A microbial fuel cell system with manganese dioxide/titanium dioxide/graphitic carbon nitride coated granular activated carbon cathode successfully treated organic acids industrial wastewater with residual nitric acid

Integrated system of electro-catalytic oxidation and microbial fuel cells for the treatment of recalcitrant wastewater

The emission of recalcitrant wastewater poses serious threats to the environment. In this study, an integrated approach combining electrocatalytic oxidation (EC) for pretreatment and microbial fuel cells (MFC) for thorough pollutant degradation is proposed to ensure efficient degradation of target substances, with low energy input and enhanced bioavailability of refractory organics. When phenol was used as the pollutant, an initial concentration of 2000 mg/L phenol solution underwent EC treatment under constant current-exponential attenuation power supply mode, resulting in a COD removal rate of 54.53%, and a phenol degradation rate of 99.83%. Intermediate products such as hydroquinone and para-diphenol were detected in the solution. After subsequent MFC treatment, only minor amounts of para-diphenol were left, and the degradation rate of phenol and its intermediate products reached 100%, with an output power density of 110.4 mW m-2. When coal chemical wastewater was used as the pollutant, further examination of the EC-MFC system performance showed a COD removal rate of 49.23% in the EC section, and a 76.21% COD removal rate in the MFC section, with an output power density of 181.5 mW m-2. Microbiological analysis revealed typical electrogenic bacteria (such as Pseudomonas and Geobacter), and specific degrading functional bacteria (such as Stenotrophomonas, Delftia, and Brevundimonas). The dominant microbial communities and their proportions adapted to environmental changes in response to the variation of carbon sources.

Sustainable management of tea wastes: resource recovery and conversion techniques

As the demand for tea (Camellia sinensis) has grown across the world, the amount of biomass waste that has been produced during the harvesting process has also increased. Tea consumption was estimated at about 6.3 million tonnes in 2020 and is anticipated to reach 7.4 million tonnes by 2025. The generation of tea waste (TW) after use has also increased concurrently with rising tea consumption. TW includes clipped stems, wasted tea leaves, and buds. Many TW-derived products have proven benefits in various applications, including energy generation, energy storage, wastewater treatment, and pharmaceuticals. TW is widely used in environmental and energy-related applications. Energy recovery from low- and medium-calorific value fuels may be accomplished in a highly efficient manner using pyrolysis, anaerobic digestion, and gasification. TW-made biochar and activated carbon are also promising adsorbents for use in environmental applications. Another area where TW shows promise is in the synthesis of phytochemicals. This review offers an overview of the conversion procedures for TW into value-added products. Further, the improvements in their applications for energy generation, energy storage, removal of different contaminants, and extraction of phytochemicals have been reviewed. A comprehensive assessment of the sustainable use of TWs as environmentally acceptable renewable resources is compiled in this review.

Co-Fe-N@biochar anode for improvment the electricity generation performance of microbial fuel cell

Microbial fuel cells (MFCs) can generate energy while processing organic pollutants, which has a great impact on environmental wastewater treatment applications. In this study, a gel polymer was formed by Co-Fe-N co-doping biochar (Co-Fe-N@BC), which was used as the anode material to improve the electricity generation performance of MFC. The Co-Fe-N@BC material prepared at 900℃ carbonised biomass into more graphitic carbon, and its total resistance (3.56 Ω) was significantly reduced. In the corresponding dual-chamber MFC, the current density was 2.81 A/m2, and the power density reached 1181 mW/m2 at maximum. Among the materials tested, the Co-Fe-N@BC anode MFC had the highest chemical oxygen demand removal rate and coulombic efficiency, reaching 91% and 13%, respectively. It is proved that MFC with Co-Fe-N@BC anode has the best electrochemical performance.

