Dumbbell Plate-Shaped AIEgen-Based Luminescent MOF with High Quantum Yield as Self-Enhanced ECL Tags: Mechanism Insights and Biosensing Application

Finely-Tuning Chemiluminescent Color of CdTe Nanocrystals and Its Application for Near-Infrared Semi-Automatic Immunoassay

Chemiluminescence (CL), especially commercialized CL immunoassay (CLIA), is normally performed within the eye-visible region of the spectrum by exploiting the electronic-transition-related emission of the molecule luminophore. Herein, dual-stabilizers-capped CdTe nanocrystals (NCs) is employed as a model of nanoparticulated luminophore to finely tune the CL color with superior color purity. Initialized by oxidizing the CdTe NCs with potassium periodate (KIO4), intermediates of the reactive oxygen species (ROS) tend to charge CdTe NCs in both series-connection and parallel-connection routes and dominate the charge-transfer CL of CdTe NCs. The CdTe NCs/KIO4 system can exhibit color-tunable CL with the maximum emission wavelength shifted from 694 nm to 801 nm, and the red-shift span is over 100 nm. Both PL and CL of each of the CdTe NCs are bandgap-engineered; the change in the NCs surface state via CL reaction enables CL of each of the CdTe NCs to be red-shifted for ∼20 nm to PL, while the change in the NCs surface state via labeling CdTe NCs to secondary-antibody (Ab2) enables CL of the CdTe NCs-Ab2 conjugates to be red-shifted for another ∼20 nm to bare CdTe NCs. The CL of CdTe753-Ab2/KIO4 is ∼791 nm, which can perform near-infrared CL immunoassay and semi-automatically determined procalcitonin (PCT) on commercialized in vitro diagnosis (IVD) instruments.

Ultrasensitive detection of zearalenone based on electrochemiluminescent immunoassay with Zr-MOF nanoplates and Au@MoS2 nanoflowers

In this work, an effective competitive-type electrochemiluminescence (ECL) immunosensor was constructed for zearalenone determination by using Zr-MOF nanoplates as the ECL luminophore and Au@MoS2 nanoflowers as the substrate material. Zr-MOF have an ultra-thin sheet-like structure that accelerates the transfer of electrons, ions and co-reactant intermediates, which exhibited strong and stable anodic luminescence. The three-dimensional Au@MoS2 nanoflowers would form a thin film modification layer on the glassy carbon electrode (GCE). And its good electrical conductivity and higher specific surface area utilization further improving the sensitivity of the ECL immunosensor. Under the optimized conditions, the proposed immunosensor exhibited satisfactory stability, sensitivity and accuracy, and its ECL signal was proportional to the logarithm of ZEN concentration (0.0001-100 ng/mL) and the limit of detection (LOD) was 0.034 pg/mL. In addition, the results of recovery experiment acquired for wheat flour and pig urine samples further proved the feasibility of the immunosensor for the detection of real samples, indicating its potential for ultrasensitive detection of ZEN.

The luminescent principle and sensing mechanism of metal-organic framework for bioanalysis and bioimaging

Metal-organic frameworks (MOFs) porous material have obtained more and more attention during the past decade. Among various MOFs materials, luminescent MOFs with specific chemical characteristics and excellent optical properties have been regarded as promising candidates in the research of cancer biomarkers detection and bioimaging. Therefore, the latest advances and the principal biosensing and imaging strategies based on the luminescent MOFs were discussed in this review. The effective synthesis methods of luminescent MOFs were emphasized firstly. Subsequently, the luminescent principle of MOFs has been summarized. Furthermore, the luminescent MOF-based sensing mechanisms have been highlighted to provide insights into the design of biosensors. The designability of LMOFs was suitable for different needs of biorecognition, detection, and imaging. Typical examples of luminescent MOF in the various cancer biomarkers detection and bioimaging were emphatically introduced. Finally, the future outlooks and challenges of luminescent MOF-based biosensing systems were proposed for clinical cancer diagnosis.

