Optimizing the Carbon Dioxide Reduction Pathway through Surface Modification by Halogenation

Boosting photocatalytic nitrogen reduction reaction by Jahn-Teller effect

Compared with traditional the Haber-Bosch process, photocatalytic ammonia production has attracted a considerable attention due to its advantages of low energy consumption and sustainability. In this work, we mainly study the photocatalytic nitrogen reduction reaction (NRR) on MoO3·0.55H2O and α-MoO3. Structure analysis shows that compared to α-MoO6, the [MoO6] octahedrons in MoO3·0.55H2O obviously distort (Jahn-Teller distortion), leading to the formation of Lewis acid active sites that favors the adsorption and activation of N2. X-ray photoelectron spectroscopy (XPS) further confirms the formation of more Mo5+ as Lewis acid active sites in MoO3·0.55H2O. Transient photocurrent, photoluminescence and electrochemical impedance spectra (EIS) confirmed that MoO3·0.55H2O has a higher charge separation and transfer efficiency than α-MoO3. Density functional theory (DFT) calculation further confirmed that the N2 adsorption on MoO3·0.55H2O is more favorable thermodynamically than that on α-MoO3. As a result, under visible light irradiation (λ ≥ 400 nm) for 60 min, an ammonia production rate of 88.6 μmol·gcat-1 was achieved on MoO3·0.55H2O, which is about 4.6 times higher than that on α-MoO3. In comparison to other photocatalysts, MoO3·0.55H2O exhibits an excellent photocatalytic NRR activity under visible light irradiation without using sacrificial agent. This work offers a new fundamental understanding to photocatalytic NRR from the viewpoint of crystal fine structure, which benefits designing efficient photocatalysts.

Engineering surface bromination in carbon nitride for efficient CO2 photoconversion to CH4

The direct conversion of CO₂ into reusable CH₄ fuel by solar energy can effectively solve the problems of energy crisis and carbon emissions. However, the challenge of photocatalytic CO₂ reduction to produce CH₄ is still low conversion efficiency and poor selectivity. Here, surface brominated carbon nitride (named CNBr) is fabricated for stable and efficient photocatalytic CO₂ reduction to produce CH₄ with a rate of 16.68 μmol h^-1 g^-1 (70.27 % selectivity). Br atom in CNBr can substitute the N atom in the tri-s-triazine unites, which promotes local charge separation, narrows band gap and deepens the conduction band of CNBr. Benefiting from Br as active sites, CO₂ can be enriched on the catalyst surface, and localized photogenerated electrons can activate the adsorbed CO₂ to form CH₄ through subsequent hydrogenation. Density functional theory results suggest that Br doping can effectively reduce the energy barrier of the rate-limiting step, accelerate the reaction, and induce the formation of *CHO, thereby improving the selectivity of CH₄. This work reveals that surface modification can simultaneously increase the activation site of CO₂ adsorption activation, enhance light absorption and accelerate charge, laying a solid foundation for the future design of carbon nitride based photocatalyst with high performance.

Bismuth with abundant defects for electrocatalytic CO2 reduction and Zn-CO2 batteries

To regulate the electronic structure of Bi sites and enhance their intrinsic activity, metal Bi with abundant defects was constructed. The optimized sample displayed a higher selectivity (93.9% at -0.9 V) and a larger current density (-10 mA cm^-2 at -1.0 V) towards electrocatalytic CO₂ reduction to formate, which can be mainly attributed to abundant defect sites and the optimized electronic structure. The assembled Zn-CO₂ batteries displayed a power density of 1.16 mW cm^-2 and a cycling stability up to 22 h. This work deepens the research of Bi-based catalysts towards CO₂ transformation and related energy devices.

Highly Selective Production of Ethanol Over Hierarchical Bi@Bi2 MoO6 Composite via Bicarbonate-Assisted Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction is a sustainable and inexpensive method to solve the energy crisis and the greenhouse effect. However, the major stumbling blocks such as poor product selectivity, low yield of the multi-carbon products, and serious recombination of electron-hole pairs hinder practical application of photocatalysts. Herein, a high-performance Bi@Bi₂ MoO₆ photocatalyst, Bi nanoparticles grown on the surface of Bi₂ MoO₆ nanosheets with oxygen vacancies, was fabricated via a simple solvothermal approach. Benefiting from the abundant active sites and effective separation of photogenerated carriers of Bi₂ MoO₆ nanosheets, and the localized surface plasmon resonance effect of Bi nanoparticles, the Bi@Bi₂ MoO₆ sample exhibited great photocatalytic CO₂ reduction activity. Furthermore, adding NaHCO₃ into the system not only significantly increased the C₂ H₅ OH generation rate but also enhanced the product selectivity. In the photocatalytic measurement (0.17 mol L^-1 CO₂ -saturated NaHCO₃ solution), the highest formation rates of CO, CH₃ OH, and C₂ H₅ OH were reached at 0.85, 0.59, and 17.93 μmol g^-1  h^-1 (≈92 % selectivity), respectively.

Defect Engineering of Photocatalysts towards Elevated CO2 Reduction Performance

Photocatalytic CO₂ reduction provides a promising solution to address the crises of massive CO₂ emissions and fossil energy shortages. As one of the most effective strategies to promote CO₂ photoconversion, defect engineering shows great potential in modulating the electronic structure and light absorption properties of photocatalysts while increasing surface active sites for CO₂ activation and conversion. This Review summarizes the recent progress in defect engineering of photocatalysts to promote CO₂ reduction performances from the following four aspects: 1) Approaches to defect (mainly vacancy and dopant) generation in photocatalysts; 2) defect structure characterization techniques; 3) physical and chemical properties of defect-engineered photocatalysts; 4) CO₂ reduction performance enhancements in activity, selectivity, and stability of photocatalysts by defect engineering. This Review is expected to present readers with a comprehensive view of progress in the field of photocatalytic CO₂ reduction through defect engineering for elevated CO₂ -to-fuels conversion efficiency.

Tuning Crystallinity and Surface Hydrophobicity of a Cobalt Phosphide Cocatalyst to Boost CO2 Photoreduction Performance

Photocatalytic CO₂ conversion is a promising method to yield carbon fuels, but it remains challenging to regulate catalytic materials for enhanced reaction efficiency and tunable product selectivity. This study concerns the development of a facile and efficient thermal post-treatment method to improve the crystallinity and surface hydrophobicity of a cobalt phosphide (CoP) cocatalyst, which promotes the separation and transfer of photoexcited charge carriers, reinforces CO₂ chemisorption, and weakens the H₂ O affinity. Compared with pristine CoP, the optimal CoP-600 cocatalyst displays a 3.5-fold enhancement in activity and a 2.3-fold increase in selectivity for the reduction of CO₂ to CO with a high rate of 68.1 μmol h^-1 .