Hyperoxidation active species produced by seawater electro membrane reactor assisted electrolytic cell system for simultaneous decyanation and carbon removal

Herein, a novel triple-layered heterojunction catalytic cathode membrane (PVDF/rGO/TFe/MnO2, TMOHccm) was reported and applied in seawater electro membrane reactor assisted electrolytic cell system (SEMR-EC), achieving increased properties for cyanide wastewater treatment. Hydrophilic TMOHccm exhibits higher electrochemical activity (qT* 1.11 C cm-2, qo* 0.03 C cm-2), indicating excellent electron transfer efficiency. Further analysis shows a one-electron redox cycle of exposed transition metal oxides (TMOs) on rGO support mediated oxygen reduction reaction (ORR) process, and calculated results of density functional theory (DFT) demonstrates positive Bader charge (72 |e|) of synthesized catalyst. The developed SEMR-EC was implemented in intermittent-stream operation for treating cyanide wastewater, the system achieved optimized decyanation and carbon removal performance (CN- 100%, TOC 88.49%). Hyperoxidation active species produced SEMR-EC including hydroxyl, sulfate, and reactive chlorine species (RCS) was confirmed. The proposed mechanistic explanation indicated multiple removal pathways relevant to cyanide, organic matter, and iron were elucidated, and the engineering applications prospects were highlighted by cost (5.61 $) and benefit (Ce 399.26 mW m-2 $-1, EFe 248.11 g kWh-1) analysis of the system.

Examining current trends and future outlook of bio-electrochemical systems (BES) for nutrient conversion and recovery: an overview

Nutrient-rich waste streams from domestic and industrial sources and the increasing application of synthetic fertilizers have resulted in a huge-scale influx of reactive nitrogen and phosphorus in the environment. The higher concentrations of these pollutants induce eutrophication and foster degradation of aquatic biodiversity. Besides, phosphorus being non-renewable resource is under the risk of rapid depletion. Hence, recovery and reuse of the phosphorus and nitrogen are necessary. Over the years, nutrient recovery, low-carbon energy, and sustainable bioremediation of wastewater have received significant interest. The conventional wastewater treatment technologies have higher energy demand and nutrient removal entails a major cost in the treatment process. For these issues, bio-electrochemical system (BES) has been considered as sustainable and environment friendly wastewater treatment technologies that utilize the energy contained in the wastewater so as to recovery nutrients and purify wastewater. Therefore, this article comprehensively focuses and critically analyzes the potential sources of nutrients, working mechanism of BES, and different nutrient recovery strategies to unlock the upscaling opportunities. Also, economic analysis was done to understand the technical feasibility and potential market value of recovered nutrients. Hence, this review article will be useful in establishing waste management policies and framework along with development of advanced configurations with major emphasis on nutrient recovery rather than removal from the waste stream.

Bioelectrochemical systems for enhanced nitrogen removal with minimal greenhouse gas emission from carbon-deficient wastewater: A review

Nitrogen pollution and the rising amount of wastewater generation are calling for advanced wastewater treatments, which is particularly necessary for carbon-deficient wastewater that contains multi-species inorganic nitrogen, since conventional heterotrophic denitrification processes cannot remove nitrogen completely when carbon sources are insufficient. For that, bioelectrochemical systems (BES) have been recently developed because they can simultaneously produce electricity and remove resistant nitrogen from the carbon-deficient wastewater. However, the simultaneous removal of multi-species inorganic nitrogen cannot be achieved by electroautotrophic denitrification using BES alone. Moreover, the efficiency of nitrogen removal and power generation has been thwarted by the low energy output, high internal resistance of the device, and electron competition in non-denitrification pathways. This review article discusses the latest developments for nitrogen removal through BES-enhanced denitrification and elucidates multiple coupled BES-based denitrification pathways to remove multi-species inorganic nitrogen simultaneously. Focus points of the research area include coupling BES technologies with emerged methods, electron transfer enhancement, and avoiding electron competition that improves performance with less cost. The prospect of reducing emissions of greenhouse gases is also critically reviewed, in the hope of reducing potential intermediate products of denitrification, such as nitrous oxide (a potent greenhouse gas), through multi-factor regulation. We imply that BES is a good choice for future scale-up applications of MFC coupled with MEC to treat carbon-deficient wastewater. Overall, this review will provide useful information for the development of advanced technologies to treat carbon-deficient wastewater with less emission of greenhouse gases.

