The influence of disuse on bone microstructure and mechanics assessed by HR-pQCT

Effect of early weight bearing program with conventional physiotherapy on functional outcomes in surgically treated proximal tibia fracture: a pilot randomized controlled trial

INTRODUCTION

Patients are often instructed to avoid weight bearing on the proximal tibia for 6 - 12 weeks post-surgery to avoid fracture fixation failure. However, delayed weight bearing leads to delayed mobility, causing difficulties in daily activities; problems such as pain, limited knee ROM, reduced quadriceps muscle strength, and impaired functional outcomes are reported in long-term follow-up. This study primarily aimed to evaluate the feasibility and explore the effect size. The secondary aim was to determine the effectiveness of early weight bearing along with conventional physiotherapy on functional outcomes.

MATERIALS AND METHODS

A single-blinded pilot randomized controlled trial with 30 participants with proximal tibia type I, II, and III fractures were included; they were randomized using computer-based software. Seven patients were lost to follow-up. Group I received early weight bearing along with conventional physiotherapy whereas Group II received restricted weight bearing along with conventional physiotherapy. Assessments were made on post-operative day 3 (POD-03), at discharge, at 6 weeks, and at 12 weeks. Radiographs were recorded immediately after the operation, at discharge, and at 12 weeks.

RESULTS

A full-scale RCT is feasible with an effect size between 0.3 - 0.7. A statistically significant difference (p < 0.05) was found within both groups 12 weeks post-surgery in all outcome measures; the difference was more prominent in the intervention group. A statistically significant difference (p < 0.05) was found between both the groups post-12 weeks in all outcome measures except quadriceps isometric muscle strength.

CONCLUSION

A full-scale RCT for early weight bearing along with conventional physiotherapy for patients operated for Type I, II, and III proximal tibia fracture is feasible. Early weight bearing along with conventional physiotherapy could have a positive effect on reducing patient's pain perception and increasing knee joint mobility, quadriceps isometric muscle strength, knee function, and quality of life without any adverse effects.

TRIAL REGISTRATION

ClinicalTrialsRegistry.gov (CTRI/2022/10/046797).

Walking with unilateral ankle-foot unloading: a comparative biomechanical analysis of three assistive devices

BACKGROUND

Foot and ankle unloading is essential in various clinical contexts, including ulcers, tendon ruptures, and fractures. Choosing the right assistive device is crucial for functionality and recovery. Yet, research on the impact of devices beyond crutches, particularly ankle-foot orthoses (AFOs) designed to unload the ankle and foot, is limited. This study investigates the effects of three types of devices-forearm crutches, knee crutch, and AFO-on biomechanical, metabolic, and subjective parameters during walking with unilateral ankle-foot unloading.

METHODS

Twenty healthy participants walked at a self-selected speed in four conditions: unassisted able-bodied gait, and using three unloading devices, namely forearm crutches, iWalk knee crutch, and ZeroG AFO. Comprehensive measurements, including motion capture, force plates, and metabolic system, were used to assess various spatiotemporal, kinematic, kinetic, and metabolic parameters. Additionally, participants provided subjective feedback through questionnaires. The conditions were compared using a within-subject crossover study design with repeated measures ANOVA.

RESULTS

Significant differences were found between the three devices and able-bodied gait. Among the devices, ZeroG exhibited significantly faster walking speed and lower metabolic cost. For the weight-bearing leg, ZeroG exhibited the shortest stance phase, lowest braking forces, and hip and knee angles most similar to normal gait. However, ankle plantarflexion after push-off using ZeroG was most different from normal gait. IWalk and crutches caused significantly larger center-of-mass mediolateral and vertical fluctuations, respectively. Participants rated the ZeroG as the most stable, but more participants complained it caused excessive pressure and pain. Crutches were rated with the highest perceived exertion and lowest comfort, whereas no significant differences between ZeroG and iWalk were found for these parameters.

CONCLUSIONS

Significant differences among the devices were identified across all measurements, aligning with previous studies for crutches and iWalk. ZeroG demonstrated favorable performance in most aspects, highlighting the potential of AFOs in enhancing gait rehabilitation when unloading is necessary. However, poor comfort and atypical sound-side ankle kinematics were evident with ZeroG. These findings can assist clinicians in making educated decisions about prescribing ankle-foot unloading devices and guide the design of improved devices that overcome the limitations of existing solutions.

Am I big boned? Bone length scaled reference data for HRpQCT measures of the radial and tibial diaphysis in White adults

Cross-sectional size of a long bone shaft influences its mechanical properties. We recently used high-resolution peripheral quantitative computed tomography (HRpQCT) to create reference data for size measures of the radial and tibial diaphyses. However, data did not take into account the impact of bone length. Human bone exhibits relatively isometric allometry whereby cross-sectional area increases proportionally with bone length. The consequence is that taller than average individuals will generally have larger z-scores for bone size outcomes when length is not considered. The goal of the current work was to develop a means of determining whether an individual's cross-sectional bone size is suitable for their bone length. HRpQCT scans performed at 30 % of bone length proximal from the distal end of the radius and tibia were acquired from 1034 White females (age = 18.0 to 85.3 y) and 392 White males (age = 18.4 to 83.6 y). Positive relationships were confirmed between bone length and cross-sectional areas and estimated mechanical properties. Scaling factors were calculated and used to scale HRpQCT outcomes to bone length. Centile curves were generated for both raw and bone length scaled HRpQCT data using the LMS approach. Excel-based calculators are provided to facilitate calculation of z-scores for both raw and bone length scaled HRpQCT outcomes. The raw z-scores indicate the magnitude that an individual's HRpQCT outcomes differ relative to expected sex- and age-specific values, with the scaled z-scores also considering bone length. The latter enables it to be determined whether an individual or population of interest has normal sized bones for their length, which may have implications for injury risk. In addition to providing a means of expressing HRpQCT bone size outcomes relative to bone length, the current study also provides centile curves for outcomes previously without reference data, including tissue mineral density and moments of inertia.

Piezo1-mediated M2 macrophage mechanotransduction enhances bone formation through secretion and activation of transforming growth factor-β1

Macrophages are multifunctional immune system cells that are essential for the mechanical stimulation-induced control of metabolism. Piezo1 is a non-selective calcium channel expressed in multifarious tissues to convey mechanical signals. Here, a cellular model of tension was used to study the effect of mechanical stretch on the phenotypic transformation of macrophages and its mechanism. An indirect co-culture system was used to explore the effect of macrophage activation on bone marrow mesenchymal stem cells (BMSCs), and a treadmill running model was used to validate the mechanism in vivo for in vitro studies. p53 was acetylated and deacetylated by macrophages as a result of mechanical strain being detected by Piezo1. This process is able to polarize macrophages towards M2 and secretes transforming growth factor-beta (TGF-β1), which subsequently stimulates BMSCs migration, proliferation and osteogenic differentiation. Knockdown of Piezo1 inhibits the conversion of macrophages to the reparative phenotype, thereby affecting bone remodelling. Blockade of TGF-β I, II receptors and Piezo1 significantly reduced exercise-increased bone mass in mice. In conclusion, we showed that mechanical tension causes calcium influx, p53 deacetylation, macrophage polarization towards M2 and TGF-β1 release through Piezo1. These events support BMSC osteogenesis.

Automated, calibration-free quantification of cortical bone porosity and geometry in postmenopausal osteoporosis from ultrashort echo time MRI and deep learning

BACKGROUND

Assessment of cortical bone porosity and geometry by imaging in vivo can provide useful information about bone quality that is independent of bone mineral density (BMD). Ultrashort echo time (UTE) MRI techniques of measuring cortical bone porosity and geometry have been extensively validated in preclinical studies and have recently been shown to detect impaired bone quality in vivo in patients with osteoporosis. However, these techniques rely on laborious image segmentation, which is clinically impractical. Additionally, UTE MRI porosity techniques typically require long scan times or external calibration samples and elaborate physics processing, which limit their translatability. To this end, the UTE MRI-derived Suppression Ratio has been proposed as a simple-to-calculate, reference-free biomarker of porosity which can be acquired in clinically feasible acquisition times.

PURPOSE

To explore whether a deep learning method can automate cortical bone segmentation and the corresponding analysis of cortical bone imaging biomarkers, and to investigate the Suppression Ratio as a fast, simple, and reference-free biomarker of cortical bone porosity.

METHODS

In this retrospective study, a deep learning 2D U-Net was trained to segment the tibial cortex from 48 individual image sets comprised of 46 slices each, corresponding to 2208 training slices. Network performance was validated through an external test dataset comprised of 28 scans from 3 groups: (1) 10 healthy, young participants, (2) 9 postmenopausal, non-osteoporotic women, and (3) 9 postmenopausal, osteoporotic women. The accuracy of automated porosity and geometry quantifications were assessed with the coefficient of determination and the intraclass correlation coefficient (ICC). Furthermore, automated MRI biomarkers were compared between groups and to dual energy X-ray absorptiometry (DXA)- and peripheral quantitative CT (pQCT)-derived BMD. Additionally, the Suppression Ratio was compared to UTE porosity techniques based on calibration samples.

RESULTS

The deep learning model provided accurate labeling (Dice score 0.93, intersection-over-union 0.88) and similar results to manual segmentation in quantifying cortical porosity (R² ≥ 0.97, ICC ≥ 0.98) and geometry (R² ≥ 0.82, ICC ≥ 0.75) parameters in vivo. Furthermore, the Suppression Ratio was validated compared to established porosity protocols (R² ≥ 0.78). Automated parameters detected age- and osteoporosis-related impairments in cortical bone porosity (P ≤ .002) and geometry (P values ranging from <0.001 to 0.08). Finally, automated porosity markers showed strong, inverse Pearson's correlations with BMD measured by pQCT (|R| ≥ 0.88) and DXA (|R| ≥ 0.76) in postmenopausal women, confirming that lower mineral density corresponds to greater porosity.

CONCLUSION

This study demonstrated feasibility of a simple, automated, and ionizing-radiation-free protocol for quantifying cortical bone porosity and geometry in vivo from UTE MRI and deep learning.

Femur 3D-DXA Assessment in Female Football Players, Swimmers, and Sedentary Controls

Cortical and trabecular volumetric bone mineral density (vBMD), cortical thickness and surface BMD (sBMD, density-to-thickness ratio) were analyzed in the proximal femur of elite female football players and artistic swimmers using three-dimensional dual-energy X-ray absorptiometry (3D-DXA) software and compared to sedentary controls. Football players had significantly higher (p<0.05) vBMD (mg/cm³) in the trabecular (263±44) and cortical femur (886±69) than artistic swimmers (224±43 and 844±89) and sedentary controls (215±51 and 841±85). Football players had also higher (p<0.05) cortical thickness (2.12±0.19 mm) and sBMD (188±22 mg/cm²) compared to artistic swimmers (1.85±0.15 and 156±21) and sedentary controls (1.87±0.16 and 158±23). Artistic swimmers did not show significant differences in any parameter analyzed for 3D-DXA when compared to sedentary controls. The 3D-DXA modeling revealed statistical differences in cortical thickness and vBMD between female athletes engaged in weight-bearing (football) and non-weight bearing (swimming) sports and did not show differences between the non-weight bearing sport and the sedentary controls. 3D-DXA modeling could provide insight into bone remodeling in the sports field, allowing evaluation of femoral trabecular and cortical strength from standard DXA scans.

