A Review about the Recent Advances in Selected NonThermal Plasma Assisted Solid-Gas Phase Chemical Processes

Chemical Bonds Containing Hydrogen: Choices for Hydrogen Carriers and Catalysts

Compounds containing B─H, C─H, N─H, or O─H bonds with high hydrogen content have been extensively studied as potential hydrogen carriers. Their hydrogen storage performance is largely determined by the nature of these bonds, decomposition pathways, and the properties of the dehydrogenation products. Among these compounds, methanol, cyclohexane, and ammonia stand out due to their low costs and established infrastructure, making them promising hydrogen carriers for large-scale storage and transport. They offer viable pathways for decarbonizing society by enabling hydrogen to serve as a clean energy source. However, several challenges persist, including the high temperatures required for (de)hydrogenation, slow kinetics, and the reliance on costly catalysts. To address these issues, strategies such as chemical modification and catalyst development are being pursued to improve hydrogen cycling performance. This review highlights recent progress in hydrogen carriers with B─H, C─H, N─H, or O─H bonds. It examines the fundamental characteristics of these bonds and carriers, as well as advances in catalyst development. Our objective is to offer a comprehensive understanding of current state of hydrogen carriers and identify future research directions, such as molecular modification and system optimization. Innovations in these areas are crucial to advance hydrogen storage technologies for a large-scale hydrogen deployment.

Effect of Gas Composition on Temperature and CO2 Conversion in a Gliding Arc Plasmatron reactor: Insights for Post-Plasma Catalysis from Experiments and Computation

Plasma-based CO2 conversion has attracted increasing interest. However, to understand the impact of plasma operation on post-plasma processes, we studied the effect of adding N2, N2/CH4 and N2/CH4/H2O to a CO2 gliding arc plasmatron (GAP) to obtain valuable insights into their impact on exhaust stream composition and temperature, which will serve as feed gas and heat for post-plasma catalysis (PPC). Adding N2 improves the CO2 conversion from 4 % to 13 %, and CH4 addition further promotes it to 44 %, and even to 61 % at lower gas flow rate (6 L/min), allowing a higher yield of CO and hydrogen for PPC. The addition of H2O, however, reduces the CO2 conversion from 55 % to 22 %, but it also lowers the energy cost, from 5.8 to 3 kJ/L. Regarding the temperature at 4.9 cm post-plasma, N2 addition increases the temperature, while the CO2/CH4 ratio has no significant effect on temperature. We also calculated the temperature distribution with computational fluid dynamics simulations. The obtained temperature profiles (both experimental and calculated) show a decreasing trend with distance to the exhaust and provide insights in where to position a PPC bed.

Green synthesis of 1,3,5-triazine derivatives using a sonochemical protocol

1,3,5-triazine derivatives are useful compounds with potential applications in various branches of chemical industry, including pharmaceutical chemistry, cosmetic chemistry, photochemistry, and organic chemistry. Due to the growing environmental requirements on conducting efficient, economical, and safe syntheses, development of new methods for synthesizing organic compounds is highly desirable. In this publication, we present a protocol for the synthesis of 1,3,5-triazine derivatives using a sonochemical approach. In as little as 5 min, it is possible to obtain most of the investigated compounds with a yield of over 75%. An undeniable advantage of this method, besides its short time, is the use of water as the solvent. Furthermore, we provide examples that the sonochemical method may be more versatile than the competing microwave method. Analysis conducted using the DOZNTM 2.0 tool revealed that in terms of the 12 principles of green chemistry, the developed sonochemical method is 13 times "greener" than the classical one. Additionally, it has been demonstrated that the investigated molecules are attractive for their application as drug-like compounds.

Progress Made in Non-Metallic-Doped Materials for Electrocatalytic Reduction in Ammonia Production

