Effect of oxidized chitin nanocrystals and curcumin into chitosan films for seafood freshness monitoring

Incorporation of cellulose nanocrystals to improve the physicochemical and bioactive properties of pectin-konjac glucomannan composite films containing clove essential oil

This study aimed to investigate the effectiveness of cellulose nanocrystals (CNC) isolated from cotton in augmenting pectin (PEC)/konjac glucomannan (KGM) composite films containing clove essential oil (CEO) for food packaging application. The effects of CNC dosage on film properties were examined by analyzing the rheology of film-forming solutions and the mechanical, barrier, antimicrobial, and CEO-release properties of the films. Rheological and FTIR analysis revealed the enhanced interactions among the film components after CNC incorporation due to its high aspect ratio and abundant hydroxyl groups, which can also prevent CEO droplet aggregation, contributing to form a compact microstructure as confirmed by SEM and 3D surface topography observations. Consequently, the addition of CNC reinforced the polysaccharide matrix, increasing the tensile strength of the films and improving their barrier properties to water vapor. More importantly, antibacterial, controlled release and kinetic simulation experiments proved that the addition of CNC could further slow down the release rate of CEO, prolonging the antimicrobial properties of the films. PEC/KGM/CEO composite films with 15 wt% CNC was found to have relatively best comprehensive properties, which was also most effective in delaying deterioration of grape quality during the storage of 9 days at 25 °C.

Active coatings based on oxidized chitin nanocrystals and silk fibroins for the control of anthracnose in 'Hass' avocados

Postharvest avocado losses are mainly due to anthracnose disease caused by Colletotrichum gloeosporioides. Chemical fungicides are effective, but their negative effects on health and the environment have led to the search for sustainable alternatives such as biopolymer-based coatings and natural compounds. Therefore, chitin nanocrystals (NCChit) were extracted using a sustainable deep eutectic solvent (DES) and chemically modified into oxidized chitin nanocrystals (O-NCChit) or deacetylated chitin nanocrystals (D-NCChit) to modulate and increase the charge surface density and the dispersibility of the crystals. The modified NCChits were dispersed with silk fibroins (SF), essential oil (EO), melatonin (MT) and/or phenylalanine (Phe) to elaborate active coatings. Antioxidant and antifungal in vitro analyses showed that the O-NCChit/SF-based coating had the best performance. In addition, in vivo tests were carried out through the artificial inoculation of C. gloeosporioides on coated avocados. O-NCChit/SF/MT-based coatings reduced the severity of anthracnose by 45 %, the same effect as the chemical fungicide (Prochloraz®). Moreover, avocado quality parameters during cold storage and the shelf-life period were also evaluated, where nonsignificant differences were observed. Therefore, this study demonstrates the great potential of O-NCChit and SF in combination with active compounds for the control of anthracnose in 'Hass' avocados.

Development of curcumin-containing polyvinyl alcohol/chitosan active/intelligent films for preservation and monitoring of Schizothorax prenanti fillets freshness

Active/intelligent films for the preservation and monitoring of Schizothorax prenanti fillets freshness were prepared by combining curcumin (CUR) with polyvinyl alcohol/chitosan (PVA/CS) matrix. SEM images showed that the CUR with a maximum content of 1.5 % (w/w) was evenly distributed in the composite matrix. The addition of CUR did not affect the chemical structure of PVA/CS matrix, as confirmed by FTIR investigation. When 1.5 % (w/w) CUR was added, the water vapor barrier property, tensile strength and antioxidant activity of the composite film were the best, which were 5.38 ± 0.25 × 10-11 g/m·s·Pa, 62.05 ± 1.68 MPa and 85.50 ± 3.63 %, respectively. Water solubility of PVA/CS/CUR-1.5 % film was reduced by approximately 27 % compared to PVA/CS film. After adding CUR, the antibacterial properties of the composite film increased significantly. Although the addition of CUR reduced the biodegradability of PVA/CS film, the PVA/CS/CUR-1.5 % film degraded >60 % within 5 weeks. By measuring pH, weight loss, total volatile base‑nitrogen (TVB-N), thiobarbituric acid reactive substances (TBARS), and total viable counts (TVC), the preservation effect of the composite films on the fish freshness was evaluated. The fish shelf life treated by PVA/CS/CUR-1.5 % film expanded from 3-6 days to 12-15 days at 4 °C. In addition, when PVA/CS/CUR-1.5 % film was used to monitor the fish freshness, it exhibited clear color fluctuations, from yellow to orange and to red, corresponding to first-grade freshness, second-grade freshness, and rottenness of the fish, respectively. As a result, the films can be successfully used for Schizothorax prenanti fillets preservation and deterioration monitoring.

