Microencapsulation of olive leaf extract by freeze-drying: Effect of carrier composition on process efficiency and technological properties of the powders

The Valorisation of Melissa officinalis Distillation By-Products for the Production of Polyphenol-Rich Formulations

Lemon balm (Melissa officinalis) is an aromatic and medicinal plant, rich in bioactive ingredients and with superior antioxidant activity. The essential oil of this plant is an expensive product, so the use of the by-products of the essential oil industry is particularly useful. The aim of this research was to process Melissa officinalis distillation by-products to develop a series of polyphenol-rich formulations. In the present research, lemon balm was distilled in a laboratory-scale distiller, and the recovered by-product was used for further successive extractions with acetone and water, using a fixed-bed semi-batch extractor. Acetone extract exhibited relatively poor results as far as yield, phenolic composition and antiradical activity are concerned. However, the aqueous extract presented high yield in both total phenolic content (i.e., 111 mg gallic acid equivalents (GAE)/g, on a dry herb basis (dw)), and anti-radical capacity (205 mg trolox equivalents (TE)/g dw). On a dried extract basis, the results were also impressive, with total phenols reaching 322 mg GAE/g dry extract and antiradical capacity at 593 mg TE/g dry extract. The phenolic components of the extract were identified and quantified by HPLC-DAD. Rosmarinic acid was the major component and amounted to 73.5 mg/g dry extract, while the total identified compounds were quantified at 165.9 mg/g dry extract. Finally, formulations with two different wall materials (gum arabic-maltodextrin and maltodextrin) and two different drying methods (spray-drying and freeze-drying) were applied and evaluated to assess their performance, yield, efficiency and shelf-life of total phenolic content and rosmarinic acid concentration. From the present investigation, it is concluded that after one year of storage, rosmarinic acid does not decrease significantly, while total phenolic content shows a similar decrease for all powders. According to the yield and efficiency of microencapsulation, maltodextrin alone was chosen as the wall material and freeze-drying as the preferred drying method.

Microencapsulation of bioactive compound extracts using maltodextrin and gum arabic by spray and freeze-drying techniques

Microencapsulation techniques establish a protective barrier around a sensitive compound, reducing vulnerability to external influences and offering controlled release. This work evaluates microencapsulation of Brazilian seed known as pink pepper (Schinus terebinthifolius) extract incorporated with green propolis extract, (main propolis font from the South America native plant Baccharis dracunculifolia DC) to enhancement antioxidant activity through synergic interaction, comparing to the extracts individually. Four treatments were produced using maltodextrin and combined with gum arabic as encapsulating agent, employing two different microencapsulation technique applied (spray drying and freeze drying) to assess their impact on physicochemical properties. The incorporation of gum arabic into matrix yielded higher encapsulation efficiency values, exhibiting significant differences for both encapsulation techniques. Combining the two encapsulation agents afforded greater protection of the bioactive compounds, resulting in an increase of approximately 31 % in the inhibition of the DPPH● radical. In controlled release analysis, maltodextrin exhibits the best protective effect on total phenolic compounds during intestinal release, whereas combining maltodextrin and gum arabic enhanced protection during gastric phase. Microcapsules may contribute to the protection of important bioactive compound, possessing a wide range of applications such as flavors encapsulation in food industry, lipids, antioxidants and pharmaceutical industry for controlled drug release.

In situ extraction/encapsulation of olive leaves antioxidants in zein for improved oxidative stability of edible oils

