Phosphorene Is the New Graphene in Biomedical Applications

Interplay between the oxidation process and cytotoxic effects of antimonene nanomaterials

Pnictogen nanomaterials have recently attracted researchers' attention owing to their promising properties in the field of electronic, energy storage, and nanomedicine applications. Moreover, especially in the case of heavy pnictogens, their chemistry allows for nanomaterial synthesis using both top-down and bottom-up approaches, yielding materials with remarkable differences in terms of morphology, size, yield, and properties. In this study, we carried out a comprehensive structural and spectroscopic characterization of antimony-based nanomaterials (Sb-nanomaterials) obtained by applying different production methodologies (bottom-up and top-down routes) and investigating the influence of the synthesis on their oxidation state and stability in a biological environment. Indeed, in situ XANES/EXAFS studies of Sb-nanomaterials incubated in cell culture media were carried out, unveiling a different oxidation behavior. Furthermore, we investigated the cytotoxic effects of Sb-nanomaterials on six different cell lines: two non-cancerous (FSK and HEK293) and four cancerous (HeLa, SKBR3, THP-1, and A549). The results reveal that hexagonal antimonene (Sb-H) synthesized using a colloidal approach oxidizes the most and faster in cell culture media compared to liquid phase exfoliated (LPE) antimonene, suffering acute degradation and anticipating well-differentiated toxicity from its peers. In addition, the study highlights the importance of the synthetic route for the Sb-nanomaterials as it was observed to influence the chemical evolution of Sb-H into toxic Sb oxide species, playing a critical role in its ability to rapidly eliminate tumor cells. These findings provide insights into the mechanisms underlying the dark cytotoxicity of Sb-H and other related Sb-nanomaterials, underlining the importance of developing therapies based on controlled and on-demand nanomaterial oxidation.

Recent Advances in Two-Dimensional Nanomaterials for Healthcare Monitoring

The development of advanced technologies for the fabrication of functional nanomaterials, nanostructures, and devices has facilitated the development of biosensors for analyses. Two-dimensional (2D) nanomaterials, with unique hierarchical structures, a high surface area, and the ability to be functionalized for target detection at the surface, exhibit high potential for biosensing applications. The electronic properties, mechanical flexibility, and optical, electrochemical, and physical properties of 2D nanomaterials can be easily modulated, enabling the construction of biosensing platforms for the detection of various analytes with targeted recognition, sensitivity, and selectivity. This review provides an overview of the recent advances in 2D nanomaterials and nanostructures used for biosensor and wearable-sensor development for healthcare and health-monitoring applications. Finally, the advantages of 2D-nanomaterial-based devices and several challenges in their optimal operation have been discussed to facilitate the development of smart high-performance biosensors in the future.

Implications of graphene-based materials in dentistry: present and future

Since the advent of nanoscience, nanobiomaterials have been applied in the dental industry. Graphene and its derivatives have attracted the most interest of all of them due to their exceptional look, biocompatibility, multiplication differential, and antibacterial capabilities. We outlined the most recent developments about their applications to dentistry in our review. There is discussion of the synthesis processes, architectures, and characteristics of materials based on graphene. The implications of graphene and its counterparts are then meticulously gathered and described. Finally, in an effort to inspire more excellent research, this paper explores the obstacles and potential of graphene-based nanomaterials for dental aspects.

Innovative Phosphorene Nanoplatform for Light Antimicrobial Therapy

Over the past few years, antibiotic resistance has reached global dimensions as a major threat to public health. Consequently, there is a pressing need to find effective alternative therapies and therapeutic agents to combat drug-resistant pathogens. Photodynamic therapy (PDT), largely employed as a clinical treatment for several malignant pathologies, has also gained importance as a promising antimicrobial approach. Antimicrobial PDT (aPDT) relies on the application of a photosensitizer able to produce singlet oxygen (1O2) or other cytotoxic reactive oxygen species (ROS) upon exposure to appropriate light, which leads to cell death after the induced photodamage. Among different types of 2D nanomaterials with antimicrobial properties, phosphorene, the exfoliated form of black phosphorus (bP), has the unique property intrinsic photoactivity exploitable for photothermal therapy (PTT) as well as for PDT against pathogenic bacteria.

Human Platelet-Rich Plasma Regulates Canine Mesenchymal Stem Cell Migration through Aquaporins

Platelet products are commonly used in regenerative medicine due to their effects on the acceleration and promotion of wound healing, reduction of bleeding, synthesis of new connective tissue, and revascularization. Furthermore, a novel approach for the treatment of damaged tissues, following trauma or other pathological damages, is represented by the use of mesenchymal stem cells (MSCs). In dogs, both platelet-rich plasma (PRP) and MSCs have been suggested to be promising options for subacute skin wounds. However, the collection of canine PRP is not always feasible. In this study, we investigated the effect of human PRP (hPRP) on canine MSCs (cMSCs). We isolated cMSCs and observed that hPRP did not modify the expression levels of the primary class of major histocompatibility complex genes. However, hPRP was able to increase cMSC viability and migration by at least 1.5-fold. hPRP treatment enhanced both Aquaporin (AQP) 1 and AQP5 protein levels, and their inhibition by tetraethylammonium chloride led to a reduction of PRP-induced migration of cMSCs. In conclusion, we have provided evidence that hPRP supports cMSC survival and may promote cell migration, at least through AQP activation. Thus, hPRP may be useful in canine tissue regeneration and repair, placing as a promising tool for veterinary therapeutic approaches.

Critical Overview on Regenerative Medicine: New Insights into the Role of Stem Cells and Innovative Biomaterials

Regenerative medicine represents a novel and intriguing field of medicine [...].