The tightest self-assembled ruthenium metal-organic framework combined with proximity hybridization for ultrasensitive electrochemiluminescence analysis of paraquat

Metal-organic frameworks (MOFs), as porous materials, have great potential for exploring high-performance electrochemiluminescence (ECL) probes. However, the constrained applicability of MOFs in the realm of ECL biosensing is primarily attributed to their inadequate water stability, which consequently impairs the overall ECL efficiency. Herein, we developed a competitive ECL biosensor based on a novel tightest structural ruthenium-based organic framework emitter combining the proximity hybridization-induced catalytic hairpin assembly (CHA) strategy and the quenching effect between the Ru-MOF and ferrocene for detecting paraquat (PQ). Through a simple hydrothermal synthesis strategy, ruthenium and 2,2'-bipyrimidine (bpm) are head-to-head self-assembled to obtain a novel tightest structural Ru-MOF. Due to the metal-ligand charge-transfer (MLCT) effect between ruthenium and the bpm ligand and the connectivity between the internal chromophore units, the Ru-MOF exhibits strong ECL emissions. Meanwhile, the coordination-driven Ru-MOF utilizes strong metal-organic coordination bonds as building blocks, which effectively solves the problem of serious leakage of chromophores caused by water solubility. The sensitive analysis of PQ is realized in the range of 1 pg/mL to 1 ng/mL with a detection limit of 0.352 pg/mL. The tightest structural Ru-MOF driven by the coordination of ruthenium and bridging ligands (2,2'-bipyrimidine, bpm) provides new horizons for exploring high-performance MOF-based ECL probes for quantitative analysis of biomarkers.

Ultrasensitive Detection of SARS-CoV-2 Nucleocapsid Protein Based on Porphyrin-Based Metal-Organic Gels with Highly Efficient Electrochemiluminescence at Low Potential

Metal-organic gels (MOGs) are a new type of intelligent soft material, which are bridged by metal ions and organic ligands through noncovalent interactions. In this paper, we prepared highly stable P-MOGs, using the classical organic electrochemiluminescence (ECL) luminescence meso-tetra(4-carboxyphenyl)porphine as the organic ligand and Fe3+ as the metal ion. Surprisingly, P-MOGs can stably output ECL signals at a low potential. We introduced P-MOGs into the ECL resonance energy transfer strategy (ECL-RET) and constructed a quenched ECL immunosensor for the detection of the SARS-CoV-2 nucleocapsid protein (SARS-CoV-2-N). In the ECL-RET system, P-MOGs were used as energy donors, and Au@Cu2O@Fe3O4 were selected as energy acceptors. The ultraviolet-visible spectrum of Au@Cu2O@Fe3O4 partially overlaps with the ECL spectrum of P-MOGs, which can effectively touch off the ECL-RET behavior between the donors and receptors. Under the ideal experimental situation, the linear detection range of the SARS-CoV-2-N concentration was 10 fg/mL to 100 ng/mL, and the limit of detection was 1.5 fg/mL. This work has broad application prospects for porphyrin-MOGs in ECL sensing.

Europium Metal-Organic Framework with a Tetraphenylethylene-Based Ligand: A Dual-Mechanism Quenching Immunosensor for Enhanced Electrochemiluminescence via the Coordination Trigger

The effective applications of electrochemiluminescence (ECL) across various fields necessitate ongoing research into novel luminophores and ECL strategies. In this study, self-luminous flower-like nanocomposites (Eu-tcbpe-MOF) were prepared by coordination self-assembly using the aggregation-induced emission material 1,1,2,2-tetrakis(4-carboxyphenyl)ethylene (H4TCBPE) and Eu(III) ions as the precursors. Compared with the monomers and aggregates of H4TCBPE, Eu-tcbpe-MOF exhibits stronger ECL emission. Such enhanced electrochemiluminescence is due to coordination as the coordination-triggered electrochemiluminescence (CT-ECL) enhancement effect. In this study, a cubic-structured nanocomposite (Co9S8@Au@MoS2) was used as an efficient quencher, and a more sensitive ECL detection platform was achieved by two quenching mechanisms: resonance energy transfer and competitive consumption of coreactants. N,N-Diethylethanolamine (DBAE) was used as a coreactant, and DBAE has a faster electron transfer rate and stronger energy supply efficiency than the traditional anodoluminescent coreactant tripropylamine, which effectively improves the ECL signal intensity of Eu-tcbpe-MOF. Hence, a sandwich-type ECL immunosensor was prepared by employing a dual-quenching mechanism, utilizing Eu-tcbpe-MOF as the detection probe and Co9S8@Au@MoS2 as the quencher, achieving precise detection of carcinoembryonic antigen from 0.1 pg·mL-1 to 100 ng·mL-1 with a detection limit of 35.1 fg·mL-1.