A review on graphene / graphene oxide supported electrodes for microbial fuel cell applications: Challenges and prospects

Microbial Fuel Cell (MFC) has gained great interest as an alternative green technology for bioenergy generation along with reduced sludge production, nutrient recovery, removal of COD and color, etc. during wastewater treatment. However, the MFC has several challenges for real-time applications due to less power output and high ohmic resistance and fabrication (electrode and membrane) cost. Several kinds of research have been carried out to increase energy production by reducing various losses associated with electrodes in the MFC. Though, carbonaceous electrodes (carbon and graphite) are the key materials for the anode and cathode side, since these have a higher surface area, good biocompatibility, low cost, and good mechanical strength. Graphene or graphene oxide-based nanocomposite can be an ideal substitute for electrode modifications and an alternative for an expensive anode and cathode catalyst in MFC. Graphene oxide synthesis from waste material such as waste biomass, agricultural, plastic waste, etc. is added advantages of minimizing the cost of the electrodes. But, the synthesis of graphene is quite expensive and has limitations in economic feasibility for bioelectricity production in MFC. Hence, the present review deals with the anode and cathode electrode modification with graphene-based nanocomposites, synthesis of graphene/graphene oxide from various raw materials, and its application in MFC. The current challenges and future outlook on graphene-based composites on MFC performance are also discussed.

Sustainable bioelectricity generation using Cladophora sp. as a biocathode in membrane-less microbial fuel cell

In this study, the Cladophora sp. is used to provide oxygen to the cathode of the photosynthetic biocathode membrane-less microbial fuel cell (PB-MLMFC). Non-aerated (NA-MLMFC) and mechanically-aerated (MA-MLMFC) MLMFCs are operated under similar operating conditions to evaluate the performance of PB-MLMFC with the presence of Cladophora sp. The PB-MLMFC exhibits the highest dissolved oxygen (DO) concentration, which results in a more efficient oxygen reduction reaction and a significant improvement in the electricity generation performance. The maximum power density of PB-MLMFC is 619.1 mW m^-2, which is the highest power density known to be reported for algal cathode MFCs in the literature. The electrochemical analysis shows that theCladophora sp.reduces the charge (R_ct) and mass transfer (R_mt) resistances of the PB-MLMFC, and improves the bioelectrochemical activity of the anode microorganisms. The study reveals that Cladophora sp. provides a cost-effective and renewable approach for practical applications of MLMFCs.

Self-sustained recovery of silver with stainless-steel based Cobalt/Molybdenum/Manganese polycrystalline catalytic electrode in bio-electroreduction microbial fuel cell (BEMFC)

In this study, a novel bio-electroreduction microbial fuel cell (BEMFC) assisted by stainless-steel based Cobalt/Molybdenum/Manganese (Co/Mo/Mn-SS) polycrystalline catalytic electrode was used to achieve high recovery to silver. The exoelectrogens (Shewanella sp. etc.) using organic wastewater (the inflow was controlled at 1.2 L d^-1) as nutrient matrix in the anode chamber generated electrons, while silver ions were simultaneously electroreduced and electrodeposited on the surface of the catalytic electrode as electron acceptors. Silver nanoplates could be observed directly. The products of electroreduction on the cathode were analyzed by Scanning Electron Microscopy (SEM), Transmission Electron Microscope (TEM), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffractometer (XRD), and the results of electrochemical characterization confirmed the existence of silver in the products. In the operation, the silver ions were in-situ recovered and enriched from the initial concentration of 20-300 mg L^-1 to almost complete recovery (8-18 h), with the maximum power density of 1008.2 mW m^-2 and 5.5 A m^-2 current density. The recovery efficiency of silver in the BEMFC using the Co/Mo/Mn-SS electrode was up to 9.60 kg m^-2h^-1, and the energy efficiency was 27.8 kg kWh^-1. Under the continuous flow operation mode, the BEMFC still achieved 90.2% recovery efficiency of the silver.