Regenerative Potential of Hydroxyapatite-Based Ceramic Biomaterial on Mandibular Cortical Bone: An In Vivo Study

Reconstruction of bone defects and maintaining the continuity of the mandible is still a challenge in the maxillofacial surgery. Nowadays, the biomedical research within bone defect treatment is focussed on the therapy of using innovative biomaterials with specific characteristics consisting of the body’s own substances. Hydroxyapatite ceramic scaffolds have fully acceptable phase compositions, microstructures and compressive strengths for their use in regenerative medicine. The innovative hydroxyapatite ceramics used by us were prepared using the tape-casting method, which allows variation in the shape of samples after packing hydroxyapatite paste to 3D-printed plastic form. The purpose of our qualitative study was to evaluate the regenerative potential of the innovative ceramic biomaterial prepared using this method in the therapy of the cortical bone of the lower jaw in four mature pigs. The mandible bone defects were evaluated after different periods of time (after 3, 4, 5 and 6 months) and compared with the control sample (healthy cortical bone from the opposite side of the mandible). The results of the morphological, clinical and radiological investigation and hardness examination confirmed the positive regenerative potential of ceramic implants after treatment of the mandible bone defects in the porcine mandible model.

Combination of Dental-Capping Agents with Low Level Laser Therapy Promotes Proliferation of Stem Cells from Apical Papilla

Background: Direct pulp capping is a vital pulp therapy, which stimulates differentiation of stem cells from apical papilla (SCAPs). SCAPs have multipotential capacity to differentiate into types of cells, contributing to the regeneration of tissues. Objective: Considering the promising effects of dental-capping materials, we aim to investigate the effect of dental dressing materials combined with laser therapy on the percentage of SCAP viability and the consequent dental regeneration capacity. Methods: We collected two immature third molar teeth and isolated SCAPs through collagenase type I enzymatic activity. Isolated SCAPs were then cultured with Dulbecco's modified Eagle's medium and α-minimum essential medium enriched with 15% and 10% fetal bovine serum, respectively. After reaching 70-80% confluency, cells were seeded in a 96-well plate and then treated with mineral trioxide aggregate (MTA), enamel matrix derivative (EMD), biodentine, and low level laser therapy (LLLT) alone and in combination for 24, 48, and 168 h. After that, cell survival rate was assessed using (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) (MTT) assay. Results: We found that combination of MTA, EMD, and LLLT as well as that of biodentine, EMD, and LLLT could lead to significant increase of SCAP viability as compared with other treatment groups. Combination of MTA and biodentine with EMD could also show increased level of SCAP proliferation and viability. However, MTA and biodentine alone reduced SCAP survival rate in all time points. Conclusions: Our conclusion is that LLLT can serve as an enhancer of SCAP proliferation and differentiation rate when added to dental-capping agents such as MTA, EMD, and biodentine. Thus, LLLT combination with effective capping materials will serve as a promising option for dental tissue repair.

Comparative in vitro study on biomechanical behavior of zirconia and polyetheretherketone biomaterials exposed to experimental loading conditions in a prototypal simulator

Zirconia and polyetheretherketone (PEEK) are two biomaterials widely investigated as substitute for metals in oral prosthetic rehabilitation. To achieve a proper biomechanical behavior, the prosthetic biomaterials must ensure a good resistance to loads, as this is a crucial characteristic enabling their use in dental applications. The aim of this study was to investigate differences in the fracture resistance of different biomaterials in an experimental environment: fixed partial dentures (FPDs) screwed in a prototype of biomimetic mandible. 10 Samples of FPDs were allocated in 2 groups (A and B): Group A (n=5) involved FPDs in zirconia-ceramic, and Group B (n=5) involved FPDs in PEEK-composite. The samples were loaded by means of a three-point bending mechanical test, and the load to fracture has been evaluated generating a point-by-point graphics (speed/load and time/deformation). The samples were further analyzed by micro-computed tomography (micro-CT) and described under experimental loading conditions. Zirconia-ceramic FDPs were the samples reporting the worst results, showing a lower value of vertical displacement with respect to PEEK-based samples. The micro-CT results have further confirmed the preliminary results previously described. This in vitro study aims to give analytic data on the reliability of PEEK as a reliable and strong biomaterial for prosthetic treatments.

Effects of Metformin Delivery via Biomaterials on Bone and Dental Tissue Engineering

Bone tissue engineering is a promising approach that uses seed-cell-scaffold drug delivery systems to reconstruct bone defects caused by trauma, tumors, or other diseases (e.g., periodontitis). Metformin, a widely used medication for type II diabetes, has the ability to enhance osteogenesis and angiogenesis by promoting cell migration and differentiation. Metformin promotes osteogenic differentiation, mineralization, and bone defect regeneration via activation of the AMP-activated kinase (AMPK) signaling pathway. Bone tissue engineering depends highly on vascular networks for adequate oxygen and nutrition supply. Metformin also enhances vascular differentiation via the AMPK/mechanistic target of the rapamycin kinase (mTOR)/NLR family pyrin domain containing the 3 (NLRP3) inflammasome signaling axis. This is the first review article on the effects of metformin on stem cells and bone tissue engineering. In this paper, we review the cutting-edge research on the effects of metformin on bone tissue engineering. This includes metformin delivery via tissue engineering scaffolds, metformin-induced enhancement of various types of stem cells, and metformin-induced promotion of osteogenesis, angiogenesis, and its regulatory pathways. In addition, the dental, craniofacial, and orthopedic applications of metformin in bone repair and regeneration are also discussed.

