Air-Stable Protective Layers for Lithium Anode Achieving Safe Lithium Metal Batteries

Ruthenium single-atom doping-driven modulation of Co3O4 spinel tetrahedral site 3d-orbital occupancy in lithium-oxygen batteries

Metal single-atom catalysts have attracted widespread attention in the field of lithium-oxygen batteries due to their unique active sites, high catalytic selectivity, and near total atomic utilization efficiency. Isolated metal atoms not only serve as the active sites themselves, but also function as modulators, reversely regulating the surface electronic structure of the support to enhance its inherent electrocatalytic activities. Despite the potential of isolated metal atom-driven active sites, understanding the structure-activity relationship remains a challenge. In this study, we present a ruthenium single-atom doping-driven cost-effective and durable tricobalt tetroxide electrocatalyst with excellent oxygen electrode electrocatalytic activity. The lithium-oxygen battery with this catalyst as the oxygen electrode demonstrates high performance, achieving a capacity of up to 25 000 mA h g-1 and maintaining good stability over 400 cycles at a current density of 100 mA g-1. This improvement is attributed to the exquisite control of the morphology and structure of the discharge product, lithium peroxide. The aresults of physical characterization and theoretical calculations reveal that isolated ruthenium atoms bond with the tetrahedral cobalt site, resulting in spin polarization enhancement and rearrangement of d orbital energy levels in cobalt. This rearrangement reduces the dz2 orbital occupancy and promotes their transfer to the octahedral cobalt site, thereby enhancing its adsorption capacity for the oxygen-containing intermediates, and ultimately increasing the electrocatalytic activity of the oxygen evolution reaction. This work presents an innovative strategy to regulate the catalytic activity of metal oxides by introducing another metal single atom.

Engineering dual-crystal configurations in perovskite oxides boosts electrocatalysis of lithium-oxygen batteries

Sculpting crystal configurations can vastly affect the charge and orbital states of electrocatalysts, fundamentally determining the catalytic activity of lithium-oxygen (Li-O2) batteries. However, the crucial role of crystal configurations in determining the electronic states has usually been neglected and needs to be further examined. Herein, we introduce orthorhombic and trigonal system into 0.5La0.6Sr0.4MnO3-0.5LaMn0.6Co0.4O3 (LSMCO) by selectively incorporating Sr and Co cations into the LaMnO3 framework during the sol-gel process, which is used to explore the relationship among crystal structure, electronic states and catalytic performance. Based on both experimental and theoretical calculations, the dual-crystal configurations induce strong lattice distortion, which promotes MnO6 octahedra vibration and shortened MnO bonds. Furthermore, the suppressed Jahn-Teller distortion weakens the orbital arrangement and accelerates the charge delocalization, leading to the conversion of Mn3+ to Mn4+ and optimized electronic states. Ultimately, this resulted in optimized Mn 3d and O 2p orbital hybridization and activated lattice oxygen function, leading to a significant improvement in electrocatalytic activity. The LSMCO catalyzed Li-O2 battery achieves enhanced discharge capacity of 14498.7 mAh/g and cycling stability of 258 cycles. This work highlights the significance of inner structure and presents a feasible strategy for engineering crystal configurations to boost electrocatalysis of Li-O2 batteries.

Sn Bulk Phase Doping and Surface Modification on Ti4 O7 for Oxygen Reduction to Hydrogen Peroxide