A Controlled Release Aptasensor Utilizing AIE-Active MOFs as High-Efficiency ECL Nanoprobe for the Sensitive Detection of Adenosine Triphosphate

Improving the sensitivity in electrochemiluminescence (ECL) detection systems necessitates the integration of robust ECL luminophores and efficient signal transduction. In this study, we report a novel ECL nanoprobe (Zr-MOF) that exhibits strong and stable emission by incorporating aggregation-induced emission ligands into Zr-based metal-organic frameworks (MOFs). Meanwhile, we designed a high-performance signal modulator through the implementation of a well-designed controlled release system with a self-on/off function. ZnS quantum dots (QDs) encapsulated within the cavities of aminated mesoporous silica nanoparticles (NH2-SiO2) serve as the ECL quenchers, while adenosine triphosphate (ATP) aptamers adsorbed on the surface of NH2-SiO2 through electrostatic interaction act as "gatekeepers." Based on the target-triggered ECL resonance energy transfer between Zr-MOF and ZnS QDs, we establish a coreactant-free ECL aptasensor for the sensitive detection of ATP, achieving an impressive low detection limit of 0.033 nM. This study not only demonstrates the successful combination of ECL with controlled release strategies but also opens new avenues for developing highly efficient MOFs-based ECL systems.

Engineered Electrochemiluminescence Biosensors for Monitoring Heavy Metal Ions: Current Status and Prospects

Metal ion contamination has serious impacts on environmental and biological health, so it is crucial to effectively monitor the levels of these metal ions. With the continuous progression of optoelectronic nanotechnology and biometrics, the emerging electrochemiluminescence (ECL) biosensing technology has not only proven its simplicity, but also showcased its utility and remarkable sensitivity in engineered monitoring of residual heavy metal contaminants. This comprehensive review begins by introducing the composition, advantages, and detection principles of ECL biosensors, and delving into the engineered aspects. Furthermore, it explores two signal amplification methods: biometric element-based strategies (e.g., HCR, RCA, EDC, and CRISPR/Cas) and nanomaterial (NM)-based amplification, including quantum dots, metal nanoclusters, carbon-based nanomaterials, and porous nanomaterials. Ultimately, this review envisions future research trends and engineered technological enhancements of ECL biosensors to meet the surging demand for metal ion monitoring.

Bifunctional TiO2 Nanoflower-Induced H4TCBPE Aggregation Enhanced Electrochemiluminescence for an Ultrasensitive Assay of Organophosphorus

In this work, the aggregation-induced emission ligand 1,1,2,2-tetra(4-carboxylbiphenyl)ethylene (H4TCBPE) was rigidified in the Ti-O network to form novel electrochemiluminescence (ECL) emitter H4TCBPE-TiO2 nanospheres, which acted as an effective ECL emitter to construct an "on-off" ECL biosensor for ultrasensitive detection of malathion (Mal). H4TCBPE-TiO2 exhibited excellent ECL responses due to the Ti-O network that can restrict the intramolecular free motions within H4TCBPE and then reduce the nonradiative relaxation. Moreover, TiO2 can act as an ECL co-reaction accelerator to promote the generation of sulfate radical anion (SO4•-), which interacts with H4TCBPE in the Ti-O network to produce enhanced ECL response. In the presence of Mal, numerous ligated probes (probe 1 to probe 2, P1-P2) were formed and released by copper-free click nucleic acid ligation reaction, which then hybridized with hairpin probe 1 (H1)-modified H4TCBPE-TiO2-based electrode surface. The P1-P2 probes can initiate the target-assisted terminal deoxynucleoside transferase (TdTase) extended reaction to produce long tails of deoxyadenine with abundant biotin, which can load numerous streptavidin-functionalized ferrocenedicarboxylic acid polymer (SA-PFc), causing quenching of the ECL signal. Thus, the ultrasensitive ECL biosensor based on H4TCBPE-TiO2 ECL emitter and click chemistry-actuated TdTase amplification strategy presents a desirable range from 0.001 to 100 ng/mL and a detection limit low to 9.9 fg/mL. Overall, this work has paved an avenue for the development of novel ECL emitters, which has opened up new prospects for ECL biosensing.