An innovative additively manufactured implant for mandibular injuries: Design and preparation processes based on simulation model

Objective: For mandibular injury, how to utilize 3D implants with novel structures to promote the reconstruction of large mandibular bone defect is the major focus of clinical and basic research. This study proposed a novel 3D titanium lattice-like implant for mandibular injuries based on simulation model, which is designed and optimized by a biomechanical/mechanobiological approach, and the working framework for optimal design and preparation processes of the implant has been validated to tailored to specific patient biomechanical, physiological and clinical requirements. Methods: This objective has been achieved by matching and assembling different morphologies of a lattice-like implant mimicking cancellous and cortical bone morphologies and properties, namely, an internal spongy trabecular-like structure that can be filled with bone graft materials and an external grid-like structure that can ensure the mechanical bearing capacity. Finite element analysis has been applied to evaluate the stress/strain distribution of the implant and bone graft materials under physiological loading conditions to determine whether and where the implant needs to be optimized. A topological optimization approach was employed to improve biomechanical and mechanobiological properties by adjusting the overall/local structural design of the implant. Results: The computational results demonstrated that, on average, values of the maximum von-Mises stress in the implant model nodes could be decreased by 43.14% and that the percentage of optimal physiological strains in the bone graft materials can be increased from 35.79 to 93.36% since early regeneration stages. Metal additive manufacturing technology was adopted to prepare the 3D lattice-like implant to verify its feasibility for fabrication. Following the working framework proposed in this study, the well-designed customized implants have both excellent biomechanical and mechanobiological properties, avoiding mechanical failure and providing sufficient biomechanical stimuli to promote new bone regeneration. Conclusion: This study is expected to provide a scientific and feasible clinical strategy for repairing large injuries of mandibular bone defects by offering new insights into design criteria for regenerative implants.

Facile Synthesis of Black Phosphorus Nanosheet@NaReF4 Nanocomposites for Potential Bioimaging

Black phosphorus nanomaterials (BPN) have been well developed in tumor therapy. However, lack of diagnostic function limits the development of BPN in biomedicine. Lanthanide-doped nanoparticles are considered as versatile materials for fluorescence or magnetic resonance imaging. Integration of BPN with lanthanide-doped nanoparticles was rarely reported owing to the complex synthesis processes and poor modification effect. Herein, we report a simple and general method for synthesizing BPN@NaReF₄ (Re: Gd or Y, Yb, Er) nanocomposite. TEM and XRD characterization confirm efficient combination of BPN and NaGdF₄ or NaYF₄:Yb,Er (18.2 mol %) after one-step mixing. The FTIR and XPS spectra were used to prove the generation of PO₄^3--Gd and P-Gd coordination bonds and clarify ligand exchange mechanism. The anchored nanoparticles on BPN were stable and become hydrophilic. The prepared BPN@NaGdF₄ exhibit the signals of photoacoustic and magnetic resonance imaging. The obtained BPN@NaYF₄:Yb,Er (18.2 mol %) have the potential in fluorescence bioimaging. We believe that this work will expand the applications of BPN in diagnosis and therapy together.

The Four Pillars for Successful Regenerative Therapy in Endodontics: Stem Cells, Biomaterials, Growth Factors, and Their Synergistic Interactions

Endodontics has made significant progress in regenerative approaches in recent years, thanks to advances in biologically based procedures or regenerative endodontic therapy (RET). In recent years, our profession has witnessed a clear conceptual shift in this therapy. RET was initially based on a blood clot induced by apical bleeding without harvesting the patient’s cells or cell-free RET. Later, the RET encompassed the three principles of tissue engineering, stromal/stem cells, scaffolds, and growth factors, aiming for the regeneration of a functional dentin pulp complex. The regenerated dental pulp will recover the protective mechanisms including innate immunity, tertiary dentin formation, and pain sensitivity. This comprehensive review covers the basic knowledge and practical information for translational applications of stem cell-based RET and tissue engineering procedures for the regeneration of dental pulp. It will also provide overall information on the emerging technologies in biological and synthetic matrices, biomaterials, and signaling molecules, recent advances in stem cell therapy, and updated experimental results. This review brings useful and timely clinical evidence for practitioners to understand the challenges faced for a successful cell-based RET and the importance of preserving or reestablishing tooth vitality. The clinical translation of these current bioengineering approaches will undoubtedly be beneficial to the future practice of endodontics.

Antibiotic Abuse and Antimicrobial Resistance in Hospital Environment: A Retrospective Observational Comparative Study

Background and Objectives: Antimicrobial resistance represents a serious problem, and it may be life-threatening in the case of severe hospital-acquired infections (HAI). Antibiotic abuse and multidrug resistance (MDR) have significantly increased this burden in the last decades. The aim of this study was to investigate the distribution and susceptibility rates of five selected bacterial species (E. coli, K. pneumoniae, P. aeruginosa, S. aureus and E. faecium) in two healthcare settings located in the Apulia region (Italy). Materials and Methods: Setting n.1 was a university hospital and setting n.2 was a research institute working on oncological patients. All the enrolled patients were diagnosed for bacterial HAI. The observation period was between August and September 2021. Clinical samples were obtained from several biological sources, in different hospital wards. Bacterial identification and susceptibility were tested by using the software VITEC 2 Single system. Results: In this study, a higher incidence of multi-drug-resistant K. pneumoniae was reported (42,2% in setting n.1 and 50% in setting n.2), with respect to the Italian 2019 statistics report (30.3%). All the isolates of E. faecium and S. aureus were susceptible to linezolid. All the bacterial isolates of P. aeruginosa and most of K. pneumoniae were susceptible to ceftazidime–avibactam. Amikacin and nitrofurantoin represented a good option for treating E. coli infections. Multidrug-resistant (MDR) P. aeruginosa, methicillin-resistant S. aureus (MRSA) and vancomycin-resistantE. faecium (VRE) had a lower incidence in the clinical setting, with respect to E. coli and K. pneumoniae. Conclusions: The data obtained in this study can support clinicians towards a rational and safe use of antibiotics for treating the infections caused by these resistant strains, to enhance the overall efficacy of the current antibiotic protocols used in the main healthcare environments.