This study presents a sustainable and cost-effective method for preserving the bioactivity of phenolic compounds in olive leaves (OLE) during their application. The extraction and nanoencapsulation of OLE were performed in a single-step process using a rotor-stator system with zein as the encapsulating agent. The nanoprecipitation step was carried out using an aqueous sodium caseinate solution, resulting in spherical particles with an average diameter of about 640 nm, as confirmed by Transmission Electron Microscopy. Thermal characterization showed that the produced nanoparticles were more thermally stable than free OLE until 250 °C, and FTIR spectra indicated effective interaction between the phenolic compounds and zein. Antioxidant activity was evaluated using TBARS, DPPH, ABTS, and FRAP assays, with results showing that encapsulated OLE had lower antioxidant activity than free OLE. The best antioxidant capacity results were determined by TBARS assay, with IC50 results equal to 43 and 103 µgOLE/mL for free and encapsulated OLE, respectively. No anti-inflammatory potential was detected for both samples using the RAW 264.7 model, and only free OLE showed cytotoxic activity against lung cancer and gastric carcinoma. Encapsulated and free OLE were used as antioxidants in soy, palm, and palm kernel oils and compared to BHT using Rancimat. The Schaal Oven Test was also performed, and the PARAFAC chemometric method analyzed the UV-Vis spectra, which revealed high stability of the oil when 300 mg or the nanoparticles were added per kg oil. Results suggested that zein-encapsulated olive leaf antioxidants can improve the oxidative stability of edible oils.

Effects of Maltodextrin and Gum Arabic Composition on the Physical and Antioxidant Activities of Dewaxed Stingless Bee Cerumen

BACKGROUND

Cerumen is a mixture of beeswax and plant resin made by stingless bees. It has antimicrobial and antioxidant properties and is often used in biological and therapeutic treatments. However, its adhesive characteristic makes cerumen challenging to process into powder.

METHODS

This study investigated the physical characteristics and antioxidant activity of the encapsulated freeze-dried dewaxed cerumen of Tetragonula laevicpes. The combination of coating materials at concentrations of 20%, 30% and 40% and carrier ratios of maltodextrin to gum arabic of 9:1, 5:5 and 3:7 were used to encapsulate dewaxed cerumen when freeze-dried; the control was maltodextrin at a concentration of 31.25%.

RESULTS

All carrier matrices showed high yields of >80% and similar powder characteristics of low moisture content, low water activity, high glass transition temperature and water dispersibility. Overall, antioxidant activities ranged from 69-80%, while the encapsulation efficiency of total phenolic content ranged from 46-68%. All carrier matrices show higher antioxidant activities than 31.25% maltodextrin, with the lowest antioxidant at 57%.

CONCLUSIONS

The carrier ratio of 5:5 resulted in better physical properties and retained 68% of polyphenolic activity in powders.

Phenolic profile of micro- and nano-encapsulated olive leaf extract in biscuits during in vitro gastrointestinal digestion

Olive leaf was characterized by a high content of phenols and flavonoids (oleuropein, luteolin, and their derivatives), presenting functional and health-related properties. The chemical instability of phenolics through technological processes and their degradation in the digestive system may negatively impact them, leading to lower absorption. This study evaluates the phenolic profile of micro- and nano-encapsulated olive leaf extract in biscuits during the INFOGEST static in vitro digestion, aiming to enhance stability and sensorial properties. Ultrasound-assisted extraction and chromatography characterized the extract, while spray drying (maltodextrin-glucose) and nano-encapsulation (maltodextrin, whey protein isolate, and arabic gum) techniques were used with specific solutions. Encapsulated formulations underwent microscopy (TEM, SEM) and encapsulation efficiency analysis. Micro- and nano-encapsulation improved biscuit functionality by enhancing phenolic stability during digestion. However, the highest concentration adversely affected sensory and textural parameters. These findings contribute to developing functional food products enriched with bioactive compounds, providing improved health benefits while maintaining sensory attributes.