Bone deconditioning during partial weight-bearing in rodents - A systematic review and meta-analysis

Space agencies are preparing to send humans to the Moon (16% Earth's gravity) and Mars (38% Earth's gravity), however, there is limited evidence regarding the effects of hypogravity on the skeletal system. A novel rodent partial weight-bearing (PWB) model may provide insight into how human bone responds to hypogravity. The aim of this study was to perform a systematic review investigating the effect of PWB on the structure and function of rodent bone. Five online databases were searched with the following inclusion criteria: population (rodents), intervention (PWB for ≥1-week), control (full weight-bearing), outcomes (bone structure/function), and study design (animal intervention). Of the 2,993 studies identified, eight were included. The main findings were that partial weight-bearing exposure for 21-28 days at 20%, 40%, and 70% of full loading causes: (1) loss of bone mineral density, (2) loss of trabecular bone volume, thickness, number, and increased separation, (3) loss of cortical area and thickness, and 4) reduced bone stiffness and strength. These findings predominately relate the tibia/femur of young/mature female mice, however, their deconditioning response appeared similar, but not identical, to male rats. A dose-response trend was frequently observed between the magnitude of deconditioning and PWB level. The deconditioning patterns in PWB resembled those in rodents and humans exposed to microgravity and microgravity analogs. The present findings suggest that countermeasures against bone deconditioning may be required for humans exploring the Lunar and Martian surfaces.

The association between body fat distribution and bone mineral density: evidence from the US population

OBJECTIVE

To investigate the association between different body fat distribution and different sites of BMD in male and female populations.

METHODS

Use the National Health and Nutrition Examination Survey (NHANES) datasets to select participants. The weighted linear regression model investigated the difference in body fat and Bone Mineral Density (BMD) in different gender. Multivariate adjusted smoothing curve-fitting and multiple linear regression models were used to explore whether an association existed between body fat distribution and BMD. Last, a subgroup analysis was performed according to age and gender group.

RESULTS

Overall, 2881 participants were included in this study. Compared to males, female participants had lower BMD (P < 0.05) and higher Gynoid fat mass (P < 0.00001), while there was no difference between Android fat mass (P = 0.91). Android fat mass was positively associated with Total femur BMD (Males, β = 0.044, 95% CI = 0.037, 0.051, P < 0.00001; Females, β = 0.044, 95% CI = 0.039, 0.049, P < 0.00001), Femoral neck BMD (Males, β = 0.034, 95% CI = 0.027, 0.041, P < 0.00001; Females, β = 0.032, 95% CI = 0.027, 0.037, P < 0.00001), and Total spine BMD (Males, β = 0.036, 95% CI = 0.029, 0.044, P < 0.00001; Females, β = 0.025, 95% CI = 0.019, 0.031, P < 0.00001). The Gynoid fat mass, subgroup analysis of age and ethnicity reached similar results.

CONCLUSION

Body fat in different regions was positively associated with BMD in different sites, and this association persisted in subgroup analyses across age and race in different gender.

Incomplete recovery of bone strength and trabecular microarchitecture at the distal tibia 1 year after return from long duration spaceflight

Determining the extent of bone recovery after prolonged spaceflight is important for understanding risks to astronaut long-term skeletal health. We examined bone strength, density, and microarchitecture in seventeen astronauts (14 males; mean 47 years) using high-resolution peripheral quantitative computed tomography (HR-pQCT; 61 μm). We imaged the tibia and radius before spaceflight, at return to Earth, and after 6- and 12-months recovery and assessed biomarkers of bone turnover and exercise. Twelve months after flight, group median tibia bone strength (F.Load), total, cortical, and trabecular bone mineral density (BMD), trabecular bone volume fraction and thickness remained − 0.9% to − 2.1% reduced compared with pre-flight (p ≤ 0.001). Astronauts on longer missions (> 6-months) had poorer bone recovery. For example, F.Load recovered by 12-months post-flight in astronauts on shorter (< 6-months; − 0.4% median deficit) but not longer (− 3.9%) missions. Similar disparities were noted for total, trabecular, and cortical BMD. Altogether, nine of 17 astronauts did not fully recover tibia total BMD after 12-months. Astronauts with incomplete recovery had higher biomarkers of bone turnover compared with astronauts whose bone recovered. Study findings suggest incomplete recovery of bone strength, density, and trabecular microarchitecture at the weight-bearing tibia, commensurate with a decade or more of terrestrial age-related bone loss.

Disuse Osteoporosis: Clinical and Mechanistic Insights

Disuse osteoporosis describes a state of bone loss due to local skeletal unloading or systemic immobilization. This review will discuss advances in the field that have shed light on clinical observations, mechanistic insights and options for the treatment of disuse osteoporosis. Clinical settings of disuse osteoporosis include spinal cord injury, other neurological and neuromuscular disorders, immobilization after fractures and bed rest (real or modeled). Furthermore, spaceflight-induced bone loss represents a well-known adaptive process to microgravity. Clinical studies have outlined that immobilization leads to immediate bone loss in both the trabecular and cortical compartments accompanied by relatively increased bone resorption and decreased bone formation. The fact that the low bone formation state has been linked to high levels of the osteocyte-secreted protein sclerostin is one of the many findings that has brought matrix-embedded, mechanosensitive osteocytes into focus in the search for mechanistic principles. Previous basic research has primarily involved rodent models based on tail suspension, spaceflight and other immobilization methods, which have underlined the importance of osteocytes in the pathogenesis of disuse osteoporosis. Furthermore, molecular-based in vitro and in vivo approaches have revealed that osteocytes sense mechanical loading through mechanosensors that translate extracellular mechanical signals to intracellular biochemical signals and regulate gene expression. Osteocytic mechanosensors include the osteocyte cytoskeleton and dendritic processes within the lacuno-canalicular system (LCS), ion channels (e.g., Piezo1), extracellular matrix, primary cilia, focal adhesions (integrin-based) and hemichannels and gap junctions (connexin-based). Overall, disuse represents one of the major factors contributing to immediate bone loss and osteoporosis, and alterations in osteocytic pathways appear crucial to the bone loss associated with unloading.

Cortical Bone Loss Following Gastric Bypass Surgery Is Not Primarily Endocortical

Roux-en Y gastric bypass (RYGB) surgery is an effective treatment for obesity; however, it may negatively impact skeletal health by increasing fracture risk. This increase may be the result not only of decreased bone mineral density but also of changes in bone microstructure, for example, increased cortical porosity. Increased tibial and radial cortical porosity of patients undergoing RYGB surgery has been observed as early as 6 months postoperatively; however, local microstructural changes and associated biological mechanisms driving this increase remain unclear. To provide insight, we studied the spatial distribution of cortical porosity in 42 women and men (aged 46 ± 12 years) after RYGB surgery. Distal tibias and radii were evaluated with high-resolution peripheral quantitative computed tomography (HR-pQCT) preoperatively and at 12 months postoperatively. Laminar analysis was used to determine cortical pore number and size within the endosteal, midcortical, and periosteal layers of the cortex. Paired t tests were used to compare baseline versus follow-up porosity parameters in each layer. Mixed models were used to compare longitudinal changes in laminar analysis outcomes between layers. We found that the midcortical (0.927 ± 0.607 mm^-2 to 1.069 ± 0.654 mm^-2 , p = 0.004; 0.439 ± 0.293 mm^-2 to 0.509 ± 0.343 mm^-2 , p = 0.03) and periosteal (0.642 ± 0.412 mm^-2 to 0.843 ± 0.452 mm^-2 , p < 0.0001; 0.171 ± 0.101 mm^-2 to 0.230 ± 0.160 mm^-2 , p = 0.003) layers underwent the greatest increases in porosity over the 12-month period at the distal tibia and radius, respectively. The endosteal layer, which had the greatest porosity at baseline, did not undergo significant porosity increase over the same period (1.234 ± 0.402 mm^-2 to 1.259 ± 0.413 mm^-2 , p = 0.49; 0.584 ± 0.290 mm^-2 to 0.620 ± 0.299 mm^-2 , p = 0.35) at the distal tibia and radius, respectively. An alternative baseline-mapping approach for endosteal boundary definition confirmed that cortical bone loss was not primarily endosteal. These findings indicate that increases in cortical porosity happen in regions distant from the endosteal surface, suggesting that the underlying mechanism driving the increase in cortical porosity is not merely endosteal trabecularization. © 2022 American Society for Bone and Mineral Research (ASBMR).

Bone Impairment in a Large Cohort of Chinese Patients With Tumor-Induced Osteomalacia Assessed by HR-pQCT and TBS

Tumor-induced osteomalacia (TIO) is a rare paraneoplastic syndrome caused by excessive production of fibroblast growth factor 23 (FGF23) by a tumor. Previous studies have revealed generalized mineralization defects and low areal bone mineral density (aBMD) in TIO. However, data on the bone microarchitecture in TIO are limited. In this study, we evaluated the microarchitecture in the peripheral (distal radius and tibia) and axial (lumbar spine) skeleton using high-resolution peripheral quantitative computed tomography (HR-pQCT) and trabecular bone score (TBS) and investigated related factors in a large cohort of Chinese patients with TIO. A total of 186 patients with TIO who had undergone dual-energy X-ray absorptiometry (DXA) or HR-pQCT scans were enrolled. Compared with age-, sex-, and body mass index (BMI)-matched healthy controls, TIO patients (n = 113) had lower volumetric BMD, damaged microstructure, and reduced bone strength in the peripheral skeleton, especially at the tibia. The average TBS obtained from 173 patients was 1.15 ± 0.16. The proportion of patients with abnormal TBS (<1.35) was higher than that with low L₁ to L₄ aBMD Z-score (Z ≤ -2) (43.9% versus 89.6%, p < 0.001). Higher intact fibroblast growth factor 23 (iFGF23), intact parathyroid hormone (iPTH), alkaline phosphatase, and β-isomerized C-terminal telopeptide of type I collagen (β-CTx) levels, more severe mobility impairment, and a history of fracture were associated with poorer HR-pQCT parameters but not with lower TBS. However, greater height loss and longer disease duration were correlated with worse HR-pQCT parameters and TBS. Moreover, TBS was correlated with both trabecular and cortical HR-pQCT parameters in TIO. In conclusion, we revealed impaired bone microarchitecture in the axial and peripheral skeleton in a large cohort of Chinese TIO patients. HR-pQCT parameters and TBS showed promising advantages over aBMD for assessing bone impairment in patients with TIO. A longer follow-up period is needed to observe changes in bone microarchitecture after tumor resection. © 2021 American Society for Bone and Mineral Research (ASBMR).