Differences in Supragingival Microbiome in Patients with and without Full-Crown Prostheses

Objectives: To characterize the microflora profile of supragingival biofilm in patients with and without full-crown prostheses. Methods: Plaque samples of full-crown prostheses and teeth in patients with porcelain-fused-to-metal crowns, all-ceramic crowns, and no prostheses were collected (three patients per group), using 16S rRNA high-throughput sequencing technology to conduct DNA sequencing on the samples and using Qiime, R, and PICRUSt2 software to perform bioinformatics analyses and functional analyses on sequencing data. Results: In total, 110,209 valid sequences were obtained in the experiment, corresponding to 11 phyla and 120 genera. The predominant species shared by the three groups were phyla Actinobacteria, Bacteroidetes, Firmicutes, Fusobacteria, and Proteobacteria and genera Rothia, Porphyromonas, Prevotella, Streptococcus, Veillonella, Leptotrichia, Neisseria, Citrobacter, and Pseudomonas. The species-difference analysis showed that genus Hameophilus significantly increased after the patient wore the dental prosthesis. Compared with the no-prosthesis samples, the functional analysis showed that cell motility increased in the samples from full-crown prostheses, while replication and repair, and translation decreased. Conclusions: This study reveals the changes in the oral microbial community of patients with full-crown prostheses, which could provide insights regarding the safety of materials for long-term use in the oral cavity.

Numerical Modeling of a New Type of Prosthetic Restoration for Non-Carious Cervical Lesions

The paper considers a new technology for the treatment of non-carious cervical lesions (NCCLs). The three parameterized numerical models of teeth are constructed: without defect, with a V-shaped defect, and after treatment. A new treatment for NCCL has been proposed. Tooth tissues near the NCCLs are subject to degradation. The main idea of the technology is to increase the cavity for the restoration of NCCLs with removal of the affected tissues. The new treatment method also allows the creation of a playground for attaching the gingival margin. The impact of three biomaterials as restorations is studied: CEREC Blocs; Herculite XRV; and Charisma. The models are deformed by a vertical load from the antagonist tooth from 100 to 1000 N. The tooth-inlay system is considered, taking into account the contact interaction. Qualitative patterns of tooth deformation before and after restoration were established for three variants of the inlay material.

Effect Of Nano-Bioactive Glass On Flexural Strength And Antimicrobial Activity Of Resin-Modified Glass Ionomer Cement Containing 58S Nano-Bioactive Glass

Introduction:

Bioactive glass (BAG) is increasingly used in dentistry, aiming to provide superior mechanical properties, optimal chemical stability, and favorable antimicrobial activity in the oral environment. This study aimed to measure the flexural strength (FS) and antimicrobial activity of resin-modified glass ionomer (RMGI) cement containing 58S nano-BAG.

Materials and Methods:

In this in vitro study, 0wt (Weight) %, 10wt%, 20wt%, and 30wt% 58S nano-BAG particles were added to RMGI powder in groups 1 to 4, respectively (n=10). Forty specimens were fabricated in metal molds (2 x 25 x 2 mm), and their FS was measured by using a three-point bending test at a crosshead speed of 0.5 mm/min. The antibacterial activity of the materials against Streptococcus mutants was assessed by the disc diffusion test. In addition to the abovementioned experimental groups, one control group (n=10) containing 100% BAG was also considered. Data were analyzed by one-way ANOVA and Tukey’s test.

Results:

The mean (± standard deviation) FS was 38.71±8.84, 43.61±17.34, 45.62±15.89, and 54.71±14.25 MPa in groups 1 to 4, respectively. No significant difference was noted in FS among the groups (P=0.06). A significant difference was found in the diameter of the growth inhibition zone among the groups (P<0.05), and group 4 containing 30wt% BAG showed minimal bacterial growth.

Conclusion:

The addition of 10wt%, 20wt% and 30wt% nano-BAG to RMGI powder did not significantly change the FS but the addition of 30wt% nano-BAG to RMGI significantly inhibited the bacterial growth.

Does the Application of Additional Hydrophobic Resin to Universal Adhesives Increase Bonding Longevity of Eroded Dentin?

This paper evaluates the effect of an additional hydrophobic resin coat (extra HL) associated with universal adhesives on sound and eroded dentin and evaluated immediately or after 2 years of water storage to improve the microtensile bond strength (μTBS) and nanoleakage (NL) when compared to the use of universal adhesives only. Sixty-four molars were assigned to eight groups using the following combinations: 1. dentin substrate, including sound and eroded dentin; 2. treatment, including the control and extra HL and storage time (immediately and after two-years of storage). Two universal adhesives (Prime & Bond Active or Scotchbond Universal) were evaluated. Before restoration, half of the teeth were subjected to soft-drink erosion. Composite buildups were bonded; specimens were stored (37 °C/24 h), sectioned into resin−dentin bonded sticks and tested for microtensile bond strength and nanoleakage using SEM (immediately and after two-years of storage). Three-way ANOVA and Tukey’s test (α = 0.05%) were used. In the immediate testing, the application of extra HL did not increase microtensile bond strength values compared with the control group in either substrate (p > 0.05). However, extra HL significantly decreased nanoleakage values when applied to eroded and sound dentin (p = 0.0001). After two years, the application of extra HL produced significantly higher microtensile bond strength and lower nanoleakage values than the control group for both adhesives (p = 0.0001). In all cases, sound dentin showed higher microtensile bond strength and lower nanoleakage values than eroded dentin (p = 0.000001). An extra HL increased the bond strength and reduced nanoleakage in eroded dentin after two-years of storage.