Physicochemical and Biological Characterization of Encapsulated Olive Leaf Extracts for Food Preservation

Phenolic compounds in olive leaves have an excellent antioxidant activity and good antimicrobial properties. These bioactive molecules have beneficial properties for health, arousing great scientific and commercial interest. This study reports lyophilized olive leaf extracts (OLE) encapsulated by spray-drying using maltodextrins, maltodextrins-pectin and maltodextrins-gum Arabic as encapsulating agents. Lyophilized OLE were collected from two varieties cultivated in a harsh pedo-climatic conditions of the arid region of Tunisia. The effects of the genetic factor and the different encapsulating agents on the physicochemical properties of microcapsules and their behavior during storage, as well as their antimicrobial activities, were studied. Microcapsules successfully passed heat treatment and storage conditions and their antimicrobial activities were preserved. The encapsulating agent combination improved the encapsulation efficiency and the product yield in Zarrazi variety compared to Dhokar one. In addition, Dhokar variety microparticles showed the best heat stability at 4 and 25 °C after 90 days of storage and the higher inhibition percent against bacteria. The results of the present study evidenced that the best conditions for OLE encapsulation were obtained when the maltodextrins-pectin and maltodextrins-gum Arabic were combined to form a hybrid coating material.

Modifications to functional and biological properties of proteins of cowpea pulse crop by ultrasound-assisted extraction

Natural resource depletion, negative environmental effects and the challenge to secure global food security led to the establishment of the Sustainable Development Goals (SDGs). In need to explore underutilized sustainable protein sources, this study aims at isolating protein from cowpea by ultrasound-assisted extraction (UAE), where the techno-functional characteristics of the protein isolates were studied at different sonication conditions i.e., 100 W and 200 W at processing times ranging from 5 to 20 min. The US at 200 W-10 min produced the optimal results for all properties. In this process combination, there was an increase in protein yield, solubility, water-holding capacity, foaming capacity and stability, emulsion activity and stability, zeta-potential, and in-vitro protein digestibility from 31.78% to 58.96%, 57.26% to 68.85%, 3.06 g/g to 3.68 g/g 70.64% to 83.74%, 30.76% to 60.01%, 47.48% to 64.26%, 56.59% to 87.71%, -32.9 mV to -44.2 mV and 88.27% to 89.99%, respectively and particle size dropped from 763 nm to 559 nm in comparison to control. The microstructure and secondary-structure alterations of proteins caused by sonication were validated by SEM images, SDS-PAGE, and FTIR analyses. Sonication leads to acoustic cavitation and penetrate the cell walls, improving extraction from the solid to liquid phase. After sonication, the hydrophobic protein groups were exposed and proteins were partially denatured which increased its functionality. The findings demonstrated that UAE of cowpea protein improved yield, modify characteristics to fit the needs of the food industry, and contribute to achieving SDGs 2, 3, 7, 12, and 13.

Freeze-Drying Microencapsulation of Hop Extract: Effect of Carrier Composition on Physical, Techno-Functional, and Stability Properties

In this study, freeze-drying microencapsulation was proposed as a technology for the production of powdered hop extracts with high stability intended as additives/ingredients in innovative formulated food products. The effects of different carriers (maltodextrin, Arabic gum, and their mixture in 1:1 w/w ratio) on the physical and techno-functional properties, bitter acids content, yield and polyphenols encapsulation efficiency of the powders were assessed. Additionally, the powders' stability was evaluated for 35 days at different temperatures and compared with that of non-encapsulated extract. Coating materials influenced the moisture content, water activity, colour, flowability, microstructure, and water sorption behaviour of the microencapsulates, but not their solubility. Among the different carriers, maltodextrin showed the lowest polyphenol load yield and bitter acid content after processing but the highest encapsulation efficiency and protection of hop extracts' antioxidant compounds during storage. Irrespective of the encapsulating agent, microencapsulation did not hinder the loss of bitter acids during storage. The results of this study demonstrate the feasibility of freeze-drying encapsulation in the development of functional ingredients, offering new perspectives for hop applications in the food and non-food sectors.

