A pre-clinical murine model of oral implant osseointegration

Osteogenic effect of low-intensity pulsed ultrasound on peri-implant bone: A systematic review and meta-analysis

Purpose This study aimed to evaluate the effect of low-intensity pulsed ultrasound (LIPUS) on promoting osseointegration around dental implants.Study selection A comprehensive search was performed on two databases, including MEDLINE (PubMed) and Web of Science to identify relevant studies published before June 1, 2022. Randomized controlled trials that met the inclusion criteria were selected for the study. The year of publication, study design, animal species, number of animals, number of implants, implant position, implant size, intervention, follow-up time, bone volume ratio (BV/TV), bone-implant contact ratio (BIC), and implant removal torque value (RTV) measurements, including mean and SD, were extracted.Results Ten randomized trials were included in this meta-analysis. The results showed that LIPUS significantly promoted osteogenesis around dental implants. Furthermore, in animal models of pre-existing diseases such as osteoporosis and diabetes, LIPUS had the same effect. The included data were divided into subgroups to explore the effects of different follow-up time, acoustic intensities, and frequencies. Results showed that higher acoustic intensities and frequencies significantly improve the osteogenic effects of LIPUS. There was some degree of heterogeneity owing to bias in the included studies. More high-quality randomized controlled trials are necessary in the future.Conclusions LIPUS can promote bone healing around dental implants and is an attractive option for edentulous patients, especially those with pre-existing diseases. Further clinical trials on the use of LIPUS in implant dentistry are warranted. Furthermore, future studies must pay more attention to acoustic intensity and frequency.

Antibiotic prophylaxis dysregulates dental implant placement surgery-induced osteoimmune wound healing and attenuates the alveolar bone-implant interface in mice

AIM

Antimicrobial-induced shifts in commensal oral microbiota can dysregulate helper T-cell oral immunity to affect osteoclast-osteoblast actions in alveolar bone. Antibiotic prophylaxis is commonly performed with dental implant placement surgery to prevent post-surgical complications. However, antibiotic prophylaxis effects on osteoimmune processes supporting dental implant osseointegration are unknown. The aim of the study was to discern the impact of antibiotic prophylaxis on dental implant placement surgery-induced osteoimmune wound healing and osseointegration.

MATERIALS AND METHODS

We performed SHAM or dental implant placement surgery in mice. Groups were administered prophylactic antibiotics (amoxicillin or clindamycin) or vehicle. Gingival bacteriome was assessed via 16S sequencing. Helper T-cell oral immunity was evaluated by flow cytometry. Osteoclasts and osteoblasts were assessed via histomorphometry. Implant osseointegration was evaluated by micro-computed tomography.

RESULTS

Dental implant placement surgery up-regulated TH 1, TH 2 and TREG cells in cervical lymph nodes (CLNs), which infers helper T-cell oral immunity contributes to dental implant placement osseous wound healing. Prophylactic antibiotics with dental implant placement surgery caused a bacterial dysbiosis, suppressed TH 1, TH 2 and TREG cells in CLNs, reduced osteoclasts and osteoblasts lining peri-implant alveolar bone, and attenuated the alveolar bone-implant interface.

CONCLUSIONS

Antibiotic prophylaxis dysregulates dental implant placement surgery-induced osteoimmune wound healing and attenuates the alveolar bone-implant interface in mice.

Influence of Reactive Oxygen Species on Wound Healing and Tissue Regeneration in Periodontal and Peri-Implant Tissues in Diabetic Patients

Diabetes mellitus (DM) is associated with periodontal disease. Clinically, periodontal treatment is less effective for patients with DM. Oxidative stress is one of the mechanisms that link DM to periodontitis. The production of reactive oxygen species (ROS) is increased in the periodontal tissues of patients with DM and is involved in the development of insulin resistance in periodontal tissues. Insulin resistance decreases Akt activation and inhibits cell proliferation and angiogenesis. This results in the deterioration of wound healing and tissue repair in periodontal tissues. Antioxidants and insulin resistance ameliorants may inhibit ROS production and improve wound healing, which is worsened by DM. This manuscript provides a comprehensive review of the most recent basic and clinical evidence regarding the generation of ROS in periodontal tissues resulting from microbial challenge and DM. This study also delves into the impact of oxidative stress on wound healing in the context of periodontal and dental implant therapies. Furthermore, it discusses the potential benefits of administering antioxidants and anti-insulin resistance medications, which have been shown to counteract ROS production and inflammation. This approach may potentially enhance wound healing, especially in cases exacerbated by hyperglycemic conditions.

Wnt/β-Catenin Signaling in Craniomaxillofacial Osteocytes

PURPOSE OF REVIEW

There is a growing appreciation within the scientific community that cells exhibit regional variation. Whether the variation is attributable to differences in embryonic origin or anatomical location and mechanical loading has not been elucidated; what is clear, however, is that adult cells carry positional information that ultimately affects their functions. The purpose of this review is to highlight the functions of osteocytes in the craniomaxillofacial (CMF) skeleton as opposed to elsewhere in the body, and in doing so gain mechanistic insights into genetic conditions and chemically-induced diseases that particularly affect this region of our anatomy.

RECENT FINDINGS

In the CMF skeleton, elevated Wnt/β-catenin signaling affects not only bone mass and volume, but also mineralization of the canalicular network and osteocyte lacunae. Aberrant elevation in the Wnt/β-catenin pathway can also produce micropetrosis and osteonecrosis of CMF bone, presumably due to a disruption in the signaling network that connects osteocytes to one another, and to osteoblasts on the bone surface.

Effects of Dicationic Imidazolium-Based Ionic Liquid Coatings on Oral Osseointegration of Titanium Implants: A Biocompatibility Study in Multiple Rat Demographics

Dicationic imidazolium-based ionic liquids with amino acid anions, such as IonL-phenylalanine (IonL-Phe), have been proposed as a multifunctional coating for titanium (Ti) dental implants. However, there has been no evaluation of the biocompatibility of these Ti coatings in the oral environment. This study aims to evaluate the effects of IonL-Phe on early healing and osseointegration of Ti in multiple rat demographics. IonL-Phe-coated and uncoated Ti screws were implanted into four demographic groups of rats to represent biological variations that could affect healing: young males (YMs) and females (YFs), ovariectomized (OVXFs) females, and old males (OMs). Samples underwent histopathological and histomorphometric analysis to evaluate healing at 7 and 30 days around IonL-coated and uncoated Ti. The real-time quantitative polymerase chain reaction was also conducted at the 2- and 7-day YM groups to evaluate molecular dynamics of healing while the IonL-Phe was present on the surface. IonL-coated and uncoated implants demonstrated similar histological signs of healing, while coated samples’ differential gene expression of immunological and bone markers was compared with uncoated implants at 2 and 7 days in YMs. While YMs presented suitable osseointegration for both uncoated and IonL-Phe-coated groups, decreased success rate in other demographics resulted from lack of supporting bone in YFs and poor bone quality in OVXFs and OMs. Overall, it was found that IonL-coated samples had increased bone-to-implant contact across all demographic groups. IonL-Phe coating led to successful osseointegration across all animal demographics and presented the potential to prevent failures in scenarios known to be challenged by bacteria.