A comprehensive review on emerging trends in industrial wastewater research

Rapid industrialization is one of the intricate factors that is linked to the depletion of water resources and increased generation of wastewater. Due to various obstructions and impediments, such as ineffective treatment solutions, exorbitant prices, lack of basic amenities, insufficient financial assistance, and technical expertise, sustainable treatment of industrial effluents has become an onerous process in most parts of the world. The majority of current treatment solutions are conventional and outdated, and thus fall short to remove all the contaminants efficiently from the industrial wastewater. Moreover, poorly treated or untreated industrial effluents are indiscriminately dumped into water bodies such as lakes, ponds, and rivers, causing substantial health hazards to humans and animals and serious threats to the aquatic ecosystem. Thus, there is a need for highly efficient, cost-effective, and sustainable technologies for the treatment of industrial wastewater. Employment of microbial technologies such as microbial fuel cells and microalgal technologies, treatment of wastewater can be coupled with the production of bioelectricity and valuable biomass, respectively. Moreover, with nanofiltration and biochar technologies, the efficiency of the overall treatment procedure can be increased to a greater extent. The present review aims to highlight opportunities and challenges associated with some of the emerging trends in industrial wastewater research.

Three-dimensional biofilm electrode reactors (3D-BERs) for wastewater treatment

Three-dimensional biofilm electrode reactors (3D-BERs) are highly efficient in refractory wastewater treatment. In comparison to conventional bio-electrochemical systems, the filled particle electrodes act as both electrodes and microbial carriers in 3D-BERs. This article reviews the conception and basic mechanisms of 3D-BERs, as well as their current development. The advantages of 3D-BERs are illustrated with an emphasis on the synergy of electricity and microorganisms. Electrode materials utilized in 3D-BERs are systematically summarized, especially the critical particle electrodes. The configurations of 3D-BERs and their integration with wastewater treatment reactors are introduced. Operational parameters and the adaptation of 3D-BERs to varieties of wastewater are discussed. The prospects and challenges of 3D-BERs for wastewater treatment are then presented, and the future research directions are proposed. We believe that this timely review will help to attract more attentions on 3D-BERs investigation, thus promoting the potential application of 3D-BERs in wastewater treatment.

Improved performance and cost efficiency by surface area optimization of granular activated carbon in air-cathode microbial fuel cell

Microbial fuel cell (MFC) architectural modification is increasingly becoming an important area of research due to the need to improve energy recovery. This study presents a low-cost modification method of the anode that does not require pre-treatment-step involving hazardous chemicals to improve performance. The modification step involves deposition of granular activated carbon (GAC) which is highly conductive and provides a high specific surface area inside a carbon cloth that acts as an anode and as a supporting material. The GAC particle size of 0.6-1.1 mm resulted in an increase in air-cathode MFC performance due to an increase in available surface area of 879.5 m² g^-1 for attachment of cells based on Brunauer, Emmett, and Teller (BET) results, and an increase in the appropriate surface for attachment of cells which was rough based on the scanning electron microscope (SEM) results. On the other hand, although GAC with size of particles of 0.45-0.6 mm had the highest available surface area for attachment of cells, it lacked the appropriate surface for attachment of cells and reduced MFC performance. This means that particle size optimization of GAC is essential since there is a limit to which the particle diameter can be reduced. The utilization of the GAC with the optimized particle size produced an output voltage of 507.5 mV and maximum power output of 1287.7 mW m^-3 at current output of 2537.5 mA m^-3. This study also showed that there is an economic benefit in modifying carbon cloth using GAC with optimized particle size.