The electrocatalytic production of ammonia has garnered considerable interest as a potentially sustainable technology for ammonia synthesis. Recently, non-metallic-doped materials have emerged as promising electrochemical catalysts for this purpose. This paper presents a comprehensive review of the latest research on non-metallic-doped materials for electrocatalytic ammonia production. Researchers have engineered a variety of materials, doped with non-metals such as nitrogen (N), boron (B), phosphorus (P), and sulfur (S), into different forms and structures to enhance their electrocatalytic activity and selectivity. A comparison among different non-metallic dopants reveals their distinct effects on the electrocatalytic performance for ammonia production. For instance, N-doping has shown enhanced activity owing to the introduction of nitrogen vacancies (NVs) and improved charge transfer kinetics. B-doping has demonstrated improved selectivity and stability, which is attributed to the formation of active sites and the suppression of competing reactions. P-doping has exhibited increased ammonia generation rates and Faradaic efficiencies, likely due to the modification of the electronic structure and surface properties. S-doping has shown potential for enhancing electrocatalytic performance, although further investigations are needed to elucidate the underlying mechanisms. These comparisons provide valuable insights for researchers to conduct in-depth studies focusing on specific non-metallic dopants, exploring their unique properties, and optimizing their performance for electrocatalytic ammonia production. However, we consider it a priority to provide insight into the recent progress made in non-metal-doped materials and their potential for enabling long-term and efficient electrochemical ammonia production. Additionally, this paper discusses the synthetic procedures used to produce non-metal-doped materials and highlights the advantages and disadvantages of each method. It also provides an in-depth analysis of the electrochemical performance of these materials, including their Faradaic efficiencies, ammonia yield rate, and selectivity. It examines the challenges and prospects of developing non-metallic-doped materials for electrocatalytic ammonia production and suggests future research directions.

Effect of the number of Cyperus rotundus and medium height on the performance of batch-constructed wetland in treating aquaculture effluent

Increasing aquaculture cultivation produces large quantities of wastewater. If not handled properly, it can have negative impacts on the environment. Constructed wetlands (CWs) are one of the phytoremediation methods that can be applied to treat aquaculture effluent. This research was aimed at determining the performance of Cyperus rotundus in removing COD, BOD, TSS, turbidity, ammonia, nitrate, nitrite, and phosphate from the batch CW system. Treatment was carried out for 30 days with variations in the number of plants (10, 15, and 20) and variations in media height (10, 12, and 14 cm). The result showed that aquaculture effluent contains high levels of organic compounds and nutrients, and C. rotundus can grow and thrive in 100% of aquaculture effluent. Besides that, the use of C. rotundus in CWs with the effect of numbers of plants and media height showed performance of COD, BOD, TSS, turbidity, ammonia, nitrate, nitrite, and phosphate with 70, 79, 90, 96, 64, 82, 92, and 48% of removal efficacy, respectively. There was no negative impact observed on C. rotundus growth after exposure to aquaculture effluent, as indicated by the increase in wet weight, dry weight, and growth rate when compared to the control. Thus, adding aquaculture effluent to CWs planted with C. rotundus supports the growth and development of plants while also performing phytoremediation.

Antibacterial and deodorizing effects of cold atmospheric plasma-applied electronic deodorant

Axillary odor is a malodor produced by bacterial metabolism near the apocrine glands, which often causes discomfort in an individual's daily life and social interactions. A deodorant is a personal care product designed to alleviate or mask body odor. Currently, most deodorants contain antimicrobial chemicals and fragrances for odor management; however, direct application to the underarm skin can result in irritation or sensitivity. Therefore, there is a growing interest in technologies that enable disinfection and odor control without the antiperspirants or perfumes. The cold atmospheric plasma temporally generates reactive radicals that can eliminate bacteria and surrounding odors. In this study, cultured Staphylococcus hominis and Corynebacterium xerosis, the causative bacteria of axillary bromhidrosis, were killed after 90% plasma exposure for 3 min. Moreover, the electronic nose system indicated a significant reduction of approximately 51% in 3-hydroxy-3-methylhexanoic acid and approximately 34% in 3-methyl-3-sulfanylhexan-1-ol, the primary components of axillary odor, following a 5-min plasma exposure. These results support the dual function of our deodorant in eliminating bacteria and axillary odors without the chemical agents. Therefore, cold atmospheric plasma-applied deodorant devices have great potential for the treatment and management of axillary odors as a non-contact approach without chemical use in daily life.

Dechlorination of waste polyvinyl chloride (PVC) through non-thermal plasma

Dechlorination is essential for the chemical recycling of waste polyvinyl chloride (PVC) plastics. This study investigated the use of non-thermal plasma (NTP) for chlorine removal, with a focus on the effects of treatment time and discharge power on dechlorination efficiency. The results showed that longer treatment times and higher discharge powers led to better dechlorination performance. The maximum efficiency (98.25%) and HCl recovery yield (55.72%) were achieved at 180 W power after 40 min of treatment where 96.44% of Cl existed in the form of HCl gas, 1.44% in the liquid product, and 2.12% in the solid residue product. NTP at a discharge power of 150 W showed better dechlorination performance compared to traditional thermal pyrolysis treatment in temperatures ranging from 200 to 400 °C. The activation energy analysis of the chlorine removal showed that compared to pyrolysis-based dechlorination (137.09 kJ/mol), NTP-based dechlorination (23.62 kJ/mol) was more easily achievable. This work presents a practical method for the dechlorination of waste PVC plastic using a novel technology without requiring additional thermal and pressure input.