Effects of masticatory loading on bone remodeling around teeth vs. implants: insights from a preclinical model

OBJECTIVES

Teeth connect to bone via a periodontal ligament whereas implants connect to bone directly. Consequently, masticatory loads are distributed differently to periodontal versus peri-implant bone. Our objective was to determine how masticatory loading of an implant versus a tooth affected peri-implant versus periodontal bone remodeling. Our hypothesis was that strains produced by functional loading of an implant would be elevated compared to the strains around teeth, and that this would stimulate a greater degree of bone turnover around implants versus in periodontal bone.

MATERIALS AND METHODS

Sixty skeletally mature mice were divided into two groups. In the Implant group, maxillary first molars (mxM1) were extracted, and after socket healing, titanium alloy implants were positioned sub-occlusally. After osseointegration, implants were exposed, resin crowns were placed, and masticatory loading was initiated. In a Control group the dentition was left intact. Responses of peri-implant and periodontal bone were measured using micro-CT, histology, bone remodeling assays, and quantitative histomorphometry while bone strains were estimated using finite element (FE) analyses.

CONCLUSIONS

When a submerged osseointegrated implant is exposed to masticatory forces peri-implant strains are elevated, and peri-implant bone undergoes significant remodeling that culminates in new bone accrual. The accumulation of new bone functions to reduce both peri-implant strains and bone remodeling activities, equivalent to those observed around the intact dentition.

Impaired dental implant osseointegration in rat with streptozotocin-induced diabetes

OBJECTIVE

Few studies have reported on the impact of oxidative stress on the dental implant failure. The aim of this study was to investigate the impact of hyperglycemia-induced oxidative stress on dental implant osseointegration in diabetes mellitus (DM).

METHODS

Acid-treated titanium implants were bilaterally placed in the maxillary alveolar ridge of streptozotocin-induced diabetic (DM group) and control rats after extraction of first molars. Histological analysis and micro-push-out test were performed 4 weeks after surgery. Oxidative stress and osteogenic markers in the surrounding bone were quantified by real-time polymerase chain reaction. In the in vitro study, rat bone marrow-derived mesenchymal stem cells (BMMSCs) were cultured on acid-treated titanium discs in a high-glucose (HG) or normal environment. Intracellular reactive oxygen species (ROS), cell proliferation, alkaline phosphatase (ALP) activity, and extracellular calcification were evaluated following antioxidant treatment with N-acetyl-L-cysteine (NAC).

RESULTS

The implant survival rate was 92.9% and 75.0% in control and DM group, respectively. Bone-implant contact and push-out loads were significantly lower in the DM group. Expression of superoxide dismutase 1 at the mRNA level and on immunohistochemistry was significantly lower in the DM group. In vitro experiments revealed that the HG condition significantly increased ROS expression and suppressed the proliferation and extracellular calcification of BMMSCs, while NAC treatment significantly restored ROS expression, cell proliferation, and calcification. The ALP activity of both groups was not significantly different.

CONCLUSION

In diabetes, high-glucose-induced oxidative stress downregulates proliferation and calcification of BMMSCs, impairing osseointegration and leading to implant failure.

The role of forkhead box class O1 during implant osseointegration

FOXO1, a member of the forkhead family of transcription factors, plays a vital role in the osteogenic lineage commitment of mesenchymal stem cells, and affects multiple cellular functions of osteogenic cells. However, prior studies have focused on mesenchymal stem cells but not on differentiated osteoblasts. In addition, studies about the role of FOXO1 during osseointegration are lacking. In this present study, we constructed osteoblast conditional FOXO1 knock-out mice and lentivirus-mediated FoxO1 overexpression to investigate maxillary titanium implant osseointegration. After 4 wk post implant placement, micro-computed tomography, histomorphometric analyses, and RT-qPCR assays were performed. Results showed that compared with the control group, overexpression of FOXO1 significantly enhanced bone formation around implant and bone-implant contact ratio, while loss of FOXO1 impaired peri-implant osteogenesis and osseointegration. Moreover, overexpression of FoxO1 enhanced expression of osteogenesis-related genes, such as Runx2, Alp1, Col1a1, and Bglap. Whereas, knock-out of Foxo1 reduced the expression of osteogenesis-related genes. Taken together, our results suggested that FOXO1 in osteoblasts could enhance osteogenesis-related gene expression to improve osseointegration.

Pre-Clinical Models in Implant Dentistry: Past, Present, Future

Biomedical research seeks to generate experimental results for translation to clinical settings. In order to improve the transition from bench to bedside, researchers must draw justifiable conclusions based on data from an appropriate model. Animal testing, as a prerequisite to human clinical exposure, is performed in a range of species, from laboratory mice to larger animals (such as dogs or non-human primates). Minipigs appear to be the animal of choice for studying bone surgery around intraoral dental implants. Dog models, well-known in the field of dental implant research, tend now to be used for studies conducted under compromised oral conditions (biofilm). Regarding small animal models, research studies mostly use rodents, with interest in rabbit models declining. Mouse models remain a reference for genetic studies. On the other hand, over the last decade, scientific advances and government guidelines have led to the replacement, reduction, and refinement of the use of all animal models in dental implant research. In new development strategies, some in vivo experiments are being progressively replaced by in vitro or biomaterial approaches. In this review, we summarize the key information on the animal models currently available for dental implant research and highlight (i) the pros and cons of each type, (ii) new levels of decisional procedures regarding study objectives, and (iii) the outlook for animal research, discussing possible non-animal options.

