conventional method with foliar spray of 300 ppm chitosan solution (T3), conventional method with foliar spray of 500 ppm chitosan solution (T4), only foliar spray of 100 ppm chitosan solution (T5), only foliar spray of 300 ppm chitosan solution (T6), and only foliar spray of 500 ppm chitosan solution (T7). The experiment was laid out in a completely randomized block design containing three replications. Data on different vegetative and yield contributing characters were recorded to evaluate the treatments effectiveness in improving rice yield. Different growth and yield contributing characters showed significant improvement after applying chitosan in addition to the conventional production system. The conventional method with foliar spray of 500 ppm chitosan solution had a greater positive effect on yield contributing characters and yield. In vegetative characters, the highest plant height became (87.3 cm), number of tiller hill-1 (13.7), Total dry matter (12.9), leaf area index (1.35), and chlorophyll content (57.73). On the basis of assessed treatments in yield contributing characters and yield, the highest plant height was (91.8 cm), no. of grains panicle-1 (145.29), grain yield (6.37 t ha-1), straw yield (6.47 t ha-1). Results showed that the conventional method with foliar spray of different concentration of chitosan solution was able to increase yield up to 26 % in comparison to the conventional method. Overall, our findings suggest that additional foliar spray of chitosan with previously recommended cultivation practice can increase the yield per unit area and offers promising technology to achieve potential yield in farmer's field.

Emerging Nanochitosan for Sustainable Agriculture

Chemical-intensive agriculture challenges environmental sustainability and biodiversity and must be changed. Minimizing the use of agrochemicals based on renewable resources can reduce or eliminate ecosystems and biodiversity threats. Nanochitosan as a sustainable alternative offers promising solutions for sustainable agricultural practices that work at multiple spatial and temporal scales throughout the plant growth cycle. This review focuses on the potential of nanochitosan in sustainable agricultural production and provides insights into the mechanisms of action and application options of nanochitosan throughout the plant growth cycle. We emphasize the role of nanochitosan in increasing crop yields, mitigating plant diseases, and reducing agrochemical accumulation. The paper discusses the sources of nanochitosan and its plant growth promotion, antimicrobial properties, and delivery capacity. Furthermore, we outline the challenges and prospects of research trends of nanochitosan in sustainable agricultural production practices and highlight the potential of nanochitosan as a sustainable alternative to traditional agrochemicals.

Chitosan-thiourea and their derivatives: Applications and action mechanisms for imparting drought tolerance

The increasing abiotic stresses from changing global climatic conditions, including drought, extreme temperatures, salinity, storms, pollutants, and floods, impend crop cultivation and sustainability. To mitigate these effects, numerous synthetic and non-synthetic chemicals or plant growth regulators are in practice. Chitosan, a natural organic substance rich in nitrogen and carbon, and thiourea, a synthetic plant growth regulator containing sulfur and nitrogen, have garnered significant interest for their roles in enhancing plant stress tolerance. Despite extensive use, the precise mechanisms of their actions remain unclear. Towards this endeavor, the present review examines how chitosan and thiourea contribute to stress tolerance in crop plants, particularly under drought conditions, to improve production and sustainability. It also explores thiourea's potential as a hydrogen sulfide (H2S) donor and the possible applications of thiolated chitosan derivatives and chitosan-thiourea combinations, emphasizing their biological functions and benefits for sustainable agriculture.

Synergistic effect of nano-potassium and chitosan as stimulants inducing growth and yield of bird of paradise (Sterlitiza reginae L.) in newly lands

The bird of paradise plant is a clumping tropical species native to South Africa. It is a dramatic plant with distinctive iridescent orange and midnight blue flowers that resemble an exotic bird peeking out from the broad leaves in autumn, winter and spring. An experiment was conducted during the two seasons of 2021 and 2022 at a private farm in Damanhour, Beheira Governorate, Egypt (31"°" 04 "°"N, 30"°" 47' °E) to study the effect different concentrations of nano-potassium and chitosan and their combinations on the bird of Paradise (Sterlitiza reginae). The experiment was conducted in a randomized complete block in a split-plot design with five replicates; nano-potassium was used at 0, 100, 150, and 200 mg/l and assigned to the main plots, whereas the sub-plots involved 0, 0.25, 0.50 and 0.75 g/l of chitosan. An increase in plant height and leaf length was recorded when the plants were treated with 200 mg/l nano-potassium and 0.75 g/l chitosan. Spraying plants with concentrations of 150 mg/l nano-potassium and 0.75 g/l chitosan is associated with the superiority of S. reginae plants in other traits, such as leaves wide, number of leaves/plant, days to flowering, number of inflorescence/plant, number of florets/inflorescence, stalk length and diameter, inflorescence weight, longevity of inflorescence, and flowering period, compared to the other treatments. We conclude that adding nano-potassium and/or chitosan to the bird of paradise plant leads to an improvement in terms of vegetative and yield characteristics under newly reclaimed lands.

