Plant tannin immobilized Fe3O4@SiO2 microspheres: A novel and green magnetic bio-sorbent with superior adsorption capacities for gold and palladium

Efficient adsorption of chloroquine phosphate by a novel sodium alginate/tannic acid double-network hydrogel in a wide pH range

In this work, a novel double-network composite hydrogel (SA/TA), composed of sodium alginate (SA) and tannic acid (TA), was designed and fabricated by a successive cross-linking method using Ti(IV) and Ca(II) as crosslinkers. SA/TA exhibited reinforced mechanical strength and anti-swelling properties because of the double-network structure. SA/TA was used as an adsorbent for removal of a popular antiviral drug, chloroquine phosphate (CQ), in water. The adsorption performance of SA/TA was systematically investigated, to study various effects including those of TA mass content, solution pH, adsorption time, and initial CQ concentration. Adsorption was also examined in presence of inorganic and organic coexisting substances commonly found in wastewater, and under different actual water samples. Batch experimental results indicated that SA/TA could maintain higher and more stable CQ uptakes within a wide solution pH range from 3.0 to 10.0, compared to its precursor, SA hydrogel, owing to the addition of TA-Ti(IV) coordination network. The maximum experimental CQ uptake exhibited by the 1:1 (by wt) SA/TA (SA/TA2) was as high as 0.699 mmol/g at the initial pH of 9.0. A high concentration of coexisting NaCl evidently reduced the CQ uptakes of SA/TA2 due to the electrostatic shielding effect, moreover, divalent cations including Ca(II) and Mg(II) also inhibited the adsorption of CQ due to competitive adsorption. However, humic acid had little effect on this adsorption. Considering the apparent adsorption performance, the aforementioned effects of various factors and the spectroscopic characterizations, multi-interactions are suggested for adsorption including chelation, electrostatic interactions, π-π electron donor-acceptor interaction and hydrogen bonding. SA/TA showed a slight loss in adsorption capacity toward CQ and sustained physicochemical structural stability, even after six adsorption-desorption cycles. In addition to CQ, SA/TA could be efficiently used for adsorption of two other antivirus drugs, namely, hydroxychloroquine sulfate and oseltamivir phosphate. This work provides an effective strategy for the design and fabrication of novel adsorbents that can effectively adsorb antiviral drugs over a wide pH range.

A new tannin-based adsorbent synthesized for rapid and selective recovery of palladium and gold: Optimization using central composite design

A tannin-based adsorbent was synthesized by pomegranate peel tannin powder modified with ethylenediamine (PT-ED) for the rapid and selective recovery of palladium and gold. To characterize PT-ED, field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS-Mapping), and Fourier transform infrared spectroscopy (FT-IR) were used. Central composite design (CCD) was used for optimization. The kinetic, isotherm, interference of coexisting metal ions, and thermodynamics were studied. The optimal conditions, including Au (III) concentration = 30 m g L - 1 , Pd (II) concentration = 30 m g L - 1 , adsorbent mass = 26 mg, pH = 2, and time = 26 min with the sorption percent more than 99 %, were anticipated for both metals using CCD. Freundlich model and pseudo-second-order expressed the isotherm and kinetic adsorption of the both metals. The inhomogeneity of the adsorbent surface and the multi-layer adsorption of gold and palladium ions on the PT-ED surface are depicted by the Freundlich model. The thermodynamic investigation showed that P d 2 + and A u 3 + ions adsorption via PT-ED was an endothermic, spontaneous, and feasible process. The maximum adsorption capacity of P d 2 + and A u 3 + ions on PT-ED was 261.189 m g g - 1 and 220.277 m g g - 1 , respectively. The probable adsorption mechanism of P d 2 + and A u 3 + ions can be ion exchange and chelation. PT-ED (26 mg) recovered gold and palladium rapidly from the co-existing metals in the printed circuit board (PCB) scrap, including Ca, Zn, Si, Cr, Pb, Ni, Cu, Ba, W, Co, Mn, and Mg with supreme selectivity toward gold and palladium. The results of this work suggest the use of PT-ED with high selectivity and efficiency to recover palladium and gold from secondary sources such as PCB scrap.