Lack of 5-lipoxygenase in intramembranous and endochondral 129Sv mice skeleton and intramembranous healing

OBJECTIVE

To analyze the lack of 5-lipoxygenase (5LO) on dental socket healing and post-natal phenotype of intramembranous and endochondral bones.

DESIGN

Wild type (WT) 129/SvEv (n = 20) and 5LO knockout (5LOKO) (n = 20) male mice underwent tooth extraction of the upper right incisor and were euthanized after 7, 14, and 30 day time points for the evaluation of dental socket healing and histological phenotyping of intramembranous (IM) and endochondral (EC) bones. Microscopic analysis of alveolar sockets included histopathological description, histomorphometry, and immunohistochemistry for 5LO, cyclooxygenase 2 (COX2), and tartrate resistant acid phosphatase (TRAP).

RESULTS

Histological phenotyping revealed thicker cortical bone in EC bones (femur and vertebra) of 5LOKO mice compared to WTs, with no differences in collagenous content. Although dental socket healing was similarly observed in both groups, WT mice revealed increased numbers of COX-2+ and 5LO+ cells during bone maturing stage, with a decrease of TRAP+ cells at day 30. On the other hand, an increased quantity of fibroblasts was observed at day 7 in 5LOKO group, as well as increased inflammatory infiltrate and significantly decreased TRAP+ cells at final stages of alveolar socket healing in comparison to WTs.

CONCLUSIONS

The lack of 5LO in 5LOKO mice resulted in thicker cortical of EC, but not of IM post natal bones. Furthermore, genetic deletion of 5LO in the 5LOKO mice directly affected the inflammatory response during socket healing, influencing initial and late phases of bone repair in a model of post-tooth extraction in 129Sv WT and 5LOKO mice.

A novel surgical model for the preclinical assessment of the osseointegration of dental implants: a surgical protocol and pilot study results

BACKGROUND

Dental implants are considered the gold standard replacement for missing natural teeth. The successful clinical performance of dental implants is due to their ability to osseointegrate with the surrounding bone. Most dental implants are manufactured from Titanium and it alloys. Titanium does however have some shortcomings so alternative materials are frequently being investigated. Effective preclinical studies are essential to transfer the innovations from the benchtop to the patients. Many preclinical studies are carried out in the extra-oral bones of small animal models to assess the osseointegration of the newly developed materials. This does not simulate the oral environment where the dental implants are subjected to several factors that influence osseointegration; therefore, they can have limited clinical value.

AIM

This study aimed to develop an appropriate in-vivo model for dental implant research that mimic the clinical setting. The study evaluated the applicability of the new model and investigated the impact of the surgical procedure on animal welfare.

MATERIALS AND METHODS

The model was developed in male New Zealand white rabbits. The implants were inserted in the extraction sockets of the secondary incisors in the maxilla. The model allows a split-mouth comparative analysis. The implants' osseointegration was assessed clinically, radiographically using micro-computed tomography (µ-CT), and histologically. A randomised, controlled split-mouth design was conducted in 6 rabbits. A total of twelve implants were inserted. In each rabbit, two implants; one experimental implant on one side, and one control implant on the other side were applied. Screw-shaped implants were used with a length of 8 mm and a diameter of 2 mm.

RESULTS

All the rabbits tolerated the surgical procedure well. The osseointegration was confirmed clinically, histologically and radiographically. Quantitative assessment of bone volume and mineral density was measured in the peri-implant bone tissues. The findings suggest that the new preclinical model is excellent, facilitating a comprehensive evaluation of osseointegration of dental implants in translational research pertaining to the human application.

CONCLUSION

The presented model proved to be safe, reproducible and required basic surgical skills to perform.

Cellular and Molecular Dynamics during Early Oral Osseointegration: A Comprehensive Characterization in the Lewis Rat

OBJECTIVE

There is a need to improve the predictability of osseointegration in implant dentistry. Current literature uses a variety of in vivo titanium (Ti) implantation models to investigate failure modes and test new materials and surfaces. However, these models produce a variety of results, making comparison across studies difficult. The purpose of this study is to validate an oral osseointegration in the Lewis rat to provide a reproducible baseline to track the inflammatory response and healing of Ti implants.

METHODS

Ti screws (0.76 mm Ø × 2 mm length) were implanted into the maxillary diastema of 52 adult male Lewis rats. Peri-implant tissues were evaluated 2, 7, 14, and 30 days after implantation (n = 13). Seven of the 13 samples underwent microtomographic analysis, histology, histomorphometry, and immunohistochemistry to track healing parameters. The remaining six samples underwent quantitative polymerase chain reaction (qPCR) to evaluate gene expression of inflammation and bone remodeling markers over time.

RESULTS

This model achieved a 78.5% success rate. Successful implants had a bone to implant contact (BIC)% of 68.86 ± 3.15 at 30 days on average. Histologically, healing was similar to other rodent models: hematoma and acute inflammation at 2 days, initial bone formation at 7, advanced bone formation and remodeling at 14, and bone maturation at 30. qPCR indicated the highest expression of bone remodeling and inflammatory markers 2-7 days, before slowly declining to nonsurgery control levels at 14-30 days.

CONCLUSION

This model combines cost-effectiveness and simplicity of a rodent model, while maximizing BIC, making it an excellent candidate for evaluation of new surfaces.

Comparative analyses of the soft tissue interfaces around teeth and implants: Insights from a pre-clinical implant model

AIM

To evaluate the similarities and differences in barrier function of a peri-implant epithelium (PIE) versus a native junctional epithelium (JE).

MATERIALS AND METHODS

A mouse model was used wherein titanium implants were placed sub-occlusally in healed extraction sites. The PIE was examined at multiple timepoints after implant placement, to capture and understand the temporal nature of its assembly and homeostatic status. Mitotic activity, hemidesmosomal attachment apparatus, and inflammatory responses in the PIE were compared against a JE. Additionally, we evaluated whether the PIE developed a Wnt-responsive stem cell niche like a JE.

RESULTS

The PIE developed from oral epithelium (OE) that had, by the time of implant placement, lost all characteristics of a JE. Compared with a JE, an established PIE had more proliferating cells, exhibited lower expression of attachment proteins, and had significantly more inflammatory cells in the underlying connective tissue. Wnt-responsive cells in the OE contributed to an initial PIE, but Wnt-responsive cells and their descendants were lost as the PIE matured.