Graphene oxide-based nanocomposites for outstanding eco-friendly antifungal potential against tomato phytopathogens

To obtain the collaborative antifungal potential of nanocomposites conjugated with graphene oxide (GO), a combination of GO with chitosan (CS/GO) and GO with chitosan (CS) and polyaniline (PANI/CS/GO) was carried out. The synthesized GO-nanocomposites were recognized by several techniques. Vanillin (Van.) and cinnamaldehyde (Cinn.) were loaded on the prepared nanocomposites as antioxidants through a batch adsorption process. In vitro release study of Van. and Cinn. from the nanocomposites was accomplished at pH 7 and 25°C. The antimicrobial activity of GO, CS/GO, and PANI/CS/GO was studied against tomato Fusarium oxysporum (FOL) and Pythium debaryanum (PYD) pathogens. The loaded ternary composite PANI/CS/GO exhibited the best percent of reduction against the two pathogens in vitro studies. The Greenhouse experiment revealed that seedlings' treatment by CS/GO/Van. and PANI/CS/GO/Van significantly lowered both disease index and disease incidence. The loaded CS/GO and PANI/CS/GO nanocomposites had a positive effect on lengthening shoots. Additionally, when CS/GO/Cinn., CS/GO/Van. and PANI/CS/GO/Van. were used, tomato seedlings' photosynthetic pigments dramatically increased as compared to infected control. The results show that these bio-nanocomposites can be an efficient, sustainable, nontoxic, eco-friendly, and residue-free approach for fighting fungal pathogens and improving plant growth.

The efficacy of chemical inducers and fungicides in controlling tomato root rot disease caused by Rhizoctoniasolani

Chitosan is an environmentally friendly natural substance that is used in crop disease management as an alternative to chemical pesticides. A significant issue restricting output in Egypt is root rot, which is a disease, caused by Rhizoctonia solani. Therefore, a greenhouse experiment was conducted to assess the effects of R. solani on 60-day-old tomato plants under fungal infection and to determine the antifungal activity of chitosan and Rizolax T fungicide against the pathogenic fungus. The findings demonstrated that 4 g/L of chitosan seed application completely obstructed the radial mycelial growth of R. solani and decreased the disease severity. Pathogenic infection significantly decreased morphological characteristics and total chlorophyll but significantly increased carotenoid, total thiol, non-protein thiol, protein thiol, antioxidant enzymes, oxidative stress, total phenolic, total flavonoid, and isoflavone compared to healthy plants. Tomato plants treated with chitosan exhibited lower rates of oxidative stress, but higher levels of all previously mentioned parameters compared to untreated infected plants. The number and molecular mass of protein banding patterns varied in all treated tomato plants as compared to the healthy control. There are 42 bands in the treatments, and their polymorphism rate is 69.55%. Moreover, the number and density of α- and β-esterase, and peroxidase isozymes in treated tomato plants exhibited varied responses. Moreover, in treated and control plants, chitosan treatment raised the expression levels of phenylalanine ammonia-lyase, pathogenesis-related protein-1, β-1,3-glucanases and chitinase. In conclusions, chitosan reduces R. solani infection by controlling the biochemical and molecular mechanisms in tomato plants during infection.

Investigating the simultaneous effect of chitosan and arbuscular mycorrhizal fungi on growth, phenolic compounds, PAL enzyme activity and lipid peroxidation in Salvia nemorosa L

Considering the importance of Salvia nemorosa L. in the pharmaceutical and food industries, and also beneficial approaches of arbuscular mycorrhizal fungi (AMF) symbiosis and the use of bioelicitors such as chitosan to improve secondary metabolites, the aim of this study was to evaluate the performance of chitosan on the symbiosis of AMF and the effect of both on the biochemical and phytochemical performance of this plant and finally introduced the best treatment. Two factors were considered for the factorial experiment: AMF with four levels (non-inoculated plants, Funneliformis mosseae, Rhizophagus intraradices and the combination of both), and chitosan with six levels (0, 50, 100, 200, 400 mg L-1 and 1% acetic acid). Four months after treatments, the aerial part and root length, the levels of lipid peroxidation, H2O2, phenylalanine ammonia lyase (PAL) activity, total phenol and flavonoid contents and the main secondary metabolites (rosmarinic acid and quercetin) in the leaves and roots were determined. The flowering stage was observed in R. intraradices treatments and the highest percentage of colonization (78.87%) was observed in the treatment of F. mosseae × 400 mg L-1 chitosan. Furthermore, simultaneous application of chitosan and AMF were more effective than their separate application to induce phenolic compounds accumulation, PAL activity and reduce oxidative compounds. The cluster and principal component analysis based on the measured variables indicated that the treatments could be classified into three clusters. It seems that different treatments in different tissues have different effects. However, in an overview, it can be concluded that 400 mg L-1 chitosan and F. mosseae × R. intraradices showed better results in single and simultaneous applications. The results of this research can be considered in the optimization of this medicinal plant under normal conditions and experiments related to abiotic stresses in the future.