Polysaccharide-based porous biopolymers for enhanced bioaccessibility and bioavailability of bioactive food compounds: Challenges, advances, and opportunities

Bioactive food compounds, such as lycopene, curcumin, phytosterols, and resveratrol, have received great attention due to their potential health benefits. However, these bioactive compounds (BCs) have poor chemical stability during processing and low bioavailability after consumption. Several delivery systems have been proposed for enhancing their stability and bioavailability. Among these methods, porous biopolymers have emerged as alternative encapsulation materials, as they have superior properties like high surface area, porosity, and tunable surface chemistry to entrap BCs. This reduces the crystallinity (especially for the lipophilic ones) and particle size, and in turn, increases solubilization and bioavailability. Also, loading BCs into the porous matrix can protect them against environmental stresses such as light, heat, oxygen, and pH. This review introduces polysaccharide-based porous biopolymers for improving the bioaccessibility/bioavailability of bioactive food compounds and discusses their recent applications in the food industry. First, bioaccessibility and bioavailability are described with a special emphasis on the factors affecting them. Then, porous biopolymer fabrication methods, including supercritical carbon dioxide (SC-CO₂ ) drying, freeze-drying, and electrospinning and electrospraying, are thoroughly discussed. Finally, common polysaccharide-based biopolymers (i.e., starch, nanocellulose, alginate, and pectin) used for generating porous materials are reviewed, and their current and potential future food applications are critically discussed.

Recent Developments in the Microencapsulation of Fish Oil and Natural Extracts: Procedure, Quality Evaluation and Food Enrichment

Due to the beneficial health effects of omega-3 fatty acids and antioxidants and their limited stability in response to environmental and processing factors, there is an increasing interest in microencapsulating them to improve their stability. However, despite recent developments in the field, no specific review focusing on these topics has been published in the last few years. This work aimed to review the most recent developments in the microencapsulation of fish oil and natural antioxidant compounds. The impact of the wall material and the procedures on the quality of the microencapsulates were preferably evaluated, while their addition to foods has only been studied in a few works. The homogenization technique, the wall-material ratio and the microencapsulation technique were also extensively studied. Microcapsules were mainly analyzed for size, microencapsulation efficiency, morphology and moisture, while in vitro digestion, flowing properties, yield percentage and Fourier transform infrared spectroscopy (FTIR) were used more sparingly. Findings highlighted the importance of optimizing the most influential variables of the microencapsulation procedure. Further studies should focus on extending the range of analytical techniques upon which the optimization of microcapsules is based and on addressing the consequences of the addition of microcapsules to food products.

Impact of Freeze- and Spray-Drying Microencapsulation Techniques on β-Glucan Powder Biological Activity: A Comparative Study

The study compares the impact of freeze- and spray-drying (FD, SD) microencapsulation methods on the content of β-glucan, total polyphenols (TP), total flavonoids (TF), phenolic acids (PA), and antioxidant activity (AA) in commercially β-glucan powder (Pleurotus ostreatus) using maltodextrin as a carrier. Morphology (scanning electron microscopy- SEM), yield, moisture content (MC), and water activity (aw) were also evaluated in the samples. Our examinations revealed significant structural differences between powders microencapsulated by the drying methods. As compared to non-encapsulated powder, the SD powder with yield of 44.38 ± 0.55% exhibited more reduced (p < 0.05) values for aw (0.456 ± 0.001) and MC (8.90 ± 0.44%) than the FD one (yield: 27.97 ± 0.33%; aw: 0.506 ± 0.002; MC: 11.30 ± 0.28%). In addition, the highest values for β-glucan content (72.39 ± 0.38%), TPC (3.40 ± 0.17 mg GAE/g), and TFC (3.07 ± 0.29 mg QE/g) have been detected in the SD powder. Our results allow for the conclusion that the SD microencapsulation method using maltodextrin seems to be more powerful in terms of the β-glucan powder yield and its contents of β-glucan, TP, and TF as compared to the FD technique.