Carbon Nanotube/Pt Cathode Nanocomposite Electrode in Microbial Fuel Cells for Wastewater Treatment and Bioenergy Production

In this paper, we reported the fabrication, characterization, and application of carbon nanotube (CNT)-platinum nanocomposite as a novel generation of cathode catalyst in microbial fuel cells (MFCs) for sustainable energy production and wastewater treatment. The efficiency of the carbon nanocomposites was compared by platinum (Pt), which is the most effective and common cathode catalyst. This nanocomposite is utilized to benefit from the catalytic properties of CNTs and reduce the amount of required Pt, as it is an expensive catalyst. The CNT/Pt nanocomposites were synthesized via a chemical reduction technique and the electrodes were characterized by field emission scanning electron microscopy, electronic dispersive X-Ray analysis, and transmission electron microscopy. The nanocomposites were applied as cathode catalysts in the MFC to obtain polarization curve and coulombic efficiency (CE) results. The catalytic properties of electrodes were tested by linear sweep voltammetry. The CNT/Pt at the concentration of 0.3 mg/cm2 had the highest performance in terms of CE (47.16%), internal resistance (551 Ω), COD removal (88.9%), and power generation (143 mW/m2). In contrast, for the electrode with 0.5 mg/L of Pt catalyst, CE, internal resistance, COD removal, and power generation were 19%, 810 Ω, 96%, and 84.1 mW/m2, respectively. So, it has been found that carbon nanocomposite cathode electrodes had better performance for sustainable clean energy production and COD removal by MFC.

Challenges and opportunities for the biodegradation of chlorophenols: Aerobic, anaerobic and bioelectrochemical processes

Chlorophenols (CPs) are highly toxic and refractory contaminants which widely exist in various environments and cause serious harm to human and environment health and safety. This review provides comprehensive information on typical CPs biodegradation technologies, the most green and benign ones for CPs removal. The known aerobic and anaerobic degradative bacteria, functional enzymes, and metabolic pathways of CPs as well as several improving methods and critical parameters affecting the overall degradation efficiency are systematically summarized and clarified. The challenges for CPs mineralization are also discussed, mainly including the dechlorination of polychlorophenols (poly-CPs) under aerobic condition and the ring-cleavage of monochlorophenols (MCPs) under anaerobic condition. The coupling of functional materials and degraders as well as the operation of sequential anaerobic-aerobic bioreactors and bioelectrochemical system (BES) are promising strategies to overcome some current limitations. Future perspective and research gaps in this field are also proposed, including the further understanding of microbial information and the specific role of materials in CPs biodegradation, the potential application of innovative biotechnologies and new operating modes to optimize and maximize the function of the system, and the scale-up of bioreactors towards the efficient biodegradation of CPs.

Successful bio-electrochemical treatment of nitrogenous mariculture wastewater by enhancing nitrogen removal via synergy of algae and cathodic photo-electro-catalysis

Systems with catalytic cathode in microbial fuel cell can achieve high treatment efficiency enhanced by the cathode. Such bio-electrochemical systems have potential applications in treating high-salinity nitrogenous mariculture wastewater. For sustainable development of the mariculture industry, enhancing inorganic nitrogen removal is of vital importance due to the low carbon to nitrogen (C/N) ratio of wastewater and strict discharge standard. Herein, simulated mariculture wastewater (high salinity, low COD/N ratio of 0.5-1.0) was successfully treated in an integrated self-biased bio-electrochemical system, with catalyst (TiO₂/Co-WO₃/SiC) on the cathode and natural-grown algae in the cathode chamber. Satisfactory nitrogen removal (94.05% NH₄⁺-N and 77.35% inorganic nitrogen) and favorable 76.66% removal of organics (UV₂₅₄) were both achieved, with visible light illumination. The NH₄⁺-N in the effluent was below 2 mg L^-1. The synergy of bacteria, algae and cathode, promoted pollutant removal, and made the system sustainable and efficient in treating mariculture wastewater.