Chitosan combined with humic applications during sensitive growth stages to drought improves nutritional status and water relations of sweet potato

The current decline in freshwater resources presents a significant global challenge to crop production, a situation expected to intensify with ongoing climate change. This underscores the need for extensive research to enhance crop yields under drought conditions, a priority for scientists given its vital role in global food security. Our study explores the effects of using humic and chitosan treatments to alleviate drought stress during critical growth phases and their impact on crop yield and water efficiency. We employed four different irrigation strategies: full irrigation, 70% irrigation at the early vine development stage, 70% irrigation during the storage root bulking stage, and 85% irrigation across both stages, complemented by full irrigation in other periods. The plants received either humic treatments through foliar spray or soil application, or chitosan foliar applications, with tap water serving as a control. Our findings highlight that the early vine development stage is particularly vulnerable to drought, with a 42.0% decrease in yield observed under such conditions. In normal growth scenarios, foliar application of humic substances significantly improved growth parameters, resulting in a substantial increase in yield and water efficiency by 66.9% and 68.4%, respectively, compared to the control treatment under full irrigation. For sweet potatoes irrigated with 70% water at the storage root bulking stage, ground application of humic substances outperformed both foliar applications of chitosan and humic in terms of yield results. The highest tuber yield and water efficiency were attained by combining chitosan and humic ground applications, regardless of whether 70% irrigation was used at the storage root bulking stage or 85% irrigation during both the early vine development and storage root bulking stages.

Chitosan, chitosan derivatives, and chitosan-based nanocomposites: eco-friendly materials for advanced applications (a review)

For many years, chitosan has been widely regarded as a promising eco-friendly polymer thanks to its renewability, biocompatibility, biodegradability, non-toxicity, and ease of modification, giving it enormous potential for future development. As a cationic polysaccharide, chitosan exhibits specific physicochemical, biological, and mechanical properties that depend on factors such as its molecular weight and degree of deacetylation. Recently, there has been renewed interest surrounding chitosan derivatives and chitosan-based nanocomposites. This heightened attention is driven by the pursuit of enhancing efficiency and expanding the spectrum of chitosan applications. Chitosan's adaptability and unique properties make it a game-changer, promising significant contributions to industries ranging from healthcare to environmental remediation. This review presents an up-to-date overview of chitosan production sources and extraction methods, focusing on chitosan's physicochemical properties, including molecular weight, degree of deacetylation and solubility, as well as its antibacterial, antifungal and antioxidant activities. In addition, we highlight the advantages of chitosan derivatives and biopolymer modification methods, with recent advances in the preparation of chitosan-based nanocomposites. Finally, the versatile applications of chitosan, whether in its native state, derived or incorporated into nanocomposites in various fields, such as the food industry, agriculture, the cosmetics industry, the pharmaceutical industry, medicine, and wastewater treatment, were discussed.

Strategies for the Preparation of Chitosan Derivatives for Antimicrobial, Drug Delivery, and Agricultural Applications: A Review

Chitosan has received much attention for its role in designing and developing novel derivatives as well as its applications across a broad spectrum of biological and physiological activities, owing to its desirable characteristics such as being biodegradable, being a biopolymer, and its overall eco-friendliness. The main objective of this review is to explore the recent chemical modifications of chitosan that have been achieved through various synthetic methods. These chitosan derivatives are categorized based on their synthetic pathways or the presence of common functional groups, which include alkylated, acylated, Schiff base, quaternary ammonia, guanidine, and heterocyclic rings. We have also described the recent applications of chitosan and its derivatives, along with nanomaterials, their mechanisms, and prospective challenges, especially in areas such as antimicrobial activities, targeted drug delivery for various diseases, and plant agricultural domains. The accumulation of these recent findings has the potential to offer insight not only into innovative approaches for the preparation of chitosan derivatives but also into their diverse applications. These insights may spark novel ideas for drug development or drug carriers, particularly in the antimicrobial, medicinal, and plant agricultural fields.