Valorization of olive processing by-products via drying technologies: a case study on the recovery of bioactive phenolic compounds from olive leaves, pomace, and wastewater

Olive by-products are rich sources of phenolic compounds and their valorization is a favorable approach in line with sustainable development goals of the United Nations (UN) organization to promote well-being and production of healthier products; also, to deal with the environmental and economic subjects resulting in more profitability in the olive oil industry. The production of value-added ingredients from these by-products is not extensively exploited on the industrial scale. Drying is a critical pretreatment before extraction that can have a direct impact on the recovery and yield of the available bioactive compounds in olive by-products. In order to produce more stable and high quality phenolic products, encapsulation using spray and freeze drying is used. In this study, the effect of the drying process before and after extraction of bioactive compounds from olive by-products as a valuable source of phenolic compounds is reviewed. In addition, fortification using these ingredients and their incorporation in food formulations is also investigated.

Food-Derived Bioactive Molecules from Mediterranean Diet: Nanotechnological Approaches and Waste Valorization as Strategies to Improve Human Wellness

The beneficial effects of the Mediterranean diet (MedDiet), the most widely followed healthy diet in the world, are principally due to the presence in the foods of secondary metabolites, mainly polyphenols, whose healthy characteristics are widely recognized. However, one of the biggest problems associated with the consumption of polyphenols as nutraceutical adjuvant concerns their bioavailability. During the last decades, different nanotechnological approaches have been developed to enhance polyphenol bioavailability, avoiding the metabolic modifications that lead to low absorption, and improving their retention time inside the organisms. This review focuses on the most recent findings regarding the encapsulation and delivery of the bioactive molecules present in the foods daily consumed in the MedDiet such as olive oil, wine, nuts, spice, and herbs. In addition, the possibility of recovering the polyphenols from food waste was also explored, taking into account the increased market demand of functional foods and the necessity to obtain valuable biomolecules at low cost and in high quantity. This circular economy strategy, therefore, represents an excellent approach to respond to both the growing demand of consumers for the maintenance of human wellness and the economic and ecological exigencies of our society.

Alginate-based microparticles structured with different biopolymers and enriched with a phenolic-rich olive leaves extract: A physico-chemical characterization

Encapsulation of olive leaves extracts (OLE), rich of healthy components like Oleuropein, Hydroxytyrosol and Verbascoside, represents a new challenge to improve stability and nutritional value of food as well as a way to recover value added compounds from by-products, contributing to a more sustainable food system. In this context, OLE-loaded microbeads of Na alginate alone or in combination with Pectin, Na Caseinate or Whey protein isolates, were produced by emulsification internal ionotropic gelation. Encapsulation efficiency of the main phenolic compounds (Oleuropein, Hydroxytyrosol, Verbascoside) was carried out along with microparticles morphological characterization by scanning electron microscopy (SEM), thermal properties by differential scanning calorimetry (DSC) and color. Encapsulation efficiency resulted higher for Alginate/Pectin, whilst Alginate/Caseinate was the less performing system, probably due to the lower interaction with polyphenols. SEM revealed collapsed structures and continuous smooth surfaces for Alginate and Alginate/Pectin microbeads while more regular structures and porous surfaces were observed for Alginate/Caseinate and Alginate/Whey proteins. Higher hue angle and lower chroma values were observed for all the beads with respect to the pure extract, indicating a reduction of the yellow/brown color. DSC highlighted higher thermal stability for the microbeads in comparison to the original ingredients, showing also new thermal transitions related to bonds formation between polymers and OLE.

•

Verbascoside showed higher encapsulation efficiency compared to Oleuropein.

•

Alginate/Pectin was the most efficient system for encapsulation purposes.

•

Microstructural traits were linked to the encapsulation efficiency.

•

Thermal analysis revealed increased thermal stability of encapsulated polyphenols.

•

Encapsulation allowed a mitigation of the color properties of the olive leaf extract.

