In vitro and ex vivo systems at the forefront of infection modeling and drug discovery

Exploring ex vivo biofilm dynamics: consequences of low ampicillin concentrations on the human oral microbiome

Prolonged exposure to antibiotics at low concentration can promote processes associated with bacterial biofilm formation, virulence and antibiotic resistance. This can be of high relevance in microbial communities like the oral microbiome, where commensals and pathogens share a common habitat and where the total abundance of antibiotic resistance genes surpasses the abundance in the gut. Here, we used an ex vivo model of human oral biofilms to investigate the impact of ampicillin on biofilm viability. The ecological impact on the microbiome and resistome was investigated using shotgun metagenomics. The results showed that low concentrations promoted significant shifts in microbial taxonomic profile and could enhance biofilm viability by up to 1 to 2-log. For the resistome, low concentrations had no significant impact on antibiotic resistance gene (ARG) diversity, while ARG abundance decreased by up to 84%. A positive correlation was observed between reduced microbial diversity and reduced ARG abundance. The WHO priority pathogens Streptococcus pneumoniae and Staphylococcus aureus were identified in some of the samples, but their abundance was not significantly altered by ampicillin. Most of the antibiotic resistance genes that increased in abundance in the ampicillin group were associated with streptococci, including Streptococcus mitis, a well-known potential donor of ARGs to S. pneumoniae. Overall, the results highlight the potential of using the model to further our understanding of ecological and evolutionary forces driving antimicrobial resistance in oral microbiomes.

Vasculature-on-a-chip technologies as platforms for advanced studies of bacterial infections

Bacterial infections frequently occur within or near the vascular network as the vascular network connects organ systems and is essential in delivering and removing blood, essential nutrients, and waste products to and from organs. In turn, the vasculature plays a key role in the host immune response to bacterial infections. Technological advancements in microfluidic device design and development have yielded increasingly sophisticated and physiologically relevant models of the vasculature including vasculature-on-a-chip and organ-on-a-chip models. This review aims to highlight advancements in microfluidic device development that have enabled studies of the vascular response to bacteria and bacterial-derived molecules at or near the vascular interface. In the first section of this review, we discuss the use of parallel plate flow chambers and flow cells in studies of bacterial adhesion to the vasculature. We then highlight microfluidic models of the vasculature that have been utilized to study bacteria and bacterial-derived molecules at or near the vascular interface. Next, we review organ-on-a-chip models inclusive of the vasculature and pathogenic bacteria or bacterial-derived molecules that stimulate an inflammatory response within the model system. Finally, we provide recommendations for future research in advancing the understanding of host-bacteria interactions and responses during infections as well as in developing innovative antimicrobials for preventing and treating bacterial infections that capitalize on technological advancements in microfluidic device design and development.

In vitro modelling of bacterial pneumonia: a comparative analysis of widely applied complex cell culture models

Bacterial pneumonia greatly contributes to the disease burden and mortality of lower respiratory tract infections among all age groups and risk profiles. Therefore, laboratory modelling of bacterial pneumonia remains important for elucidating the complex host-pathogen interactions and to determine drug efficacy and toxicity. In vitro cell culture enables for the creation of high-throughput, specific disease models in a tightly controlled environment. Advanced human cell culture models specifically, can bridge the research gap between the classical two-dimensional cell models and animal models. This review provides an overview of the current status of the development of complex cellular in vitro models to study bacterial pneumonia infections, with a focus on air-liquid interface models, spheroid, organoid, and lung-on-a-chip models. For the wide scale, comparative literature search, we selected six clinically highly relevant bacteria (Pseudomonas aeruginosa, Mycoplasma pneumoniae, Haemophilus influenzae, Mycobacterium tuberculosis, Streptococcus pneumoniae, and Staphylococcus aureus). We reviewed the cell lines that are commonly used, as well as trends and discrepancies in the methodology, ranging from cell infection parameters to assay read-outs. We also highlighted the importance of model validation and data transparency in guiding the research field towards more complex infection models.

Examining Chronic Inflammation, Immune Metabolism, and T Cell Dysfunction in HIV Infection

Chronic Human Immunodeficiency Virus (HIV) infection remains a significant challenge to global public health. Despite advances in antiretroviral therapy (ART), which has transformed HIV infection from a fatal disease into a manageable chronic condition, a definitive cure remains elusive. One of the key features of HIV infection is chronic immune activation and inflammation, which are strongly associated with, and predictive of, HIV disease progression, even in patients successfully treated with suppressive ART. Chronic inflammation is characterized by persistent inflammation, immune cell metabolic dysregulation, and cellular exhaustion and dysfunction. This review aims to summarize current knowledge of the interplay between chronic inflammation, immune metabolism, and T cell dysfunction in HIV infection, and also discusses the use of humanized mice models to study HIV immune pathogenesis and develop novel therapeutic strategies.

Unravelling host-pathogen interactions by biofilm infected human wound models

Approximately 80 % of persistent wound infections are affected by the presence of bacterial biofilms, resulting in a severe clinical challenge associated with prolonged healing periods, increased morbidity, and high healthcare costs. Unfortunately, in vitro models for wound infection research almost exclusively focus on early infection stages with planktonic bacteria. In this study, we present a new approach to emulate biofilm-infected human wounds by three-dimensional human in vitro systems. For this purpose, a matured biofilm consisting of the clinical key wound pathogen Pseudomonas aeruginosa was pre-cultivated on electrospun scaffolds allowing for non-destructive transfer of the matured biofilm to human in vitro wound models. We infected tissue-engineered human in vitro skin models as well as ex vivo human skin explants with the biofilm and analyzed structural tissue characteristics, biofilm growth behavior, and biofilm-tissue interactions. The structural development of biofilms in close proximity to the tissue, resulting in high bacterial burden and in vivo-like morphology, confirmed a manifest wound infection on all tested wound models, validating their applicability for general investigations of biofilm growth and structure. The extent of bacterial colonization of the wound bed, as well as the subsequent changes in molecular composition of skin tissue, were inherently linked to the characteristics of the underlying wound models including their viability and origin. Notably, the immune response observed in viable ex vivo and in vitro models was consistent with previous in vivo reports. While ex vivo models offered greater complexity and closer similarity to the in vivo conditions, in vitro models consistently demonstrated higher reproducibility. As a consequence, when focusing on direct biofilm-skin interactions, the viability of the wound models as well as their advantages and limitations should be aligned to the particular research question of future studies. Altogether, the novel model allows for a systematic investigation of host-pathogen interactions of bacterial biofilms and human wound tissue, also paving the way for development and predictive testing of novel therapeutics to combat biofilm-infected wounds.