Developing stable and highly selective two-electron oxygen reduction reaction (2e- ORR) electrocatalysts for producing hydrogen peroxide (H2 O2 ) is considered a major challenge to replace the anthraquinone process and achieve a sustainable green economy. Here, we doped Sn into Ti4 O7 (D-Sn-Ti4 O7 ) by simple polymerization post-calcination method as a high-efficiency 2e- ORR electrocatalyst. In addition, we also applied plain calcination after the grinding method to load Sn on Ti4 O7 (L-Sn-Ti4 O7 ) as a comparison. However, the performance of L-Sn-Ti4 O7 is far inferior to that of the D-Sn-Ti4 O7 . D-Sn-Ti4 O7 exhibits a starting potential of 0.769 V (versus the reversible hydrogen electrode, RHE) and a high H2 O2 selectivity of 95.7 %. Excitingly, the catalyst can maintain a stable current density of 2.43 mA ⋅ cm-2 for 3600 s in our self-made H-type cell, and the cumulative H2 O2 production reaches 359.2 mg ⋅ L-1 within 50,000 s at 0.3 V. The performance of D-Sn-Ti4 O7 is better than that of the non-noble metal 2e- ORR catalysts reported so far. The doping of Sn not only improves the conductivity but also leads to the lattice distortion of Ti4 O7 , further forming more oxygen vacancies and Ti3+ , which greatly improves its 2e- ORR performance compared with the original Ti4 O7 . In contrast, since the Sn on the surface of L-Sn-Ti4 O7 displays a synergistic effect with Tin+ (3≤n≤4) of Ti4 O7 , the active center Tin+ dissociates the O=O bond, making it more inclined to 4e- ORR.

Recent Progress in Hot Spot Regulated Strategies for Catalysts Applied in Li-CO2 Batteries

As a high energy density power system, lithium-carbon dioxide (Li-CO2 ) batteries play an important role in addressing the fossil fuel crisis issues and alleviating the greenhouse effect. However, the sluggish transformation kinetic of CO2 and the difficult decomposition of discharge products impede the achievement of large capacity, small overpotential, and long life span of the batteries, which require exploring efficient catalysts to resolve these problems. In this review, the main focus is on the hot spot regulation strategies of the catalysts, which include the modulation of the active sites, the designing of microstructure, and the construction of composition. The recent progress of promising catalysis with hot spot regulated strategies is systematically addressed. Critical challenges are also presented and perspectives to provide useful guidance for the rational design of highly efficient catalysts for practical advanced Li-CO2 batteries are proposed.

Artificial bi-functional layers promoting Zn2+ desolvation and homogeneous deposition for reversible zinc metal anodes

Rechargeable aqueous zinc-ion hybrid supercapacitors (ZHSs) are drawing extensive attention because of their cost-effectiveness and diminished safety hazards. Nevertheless, large-scale application of ZHSs has been hindered by the severe side reactions and rampant dendrites growth on the surface of Zn metal anodes. Herein, we propose a three-dimensional organic-inorganic composite frame material as an artificial bi-functional layer coated on the zinc foil, featuring nitrogenous functional groups with zincophilicity (abbreviated as NCFM@Zn). The nitrogen (N) site's strong adsorption capacity and synergistic effect of the sub-nanopore size promote rapid desolvation of zinc ions and reduce side reactions, while also prolonging galvanized nucleation's Sand's time and allowing for even nucleation. Moreover, the uniform distribution of N on the layer results in homogeneous zinc ions flux and supports consistent zinc plating while inhibiting dendrites generation. As a result of this unique artificial bi-functional layer, symmetric Zn cells can survive 2500 h at 2.5 mA cm-2. High-areal-capacity zinc||activated carbon hybrid supercapacitors also demonstrate 20,000 cycles at high Coulombic efficiency, thus highlighting the utter convenience and potential of this strategy for modifying rechargeable metal hybrid supercapacitor surfaces.

Nonflammable Polyfluorides-Anchored Quasi-Solid Electrolytes for Ultra-Safe Anode-Free Lithium Pouch Cells without Thermal Runaway

The safe operation of rechargeable batteries is crucial because of numerous instances of fire and explosion mishaps. However, battery chemistry involving metallic lithium (Li) as the anode is prone to thermal runaway in flammable organic electrolytes under abusive conditions. Herein, an in situ encapsulation strategy is proposed to construct nonflammable quasi-solid electrolytes through the radical polymerization of a hexafluorobutyl acrylate (HFBA) monomer and a pentaerythritol tetraacrylate (PETEA) crosslinker. The quasi-solid system eliminates the inherent flammability of ether electrolytes with zero self-extinguishing time owing to the gas-phase radical capturing ability of HFBA. Additionally, the graphitized carbon layer generated during the decomposition of PETEA at high temperatures obstructs the heat and oxygen required for combustion. When coupled with Au-modified reduced graphene oxide anodic current collectors and lithium sulfide cathodes, the assembled anode-free Li-metal cell based on the quasi-solid electrolyte exhibits no signs of cell expansion or gas generation during cycling, and thermal runaway is eliminated under multiple mechanical, electrical, and thermal abuse scenarios and even rigorous strikes. This nonflammable quasi-solid configuration with gas- and condensed-phase flame-retardant mechanisms can drive a technological leap in anode-free Li-metal pouch cells and secure the practical applications necessary to power this society in a safe manner.