Chitosan Enhances Low-Dosage Difenoconazole to Efficiently Control Leaf Spot Disease in Pseudostellaria heterophylla (Miq.) Pax

Pseudostellaria heterophylla (Miq.) Pax is a popular clinical herb and nutritious health food. However, leaf spot disease caused by fungal pathogens frequently occurs and seriously influences the growth, quality, and yield of P. heterophylla. In this work, the field control roles of difenoconazole, chitosan, and their combination in the leaf spot disease in P. heterophylla and their effects on the disease resistance, photosynthetic capacity, medicinal quality, and root yield of P. heterophylla are investigated. The results manifest that 37% difenoconazole water-dispersible granule (WDG) with 5000-time + chitosan 500-time dilution liquid had a superior control capacity on leaf spot disease with the control effects of 91.17%~88.19% at 15~30 days after the last spraying, which significantly (p < 0.05) exceeded that of 37% difenoconazole WDG 3000-time dilution liquid and was significantly (p < 0.01) higher than that of 37% difenoconazole WDG 5000-time dilution liquid, chitosan 500-time dilution liquid, or chitosan 1000-time dilution liquid. Simultaneously, this combination could more effectively enhance the disease resistance, photosynthetic capacity, medicinal quality, and tuberous root yield of P. heterophylla compared to when these elements were applied alone, as well as effectively reduce difenoconazole application. This study emphasizes that chitosan combined with a low dosage of difenoconazole can be proposed as a green, efficient, and alternative formula for controlling leaf spot disease in P. heterophylla and enhancing its resistance, photosynthesis, quality, and yield.

Chitosan-induced biotic stress tolerance and crosstalk with phytohormones, antioxidants, and other signalling molecules

Several polysaccharides augment plant growth and productivity and galvanise defence against pathogens. Such elicitors have ecological superiority over traditional growth regulators, considering their amplified biocompatibility, biodegradability, bioactivity, non-toxicity, ubiquity, and inexpensiveness. Chitosan is a chitin-derived polysaccharide that has recently been spotlighted among plant scientists. Chitosan supports plant growth and development and protects against microbial entities such as fungi, bacteria, viruses, nematodes, and insects. In this review, we discuss the current knowledge of chitosan's antimicrobial and insecticidal potential with recent updates. These effects are further explored with the possibilities of chitosan's active correspondence with phytohormones such as jasmonic acid (JA), salicylic acid (SA), indole acetic acid (IAA), abscisic acid (ABA), and gibberellic acid (GA). The stress-induced redox shift in cellular organelles could be substantiated by the intricate participation of chitosan with reactive oxygen species (ROS) and antioxidant metabolism, including hydrogen peroxide (H2O2), superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD). Furthermore, we propose how chitosan could be intertwined with cellular signalling through Ca2+, ROS, nitric oxide (NO), transcription factors (TFs), and defensive gene activation.

Biostimulant and Elicitor Responses to Cricket Frass (Acheta domesticus) in Tomato (Solanum lycopersicum L.) under Protected Conditions

Agriculture in the current century is seeking sustainable tools in order to generate plant production systems with minimal negative environmental impact. In recent years it has been shown that the use of insect frass is an option to be used for this purpose. The present work studied the effect of low doses (0.1, 0.5, and 1.0% w/w) of cricket frass (Acheta domesticus) in the substrate during the cultivation of tomatos under greenhouse conditions. Plant performance and antioxidant enzymatic activities were measured in the study as explicative variables related to plant stress responses in order to determine possible biostimulant or elicitor effects of cricket frass treatments during tomato cultivation under greenhouse conditions. The main findings of this study indicated that tomato plants responded in a dose dependent manner to cricket frass treatments, recalling the hormesis phenomenon. On the one hand, a 0.1% (w/w) cricket frass treatment showed typical biostimulant features, while on the other hand, 0.5 and 1.0% treatments displayed elicitor effects in tomato plants under evaluated conditions in the present study. These results support the possibility that low doses of cricket frass might be used in tomato cultivation (and perhaps in other crops) for biostimulant/elicitor input into sustainable production systems.

Chitosan nanoparticles support the impact of arbuscular mycorrhizae fungi on growth and sugar metabolism of wheat crop

Arbuscular mycorrhizae fungi (AMF) symbiosis is an indispensable approach in sustainable agriculture. AMF-plant association is likely to be enhanced by the nanoparticle's application. Herein, the impact of chitosan nanoparticles (CSNPs) on the mycorrhizal colonization in wheat has been investigated. The provoked changes in wheat growth, physiology and metabolism were assessed. CSNPs treatment improved AMF colonization (52 %) by inducing the levels of auxins and strigolactones in roots by 32 and 21 %, respectively besides flavonoids exudation into the rhizosphere (9 %). Such supporting action of CSNPs was associated with improved plant biomass production (21 %) compared to AMF treatment. Both treatments synergistically enhanced the photochemical efficiency of photosystem II and stomatal conductance, therefore the photosynthetic rate was increased. The combined application of CSNPs and AMF enhanced accumulation of glucose, fructose, sucrose, and starch (12, 22, 31 and 13 %, respectively), as well as the activities of sucrose-p-synthase, invertases and starch synthase compared to AMF treatment. The synchronous application of CSNPs and AMF promoted the levels of polyphenols, carotenoids, and tocopherols therefore, improved antioxidant capacity (33 %), in the roots. CSNPs can be applied as an efficient biofertilization strategies to enhance plant growth and fitness, beside improvement of health promoting compounds in wheat.