Antimicrobial Peptidomimetics Prevent the Development of Resistance against Gentamicin and Ciprofloxacin in Staphylococcus and Pseudomonas Bacteria

Bacteria readily acquire resistance to traditional antibiotics, resulting in pan-resistant strains with no available treatment. Antimicrobial resistance is a global challenge and without the development of effective antimicrobials, the foundation of modern medicine is at risk. Combination therapies such as antibiotic-antibiotic and antibiotic-adjuvant combinations are strategies used to combat antibiotic resistance. Current research focuses on antimicrobial peptidomimetics as adjuvant compounds, due to their promising activity against antibiotic-resistant bacteria. Here, for the first time we demonstrate that antibiotic-peptidomimetic combinations mitigate the development of antibiotic resistance in Staphylococcus aureus and Pseudomonas aeruginosa. When ciprofloxacin and gentamicin were passaged individually at sub-inhibitory concentrations for 10 days, the minimum inhibitory concentrations (MICs) increased up to 32-fold and 128-fold for S. aureus and P. aeruginosa, respectively. In contrast, when antibiotics were passaged in combination with peptidomimetics (Melimine, Mel4, RK758), the MICs of both antibiotics and peptidomimetics remained constant, indicating these combinations were able to mitigate the development of antibiotic-resistance. Furthermore, antibiotic-peptidomimetic combinations demonstrated synergistic activity against both Gram-positive and Gram-negative bacteria, reducing the concentration needed for bactericidal activity. This has significant potential clinical applications-including preventing the spread of antibiotic-resistant strains in hospitals and communities, reviving ineffective antibiotics, and lowering the toxicity of antimicrobial chemotherapy.

Pan-Cancer Drug Response Prediction Using Integrative Principal Component Regression

The pursuit of precision oncology heavily relies on large-scale genomic and pharmacological data garnered from preclinical cancer model systems such as cell lines. While cell lines are instrumental in understanding the interplay between genomic programs and drug response, it well-established that they are not fully representative of patient tumors. Development of integrative methods that can systematically assess the commonalities between patient tumors and cell-lines can help bridge this gap. To this end, we introduce the Integrative Principal Component Regression (iPCR) model which uncovers both joint and model-specific structured variations in the genomic data of cell lines and patient tumors through matrix decompositions. The extracted joint variation is then used to predict patient drug responses based on the pharmacological data from preclinical models. Moreover, the interpretability of our model allows for the identification of key driver genes and pathways associated with the treatment-specific response in patients across multiple cancers. We demonstrate that the outputs of the iPCR model can assist in inferring both model-specific and shared co-expression networks between cell lines and patients. We show that iPCR performs favorably compared to competing approaches in predicting patient drug responses, in both simulation studies and real-world applications, in addition to identifying key genomic drivers of cancer drug responses.

Synthesis of an insulin-loaded mucoadhesive nanoparticle designed for intranasal administration: focus on new diffusion media

Intranasal administration is a drug delivery approach to provide a non-invasive pharmacological response in the central nervous system with relatively small peripheral side effects. To improve the residence time of intranasal drug delivery systems in the nasal mucosa, mucoadhesive polymers (e.g., chitosan) can be used. Here, insulin-loaded chitosan nanoparticles were synthesized and their physiochemical properties were evaluated based on requirements of intranasal administration. The nanoparticles were spherical (a hydrodynamic diameter of 165.3 nm, polydispersity index of 0.24, and zeta potential of +21.6 mV) that granted mucoadhesion without any noticeable toxicity to the nasal tissue. We applied a new approach using the Krebs-Henseleit buffer solution along with simulated nasal fluid in a Franz's diffusion cell to study this intranasal drug delivery system. We used the Krebs-Henseleit buffer because of its ability to supply glucose to the cells which serves as a novel ex vivo diffusion medium to maintain the viability of the tissue during the experiment. Based on diffusion rate and histopathological endpoints, the Krebs-Henseleit buffer solution can be a substituent solution to the commonly used simulated nasal fluid for such drug delivery systems.

Preclinical in vitro evaluation of implantable materials: conventional approaches, new models and future directions

Nowadays, implants and prostheses are widely used to repair damaged tissues or to treat different diseases, but their use is associated with the risk of infection, inflammation and finally rejection. To address these issues, new antimicrobial and anti-inflammatory materials are being developed. Aforementioned materials require their thorough preclinical testing before clinical applications can be envisaged. Although many researchers are currently working on new in vitro tissues for drug screening and tissue replacement, in vitro models for evaluation of new biomaterials are just emerging and are extremely rare. In this context, there is an increased need for advanced in vitro models, which would best recapitulate the in vivo environment, limiting animal experimentation and adapted to the multitude of these materials. Here, we overview currently available preclinical methods and models for biological in vitro evaluation of new biomaterials. We describe several biological tests used in biocompatibility assessment, which is a primordial step in new material's development, and discuss existing challenges in this field. In the second part, the emphasis is made on the development of new 3D models and approaches for preclinical evaluation of biomaterials. The third part focuses on the main parameters to consider to achieve the optimal conditions for evaluating biocompatibility; we also overview differences in regulations across different geographical regions and regulatory systems. Finally, we discuss future directions for the development of innovative biomaterial-related assays: in silico models, dynamic testing models, complex multicellular and multiple organ systems, as well as patient-specific personalized testing approaches.

ESKAPEE pathogens newly released from biofilm residence by a targeted monoclonal are sensitized to killing by traditional antibiotics

Introduction

The "silent" antimicrobial resistance (AMR) pandemic is responsible for nearly five million deaths annually, with a group of seven biofilm-forming pathogens, known as the ESKAPEE pathogens, responsible for 70% of these fatalities. Biofilm-resident bacteria, as they exist within the disease site, are canonically highly resistant to antibiotics. One strategy to counter AMR and improve disease resolution involves developing methods to disrupt biofilms. These methods aim to release bacteria from the protective biofilm matrix to facilitate their killing by antibiotics or immune effectors. Several laboratories working on such strategies have demonstrated that bacteria newly released from a biofilm display a transient phenotype of significantly increased susceptibility to antibiotics. Similarly, we developed an antibody-based approach for biofilm disruption directed against the two-membered DNABII family of bacterial DNA-binding proteins, which serve as linchpins to stabilize the biofilm matrix. The incubation of biofilms with α-DNABII antibodies rapidly collapses them to induce a population of newly released bacteria (NRel).

Methods

In this study, we used a humanized monoclonal antibody (HuTipMab) directed against protective epitopes of a DNABII protein to determine if we could disrupt biofilms formed by the high-priority ESKAPEE pathogens as visualized by confocal laser scanning microscopy (CLSM) and COMSTAT2 analysis. Then, we demonstrated the potentiated killing of the induced NRel by seven diverse classes of traditional antibiotics by comparative plate count.

Results

To this end, ESKAPEE biofilms were disrupted by 50%-79% using a single tested dose and treatment period with HuTipMab. The NRel of each biofilm were significantly more sensitive to killing than their planktonically grown counterparts (heretofore, considered to be the most sensitive to antibiotic-mediated killing), even when tested at a fraction of the MIC (1/250-1/2 MIC). Moreover, the bacteria that remained within the biofilms of two representative ESKAPEE pathogens after HuTipMab disruption were also significantly more susceptible to killing by antibiotics.

Discussion

New data presented in this study support our continued development of a combinatorial therapy wherein HuTipMab is delivered to a patient with recalcitrant disease due to an ESKAPEE pathogen to disrupt a pathogenic biofilm, along with a co-delivered dose of an antibiotic whose ability to rapidly kill the induced NRel has been demonstrated. This novel regimen could provide a more successful clinical outcome to those with chronic, recurrent, or recalcitrant diseases, while limiting further contribution to AMR.