Microvesicles Derived from Human Umbilical Cord Mesenchymal Stem Cells Enhance Alveolar Type II Cell Proliferation and Attenuate Lung Inflammation in a Rat Model of Bronchopulmonary Dysplasia

Although it is known that exosomes derived from human umbilical cord mesenchymal stem cells (hUCMSCs) alleviate hyperoxic lung injury of bronchopulmonary dysplasia (BPD) in animal models, the role of microvesicles (MVs) derived from hUCMSCs in BPD is poorly defined. Furthermore, antenatal inflammation has been linked to high risk of BPD in preterm infants. The purpose of this study was to explore whether MVs derived from hUCMSCs can preserve lung structure and function in an antenatal lipopolysaccharide- (LPS-) induced BPD rat model and to clarify the underlying mechanism. We demonstrate that antenatal LPS induced alveolar simplification, altered lung function, and dysregulated pulmonary vasculature, which restored by hUCMSCs and MVs treatment. Furthermore, MVs were large vesicles with a diameter of 100-900 nanometers and mostly uptaken by alveolar epithelial type II cells (AT2) and macrophages. Compared with the LPS-exposed group, MVs restored the AT2 cell number and SP-C expression in vivo and promoted the proliferation of AT2 cells in vitro. MVs also restored the level of IL-6 and IL-10 in lung homogenate. Additionally, PTEN/AKT and MAPK pathways were associated with the protection of MVs. Taken together, this study suggests MVs derived from hUCMSCs improve lung architecture and function in an antenatal LPS-induced BPD rat model by promoting AT2 cell proliferation and attenuating lung inflammation; thus, MVs provide a promising therapeutic vehicle for BPD treatment.

Study on Exosomes Promoting the Osteogenic Differentiation of ADSCs in Graphene Porous Titanium Alloy Scaffolds

Titanium and titanium alloys (Ti₆Al₄V and Ti) have been widely used in bone tissue engineering to repair maxillofacial bone defects caused by traumas and tumors. However, such materials are also bio-inert, which does not match the elastic modulus of bone. Therefore, different surface modifications have been proposed for clinical application. Based on the use of traditional titanium alloy in the field of bone repair defects, we prepared a compound Gr-Ti scaffold with ADSC-derived Exos. The results showed that Gr-Ti scaffolds have low toxicity and good biocompatibility, which can promote the adhesion and osteogenic differentiation of ADSCs. Exos played a role in promoting osteogenic differentiation of ADSCs: the mRNA levels of RUNX2, ALP, and Osterix in the Gr-Ti/Exos group were significantly higher than those in the Gr-Ti group, which process related to the Wnt signaling pathway. Gr-Ti scaffolds with ADSCs and ADSC-derived Exos successfully repaired rabbit mandibular defects. The bone mineral density and the bending strength of the Gr-Ti/Exos group was significantly higher than that of the Gr-Ti group. This study provides a theoretical basis for the research and development of new clinical bone repair materials.

Engineering of 2D nanomaterials to trap and kill SARS-CoV-2: a new insight from multi-microsecond atomistic simulations

In late 2019, coronavirus disease 2019 (COVID-19) was caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Spike protein is one of the surface proteins of SARS-CoV-2 that is essential for its infectious function. Therefore, it received lots of attention for the preparation of antiviral drugs, vaccines, and diagnostic tools. In the current study, we use computational methods of chemistry and biology to study the interaction between spike protein and its receptor in the body, angiotensin-I-converting enzyme-2 (ACE2). Additionally, the possible interaction of two-dimensional (2D) nanomaterials, including graphene, bismuthene, phosphorene, p-doped graphene, and functionalized p-doped graphene, with spike protein is investigated. The functionalized p-doped graphene nanomaterials were found to interfere with spike protein better than the other tested nanomaterials. In addition, the interaction of the proposed nanomaterials with the main protease (Mpro) of SARS-CoV-2 was studied. Functionalized p-doped graphene nanomaterials showed more capacity to prevent the activity of Mpro. These 2D nanomaterials efficiently reduce the transmissibility and infectivity of SARS-CoV-2 by both the deformation of the spike protein and inhibiting the Mpro. The results suggest the potential use of 2D nanomaterials in a variety of prophylactic approaches, such as masks or surface coatings, and would deserve further studies in the coming years.

Surface Characteristics of High Translucent Multilayered Dental Zirconia Related to Aging