Periosteal CD68+ F4/80+ Macrophages Are Mechanosensitive for Cortical Bone Formation by Secretion and Activation of TGF-β1

Mechanical force regulates bone density, modeling, and homeostasis. Substantial periosteal bone formation is generated by external mechanical stimuli, yet its mechanism is poorly understood. Here, it is shown that myeloid-lineage cells differentiate into subgroups and regulate periosteal bone formation in response to mechanical loading. Mechanical loading on tibiae significantly increases the number of periosteal myeloid-lineage cells and the levels of active transforming growth factor β (TGF-β), resulting in cortical bone formation. Knockout of Tgfb1 in myeloid-lineage cells attenuates mechanical loading-induced periosteal bone formation in mice. Moreover, CD68⁺ F4/80⁺ macrophages, a subtype of myeloid-lineage cells, express and activate TGF-β1 for recruitment of osteoprogenitors. Particularly, mechanical loading induces the differentiation of periosteal CD68⁺ F4/80^- myeloid-lineage cells to the CD68⁺ F4/80⁺ macrophages via signaling of piezo-type mechanosensitive ion channel component 1 (Piezo1) for TGF-β1 secretion. Importantly, CD68⁺ F4/80⁺ macrophages activate TGF-β1 by expression and secretion of thrombospondin-1 (Thbs1). Administration of Thbs1 inhibitor significantly impairs loading-induced TGF-β activation and recruitment of osteoprogenitors in the periosteum. The results suggest that periosteal myeloid-lineage cells respond to mechanical forces and consequently produce and activate TGF-β1 for periosteal bone formation.

A minimally invasive cerclage of the tibia in a modified Goetze technique: operative technique and first clinical results

Introduction

In spiral fractures of the tibia, the stability of an osteosynthesis may be significantly increased by additive cerclages and, according to biomechanical studies, be brought into a state that allows immediate full weight bearing. As early as 1933, Goetze described a minimally invasive technique for classic steel cerclages. This technique was modified, so that it can be used for modern cable cerclages in a soft part saving way.

Method

After closed reduction, an 8 Fr redon drain is first inserted in a minimally invasive manner, strictly along the bone and placed around the tibia via 1 cm incisions on the anterolateral and dorsomedial tibial edges using a curette and a tissue protection sleeve.

Via this drain, a 1.7 mm cable cerclage can be inserted. The fracture is then anatomically reduced while simultaneously tightening the cerclage. Subsequently, a nail or a minimally invasive plate osteosynthesis is executed using the standard technique.

Using the hospital documentation system, data of patients that were treated with additional cerclages for tibial fractures between 01/01/2014 and 06/30/2020 were subjected to a retrospective analysis for postoperative complications (wound-healing problems, infections and neurovascular injury). Inclusion criteria were: operatively treated tibial fractures, at least one minimally invasive additive cerclage, and age of 18 years or older. Exclusion criteria were: periprosthetic or pathological fractures and the primary need of reconstructive plastic surgery. SPSS was used for statistical analysis.

Results

96 tibial shaft spiral fractures were treated with a total of 113 additive cerclages. The foregoing resulted in 10 (10.4%) postoperative wound infections, 7 of which did not involve the cerclage. One lesion of the profundal peroneal nerve was detected, which largely declined after cerclage removal. In 3 cases, local irritation from the cerclage occurred and required removal of material.

Conclusion

In the described technique, cerclages may be inserted additively at the tibia in a minimally invasive manner and with a few complications, thus significantly increasing the stability of an osteosynthesis. How this ultimately affects fracture healing is the subject of an ongoing study.

Longitudinal Evolution of Bone Microarchitecture and Bone Strength in Type 2 Diabetic Postmenopausal Women With and Without History of Fragility Fractures-A 5-Year Follow-Up Study Using High Resolution Peripheral Quantitative Computed Tomography

Introduction

Diabetic bone disease is characterized by an increased fracture risk which may be partly attributed to deficits in cortical bone quality such as higher cortical porosity. However, the temporal evolution of bone microarchitecture, strength, and particularly of cortical porosity in diabetic bone disease is still unknown. Here, we aimed to prospectively characterize the 5-year changes in bone microarchitecture, strength, and cortical porosity in type 2 diabetic (T2D) postmenopausal women with (DMFx) and without history of fragility fractures (DM) and to compare those to nondiabetic fracture free controls (Co) using high resolution peripheral quantitative computed tomography (HR-pQCT).

Methods

Thirty-two women underwent baseline HR-pQCT scanning of the ultradistal tibia and radius and a FU-scan 5 years later. Bone microarchitectural parameters, including cortical porosity, and bone strength estimates via µFEA were calculated for each timepoint and annualized. Linear regression models (adjusted for race and change in BMI) were used to compare the annualized percent changes in microarchitectural parameters between groups.

Results

At baseline at the tibia, DMFx subjects exhibited the highest porosity of the three groups (66.3% greater Ct.Po, 71.9% higher Ct.Po.Volume than DM subjects, p < 0.022). Longitudinally, porosity increased significantly over time in all three groups and at similar annual rates, while DMFx exhibited the greatest annual decreases in bone strength indices (compared to DM 4.7× and 6.7× greater decreases in failure load [F] and stiffness [K], p < 0.025; compared to Co 14.1× and 22.2× greater decreases in F and K, p < 0.020).

Conclusion

Our data suggest that despite different baseline levels in cortical porosity, T2D women with and without fractures experienced long-term porosity increases at a rate similar to non-diabetics. However, the annual loss in bone strength was greatest in T2D women with a history of a fragility fractures. This suggests a potentially non-linear course of cortical porosity development in T2D bone disease: major porosity may develop early in the course of disease, followed by a smaller steady annual increase in porosity which in turn can still have a detrimental effect on bone strength-depending on the amount of early cortical pre-damage.

A new approach for quantifying localized bone loss by measuring void spaces

The application of high resolution peripheral quantitative computed tomography (HR-pQCT) for the study of bone health has provided valuable insight into the role bone microarchitecture has in determining bone strength and fracture risk. However, conventional density and morphological parameters struggle to distinguish whether localized bone loss is present, visible as heterogeneous deterioration in the trabecular network. This is because current HR-pQCT parameters quantify a global average of properties in the cortical or trabecular compartment. This study proposes a new metric we term "void space" that segments volumes of localized deterioration in the trabecular bone network from HR-pQCT scans and quantifies void space as the void space to total volume ratio (VS/TV, %). A simple and fully automated protocol for segmenting and quantifying void space in HR-pQCT scans is presented, along with the assessment of accuracy, precision, and cross-calibration between generations of HR-pQCT systems. Finally, prevalence of void space and the association with standard HR-pQCT parameters is demonstrated using a large population-based cohort (n = 1236). Void space detection was found to be highly reproducible (accuracy >95%, least significant change <1.76% VS/TV) and correlation between scanner generations was strong (R² = 0.87), although the first generation system struggled to identify small voids. Assessment of void space prevalence in the population-based cohort revealed that void spaces were more common in females than males, prevalence increased with age, and void spaces were typically systemic (occurring at both scan sites rather than only one). A comparison of group-wise differences between participants with and without void space demonstrated that individuals with void spaces had significantly worse trabecular properties for both sexes and at both scan sites. Specifically, the median trabecular bone mineral density, bone volume fraction, and trabecular number were below the 25th percentile of the population, while trabecular separation and inhomogeneity were above the 75th percentile of the population in participants with void spaces. Cortical bone characteristics did not differ between participants with and without void spaces. When the void space region was excluded from morphological analysis so that only the remaining "functional bone" was considered, trabecular properties of participants with void spaces were greatly improved, especially for those who were the greatest outliers. Void space is an intuitive morphological parameter that captures localized deterioration in the trabecular bone network, and has the potential to provide valuable insight into the assessment of bone fragility.

Changes in Volumetric Bone Mineral Density Over 12 Months After a Tibial Bone Stress Injury Diagnosis: Implications for Return to Sports and Military Duty

BACKGROUND

Bone stress injuries (BSIs) occur in up to 20% of runners and military personnel. Typically, after a period of unloading and gradual return to weightbearing activities, athletes return to unrestricted sports participation or military duty approximately 4 to 14 weeks after a BSI diagnosis, depending on the injury location and severity. However, the time course of the recovery of the bone's mechanical competence is not well-characterized, and reinjury rates are high.

PURPOSE

To assess the bone microarchitecture and volumetric bone mineral density (vBMD) over 12 months after a tibial BSI diagnosis.

STUDY DESIGN

Case-control study; Level of evidence, 3.

METHODS

We enrolled 30 female athletes from the local community (aged 18-35 years) with a tibial BSI (grade ≥2 of 4 on magnetic resonance imaging) for this prospective observational study. Participants completed a baseline visit within 3 weeks of the diagnosis. At baseline and 6, 12, 24, and 52 weeks after the BSI diagnosis, we collected high-resolution peripheral quantitative computed tomography scans of the ultradistal tibia (4% of tibial length) of the injured and uninjured legs as well as pain and physical activity assessment findings.

RESULTS

From baseline to 12 weeks after the diagnosis, total, trabecular, and cortical vBMD declined by 0.58% to 0.94% (P < .05 for all) in the injured leg. Total and trabecular vBMD also declined by 0.61% and 0.67%, respectively, in the uninjured leg (P < .05 for both). At 24 weeks, mean values for all bone parameters were nearly equivalent to baseline values, and by 52 weeks, several mean values had surpassed baseline values. Of the 30 participants, 10 incurred a subsequent BSI during the course of the study, and 1 of these 10 incurred 2 subsequent BSIs. Participants who suffered an additional BSI were younger and had a later age of menarche, a greater incidence of previous fractures, and lower serum parathyroid hormone levels (P < .05 for all).

CONCLUSION

Bone density declined in both the injured and the uninjured legs and, on average, did not return to baseline for 3 to 6 months after a tibial BSI diagnosis. The observed time to the recovery of baseline vBMD, coupled with the high rate of recurrent BSIs, suggests that improved return-to-sports and military duty guidelines may be in order.