A collagen-based layered chronic wound biofilm model for testing antimicrobial wound products

A new in vitro chronic wound biofilm model was recently published, which provided a layered scaffold simulating mammalian tissue composition on which topical wound care products could be tested. In this paper, we updated the model even further to mimic the dynamic influx of nutrients from below as is the case in a chronic wound. The modified in vitro model was created using collagen instead of agar as the main matrix component and contained both Staphylococcus aureus and Pseudomonas aeruginosa. The model was cast in transwell inserts and then placed in wound simulating media, which allowed for an exchange of nutrients and waste products across a filter. Three potential wound care products and chlorhexidine digluconate 2% solution as a positive control were used to evaluate the model. The tested products were composed of hydrogels made from completely biodegradable starch microspheres carrying different active compounds. The compounds were applied topically and left for 2-4 days. Profiles of oxygen concentration and pH were measured to assess the effect of treatments on bacterial activity. Confocal microscope images were obtained of the models to visualise the existence of microcolonies. Results showed that the modified in vitro model maintained a stable number of the two bacterial species over 6 days. In untreated models, steep oxygen gradients developed and pH increased to >8.0. Hydrogels containing active compounds alleviated the high oxygen consumption and decreased pH drastically. Moreover, all three hydrogels reduced the colony forming units significantly and to a larger extent than the chlorhexidine control treatment. Overall, the modified model expressed several characteristics similar to in vivo chronic wounds.

New Flow Cytometric Methods for Monitoring STAT5 Signaling Reveal Responses to SARS-CoV-2 Antigen-Specific Stimulation in FOXP3+ Regulatory T Cells also in Patients with Advanced Chronic Lymphocytic Leukemia

Increased frequency of CD4⁺CD25⁺ regulatory T-cells (Treg) has been associated with disease progression in chronic lymphocytic leukemia (CLL). Flow cytometric methods, which allow for the simultaneous analysis of their specific transcription factor Foxp3 and activated STAT proteins, together with proliferation can help to elucidate the signaling mechanisms driving Treg expansion and suppression of FOXP3- conventional CD4⁺T-cells (Tcon). Herein, we first report a novel approach in which STAT5 phosphorylation (pSTAT5) and proliferation (BrdU-FITC incorporation) could be analyzed specifically in FOXP3+ and FOXP3- responding cells after CD3/CD28 stimulation. The addition of magnetically purified CD4⁺CD25⁺ T-cells from healthy donors to cocultured autologous CD4⁺CD25^- T-cells resulted in suppression of Tcon cell cycle progression accompanied by a decrease in pSTAT5. Next, a method using imaging flow cytometry is presented for the detection of cytokine-dependent pSTAT5 nuclear translocation in FOXP3-expressing cells. Finally, we discuss our experimental data obtained by combining Treg pSTAT5 analysis and antigen-specific stimulation with SARS-CoV-2 antigens. Applying these methods on samples from patients revealed Treg responses to antigen-specific stimulation and significantly higher basal pSTAT5 in CLL patients treated with immunochemotherapy. Thus, we speculate that through the use of this pharmacodynamic tool, the efficacy of immunosuppressive drugs and their possible off-target effects can be assessed.

Sprayable Berberine-Silk Fibroin Microspheres with Extracellular Matrix Anchoring Function Accelerate Infected Wound Healing through Antibacterial and Anti-inflammatory Effects

The conventional method of applying local medications for treating wound infections is often ineffective because of the dilution of drugs by the excess wound exudate. In addition, there have been insufficient studies investigating the adhesion between drug-loaded nanomaterials and cells or tissue. To address this intractable problem, berberine-silk fibroin microspheres (Ber@MPs) with an extracellular matrix-anchoring function were developed in this study. The microspheres were prepared from silk fibroin using the polyethylene glycol emulsion precipitation method. Subsequently, berberine was loaded onto the microspheres. Our results revealed that Ber@MPs firmly anchored to cells, continuously releasing berberine in the microenvironment. Moreover, both Ber@MPs and Ber@MPs-cell complexes exerted a strong and long-lasting antibacterial effect against Staphylococcus aureus and Staphylococcus epidermidis in the microenvironment, despite the large amount of wound exudate. In addition, Ber@MPs effectively resisted the inflammatory response induced by lipopolysaccharides and accelerated the migration of fibroblasts and neovascularization of endothelial cells cultured in inflammation-induced media. Finally, the in vivo experiments confirmed that the Ber@MP spray accelerated the healing of infected wounds via its antibacterial and anti-inflammatory effects. Therefore, this study provides a novel strategy for treating infected wounds in the presence of excess exudate.

Sodium selenite preserves rBM-MSCs' stemness, differentiation potential, and immunophenotype and protects them against oxidative stress via activation of the Nrf2 signaling pathway

BACKGROUND

The physiological level of reactive oxygen species (ROS) is necessary for many cellular functions. However, during the in-vitro manipulations, cells face a high level of ROS, leading to reduced cell quality. Preventing this abnormal ROS level is a challenging task. Hence, here we evaluated the effect of sodium selenite supplementation on the antioxidant potential, stemness capacity, and differentiation of rat-derived Bone Marrow MSCs (rBM-MSCs) and planned to check our hypothesis on the molecular pathways and networks linked to sodium selenite's antioxidant properties.

METHODS

MTT assay was used to assess the rBM-MSCs cells' viability following sodium selenite supplementation (concentrations of: 0.001, 0.01, 0.1, 1, 10 µM). The expression level of OCT-4, NANOG, and SIRT1 was explored using qPCR. The adipocyte differentiation capacity of MSCs was checked after Sodium Selenite treatment. The DCFH-DA assay was used to determine intracellular ROS levels. Sodium selenite-related expression of HIF-1α, GPX, SOD, TrxR, p-AKT, Nrf2, and p38 markers was determined using western blot. Significant findings were investigated by the String tool to picture the probable molecular network.

RESULTS

Media supplemented with 0.1 µM sodium selenite helped to preserve rBM-MSCs multipotency and keep their surface markers presentation; this also reduced the ROS level and improved the rBM-MSCs' antioxidant and stemness capacity. We observed enhanced viability and reduced senescence for rBM-MSCs. Moreover, sodium selenite helped in rBM-MSCs cytoprotection by regulating the expression of HIF-1 of AKT, Nrf2, SOD, GPX, and TrxR markers.

CONCLUSIONS

We showed that sodium selenite could help protect MSCs during in-vitro manipulations, probably via the Nrf2 pathway.