Association of Physcion and Chitosan Can Efficiently Control Powdery Mildew in Rosa roxburghii

Powdery mildew is an extremely serious disease of all Rosa roxburghii production regions in China and frequently causes 30~40% of economic losses. Natural products are considered excellent alternatives to chemical fungicides. In this work, we investigated the efficacy of physcion used together with chitosan controls R. roxburghii powdery mildew and impacts its resistance, growth, yield, and quality. The results reveal that the foliar application of 12.5 mg L−1 0.5% physcion aqueous solutions (AS) + 250 mg L−1 chitosan efficiently controlled powdery mildew with the efficacies of 92.65% and 90.68% after 7 d and 14 d, respectively, which conspicuously (p < 0.05) higher than 83.62% and 80.43% of 25 mg L−1 0.5% physcion AS, as well as 70.75% and 77.80% of 500 mg L−1 chitosan. Meanwhile, this association prominently ameliorated the resistant and photosynthetic capabilities of R. roxburghii. Simultaneously, this association was more efficient than physcion or chitosan alone for ameliorating the yield and quality of R. roxburghii. This work emphasizes that the association of physcion and chitosan can be nominated as a natural, efficient and environmental-friendly alternative ingredient in controlling R. roxburghii powdery mildew and ameliorating its resistant, photosynthesis, yield, and quality.

The Effect of Chitosan on Plant Physiology, Wound Response, and Fruit Quality of Tomato

In agriculture, chitosan has become popular as a metabolic enhancer; however, no deep information has been obtained yet regarding its mechanisms on vegetative tissues. This work was conducted to test the impact of chitosan applied at different plant growth stages on plant development, physiology, and response to wounding as well as fruit shape and composition. Five concentrations of chitosan were tested on tomato. The most effective chitosan doses that increased leaf number, leaf area, plant biomass, and stomatal conductance were 0.75 and 1 mg mL^-1. Chitosan (1 mg mL^-1) applied as foliar spray increased the levels of jasmonoyl-isoleucine and abscisic acid in wounded roots. The application of this dose at vegetative and flowering stages increased chlorophyll fluorescence (Fv/Fm) values, whereas application at the fruit maturation stage reduced the Fv/Fm values. This decline was positively correlated with fruit shape and negatively correlated with the pH and the content of soluble sugars, lycopene, total flavonoids, and nitrogen in fruits. Moreover, the levels of primary metabolites derived from glycolysis, such as inositol phosphate, lactic acid, and ascorbic acid, increased in response to treatment of plants with 1 mg mL^-1- chitosan. Thus, chitosan application affects various plant processes by influencing stomata aperture, cell division and expansion, fruit maturation, mineral assimilation, and defense responses.

Synthesis of Chitosan Microparticles Encapsulating Bacterial Cell-Free Supernatants and Indole Acetic Acid, and Their Effects on Germination and Seedling Growth in Tomato (Solanum lycopersicum)

Encapsulation of biostimulant metabolites has gained popularity as it increases their shelf life and improves their absorption, being considered a good alternative for the manufacture of products that stimulate plant growth and fruit production. Cell-free supernatants (CFS) were obtained from nine indole-3-acetic acid (IAA) producing bacterial strains. Stenotrophomonas maltophilia (PT53T) produced the highest concentration of IAA (15.88 μg/mL) after 48 h of incubation. CFS from this strain, as well as an IAA standard were separately encapsulated in chitosan microparticles (CS-MP) using the ionic gelation method. The CS-MP were analyzed by Fourier transform infrared spectroscopy (FTIR), showing absorption bands at 1641, 1547, and 1218 cm-1, associated with the vibrations of the carbonyl C=O, the N-H amine, and the bond between chitosan (CHI) and sodium tripolyphosphate (TPP). The effects of unencapsulated CFS, encapsulated CFS (EN-CFS), and encapsulated IAA standard (EN-IAA) on germination and growth of seven-day-old tomato (Solanum lycopersicum) seedlings were studied. Results showed that both EN-CFS and EN-IAA significantly (p < 0.05) increased seed germination rates by 77.5 and 80.8%, respectively. Both CFS and EN-IAA produced the greatest increase in aerial part length and fresh weight with respect to the treatment-free test. Therefore, it was concluded that the application of EN-CFS or EN-IAA could be a good option to improve the germination and growth of tomato seedlings.