Fabrication of CoSe2/CoP with rich selenium- and phosphorus-vacancies and heterogeneous interfaces for asymmetric supercapacitors

CoSe2/CoP with rich Se- and P-vacancies and heterogeneous interfaces (v-CoSe2/CoP) is grown on the surface of nickel foam via a two-step strategy: electrodeposition and NaBH4 reduction, which can be used as the cathode material in asymmetric supercapacitors. The SEM characterization reveals the honeycomb-like structure of the v-CoSe2/CoP, and the results of EPR, XPS and HRTEM reveal the existence of anionic vacancies and heterogeneous interfaces in the v-CoSe2/CoP. The as-fabricated v-CoSe2/CoP exhibits high specific capacitance (3206 mF cm-2 at 1.0 mA cm-2) and cyclic stability (91 % capacitance retention after 2000 cycles). An asymmetric supercapacitor is assembled by using the v-CoSe2/CoP and activated carbon (AC) as cathode and anode materials, respectively, which displays a high energy density of 40.6 Wh kg-1 at the power density of 211.5 W kg-1. The outstanding electrochemical performances of the v-CoSe2/CoP might be ascribed to the synergistic effects of Se- and P-vacancies and the heterogeneous interfaces in the v-CoSe2/CoP.

Scalable fabrication of ultra-fine lithiophilic nanoparticles encapsulated in soft buffered hosts for long-life anode-free Li2S-based cells

Minimizing the amount of metallic lithium (Li) to zero excess to achieve an anode-free configuration can help achieve safer, higher energy density, and more economical Li metal batteries. Nevertheless, removal of excess Li creates challenges for long-term cycling performance in Li metal batteries due to the lithiophobic copper foils as anodic current collectors. Here, we improve the long-term cycling performance of anode-free Li metal batteries by modifying the anode-free configuration. Specifically, a lithiophilic Au nanoparticle-anchored reduced graphene oxide (Au/rGO) film is used as an anodic modifier to reduce the Li nucleation overpotential and inhibit dendrite growth by forming a lithiophilic LixAu alloy and solid solution, which is convincingly evidenced by density functional theory calculations and experimentally. Meanwhile, the flexible rGO film can also act as a buffer layer to endure the volume expansion during repeated Li plating/stripping processes. In addition, the Au/rGO film promotes a homogeneous distribution of the electric field over the entire anodic surface, thus ensuring a uniform deposition of Li during the electrodeposition process, which is convincingly evidenced by finite element simulations. As expected, the Li||Au/rGO-Li half-cell shows a highly stable long-term cycling performance for at least 500 cycles at 0.5 mA cm-2 and 0.5 mA h cm-2. A Li2S-based anode-free full cell allows achieving a stable operation life of up to 200 cycles with a capacity retention of 63.3%. This work provides a simple and scalable fabrication method to achieve anode-free Li2S-based cells with high anodic interface stability and a long lifetime.

Fabrication and Characterization of 2D Layered Perovskites with a Gradient Band Gap

Vertical gradient band-gap heterostructures of two-dimensional (2D) layered perovskites have attracted considerable research interest due to their superior optoelectronic properties and demonstrated potential for use in optical devices. However, its fabrication has been challenging. In this investigation, 2D Ruddlesden-Popper mixed halide perovskite single crystals with a vertical gradient band gap were synthesized by using a solid-state halide diffusion process. X-ray diffraction (XRD) and scanning electron microscopy (SEM) measurements after diffusion confirm that the crystalline and morphology remain intact. The transmittance and photoluminescence (PL) spectra show the formation of a vertical gradient band gap that is ascribed to gradient halide distribution through halide intermixing. The mixed halide crystal exhibits high stability with completely suppressed phase segregation in the time-dependent PL measurement. The time-resolved photoluminescence (TRPL) spectra prove that the mixed halide sample has an enhanced carrier transport due to the Förster resonance energy transfer (FRET) effect. Besides, the halide diffusion behavior is found to be different from the previously proposed "layer-by-layer" diffusion model in exfoliated crystals. The gradient band-gap structure is critical for various applications in which vertical carrier transport is demanded.