Self-cementation of gold tailings activated by nonthermal plasma irradiated calcium (hydro)oxide

The alkalinity of CaO is commonly insufficient in alkali-activating raw soils or minerals for the formation of cementation or geopolymerization. In this study, nonthermal plasma (NTP) irradiation was employed to activate traditional CaO to enhance its efficacy in alkali activation and further intensify the self-cementation of gold tailings. The solidification/stabilization (S/S) of the gold tailings-based matrix activated by NTP-CaO was better than that of CaO. The NTP irradiation enhanced the surface hydroxyl groups and oxygen atoms, decreased the binding energy, formed nanoparticles, and significantly changed the morphologies of the calcium activator. The dosage of the NTP-irradiated CaO (NTP-CaO) directly affected the self-cemented solidification/stabilization of gold tailings. The Johnson-Mehl-Avrami-Kolmogorov model was appropriate for analysing the NTP-CaO-activated geopolymerization kinetics of gold tailings. Three-dimensional (3D) structural minerals covered with small pores were determined in the NTP-CaO-activated cemented samples. The employment of NTP-CaO facilitated the formation of aluminosilicate geopolymers during the self-cementation of gold tailings according to comprehensive characterization strategies. The study achieves the efficient self-remediation of gold tailings by activating calcium precursors, which further solves the contradiction between salinization and alkali activation in the field of noncalcined cementitious materials.

Catalytic Hydrogen Evolution from H2S Cracking over CrxZnS Catalyst in a Cylindrical Single-Layered Dielectric Barrier Discharge Plasma Reactor

The use of non-thermal plasma technology in producing green fuels is a much-appreciated environmentally friendly approach. In this study, an Al₂O₃-supported Cr_xZnS semiconductor catalyst was tested for hydrogen evolution from hydrogen sulfide (H₂S) gas by using a single-layered dielectric barrier discharge (DBD) system. The Al₂O₃-supported Cr_xZnS catalyst (x = 0.20, 0.25, and 0.30) was produced by using a co-impregnation method and characterized for its structural and photocatalytic characteristics. The discharge column of the DBD system was filled with this catalyst and fed with hydrogen sulfide and argon gas. The DBD plasma was sustained with a fixed AC source of 10 kV where plasma produced species and UV radiations activated the catalyst to break H₂S molecules under ambient conditions. The catalyst (hexagonal-cubic-sphalerite structure) showed an inverse relationship between the band gap and the dopant concentration. The hydrogen evolution decreased with an increase in dopant concentration in the nanocomposite. The Cr_0.20ZnS catalyst showed excellent photocatalytic activity under the DBD exposure by delivering 100% conversion efficiency of H₂S into hydrogen. The conversion decreased to 96% and 90% in case of Cr_0.25ZnS and Cr_0.30ZnS, respectively.

Electrification of Chemical Engineering: A New Way to Intensify Chemical Processes

The increasing use of fossil fuels as an energy source has resulted in a serious problem regarding two of their main drawbacks: (i) the exhaustion of these resources and (ii) the greenhouse gas (GHG) emissions associated with their use [...]

Electrified Hydrogen Production from Methane for PEM Fuel Cells Feeding: A Review

The greatest challenge of our times is to identify low cost and environmentally friendly alternative energy sources to fossil fuels. From this point of view, the decarbonization of industrial chemical processes is fundamental and the use of hydrogen as an energy vector, usable by fuel cells, is strategic. It is possible to tackle the decarbonization of industrial chemical processes with the electrification of systems. The purpose of this review is to provide an overview of the latest research on the electrification of endothermic industrial chemical processes aimed at the production of H2 from methane and its use for energy production through proton exchange membrane fuel cells (PEMFC). In particular, two main electrification methods are examined, microwave heating (MW) and resistive heating (Joule), aimed at transferring heat directly on the surface of the catalyst. For cases, the catalyst formulation and reactor configuration were analyzed and compared. The key aspects of the use of H2 through PEM were also analyzed, highlighting the most used catalysts and their performance. With the information contained in this review, we want to give scientists and researchers the opportunity to compare, both in terms of reactor and energy efficiency, the different solutions proposed for the electrification of chemical processes available in the recent literature. In particular, through this review it is possible to identify the solutions that allow a possible scale-up of the electrified chemical process, imagining a distributed production of hydrogen and its consequent use with PEMs. As for PEMs, in the review it is possible to find interesting alternative solutions to platinum with the PGM (Platinum Group Metal) free-based catalysts, proposing the use of Fe or Co for PEM application.