Gut-on-a-chip models for dissecting the gut microbiology and physiology

Microfluidic technologies have been extensively investigated in recent years for developing organ-on-a-chip-devices as robust in vitro models aiming to recapitulate organ 3D topography and its physicochemical cues. Among these attempts, an important research front has focused on simulating the physiology of the gut, an organ with a distinct cellular composition featuring a plethora of microbial and human cells that mutually mediate critical body functions. This research has led to innovative approaches to model fluid flow, mechanical forces, and oxygen gradients, which are all important developmental cues of the gut physiological system. A myriad of studies has demonstrated that gut-on-a-chip models reinforce a prolonged coculture of microbiota and human cells with genotypic and phenotypic responses that closely mimic the in vivo data. Accordingly, the excellent organ mimicry offered by gut-on-a-chips has fueled numerous investigations on the clinical and industrial applications of these devices in recent years. In this review, we outline various gut-on-a-chip designs, particularly focusing on different configurations used to coculture the microbiome and various human intestinal cells. We then elaborate on different approaches that have been adopted to model key physiochemical stimuli and explore how these models have been beneficial to understanding gut pathophysiology and testing therapeutic interventions.

In Vitro Models of Bacterial Biofilms: Innovative Tools to Improve Understanding and Treatment of Infections

Bacterial infections are a growing concern to the health care systems. Bacteria in the human body are often found embedded in a dense 3D structure, the biofilm, which makes their eradication even more challenging. Indeed, bacteria in biofilm are protected from external hazards and are more prone to develop antibiotic resistance. Moreover, biofilms are highly heterogeneous, with properties dependent on the bacteria species, the anatomic localization, and the nutrient/flow conditions. Therefore, antibiotic screening and testing would strongly benefit from reliable in vitro models of bacterial biofilms. This review article summarizes the main features of biofilms, with particular focus on parameters affecting biofilm composition and mechanical properties. Moreover, a thorough overview of the in vitro biofilm models recently developed is presented, focusing on both traditional and advanced approaches. Static, dynamic, and microcosm models are described, and their main features, advantages, and disadvantages are compared and discussed.

Physiomimetic In Vitro Human Models for Viral Infection in the Liver

Viral hepatitis is a leading cause of liver morbidity and mortality globally. The mechanisms underlying acute infection and clearance, versus the development of chronic infection, are poorly understood. In vitro models of viral hepatitis circumvent the high costs and ethical considerations of animal models, which also translate poorly to studying the human-specific hepatitis viruses. However, significant challenges are associated with modeling long-term infection in vitro. Differentiated hepatocytes are best able to sustain chronic viral hepatitis infection, but standard two-dimensional models are limited because they fail to mimic the architecture and cellular microenvironment of the liver, and cannot maintain a differentiated hepatocyte phenotype over extended periods. Alternatively, physiomimetic models facilitate important interactions between hepatocytes and their microenvironment by incorporating liver-specific environmental factors such as three-dimensional ECM interactions and co-culture with non-parenchymal cells. These physiologically relevant interactions help maintain a functional hepatocyte phenotype that is critical for sustaining viral hepatitis infection. In this review, we provide an overview of distinct, novel, and innovative in vitro liver models and discuss their functionality and relevance in modeling viral hepatitis. These platforms may provide novel insight into mechanisms that regulate viral clearance versus progression to chronic infections that can drive subsequent liver disease.

Emerging trends in the methodology of environmental toxicology: 3D cell culture and its applications

Human diseases and health concerns caused by environmental pollutants are globally emerging. Therefore, rapid and efficient evaluation of the effects of environmental pollutants on human health is essential. Due to the significant differences between humans and animals and the lack of physiologically related environments, animal models and two-dimensional (2D) culture cannot accurately describe toxicological effects and predict actual in vivo responses. To make up for the limitations of traditional environmental toxicology screening, three-dimensional (3D) culture has been developed. The 3D culture could provide a good organizational structure comparable to the complex internal environment of humans and produce a more realistic response to environmental pollutants, which has been used in drug development, toxicity evaluation, personalized therapy and biological mechanism research. The goal of environmental toxicology is to provide clues and support for the risk assessment and management of environmental pollutants. With the development of 3D culture that can reproduce specific physiological aspects loaded with specific cells that reflect human biology, interactions between pollutants and target tissues and organs can be explored to assess the acute and chronic adverse health effects of exposure to various environmental toxins. The 3D culture with great potential shows broad prospects in toxicology research and is expected to bridge the gap between 2D culture and animal models eventually. In this sense, we strongly recommend that 3D culture be used to identify and understand environmental toxins, which will greatly facilitate the public's comprehensive understanding of environmental toxins.

Generating bioactive and antiseptic interfaces with nano-silver hydroxyapatite-based coatings by pulsed electrochemical deposition for long-term efficient cervical soft tissue sealing

Infections related to osseointegrated implants have sparked the interest in studying titanium modification for long-term effective soft tissue sealing. Constructing a silver (Ag)-hydroxyapatite (HA) coating is regarded as an effective strategy for integrating antibiosis with osteanagenesis; however, the outcome for long-term cervical soft tissue sealing in vivo is compromised. It is challenging to construct an Ag-HA coating for long-term efficient soft tissue integration that instills a maximum antibacterial effect while retaining favorable bioactivity to normal gingival mesenchymal cells in vivo. In this study, we employed gradient concentrations of Ag/CaP by pulsed electrochemical deposition to fabricate optimal Ag-HA nanocoatings. By physicochemical analyses, these uniform coatings were mainly formed with spherical metallic and hydroxyapatite nanoparticles, which facilitated good hydrophilicity, moderate rough surfaces and corrosion protection. Furthermore, the nanocoating of the 1.5Ag/CaP group exhibited superior performances in dental follicle cells' proliferation, osteogenic differentiation and antibacterial properties mainly through direct contact inhibition and partially through sustained silver ion release, which resulted in functional cervical soft tissue sealing in beagles lasting for one year. Our investigations provide a feasible strategy to balance the long-term antibacterial demand and bioactive induction around osseointegrated implants for long-term efficient cervical soft tissue sealing.

A Novel Method for Primary Blood Cell Culturing and Selection in Drosophila melanogaster

The blood cells of the fruit fly Drosophila melanogaster show many similarities to their vertebrate counterparts, both in their functions and their differentiation. In the past decades, a wide palette of immunological and transgenic tools and methods have been developed to study hematopoiesis in the Drosophila larva. However, the in vivo observation of blood cells is technically restricted by the limited transparency of the body and the difficulty in keeping the organism alive during imaging. Here we describe an improved ex vivo culturing method that allows effective visualization and selection of live blood cells in primary cultures derived from Drosophila larvae. Our results show that cultured hemocytes accurately represent morphological and functional changes following immune challenges and in case of genetic alterations. Since cell culturing has hugely contributed to the understanding of the physiological properties of vertebrate blood cells, this method provides a versatile tool for studying Drosophila hemocyte differentiation and functions ex vivo.