N, F-enriched inorganic/organic composite interphases to stabilize lithium metal anodes for long-life anode-free cells

The practical application of lithium metal batteries is considered to be one of the most promising successors for lithium-ion batteries due to their ability to meet the high-energy storage demands of modern society. However, their application is still hindered by the unstable solid electrolyte interphase (SEI) and uncontrollable dendrite growth. In this study, we propose a robust composite SEI (C-SEI) that consists of a fluorine doped boron nitride (F-BN) inner layer and an organic polyvinyl alcohol (PVA) outer layer. Both theoretical calculations and experimental results demonstrate that the F-BN inner layer induces the formation of favourable components (LiF and Li₃N) at the interface, promoting rapid ionic transport and inhibiting electrolyte decomposition. The PVA outer layer acts as a flexible buffer in the C-SEI, ensuring the structural integrity of the inorganic inner layer during lithium plating and stripping. The C-SEI modified lithium anode shows a dendrite-free performance and stable cycle over 1200 h, with an ultralow overpotential (15 mV) at 1 mA cm^-2 in this study. This novel approach also enhances the stability of capacity retention rate by 62.3% after 100 cycles even in anode-free full cells (C-SEI@Cu||LFP). Our findings suggest a feasible strategy for addressing the instability inherent in SEI, showing great prospects for the practical application of lithium metal batteries.

Correlating Solid Electrolyte Interphase Composition with Dendrite-Free and Long Life-Span Lithium Metal Batteries via Advanced Characterizations and Simulations

Lithium metal anode attracts great attention because of its high specific capacity and low redox potential. However, the uncontrolled dendrite growth and its infinite volume expansion during cycling are extremely detrimental to the practical application. The formation of a solid electrolyte interphase (SEI) plays a decisive role in the behavior of lithium deposition/dissolution during electrochemical processing. Clarifying the essential relationship between SEI and battery performance is a priority. Research in SEI is accelerated in recent years by the use of advanced simulation tools and characterization techniques. The chemical composition and micromorphology of SEIs with various electrolytes are analyzed to clarify the effects of SEI on the Coulombic efficiency and cycle life. In this review, the recent research progress focused on the composition and structure of SEI is summarized, and various advanced characterization techniques applied to the investigation of SEI are discussed. The comparisons of the representative experimental results and theoretical models of SEI in lithium metal batteries (LMBs) are exhibited, and the underneath mechanisms of interaction between SEI and the electrochemical properties of the cell are highlighted. This work offers new insights into the development of safe LMBs with higher energy density.

Application of Inorganic Quantum Dots in Advanced Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries have emerged as one of the most attractive alternatives for post-lithium-ion battery energy storage systems, owing to their ultrahigh theoretical energy density. However, the large-scale application of Li-S batteries remains enormously problematic because of the poor cycling life and safety problems, induced by the low conductivity , severe shuttling effect, poor reaction kinetics, and lithium dendrite formation. In recent studies, catalytic techniques are reported to promote the commercial application of Li-S batteries. Compared with the conventional catalytic sites on host materials, quantum dots (QDs) with ultrafine particle size (<10 nm) can provide large accessible surface area and strong polarity to restrict the shuttling effect, excellent catalytic effect to enhance the kinetics of redox reactions, as well as abundant lithiophilic nucleation sites to regulate Li deposition. In this review, the intrinsic hurdles of S conversion and Li stripping/plating reactions are first summarized. More importantly, a comprehensive overview is provided of inorganic QDs, in improving the efficiency and stability of Li-S batteries, with the strategies including composition optimization, defect and morphological engineering, design of heterostructures, and so forth. Finally, the prospects and challenges of QDs in Li-S batteries are discussed.