Emerging Insights into the Use of Advanced Nanomaterials for the Electrochemiluminescence Biosensor of Pesticide Residues in Plant-Derived Foodstuff

Pesticides have an important role in rising the overall productivity and yield of agricultural foods by eliminating and controlling insects, pests, fungi, and various plant-related illnesses. However, the overuse of pesticides has caused pesticide pollution of water bodies and food products, along with disruption of environmental and ecological systems. In this regard, developing low-cost, simple, and rapid-detecting approaches for the accurate, rapid, efficient, and on-site screening of pesticide residues is an ongoing challenge. Electrochemiluminescence (ECL) possesses the benefits of great sensitivity, the capability to resolve several analytes using different emission wavelengths or redox potentials, and excellent control over the light radiation in time and space, making it a powerful strategy for sensing various pesticides. Cost-effective and simple ECL systems allow sensitive, selective, and accurate quantification of pesticides in agricultural fields. Particularly, the development and progress of nanomaterials, aptamer/antibody recognition, electric/photo-sensing, and their integration with electrochemiluminescence sensing technology has presented the hopeful potential in reporting the residual amounts of pesticides. Current trends in the application of nanoparticles are debated, with an emphasis on sensor substrates using aptamer, antibodies, enzymes, and molecularly imprinted polymers (MIPs). Different strategies are enclosed in labeled and label-free sensing along with luminescence determination approaches (signal-off, signal-on, and signal-switch modes). Finally, the recent challenges and upcoming prospects in this ground are also put forward.

Electrochemiluminescence resonance energy transfer between a Ru-ZnMOF self-enhanced luminophore and a double quencher ZnONF@PDA to detect NSE

The construction of advanced systems capable of accurately detecting neuron-specific enolase (NSE) is essential for rapidly diagnosing small-cell lung cancer. In this study, an electrochemiluminescence (ECL) resonance energy transfer immunosensor was proposed for the ultra-sensitive detection of NSE. The co-reactants C2O42- and Ru(bpy)32+ were integrated to form a self-enhanced ECL luminophore (Ru-ZnMOF) as the ECL donor. The abundant carboxyl functional groups of Ru-ZnMOF supported antibody 1 via an amidation reaction. Polydopamine-modified zinc dioxide nanoflowers, as ECL acceptors, inhibited Ru-ZnMOF ECL signaling. The linear range of NSE was 10 fg mL-1 to 100 ng mL-1 with a detection limit of 3.3 fg mL-1 (S/N = 3), which is suitably low for determining NSE in real samples.

Anisotropic flexibility and rigidification in a TPE-based Zr-MOFs with scu topology

Tetraphenylethylene (TPE)-based ligands are appealing for constructing metal-organic frameworks (MOFs) with new functions and responsiveness. Here, we report a non-interpenetrated TPE-based scu Zr-MOF with anisotropic flexibility, that is, Zr-TCPE (H4TCPE = 1,1,2,2-tetra(4-carboxylphenyl)ethylene), remaining two anisotropic pockets. The framework flexibility is further anisotropically rigidified by installing linkers individually at specific pockets. By individually installing dicarboxylic acid L1 or L2 at pocket A or B, the framework flexibility along the b-axis or c-axis is rigidified, and the intermolecular or intramolecular motions of organic ligands are restricted, respectively. Synergistically, with dual linker installation, the flexibility is completely rigidified with the restriction of ligand motion, resulting in MOFs with enhanced stability and improved separation ability. Furthermore, in situ observation of the flipping of the phenyl ring and its rigidification process is made by 2H solid-state NMR. The anisotropic rigidification of flexibility in scu Zr-MOFs guides the directional control of ligand motion for designing stimuli-responsive emitting or efficient separation materials.