Antibiotic resistant bacteria: A bibliometric review of literature

Antibiotic-resistant bacteria (ARB) are a serious threat to the health of people and the ecological environment. With this problem becoming more and more serious, more countries made research on the ARB, and the research number has been sharply increased particularly over the past decade. Therefore, it is quite necessary to globally retrace relevant researches on the ARB published from 2010 to 2020. This will help researchers to understand the current research situation, research trends and research hotspots in this field. This paper uses bibliometrics to examine publications in the field of ARB from 2010 to 2020 that were retrieved from the Web of Science (WOS). Our study performed a statistical analysis of the countries, institutions, journals, authors, research areas, author keywords, Essential Science Indicators (ESI) highly cited papers, and ESI hotspots papers to provide an overview of the ARB field as well as research trends, research hotspots, and future research directions in the field. The results showed that the number of related studies is increasing year by year; the USA is most published in the field of ARB; China is the most active in this field in the recent years; the Chinese Acad Sci published the most articles; Sci. Total Environ. published the greatest number of articles; CM Manaia has the most contributions; Environmental Sciences and Ecology is the most popular research area; and "antibiotic resistance," "antibiotics," and "antibiotic resistance genes" were the most frequently occurring author keywords. A citation analysis showed that aquatic environment-related antibiotic resistance is a key research area in this field, while antimicrobial nanomaterial-related research is a recent popular topic.

Interactive Effects of Copper-Doped Urological Implants with Tissue in the Urinary Tract for the Inhibition of Cell Adhesion and Encrustation in the Animal Model Rat

The insertion of a ureteral stent provides acute care by restoring urine flow and alleviating urinary retention or dysfunction. The problems of encrustation, bacterial colonization and biofilm formation become increasingly important when ureteral stents are left in place for a longer period of time. One way to reduce encrustation and bacterial adherence is to modify the stent surface with a diamond-like carbon coating, in combination with copper doping. The biocompatibilities of the Elastollan^® base material and the a-C:H/Cu-mulitilayer coating were tested in synthetic urine. The copper content in bladder tissue was determined by atomic absorption spectroscopy and in blood and in urine by inductively coupled plasma mass spectrometry. Encrustations on the materials were analyzed by scanning electron microscopy, energy dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy. A therapeutic window for copper ions of 0.5–1.0 mM was determined to kill bacteria without affecting human urothelial cells. In the rat animal model, it was found that copper release did not reach toxic concentrations in the affecting tissue of the urinary tract or in the blood. The encrustation behavior of the surfaces showed that the roughness of the amorphous carbon layer with the copper doping is probably the causal factor for the higher encrustation.

Deploying Gold Nanomaterials in Combating Multi-Drug-Resistant Bacteria

Antibiotic resistance has become a serious threat to human health due to the overuse of antibiotics. Different antibiotics are being developed to treat resistant bacteria, but the development cycle of antibiotics is hard to keep up with the high incidence of antibiotic resistance. Recent advances in antimicrobial nanomaterials have made nanotechnology a powerful solution to this dilemma. Among these nanomaterials, gold nanomaterials have excellent antibacterial efficacy and biosafety, making them alternatives to antibiotics. This review presents strategies that use gold nanomaterials to combat drug-resistant bacteria. We focus on the influence of physicochemical factors such as surface chemistry, size, and shape of gold nanomaterials on their antimicrobial properties and describe the antimicrobial applications of gold nanomaterials in medical devices. Finally, the existing challenges and future directions are discussed.

3D Human Organoids: The Next “Viral” Model for the Molecular Basis of Infectious Diseases

The COVID-19 pandemic has driven the scientific community to adopt an efficient and reliable model that could keep up with the infectious disease arms race. Coinciding with the pandemic, three dimensional (3D) human organoids technology has also gained traction in the field of infectious disease. An in vitro construct that can closely resemble the in vivo organ, organoid technology could bridge the gap between the traditional two-dimensional (2D) cell culture and animal models. By harnessing the multi-lineage characteristic of the organoid that allows for the recapitulation of the organotypic structure and functions, 3D human organoids have emerged as an essential tool in the field of infectious disease research. In this review, we will be providing a comparison between conventional systems and organoid models. We will also be highlighting how organoids played a role in modelling common infectious diseases and molecular mechanisms behind the pathogenesis of causative agents. Additionally, we present the limitations associated with the current organoid models and innovative strategies that could resolve these shortcomings.

Phagosomal Acidification Is Required to Kill Streptococcus pneumoniae in a Zebrafish Model

Streptococcus pneumoniae (the pneumococcus) is a major human pathogen causing invasive disease, including community-acquired bacteraemia, and remains a leading cause of global mortality. Understanding the role of phagocytes in killing bacteria is still limited, especially in vivo. In this study, we established a zebrafish model to study the interaction between intravenously administered pneumococci and professional phagocytes such as macrophages and neutrophils, to unravel bacterial killing mechanisms employed by these immune cells. Our model confirmed the key role of polysaccharide capsule in promoting pneumococcal virulence through inhibition of phagocytosis. Conversely, we show pneumococci lacking a capsule are rapidly internalised by macrophages. Low doses of encapsulated S. pneumoniae cause near 100% mortality within 48 hours postinfection (hpi), while 50 times higher doses of unencapsulated pneumococci are easily cleared. Time course analysis of in vivo bacterial numbers reveals that while encapsulated pneumococcus proliferates to levels exceeding 105 CFU at the time of host death, unencapsulated bacteria are unable to grow and are cleared within 20 hpi. Using genetically induced macrophage depletion, we confirmed an essential role for macrophages in bacterial clearance. Additionally, we show that upon phagocytosis by macrophages, phagosomes undergo rapid acidification. Genetic and chemical inhibition of vacuolar ATPase (v-ATPase) prevents intracellular bacterial killing and induces host death indicating a key role of phagosomal acidification in immunity to invading pneumococci. We also show that our model can be used to study the efficacy of antimicrobials against pneumococci in vivo. Collectively, our data confirm that larval zebrafish can be used to dissect killing mechanisms during pneumococcal infection in vivo and highlight key roles for phagosomal acidification in macrophages for pathogen clearance.

Combination effect of epsilon-poly-L-lysine and antibiotics against common bacterial pathogens

Epsilon-poly-L-lysine (EPL) is an antimicrobial peptide with low mammalian toxicity; thus, it is commonly used as food preservative. Here, the capacity of EPL to improve the efficacy of the antibiotics ampicillin (AMP), gentamycin (GEN), tetracycline (TCN), and methicillin (MET) against four bacterial pathogens, namely Pseudomonas aeruginosa PAO1, Klebsiella pneumoniae CG43, MET-sensitive Staphylococcus aureus ATCC 25923 (MSSA), and MET-resistant S. aureus ATCC 33591 (MRSA), was investigated. Some antibiotic-EPL combinations, i.e., AMP-EPL, GEN-EPL, and TCN-EPL, were particularly active against the pathogens through synergy, partial synergy, or additive effects. Additionally, MET-EPL displayed a partial synergistic effect against MRSA. GEN-EPL had the most powerful antimicrobial effect against MSSA: it eradicated the bacterium within an hour. Conversely, AMP-EPL and MET-EPL were the least potent combinations against MRSA, and TCN-EPL was least potent against K. pneumoniae; for these combinations, bactericidal activities occurred >10 h after initial treatments. All antibiotic-EPL treatments showed inhibitory activities against P. aeruginosa biofilm formation and enhanced preformed biofilm disruption in vitro. Similarly, the inhibition of biofilm formation on a porcine skin model was observed. Moreover, no significant cytotoxicity was detected for any antibiotic-EPL treatment in tests using Balb/3t3 fibroblasts. Given the rise in antibiotic-resistant bacteria, combining antibiotics with EPL may enhance antibiotic effectiveness, as shown in this study, while helping to avoid antimicrobial resistance.