Regulate structure and properties of κ-carrageenan/konjac glucomannan composite hydrogel by filling effects of Quillaja saponin-stabilized solid lipid nanostructure

κ-Carrageenan/konjac glucomannan (κ-CA/KGM) composite hydrogels often fail to meet industrial requirements due to their low gel strength and poor mechanical properties, while solid lipid nanoparticles are potential materials to address this challenge due to their good biocompatibility. In the study, we propose using Quillaja saponin-stabilized solid lipid nanoparticle (QSLN) as nanofillers to enhance properties of κ-carrageenan/konjac glucan (κ-CA/KGM) composite hydrogels, and with emphasis on the effect of QSLN filling concentration on the structure and properties of composite hydrogels and the possible mechanisms were investigated. The best performance of QSLN-filled composite hydrogels was achieved at the QSLN concentration of 2.4 %. QSLN was uniformly distributed in the hydrogel matrix and formed electrostatic interactions and hydrogen bonding interactions with the matrix at an appropriate filling level, which enhanced the textural and rheological properties of the hydrogel greatly. In addition, the results of low-field NMR experiments showed that the filling of QSLN reduced the water mobility by enhancing the entanglement of polymer chains in the hydrogel matrix, which improved the freeze-thaw stability and regulated the swelling and deswelling behavior of the composite hydrogel. However, with the increasing of QSLN filling concentration, the above improvements were weakened by the depletion of van der Waals interactions due to the large amount of QSLN aggregation and the weakening of electrostatic interaction. In turn, the hydrogel was found to modulate the crystalline behavior of QSLN by X-ray diffraction and differential scanning calorimeter monitoring. Overall, the optimal synergistic effect between structure and properties could be achieved when the QSLN filling concentration was 2.4 %. These results provide a basis for the development of products that require excellent gel properties and structure.

The Development of Highly pH-Sensitive Bacterial Cellulose Nanofibers/Gelatin-Based Intelligent Films Loaded with Anthocyanin/Curcumin for the Fresh-Keeping and Freshness Detection of Fresh Pork

The aim of this study was to develop highly pH-sensitive bacterial cellulose nanofibers/gelatin-based intelligent films, where the intelligent films were loaded with different ratios (10:0, 0:10 2:8, 5:5 and 8:2, w/w) of curcumin:anthocyanin (Cur/ATH), and the characterization of intelligent films was investigated. The results showed that the microstructures of intelligent films were much rougher as the proportion of curcumin increased. FTIR results showed that anthocyanin and curcumin were fixed in gelatin matrix by hydrogen bonds. Moreover, XRD results showed that curcumin had a significant effect on the crystal structure of the films. Interestingly, films loaded with a Cur/ATH ratio of 5:5 had the best mechanical and antioxidant properties and a high pH-sensitivity property. Consequently, the bacterial cellulose nanofibers/gelatin-based intelligent films loaded with a Cur/ATH ratio of 5:5 were used for the packaging of fresh pork, displaying good fresh-keeping and freshness detection effects. Therefore, this study suggested that bacterial cellulose nanofibers/gelatin-based intelligent films have great potential in the fresh-keeping and freshness detection of meat.

Coffee Silverskin Cellulose-Based Composite Film with Natural Pigments for Food Packaging: Physicochemical and Sensory Abilities

To promote a circular economy, the use of agricultural by-products as food packaging material has steadily increased. However, designing food packaging films that meet consumers' preferences and requirements is still a challenge. In this work, cellulose extracted from coffee silverskin (a by-product of coffee roasting) and chitosan were combined with different natural pigments (curcumin, phycocyanin, and lycopene) to generate a variety of composite films with different colors for food packaging. The physicochemical and sensory properties of the films were evaluated. The cellulose/chitosan film showed favorable mechanical properties and water sensitivity. Addition of natural pigments resulted in different film colors, and significantly affected the optical properties and improved the UV-barrier, swelling degree, and water vapor permeability (WVP), but there were also slight decreases in the mechanical properties. The various colored films can influence the perceived features and evoke different emotions from consumers, resulting in films receiving different attraction and liking scores. This work provides a comprehensive evaluation strategy for coffee silverskin cellulose-based composite films with incorporated pigments, and a new perspective on the consideration of the hedonic ratings of consumers regarding bio-based films when designing food packaging.

