SERS-Based Flavonoid Detection Using Ethylenediamine-β-Cyclodextrin as a Capturing Ligand

Mitigation of Polysulfide Shuttling in Lithium-Sulfur Batteries Utilizing Vanadium Pentoxide/Polypyrrole Nanocomposite Separators

Lithium-sulfur (Li-S) batteries are promising energy storage devices due to their high theoretical energy density and cost-effectiveness. However, the shuttle effect of polysulfides during the charging and discharging processes leads to a rapid decline in capacity, thereby restricting their application in energy storage. The separator, a crucial component of Li-S batteries, facilitates the transport of Li+ ions. However, the large pores present on the surface of the separator are insufficient to prevent the shuttling effect of polysulfides. This paper proposes a straightforward coating method to introduce a vanadium pentoxide (V2O5) /polypyrrole (PPy) functional coating on the surface of a conventional polymer separator. The unique composition of the V2O5/PPy layer plays an essential role in effectively preventing the bidirectional movement of polysulfides and the subsequent formation of inactive sulfur. Compared to those using polypyrrole separators,when equipped with a V2O5/PPy separator, the capacity retention after 100 cycles was recorded at 98 %, with a measured rate of capacity degradation at just 0.016 %, despite the sulfur content being as high as 1.84 mg cm-2. Furthermore, after 400 cycles at 1 C, the capacity retention rate reached 57.6 %. The thoughtful design of this modified separator represents an effective strategy for improving the performance of Li-S batteries.

Recent Advances on Rapid Detection Methods of Steroid Hormones in Animal Origin Foods

Animal-derived foods constitute a crucial source of nutrients for humans. The judicious application of steroid hormones in the breeding process can serve multiple purposes, including growth promotion, weight gain, and anti-inflammatory effects, among others. However, excessive misuse poses a considerable risk to both food safety and consumer health. Currently, the primary means of detecting steroid hormones involve liquid chromatography, gas chromatography, and their combination with mass spectrometry. These methods necessitate advanced instrumentation, intricate pretreatment procedures, and the expertise of specialized laboratories and technicians. In recent years, the swift evolution of analytical science, technology, and instrumentation has given rise to various rapid detection techniques for steroid hormone residues, providing a robust technical foundation for ensuring food safety. This review commences by delineating the roles of steroid hormones, the associated residue hazards, and the pertinent residue restriction standards. Subsequently, it delves deeply into the analysis of the most recent rapid detection techniques for steroid hormones, ultimately culminating in an assessment of the challenges currently confronting the field, along with an exploration of potential future advancements. We sincerely hope that this review will inspire and provide valuable insights to the pertinent researchers.

Exploring the applications for Abscissic acid (ABA) detection using perovskite derived opto-electronic sensors

The hormone abscisic acid (ABA) is crucial in the regulation of many physiological processes in plants, particularly in stress response and developmental control. Recent developments in detection methods utilizing opto-electronic sensors have enabled a more profound comprehension of the processes linked to plant hormones, namely ABA. The present work investigates the potential uses of opto-electronic sensors produced from tailored perovskite materials for the targeted detection of ABA. Modified perovskite substrates, which are characterized by their large surface area, intense Raman scattering, and great sensitivity, provide a distinct advantage in differentiating ABA from other interfering substances present in intricate plant media. Notwithstanding the advancements in these sophisticated detection methods, there is still a significant lack of knowledge on how the distinct opto-electronic characteristics of high-purity perovskite crystals impact their ability to detect ABA. This work aims to close this gap by a thorough investigation of the production, modification, and use of sensors based on perovskite materials. This study also intends to give a thorough analysis comparing the performance of perovskite substrates with traditional substrates, with a specific focus on important characteristics including efficiency, specificity, and sensitivity. Furthermore, the objective of this study is to evaluate the capacity of perovskite substrates to surpass the constraints of conventional detection techniques, namely in terms of sensitivity and interference from competing matrix components. The objective of this work is to make novel contributions to the design and optimization of opto-electronic sensors based on perovskite materials, with the goal of achieving more accurate and dependable detection of ABA. Consequently, this could facilitate the advancement of specialized diagnostic instruments for monitoring plant hormones, so enabling the use of enhanced agricultural techniques and effective stress management in plants.