Making Antimicrobial Susceptibility Testing More Physiologically Relevant with Bicarbonate?

Azithromycin is a clinically important drug for treating invasive salmonellosis despite poor activity in laboratory assays for MIC. Addition of the main buffer in blood, bicarbonate, has been proposed for more physiologically relevant and more predictive testing conditions. However, we show here that bicarbonate-triggered lowering of azithromycin MIC is entirely due to alkalization of insufficiently buffered media. In addition, bicarbonate is unlikely to be altering efflux pump activity.

Biomineralized Cascade Enzyme-Encapsulated ZIF-8 Nanoparticles Combined with Antisense Oligonucleotides for Drug-Resistant Bacteria Treatment

The unrestrained use of antibiotics accelerates the development of drug-resistant bacteria and leads to an increasing threat to human health. Therefore, there is an urgent need to explore novel and effective strategies for the treatment of bacterial infections. Herein, zeolite imidazole framework-8 (ZIF-8) material was utilized to construct biomineralized nanomaterial (GOx&HRP@ZIF-8/ASO) by encapsulating biological cascade enzymes and combining with antisense oligonucleotides (ASOs), which achieved effective and synergistic antidrug-resistant bacteria therapy. Various in vitro assays confirmed that GOx&HRP@ZIF-8/ASO exhibited excellent antibacterial properties against Escherichia coli, Staphylococcus aureus, methicillin-resistant S. aureus (MRSA) during catalysis of glucose (Glu), especially the minimum inhibitory concentration (MIC) against MRSA was only 16 μg/mL. Compared with simple ZIF-8 (32.85%) and ftsZ ASO (58.65%), GOx&HRP@ZIF-8/ASO+Glu exhibited superb biofilm destruction ability, and the bacteria removal efficiency of the MRSA biofilm could be as high as 88.2%, indicating that the reactive oxygen species (ROS) produced by the cascade enzyme reaction imparted the main synergistic antibacterial capability, and simultaneously, ftsZ ASO significantly enhanced the antibacterial effect by inhibiting the expression of the ftsZ gene. In vivo anti-infection treatment experiments revealed that GOx&HRP@ZIF-8/ASO exhibited the best wound repairing performance and excellent biocompatibility in the presence of Glu. These findings suggested that GOx&HRP@ZIF-8/ASO has favorably realized high-efficiency treatment of MRSA infection and filled the gap in the antibacterial application of biological enzymes.

Tissue compartmentalization enables Salmonella persistence during chemotherapy

Antimicrobial chemotherapy can fail to eradicate the pathogen, even in the absence of antimicrobial resistance. Persisting pathogens can subsequently cause relapsing diseases. In vitro studies suggest various mechanisms of antibiotic persistence, but their in vivo relevance remains unclear because of the difficulty of studying scarce pathogen survivors in complex host tissues. Here, we localized and characterized rare surviving Salmonella in mouse spleen using high-resolution whole-organ tomography. Chemotherapy cleared >99.5% of the Salmonella but was inefficient against a small Salmonella subset in the white pulp. Previous models could not explain these findings: drug exposure was adequate, Salmonella continued to replicate, and host stresses induced only limited Salmonella drug tolerance. Instead, antimicrobial clearance required support of Salmonella-killing neutrophils and monocytes, and the density of such cells was lower in the white pulp than in other spleen compartments containing higher Salmonella loads. Neutrophil densities declined further during treatment in response to receding Salmonella loads, resulting in insufficient support for Salmonella clearance from the white pulp and eradication failure. However, adjunctive therapies sustaining inflammatory support enabled effective clearance. These results identify uneven Salmonella tissue colonization and spatiotemporal inflammation dynamics as main causes of Salmonella persistence and establish a powerful approach to investigate scarce but impactful pathogen subsets in complex host environments.

Assessing Intestinal Health. In Vitro and Ex vivo Gut Barrier Models of Farm Animals: Benefits and Limitations

Animal performance is determined by the functionality and health of the gastrointestinal tract (GIT). Complex mechanisms and interactions are involved in the regulation of GIT functionality and health. The understanding of these relationships could be crucial for developing strategies to improve animal production yields. The concept of "gut health" is not well defined, but this concept has begun to play a very important role in the field of animal science. However, a clear definition of GIT health and the means by which to measure it are lacking. In vitro and ex vivo models can facilitate these studies, creating well-controlled and repeatable conditions to understand how to improve animal gut health. Over the years, several models have been developed and used to study the beneficial or pathogenic relationships between the GIT and the external environment. This review aims to describe the most commonly used animals' in vitro or ex vivo models and techniques that are useful for better understanding the intestinal health of production animals, elucidating their benefits and limitations.

Optimization and Evaluation of Novel Antifungal Agents for the Treatment of Fungal Infection

Due to the increased morbidity and mortality by fungal infections and the emergence of severe antifungal resistance, there is an urgent need for new antifungal agents. Here, we screened for antifungal activity in our in-house library through the minimum inhibitory concentration test and derived two hit compounds with moderate antifungal activities. The hit compounds' antifungal activities and drug-like properties were optimized by substituting various aryl ring, alkyl chain, and methyl groups. Among the optimized compounds, 22h was the most promising candidate with good drug-like properties and exhibited potent fast-acting fungicidal antifungal effects against various fungal pathogens and synergistic antifungal activities with some known antifungal drugs. Additionally, 22h was further confirmed to disturb fungal cell wall integrity by activating multiple cell wall integrity pathways. Furthermore, 22h exerted significant antifungal efficacy in both the subcutaneous infection mouse model and ex vivo human nail infection model.

Bioinspired drug delivery strategies for repurposing conventional antibiotics against intracellular infections

Bacteria have developed a wealth of strategies to avoid and resist the action of antibiotics, one of which involves pathogens invading and forming reservoirs within host cells. Due to the poor cell membrane permeability, stability and retention of conventional antibiotics, this renders current treatments largely ineffective, since achieving a therapeutically relevant antibiotic concentration at the site of intracellular infection is not possible. To overcome such challenges, current antibiotics are 'repurposed' via reformulation using micro- or nano-carrier systems that effectively encapsulate and deliver therapeutics across cellular membranes of infected cells. Bioinspired materials that imitate the uptake of biological particulates and release antibiotics in response to natural stimuli are recently explored to improve the targeting and specificity of this 'nanoantibiotic' approach. In this review, the mechanisms of internalization and survival of intracellular bacteria are elucidated, effectively accentuating the current treatment challenges for intracellular infections and the implications for repurposing conventional antibiotics. Key case studies of nanoantibiotics that have drawn inspiration from natural biological particles and cellular uptake pathways to effectively eradicate intracellular pathogens are detailed, clearly highlighting the rational for harnessing bioinspired drug delivery strategies.