Facile Fabrication of Anthocyanin-Nanocellulose Hydrogel Indicator Label for Intelligent Evaluation of Minced Pork Freshness

In order to develop a reliable and rapid method for meat freshness detection, nanocellulose (TOCNF) prepared via the TEMPO (2,2,6,6-tetramethylpiperidine oxidation) oxidation method was used as raw material to prepare hydrogels using Zn²⁺ coordination and binding. Physicochemical properties such as water absorption and porosity were analyzed. It was further used to select suitable hydrogels for the preparation of indication labels after anthocyanin adsorption, and it was applied in the freshness detection of fresh minced pork. Five percent TOCNF (w/w) aqueous solution was homogenized by high shear for 4 min, and 20% (w/w) zinc chloride solution was added to it, so that the concentration of zinc ions could reach 0.25 mol/L. After standing for 24 h, the hydrogel was obtained with good water absorption and a porous three-dimensional network structure. The activation energies of volatile base nitrogen (TVBN) and anthocyanin indicating label color changes were 59.231 kJ/mol and 69.453 kJ/mol, respectively. The difference between the two is within 25 kJ/mol, so the prepared indicator label can accurately visualize the shelf life of fresh pork.

Nano-chitin: Preparation strategies and food biopolymer film reinforcement and applications

Current trends in food packaging systems are toward biodegradable polymer materials, especially the food biopolymer films made from polysaccharides and proteins, but they are limited by mechanical strength and barrier properties. Nano-chitin has great economic value as a highly efficient functional and reinforcing material. The combination of nano-chitin and food biopolymers offers good opportunities to prepare biodegradable packaging films with enhanced physicochemical and functional properties. This review aims to give the latest advances in nano-chitin preparation strategies and its uses in food biopolymer film reinforcement and applications. The first part systematically introduces various preparation methods for nano-chitin, including chitin nanofibers (ChNFs) and chitin nanocrystals (ChNCs). The nano-chitin reinforced biodegradable films based on food biopolymers, such as polysaccharides and proteins, are described in the second part. The last part provides an overview of the current applications of nano-chitin reinforced food biopolymer films in the food industry.

Advances in chitin-based nanoparticle use in biodegradable polymers: A review

Chitin-based nanoparticles are polysaccharide materials that can be produced from a waste stream of the seafood industry: crustacean shells. These nanoparticles have received exponentially growing attention, especially in the field of medicine and agriculture owing to their renewable origin, biodegradability, facile modification, and functionality adjustment. Due to their exceptional mechanical strength and high surface area, chitin-based nanoparticles are ideal candidates for reinforcing biodegradable plastics to ultimately replace traditional plastics. This review discusses the preparation methods for chitin-based nanoparticles and their applications. Special focus is on biodegradable plastics for food packaging making use of the features that can be created by the chitin-based nanoparticles.

The physiochemical and photodynamic inactivation properties of corn starch/erythrosine B composite film and its application on pork preservation

This study explored the effect of erythrosine B (EB) as a photosensitizer in corn starch (CS) film and its physicochemical properties and photodynamic bacteriostatic ability against Staphylococcus aureus, Escherichia coli, and Salmonella both in vitro and inoculated on pork under the irradiation of D65 light-emitting diode (LED) (400-800 nm). The study revealed that the physiochemical properties of CS films: moisture content, water solubility, and water vapor transmission were improved with the addition of EB. In addition, the elasticity and the thermal stability of the film were enhanced. The results showed that the CS-EB films stimulated a maximum of 26.36 μg/mL hydrogen peroxide and 74.5 μg/g hydroxyl radical under irradiation. The CS composite films with a 5 % concentration of EB inhibited the bacterial growth by 4.7 Log CFU/mL in vitro after 30 min of illumination, and 2.4 Log CFU/mL on the pork samples under the same experimental condition. Moreover, the antibacterial ability was enhanced with the increase in EB concentration. Overall, the CS-EB composite films can inhibit the growth of bacteria through photodynamic inactivation and has the potential to become a new type of environmentally friendly packaging material.