CONCLUSIONS

Although histologically similar, the PIE lacked a Wnt-responsive stem cell niche and exhibited characteristics of a chronically inflamed tissue. Both features contributed to suboptimal barrier functions of the PIE compared with a native JE.

The Special Developmental Biology of Craniofacial Tissues Enables the Understanding of Oral and Maxillofacial Physiology and Diseases

Maxillofacial hard tissues have several differences compared to bones of other localizations of the human body. These could be due to the different embryological development of the jaw bones compared to the extracranial skeleton. In particular, the immigration of neuroectodermally differentiated cells of the cranial neural crest (CNC) plays an important role. These cells differ from the mesenchymal structures of the extracranial skeleton. In the ontogenesis of the jaw bones, the development via the intermediate stage of the pharyngeal arches is another special developmental feature. The aim of this review was to illustrate how the development of maxillofacial hard tissues occurs via the cranial neural crest and pharyngeal arches, and what significance this could have for relevant pathologies in maxillofacial surgery, dentistry and orthodontic therapy. The pathogenesis of various growth anomalies and certain syndromes will also be discussed.

Enhanced Osseointegration by the Hierarchical Micro-Nano Topography on Selective Laser Melting Ti-6Al-4V Dental Implants

Currently, selective laser melting (SLM) has been thriving in implant dentistry for on-demand fabricating dental implants. Based on the coarse microtopography of SLM titanium surfaces, constructing nanostructure to form the hierarchical micro-nano topography is effective in enhancing osseointegration. Given that current nanomodification techniques of SLM implants, such as anodization and hydrothermal treatment, are facing the inadequacy in costly specific apparatus and reagents, there has been no recognized nanomodified SLM dental implants. The present study aimed to construct hierarchical micro-nano topography on self-made SLM dental implants by a simple and safe inorganic chemical oxidation, and to evaluate its contribution on osteoblastic cells bioactivity and osseointegration. The surface chemical and physical parameters were characterized by FE-SEM, EDS, profilometer, AFM, and contact angle meter. The alteration on bioactivity of MG-63 human osteoblastic cells were detected by qRT-PCR. Then the osseointegration was assessed by implanting implants on the femur condyle of New Zealand Rabbits. The hierarchical micro-nano topography was constituted by the microrough surface of SLM implants and nanoneedles (diameter: 20∼50 nm, height: 150∼250 nm), after nanomodifying SLM implants in 30% hydrogen peroxide and 30% hydrochloride acid (volume ratio 1:2.5) at room temperature for 36 h. Low chemical impurities content and high hydrophilicity were observed in the nanomodified group. Cell experiments on the nanomodified group showed higher expression of mitophagy related gene (PINK1, PARKIN, LC3B, and LAMP1) at 5 days and higher expression of osteogenesis related gene (Runx2 and OCN) at 14 days. In the early stage of bone formation, the nanomodified SLM implants demonstrated higher bone-to-implant contact. Intriguingly, the initial bone-to-implant contact of nanomodified SLM implants consisted of more mineralized bone with less immature osteoid. After the cessation of bone formation, the bone-to-implant contact of nanomodified SLM implants was equal to untreated SLM implants and marketable TixOs implants. The overall findings indicated that the inorganic chemical oxidized hierarchical micro-nano topography could enhance the bioactivity of osteoblastic cells, and consequently promote the peri-implant bone formation and mineralization of SLM dental implants. This study sheds some light on improvements in additive manufactured dental implants.

New Surgical Model for Bone-Muscle Injury Reveals Age and Gender-Related Healing Patterns in the 5 Lipoxygenase (5LO) Knockout Mouse

Signaling lipid mediators released from 5 lipoxygenase (5LO) pathways influence both bone and muscle cells, interfering in their proliferation and differentiation capacities. A major limitation to studying inflammatory signaling pathways in bone and muscle healing is the inadequacy of available animal models. We developed a surgical injury model in the vastus lateralis (VL) muscle and femur in 129/SvEv littermates mice to study simultaneous musculoskeletal (MSK) healing in male and female, young (3 months) and aged (18 months) WT mice compared to mice lacking 5LO (5LOKO). MSK defects were surgically created using a 1-mm punch device in the VA muscle followed by a 0.5-mm round defect in the femur. After days 7 and 14 post-surgery, the specimens were removed for microtomography (microCT), histopathology, and immunohistochemistry analyses. In addition, non-injured control skeletal muscles along with femur and L5 vertebrae were analyzed. Bones were microCT phenotyped, revealing that aged female WT mice presented reduced BV/TV and trabecular parameters compared to aged males and aged female 5LOKO mice. Skeletal muscles underwent a customized targeted lipidomics investigation for profiling and quantification of lipid signaling mediators (LMs), evidencing age, and gender related-differences in aged female 5LOKO mice compared to matched WT. Histological analysis revealed a suitable bone-healing process with osteoid deposition at day 7 post-surgery, followed by woven bone at day 14 post-surgery, observed in all young mice. Aged WT females displayed increased inflammatory response at day 7 post-surgery, delayed bone matrix maturation, and increased TRAP immunolabeling at day 14 post-surgery compared to 5LOKO females. Skeletal muscles of aged animals showed higher levels of inflammation in comparison to young controls at day 14 post-surgery; however, inflammatory process was attenuated in aged 5LOKO mice compared to aged WT. In conclusion, this new model shows that MSK healing is influenced by age, gender, and the 5LO pathway, which might serve as a potential target to investigate therapeutic interventions and age-related MSK diseases. Our new model is suitable for bone-muscle crosstalk studies.