Challenges in Drug Discovery for Intracellular Bacteria

Novel drugs are needed to treat a variety of persistent diseases caused by intracellular bacterial pathogens. Virulence pathways enable many functions required for the survival of these pathogens, including invasion, nutrient acquisition, and immune evasion. Inhibition of virulence pathways is an established route for drug discovery; however, many challenges remain. Here, we propose the biggest problems that must be solved to advance the field meaningfully. While it is established that we do not yet understand the nature of chemicals capable of permeating into the bacterial cell, this problem is compounded when targeting intracellular bacteria because we are limited to only those chemicals that can permeate through both human and bacterial outer envelopes. Unfortunately, many chemicals that permeate through the outer layers of mammalian cells fail to penetrate the bacterial cytoplasm. Another challenge is the lack of publicly available information on virulence factors. It is virtually impossible to know which virulence factors are clinically relevant and have broad cross-species and cross-strain distribution. In other words, we have yet to identify the best drug targets. Yes, standard genomics databases have much of the information necessary for short-term studies, but the connections with patient outcomes are yet to be established. Without comprehensive data on matters such as these, it is difficult to devise broad-spectrum, effective anti-virulence agents. Furthermore, anti-virulence drug discovery is hindered by the current state of technologies available for experimental investigation. Antimicrobial drug discovery was greatly advanced by the establishment and standardization of broth microdilution assays to measure the effectiveness of antimicrobials. However, the currently available models used for anti-virulence drug discovery are too broad, as they must address varied phenotypes, and too expensive to be generally adopted by many research groups. Therefore, we believe drug discovery against intracellular bacterial pathogens can be advanced significantly by overcoming the above hurdles.

The prospects of antimicrobial coated medical implants

The implants are increasingly being a part of modern medicine in various surgical procedures for functional or cosmetic purposes. The progressive use of implants is associated with increased infectious complications and prevention of such infections always remains precedence in the clinical settings. The preventive approaches include the systemic administration of antimicrobial agents before and after the surgical procedures as well as the local application of antibiotics. The relevant literature and existing clinical practices have highlighted the role of antimicrobial coating approaches in the prevention of implants associated infections, although the applications of these strategies are not yet standardized, and the clinical efficacy is not much clear. The adequate data from the randomized control trials is challenging because of the unavailability of a large sample size although it is compulsory in this context to assess the clinical efficacy of preemptive practices. This review compares the efficacy of preventive approaches and the prospects of antimicrobial-coated implants in preventing implant-related infections.

Microbiota and cancer: In vitro and in vivo models to evaluate nanomedicines

Nanomedicine implication in cancer treatment and diagnosis studies witness huge attention, especially with the promising results obtained in preclinical studies. Despite this, only few nanomedicines succeeded to pass clinical phase. The human microbiota plays obvious roles in cancer development. Nanoparticles have been successfully used to modulate human microbiota and notably tumor associated microbiota. Taking the microbiota involvement under consideration when testing nanomedicines for cancer treatment might be a way to improve the poor translation from preclinical to clinical trials. Co-culture models of bacteria and cancer cells, as well as animal cancer-microbiota models offer a better representation for the tumor microenvironment and so potentially better platforms to test nanomedicine efficacy in cancer treatment. These models would allow closer representation of human cancer and might smoothen the passage from preclinical to clinical cancer studies for nanomedicine efficacy.

Therapy of infected wounds: overcoming clinical challenges by advanced drug delivery systems

In recent years, the incidence of infected wounds is steadily increasing, and so is the clinical as well as economic interest in effective therapies. These combine reduction of pathogen load in the wound with general wound management to facilitate the healing process. The success of current therapies is challenged by harsh conditions in the wound microenvironment, chronicity, and biofilm formation, thus impeding adequate concentrations of active antimicrobials at the site of infection. Inadequate dosing accuracy of systemically and topically applied antibiotics is prone to promote development of antibiotic resistance, while in the case of antiseptics, cytotoxicity is a major problem. Advanced drug delivery systems have the potential to enable the tailor-made application of antimicrobials to the side of action, resulting in an effective treatment with negligible side effects. This review provides a comprehensive overview of the current state of treatment options for the therapy of infected wounds. In this context, a special focus is set on delivery systems for antimicrobials ranging from semi-solid and liquid formulations over wound dressings to more advanced carriers such as nano-sized particulate systems, vesicular systems, electrospun fibers, and microneedles, which are discussed regarding their potential for effective therapy of wound infections. Further, established and novel models and analytical techniques for preclinical testing are introduced and a future perspective is provided.

Refining Host-Pathogen Interactions: Organ-on-Chip Side of the Coin

Bioinspired organ-level in vitro platforms that recapitulate human organ physiology and organ-specific responses have emerged as effective technologies for infectious disease research, drug discovery, and personalized medicine. A major challenge in tissue engineering for infectious diseases has been the reconstruction of the dynamic 3D microenvironment reflecting the architectural and functional complexity of the human body in order to more accurately model the initiation and progression of host-microbe interactions. By bridging the gap between in vitro experimental models and human pathophysiology and providing alternatives for animal models, organ-on-chip microfluidic devices have so far been implemented in multiple research areas, contributing to major advances in the field. Given the emergence of the recent pandemic, plug-and-play organ chips may hold the key for tackling an unmet clinical need in the development of effective therapeutic strategies. In this review, latest studies harnessing organ-on-chip platforms to unravel host-pathogen interactions are presented to highlight the prospects for the microfluidic technology in infectious diseases research.

Personalized Reusable Face Masks with Smart Nano-Assisted Destruction of Pathogens for COVID-19: A Visionary Road

The Coronavirus disease 2019 (COVID-19) emergency has demonstrated that the utilization of face masks plays a critical role in limiting the outbreak. Healthcare professionals utilize masks all day long without replacing them very frequently, thus representing a source of cross-infection for patients and themselves. Nanotechnology is a powerful tool with the capability to produce nanomaterials with unique physicochemical and antipathogen properties. Here, how to realize non-disposable and highly comfortable respirators with light-triggered self-disinfection ability by bridging bioactive nanofiber properties and stimuli-responsive nanomaterials is outlined. The visionary road highlighted in this Concept is based on the possibility of developing a new generation of masks based on multifunctional membranes where the presence of nanoclusters and plasmonic nanoparticles arranged in a hierarchical structure enables the realization of a chemically driven and on-demand antipathogen activities. Multilayer electrospun membranes have the ability to dissipate humidity present within the mask, enhancing the wearability and usability. The photothermal disinfected membrane is the core of these 3D printed and reusable masks with moisture pump capability. Personalized face masks with smart nano-assisted destruction of pathogens will bring enormous advantages to the entire global community, especially for front-line personnel, and will open up great opportunities for innovative medical applications.