Chitosan as an Adjuvant to Enhance the Control Efficacy of Low-Dosage Pyraclostrobin against Powdery Mildew of Rosa roxburghii and Improve Its Photosynthesis, Yield, and Quality

Powdery mildew is the most serious fungal disease of Rosa roxburghii in Guizhou Province, China. In this study, the control role of chitosan-assisted pyraclostrobin against powdery mildew of R. roxburghii and its influences on the resistance, photosynthesis, yield, quality and amino acids of R. roxburghii were evaluated. The results indicate that the foliar application of 30% pyraclostrobin suspension concentrate (SC) 100 mg L−1 + chitosan 500 mg L−1 displayed a superior control potential against powdery mildew, with a control efficacy of 89.30% and 94.58% after 7 d and 14 d of spraying, respectively, which significantly (p < 0.01) exceeded those of 30% pyraclostrobin SC 150 mg L−1, 30% pyraclostrobin SC 100 mg L−1, and chitosan 500 mg L−1. Simultaneously, their co-application could effectively enhance their effect on the resistance and photosynthesis of R. roxburghii leaves compared to their application alone. Meanwhile, their co-application could also more effectively enhance the yield, quality, and amino acids of R. roxburghii fruits compared to their application alone. This work highlights that chitosan can be applied as an effective adjuvant to promote the efficacy of low-dosage pyraclostrobin against powdery mildew in R. roxburghii and improve its resistance, photosynthesis, yield, quality, and amino acids.

Phytostimulants in sustainable agriculture

The consistent use of synthetic fertilizers and chemicals in traditional agriculture has not only compromised the fragile agroecosystems but has also adversely affected human, aquatic, and terrestrial life. The use of phytostimulants is an alternative eco-friendly approach that eliminates ecosystem disruption while maintaining agricultural productivity. Phytostimulants include living entities and materials, such as microorganisms and nanomaterials, which when applied to plants or to the rhizosphere, stimulate plant growth and induce tolerance to plants against biotic and abiotic stresses. In this review, we focus on plant growth-promoting rhizobacteria (PGPR), beneficial fungi, such as arbuscular mycorrhizal fungi (AMF) and plant growth-promoting fungi (PGPF), actinomycetes, cyanobacteria, azolla, and lichens, and their potential benefits in the crop improvement, and mitigation of abiotic and biotic stresses either alone or in combination. PGPR, AMF, and PGPF are plant beneficial microbes that can release phytohormones, such as indole acetic acid (IAA), gibberellic acid (GA), and cytokinins, promoting plant growth and improving soil health, and in addition, they also produce many secondary metabolites, antibiotics, and antioxidant compounds and help to combat biotic and abiotic stresses. Their ability to act as phytostimulator and a supplement of inorganic fertilizers is considered promising in practicing sustainable agriculture and organic farming. Glomalin is a proteinaceous product, produced by AMF, involved in soil aggregation and elevation of soil water holding capacity under stressed and unstressed conditions. The negative effects of continuous cropping can be mitigated by AMF biofertilization. The synergistic effects of PGPR and PGPF may be more effective. The mechanisms of control exercised by PGPF either direct or indirect to suppress plant diseases viz. by competing for space and nutrients, mycoparasitism, antibiosis, mycovirus-mediated cross-protection, and induced systemic resistance (ISR) have been discussed. The emerging role of cyanobacterial metabolites and the implication of nanofertilizers have been highlighted in sustainable agriculture.

Chitosan and chitosan-derived nanoparticles modulate enhanced immune response in tomato against bacterial wilt disease

The present study evaluated the priming efficacy of chitosan and chitosan-derived nanoparticles (CNPs) against bacterial wilt of tomato. In the current study, seed-treated CNPs plus pathogen-inoculated tomato seedlings recorded significant protection of 62 % against pathogen-induced wilt disease and subsequently better growth. The induced resistance was witnessed by a prominent increase in lignin, callose and H₂O₂ deposition, followed by superoxide radical accumulation in leaves. Additionally, chitosan and CNPs-treated tomato plants recorded a remarkable increase in the upregulation of phenylalanine ammonia-lyase (PAL), peroxidase (POX), polyphenol oxidase (PPO), catalase (CAT) and β-1, 3 glucanase (GLU) in comparison with untreated plants. The chitosan and CNPs-induced antioxidant enzymes were positively correlated with the stimulation of corresponding gene expression in CNPs treated plants related to pathogen-inoculated ones. The results of this study describe that how the application of chitosan and CNPs elicit defense responses at the cellular, biochemical and gene expression in tomato plants against bacterial wilt disease, thereby improve growth and yield.

Co-Application of Tetramycin and Chitosan in Controlling Leaf Spot Disease of Kiwifruit and Enhancing Its Resistance, Photosynthesis, Quality and Amino Acids

Leaf spot disease caused by Lasiodiplodia theobromae and Alternaria tenuissima is a seriously fungal disease in kiwifruit production. In this study, the co-application of tetramycin and chitosan against leaf spot disease in kiwifruit and its effects on the disease resistance, photosynthesis, quality and amino acids of kiwifruit were investigated. The results show that tetramycin exhibited an excellent antifungal activity against L. theobromae and A. tenuissima with EC50 values of 2.37 and 0.16 mg kg−1. In the field, the foliar co-application of tetramycin and chitosan could effectively control leaf spot disease with control efficacy of 89.44% by spraying 0.3% tetramycin aqueous solutions (AS) 5000 time liquid + chitosan 100 time liquid, which was significantly (ANOVA, p < 0.01) higher than 79.80% of 0.3% tetramycin AS 5000 time liquid and 56.61% of chitosan 100 time liquid. Simultaneously, the co-application of tetramycin and chitosan was more effective than tetramycin or chitosan alone in enhancing the disease resistance and photosynthesis of kiwifruit leaves, as well as improving the quality and amino acids of kiwifruit fruits. This work highlights that chitosan is a practicable, cost-effective and eco-friendly adjuvant of tetramycin for controlling leaf spot disease of kiwifruit, enhancing resistance and photosynthesis of leaves and improving quality and amino acids of fruits.