Mechanoadaptive strain and functional osseointegration of dental implants in rats

Spatiotemporal implant-bone biomechanics and mechanoadaptive strains in peri-implant tissue are poorly understood. Physical and chemical characteristics of an implant-bone complex (IBC) were correlated in three-dimensional space (along the length and around a dental implant) to gather insights into time related integration of the implant with the cortical portion of a jaw bone in a rat. Rats (N = 9) were divided into three experimental groups with three rats per time point; 3-, 11-, and 24-day. All rats were fed crumbled hard pellets mixed with water (soft-food diet) for the first 3 days followed by a hard-food diet with intact hard-food pellets (groups of 11- and 24-day only). Biomechanics of the IBCs harvested from rats at each time point was evaluated by performing mechanical testing in situ in tandem with X-ray imaging. The effect of physical association (contact area) of a loaded implant with adapting peri-implant tissue, and resulting strain within was mapped by using digital volume correlation (DVC) technique. The IBC stiffness at respective time points was correlated with mechanical strain in peri-implant tissue. Results illustrated that IBC stiffness at 11-day was lower than that observed at 3-day. However, at 24-day, IBC stiffness recovered to that which was observed at 3-day. Correlative microscopy and spectroscopy illustrated that the lower IBC stiffness was constituted by softer and less mineralized peri-implant tissue that contained varying expressions of osteoconductive elements. Lower IBC stiffness observed at 11-day was constituted by less mineralized peri-implant tissue with osteoconductive elements that included phosphorus (P) which was co-localized with higher expression of zinc (Zn), and lower expression of calcium (Ca). Higher IBC stiffness at 24-day was constituted by mineralized peri-implant tissue with higher expressions of osteoconductive elements including Ca and P, and lower expressions of Zn. These spatiotemporal correlative maps of peri-implant tissue architecture, heterogeneous distribution of mineral density, and elemental colocalization underscore mechanoadaptive physicochemical properties of peri-implant tissue that facilitate functional osseointegration of an implant. These results provided insights into 1) plausible "prescription" of mechanical loads as an osteoinductive "therapeutic dose" to encourage osteoconductive elements in the peri-implant tissue that would facilitate functional osseointegration of the implant; 2) a "critical temporal window" between 3 and 11 days, and perhaps it is this acute phase during which key candidate regenerative molecules can be harnessed to accelerate osseointegration of an implant under load.

Similitude of cement-bone micromechanics in cemented rat and human knee replacement

A preclinical rat knee replacement model was recently developed to explore the biological and mechanobiological changes of trabecular resorption for cement-bone interdigitated regions. The goal here was to evaluate the relevance of this model compared with human knee replacement with regards to functional micromechanics. Eight nonsurvival, cemented knee replacement surgeries were performed, the interdigitated gap morphology was quantified, and interface micromotion between cement and bone was measured for 1 to 5 bodyweight loading. Computational fluid dynamics modeling of unit cell geometries with small gaps between trabeculae and cement was used to estimate fluid flow. Gap width (3.6 μm) was substantially smaller compared with cement-bone gaps reported in human knee replacement (11.8 μm). Micromotion at the cement-bone border was also decreased for the rat knee replacement (0.48 μm), compared with human (1.97 μm), for 1 bodyweight loading. However, the micromotion-to-gap width ratio (0.19 and 0.22 for, rat and human), and estimated fluid shear stress (6.47 and 7.13 Pa, for rat and human) were similar. Replicating the fluid dynamic characteristics of cement-bone interdigitated regions in human knee replacements using preclinical models may be important to recapitulate trabecular resorption mechanisms due to proposed supraphysiologic fluid shear stress. Statement of clinical significance: local cement-bone micromotion due to joint loading may contribute to the process of clinical loosening in total joint replacements. This work shows that while micromotion and gap morphology are diminished for the rat knee model compared to human, the motion-to-gap ratio, and corresponding fluid shear stress are of similar magnitudes.

The role of USP34 in the fixation of titanium implants in murine models

Ubiquitin-specific protease 34 (USP34), a member of the ubiquitin-specific protease family, regulates osteogenic differentiation of bone marrow mesenchymal stem cells via bone morphogenetic protein signaling. This study aimed to investigate the role of USP34 in fixation of titanium implants in mouse models. Eight-week-old Usp34-knockout (Prx1-Cre;Usp34^f/f ) mice and their Usp34 wild-type (Usp34^f/f ) control littermates were used. Experimental titanium implants were inserted into the distal ends of femurs and the edentulous area of maxillae. Two and four weeks after surgery, samples of femur and maxilla were obtained, and micro-computed tomography scanning, histomorphometric analyses, and push-in tests were performed on the samples. Compared with controls, Prx1-Cre;Usp34^f/f mice showed reduced bone volume for both femurs and maxillae; a decreased femoral bone-implant contact ratio (BIC) at 2 wk [mean (standard error of the mean): 62.17% (2.15%) vs. 44.06% (3.45%)] and 4 wk [72.46% (1.61%) vs. 64.53% (1.93%)]; decreases in femoral bone volume fraction (BV/TV) and push-in resistance; and lower BIC and BV/TV of the maxillae. Taken together, our data demonstrate that specific deletion of Usp34 in mesenchymal stem cells impairs fixation of titanium implants in mice.

Low-intensity pulsed ultrasound improves osseointegration of dental implant in mice by inducing local neuronal production of αCGRP

OBJECTIVE

This study aimed to explore the effect of Low-intensity pulsed ultrasound (LIPUS) on implant osseointegration and elucidate the role of α-calcitonin gene-related peptide (αCGRP) in this process.

DESIGN

In vivo, αCGRP^+/+ (Wild-type model) mice and αCGRP^-/- (Knock-out model) mice with implants immediately placed in the maxillary first molars extraction sockets were treated with LIPUS. We detected details of peri-implant bone tissues by micro-CT, real-time PCR and histological analysis. In vitro, αCGRP^+/+ and αCGRP^-/- dorsal root ganglia (DRG) neurons were cultured and exposed to LIPUS. Then conditioned media from these neurons were collected and added to osteoblasts to analyze cell differentiation, mineralization and proliferation by real-time PCR, alkaline phosphatase (ALP) and cell counting kit-8 (CCK-8) assay. Besides, ELISA was performed to determine the effect of LIPUS on the αCGRP secretion in neurons.

RESULTS

In vivo tests revealed that αCGRP^-/- mice displayed worse osseointegration when compared to αCGRP^+/+ mice. LIPUS could enhance implant osseointegration in αCGRP+/+ mice but had little effect on αCGRP^-/- mice. Meanwhile, αCGRP was elevated during the osseointegration with LIPUS treatment. In vitro, LIPUS promoted αCGRP secretion in DRG neurons, thereby enhanced osteogenic differentiation and mineralization of osteoblasts. Also we proved that the effects of LIPUS was duty cycle-related and LIPUS of 80% duty cycle had the strongest impacts.

CONCLUSIONS

Our findings demonstrated that LIPUS could enhance osseointegration of dental implant by inducing local neuronal production of αCGRP, providing a new idea to promote peri-implant osseointegration and bone regeneration.