Severe bone microarchitecture deterioration in a family with hereditary neuropathy: evidence of the key role of the mechanostat

In this report, we present three cases of individuals from the same family with a diagnosis of CMT with severe tibia bone microarchitecture deterioration assessed by HR-pQCT. Charcot-Marie-Tooth disease (CMT) or hereditary neuropathy involves both motor and sensory nerves. Falls are often the first manifestation in these patients and represent an important risk factor for fracture. The reduction of mechanical input on bone inhibits bone formation by osteoblasts and accelerates bone resorption by osteoclasts, leading to disuse osteoporosis. We report three cases of individuals from the same family with a diagnosis of CMT with severe tibia bone microarchitecture deterioration assessed by high-resolution peripheral quantitative computed tomography (HR-pQCT). This affectation was exclusive to the tibia; the radius remained undamaged, showing the consequences of the lack of mobility and mechanical stimulation. Physical activity and rehabilitation, in addition to adequate calcium and vitamin D supplementation, may play an essential role in the management of this disease.

Changes in Bone Mineral Density After Weight Loss Due to Metabolic Surgery or Lifestyle Intervention in Obese Patients

PURPOSE

Metabolic surgery and lifestyle intervention are two common methods used to treat obesity, but the effects of weight loss on bone mineral density (BMD) remain controversial. Our aim was to evaluate changes in BMD of the total hip, femoral neck, and lumbar spine after weight loss caused by metabolic surgery or lifestyle intervention.

MATERIALS AND METHODS

We searched PubMed, Web of Science, and the Cochrane Library to identify relevant studies published before 5 August 2020. The primary outcomes, including the BMD of the total hip, femoral neck, and lumbar spine before and 12 months after metabolic surgery or lifestyle intervention, were extracted.

RESULTS

A total of 19 studies with 1095 participants with obesity were included. Among them, 603 participants with obesity accepted metabolic surgery, while 492 accepted lifestyle intervention. At 12 months after weight loss, the BMD of the total hip decreased significantly in obese patients (mean difference [MD] = 0.06 g/cm²; 95% confidence interval [CI] 0.03 to 0.08; I² = 67%; P < 0.001), while the BMD of the lumbar spine did not significantly change (P > 0.05). In the subgroup analysis, the BMD of the femoral neck decreased significantly at 12 months in obese patients who underwent metabolic surgery (MD = 0.08 g/cm²; 95% CI 0.04 to 0.13; I² = 84%; P < 0.001), while it did not significantly change in obese patients who underwent lifestyle treatment (P > 0.05).

CONCLUSION

Regardless of whether the patients underwent metabolic surgery or lifestyle treatment, the BMD of the total hip significantly decreased in obese patients after weight loss. Different methods used to lose weight may have different effects on the BMD of the femoral neck. Prospective studies, preferably randomized controlled trials (RCTs), are still required to investigate whether the effects of the two treatments on bone metabolism are truly different.

Spectrum of microarchitectural bone disease in inborn errors of metabolism: a cross-sectional, observational study

BACKGROUND

Patients diagnosed with inborn errors of metabolism (IBEM) often present with compromised bone health leading to low bone density, bone pain, fractures, and short stature. Dual-energy X-ray absorptiometry (DXA) is the current gold standard for clinical assessment of bone in the general population and has been adopted for monitoring bone density in IBEM patients. However, IBEM patients are at greater risk for scoliosis, short stature and often have orthopedic hardware at standard DXA scan sites, limiting its use in these patients. Furthermore, DXA is limited to measuring areal bone mineral density (BMD), and does not provide information on microarchitecture.

METHODS

In this study, microarchitecture was investigated in IBEM patients (n = 101) using a new three-dimensional imaging technology high-resolution peripheral quantitative computed tomography (HR-pQCT) which scans at the distal radius and distal tibia. Volumetric BMD and bone microarchitecture were computed and compared amongst the different IBEMs. For IBEM patients over 16 years-old (n = 67), HR-pQCT reference data was available and Z-scores were calculated.

RESULTS

Cortical bone density was significantly lower in IBEMs associated with decreased bone mass when compared to lysosomal storage disorders (LSD) with no primary skeletal pathology at both the radius and tibia. Cortical thickness was also significantly lower in these disorders when compared to LSD with no primary skeletal pathology at the radius. Cortical porosity was significantly greater in hypophosphatasia when compared to all other IBEM subtypes.

CONCLUSION

We demonstrated compromised bone microarchitecture in IBEMs where there is primary involvement of the skeleton, as well as IBEMs where skeletal complications are a secondary outcome. In conclusion, our findings suggest HR-pQCT may serve as a valuable tool to monitor skeletal disease in the IBEM population, and provides insight to the greatly varying bone phenotype for this cohort that can be used for clinical monitoring and the assessment of response to therapeutic interventions.

Soft tissue variations influence HR-pQCT density measurements in a spatially dependent manner

OBJECTIVE

Significant weight loss following treatments for obesity undermines bone metabolism and increases bone turnover and fracture incidence. High resolution peripheral quantitative computed tomography (HR-pQCT) is widely used in skeletal heath assessment research to provide noninvasive bone parameter measurement (e.g. volumetric bone mineral density (vBMD)) with minimal radiation exposure. However, variation in body composition among study groups or longitudinal variations within individuals undergoing significant weight change will generate artifacts and errors in HR-pQCT data. The purpose of this study is to determine the influence of these artifacts on the measurement of vBMD.

METHODS

We designed a custom-made hydroxyapatite (HA)-polymer phantom surrounded by layers of reusable gel pack and hydrogenated fat to mimic the distal tibia and the surrounding lean and fat tissue. Four different thicknesses of fat were used to mimic the soft tissue of increasingly overweight individuals. We then evaluated how a change in soft tissue thickness influenced image quality and vBMD quantification within total, trabecular, and cortical bone compartments. Based on these data, we applied a data correction to previously acquired clinical data in a cohort of gastric bypass patients.

RESULTS

In the phantom measurements, total, trabecular, and cortical vBMD increased as soft tissue thickness decreased. The impact of soft tissue thickness on vBMD varied by anatomic quadrant. When applying the soft tissue data correction to a set of clinical data, we found that soft tissue reduction following bariatric surgery can lead to a clinically significant underestimation of bone loss in longitudinal data, and that the effect is most severe in the cortical compartment.

CONCLUSION

HR-pQCT-based vBMD measurement accuracy is influenced by soft tissue thickness and is spatially inhomogeneous. Our results suggest that variations in soft tissue thickness must be considered in HR-pQCT studies, particularly in studies enrolling cohorts with differing body composition or in studies of longitudinal weight change.

Guidelines for the assessment of bone density and microarchitecture in vivo using high-resolution peripheral quantitative computed tomography

INTRODUCTION

The application of high-resolution peripheral quantitative computed tomography (HR-pQCT) to assess bone microarchitecture has grown rapidly since its introduction in 2005. As the use of HR-pQCT for clinical research continues to grow, there is an urgent need to form a consensus on imaging and analysis methodologies so that studies can be appropriately compared. In addition, with the recent introduction of the second-generation HrpQCT, which differs from the first-generation HR-pQCT in scan region, resolution, and morphological measurement techniques, there is a need for guidelines on appropriate reporting of results and considerations as the field adopts newer systems.

METHODS

A joint working group between the International Osteoporosis Foundation, American Society of Bone and Mineral Research, and European Calcified Tissue Society convened in person and by teleconference over several years to produce the guidelines and recommendations presented in this document.

RESULTS

An overview and discussion is provided for (1) standardized protocol for imaging distal radius and tibia sites using HR-pQCT, with the importance of quality control and operator training discussed; (2) standardized terminology and recommendations on reporting results; (3) factors influencing accuracy and precision error, with considerations for longitudinal and multi-center study designs; and finally (4) comparison between scanner generations and other high-resolution CT systems.

CONCLUSION

This article addresses the need for standardization of HR-pQCT imaging techniques and terminology, provides guidance on interpretation and reporting of results, and discusses unresolved issues in the field.

The Skeletal Consequences of Bariatric Surgery

PURPOSE OF REVIEW

This review outlines the recent findings regarding the impact of bariatric surgery on bone. It explores potential mechanisms for skeletal changes following bariatric surgery and strategies for management.

RECENT FINDINGS

Bone loss following bariatric surgery is multifactorial. Probable mechanisms include skeletal unloading, abnormalities in calciotropic hormones, and changes in gut hormones. Skeletal changes that occur after bariatric surgery are specific to procedure type and persist for several years post-operatively. Studies suggest that while bone loss begins early, fracture risk may be increased later in the post-operative course, particularly after Roux-en-Y gastric bypass (RYGB). Further research is needed to assess the extent to which skeletal changes following bariatric surgery result in fragility. Current management should be geared toward prevention of bone loss, correction of nutritional deficiencies, and incorporation of weight bearing exercise. Pharmacologic treatment should be considered for high-risk patients.

Update on Imaging-Based Measurement of Bone Mineral Density and Quality

PURPOSE OF REVIEW

Patients with inflammatory arthropathies have a high rate of fragility fractures. Diagnostic assessment and monitoring of bone density and quality are therefore critically important. Here, we review standard and advanced techniques to measure bone density and quality, specifically focusing on patients with inflammatory arthropathies.

RECENT FINDINGS

Current standard procedures are dual-energy X-ray absorptiometry (DXA) and quantitative computed tomography (QCT). DXA-based newer methods include trabecular bone score (TBS) and vertebral fracture assessment (VFA). More advanced imaging methods to measure bone quality include high-resolution peripheral quantitative computed tomography (HR-pQCT) as well as multi-detector CT (MD-CT) and magnetic resonance imaging (MRI). Quantitative ultrasound has shown promise but is not standard to assess bone fragility. While there are limitations, DXA remains the standard technique to measure density in patients with rheumatological disorders. Newer modalities to measure bone quality may allow better characterization of bone fragility but currently are not standard of care procedures.

Factors associated with bone microstructural alterations assessed by HR-pQCT in long-term HIV-infected individuals

PURPOSE

In adults with long-term HIV infection, low bone density and increased fracture risk have emerged as significant comorbidities. Our aim was to assess the association of exercise, nutrition, and medications with bone quality in adults with long-term HIV infection.

METHODS

Forty-three adults with HIV infection were enrolled (median BMI 25.7, range 18.2-35.6 kg/m²; median age 57, range 50-69 years). Participants underwent ultradistal radius and tibia high-resolution peripheral quantitative CT (HR-pQCT). Questionnaires included the revised Community Healthy Activities Model Program for Seniors (CHAMPS), the Mini Nutritional Assessment (MNA) as well as medication assessments. Multivariable linear regression models were used to evaluate the association of exercise, nutritional status, tenofovir disoproxil fumarate (TDF) and protease inhibitor (PI) use with bone density and microstructure, adjusting for demographic risk factors.