Improving growth and productivity of faba bean (Vicia faba L.) using chitosan, tryptophan, and potassium silicate anti-transpirants under different irrigation regimes

This work aims to study the effect of foliar spraying of three anti-transpirants i.e., A­₁: tryptophan (Tri), A₂: potassium silicate (KS), A₃: chitosan (Chi) as well as A₀: control (Tap water) under three irrigation regimes, I₁: 2400, I₂: 3600, and I₃: 4800 m³ha⁻¹ on the quality and production of faba bean crop and its nutrient contents. The study was carried out during two successive winter seasons of 2018/2019 and 2019/2020. Drought stress affected the average performance of all studied traits as it reduced seed yield and traits, as a result of the decrease in chlorophyll related to photosynthesis, protein, carbohydrates, total phenols, amino acids, macronutrients (N, P, and K), micronutrient contents (Fe, Mn, and Zn) and their absorption. The single foliar spraying of faba bean with tryptophan 75 ppm, potassium silicate at 100 ppm, or chitosan at 750 ppm significantly increased all studied traits and reduced the drought stress compared to control under different irrigation systems. We recommended using a foliar spray of chitosan (750 ppm) on faba bean plants under an irrigation level of 4800 m³ led to an improvement in the physiological properties of the plant, i.e., plant height, the number of branches/plants, and the number of plants, pods plant⁻¹, the number of seed pods⁻¹, the weight of 100 seeds and seed yield ha⁻¹ increased with relative increase about 42.29, 89.47, 28.85, 75.91, 24.43, and 306.48% compared to control. The quality properties also improved, as the total chlorophyll, protein, carbohydrates, total phenols, and amino acids were higher than the control with a relative increase of 63.83, 29.58, 27.72, 37.54, and 64.19%. Additionally, an increase in the contents and uptake of macronutrients (N, P, and K), and micronutrients (Fe, Mn, Zn) and their absorption. The increase was estimated with 29.41, 75.00, 16.56, 431.17, 630.48, 72.68%, 22.37, 35.69, 42.33, 397.63, 452.58, and 485.94% about the control. This was followed by potassium silicate (100 ppm), then tryptophan (75 ppm) compared to the control, which recorded the minimum values ​​in plant traits.

Co-Application of Allicin and Chitosan Increases Resistance of Rosa roxburghii against Powdery Mildew and Enhances Its Yield and Quality

Powdery mildew, caused by Sphaerotheca sp., annually causes severe losses in yield and quality in Rosa roxburghii production areas of southwest China. In this study, the role of the co-application of allicin and chitosan in the resistance of R. roxburghii against powdery mildew and its effects on growth, yield and quality of R. roxburghii were investigated. The laboratory toxicity test results show that allicin exhibited a superior antifungal activity against Sphaerotheca sp. with EC₅₀ value of 148.65 mg kg⁻¹. In the field, the foliar application of allicin could effectively enhance chitosan against powdery mildew with control efficacy of 85.97% by spraying 5% allicin microemulsion (ME) 100–time liquid + chitosan 100–time liquid, which was significantly (p < 0.01) higher than 76.70% of allicin, 70.93% of chitosan and 60.23% of polyoxin. The co-application of allicin and chitosan effectively enhanced the photosynthetic rate and chlorophyll of R. roxburghii compared with allicin, chitosan or polyoxin alone. Moreover, allicin used together with chitosan was more effective than allicin or chitosan alone in enhancing R. roxburghii plant growth and fruit yield as well as improving R. roxburghii fruit quality. This work highlights that the co-application of allicin and chitosan can be used as a green, cost-effective and environmentally friendly alternative strategy to conventional antibiotics for controlling powdery mildew of R. roxburghii.