(1) Background: The purpose of this study was to evaluate the differences in terms of surface characteristics (roughness, topography, microhardness) among layers for multi-layered high translucent and super-high translucent zirconia and the influence of finishing and aging on surface characteristics and microstructure. (2) Methods: Three types of translucent multilayer zirconia were evaluated: STML (4Y-TZP); IPS e.maxZirCAD CEREC/in Lab MT Multi (4Y-TZP + 5Y-TZP); CeramillZolidfx ML (5Y-TZP). Ninety-six plate-shaped samples (32 for a material), 16 mm × 14 mm × 1 mm size, were cut with a precision disc, polished on both sides with sand papers and sintered respecting the manufacturer’s protocol. Half of the specimens (16) were finished by polishing and the other half by glazing and then equally divided into one control group and one group subject to aging by autoclaving (1 h, 134 °C, 0.2 MPa), resulting in four groups of eight samples, for each zirconia. The specimens were evaluated in three areas: cervical, medium, incisal-of each glazed or polished surface, before and after aging. Tests were performed to determine the surface roughness using a profilometer; the surface topography by an atomic force microscope (AFM) and a scanning electron microscope (SEM). Microhardness was recorded using a microhardness tester. Statistical analyses were performed using two-way ANOVA test, unpaired sample t-Test, paired sample t-Test (α = 0.05) and Pearson’s correlation. (3) Results: Before and after autoclaving, for glazed samples significance (p < 0.05) higher surface roughness, respectively lower microhardness in comparison with the polished group was assessed. No significant differences (p > 0.05) were reported between the three areas, on glazed or polished surfaces of a material. Although, after aging an increase in surface roughness was observed both on glazed and polished samples, statistical differences were found for STML (p < 0.05). No significant differences (p> 0.05) concerning microhardness among the same areas, on glazed and polished surfaces, recorded before and after aging, except CeramillZolidfx ML glazed samples. (4) Conclusions: For tested zirconia materials no significant differences among layers were registered regarding surface characteristics. Surface treatment (glazing or polishing) has a significant impact on surface roughness and microhardness. Both before and after aging, the surface roughness values for the glazed samples were higher than for those polished. The super translucent 4Y-TZP material was more affected by aging compared to the super-high translucent 5Y-TZP material. The combined material revealed similarities for each layer corresponding to the microstructure.

The Dental-BIOfilm Detection TECHnique (D-BioTECH): A Proof of Concept of a Patient-Based Oral Hygiene

To date, no strong long-term data have been reported about new innovative clinical protocols to manage oral hygiene. An improper management of oral hygiene may lead to an increase in dental implant failure, and to an increase in infective complications in prosthetic rehabilitation. Personalized techniques are strongly required in dentistry and dental hygiene. A customized and personalized approach to oral hygiene is crucial in ensuring not only effective treatment, but also a careful analysis of the general health status of the patient involved in the therapeutic process. D-BioTECH is an acronym for Dental BIOfilm Detection Technique: it is based on a tailored approach to patients, ensuring that the operator actively interacts with the patient and their specific needs, especially during the domiciliary therapy. D-BioTECH is an approach to preventive care: in D-BioTECH, both dental hygienists and dentists play a central role. The use of a personalized approach to oral hygiene is the first step towards increasing implant and prosthesis survival rate; moreover, personalized medicine is strategic for managing and preventing the biological complications associated with several dental risk factors.

Vaccine Efficacy Denial: A Growing Concern Affecting Modern Science, and Impacting Public Health

BACKGROUND

The discovery of the vaccination technique has been revealed by Edward Jenner in 1796: undoubtedly, it represents the first scientific attempt to control an infectious disease by vaccines, followed by other important studies carried out by Pasteur and Koch, and Sabin, who developed the first technique to attenuate the virus. In recent decades, numerous scholars have begun to create dangerous theories against the effectiveness of vaccines through scientifically invalid or fraudulent studies.

AIM

This critical review of the literature aims to analyse the main factors that have undermined the credibility of vaccines in the general population, to disprove false information and, on the other hand, emphasize the benefits of vaccines over the last 200 years.

DISCUSSIONS

Unfortunately, several studies have been carried out without the proper scientific rigour. The most impacting example is the study published by Andrew Wakefield in the Lancet journal that tried to correlate vaccines with the development of autism: this publication was withdrawn from the journal a few years after its publication, but the impact of incorrect scientific studies, fake news, and ambiguous healthcare policies has led to an adverse general opinion about the effectiveness of vaccines.

CONCLUSION

The excess of uncontrolled information is a serious concerning in the Coronavirus pandemic. The modern science must tackle this problem with a better willingness to communicate even the clinical studies to those people not able to understand the medical information autonomously. Nevertheless, a reliable science must also limit the dissemination of studies that do not meet the basic criteria of a methodological rigor and certainty of results, in order not to feed confusion in the scientific community.

Graphene-Based Nanomaterials for Dental Applications: Principles, Current Advances, and Future Outlook

With the development of nanotechnology, nanomaterials have been used in dental fields over the past years. Among them, graphene and its derivatives have attracted great attentions, owing to their excellent physicochemical property, morphology, biocompatibility, multi-differentiation activity, and antimicrobial activity. In our review, we summarized the recent progress about their applications on the dentistry. The synthesis methods, structures, and properties of graphene-based materials are discussed. Then, the dental applications of graphene-based materials are emphatically collected and described. Finally, the challenges and outlooks of graphene-based nanomaterials on the dental applications are discussed in this paper, aiming at inspiring more excellent studies.

Periodontal Tissue Reaction Consecutive Implantation of Endodontic Materials and Subsequent Integration of Complex Oral Rehabilitation Treatments

Oral rehabilitation is a main branch of dentistry focused on diagnosing the patient’s problem and creating a treatment plan to restore aesthetics, recondition morphologically all components, and recover the functionality of the oral cavity. Biological compatibility of the materials used has a major importance, due to the direct contact with essential tissues, such as the soft and hard tissue of the periodontium and the potential influence on the outcome of the treatment. The present material aims to assess the inflammatory response after subcutaneous implantation of three materials frequently used in endodontics (Mineral Trioxide Aggregate—MTA, DiaRoot BioAggregate, and Sealapex). The evaluation of the reparative tissue reaction after 7, 30, and 60 days, respectively, subsequent to in vivo implantation, was carried out through electron microscopy imaging. Moreover, evaluation of the dynamics of the osteogenesis process was an indicator for the maintenance of internal homeostasis in the context of complex intraoral rehabilitation treatments that include fixed prosthodontics correlated with the particular periodontal-aesthetic aspects and completed by cranio-mandibular repositioning. Our study showed increased absolute values of alkaline phosphatase in all material-implanted cases (more pronounced in MTA and Bio Aggregate), highlighting that this enzyme could be an effective indicator of bone formation, which takes place after the material implantation, with the most significant elevated values at 30 days postoperatively.