On-package indicator films based on natural pigments and polysaccharides for monitoring food quality: a review

Deterioration of food quality and freshness is mainly due to microbial growth and enzyme activity. Chilled fresh food, especially meat and seafood, as well as pasteurized products, rapidly lose quality and freshness during packing, distribution and storage. Real-time food quality monitoring using on-package indicator films can help consumers make informed purchasing decisions. Interest in the use of intelligent packaging systems for monitoring safety and food quality has increased in recent years. Polysaccharide-based films can be developed into on-package indicator films due to their excellent film-forming properties and biodegradability. Another important component is the use of colorants with visible color changes at various pH levels. Currently, natural pigments are receiving increased attention because of their safety and environmental friendliness. This review highlights the recent findings regarding the role of natural pigments, the effects of incorporating natural pigments and polysaccharides on properties of indicator film, current application and limitations of on-package indicator films based on polysaccharides in some foods, problems and improvement of physical properties and color conversion of indicator film containing natural pigments, and development of polysaccharide-based pH-responsive films. © 2022 Society of Chemical Industry.

Oxidized Chitin Nanocrystals Greatly Strengthen the Stability of Resveratrol-Loaded Gliadin Nanoparticles

Resveratrol (RES) is a natural polyphenol with a variety of health beneficial properties, but its application is greatly limited due to low aqueous solubility and poor bioavailability. This study aims to address these issues via gliadin nanoparticles stabilized with oxidized chitin nanocrystals (O-ChNCs) as a delivery system for RES. RES-loaded gliadin nanoparticles (GRNPs) were fabricated by an antisolvent method, and their formation mechanism was elucidated using zeta-potential, FTIR, XRD, and TEM. Furthermore, the effect of O-ChNCs on the colloidal stability and bioactiveness of GRNPs was discussed. The results demonstrate that O-ChNCs are adsorbed onto the surface of GRNPs through hydrogen bonding and electrostatic interactions, leading to the enhanced absolute potential and the improved hydrophobicity of the particles, which in turn facilitates the stability of the GRNPs. Furthermore, the changes in the release profile and antioxidant activity of RES in the simulated gastric and intestinal tracts indicate that the adsorption of O-ChNCs not only delays the release of RES but also has a protective effect on the antioxidant capacity of RES. This study provides significant implications for developing stable gliadin nanoparticles as delivery vehicles for bioactive substances.

Nanochitin: Chemistry, Structure, Assembly, and Applications

Chitin, a fascinating biopolymer found in living organisms, fulfills current demands of availability, sustainability, biocompatibility, biodegradability, functionality, and renewability. A feature of chitin is its ability to structure into hierarchical assemblies, spanning the nano- and macroscales, imparting toughness and resistance (chemical, biological, among others) to multicomponent materials as well as adding adaptability, tunability, and versatility. Retaining the inherent structural characteristics of chitin and its colloidal features in dispersed media has been central to its use, considering it as a building block for the construction of emerging materials. Top-down chitin designs have been reported and differentiate from the traditional molecular-level, bottom-up synthesis and assembly for material development. Such topics are the focus of this Review, which also covers the origins and biological characteristics of chitin and their influence on the morphological and physical-chemical properties. We discuss recent achievements in the isolation, deconstruction, and fractionation of chitin nanostructures of varying axial aspects (nanofibrils and nanorods) along with methods for their modification and assembly into functional materials. We highlight the role of nanochitin in its native architecture and as a component of materials subjected to multiscale interactions, leading to highly dynamic and functional structures. We introduce the most recent advances in the applications of nanochitin-derived materials and industrialization efforts, following green manufacturing principles. Finally, we offer a critical perspective about the adoption of nanochitin in the context of advanced, sustainable materials.

Recent Advances in pH-Responsive Freshness Indicators Using Natural Food Colorants to Monitor Food Freshness

Recently, due to the enhancement in consumer awareness of food safety, considerable attention has been paid to intelligent packaging that displays the quality status of food through color changes. Natural food colorants show useful functionalities (antibacterial and antioxidant activities) and obvious color changes due to their structural changes in different acid and alkali environments, which could be applied to detect these acid and alkali environments, especially in the preparation of intelligent packaging. This review introduces the latest research on the progress of pH-responsive freshness indicators based on natural food colorants and biodegradable polymers for monitoring packaged food quality. Additionally, the current methods of detecting food freshness, the preparation methods for pH-responsive freshness indicators, and their applications for detecting the freshness of perishable food are highlighted. Subsequently, this review addresses the challenges and prospects of pH-responsive freshness indicators in food packaging, to assist in promoting their commercial application.