Use of metabolomics data analysis to identify fruit quality markers enhanced by the application of an aminopolysaccharide

Chitosan is a biostimulator that has a great effect either on plant physiology, productivity, or fruit quality. However, the metabolic mechanism regulated by chitosan still remains unknown. Untargeted metabolomics analysis, using LC-MS/MS mass spectrometry, was used to investigate fruit quality markers. Thus, this study was focused on the identification of untargeted metabolites of tomato fruits produced under the application of five doses of chitosan at different concentrations (0, 0.25, 0.50, 0.75, and 1 mg ml-1) that was extracted from Parapenaeus longirostris shrimp shells. The identification was carried out using two ion modes (ESI-/ESI+), a web application "Metfamily" to analyze signals, and reference libraries. The analysis of data using partial least squares discriminant analysis (PLS-DA) and hierarchical cluster analysis (HCA) showed that chitosan application, especially 0.75 mg ml-1, had a clear and remarkable effect regarding the number of metabolite families identified in both ion modes. This treatment has increased the relative abundance of many metabolites that belong to anthocyanins decorated with sugars, terpenoids, phenylpropanoids, acylsugars, glucosinolates, folates, galactolipids, fatty acids, and phospholipids. Thus, these results showed that chitosan application increased the quality of tomato fruits due to its involvement in the regulation of many metabolic pathways that might be responsible for enhancing the nutritional characteristics as well as the defense of fruits.

Chitosan Can Induce Rosa roxburghii Tratt. against Sphaerotheca sp. and Enhance Its Resistance, Photosynthesis, Yield, and Quality

Powdery mildew caused by Sphaerotheca sp. is the most serious disease of Rosa roxburghii cultivation. In this study, the foliar application of chitosan induced Rosa roxburghii Tratt. against Sphaerotheca sp. and its effects on the disease resistance, growth, yield, and quality of R. roxburghii were investigated. The results show that the foliar application of 1.0%~1.5% chitosan could effectively control Sphaerotheca sp. of R. roxburghii with the inducing control efficacy of 69.30%~72.87%. The foliar application of 1.0%~1.5% chitosan significantly (p < 0.01) increased proline, soluble sugar, flavonoids, superoxide dismutase (SOD), and polyphenoloxidase (POD) activities of the R. roxburghii leaf and decreased its malonaldehyde (MDA), as well as reliably enhanced its photosynthetic rate and chlorophyll. Moreover, the foliar application of 1.0%~1.5% chitosan notably improved single fruit weight, yield, vitamin C, soluble solid, soluble sugar, total acidity, soluble protein, flavonoids, and SOD activity of R. roxburghii fruits. This study highlights that chitosan can be used as an ideal, efficient, safe, and economical inductor for controlling powdery mildew of R. Roxburgh and enhancing its resistance, growth, yield, and quality.

A Green Nanostructured Pesticide to Control Tomato Bacterial Speck Disease

Bacterial speck disease, caused by Pseudomonas syringae pv. tomato (Pst), is one of the most pervasive biological adversities in tomato cultivation, in both industrial and in table varieties. In this work synthesis, biochemical and antibacterial properties of a novel organic nanostructured pesticide composed of chitosan hydrochloride (CH) as active ingredient, cellulose nanocrystals (CNC) as nanocarriers and starch as excipient were evaluated. In order to study the possibility of delivering CH, the effects of two different types of starches, extracted from a high amylose bread wheat (high amylose starch-HA Starch) and from a control genotype (standard starch-St Starch), were investigated. Nanostructured microparticles (NMP) were obtained through the spray-drying technique, revealing a CH loading capacity proximal to 50%, with a CH release of 30% for CH-CNC-St Starch NMP and 50% for CH-CNC-HA Starch NMP after 24 h. Both NMP were able to inhibit bacterial growth in vitro when used at 1% w/v. Moreover, no negative effects on vegetative growth were recorded when NMP were foliar applied on tomato plants. Proposed nanostructured pesticides showed the capability of diminishing Pst epiphytical survival during time, decreasing disease incidence and severity (from 45% to 49%), with results comparable to one of the most used cupric salt (hydroxide), pointing out the potential use of CH-CNC-Starch NMP as a sustainable and innovative ally in Pst control strategies.

Sustainable Agriculture Systems in Vegetable Production Using Chitin and Chitosan as Plant Biostimulants

Chitin and chitosan are natural compounds that are biodegradable and nontoxic and have gained noticeable attention due to their effective contribution to increased yield and agro-environmental sustainability. Several effects have been reported for chitosan application in plants. Particularly, it can be used in plant defense systems against biological and environmental stress conditions and as a plant growth promoter—it can increase stomatal conductance and reduce transpiration or be applied as a coating material in seeds. Moreover, it can be effective in promoting chitinolytic microorganisms and prolonging storage life through post-harvest treatments, or benefit nutrient delivery to plants since it may prevent leaching and improve slow release of nutrients in fertilizers. Finally, it can remediate polluted soils through the removal of cationic and anionic heavy metals and the improvement of soil properties. On the other hand, chitin also has many beneficial effects such as plant growth promotion, improved plant nutrition and ability to modulate and improve plants’ resistance to abiotic and biotic stressors. The present review presents a literature overview regarding the effects of chitin, chitosan and derivatives on horticultural crops, highlighting their important role in modern sustainable crop production; the main limitations as well as the future prospects of applications of this particular biostimulant category are also presented.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.