Growth differentiation factor 11 impairs titanium implant healing in the femur and leads to mandibular bone loss

BACKGROUND

Growth differentiation factor 11 (GDF11), a secreted member of the transforming growth factor-β superfamily, has recently been suggested as an anti-aging factor that declines with age in the bloodstream, and restoration of the youthful level by administration of its recombinant protein could reverse age-related dysfunctions. However, its effects on titanium implant osseointegration and mandibular bone during aging remain unknown.

METHODS

Two-month-old and 18-month-old C57BL male mice were given daily intraperitoneal injections of recombinant GDF11 (rGDF11) or vehicle for 6 weeks. Experimental titanium implants were inserted into femurs on the fourth week. Inhibition of GDF11 function was achieved by GDF11 antibody. Implant-bearing femurs were subjected to histomorphometric analysis and biomechanical evaluation. Mandibles were scanned with micro-CT and decalcified for histological measurements.

RESULTS

In both young adult and aged mice, supraphysiologic GDF11 leads to a significantly decreased bone-to-implant contact ratio (BIC) and peri-implant bone volume/total volume (BV/TV) at the histologic level and reduced resistance at the biomechanical level, indicating weakened implant fixation. Moreover, rGDF11 administration resulted in less trabecular bone volume and thinner cortical thickness in the mandible, which was further compromised in the old animals. In contrast, inhibition of GDF11 improved peri-implant bone healing in old mice.

CONCLUSIONS

Rather than functioning as a rejuvenating factor, exogenous GDF11 negatively affects not only titanium implant healing but also mandibular bone in both young and old mice. In contrast, neutralization of endogenous GDF11 has positive effects on implant fixation in aged mice.

Human Bone Marrow-Derived Mesenchymal Stromal Cell-Seeded Bone Biomaterial Directs Fast and Superior Mandibular Bone Augmentation in Rats

Atrophic maxillary ridges present a challenge in the field of oral implantology. Autologous bone is still considered the gold standard grafting material, but the increased morbidity and surgical complications represent a major drawback for its use. The aim of this study was to assess the efficacy of an off-the-shelf cell-seeded bone biomaterial for mandibular bone augmentation, compared to its acellular counterpart. We used a rat model to test the osteogenic properties of bone marrow-derived mesenchymal stromal cells (MSCs)-seeded bone microparticles compared to acellular bone microparticles alone. Rats were euthanized at 4 and 8 weeks, and results analyzed using micro-CT imaging, histology (H&E, Masson’s Trichrome), histomorphometry and immunohistology (Tartrate-Resistant Acid Phosphatase-TRAP, Osteocalcin and human specific anti-mitochondria antibodies). Micro-CT analysis demonstrated that the cell-seeded biomaterial achieved significantly more bone volume formation at 4 weeks (22.75 ± 2.25 mm³ vs 12.34 ± 2.91 mm³, p = 0.016) and at 8 weeks (64.95 ± 5.41 mm³ vs 42.73 ± 10.58 mm³, p = 0.029), compared to the acellular bone microparticles. Histology confirmed that the cell-seeded biomaterial was almost completely substituted at 8 weeks, in opposition to the acellular biomaterial group. Immunohistochemical analysis showed a significantly higher number of TRAP and Osteocalcin positive cells at 4 weeks in the cell-seeded group compared to the acellular group, thereby demonstrating a higher rate of bone remodeling in the presence of MSCs. The grafted human cells remained viable and were detected up to at least 8 weeks, as observed using the human specific anti-mitochondria antibody. This off-the-shelf material available in unlimited quantities could therefore represent a significant advance in the field of mandibular bone augmentation by providing a larger volume of new bone formation in a shorter time.

System for application of controlled forces on dental implants in rat maxillae: Influence of the number of load cycles on bone healing

Experimental studies on the effect of micromotion on bone healing around implants are frequently conducted in long bones. In order to more closely reflect the anatomical and clinical environments around dental implants, and eventually be able to experimentally address load‐management issues, we have developed a system that allows initial stabilization, protection from external forces, and controlled axial loading of implants. Screw‐shaped implants were placed on the edentulous ridge in rat maxillae. Three loading regimens were applied to validate the system; case A no loading (unloaded implant) for 14 days, case B no loading in the first 7 days followed by 7 days of a single, daily loading session (60 cycles of an axial force of 1.5 N/cycle), and case C no loading in the first 7 days followed by 7 days of two such daily loading sessions. Finite element modeling of the peri‐implant compressive and tensile strains plus histological and immunohistochemical analyses revealed that in case B any tissue damage resulting from the applied force (and related interfacial strains) did not per se disturb bone healing, however, in case C, the accumulation of damage resulting from the doubling of loading sessions severely disrupted the process. These proof‐of‐principle results validate the applicability of our system for controlled loading, and provide new evidence on the importance of the number of load cycles applied on healing of maxillary bone.

Peri-implant alveolar bone resorption in an innovative peri-implantitis murine model: Effect of implant surface and onset of infection

PURPOSE

To compare the difference in alveolar bone resorption around implants after immediate placement in a bacterial induced experimental periimplantitis murine model. The various conditions that were examined were: Effect of implant surface characteristics and the onset of the induced infection.

MATERIALS AND METHODS

Screw-shaped titanium implants, smooth-surface or sand-blasted large-grit acid-etched (SLA) coated, were inserted immediately after extraction of the first upper left molar, in 90 5-6-week-old BALB/c mice. The mice were infected with Porphyromonas gingivalis and Fusobacterium nucleatum 21 (early infection) or 42 days (delayed infection) after implantation. Six weeks post infection, bone volume around inserted implants was measured using micro-CT, and was compared to alveolar bone level around teeth. Histological analysis was also performed.

RESULTS

The level of bone loss was significantly higher around the implants compared to the teeth, for smooth surface implants the bone loss was higher than of the SLA surface in both control and infected groups with no statistical significance. The survival rate of the implants in immediate infection was 75% compared of the 100% survival of the delayed infection and control mice. There is no significant difference between the early and the delayed infection in alveolar bone loss level around the implants.

CONCLUSIONS

This model can assist in studying the differences in alveolar bone resorption in different implants and their effect on the development of the disease.

3-dimensional visualization of implant-tissue interface with the polyethylene glycol associated solvent system tissue clearing method

OBJECTIVES

Dental implants are major treatment options for restoring teeth loss. Biological processes at the implant-tissue interface are critical for implant osseointegration. Superior mechanical properties of the implant constitute a major challenge for traditional histological techniques. It is imperative to develop new technique to investigate the implant-tissue interface.