In Situ Tracking of Nonthermal Plasma Etching of ZIF-8 Films

Surface characterization is critical for understanding the processes used for preparing catalysts, sorbents, and membranes. Nonthermal plasma (NTP) is a process that achieves high reactivity at low temperatures and is used to tailor the surface properties of materials. In this work, we combine the capabilities of infrared reflection absorption spectroscopy (IRRAS) with NTP for the in situ interrogation of zeolitic imidazolate framework-8 (ZIF-8) thin films to probe modifications in the material induced by oxygen and nitrogen plasmas. The IRRAS measurements in oxygen plasma reveal etching of organic ligands with sequential removal of the methyl group and imidazole ring and with the formation of carbonyl moieties (C═O). In contrast, nitrogen plasma induces mild etching and grafting of nitrile groups (-C≡N). Scanning electron microscopy imaging shows that oxygen plasma, at prolonged times, significantly degrades the ZIF-8 film at the grain boundaries. Treatment of ZIF-8 membranes using mild plasma conditions yields a fivefold enhancement for H₂/N₂ and CO₂/CH₄ ideal selectivities and an eightfold enhancement for CO₂/N₂ ideal selectivity. Additionally, the new tools described here can be used for spectroscopic in situ tracking of plasma-induced chemistry on thin films in general.

The Route from Green H2 Production through Bioethanol Reforming to CO2 Catalytic Conversion: A Review

Currently, a progressively different approach to the generation of power and the production of fuels for the automotive sector as well as for domestic applications is being taken. As a result, research on the feasibility of applying renewable energy sources to the present energy scenario has been progressively growing, aiming to reduce greenhouse gas emissions. Following more than one approach, the integration of renewables mainly involves the utilization of biomass-derived raw material and the combination of power generated via clean sources with conventional power generation systems. The aim of this review article is to provide a satisfactory overview of the most recent progress in the catalysis of hydrogen production through sustainable reforming and CO2 utilization. In particular, attention is focused on the route that, starting from bioethanol reforming for H2 production, leads to the use of the produced CO2 for different purposes and by means of different catalytic processes, passing through the water–gas shift stage. The newest approaches reported in the literature are reviewed, showing that it is possible to successfully produce “green” and sustainable hydrogen, which can represent a power storage technology, and its utilization is a strategy for the integration of renewables into the power generation scenario. Moreover, this hydrogen may be used for CO2 catalytic conversion to hydrocarbons, thus giving CO2 added value.

Non-thermal plasma irradiated polyaluminum chloride for the heterogeneous adsorption enhancement of Cs+ and Sr2+ in a binary system

The natural ecosystem will continually deteriorate for decades by the leakage of Cs and Sr isotopes. The exploration of the new materials or techniques for the efficient treatment of radioactive wastewater is critically important. In this study, a dielectric barrier discharge (DBD) configuration was constructed to operate the non-thermal plasma (NTP). The NTP was incorporated into the synthesis of polyaluminum chloride (PAC) in two different procedures to intensify the synthesis of PAC (NTP-PAC) and enhance the further removal of Cs and Sr from wastewater. The employment of NTP in two procedures both had significantly changed the physicochemical characteristics of PAC materials, which facilitated the further adsorption application of NTP-PAC on the treatment of Cs⁺ and Sr²⁺. Different molecular, morphological, and adsorption characteristics were confirmed to the NTP-PAC materials. The heterogeneous adsorption of the NTP-PAC can be appropriately fitted by both the pseudo-first-order kinetic model and the Elovich model. Both physisorption and chemisorption reaction mechanisms were ensured for the heterogeneous adsorption of the NTP-PAC material towards Cs⁺ and Sr²⁺, which guaranteed the excellent adsorption performance of NTP-PAC materials compared to PAC. The electron collisions caused by NTP with alum pulp created highly reactive growth precursors and intensified the nucleation and hydrolysis polymerization of PAC. The employment of NTP explicitly broadens the reaction pathways between PAC and cationic contaminants in the aqueous environment, which expands the application area of PAC materials in environmental sustainability.