RESULTS

In regression models, higher nutrition scores were associated with higher tibia cortical thickness (R² = 0.23; β = 0.03; p = 0.044) and higher radius cortical BMD (R² = 0.43; β = 8.4; p = 0.026). Higher weekly frequency of all physical activities was significantly associated with higher radius trabecular BMD (R² = 0.38; β = 0.96; p = 0.050), higher radius trabecular number (R² = 0.31; β = 0.01; p = 0.026), lower tibia and radius trabecular separation (tibia: R² = 0.30; β = -0.003; p = 0.038; radius: R² = 0.35; β = -0.003; p = 0.021), and higher radius bone stiffness (R² = 0.45; β = 0.38; p = 0.047). Higher frequency of bone loading physical activities was significantly associated with higher tibia trabecular density (R² = 0.44; β = 4.06; p = 0.036), higher tibia bone stiffness (R² = 0.46; β = 3.06; p = 0.050), and higher tibia estimated failure load (R² = 0.46; β = 0.17; p = 0.049). TDF used in combination with a PI was associated with lower radius trabecular BMD (R² = 0.39; β = -41.2; p = 0.042), lower radius trabecular number (R² = 0.34; β = -0.44; p = 0.009) and greater radius trabecular separation (R² = 0.42; β = 0.16; p = 0.002), while TDF use without a PI was not associated with reduced bone quality.

CONCLUSIONS

In adults with HIV infection, malnutrition is associated with poor cortical bone quality, while reduced frequency of physical activities and specifically reduced frequency of mechanical loading activities are associated with deficient trabecular bone structure and reduced estimates of bone strength. TDF use in combination with a PI is associated with deleterious effects on trabecular bone structure.

Cortical bone vessel identification and quantification on contrast-enhanced MR images

Background

Cortical bone porosity is a major determinant of bone strength. Despite the biomechanical importance of cortical bone porosity, the biological drivers of cortical porosity are unknown. The content of cortical pore space can indicate pore expansion mechanisms; both of the primary components of pore space, vessels and adipocytes, have been implicated in pore expansion. Dynamic contrast-enhanced MRI (DCE-MRI) is widely used in vessel detection in cardiovascular studies, but has not been applied to visualize vessels within cortical bone. In this study, we have developed a multimodal DCE-MRI and high resolution peripheral QCT (HR-pQCT) acquisition and image processing pipeline to detect vessel-filled cortical bone pores.

Methods

For this in vivo human study, 19 volunteers (10 males and 9 females; mean age =63±5) were recruited. Both distal and ultra-distal regions of the non-dominant tibia were imaged by HR-pQCT (82 µm nominal resolution) for bone structure segmentation and by 3T DCE-MRI (Gadavist; 9 min scan time; temporal resolution =30 sec; voxel size 230×230×500 µm³) for vessel visualization. The DCE-MRI was registered to the HR-pQCT volume and the voxels within the MRI cortical bone region were extracted. Features of the DCE data were calculated and voxels were categorized by a 2-stage hierarchical kmeans clustering algorithm to determine which voxels represent vessels. Vessel volume fraction (volume ratio of vessels to cortical bone), vessel density (average vessel count per cortical bone volume), and average vessel volume (mean volume of vessels) were calculated to quantify the status of vessel-filled pores in cortical bone. To examine spatial resolution and perform validation, a virtual phantom with 5 channel sizes and an applied pseudo enhancement curve was processed through the proposed image processing pipeline. Overlap volume ratio and Dice coefficient was calculated to measure the similarity between the detected vessel map and ground truth.

Results

In the human study, mean vessel volume fraction was 2.2%±1.0%, mean vessel density was 0.68±0.27 vessel/mm³, and mean average vessel volume was 0.032±0.012 mm³/vessel. Signal intensity for detected vessel voxels increased during the scan, while signal for non-vessel voxels within pores did not enhance. In the validation phantom, channels with diameter 250 µm or greater were detected successfully, with volume ratio equal to 1 and Dice coefficient above 0.6. Both statistics decreased dramatically for channel sizes less than 250 µm.

Conclusions

We have a developed a multi-modal image acquisition and processing pipeline that successfully detects vessels within cortical bone pores. The performance of this technique degrades for vessel diameters below the in-plane spatial resolution of the DCE-MRI acquisition. This approach can be applied to investigate the biological systems associated with cortical pore expansion.

Morphological profile of atypical femoral fractures: age-related changes to the cross-sectional geometry of the diaphysis

The use of bisphosphonates for osteoporosis patients has markedly decreased the incidence of femoral neck or trochanteric fractures. However, anti-osteoporosis drugs have been reported to increase the incidence of atypical femoral fractures, which involve stress fractures in the subtrochanteric region or the proximal diaphysis. In this study, the morphological characteristics of the cortical bone in human femoral diaphysis samples were analyzed from individuals who lived before bisphosphonate drugs were available in Japan. A total of 90 right femoral bones were arbitrarily selected (46 males and 44 females) from modern Japanese skeletal specimens. Full-length images of these femurs were acquired using a computed tomography scanner. An image processing method for binarization was used to calculate the threshold values of individual bones for determining their contours. The range between the lower end of the lesser trochanter and the adductor tubercle of each femur was divided at regular intervals to obtain 10 planes. The mean value of cortical bone thickness, periosteal border length, and the cortical cross-sectional area was evaluated for all planes. Moreover, the ratio of the area of the cortical bone to the total area of cross-section at the mid-diaphysis was calculated. A comparison between males and females demonstrated that most females had lower cortical bone area ratios at the mid-diaphysis. The femoral outer shape did not differ markedly according to age or sex; however, substantial individual differences were observed in the shape of the inner surface of the cortical bone. The cortical bone thickness and the cross-sectional area decreased with age in the femoral diaphysis; furthermore, in females, the decrease was higher for the former than for the latter. This may be due to a compensatory increase in the circumference of the femoral diaphysis. In addition, in about half of the subjects there was a discrepancy between the region with maximal value of the cortical bone thickness and that of the total cross-sectional area. Biological responses to mechanical stresses to the femoral diaphysis are thought not to be uniform. Bisphosphonates inhibit bone resorption and may promote non-physiological bone remodeling. Thus, a nonhomogeneous decrease in cortical thickness may be related to the fracture occurrence in the femoral diaphysis in some cases. Thus, long-term administration of bisphosphonates in patients with morphological vulnerability in the femoral cortical bones may increase the occurrence of atypical femoral fractures.

Bone microstructure is significantly altered in CRPS-affected distal tibiae as detected by HR-pQCT: a retrospective cross-sectional study

In the course of complex regional pain syndrome (CRPS), local osteopenia in the subchondral/subcortical areas of the affected limb represents a central manifestation. Mechanistic aspects of CRPS-associated pathologies remain unclear, and knowledge about bone morphology in CRPS-affected areas is rare. The aim of this study was to assess trabecular and cortical bone microstructure in patients with CRPS of the distal tibiae. We retrospectively analysed 14 women diagnosed with unilateral CRPS type I of the lower limb whose affected and unaffected distal tibiae were examined by high-resolution peripheral quantitative computed tomography (HR-pQCT). Laboratory tests included serum levels of calcium, phosphate, 25-hydroxyvitamin D, bone alkaline phosphatase, parathyroid hormone, osteocalcin and urinary levels of deoxypyridinoline (DPD). Bone mineral density was measured by dual-energy X-ray absorptiometry (DXA) at the lumbar spine and both proximal femurs. Average urinary DPD levels, a biochemical marker of bone resorption, were elevated in the examined patient cohort (7.1 ± 1.9 nmol/mmol, reference 3.0-7.0 nmol/mmol). According to HR-pQCT, CRPS-affected distal tibiae showed significantly lower values of cortical BMD and cortical thickness compared to the unaffected contralateral side. Also, bone volume relative to total volume was significantly lower. Trabecular number and trabecular thickness tended to be lower in the affected tibiae. CRPS is associated with significant alterations in bone microstructure of the affected tibiae. Increased bone resorption seems to play a crucial role within a multifactorial process of CRPS-mediated bone atrophy. HR-pQCT could possibly serve as a diagnostic tool in specific CRPS therapy.

Systemic Bone Loss After Fracture

A history of prior fracture is the most reliable indicator of prospective fracture risk. Increased fracture risk is not confined to the region of the prior fracture, but is operant at all skeletal sites, providing strong evidence of systemic bone loss after fracture. Animal and human studies suggest that systemic bone loss begins shortly after fracture and persists for several years in humans. In fact, bone quantity and bone quality may never fully return to their pre-fracture levels, especially in older subjects, demonstrating a need for improved understanding of the mechanisms leading to systemic bone loss after fracture in order to reduce subsequent fracture risk. Although the process remains incompletely understood, mechanical unloading (disuse), systemic inflammation, and hormones that control calcium homeostasis may all contribute to systemic bone loss. Additionally, individual factors can potentially affect the magnitude and time course of systemic bone loss and recovery. The magnitude of systemic bone loss correlates positively with injury severity and age. Men may also experience greater bone loss or less recovery than women after fracture. This review details the current understanding of systemic bone loss following fracture, including possible underlying mechanisms and individual factors that may affect this injury response.

The relationship between estimated bone strength by finite element analysis at the peripheral skeleton to areal BMD and trabecular bone score at lumbar spine

Bone strength, estimated by finite element (FE) analysis based on high resolution peripheral quantitative computed tomography (HR-pQCT) images is an important contributor to understanding risk of fracture. However, it is a peripheral device and cannot be evaluated in vivo at lumbar spine L1-L4. The aim of this study was to investigate if the axial bone quality can be predicted by strength measurements of peripheral bone. Peripheral bone microarchitecture, areal bone mineral density (aBMD) and trabecular bone score (TBS) were measured in adults individuals (n = 262, 60 years and older; 63% women). Stiffness and failure load were estimated by FE analysis at HR-pQCT images at radius and tibia. Areal BMD and TBS were measured by dual energy X-ray absorptiometry (DXA) at L1-L4. Correlations between peripheral and axial data were estimated for each gender adjusted by age, weight, and height. Areal BMD L1-L4 resulted in weak to moderate significant correlations with stiffness and failure load at radius (women: R² = 0.178, p < 0.05 and R² = 0.187, p < 0.001, respectively; men: R² = 0.454 and R² = 0.451, p < 0.001, respectively) and at tibia (women: R² = 0.211 and R² = 0.216, p < 0.001, respectively; men: R² = 0.488 and R² = 0.502, p < 0.001, respectively). TBS showed a very weak or no correlation with stiffness and failure load at radius (women: R² = 0.148 and R² = 0.150, p < 0.05, respectively; men: R² = 0.108 and R² = 0.106, p < 0.05, respectively) and at tibia (women: R² = 0.146 and R² = 0.150, p < 0.05, respectively; men: R² = 0.072 and R² = 0.078, respectively). These data suggest that aBMD L1-L4 was better explained by peripheral bone strength characteristics than the TBS, mainly in men and tibia is generally the site with a better relationship.