A New Promising Anti-Infective Agent Inhibits Biofilm Growth by Targeting Simultaneously a Conserved RNA Function That Controls Multiple Genes

Combating single and multi-drug-resistant infections in the form of biofilms is an immediate challenge. The challenge is to discover innovative targets and develop novel chemistries that combat biofilms and drug-resistant organisms, and thwart emergence of future resistant strains. An ideal novel target would control multiple genes, and can be inhibited by a single compound. We previously demonstrated success against Staphylococcus aureus biofilms by targeting the tRNA-dependent regulated T-box genes, not present in the human host. Present in Gram-positive bacteria, T-box genes attenuate transcription with a riboswitch-like element that regulates the expression of aminoacyl-tRNA synthetases and amino acid metabolism genes required for cell viability. PKZ18, the parent of a family of compounds selected in silico from 305,000 molecules, inhibits the function of the conserved T-box regulatory element and thus blocks growth of antibiotic-resistant S. aureus in biofilms. The PKZ18 analog PKZ18-22 was 10-fold more potent than vancomycin in inhibiting growth of S. aureus in biofilms. In addition, PKZ18-22 has a synergistic effect with existing antibiotics, e.g., gentamicin and rifampin. PKZ18-22 inhibits the T-box regulatory mechanism, halts the transcription of vital genes, and results in cell death. These effects are independent of the growth state, planktonic or biofilm, of the bacteria, and could inhibit emergent strains.

Environmental toxicology wars: Organ-on-a-chip for assessing the toxicity of environmental pollutants

Environmental pollution is a widespread problem, which has seriously threatened human health and led to an increase of human diseases. Therefore, it is critical to evaluate environmental pollutants quickly and efficiently. Because of obvious inter-species differences between animals and humans, and lack of physiologically-relevant microenvironment, animal models and in vitro two-dimensional (2D) models can not accurately describe toxicological effects and predicting actual in vivo responses. To make up the limitations of conventional environmental toxicology screening, organ-on-a-chip (OOC) systems are increasingly developing. OOC systems can provide a well-organized architecture with comparable to the complex microenvironment in vivo and generate realistic responses to environmental pollutants. The feasibility, adjustability and reliability of OCC systems make it possible to offer new opportunities for environmental pollutants screening, which can study their metabolism, collective response, and fate in vivo. Further progress can address the challenges to make OCC systems better investigate and evaluate environmental pollutants with high predictive power.

Orally hypoglycemic activity of an insulin mimetic glycoprotein isolated from Cnidoscolus quercifolius Pohl. (Euphorbiaceae) seeds, Cq-IMP

The genus Cnidoscolus (Euphorbiaceae) is widely distributed in tropical areas. In the Northeast of Brazil, the species C. quercifolius is endemic and has been used in traditional medicine. In this study, a novel protein was isolated from C. quercifolius seeds and characterized by its molecular weight, primary structure, isoelectric point (pI), and carbohydrate content. The hypoglycemic activity of this protein was investigated by in vitro assay with the RIN-5F glucose-responsive cell line and in vivo test using alloxan-induced diabetic mice models. In addition, safe use of the protein was also investigated by cytotoxicity, hemagglutinating, and immunogenicity assays. The protein which was named Cq-IMP (Cnidoscolus quercifolius - Insulin Mimetic Protein) showed a single 11.18 KDa glycopolypeptide chain (16.4% of carbohydrates, m/m), pI of 8.0 and N-terminal sequence (TKDPELKQcKKQQKKqQQYDDDDKK) with similarity around 46-62% to sucrose binding protein-like and vicilin-like protein that was confirmed by mass spectrometry tryptic peptides analysis. Besides that, Cq-IMP presented anti-insulin antibody cross-reactivity as hypoglycemic activity in both in vitro and in vivo models. Additionally, it did not present any toxicity by methods tested. In conclusion, Cq-IMP is an insulin-mimetic protein, with a potent hypoglycemic activity and no toxicity showing great potential for therapeutic applications and drug development.

An aptasensor strip-based colorimetric determination method for kanamycin using cellulose acetate nanofibers decorated DNA-gold nanoparticle bioconjugates

The preparation of portable colorimetric biosensor strips is described by combining aptamer-immobilized electrospun nanofiber membranes (A-NFMs) with signal probes (DNA-conjugated gold nanoparticles (AuNPs)) for determination of kanamycin (KMC) as a model analyte. The A-NFMs were decorated with complementary single-stranded DNA (cDNA) of KMC aptamer-conjugated AuNPs (cDNA@Au) to get the colorimetric biosensor strips. The constructed biosensor strips showed a significant absorbance decreasing band at 510 nm which induce a visual color change from pink to white when exposed to KMC, with a low detection limit of 2.5 nM (at S/N = 3). The effect is due to disassembling of cDNA@Au from NFMs in the presence of KMC because the aptamer has a higher affinity to KMC than its complementary DNA, which resulted in replacing cDNA@Au with KMC. Satisfactory performance was observed in real sample (drinking water and milk) analysis with a recovery of 98.9-102.2%. The constructed colorimetric biosensor test strips hold great application promise for food safety control. Graphical abstract Schematic representation of biosensor strips for kanamycin detection prepared with the cDNA@Au immobilized aptamer-based cellulose acetate nanofibers.

Establishment and Application of Peristaltic Human Gut-Vessel Microsystem for Studying Host-Microbial Interaction

Intestinal floras influence a lot of biological functions of the organism. Although animal model are strong tools for researches on the relationship between host and microbe, a physiologically relevant in vitro human gut model was still required. Here, a novel human gut-vessel microfluidic system was established to study the host–microbial interaction. Peristaltic motion of the cells on the chip was driven by a pneumatic pump. When intestinal epithelial cells (Caco2) were co-cultured with vascular endothelial cells (HUVECs) on the peristaltic microfluidic chip, Caco2 showed normal barrier and absorption functions after 5 days cultivation, which generally took 21 days in static Transwell models. Intestinal microvilli and glycocalyx layer were seen after 4 days cultivation, and Lactobacillus casei was successfully co-cultured for a week in the intestinal cavity. A model for intestinal damage and inflammatory responses caused by E. coli was set up on this chip, which were successfully suppressed by Lactobacillus casei or antibiotic. In summary, this human gut-vessel microfluidic system showed a good potential for investigating the host–microbial interaction and the effect and mechanism of microbiome on intestinal diseases in vitro.

Mechanisms of Action for Antimicrobial Peptides With Antibacterial and Antibiofilm Functions

The antibiotic crisis has led to a pressing need for alternatives such as antimicrobial peptides (AMPs). Recent work has shown that these molecules have great potential not only as antimicrobials, but also as antibiofilm agents, immune modulators, anti-cancer agents and anti-inflammatories. A better understanding of the mechanism of action (MOA) of AMPs is an important part of the discovery of more potent and less toxic AMPs. Many models and techniques have been utilized to describe the MOA. This review will examine how biological assays and biophysical methods can be utilized in the context of the specific antibacterial and antibiofilm functions of AMPs.

Antibiotic chemotherapy against heterogeneous pathogen populations in complex host tissues

Antibiotic chemotherapy effectively cures many infections caused by susceptible bacterial pathogens. However, in some cases, even extended treatment duration does not completely eradicate the pathogenic bacteria from host tissues. A common model for underlying mechanisms assumes the stochastic formation of bacterial persisters similar to observations in laboratory cultures. However, alternative explanations related to the complexity of infected host tissues could also be relevant. We discuss several of these aspects and emphasize the need for integrated analysis as a basis for new control strategies.