Do we need cold plasma treated fruit and vegetable juices? A case study of positive and negative changes occurred in these daily beverages

Cold atmospheric pressure plasma (CAPP) is a prospective technology for various branches of industry. As such, much attention has been recently paid towards the use of CAPPs for treating fruit and vegetable beverages as they do not need any more to be thermally pasteurized or sanitized. However, this application of CAPPs is not only limited to the improvement of their shelf-life. It could also contribute to the enhancement of their nutritional properties and anticancer activity. This could be achieved due to the presence of numerous reactive oxygen and nitrogen species (RONS), produced at the plasma-liquid interface, that might contribute to the increase of the content of nutritional and bioactive compounds, simply upgrading the juices. In this context, the present review focuses on the recent advances in the CAPP-based technology towards the processing of fruit and vegetable juices. As such, a series of different CAPP-based reaction-discharge systems and their configurations are reviewed and set together with the physicochemical, nutritional, and antimicrobial characteristics of the CAPP-treated juices, providing an useful insight into the perspective development of emerging CAPP technology.

Fabrication of aerosol-based nanoparticles and their applications in biomedical fields

BACKGROUND

Traditionally, nanoparticles for biomedical applications have been produced via the classical wet chemistry method, with size control remaining a major problem in drug delivery. In recent years, advances in aerosol-based technologies have led to the development of methods that enable the production of nanosized particles and have opened up new opportunities in the field of nano-drug delivery and biomedicine. Aerosol-based technologies have been constantly used to synthesize multifunctional nanoparticles with different properties, which extends their possible biological and medicinal applications. Moreover, aerosol technologies are often more beneficial than other existing approaches because of the major disadvantages of these other techniques.

AREA COVERED

This review provides a brief discussion of the existing aerosol-based nanotechnologies and applications of nanoparticles in a variety of diseases. Various types of nanoparticles, such as graphene oxide, Prussian blue, black phosphorous, gold, copper, silver, tellurium, iron oxide, titania, magnesium oxide, and zinc oxide nanoparticles, prepared using aerosol technologies are discussed in this review. The different tactics used for surface modifications are also outlined. The biomedical applications of nanoparticles in chemotherapy, bacterial/fungal/viral treatment, disease diagnosis, and biological assays are also presented in this review.

EXPERT OPINION

Aerosol-based technologies can be used to design nanoparticles with the desired functionality. This significantly benefits the nanomedicine field, particularly as product parameters are becoming more encompassing and exacting. One of the biggest issues with conventional methods is their scale-up/scale-down and clinical translation. Aerosol-based nanoparticle synthesis helps enhance control over the product properties and facilitate their use for clinical applications.

Catalytic Combustion of Toluene over Highly Dispersed Cu-CeOx Derived from Cu-Ce-MOF by EDTA Grafting Method

In this work, Cu-CeOx-MOF catalysts with well-dispersed Cu in different contents were synthesized via the ethylenediaminetetraacetic acid (EDTA) grafting method. EDTA was grafted in Ce-MOF-808 to anchor Cu and then the metal-organic frameworks (MOFs) were utilized as sacrificial template to form highly performed Cu-CeOx-MOF for toluene catalytic combustion. In this series of samples, Cu-CeOx-MOF-0.2 had a higher ratio of Oα/(Oα+Oβ), more oxygen vacancies and performed better low-temperature reducibility. Cu-CeOx-MOF-0.2 showed outstanding catalytic activity and stability. The T90 (temperature when toluene conversion achieved 90%) of Cu-CeOx-MOF-0.2 was 226 °C at 60,000 mL/(gcat∙h). In situ diffuse reflectance infrared transform spectroscopy (in situ DRIFTS) results revealed that the opening of aromatic ring and the deep oxidation of carboxylate were key steps for toluene catalytic combustion over Cu-CeOx-MOF-0.2.

Nonthermal Plasma Induced Fabrication of Solid Acid Catalysts for Glycerol Dehydration to Acrolein

The feasibility of fabricating better solid acid catalysts using nonthermal plasma (NTP) technology for biobased acrolein production is demonstrated. NTP discharge exposure was integrated in catalyst fabrication in air or argon atmosphere. The fabricated catalysts were characterized by Brunauer–Emmett–Teller surface area analysis, temperature-programmed desorption of ammonia, X-ray powder diffraction and Fourier-transform infrared spectroscopy of pyridine adsorption, in comparison to regularly prepared catalysts as a control. Further, kinetic results collected via glycerol dehydration experiments were compared, and improvement in acrolein selectivity was displayed when the catalyst was fabricated in the argon NTP, but not in the air NTP. Possible mechanisms for the improvement were also discussed.