Bone mineral density in osteoporotic patients with pyogenic vertebral osteomyelitis: effect of early versus late treatment for osteoporosis

Patients with pyogenic vertebral osteomyelitis (PVO) are at greater risk of bone loss. However, treatment guidelines for bone loss have been lacking. Early bisphosphonate treatment within 6 weeks after PVO diagnosis was significantly associated with superior outcome in femoral BMD at 2-year follow-up, compared to that with late treatment.

INTRODUCTION

Due to absence of concern and proper guidelines, management of bone loss or osteoporosis in PVO is often neglected or delayed. A retrospective cohort study was planned to investigate differences in bone mineral density (BMD) in PVO patients with osteoporosis according to the timing of osteoporosis treatment.

METHODS

The PVO cohort consisted of 192 patients with osteoporosis who visited our institution between January 2003 and March 2015 and received bisphosphonate treatment for osteoporosis. According to the interval between PVO diagnosis and initiation of bisphosphonate, the patients were divided into three groups: group A (within 6 weeks after PVO diagnosis), group B (between 6 weeks and 3 months after diagnosis), and group C (more than 3 months after PVO diagnosis).

RESULTS

The percent increase in total femoral BMD in group A was significantly larger than that in group B at 2-year follow-up (p = 0.036). Similarly, the percent increase in trochanteric (p = 0.008) and total femoral (p = 0009) BMD in group A was significantly larger than that in group C at 2-year follow-up. Even after multivariate adjustment, total femoral BMD changes were significantly associated with the treatment group. Group B (odds ratio = 2.824, p = 0.013) and group C (odds ratio = 3.591, p = 0.001) were more significantly associated with total femoral BMD decreases at 2-year follow-up compared with group A.

CONCLUSIONS

Early bisphosphonate treatment within 6 weeks after PVO diagnosis (group A) was significantly associated with superior outcome in femoral BMD at 2-year follow-up, compared to that with late treatment (groups B and C).

Peripheral Quantitative Computed Tomography: Review of Evidence and Recommendations for Image Acquisition, Analysis, and Reporting, Among Individuals With Neurological Impairment

In 2015, the International Society for Clinical Densitometry (ISCD) position statement regarding peripheral quantitative computed tomography (pQCT) did not recommend routine use of pQCT, in clinical settings until consistency in image acquisition and analysis protocols are reached, normative studies conducted, and treatment thresholds identified. To date, the lack of consensus-derived recommendations regarding pQCT implementation remains a barrier to implementation of pQCT technology. Thus, based on description of available evidence and literature synthesis, this review recommends the most appropriate pQCT acquisition and analysis protocols for clinical care and research purposes, and recommends specific measures for diagnosis of osteoporosis, assigning fracture risk, and monitoring osteoporosis treatment effectiveness, among patients with neurological impairment. A systematic literature search of MEDLINE, EMBASE^©, CINAHL, and PubMed for available pQCT studies assessing bone health was carried out from inception to August 8th, 2017. The search was limited to individuals with neurological impairment (spinal cord injury, stroke, and multiple sclerosis) as these groups have rapid and severe regional declines in bone mass. Of 923 references, we identified 69 that met review inclusion criteria. The majority of studies (n = 60) used the Stratec XCT 2000/3000 pQCT scanners as reflected in our evaluation of acquisition and analysis protocols. Overall congruence with the ISCD Official Positions was poor. Only 11% (n = 6) studies met quality reporting criteria for image acquisition and 32% (n = 19) reported their data analysis in a format suitable for reproduction. Therefore, based on current literature synthesis, ISCD position statement standards and the authors' expertise, we propose acquisition and analysis protocols at the radius, tibia, and femur sites using Stratec XCT 2000/3000 pQCT scanners among patients with neurological impairment for clinical and research purposes in order to drive practice change, develop normative datasets and complete future meta-analysis to inform fracture risk and treatment efficacy evaluation.

High-Impact Mechanical Loading Increases Bone Material Strength in Postmenopausal Women-A 3-Month Intervention Study

Bone adapts to loading in several ways, including redistributing bone mass and altered geometry and microarchitecture. Because of previous methodological limitations, it is not known how the bone material strength is affected by mechanical loading in humans. The aim of this study was to investigate the effect of a 3-month unilateral high-impact exercise program on bone material properties and microarchitecture in healthy postmenopausal women. A total of 20 healthy and inactive postmenopausal women (aged 55.6 ± 2.3 years [mean ± SD]) were included and asked to perform an exercise program of daily one-legged jumps (with incremental number, from 3×10 to 4×20 jumps/d) during 3 months. All participants were asked to register their performed jumps in a structured daily diary. The participants chose one leg as the intervention leg and the other leg was used as control. The operators were blinded to the participant's choice of leg for intervention. The predefined primary outcome was change in bone material strength index (BMSi), measured at the mid tibia with a handheld reference probe indentation instrument (OsteoProbe). Bone microstructure, geometry, and density were measured with high-resolution peripheral quantitative computed tomography (XtremeCT) at the ultradistal and at 14% of the tibia bone length (distal). Differences were analyzed by related samples Wilcoxon signed rank test. The overall compliance to the jumping program was 93.6%. Relative to the control leg, BMSi of the intervention leg increased 7% or 0.89 SD (p = 0.046), but no differences were found for any of the XtremeCT-derived bone parameters. In conclusion, a unilateral high-impact loading program increased BMSi in postmenopausal women rapidly without affecting bone microstructure, geometry, or density, indicating that intense mechanical loading has the ability to rapidly improve bone material properties before changes in bone mass or structure. © 2018 The Authors. Journal of Bone and Mineral Research Published by Wiley Periodicals Inc.

Effects of Gastric Bypass Surgery on Bone Mass and Microarchitecture Occur Early and Particularly Impact Postmenopausal Women

Roux-en-Y gastric bypass (RYGB) surgery is a highly effective treatment for obesity but negatively affects the skeleton. Studies of skeletal effects have generally examined areal bone mineral density (BMD) by dual-energy X-ray absorptiometry (DXA), but DXA may be inaccurate in the setting of marked weight loss. Further, as a result of modestly sized samples of mostly premenopausal women and very few men, effects of RYGB by sex and menopausal status are unknown. We prospectively studied the effects of RYGB on skeletal health, including axial and appendicular volumetric BMD and appendicular bone microarchitecture and estimated strength. Obese adults (N = 48; 27 premenopausal and 11 postmenopausal women, 10 men) with mean ± SD body mass index (BMI) 44 ± 7 kg/m² were assessed before and 6 and 12 months after RYGB. Participants underwent spine and hip DXA, spine QCT, radius and tibia HR-pQCT, and laboratory evaluation. Mean 12-month weight loss was 37 kg (30% of preoperative weight). Overall median 12-month increase in serum collagen type I C-telopeptide (CTx) was 278% (p < 0.0001), with greater increases in postmenopausal than premenopausal women (p = 0.049). Femoral neck BMD by DXA decreased by mean 5.0% and 8.0% over 6 and 12 months (p < 0.0001). Spinal BMD by QCT decreased by mean 6.6% and 8.1% (p < 0.0001); declines were larger among postmenopausal than premenopausal women (11.6% versus 6.0% at 12 months, p = 0.02). Radial and tibial BMD and estimated strength by HR-pQCT declined. At the tibia, detrimental changes in trabecular microarchitecture were apparent at 6 and 12 months. Cortical porosity increased at the radius and tibia, with more dramatic 12-month increases among postmenopausal than premenopausal women or men at the tibia (51.4% versus 18.3% versus 3.0%, p < 0.01 between groups). In conclusion, detrimental effects of RYGB on axial and appendicular bone mass and microarchitecture are detectable as early as 6 months postoperatively. Postmenopausal women are at highest risk for skeletal consequences and may warrant targeted screening or interventions. © 2017 American Society for Bone and Mineral Research.

Bone Health After Bariatric Surgery

Bariatric surgery results in long-term weight loss and improvement or resolution in obesity-related comorbidities. However, mounting evidence indicates that it adversely affects bone health. This review summarizes clinical research findings about the impact of bariatric surgery on skeletal outcomes. The literature is the largest and strongest for the Roux-en-Y gastric bypass (RYGB) procedure, as RYGB was the most commonly performed bariatric procedure worldwide until it was very recently overtaken by the sleeve gastrectomy (SG). Because SG is a newer procedure, its skeletal effects have not yet been well defined. Epidemiologic studies have now demonstrated an increased risk of fracture after RYGB and biliopancreatic diversion with duodenal switch, both of which include a malabsorptive component. As these epidemiologic data have emerged, patient-oriented studies have elucidated the bone tissue-level changes that may account for the heightened skeletal fragility. Bariatric surgery induces early and dramatic increases in biochemical markers of bone turnover. A notable feature of recent patient-oriented clinical studies is the application of advanced skeletal imaging modalities; studies address the limitations of dual-energy X-ray absorptiometry (DXA) by using quantitative computed tomography (QCT)-based modalities to examine volumetric bone mineral density and compartment-specific density and microstructure. RYGB results in pronounced declines in bone mass at the axial skeleton demonstrated by DXA and QCT, as well as at the appendicular skeleton demonstrated by high-resolution peripheral quantitative computed tomography (HR-pQCT). RYGB has detrimental effects on trabecular and cortical microarchitecture and estimated bone strength. Skeletal changes after RYGB appear early and continue even after weight loss plateaus and weight stabilizes. The skeletal effects of bariatric surgery are presumably multifactorial, and mechanisms may involve nutritional factors, mechanical unloading, hormonal factors, and changes in body composition and bone marrow fat. Clinical guidelines address bone health and may mitigate the negative skeletal effects of surgery, although more research is needed to direct and support such guidelines. © 2018 The Authors. JBMR Plus is published by Wiley Periodicals, Inc. on behalf of American Society for Bone and Mineral Research.

Delay in weight bearing in surgically treated tibial shaft fractures is associated with impaired healing: a cohort analysis of 166 tibial fractures

Background

The relation between timing of weight bearing after a fracture and the healing outcome is yet to be established, thereby limiting the implementation of a possibly beneficial effect for our patients. The current study was undertaken to determine the effect of timing of weight bearing after a surgically treated tibial shaft fracture.

Materials and methods

Surgically treated diaphyseal tibial fractures were retrospectively studied between 2007 and 2015. The timing of initial weight bearing (IWB) was analysed as a predictor for impaired healing in a multivariate regression.

Results

Totally, 166 diaphyseal tibial fractures were included, 86 cases with impaired healing and 80 with normal healing. The mean age was 38.7 years (range 16–89). The mean time until IWB was significantly shorter in the normal fracture healing group (2.6 vs 7.4 weeks, p < 0.001). Correlation analysis yielded four possible confounders: infection requiring surgical intervention, fracture type, fasciotomy and open fractures. Logistic regression identified IWB as an independent predictor for impaired healing with an odds ratio of 1.13 per week delay (95% CI 1.03–1.25).