Current Trends in Nanomaterials-Based Electrochemiluminescence Aptasensors for the Determination of Antibiotic Residues in Foodstuffs: A Comprehensive Review

Veterinary pharmaceuticals have been recently recognized as newly emerging environmental contaminants. Indeed, because of their uncontrolled or overused disposal, we are now facing undesirable amounts of these constituents in foodstuff and its related human health concerns. In this context, developing a well-organized environmental and foodstuff screening toward antibiotic levels is of paramount importance to ensure the safety of food products as well as human health. In this case, with the development and progress of electric/photo detecting, nanomaterials, and nucleic acid aptamer technology, their incorporation-driven evolving electrochemiluminescence aptasensing strategy has presented the hopeful potentials in identifying the residual amounts of different antibiotics toward sensitivity, economy, and practicality. In this context, we reviewed the up-to-date development of ECL aptasensors with aptamers as recognition elements and nanomaterials as the active elements for quantitative sensing the residual antibiotics in foodstuff and agriculture-related matrices, dissected the unavoidable challenges, and debated the upcoming prospects.

Intramolecular Enhancement of a Zirconium-Based Metal-Organic Framework for Coordination-Induced Electrochemiluminescence Bleomycin Analysis

It is significantly vital to develop a convenient assay method in clinical treatment due to an atypically low abundance (∼5 μM) of bleomycin (BLM) used in clinics. Herein, an electrochemiluminescence (ECL) biosensor using a zirconium-based metal-organic frameworks (Zr-MOFs) as an intramolecular coordination-induced electrochemiluminescence (CIECL) emitter was proposed for sensitive detection of BLM. Zr-MOFs were synthesized using Zr(IV) as metal ions and 4,4',4″-nitrilotribenzoic acid (H₃NTB) as ligands for the first time. The H₃NTB ligand not only acts as coordination units bonding with Zr(IV) but functions as a coreactant to enhance ECL efficiency rooted in its tertiary nitrogen atoms. Specifically, a long guanine-rich (G-rich) single-stranded DNA (ssDNA) was released by the target-BLM-controlled DNA machine that could perform π-π stacking with another G-quadruplex, ssDNA-rhodamine B (S-RB), by shearing DNA's fixed sites 5'-GC-3' and the auxiliary role of exonuclease III (Exo III). Finally, due to the quenching effect of rhodamine B, a negative correlation trend was obtained between ECL intensity and BLM concentration in the range from 5.0 nM to 50 μM and the limit of detection was 0.50 nM. We believe that it is a promising approach to guide the preparation of CIECL-based functional materials and establishment of analytical methods.

Enzyme coordination conferring stable monodispersity of diverse metal–organic frameworks for photothermal/starvation therapy

The agglomeration of metal-organic frameworks (MOFs) has long been a problem, and achieving stable monodispersity in water remains a great challenge. This paper reports a universal strategy that functionalizes MOFs by using an endogenous bioenzyme namely glucose oxidase (GOx), to achieve stable water monodispersity, and integrates it as a highly efficient nanoplatform for cancer synergistic therapy. Phenolic hydroxyl groups in GOx chain confers robust coordination interactions with MOFs, which not only endows stable monodispersion in water, but also provides many reactive sites for further modification. Silver nanoparticles are uniformly deposited onto MOFs@GOx to achieve high conversion efficiency from near-infrared light to heat, resulting in an effective starvation and photothermal synergistic therapy model. In vitro and in vivo experiments confirm excellent therapeutic effect at very low doses without using any chemotherapeutics. In addition, the nanoplatform generates large amounts of reactive oxygen species, induces heavy cell apoptosis, and demonstrates the first experimental example to effectively inhibit cancer migration. Our universal strategy enables stable monodispersity of various MOFs via GOx functionalization and establishes a non-invasive platform for efficient cancer synergistic therapy.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