Chitosan Oligosaccharide Modified Bovine Serum Albumin Nanoparticles for Improving Oral Bioavailability of Naringenin

INTRODUCTION

With the rapid development of nanotechnology, the research and development of nano-drugs have become one of the development directions of drug innovation. The encapsulation of the nanoparticles can change the biological distribution of the drug in vivo and improve the bioavailability of the drug in vivo. Naringenin is poorly soluble in water and has a low bioavailability, thus limiting its clinical application. The main purpose of this study was to develop a nano-sized preparation that could improve the oral bioavailability of naringenin.

METHODS

Chitosan oligosaccharide modified naringenin-loaded bovine serum albumin nanoparticles (BSA-COS@Nar NPs) were prepared by emulsification solvent evaporation and electrostatic interaction. The nanoparticles were characterized by HPLC, laser particle size analyzer, transmission electron microscope and X-ray diffraction analysis. The release in vitro was investigated, and the behavior of nanoparticles in rats was also studied. The caco-2 cell model was established in vitro to investigate the cytotoxicity and cellular uptake of nanoparticles.

RESULTS

BSA-COS@Nar NPs were successfully prepared, and the first-order release model was confirmed in vitro release. In vivo pharmacokinetic results indicated that the area under the drug concentration- time curve (AUC) of BSA-COS@Nar NPs was 2.37 times more than free naringenin. Cytotoxicity and cellular uptake results showed that BSA-COS@Nar NPs had no significant cytotoxic effect on Caco- 2 cells and promoted cellular uptake of the drug.

CONCLUSION

BSA-COS@Nar NPs could improve the in vivo bioavailability of naringenin.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2017-2018

This review is the tenth update of the original article published in 1999 on the application of matrix-assisted laser desorption/ionization mass spectrometry (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2018. Also included are papers that describe methods appropriate to glycan and glycoprotein analysis by MALDI, such as sample preparation techniques, even though the ionization method is not MALDI. Topics covered in the first part of the review include general aspects such as theory of the MALDI process, new methods, matrices, derivatization, MALDI imaging, fragmentation and the use of arrays. The second part of the review is devoted to applications to various structural types such as oligo- and poly-saccharides, glycoproteins, glycolipids, glycosides, and biopharmaceuticals. Most of the applications are presented in tabular form. The third part of the review covers medical and industrial applications of the technique, studies of enzyme reactions, and applications to chemical synthesis. The reported work shows increasing use of combined new techniques such as ion mobility and highlights the impact that MALDI imaging is having across a range of diciplines. MALDI is still an ideal technique for carbohydrate analysis and advancements in the technique and the range of applications continue steady progress.

Advances on the Antioxidant Activity of a Phytocomplex Product Containing Berry Extracts from Romanian Spontaneous Flora

The present study aimed to evaluate the antioxidant properties of a phytocomplex product obtained using 10% hydroalcoholic extractive solutions, in equal proportions, from Ribes nigrum, Rubus idaeus, Rubus fruticosus and Fragaria moschata fresh fruits harvested from the spontaneous flora of Romania. These plant products were recognized for their rich antioxidant content. The phytochemical profile was assessed using HPLC chromatography and UV-Vis spectrometry. The obtained results highlighted the presence of complex bioactive compounds with antioxidant actions, namely anthocyanins, proanthocyanins and vitamin C. The antioxidant actions of the hydroalcoholic extractive solutions and the phytocomplex product were evaluated using chemiluminescence, electrochemical and superoxide dismutase (SOD) methods. The experimental results showed evident antioxidant activity in both the hydroalcoholic extracts and the phytocomplex product.