MATERIALS AND METHODS

Our laboratory developed the polyethylene glycol (PEG)-associated solvent system (PEGASOS) tissue clearing method. By immersing samples into various chemical substances, bones and teeth could be turned to transparent with intact internal structures and endogenous fluorescence being preserved. We combined the PEGASOS tissue clearing method with transgenic mouse line and other labelling technique to investigate the angiogenesis and osteogenesis processes occurring at the implant-bone interface.

RESULTS

Clearing treatment turned tissue highly transparent and implant could be directly visualized without sectioning. Implant, soft/hard tissues and fluorescent labels were simultaneously imaged in decalcified or non-decalcified mouse mandible samples without disturbing their interfaces. Multi-channel 3-dimensional image stacks at high resolution were acquired and quantified. The processes of angiogenesis and osteogenesis surrounding titanium or stainless steel implants were investigated.

CONCLUSIONS

Both titanium and stainless steel implants support angiogenesis at comparable levels. Successful osseointegration and calcium precipitation occurred only surrounding titanium, but not stainless steel implants. PEGASOS tissue clearing method provides a novel approach for investigating the interface between implants and hard tissue.

HGMB1 and RAGE as Essential Components of Ti Osseointegration Process in Mice

The release of the prototypic DAMP High Mobility Group Box 1 (HMGB1) into extracellular environment and its binding to the Receptor for Advanced Glycation End Products (RAGE) has been described to trigger sterile inflammation and regulate healing outcome. However, their role on host response to Ti-based biomaterials and in the subsequent osseointegration remains unexplored. In this study, HMGB1 and RAGE inhibition in the Ti-mediated osseointegration were investigated in C57Bl/6 mice. C57Bl/6 mice received a Ti-device implantation (Ti-screw in the edentulous alveolar crest and a Ti-disc in the subcutaneous tissue) and were evaluated by microscopic (microCT [bone] and histology [bone and subcutaneous]) and molecular methods (ELISA, PCR array) during 3, 7, 14, and 21 days. Mice were divided into 4 groups: Control (no treatment); GZA (IP injection of Glycyrrhizic Acid for HMGB1 inhibition, 4 mg/Kg/day); RAP (IP injection of RAGE Antagonistic Peptide, 4 mg/Kg/day), and vehicle controls (1.5% DMSO solution for GZA and 0.9% saline solution for RAP); treatments were given at all experimental time points, starting 1 day before surgeries. HMGB1 was detected in the Ti-implantation sites, adsorbed to the screws/discs. In Control and vehicle groups, osseointegration was characterized by a slight inflammatory response at early time points, followed by a gradual bone apposition and matrix maturation at late time points. The inhibition of HMGB1 or RAGE impaired the osseointegration, affecting the dynamics of mineralized and organic bone matrix, and resulting in a foreign body reaction, with persistence of macrophages, necrotic bone, and foreign body giant cells until later time points. While Control samples were characterized by a balance between M1 and M2-type response in bone and subcutaneous sites of implantation, and also MSC markers, the inhibition of HMGB1 or RAGE caused a higher expression M1 markers and pro-inflammatory cytokines, as well chemokines and receptors for macrophage migration until later time points. In conclusion, HMGB1 and RAGE have a marked role in the osseointegration, evidenced by their influence on host inflammatory immune response, which includes macrophages migration and M1/M2 response, MSC markers expression, which collectively modulate bone matrix deposition and osseointegration outcome.

Mechanical and Biological Advantages of a Tri-Oval Implant Design

Of all geometric shapes, a tri-oval one may be the strongest because of its capacity to bear large loads with neither rotation nor deformation. Here, we modified the external shape of a dental implant from circular to tri-oval, aiming to create a combination of high strain and low strain peri-implant environment that would ensure both primary implant stability and rapid osseointegration, respectively. Using in vivo mouse models, we tested the effects of this geometric alteration on implant survival and osseointegration over time. The maxima regions of tri-oval implants provided superior primary stability without increasing insertion torque. The minima regions of tri-oval implants presented low compressive strain and significantly less osteocyte apoptosis, which led to minimal bone resorption compared to the round implants. The rate of new bone accrual was also faster around the tri-oval implants. We further subjected both round and tri-oval implants to occlusal loading immediately after placement. In contrast to the round implants that exhibited a significant dip in stability that eventually led to their failure, the tri-oval implants maintained their stability throughout the osseointegration period. Collectively, these multiscale biomechanical analyses demonstrated the superior in vivo performance of the tri-oval implant design.

CCR2 Contributes to F4/80+ Cells Migration Along Intramembranous Bone Healing in Maxilla, but Its Deficiency Does Not Critically Affect the Healing Outcome

Bone healing depends of a transient inflammatory response, involving selective migration of leukocytes under the control of chemokine system. CCR2 has been regarded as an essential receptor for macrophage recruitment to inflammation and healing sites, but its role in the intramembranous bone healing on craniofacial region remains unknown. Therefore, we investigated the role of CCR2 on F4/80+ cells migration and its consequences to the intramembranous healing outcome. C57BL/6 wild-type (WT) and CCR2KO mice were subjected to upper right incisor extraction, followed by micro-computed tomography, histological, immunological, and molecular analysis along experimental periods. CCR2 was associated with F4/80+ cells influx to the intramembranous bone healing in WT mice, and CCR2+ cells presented a kinetics similar to F4/80+ and CCR5+ cells. By contrast, F4/80+ and CCR5+ cells were significantly reduced in CCR2KO mice. The absence of CCR2 did not cause major microscopic changes in healing parameters, while molecular analysis demonstrated differential genes expression of several molecules between CCR2KO and WT mice. The mRNA expression of TGFB1, RUNX2, and mesenchymal stem cells markers (CXCL12, CD106, OCT4, NANOG, and CD146) was decreased in CCR2KO mice, while IL6, CXCR1, RANKL, and ECM markers (MMP1, 2, 9, and Col1a2) were significantly increased in different periods. Finally, immunofluorescence and FACS revealed that F4/80+ cells are positive for both CCR2 and CCR5, suggesting that CCR5 may account for the remaining migration of the F4/80+ cells in CCR2KO mice. In summary, these results indicate that CCR2+ cells play a primary role in F4/80+ cells migration along healing in intramembranous bones, but its deficiency does not critically impact healing outcome.