Gelatin/Chitosan Films Incorporated with Curcumin Based on Photodynamic Inactivation Technology for Antibacterial Food Packaging

Photodynamic inactivation (PDI) is a new type of non-thermal sterilization technology that combines visible light with photosensitizers to generate a bioactive effect against foodborne pathogenic bacteria. In the present investigation, gelatin (GEL)/chitosan (CS)-based functional films with PDI potency were prepared by incorporating curcumin (Cur) as a photosensitizer. The properties of GEL/CS/Cur (0.025, 0.05, 0.1, 0.2 mmol/L) films were investigated by evaluating the surface morphology, chemical structure, light transmittance, and mechanical properties, as well as the photochemical and thermal stability. The results showed a strong interaction and good compatibility between the molecules present in the GEL/CS/Cur films. The addition of Cur improved different film characteristics, including thickness, mechanical properties, and solubility. More importantly, when Cur was present at a concentration of 0.1 mM, the curcumin-mediated PDI inactivated >4.5 Log CFU/mL (>99.99%) of Listeria monocytogenes, Escherichia coli, and Shewanella putrefaciens after 70 min (15.96 J/cm2) of irradiation with blue LED (455 ± 5) nm. Moreover, Listeria monocytogenes and Shewanella putrefaciens were completely inactivated after 70 min of light exposure when the Cur concentration was 0.2 mM. In contrast, the highest inactivation effect was observed in Vibrio parahaemolyticus. This study showed that the inclusion of Cur in the biopolymer-based film transport system in combination with photodynamic activation represents a promising option for the preparation of food packaging films.

A review on colorimetric indicators for monitoring product freshness in intelligent food packaging: Indicator dyes, preparation methods, and applications

Intelligent food packaging system exhibits enhanced communication function by providing dynamic product information to various stakeholders (e.g., consumers, retailers, distributors) in the supply chain. One example of intelligent packaging involves the use of colorimetric indicators, which when subjected to external stimuli (e.g., moisture, gas/vapor, electromagnetic radiation, temperature), display discernable color changes that can be correlated with real-time changes in product quality. This type of interactive packaging system allows continuous monitoring of product freshness during transportation, distribution, storage, and marketing phases. This review summarizes the colorimetric indicator technologies for intelligent packaging systems, emphasizing on the types of indicator dyes, preparation methods, applications in different food products, and future considerations. Both food and nonfood indicator materials integrated into various carriers (e.g., paper-based substrates, polymer films, electrospun fibers, and nanoparticles) with material properties optimized for specific applications are discussed, targeting perishable products, such as fresh meat and fishery products. Colorimetric indicators can supplement the traditional "Best Before" date label by providing real-time product quality information to the consumers and retailers, thereby not only ensuring product safety, but also promising in reducing food waste. Successful scale-up of these intelligent packaging technologies to the industrial level must consider issues related to regulatory approval, consumer acceptance, cost-effectiveness, and product compatibility.

Immobilization of phlorotannins on nanochitin: A novel biopreservative for refrigerated sea bass (Lateolabrax japonicus) fillets

A novel biopreservative was developed by immobilizing phlorotannins into nanochitin (NCh). NCh were selected as a host complex to immobilized phlorotannins and the structural properties and antioxidant activity of the NCh-phlorotannins nanocomplex was investigated. The NCh-phlorotannins showed high antioxidant activity, as evidenced by free radical scavenging activity test. Moreover, the effects of NCh-phlorotannins on physical [color, water holding capacity (WHC), and texture], chemical [thiobarbituric acid (TBA) values, total volatile base nitrogen (TVB-N), and pH], microbiological [total viable count], changes of refrigerated sea bass (Lateolabrax japonicus) fillets were also evaluated. Sea bass fillets add with 1.5 g/kg NCh-phlorotannins had lower bacterial growth, pH, TVB-N and TBA as well as better characteristics of texture, color, and WHC than those of the control group during refrigerated storage. The efficiency of NCh-phlorotannins treatment was also better than that of phlorotannins or NCh treatment alone. Therefore, NCh-phlorotannins may be a potential biopreservative to extend the shelf-life of sea bass fillets quality during refrigerated storage.