Effects of Different Drying Methods on the Characterization, Dissolution Rate and Antioxidant Activity of Ursolic Acid-Loaded Chitosan Nanoparticles

To improve the water solubility of ursolic acid (UA), UA-loaded chitosan nanoparticles were firstly prepared by the ionotropic gelation method and dried by freeze drying (FD), microwave freeze drying (MFD) and spray drying (SD). The characterization of UA-loaded chitosan nanoparticles was performed with particle size, drug loading (DL), scanning electron microscope (SEM), fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), dissolution studies and antioxidant activity. The results demonstrated that UA was successfully encapsulated into chitosan nanoparticles using sodium tripolyphosphate (TPP) as a cross-linker, with a 79% encapsulation efficiency. The spray-dried, UA-loaded chitosan nanoparticles had the lowest drug loading (11.8%) and the highest particle size (496.9 ± 11.20 nm). The particle size of UA-loaded chitosan nanoparticles dried by MFD and FD was lower, at 240.8 ± 12.10 nm and 184.4 ± 10.62 nm, respectively, and their antioxidant activity was higher than those nanoparticles dried by SD. Moreover, the drying time and energy consumption of UA-loaded chitosan nanoparticles dried by MFD and SD were lower than that of FD. The dissolution rates of UA-loaded chitosan nanoparticles prepared by FD and MFD were 60.6% and 57.1%, respectively, in a simulated gastric fluid, which was a greater value than SD (55.9%). Therefore, the UA-loaded chitosan nanoparticles encapsulation method, combined with MFD technology, showed a promising potential to improve the water solubility of UA.

Olive Leaves (Olea europaea L) Extract Loaded Lipid Nanoparticles: Optimization of Processing Parameters by Box-Behnken Statistical Design, in-vitro Characterization, and Evaluation of Anti-oxidant and Anti-microbial Activity

The present study was aimed to prepare and evaluated solid lipid nanoparticles (SLNs) of olive leaves extract powder (OLP) which contained many anti-oxidant and antimicrobial agents like oleuropein, a natural polyphenol. The major issue concern OLP was the instability due to environmental conditions and hence compromised bioactivity. To overcome this problem, SLNs were designed by hot homogenous followed by sonication technique to protect the drug and improve its antioxidant and antimicrobial activity. Lipids like compritol 888ATO and surfactant like tween 80 were used for the development and stabilization of SLNS and optimization was done by Box-Behnken statistical design (3x3). The optimized batch (F9) showed particle size, entrapment efficiency, PDI, and zeta potential 277.46 nm, 80.48%, 0.275, and －23.18 mV respectively. Optimized formulation (F9) exhibited a sustained release pattern up to 24 h with first-order release kinetic (R² = 0.9984) and the mechanism of drug release was found to be Fickian diffusion type (n = 0.441). Upon the stability study, it could be found that SLNs formulation was stable. Anti-oxidation and anti-microbial studies were conducted on optimized formulation and findings suggested that SLNs showed an improved radical scavenging activity and anti-microbial activity against Gram-positive (Staphylococcus aureus) and Gram-negative (Pseudomonas aeruginosa) bacteria. Finally, it was concluded that developed SLNs were able to protect and suitable for the delivery of OLP.

Physicochemical properties, microstructure, and storage stability of Pulicaria jaubertii extract microencapsulated with different protein biopolymers and gum arabic as wall materials

This study aimed to evaluate the possibility of using gum arabic (GA) with different protein materials namely whey protein isolate (WP), sodium caseinate (SC), and soybean protein (SP) as wall materials to encapsulate Pulicaria jaubertii extract (PJ) using freeze-drying. Four formulations of microencapsulation of Pulicaria jaubertii extract (MPJE) were produced, including WPGA-MPJE, SCGA-MPJE, SPGA-MPJE, and GA-MPJE. The formulations were stored at 4 °C and 25 °C for 28 days to assess the storage stability. The results indicated that mixtures of proteins with GA improved the physicochemical properties and bioactive content of the MPJE compared to GA-MPJE. The SCGA-MPJE formula showed optimal values of particle size (450.13 nm), polydispersity index (0.33), zeta potential (74.63 mV), encapsulation efficiency (91.07%), total phenolic content (25.51 g GAE g^-1 capsules), and antioxidants compounds, as well as presented a lower release of bioactive composites with high oxidative stability during storage at 4 °C and 25 °C. The microstructure of MPJE formulations showed a flat surface without any visible cracking on surfaces. The microcapsules prepared from protein mixtures with GA, especially the SCGA-MPJE formula, are the most efficient in encapsulating the plant extract derived from the PJ, which could be useful for application in various industrial fields.