Oral implant osseointegration model in C57Bl/6 mice: microtomographic, histological, histomorphometric and molecular characterization

Despite the successful clinical application of titanium (Ti) as a biomaterial, the exact cellular and molecular mechanisms responsible for Ti osseointegration remains unclear, especially because of the limited methodological tools available in this field.

Biophysical regulation of osteotomy healing: An animal study

BACKGROUND

Osteotomies have been performed for centuries yet there remains a remarkable lack of consensus on optimal methods for cutting bone. There is universal agreement, however, that preserving cell viability is critical.

PURPOSE

To identify mechanobiological parameters influencing bone formation after osteotomy site preparation.

MATERIALS AND METHODS

A murine maxillary osteotomy model was used to evaluate healing. Computational modeling characterized stress and strain distributions in the osteotomy, as well as the magnitude and distribution of heat generated by drilling. The impact of osteocyte death and bone composition were assessed using molecular and cellular assays.

RESULTS

The phases of osteotomy healing in mice align closely with results in large animals; in addition, molecular analyses extended our understanding of osteoprogenitor cell proliferation, differentiation, and mineralization. Computational analyses provided insights into temperature changes caused by drilling and the mechanobiological state in the healing osteotomies, while concomitant cellular assays correlate drill speed with osteocyte apoptosis and bone resorption. Even when drilling was controlled, trabeculated, spongy (Type III) bone healed faster than densely lamellar (Type I) bone because of the abundance of Wnt responsive osteoprogenitor cells in the former.

CONCLUSIONS

These data provide a mechanobiological framework for evaluating tools and technologies designed to improve osteotomy site preparation.

Contribution of the PDL to Osteotomy Repair and Implant Osseointegration

Our objective was to clarify the fate of the periodontal ligament (PDL) retained in the socket after tooth extraction, then determine if this tissue contributed to the osseointegration of "immediate" implants placed in these fresh extraction sockets. Mice underwent maxillary first molar extraction, the residual PDL was removed by an osteotomy, and titanium implants were placed. The osteotomy was created in such a way that the palatal surface was devoid of PDL remnants while the buccal, mesial, and distal surfaces retained PDL fibers. At multiple time points after surgery, tissues were analyzed using a battery of molecular, cellular, and histomorphometrical assays. We found that PDL remnants mineralized and directly contributed to new bone formation in the extraction site. Compared with regions of an extraction site where the PDL was removed by osteotomy, regions that retained PDL fibers had produced significantly more new bone. Around immediate implants, the retained PDL remnants directly contributed to new bone formation and osseointegration. Thus, we conclude that PDL remnants are inherently osteogenic, and if the tissue is healthy, it is reasonable to conclude that curetting out an extraction socket prior to immediate implant placement should be avoided. This recommendation aligns with contemporary trends toward minimally invasive surgical manipulations of the extraction socket prior to immediate implant placement.

Effects of Condensation on Peri-implant Bone Density and Remodeling

Bone condensation is thought to densify interfacial bone and thus improve implant primary stability, but scant data substantiate either claim. We developed a murine oral implant model to test these hypotheses. Osteotomies were created in healed maxillary extraction sites 1) by drilling or 2) by drilling followed by stepwise condensation with tapered osteotomes. Condensation increased interfacial bone density, as measured by a significant change in bone volume/total volume and trabecular spacing, but it simultaneously damaged the bone. On postimplant day 1, the condensed bone interface exhibited microfractures and osteoclast activity. Finite element modeling, mechanical testing, and immunohistochemical analyses at multiple time points throughout the osseointegration period demonstrated that condensation caused very high interfacial strains, marginal bone resorption, and no improvement in implant stability. Collectively, these multiscale analyses demonstrate that condensation does not positively contribute to implant stability.

Rescuing failed oral implants via Wnt activation

AIM

Implant osseointegration is not always guaranteed and once fibrous encapsulation occurs clinicians have few options other than implant removal. Our goal was to test whether a WNT protein therapeutic could rescue such failed implants.

MATERIAL AND METHODS

Titanium implants were placed in over-sized murine oral osteotomies. A lack of primary stability was verified by mechanical testing. Interfacial strains were estimated by finite element modelling and histology coupled with histomorphometry confirmed the lack of peri-implant bone. After fibrous encapsulation was established peri-implant injections of a liposomal formulation of WNT3A protein (L-WNT3A) or liposomal PBS (L-PBS) were then initiated. Quantitative assays were employed to analyse the effects of L-WNT3A treatment.

RESULTS

Implants in gap-type interfaces exhibited high interfacial strains and no primary stability. After verification of implant failure, L-WNT3A or L-PBS injections were initiated. L-WNT3A induced a rapid, significant increase in Wnt responsiveness in the peri-implant environment, cell proliferation and osteogenic protein expression. The amount of peri-implant bone and bone in contact with the implant were significantly higher in L-WNT3A cases.

CONCLUSIONS

These data demonstrate L-WNT3A can induce peri-implant bone formation even in cases where fibrous encapsulation predominates.

Improving oral implant osseointegration in a murine model via Wnt signal amplification

AIM

To determine the key biological events occurring during implant failure and then we use this knowledge to develop new biology-based strategies that improve osseointegration.

MATERIALS AND METHODS

Wild-type and Axin2(LacZ/LacZ) adult male mice underwent oral implant placement, with and without primary stability. Peri-implant tissues were evaluated using histology, alkaline phosphatase (ALP) activity, tartrate resistant acid phosphatase (TRAP) activity and TUNEL staining. In addition, mineralization sites, collagenous matrix organization and the expression of bone markers in the peri-implant tissues were assessed.

RESULTS

Maxillary implants lacking primary stability show histological evidence of persistent fibrous encapsulation and mobility, which recapitulates the clinical problems of implant failure. Despite histological and molecular evidence of fibrous encapsulation, osteoblasts in the gap interface exhibit robust ALP activity. This mineralization activity is counteracted by osteoclast activity that resorbs any new bony matrix and consequently, the fibrous encapsulation remains. Using a genetic mouse model, we show that implants lacking primary stability undergo osseointegration, provided that Wnt signalling is amplified.

CONCLUSIONS

In a mouse model of oral implant failure caused by a lack of primary stability, we find evidence of active mineralization. This mineralization, however, is outpaced by robust bone resorption, which culminates in persistent fibrous encapsulation of the implant. Fibrous encapsulation can be prevented and osseointegration assured if Wnt signalling is elevated at the time of implant placement.