Molecular Modelling of Optical Biosensor Phosphorene-Thioguanine for Optimal Drug Delivery in Leukemia Treatment

Thioguanine is an anti-cancer drug used for the treatment of leukemia. However, thioguanine has weak aqueous solubility and low biocompatibility, which limits its performance in the treatment of cancer. In the present work, these inadequacies were targeted using density functional theory-based simulations. Three stable configurations were obtained for the adsorption of thioguanine molecules on the phosphorene surface, with adsorption energies in the range of -76.99 to -38.69 kJ/mol, indicating physisorption of the drug on the phosphorene surface. The calculated bandgap energies of the individual and combined geometries of phosphorene and thioguanine were 0.97 eV, 2.81 eV and 0.91 eV, respectively. Owing to the physisorption of the drug molecule on the phosphorene surface, the bandgap energy of the material had a direct impact on optical conductivity, which was significantly altered. All parameters that determine the potential ability for drug delivery were calculated, such as the dipole moment, chemical hardness, chemical softness, chemical potential, and electrophilicity index. The higher dipole moment (1.74 D) of the phosphorene-thioguanine complex reflects its higher biodegradability, with no adverse physiological effects.

Potential impact of functional biomolecules-enriched foods on human health: A randomized controlled clinical trial

Naturally occurring milk compounds have recently been investigated for their health-promoting properties; in fact, their anti-microbial, immuno-modulatory, antioxidant and anti-thrombotic activities, have increasingly gained interest within the scientific community. We have reported a translational, randomized, controlled clinical trial (RCT) on human subjects with a moderate to high cardiovascular risk, and a body mass index (BMI) >25.1 kg/m2, to evaluate the clinical impact of biomolecules-enriched Mediterranean Buffalo (Bubalus bubalis) milk and its derived dairy foods, produced with innovative breeding techniques. The experimental arm involved patients that followed a diet including the above-described products (treated group; n= 11); the control arm was based on a diet including cow milk and its dairy products (control group; n= 9). The results of this study have been statistically evaluated, pointing out a specific significance related to the comparative analysis of the blood pressure among the 2 arms; in fact, this value showed a significant improvement in an extremely short experimental time. Nevertheless, this study also reported not-significant results that were indicative of an interesting and promising tendency in modulating specific diet-depending haematological and biomedical values. In conclusion, this RCT has assessed that the foods derived from buffalo milk naturally enriched with biomolecules, was able to improve the overall blood glucose levels, the BMI and the body weight. These preliminary results are suitable for the design of future strategies in the prevention of cardiometabolic diseases, thus improving the overall quality of life and the policies of healthcare management.

Rehabilitation of the Completely Edentulous Mandible by All-on-Four Treatment Concept: A Retrospective Cohort Study with Up to 10 Years Follow-Up

(1) Background and Objectives. Currently, there are no definitive long-term data about clinically significant difference in the failure of prosthesis and implant or marginal bone loss related to the rehabilitation of the completely edentulous mandible by all-on-four treatment concept. The main aim of present investigation was to report the long-term outcomes (10-years follow-up) of complete-arch mandibular rehabilitations based on the all-on-four concept. (2) Materials and Methods. Patients in need of extractions of teeth due to the occurrence of caries and/or severe periodontal disease and patients presented with edentulous mandibles were enrolled to the study. A total of 96 participants (mean follow-up period after intervention of 3185.2 days) were enrolled in the study. Participants were evaluated at the first visit, 10 days after intervention and every year after the intervention. Implant and prosthesis survival, bone loss and both local biological and mechanical complications were evaluated during the follow-up period. (3) Results. An implants’ survival rate of 97.9% was observed at the end of the follow-up period. Biological complications were reported in 19.8% of patients, whereas mechanical complications were reported in 27.1% of cases. The average marginal bone level at baseline was −0.03 mm. A significant marginal bone loss was observed after 10-years follow-up (2.5 mm). Binary logistic regression analysis showed significant association between smoke and both marginal bone loss and local biological complications. Lastly, a significant association was observed between bruxism and mechanical complications. (4) Conclusions. The high implant and prosthesis survival rate and the moderate incidence of biological and mechanical complications observed in present investigation can be associated to several factors such as high implant primary stability, prosthetic design, and control of the occlusal forces.

Preparation, Characterization, and Biocompatibility Assessment of Polymer-Ceramic Composites Loaded with Salvia officinalis Extract

In the present work, hydroxyapatite-polymer materials were developed. The preparation, as well as characterization of the ceramic-polymer composites based on polyvinylpyrrolidone, sodium alginate, and gelatin were described. The system was enriched with the addition of common sage extract (Salvia officinalis). The antioxidant potential of sage aqueous extract and total polyphenol content was determined. The antioxidant capacity and total phenolic content of extract were equal to 86.06 ± 0.49% and 16.21 ± 0.58 mg gallic acid equivalents per gram of dry weight, respectively. Incubation studies in selected biological liquids were carried out to determine the biomineralization capacity on the surface of the composites and to examine the kinetics of release of the active substances from within the material. As a result of the incubation, a gradual release of the extract over time from the polymer matrix was observed; moreover, the appearance of new apatite layers on the composite surface was recorded as early as after 14 days, which was also confirmed by energy-dispersive X-ray spectroscopy (EDS) microanalysis. The composites were analyzed with Fourier transform infrared spectroscopy (FTIR) spectroscopy, and the morphology was recorded by scanning electron microscope (SEM) imaging. The in vitro biological studies allowed their cytotoxic effect on the reference L929 fibroblasts to be excluded. Further analysis of the biomaterials showed that enrichment with polyphenols does not support the adhesion of L929 cells to the surface of the material. However, the addition of these natural components stimulates human monocytes that constitute the first step of tissue regeneration.