Recent Trends in Pretreatment of Food before Freeze-Drying

Drying is among the most important processes and the most energy-consuming techniques in the food industry. Dried food has many applications and extended shelf life. Unlike the majority of conventional drying methods, lyophilization, also known as freeze-drying (FD), involves freezing the food, usually under low pressure, and removing water by ice sublimation. Freeze-dried materials are especially recommended for the production of spices, coffee, dried snacks from fruits and vegetables and food for military or space shuttles, as well as for the preparation of food powders and microencapsulation of food ingredients. Although the FD process allows obtaining dried products of the highest quality, it is very energy- and time consuming. Thus, different methods of pretreatment are used for not only accelerating the drying process but also retaining the physical properties and bioactive compounds in the lyophilized food. This article reviews the influence of various pretreatment methods such as size reduction, blanching, osmotic dehydration and application of pulsed electric field, high hydrostatic pressure or ultrasound on the physicochemical properties of freeze-dried food and drying rate.

New Freeze-Dried Andean Blueberry Juice Powders for Potential Application as Functional Food Ingredients: Effect of Maltodextrin on Bioactive and Morphological Features

Andean blueberry (Vaccinium meridionale Swartz) fruits are an underutilized source of anthocyanins and other valuable bioactive phytochemicals. The purpose of this work was to obtain Andean blueberry juice powders via freeze-drying processing and evaluate the effect of maltodextrin as a drying aid on their physicochemical, technological, microstructural, and bioactive characteristics. Andean blueberry juices were mixed with variable proportions of maltodextrin (20–50%); freeze-dried; and characterized in terms of their tristimulus color, Fourier transform infrared spectra (FTIR), moisture content, water activity, morphology, water solubility, flow properties, total polyphenols and anthocyanins content, and DPPH^•-scavenging capacity. The powders obtained presented suitable characteristics in terms of their water activity (<0.5), solubility (>90%), and bioactive compound recovery (>70% for total phenolics, and >60% for total monomeric anthocyanins), with antioxidant activities up to 4 mg equivalent of gallic acid/g of dry matter. Although an increased content of maltodextrin resulted in lower concentrations of phytochemicals, as expected, it also favored an increased % recovery (over 90% of total phenolics at the highest maltodextrin proportion) and improved their flow properties. Freeze-dried juice powders are a potential alternative for the stabilization and value addition of this fruit as a new source of functionality for processed foods.

Physical and Sensory Properties of Mayonnaise Enriched with Encapsulated Olive Leaf Phenolic Extracts

This work aimed to study the physical, structural, and sensory properties of a traditional full-fat mayonnaise (≈ 80% oil) enriched with an olive leaf phenolic extract, added as either free extract or encapsulated in alginate/pectin microparticles. Physical characterization of the mayonnaise samples was investigated by particle size, viscosity, lubricant properties, and color; a sensory profile was also developed by a quantitative descriptive analysis. The addition of the extract improved the dispersion degree of samples, especially when the olive leaf extract-loaded alginate/pectin microparticles were used. The encapsulated extract affected, in turn, the viscosity and lubricant properties. In particular, both of the enriched samples showed a lower spreadability and a higher salty and bitter perception, leading to a reduced overall acceptability. The results of this study could contribute to understanding the effects of the enrichment of emulsified food systems with olive by-product phenolic extracts, both as free and encapsulated forms, in order to enhance real applications of research outcomes for the design and development of healthy and functional formulated foods.