Chitin Nanocrystals: Environmentally Friendly Materials for the Development of Bioactive Films

Biobased nanomaterials have gained growing interest in recent years for the sustainable development of composite films and coatings, providing new opportunities and high-performance products. In particular, chitin and cellulose nanocrystals offer an attractive combination of properties, including a rod shape, dispersibility, outstanding surface properties, and mechanical and barrier properties, which make these nanomaterials excellent candidates for sustainable reinforcing materials. Until now, most of the research has been focused on cellulose nanomaterials; however, in the last few years, chitin nanocrystals (ChNCs) have gained more interest, especially for biomedical applications. Due to their biological properties, such as high biocompatibility, biodegradability, and antibacterial and antioxidant properties, as well as their superior adhesive properties and promotion of cell proliferation, chitin nanocrystals have emerged as valuable components of composite biomaterials and bioactive materials. This review attempts to provide an overview of the use of chitin nanocrystals for the development of bioactive composite films in biomedical and packaging systems.

Curcumin and its uses in active and smart food packaging applications - a comprehensive review

Active and intelligent food packaging is an innovative technology to prevent food contamination and ensure food quality and safety. Active packaging protects the food from microbial contamination, while smart or intelligent packaging enables monitoring the freshness of the food or quality change in real-time. Curcumin, one of the most well-known natural colorants, has received a lot of attention for its excellent functional properties and ability to change color with changes in pH. Curcumin, the golden component of turmeric, a spice widely used in food since ancient times, is a cost-effective and abundant biomaterial with various biological properties such as antioxidant, antibacterial, antiviral, antitumor, and anti-inflammatory. Recently, active packaging or intelligent packaging systems have been actively developed using the functional properties of curcumin. In this review, we briefly reviewed curcumin's basic biological functions and discussed comprehensive and recent progress in using curcumin in various polymer-based active and smart food packaging applications.

Cellulose laurate films containing curcumin as photoinduced antibacterial agent for meat preservation

Hydrophobic cellulose laurate (CL) with high degree of substitution has been successfully synthesized. The mechanical property, water-resistance, antimicrobial activity, barrier properties and food decontamination of cellulose-laurate-curcumin films (CL-Cu_x, x = 0.1, 0.5, and 1) were investigated. The results showed that the mechanical properties of CL-Cu_x hardly change after soaking in water for 24 h, probably due to the strong hydrophobicity of cellulose laurate. CL-Cu₁ represented a good photoinduced antibacterial effect against S. aureus. After irradiation of white light at 60 mW·cm^-2 for 20 min, the inhibition efficiency reached to 95 ± 2.02%, probably owing to the generated active ¹O₂. In comparison with CL-Cu₁ stored in natural light, the bacteriostatic effect of CL-Cu₁ in dark storage was better, and the inhibition rate of CL-Cu₁ remained 80 ± 1.22 at 60th day. The stabler excited state of curcumin in hydrophobic cellulose laurate was probably assigned to inhibition of tautomerism or conformational transition, which was beneficial to the generation of singlet oxygen. CL-Cu₁ can significantly inhibit the growth of TVBN and TVC values of chilled meat upon white light irradiation, indicating the potential application of cellulose-laurate-curcumin films in food decontamination.

Cellulosic films reinforced by chitosan-citric complex for meat preservation: Influence of nonenzymatic browning

The methods to obtain cellulose-chitosan composite films exhibiting excellent water-resisting and antibacterial abilities have been widely explored. Cellulose-chitosan-citric films (C-Ch_x-F) were successfully obtained by a facile coating of chitosan-citric complex on the surface of cellulose. The occurrence of nonenzymatic browning at 80 °C improved the thermal stability, water-resistance, mechanical property and oxygen-barrier ability of C-Ch_x-F membranes. C-Ch₃-F hydrogel showed excellent breaking stress of 6.03 ± 0.25 MPa, and elastic module of 27.09 ± 1.21 MPa, probably assigned to nonenzymatic browning. Under different test temperatures, the nonenzymatic browning and the content of chitosan-citric complex will significantly improve the oxygen barrier property of membranes (P < 0.05), and C-Ch₃-F membrane represented the value of oxygen permeation below the detection level. Excellent antibacterial capability of C-Ch_x-F hydrogels demonstrated that polycationic chitosan-citric complex immobilized in films still retained excellent antibacterial ability. The excellent decontamination in meat preservation endowed C-Ch_x-F films with potential application in food packaging.