High-Performance Electrochemiluminescence of a Coordination-Driven J-Aggregate K-PTC MOF Regulated by Metal-Phenolic Nanoparticles for Biomarker Analysis

The elimination of aggregation-caused quenching of polycyclic aromatic hydrocarbons by metal-ligand coordination is of immense scientific interest in solid-state electrochemiluminescence (ECL) sensing. Herein potassium ion (K⁺)-mediated J-aggregate K-PTC MOF (PTCA, perylene-3,4,9,10-tetracarboxylic) was synthesized and employed to formulate an ECL immunosensor for biomarker detection. The coordination-driven aggregates are arranged in an end-to-end side mode, which overcomes the aggregation-caused quenching related to PTCA concentration. Compared with PTCA, K-PTC MOF shows a more stable ECL emission with an unprecedented red shift to 718 nm and is equipped with ECL activity for analytical applications at a voltage of -1.1 V. Considering the requirements of accurate detection, metal-phenolic bioactive nanoparticles (MPNPs) were synthesized for the construction of a sandwich sensing platform to realize the steady-state regulation of ECL. As proof of applicability, a constructive experiment was carried out with neuron-specific enolase (NSE), a marker of small cell lung cancer (SCLC), as a targeted analyte. With optimal requirements, the configuration can provide a detection range of 10 pg/mL to 50 ng/mL and a detection limit of 7.4 pg/mL, accompanied by sufficient practical analytical performance. Collectively, this paradigm provides a deeper understanding of the ECL characteristics of coordination-driven J-aggregation and provides more possibilities for the development of ECL patterns based on luminescent metal-organic frameworks.

A light-operated dual-mode method for neuroblastoma diagnosis based on a Tb-MOF: from biometabolite detection to logic devices

Tb-DBA can not only serve as a light-operated dual-mechanism driven platform to detect VMA (an early pathological feature of neuroblastoma), but can also produce a different fluorescence response to epinephrine (EP, the metabolic precursor of VMA).

Dual-Mechanism Quenching of Electrochemiluminescence Immunosensor Based on a Novel ECL Emitter Polyoxomolybdate-Zirconia for 17β-Estradiol Detection

The exploration of novel electrochemiluminescence (ECL) reagents has been a breakthrough work in ECL immunoassay. In this work, the ECL properties of polyoxomolybdate-zirconia (POM-ZrO₂) were discovered for the first time and their luminescence mechanism was initially explored. Virgulate POM-ZrO₂ was synthesized from phosphomolybdic acid hydrate and zirconium oxychloride by solvothermal method, which achieved intense and stabilized cathode ECL emission at a negative potential. Polyaniline@Au nanocrystals (PANI@AuNPs) as the executor of the dual-mechanism quenching strategy were used to reduce the output signal. The quenching efficiency was significantly enhanced by the dual mechanisms of ECL energy transfer and electron transfer. Specifically, PANI@AuNPs can serve as an energy receptor to absorb the energy emitted by POM-ZrO₂ (energy donor), while the appropriate energy level can be regarded as the condition for electron transfer to quench the ECL intensity of POM-ZrO₂. Herein, the proposed dual-mechanism quenching strategy was applied to the immunoassay of 17β-estradiol by constructing a competitive immunosensor. As expected, the immunosensor demonstrated favorable analytical performance and a wide sensing range from 0.01 pg/mL to 200 ng/mL. Hence, it provides a novel method for the sensitive analysis of other biomolecules, such as disease markers and environmental estrogens.