Applied surface enhanced Raman Spectroscopy in plant hormones detection, annexation of advanced technologies: A review

Plant hormones are the molecules that control the vigorous development of plants and help to cope with the stress conditions efficiently due to vital and mechanized physiochemical regulations. Biologists and analytical chemists, both endorsed the extreme problems to quantify plant hormones due to their low level existence in plants and the technological support is devastatingly required to established reliable and efficient detection methods of plant hormones. Surface Enhanced Raman Spectroscopy (SERS) technology is becoming vigorously favored and can be used to accurately and specifically identify biological and chemical molecules. Subsistence molecular properties with varying excitation wavelength require the pertinent substrate to detect SERS signals from plant hormones. Three typical mechanisms of Raman signal enhancement have been discovered, electromagnetic, chemical and Tip-enhanced Raman spectroscopy (TERS). Though, complex detection samples hinder in consistent and reproducible results of SERS-based technology. However, different algorithmic models applied on preprocessed data enhanced the prediction performances of Raman spectra by many folds and decreased the fluorescence value. By incorporating SERS measurements into the microfluidic platform, further highly repeatable SERS results can be obtained. This review paper tends to study the fundamental working principles, methods, applications of SERS systems and their execution in experiments of rapid determination of plant hormones as well as several ways of integrated SERS substrates. The challenges to develop an SERS-microfluidic framework with reproducible and accurate results for plant hormone detection are discussed comprehensively and highlighted the key areas for future investigation briefly.

Cyclodextrin-assisted surface-enhanced Raman spectroscopy: a critical review

Numerous approaches have been proposed to overcome the intrinsically low selectivity of surface-enhanced Raman spectroscopy (SERS), and the modification of SERS substrates with diverse recognition molecules is one of such approaches. In contrast to the use of antibodies, aptamers, and molecularly imprinted polymers, application of cyclodextrins (CDs) is still developing with less than 100 papers since 1993. Therefore, the main goal of this review is the critical analysis of all available papers on the use of CDs in SERS analysis, including physicochemical studies of CD complexation and the effect of CD presence on the Raman enhancement. The results of the review reveal that there is controversial information about CD efficiency and further experimental investigations have to be done in order to estimate the real potential of CDs in SERS-based analysis.

Novel extraction, rapid assessment and bioavailability improvement of quercetin: A review

Quercetin (QUR) have got the attention of scientific society frequently due to their wide range of potential applications. QUR has been the focal point for research in various fields, especially in food development. But, the QUR is highly unstable and can be interrupted by using conventional assessment methods. Therefore, researchers are focusing on novel extraction and non-invasive tools for the non-destructive assessment of QUR. The current review elaborates the different novel extraction (ultrasound-assisted extraction, microwave-assisted extraction, supercritical fluid extraction, and enzyme-assisted extraction) and non-destructive assessment techniques (fluorescence spectroscopy, terahertz spectroscopy, near-infrared spectroscopy, hyperspectral imaging, Raman spectroscopy, and surface-enhanced Raman spectroscopy) for the extraction and identification of QUR in agricultural products. The novel extraction approaches facilitate shorter extraction time, involve less organic solvent, and are environmentally friendly. While the non-destructive techniques are non-interruptive, label-free, reliable, accurate, and environmental friendly. The non-invasive spectroscopic and imaging methods are suitable for the sensitive detection of bioactive compounds than conventional techniques. QUR has potential therapeutic properties such as anti-obesity, anti-diabetes, antiallergic, antineoplastic agent, neuroprotector, antimicrobial, and antioxidant activities. Besides, due to the low bioavailability of QUR innovative drug delivery strategies (QUR loaded gel, QUR polymeric micelle, QUR nanoparticles, glucan-QUR conjugate, and QUR loaded mucoadhesive nanoemulsions) have been proposed to improve its bioavailability and providing novel therapeutic approaches.

Applications of surface-enhanced Raman spectroscopy in detection fields

Surface-enhanced Raman spectroscopy (SERS) is a Raman spectroscopy technique that has been widely used in food safety, environmental monitoring, medical diagnosis and treatment and drug monitoring because of its high selectivity, sensitivity, rapidness, simplicity and specificity in identifying molecular structures. This review introduces the detection mechanism of SERS and summarizes the most recent progress concerning the use of SERS for the detection and characterization of molecules, providing references for the later research of SERS in detection fields.