Conclusions

Delay in initial weight bearing is independently associated with impaired fracture healing in surgically treated tibial shaft fractures. Unlike other factors such as fracture type or soft tissue condition, early resumption of weight bearing can be influenced by the treating physician and this factor therefore has a direct clinical relevance. This study indicates that early resumption of weight bearing should be the treatment goal in fracture fixation.

Level of evidence

3b.

Mechanically induced Ca2+ oscillations in osteocytes release extracellular vesicles and enhance bone formation

The vast osteocytic network is believed to orchestrate bone metabolic activity in response to mechanical stimuli through production of sclerostin, RANKL, and osteoprotegerin (OPG). However, the mechanisms of osteocyte mechanotransduction remain poorly understood. We've previously shown that osteocyte mechanosensitivity is encoded through unique intracellular calcium (Ca2+) dynamics. Here, by simultaneously monitoring Ca2+ and actin dynamics in single cells exposed to fluid shear flow, we detected actin network contractions immediately upon onset of flow-induced Ca2+ transients, which were facilitated by smooth muscle myosin and further confirmed in native osteocytes ex vivo. Actomyosin contractions have been linked to the secretion of extracellular vesicles (EVs), and our studies demonstrate that mechanical stimulation upregulates EV production in osteocytes through immunostaining for the secretory vesicle marker Lysosomal-associated membrane protein 1 (LAMP1) and quantifying EV release in conditioned medium, both of which are blunted when Ca2+ signaling was inhibited by neomycin. Axial tibia compression was used to induce anabolic bone formation responses in mice, revealing upregulated LAMP1 and expected downregulation of sclerostin in vivo. This load-related increase in LAMP1 expression was inhibited in neomycin-injected mice compared to vehicle. Micro-computed tomography revealed significant load-related increases in both trabecular bone volume fraction and cortical thickness after two weeks of loading, which were blunted by neomycin treatment. In summary, we found mechanical stimulation of osteocytes activates Ca2+-dependent contractions and enhances the production and release of EVs containing bone regulatory proteins. Further, blocking Ca2+ signaling significantly attenuates adaptation to mechanical loading in vivo, suggesting a critical role for Ca2+-mediated signaling in bone adaptation.

A mathematical multiscale model of bone remodeling, accounting for pore space-specific mechanosensation

While bone tissue is a hierarchically organized material, mathematical formulations of bone remodeling are often defined on the level of a millimeter-sized representative volume element (RVE), "smeared" over all types of bone microstructures seen at lower observation scales. Thus, there is no explicit consideration of the fact that the biological cells and biochemical factors driving bone remodeling are actually located in differently sized pore spaces: active osteoblasts and osteoclasts can be found in the vascular pores, whereas the lacunar pores host osteocytes - bone cells originating from former osteoblasts which were then "buried" in newly deposited extracellular bone matrix. We here propose a mathematical description which considers size and shape of the pore spaces where the biological and biochemical events take place. In particular, a previously published systems biology formulation, accounting for biochemical regulatory mechanisms such as the rank-rankl-opg pathway, is cast into a multiscale framework coupled to a poromicromechanical model. The latter gives access to the vascular and lacunar pore pressures arising from macroscopic loading. Extensive experimental data on the biological consequences of this loading strongly suggest that the aforementioned pore pressures, together with the loading frequency, are essential drivers of bone remodeling. The novel approach presented here allows for satisfactory simulation of the evolution of bone tissue under various loading conditions, and for different species; including scenarios such as mechanical dis- and overuse of murine and human bone, or in osteocyte-free bone.

Model of hindlimb unloading in adult female rats: Characterizing bone physicochemical, microstructural, and biomechanical properties

Prolonged bedrest and microgravity induce alterations to bone, leading to bone fragility and compromising the quality of life. In this study, we characterized the physicochemical changes, microstructure, and biomechanics of the femurs of female adult rats in response to hindlimb unloading for 21 days. Twenty 6-month-old Wistar female rats were distributed into control (CON) and hindlimb unloading (HLU) groups. Analysis the in vivo bone mineral density (BMD) by dual energy x-ray absorptiometry (DXA) from the femurs was performed at the beginning and end of the experiment; plasma levels of calcium, phosphorus, and alkaline phosphatase, tartrate-resistant acid phosphatase activity, assessed by spectrophotometry, and estradiol, measured by enzyme-linked immunosorbent assay, was performed after the experiment. We evaluated changes in the trabecular and cortical structure of the femur, after disuse, by micro-computed tomography with high resolution, for analysis of cortical porosity, Raman spectroscopy to measure the amount of physicochemical properties, and the biomechanical test to estimate the changes in biomechanical properties. Our results demonstrated that, after 21 days, HLU animals had decreased femoral BMD, deteriorated bone microarchitecture, particularly in the cortical compartment, with changes in the physicochemical properties and porosity, and reduced deformation capacity of the bone and resistance to the bone stresses. Nevertheless, this study showed the critical role of mechanical stimulation in maintaining the structure of the skeleton in female adults and that disuse, even for a few days, leads to microscopic changes in the structure of the bone matrix, which increases the risk of fracture.

Micro-structural bone changes in early rheumatoid arthritis persist over 1-year despite use of disease modifying anti-rheumatic drug therapy

Background

We used High Resolution – peripheral Quantitative CT (HR-pQCT) imaging to examine peri-articular bone quality in early rheumatoid arthritis (RA) and explore whether bone quality improved over 12-months in individuals receiving care consistent with practice guidelines.

Methods

A 1-year longitudinal cohort study (Baseline and 12-months) evaluating individuals with early RA compared to age/sex-matched peers. Personal demographic and health and lifestyle information were collected for all. Whereas, active joint count (AJC₂₈), functional limitation, and RA medications were also collected for RA participants. HR-pQCT imaging analyses quantified bone density and microstructure in the Metacarpal Head (MH) and Ultra-Ultra-Distal (UUD) radius at baseline and 12-months. Analyses included a General Linear Modelling repeated measures analyses examined main effects for disease, time, and interaction on bone quality.

Results

Participants (n = 60, 30 RA/30 NRA); 80% female, mean age 53 (varying from 21 to 74 years). At baseline, RA participants were on average 7.7 months since diagnosis, presenting with few active joints (AJC₂₈: 30% none, remaining 70% Median 4 active joints) and minimal self-reported functional limitation (mHAQ-DI_0–3: 0.56). At baseline, 29 of 30 RA participants had received one or more non-biologic disease-modifying anti-rheumatic drugs (DMARD);13 in combination with glucocorticoid and 1 in combination with a biologic medication. One participant only received glucocorticoid medication. Four RA participants withdrew leaving 26 pairs (n = 52) at 12-months; 23 pairs (n = 46) with UUD and 22 pairs (n = 44) with MH baseline and 12-month images to compare. Notable RA/NRA differences (p < 0.05) in bone quality at all three sites included lower trabecular bone density and volume, more rod-like trabeculae, and larger and more variable spaces between trabeculae; fewer trabeculae at the UUD and MH2 sites; and lower cortical bone density and volume in the MH sites. Rate of change over 12-months did not differ between RA/NRA participants which meant there was also no improvement over the year in RA bone quality.

Conclusions

Early changes in peri-articular bone density and microstructure seen in RA are consistent with changes more commonly seen in aging bone and are slow or resistant to recover despite well controlled inflammatory joint symptoms with early DMARD therapy.

Electronic supplementary material

The online version of this article (10.1186/s12891-017-1888-3) contains supplementary material, which is available to authorized users.

Microstructural changes associated with osteoporosis negatively affect loading-induced fluid flow around osteocytes in cortical bone

Loading-induced interstitial fluid flow in the microporosities of bone is critical for osteocyte mechanotransduction and for the maintenance of tissue health, enhancing convective transport in the lacunar-canalicular system. In recent studies, our group has reported alterations of bone's vascular porosity and lacunar-canalicular system microarchitecture in a rat model of postmenopausal osteoporosis. In this work, poroelastic finite element analysis was used to investigate whether these microstructural changes can affect interstitial fluid flow around osteocytes. Animal-specific finite element models were developed combining micro-CT reconstructions of bone microstructure and measures of the poroelastic material properties. These models were used to quantify and compare loading-induced fluid flow in the lacunar-canalicular system of ovariectomized and sham-operated rats. A parametric analysis was also used to quantify the influence of the lacunar-canalicular permeability and vascular porosity on the fluid velocity magnitude. Results show that mechanically-induced interstitial fluid velocity can be significantly reduced in the lacunar-canalicular system of ovariectomized rats. Interestingly, the vascular porosity is shown to have a major influence on interstitial fluid flow, while the lacunar-canalicular permeability influence is limited when larger than 10^-20m². Altogether our results suggest that microstructural changes associated with the osteoporotic condition can negatively affect interstitial fluid flow around osteocytes in the lacunar-canalicular system of cortical bone. This fluid flow reduction could impair mechanosensation of the osteocytic network, possibly playing a role in the initiation and progression of age-related bone loss and postmenopausal osteoporosis.

Hypodynamia Alters Bone Quality and Trabecular Microarchitecture

Disuse induces a rapid bone loss in humans and animals; hypodynamia/sedentarity is now recognized as a risk factor for osteoporosis. Hypodynamia also decreases bone mass but its effects are largely unknown and only few animal models have been described. Hypodynamic chicken is recognized as a suitable model of bone loss but the effects on the quality have not been fully explored. We have used ten chickens bred in a large enclosure (FREE group); ten others were confined in small cages with little space to move around (HYPO group). They were sacrificed at 53 days and femurs were evaluated by microcomputed tomography (microCT) and nanoindentation. Sections (4 µm thick) were analyzed by Fourier Transform InfraRed Microspectroscopy (FTIR) to see the effects on mineralization and collagen and quantitative backscattered electron imaging (qBEI) to image the mineral of the bone matrix. Trabecular bone volume and microarchitecture were significantly altered in the HYPO group. FTIR showed a significant reduction of the mineral-to-matrix ratio in the HYPO group associated with an increase in the carbonate content and an increase in crystallinity (calculated as the area ratio of subbands located at 1020 and 1030 cm^-1) indicating a poor quality of the mineral. Collagen maturity (calculated as the area ratio of subbands located at 1660 and 1690 cm^-1) was significantly reduced in the HYPO group. Reduced biomechanical properties were observed at the tissue level. Confined chicken represents a new model for the study of hypodynamia because bone changes are not created by a surgical lesion or a traumatic method. Animals have a reduced bone mass and present with an altered bone matrix quality which is less mineralized and whose collagen contains less crosslinks than in control chicken.