Highly Retentive, Anti-Interference, and Covert Individual Marking Taggant with Exceptional Skin Penetration

The development of high-performance individual marking taggants is of great significance. However, the interaction between taggant and skin is not fully understood, and a standard for marking taggants has yet to be realized. To achieve a highly retentive, anti-interference, and covert individual marking fluorescent taggant, Mn²⁺ -doped NaYF₄ :Yb/Er upconversion nanoparticles (UCNPs), are surface-functionalized with polyethyleneimine (PEI) to remarkably enhance the interaction between the amino groups and skin, and thus to facilitate the surface adhesion and chemical penetration of the taggant. Electrostatic interaction between PEI₆₀₀ -UCNPs and skin as well as remarkable penetration inside the epidermis is responsible for excellent taggant retention capability, even while faced with robust washing, vigorous wiping, and rubbing for more than 100 cycles. Good anti-interference capability and reliable marking performance in real cases are ensured by an intrinsic upconversion characteristic with a distinct red luminescent emission under 980 nm excitation. The present methodology is expected to shed light on the design of high-performance individual marking taggants from the perspective of the underlying interaction between taggant and skin, and to help advance the use of fluorescent taggants for practical application, such as special character tracking.

Highly Efficient Aggregation-Induced Electrochemiluminescence of Al(III)-Cbatpy Metal-Organic Gels Obtained by Ultrarapid Self-Assembly for a Biosensing Application

Aggregation-induced electrochemiluminescence (AIECL) has attracted extensive interest due to the significant increase in ECL response by restricting free intramolecular rotation and torsion, but traditional AIECL emitters suffer from limited ECL efficiency, high cost, and complex synthetic steps, dramatically limiting their applications. Herein, novel Al(III)-Cbatpy metal-organic gels (Al(III)-Cbatpy-MOGs) with nanofiber morphology and ultrarapid coordination of Al³⁺ and 4'-carboxylic acid-2,2':6',2″-terpyridine (Cbatpy) are developed, which demonstrates an excellent AIECL enhancement behavior far beyond that reported in ECL supramolecular gels. In view of the strong affinity of N and O atoms in Cbatpy toward Al³⁺, Al(III)-Cbatpy-MOGs with high viscosity and stability can be assembled in one step within about 15 s, easily conquering the main predicaments of current AIECL emitters: complicated synthesis steps and poor film formation. Impressively, the ECL efficiency of Al(III)-Cbatpy-MOGs with superemission is about 20 times higher than that of individual Cbatpy molecules, which is attributed to the aggregation of the organic ligand Cbatpy restricting intramolecular rotation and torsion to reduce nonradiative relaxation. Furthermore, compared with traditional metal complexes, Al(III)-Cbatpy-MOGs show the benefits of remarkable biocompatibility and low cost without the involvement of any organic solvents, noble metals, and rare metals. As proof, a "signal-off" sensing platform based on an Al(III)-Cbatpy-MOGs/S₂O₈^2- system was constructed for the sensitive detection of dopamine (DA) with a low detection limit of 0.34 nM. This strategy provides a novel method to prepare cheap metal-organic gels as a highly efficient AIECL emitter, which is promising as a luminescent molecular device and biosensor for clinical diagnostic applications.

Boron Carbon Nitride Nanosheets-Ru Nanocomposite Self-Enhancement Electrochemiluminescence Emitter with a Three-Dimensional DNA Network Structure as a Signal Amplifier for Ultrasensitive Detection of TK1 mRNA

In this study, a neoteric self-enhanced nanocomposite boron carbon nitride nanosheets (BCN NSs)-Ru obtained by chemical crosslinking between boron carbon nitride nanosheets (BCN NSs) and tris (4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium(II) dichloride (Ru(dcbpy)₃Cl₂) was used as an emitter to build an electrochemiluminescence (ECL) biosensor for ultrasensitive detection of the cancer marker human thymidine kinase 1 (TK1) mRNA. Importantly, the self-enhanced BCN NSs-Ru could exhibit strong ECL emission because boron radicals and amine groups derived from BCN NSs could significantly enhance the ECL response of Ru(dcbpy)₃Cl₂, which avoided the defects of the long electron transfer path and large energy loss between the emitter and coreactant in the traditional coreaction ECL system. Impressively, in the presence of target TK1 mRNA, three-dimensional DNA network structure-labeled numerous ferrocene probes could be assembled to quickly quench the ECL signal of BCN NSs-Ru, resulting in improved biosensor sensitivity. The obtained "on-off" biosensor showed excellent stability and high sensitivity with a detection limit of 32.3 aM. In general, the developed strategy provided a new biosensing way for ultrasensitive detection of biomolecules in early disease diagnosis.