Mono-6-Deoxy-6-Aminopropylamino-β-Cyclodextrin on Ag-Embedded SiO2 Nanoparticle as a Selectively Capturing Ligand to Flavonoids

It has been increasingly important to develop a highly sensitive and selective technique that is easy to handle in detecting levels of beneficial or hazardous analytes in trace quantity. In this study, mono-6-deoxy-6-aminopropylamino-β-cyclodextrin (pr-β-CD)-functionalized silver-assembled silica nanoparticles (SiO2@Ag@pr-β-CD) for flavonoid detection were successfully prepared. The presence of pr-β-CD on the surface of SiO2@Ag enhanced the selectivity in capturing quercetin and myricetin among other similar materials (naringenin and apigenin). In addition, SiO2@Ag@pr-β-CD was able to detect quercetin corresponding to a limit of detection (LOD) as low as 0.55 ppm. The relationship between the Raman intensity of SiO2@Ag@pr-β-CD and the logarithm of the Que concentration obeyed linearity in the range 3.4-33.8 ppm (R2 = 0.997). The results indicate that SiO2@Ag@pr-β-CD is a promising material for immediately analyzing samples that demand high sensitivity and selectivity of detection.

Functionalized β-Cyclodextrin Immobilized on Ag-Embedded Silica Nanoparticles as a Drug Carrier

Cyclodextrins (CDs) have beneficial characteristics for drug delivery, including hydrophobic interior surfaces. Nanocarriers with β-CD ligands have been prepared with simple surface modifications as drug delivery vehicles. In this study, we synthesized β-CD derivatives on an Ag-embedded silica nanoparticle (NP) (SiO₂@Ag NP) structure to load and release doxorubicin (DOX). Cysteinyl-β-CD and ethylenediamine-β-CD (EDA-β-CD) were immobilized on the surface of SiO₂@Ag NPs, as confirmed by transmission electron microscopy (TEM), ultraviolet-visible (UV-Vis) spectrophotometry, and Fourier transform infrared (FTIR) spectroscopy. DOX was introduced into the β-CD on the SiO₂@Ag NPs and then successfully released. Neither cysteinyl-β-CD and EDA-β-CD showed cytotoxicity, while DOX-loaded cysteinyl-β-CD and EDA-β-CD showed a significant decrease in cell viability in cancer cells. The SiO₂@Ag NPs with β-CD provide a strategy for designing a nanocarrier that can deliver a drug with controlled release from modified chemical types.

Multilayer Ag-Embedded Silica Nanostructure as a Surface-Enhanced Raman Scattering-Based Chemical Sensor with Dual-Function Internal Standards

Surface-enhanced Raman scattering (SERS) spectroscopy is attractive in various detection analysis fields. However, the quantitative method using SERS spectroscopy remains as an area to be developed. The key issues in developing quantitative analysis methods by using SERS spectroscopy are the fabrication of reliable SERS-active materials such as nanoparticle-based structures and the acquisition of the SERS signal without any disturbance that may change the SERS signal intensity and frequency. Here, the fabrication of seamless multilayered core-shell nanoparticles with an embedded Raman label compound as an internal standard (ML_RLC dots) for quantitative SERS analysis is reported. The embedded Raman label compound in the nanostructure provides a reference value for calibrating the SERS signals. By using the ML_RLC dots, it is possible to gain target analyte signals of different concentrations while retaining the Raman signal of the internal standard. The ML_4-BBT dots, containing 4-bromobenzenethiol (4-BBT) as an internal standard, are successfully applied in the quantitative analysis of 4-fluorobenzenethiol and thiram, a model pesticide. Additionally, ratiometric analysis was proved practical through normalization of the relative SERS intensity. The ratiometric strategy could be applied to various SERS substrates for quantitative detection of a wide variety of targets.