Enhanced functional properties of chitosan films incorporated with curcumin-loaded hollow graphitic carbon nitride nanoparticles for bananas preservation

The exploration of novel functional packaging films is of great scientific and technological interest. Herein, a novel chitosan/hollow g-C₃N₄/curcumin (CS-HCNS-Cur) biocomposite films was successful fabricated with integrated functions of slow release, antimicrobial activity and food freshness preservation. CS-HCNS-Cur films take the advantages of the excellent thermal stability and slow-release ability of HCNS to curcumin. Among the characterizations including scanning electron microscopy, transmission electron microscope, atomic force microscopy, fourier transform infrared spectroscopy, mechanical properties and the rheological properties measurements confirmed the successful fabrication of CS-HCNS-Cur films. The averaged water contact angle and water vapor permeability of this film were 105.83° and 105.03 × 10^-5 g·mm (m²·h·kPa)^-1, respectively. This film showed pH-responsive and slow-release ability. Moreover, this film can effectively store bananas for 10 days. Therefore, CS-HCNS-Cur films have promising potential for applications in functional food packaging.

Construction of carboxymethyl konjac glucomannan/chitosan complex nanogels as potential delivery vehicles for curcumin

Construction of nanoscale delivery systems from natural food biopolymer complexes have attracted increasing interests in the fields of food industries. In this study, novel carboxymethyl konjac glucomannan/ chitosan (CMKGM/CS) nanogels with and without 1-ethyl-3-(3-dimethylaminopropyl) /N-hydroxysuccinimide) (EDC/NHS)-initiated crosslinking were prepared. The physicochemical and structural properties of the CMKGM/CS nanogels and their potential to be a delivery vehicle for curcumin were investigated. Compared to original uncrosslinked nanogels, crosslinking did not alter particle size and morphology but decreased zeta potential of nanogels. Fourier transform infrared spectrum confirmed that the amide linkage was formed between CMKGM and CS, which obviously enhanced the stability of crosslinked nanogels under gastrointestinal conditions. Furthermore, the crosslinked nanogels not only had higher encapsulation efficiency of curcumin but also better sustained release behavior under simulated gastrointestinal conditions. These findings suggested that the crosslinked CMKGM/CS nanogels might be a promising delivery system for nutrients.

Effect of Curcumin Addition on the Properties of Biodegradable Pectin/Chitosan Films

A pectin/chitosan matrix-loaded curcumin film (PCCF) with a deep eutectic solvent (DES) as the solvent and plasticizer was prepared in this study. Different quantities of curcumin (identified as PCCF-0, PCCF-1, PCCF-2. PCCF-3) were loaded on the pectin/chitosan film in order to evaluate their effects on the film properties. Results showed that curcumin could interact with the pectin/chitosan matrix and form a complex three-dimensional network structure. PCCF could promote the thickness, tensile strength, thermal properties, antioxidant and antiseptic capacities, but deteriorate the light transmission and elongation at the same time. The addition of curcumin would change the color of the film, without significantly affecting the moisture content. The tensile strength of PCCF-3 reached the maximum value of 3.75 MPa, while the elongation decreased to 10%. Meanwhile, the water-resistance properties of PCCF-3 were significantly promoted by 8.6% compared with that of PCCF-0. Furthermore, PCCF showed remarkable sustained antioxidant activities in a dose-dependent manner. PCCF-3 could inhibit DPPH and ABTS free radicals by 58.66% and 29.07%, respectively. It also showed antiseptic capacity on fresh pork during storage. Therefore, curcumin addition could improve the barrier, mechanical, antioxidant and antiseptic properties of the polysaccharide-based film and PCCF has the potential to be used as a new kind of food packaging material in the food industry.

Chitin nanocrystals based complex fluids: A green nanotechnology

Chitin biopolymer has received significant attention recently by many industries as a green technology. Nanotechnology has been used to make chitin nanocrystals (ChiNCs) that are rod-shaped natural nanomaterials with nanoscale size. Owing to the unique features such as biodegradability, biocompatibility, renewability, rod-shape, and excellent surface and interfacial, physiochemical, and thermo-mechanical properties; ChiNCs have been green and attractive products with wide applications specifically in medical and pharmaceutical, food and packaging, cosmetic, electrical, and electronic, and also in the oil and gas industry. This review aims to give a comprehensive and applied insight into ChiNCs technology. It starts with reviewing different sources of chitin and their extraction methods followed by the characterization of ChiNCs. Furthermore, a detailed investigation into various complex fluids (dispersions, emulsions, foams, and gels) stabilized by ChiNCs and their characterisation have been thoroughly deliberated. Finally, the current status including ground-breaking applications, untapped investigations, and future prospective have been presented.