Progress and Prospects of Electrochemiluminescence Biosensors Based on Porous Nanomaterials

Porous nanomaterials have attracted much attention in the field of electrochemiluminescence (ECL) analysis research because of their large specific surface area, high porosity, possession of multiple functional groups, and ease of modification. Porous nanomaterials can not only serve as good carriers for loading ECL luminophores to prepare nanomaterials with excellent luminescence properties, but they also have a good electrical conductivity to facilitate charge transfer and substance exchange between electrode surfaces and solutions. In particular, some porous nanomaterials with special functional groups or centered on metals even possess excellent catalytic properties that can enhance the ECL response of the system. ECL composites prepared based on porous nanomaterials have a wide range of applications in the field of ECL biosensors due to their extraordinary ECL response. In this paper, we reviewed recent research advances in various porous nanomaterials commonly used to fabricate ECL biosensors, such as ordered mesoporous silica (OMS), metal–organic frameworks (MOFs), covalent organic frameworks (COFs) and metal–polydopamine frameworks (MPFs). Their applications in the detection of heavy metal ions, small molecules, proteins and nucleic acids are also summarized. The challenges and prospects of constructing ECL biosensors based on porous nanomaterials are further discussed. We hope that this review will provide the reader with a comprehensive understanding of the development of porous nanomaterial-based ECL systems in analytical biosensors and materials science.

Electrochemiluminescent sensor based on an aggregation-induced emission probe for bioanalytical detection

In recent years, with the rapid development of electrochemiluminescence (ECL) sensors, more luminophores have been designed to achieve high-throughput and reliable analysis. Impressively, after the proposed fantastic concept of "aggregation-induced electrochemiluminescence (AIECL)" by Cola, the application of AIECL emitters provides more abundant choices for the further improvement of ECL sensors. In this review, we briefly report the phenomenon, principle and representative applications of aggregation-induced emission (AIE) and AIECL emitters. Moreover, it is noteworthy that the cases of AIECL sensors for bioanalytical detection are summarized in detail, from 2017 to now. Finally, inspired by the applications of AIECL emitters, relevant prospects and challenges for AIECL sensors are proposed, which is of great significance for exploring more advanced bioanalytical detection technology.

Bifunctional Pdots-Based Novel ECL Nanoprobe with Qualitative and Quantitative Dual Signal Amplification Characteristics for Trace Cytokine Analysis

In this work, a novel methodology to design bifunctional ECL-luminophores with self-enhanced and TSA-amplified characteristics was proposed for improving the sensing performance of ECL-immunosensor toward trace cytokine analysis. Thanks to the qualitative- and quantitative- dual signal amplification technique, the as-prepared ECL biosensor demonstrated excellent detection performance. By analyzing the prospective cytokine biomarkers (IL-6), the ECL immunosensor exhibited a broad examination range with quite low detection limit and quite high selectivity, which was far superior to commercial ELISA kits and ever reported works. In particular, the novel ECL nanoprobe developed here could also be applied to monitor other immune toxicities or disease-related cytokines by using the respective antibodies corresponding to these targets. Moreover, the concept and construction strategy of self-amplified ECL-luminophores presented here could be further extended to design a series of Pdots-derived multicolored ECL probes to meet the needs of multipathway detection applications.

Self-assembled nanoplatforms with ZIF-8 as a framework for FRET-based glutathione sensing in biological samples

A nanoprobe was constructed by embedding QDs and a rhodamine B derivative (RBD) into ZIF-8. Then, the ultraviolet absorption of RBD that reacted with glutathione can overlap with the emission spectrum of the QDs, causing FRET-based glutathione sensing.