Precise stepwise recovery of platinum group metals from high-level liquid wastes based on SDB polymer-modified SiO2

Accurate separation and efficient recovery of platinum group metals (PGMs, mainly Ru, Rh and Pd) from high level liquid waste (HLLW) is a good choice for clean production and sustainable development of nuclear energy. Herein a novel SDB polymer modified silica-based amine-functionalized composite (dNbpy/SiO2-P) was synthesized for the separation and recovery of PGMs. Laser particle size analysis and BET results clarified the regular spherical and highly interconnected mesoporous structure of dNbpy/SiO2-P which is critical for the separation of PGMs. The removal percent of PGMs were over 99% on the optimized conditions. In addition, dNbpy/SiO2-P showed excellent selectivity (SFPd/M > 3805, SFRu/M > 1705, SFRh/M > 336) and repeatability (≥5). Interestingly, based on the different adsorption and desorption kinetics of PGMs, a double-column strategy is designed to solve the challenge of separating and recovering PGMs from HLLW. The enrichment factors of Pd(II), Ru(III) and Rh(III) reached 36.7, 8.2, and 1.2. The adsorption of PGMs was coordination mechanism and required the involvement of NO3- to maintain charge balance. The specific distribution of elements within the adsorbents and the changes in valence state were analyzed using depth-profiling XPS. Both depth-profiling XPS results and slope analysis revealed that the complex of dNbpy and PGMs is a 1 : 1 coordination structure. Overall, this work fills the gap that PGMs cannot be effectively separated and enriched from HLLW.

Solar-driven strongly coupled plasmonic Au nanoarrays on mesoporous silica nanodisks enable selective fungal and bacterial inactivation in well water

Well water is an important water source in isolated rural areas but easily suffers from microbial contamination. Herein, we anchored periodic Au nanoarrays on mesoporous silica nanodisks (Au-MSN) to fabricate a solar-driven nano-stove for well water disinfection. The solar/Au-MSN process completely inactivated 3.98, 6.55, 7.11 log10 cfu/mL, and 3.37 log10 pfu/mL of Aspergillus niger spores, Escherichia coli, chlorine-resistant Spingopyxis sp. BM1-1, and bacteriophage MS2 within 5 min, respectively. Moreover, the complete inactivation of various microorganisms (even at a viable but nonculturable state) was achieved in the flow-through reactor under natural solar light in real well water matrixes. Thorough characterizations and theoretical simulations verified that the densely anchoring strategy of Au-MSN's nanoarray worked on broadband absorption via the photon confinement effect, and trace amounts of Au can induce strong electromagnetic fields and collective localized heating. The resulting surge of 1O2 and heat synergically destroyed membranes, dysfunction cellular self-defense and metabolic system, induced intracellular oxidative stress, and ultimately inactivated microorganisms. Additionally, the 1O2-dominated oxidation and cell adhesion facilitated the selective disinfection in real well water matrixes. This study provides a cost-effective and practical solution for efficient well water disinfection, which assists isolated rural areas in getting safe drinking water.

Polyelectrolyte and polyelectrolyte complex-incorporated adsorbents in water and wastewater remediation - A review of recent advances

In recent years, polyelectrolyte-incorporated functional materials have emerged as novel adsorbents for effective remediation of pollutants in water and wastewater. Polyelectrolytes (PEs) are a special class of polymers with long chains of repeating charged moieties. Polyelectrolyte complexes (PECs) are obtained by mixing aqueous solutions of oppositely charged PEs. Herewith, this review discusses recent advances with respect to water and wastewater remediation using PE- and PEC-incorporated adsorbents. The review begins by highlighting some water resources, their pollution sources and available treatment techniques. Next, an overview of PEs and PECs is discussed, highlighting the evolving progress in their processing. Consequently, application of these materials in different facets of water and wastewater remediation, including heavy metal removal, precious metal and rare earth element recovery, desalination, dye and emerging micropollutant removal, are critically reviewed. For water and wastewater remediation, PEs and PECs are mostly applied either in their original forms, as composites or as morphologically-tunable complexes. PECs are deemed superior to other materials owing to their tunability for both cationic and anionic pollutants. Generally, natural and semi-synthetic PEs have been largely applied owing to their low cost, ready availability and eco-friendliness. Except dye removal and desalination of saline water, application of synthetic PEs and PECs is scanty, and hence requires more focus in future research.

A rationale for the rapid extraction of ultra-low-level uranyl ions in simulated bioassays regulated by Mn-dopants over magnetic nanoparticles

Although the sorption of uranyl ions and other heavy metal ions over magnetic nanoparticles is well reported, the parameters governing the sorption process over the magnetic nanoparticles have not been clearly enumerated. However, to increase the efficiency of the sorption over the surface of these magnetic nanoparticles, it is essential to understand the different structural parameters that are involved in the sorption process. The sorption of uranyl ions and other competitive ions in simulated urine samples at different pH was effectively accomplished over magnetic nanoparticles of Fe₃O₄ (MNPs) and Mn-doped Fe₃O₄ (Mn-MNPs). The MNPs and Mn-MNPs were synthesized using an easily modified co-precipitation method and were thoroughly characterised using several techniques, such as XRD, HRTEM, SEM, zeta potential, and XPS. The substitutional doping of Mn (1 to 5 at%) in the Fe₃O₄ lattice (Mn-MNPs) showed better sorption ability as compared to that of MNPs. The sorption properties of these nanoparticles were mainly correlated with the different structural parameters to understand the roles of surface charge and different morphological parameters. The interaction centres over the surface of MNPs with the uranyl ions were designated and the effects of ionic interactions with uranyl ions for these sites were calculated. Extensive XPS, ab initio calculations and zeta potential studies have provided deep insights into the different aspects that play key roles in the sorption process. These materials showed one of the best K_d values (∼3 × 10⁶ cm³) in a neutral medium with very low t_1/2 values (∼0.9 min). The fast sorption kinetics (very low t_1/2) makes them amongst the best sorption materials for uranyl ions and optimal for the quantification of ultra-low-level uranyl ions in simulated bioassays.