Fabrication of halochromic smart films by immobilizing red cabbage anthocyanins into chitosan/oxidized-chitin nanocrystals composites for real-time hairtail and shrimp freshness monitoring

In this study, halochromic smart films were produced, characterized, and applied to monitor the freshness of hairtail and shrimp in real-time. Red cabbage anthocyanins (RCAs) solution illustrated significant color variations (red-pink-blue-green) in different pH environments. RCAs were successfully immobilized into chitosan (CS)/oxidized-chitin nanocrystals (OCN) composites through hydrogen bonding, and cohesive film structures were formed. When the proper concentration of RCAs was incorporated into the composites, improved water vapor permeability (WVP), oxygen permeability (OP), mechanical, UV-blocking, and antioxidant properties were observed. Moreover, the smart films exhibited distinguishable changes of color to ammonia vapor and acidic/alkaline environment within short time intervals, which were easy to discern by naked eyes. Finally, the smart films were applied to monitor the freshness of hairtail (Trichiurus lepturus) and shrimp (Penaeus vannamei). The film color changed significantly during storage time, and three stages of product freshness (fresh, medium fresh, and spoiled) were successfully differentiated. Strong correlations among three freshness indicators and two colorimetric parameters were also identified and analyzed. Overall, the smart system assembled from non-toxic and biodegradable components could contribute to monitoring the freshness of seafood, like hairtail and shrimp, in real-time.

Chitosan-riboflavin composite film based on photodynamic inactivation technology for antibacterial food packaging

Photodynamic inactivation (PDI) is a novel sterilization technology that has proven effective in medicine. This study focused on applying PDI to food packaging, where chitosan (CS) films containing photosensitizing riboflavin (RB) were prepared via solution casting. The CS-RB composite films exhibited good ultraviolet (UV)-barrier properties, and had a visually appealing highly transparent yellow appearance. Scanning electron microscopy (SEM) confirmed even dispersion of RB throughout the CS film. The addition of RB led to improved film characteristics, including the thickness, mechanical properties, solubility, and water barrier properties. The CS-RB⁵ composite films produced sufficient singlet oxygen under blue LED irradiation for 2 h to inactivate two food-borne pathogens (Listeria monocytogenes and Vibrio parahaemolyticus) and one spoilage bacteria (Shewanella baltica). The CS-RB composite films were assessed as a salmon packaging material, where inhibition of bacterial growth was observed. The film is biodegradable, and has the potential to alleviate the issues associated with the excessive use of petrochemical materials, such as environmental pollution and limited resources. The CS-RB composite films showed potential as a novel environmentally friendly packaging material for shelf-life extension of refrigerated food products.

Monitoring freshness of chicken breast by using natural halochromic curcumin loaded chitosan/PEO nanofibers as an intelligent package

Intelligent packaging is important to get information about real time quality of foods. The objective of this study was to develop an electrospun nanofiber halochromic pH sensor film using curcumin, chitosan (CS) and polyethylene oxide (PEO) to monitor chicken freshness. Conductivity and rheological behavior of CS/PEO/curcumin solutions were measured to understand the effect of solution properties on the morphology of the fibers. The morphological characteristics of nanofiber films were investigated by Field Emission Scanning Electron Microscopy (FESEM). Average diameter of the fibers was found to be between 283 ± 27 nm and 338 ± 35 nm. It was concluded that increasing CS amount in nanofibers decreased the diameter of the fibers. Thermal analysis and water vapor permeability features of the pH sensor were also examined. Color changes of curcumin loaded CS/PEO nanofiber film was evaluated on chicken breast package at 4 °C. The color of nanofiber film changed from bright yellow to reddish color which provided an opportunity to detect color changes by even the naked eyes of the untrained consumer. As a quality indicator, surface pH changes of the chicken breast and TVB-N (total volatile basic nitrogen) were measured. At the end of the day 5, pH value of 6.53 ±0.08 and TVB-N concentration of 23.45 ±3.35 mg/100 g indicated that food was at the edge of the acceptance level. As a result, curcumin loaded nanofiber satisfied the expectation and gave an opportunity to visualize real time monitoring of chicken spoilage.