Advances in imaging approaches to fracture risk evaluation

Fragility fractures are a growing problem worldwide, and current methods for diagnosing osteoporosis do not always identify individuals who require treatment to prevent a fracture and may misidentify those not a risk. Traditionally, fracture risk is assessed using dual-energy X-ray absorptiometry, which provides measurements of areal bone mineral density at sites prone to fracture. Recent advances in imaging show promise in adding new information that could improve the prediction of fracture risk in the clinic. As reviewed herein, advances in quantitative computed tomography (QCT) predict hip and vertebral body strength; high-resolution HR-peripheral QCT (HR-pQCT) and micromagnetic resonance imaging assess the microarchitecture of trabecular bone; quantitative ultrasound measures the modulus or tissue stiffness of cortical bone; and quantitative ultrashort echo-time MRI methods quantify the concentrations of bound water and pore water in cortical bone, which reflect a variety of mechanical properties of bone. Each of these technologies provides unique characteristics of bone and may improve fracture risk diagnoses and reduce prevalence of fractures by helping to guide treatment decisions.

Operator variability in scan positioning is a major component of HR-pQCT precision error and is reduced by standardized training

In this study, we determined that operator positioning precision contributes significant measurement error in high-resolution peripheral quantitative computed tomography (HR-pQCT). Moreover, we developed software to quantify intra- and inter-operator variability and demonstrated that standard positioning training (now available as a web-based application) can significantly reduce inter-operator variability.

INTRODUCTION

HR-pQCT is increasingly used to assess bone quality, fracture risk, and anti-fracture interventions. The contribution of the operator has not been adequately accounted in measurement precision. Operators acquire a 2D projection ("scout view image") and define the region to be scanned by positioning a "reference line" on a standard anatomical landmark. In this study, we (i) evaluated the contribution of positioning variability to in vivo measurement precision, (ii) measured intra- and inter-operator positioning variability, and (iii) tested if custom training software led to superior reproducibility in new operators compared to experienced operators.

METHODS

To evaluate the operator in vivo measurement precision, we compared precision errors calculated in 64 co-registered and non-co-registered scan-rescan images. To quantify operator variability, we developed software that simulates the positioning process of the scanner's software. Eight experienced operators positioned reference lines on scout view images designed to test intra- and inter-operator reproducibility. Finally, we developed modules for training and evaluation of reference line positioning. We enrolled six new operators to participate in a common training, followed by the same reproducibility experiments performed by the experienced group.

RESULTS

In vivo precision errors were up to threefold greater (Tt.BMD and Ct.Th) when variability in scan positioning was included. The inter-operator precision errors were significantly greater than the short-term intra-operator precision (p < 0.001). New trained operators achieved comparable intra-operator reproducibility to experienced operators and lower inter-operator reproducibility (p < 0.001). Precision errors were significantly greater for the radius than for the tibia.

CONCLUSION

Operator reference line positioning contributes significantly to in vivo measurement precision and is significantly greater for multi-operator datasets. Inter-operator variability can be significantly reduced using a systematic training platform, now available online ( http://webapps.radiology.ucsf.edu/refline/ ).

Multiscale and multimodality computed tomography for cortical bone analysis

In clinical studies, high resolution peripheral quantitative computed tomography (HR-pQCT) is used to separately evaluate cortical bone and trabecular bone with an isotropic voxel of 82 µm³, and typical cortical parameters are cortical density (D.comp), thickness (Ct.Th), and porosity (Ct.Po). In vitro, micro-computed tomography (micro-CT) is used to explore the internal cortical bone micro-structure with isotropic voxels and high resolution synchrotron radiation (SR); micro-CT is considered the 'gold standard'. In 16 tibias and 8 femurs, HR-pQCT measurements were compared to conventional micro-CT measurements. To test modality effects, conventional micro-CT measurements were compared to SR micro-CT measurements at 7.5 µm³; SR micro-CT measurements were also tested at different voxel sizes for the femurs, specifically, 7.5 µm³ versus 2.8 µm³. D.comp (r  =  -0.88, p  <  10^-3) was the parameter best correlated with porosity (Po.V/TV). The correlation was not affected by the removal of pores under 130 µm. Ct.Th was also significantly highly correlated (r  =  -0.89 p  <  10^-3), while Ct.Po was correlated with its counterpart Po.V/TV (r  =  0.74, p  <  10^-3). From SR micro-CT and conventional micro-CT at 7.5 µm³ in matching areas, Po.V/TV and pore diameter were underestimated in conventional micro-CT with mean  ±  standard deviation (SD) biases of  -2.5  ±  1.9% and  -0.08  ±  0.08 mm, respectively. In contrast, pore number (Po.N) and pore separation (Po.Sp) were overestimated with mean  ±  SD biases of  +0.03  ±  0.04 mm^-1 and  +0.02  ±  0.04 mm, respectively. The results from the tibia and femur were similar when the results of SR micro-CT at 7.5 µm³ and 2.8 µm³ were compared. Po.V/TV, specific surface of pores (Po.S/Po.V), and Po.N were underestimated with mean biases of  -1.7  ±  0.9%, -4.6  ±  4.4 mm^-1, and  -0.26  ±  0.15 mm^-1, respectively. In contrast, pore spacing was overestimated at 7.5 µm³ compared to 2.8 µm³ with mean biases of 0.05  ±  0.03 mm. Cortical bone measurements from HR-pQCT images provided consistent results compared to those obtained using conventional micro-CT at the distal tibia. D.comp was highly correlated to Po.V/TV because it considers both the micro-porosity (Haversian systems) and macro-porosity (resorption lacunae) of cortical bone. The complexity of canal organization, (including shape, connectivity, and surface) are not fully considered in conventional micro-CT in relation to beam hardening and cone beam reconstruction artifacts. With the exception of Po.V/TV measurements, morphological and topological measurements depend on the characteristics of the x-ray beam, and to a lesser extent, on image resolution.

Cortical bone laminar analysis reveals increased midcortical and periosteal porosity in type 2 diabetic postmenopausal women with history of fragility fractures compared to fracture-free diabetics

We investigated the characteristics and spatial distribution of cortical bone pores in postmenopausal women with type 2 diabetes (T2D). High porosity in the midcortical and periosteal layers in T2D subjects with fragility fractures suggests that these cortical zones might be particularly susceptible to T2D-induced toxicity and may reflect cortical microangiopathy.

INTRODUCTION

Elevated cortical porosity is regarded as one of the main contributors to the high skeletal fragility in T2D. However, to date, it remains unclear if diabetic cortical porosity results from vascular cortical changes or from an expansion in bone marrow space. Here, we used a novel cortical laminar analysis technique to investigate the characteristics and spatial radial distribution of cortical pores in a T2D group with prior history of fragility fractures (DMFx, assigned high-risk group) and a fracture-free T2D group (DM, assigned low-risk group) and to compare their results to non-diabetic controls with (Fx) and without fragility fractures (Co).

METHODS

Eighty postmenopausal women (n = 20/group) underwent high-resolution peripheral quantitative computed tomography (HR-pQCT) of the distal tibia and radius. Cortical bone was divided into three layers of equal width including an endosteal, midcortical, and periosteal layer. Within each layer, total pore area (TPA), total pore number (TPN), and average pore area (APA) were calculated. Statistical analysis employed Mann-Whitney tests and ANOVA with post hoc tests.

RESULTS

Compared to the DM group, DMFx subjects exhibited +90 to +365 % elevated global porosity (p = 0.001). Cortical laminar analysis revealed that this increased porosity was for both skeletal sites confined to the midcortical layer, followed by the periosteal layer (midcortical +1327 % TPA, p ≤ 0.001, periosteal +634 % TPA, p = 0.002), and was associated in both layers and skeletal sites with high TPN (+430 % TPN, p < 0.001) and high APA (+71.5 % APA, p < 0.001).

CONCLUSION

High porosity in the midcortical and periosteal layers in the high-risk T2D group suggests that these cortical zones might be particularly susceptible to T2D-induced toxicity and may reflect cortical microangiopathy.

Bilateral Asymmetry of Radius and Tibia Bone Macroarchitecture and Microarchitecture: A High-Resolution Peripheral Quantitative Computed Tomography Study

Studies assessing bone health often select the dominant or nondominant limb to scan, but not both, for efficiency reasons. New scanning technology allows 3-dimensional (3D) visualization of the microarchitecture in bone, but it is not well understood whether there are differences between the dominant and nondominant limbs. Using 3D high-resolution peripheral quantitative computed tomography (HR-pQCT), the aim of this study is to investigate the effect of limb dominance on bone macroarchitecture and microarchitecture. Healthy male and female participants (N=100; 59 female, 41 male), mean age 30.7±12.1 years, were scanned at both radii and tibiae using HR-pQCT. Hand and foot dominance were determined by the participant's self-report. Most participants were right hand dominant (94.0%) and right foot dominant (91.0%). In the pooled cohort, the dominant radius had significantly greater cortical area (2.11%; p=0.002) and failure load (3.00%; p=0.001). At the tibia, the dominant foot had significantly lower bone mineral density (-0.77%; p=0.042), cortical area (-1.05%; p=0.031), and thickness (-1.51%; p=0.017). For females, there were no differences at the radius, but at the tibia, the dominant side had greater cross-sectional area (1.03%; p=0.044). Our data suggest that dominance has a small yet significant effect on macroarchitecture at both the ultradistal radius and tibia but not microarchitecture. This work emphasizes that it is important to be consistent in the selection of either dominant or nondominant limbs for HR-pQCT cohort studies; however, in the case where the opposite limb needs to be scanned, there would be small differences in macroarchitecture and no significant differences in microarchitecture anticipated.

Experimental studies of bone mechanoadaptation: bridging in vitro and in vivo studies with multiscale systems

Despite advancements in technology and science over the last century, the mechanisms underlying Wolff's law-bone structure adaptation in response to physical stimuli-remain poorly understood, limiting the ability to effectively treat and prevent skeletal diseases. A challenge to overcome in the study of the underlying mechanisms of this principle is the multiscale nature of mechanoadaptation. While there exist in silico systems that are capable of studying across these scales, experimental studies are typically limited to interpretation at a single dimension or time point. For instance, studies of single-cell responses to defined physical stimuli offer only a limited prediction of the whole bone response, while overlapping pathways or compensatory mechanisms complicate the ability to isolate critical targets in a whole animal model. Thus, there exists a need to develop experimental systems capable of bridging traditional experimental approaches and informing existing multiscale theoretical models. The purpose of this article is to review the process of mechanoadaptation and inherent challenges in studying its underlying mechanisms, discuss the limitations of traditional experimental systems in capturing the many facets of this process and highlight three multiscale experimental systems which bridge traditional approaches and cover relatively understudied time and length scales in bone adaptation.