Phosphorene and phosphorene oxides as a toxic gas sensor materials: a theoretical study

A systematic study of the adsorption of several harmful gases (CO₂, NO, SO₂, NH₃y H₂S) onto black phosphorene and three different black phosphorene oxides (BPO) is carried out through density functional theory calculations. In general, it is shown that BPOs are more suitable adsorbents than pure black phosphorene. Smaller values of adsorption energy correspond to CO₂molecules, whilst those exhibiting larger ones are NH₃, H₂S, NO y SO₂. It is found that SO₂shows the greater difference in electronic charge transfer as well as the longer time of recovery among all species, being an electron acceptor molecule. Besides, it is revealed that physisorption induces changes of different order in the electronic, magnetic and optical responses of phosphorene systems involved. Greater changes in the electronic structure are produced in the case of NO adsorption. In that case, semiconductor nature and magnetization features of black phosphorene band structure become significantly modified. Moreover, a notorious effect of an externally applied electric field on the molecule adsorption onto BPOs has been detected. In accordance, adsorption energy changes with the applied electric field direction, in such a way that the higher value is favored through an upwards-directed orientation of NO y SO₂adsorbates. Results presented could help to enhancing the understanding of BPOs as possible candidates for applications in gas sensing.

Black Phosphorus Nanostructure Based Highly Sensitive and Selective Surface Plasmon Resonance Sensor for Biological and Chemical Sensing: A Review

Surface plasmon resonance (SPR) is an attention-grabbing sensor type, which offers the sensitive and selective detection of biomolecules and environmentally toxic substances. Notably, the SPR sensor gives excellent rewards including real-time, in-situ, and label-free measuring capability as compared to existing sensing technologies. As a result, these noteworthy merits of the SPR sensor make it straightforward to investigate the molecular events and chemical/gas molecule interaction. Unfortunately, there are different binding events including smaller molecular mass substances, which cannot be detected at the SPR sensor. Accordingly, this downside of the SPR sensor eventually led to the design and implementation of new approaches for sensitivity and selectivity improvement for sensing applications in different fields. Recently, the black phosphorus (BP) derived 2 D nanomaterial is stand out as a distinctive nanostructure in comparison to recently reported other 2 D nanomaterials. Substantial and functional characteristics of BP including simplicity of operation, optical properties, high carrier mobility, stronger immobilization of receptors and biomolecules, electronic bridging playing important role in the highly selective and sensitive assessment of analyte. The designed BP nanostructures are mostly serving to accelerate the plasmon material signals followed by improved molecular sensing that may due to 40-times faster-sensing responses of BP nanostructure than reported 2 D nanomaterials. Therefore, the present review article sheds light on the latest significant advances in biological and toxic gas detection through 2D BP nanostructures based SPR sensors. In the future, this review will facilitate detailed insights into the development of BP-based groundbreaking frameworks for highly sensitive and selective recognition of biomolecules and environmental pollutants.

Human Chondrocytes from Human Adipose Tissue-Derived Mesenchymal Stem Cells Seeded on a Dermal-Derived Collagen Matrix Sheet: Our Preliminary Results for a Ready to Go Biotechnological Cartilage Graft in Clinical Practice

Background

The articular cartilage is unique in that it contains only a single type of cell and shows poor ability for spontaneous healing. Cartilage tissue engineering which uses mesenchymal stem cells (MSCs) and adipose tissue-derived mesenchymal stem cells (AT-MSCs) is considered an attractive treatment for cartilage lesions and osteoarthritis. The establishment of cartilage regenerative medicine is an important clinical issue, but the search for cell sources able to restore cartilage integrity proves to be challenging. The aim of this study was to create cartilage grafts from the combination of AT-MSCs and collagen substrates.

Methods

Mesenchymal stem cells were obtained from human donors' adipose tissue, and collagen scaffold, obtained from human skin and cleaned from blood vessels, adipose tissues, and debris, which only preserve dermis and epidermis, were seeded and cultured on collagen substrates and differentiated to chondrocytes. The obtained chondrocyte extracellular matrix of cartilage was then evaluated for the expression of chondrocyte-/cartilage-specific markers, the Cartilage Oligomeric Matrix Protein (COMP), collagen X, alpha-1 polypeptide (COL10A1), and the Collagen II, Human Tagged ORF Clone (COL2A1) by using the reverse transcription polymerase chain reaction (RT-PCR).

Results

Our findings have shown that the dermal collagen may exert important effects on the quality of in vitro expanded chondrocytes, leading in this way that the influence of collagen skin matrix helps to produce highly active and functional chondrocytes for long-term cartilage tissue regeneration.

Conclusion

This research opens up the possibility of generating cartilage grafts with the precise purpose of improving the existing limitation in current clinical procedures.

Chemistry of Phosphorene: Synthesis, Functionalization and Biomedical Applications in an Update Review

The present review aims to highlight the potential of an emerging 2D single element material: phosphorene. Attention is focused on the more recent studies on phosphorene, in terms of synthetic approaches, modification aimed at its stabilization, and potential applications in the biomedical field. Critical aspects for a practical use of phosphorene are discussed, in order to show a realistic scenario and challenges facing researchers.