Optimization of Au(III) adsorption by the Taguchi method using pyrogallol functionalized silica nanoparticles

Pyrogallol molecules were successfully immobilized onto aminopropyl molecule functionalized MCM41 nanoparticles to obtain a fast and high gold adsorption capacity. The Taguchi statistical method was used to determine the factors affecting the gold(III) adsorption efficiency. The effect of six factors, pH, rate, adsorbent mass, temperature, initial Au(III) concentration and time, each with 5 levels, on the adsorption capacity was investigated by forming an L25 orthogonal. The analysis of variance (ANOVA) of each factor showed that all factors had significant effects on adsorption. pH 5, 250 rpm stirring speed, 0.025 g adsorbent mass, 40 °C temperature, 600 mg L^-1 Au(III) concentration and 15 min time were determined to be the optimum adsorption conditions. The maximum Langmuir monolayer adsorption capacity of APMCM1-Py for Au(III) was calculated to be 168.54 mg g^-1 at 303 K. The adsorption mechanism fits the pseudo-second-order kinetic model assuming the formation of a single chemical adsorption layer on the adsorbent surface. The adsorption isotherms are best represented using the Langmuir isotherm model. It exhibits a spontaneous endothermic behavior. FTIR, SEM, EDX and XRD analyses showed that mostly phenolic -OH functional groups adsorb Au(III) ions on the APMCMC41-Py surface with their reducing character. These results enable the rapid recovery of gold ions from weakly acidic aqueous solutions by reduction of APMCM41-Py NPs.

An Efficient Electrochemical Biosensor to Determine 1,5-Anhydroglucitol with Persimmon-Tannin-Reduced Graphene Oxide-PtPd Nanocomposites

1,5-Anhydroglucitol (1,5-AG) is a sensitive biomarker for real-time detection of diabetes mellitus. In this study, an electrochemical biosensor to specifically detect 1,5-AG levels based on persimmon-tannin-reduced graphene oxide-PtPd nanocomposites (PT-rGO-PtPd NCs), which were modified onto the surface of a screen-printed carbon electrode (SPCE), was designed. The PT-rGO-PtPd NCs were prepared by using PT as the film-forming material and ascorbic acid as the reducing agent. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-vis), and X-ray diffraction (XRD) spectroscopy analysis were used to characterise the newly synthesised materials. PT-rGO-PtPd NCs present a synergistic effect not only to increase the active surface area to bio-capture more targets, but also to exhibit electrocatalytic efficiency to catalyze the decomposition of hydrogen peroxide (H₂O₂). A sensitive layer is formed by pyranose oxidase (PROD) attached to the surface of PT-rGO-PtPd NC/SPCE. In the presence of 1,5-AG, PROD catalyzes the oxidization of 1,5-AG to generate 1,5-anhydrofuctose (1,5-AF) and H₂O₂ which can be decomposed into H₂O under the synergistic catalysis of PT-rGO-PtPd NCs. The redox reaction between PT and its oxidative product (quinones, PTox) can be enhanced simultaneously by PT-rGO-PtPd NCs, and the current signal was recorded by the differential pulse voltammetry (DPV) method. Under optimal conditions, our biosensor shows a wide range (0.1-2.0 mg/mL) for 1,5-AG detection with a detection limit of 30 μg/mL (S/N = 3). Moreover, our electrochemical biosensor exhibits acceptable applicability with recoveries from 99.80 to 106.80%. In summary, our study provides an electrochemical method for the determination of 1,5-AG with simple procedures, lower costs, good reproducibility, and acceptable stability.

Immobilization of tannin onto dialdehyde chitosan as a strategy for highly efficient and selective Au(III) adsorption

Recycling of Au(III) from wastewater can not only increase resource utilization but also reduce environmental pollution. Herein, a chitosan-based bio-adsorbent (DCTS-TA) was successfully synthesized via crosslinking reaction between tannin (TA) and dialdehyde chitosan (DCTS) for the recovery of Au(III) from the solution. The maximum adsorption capacity for Au(III) was 1146.59 mg/g at pH 3.0, which fitted well with the Langmuir model. The XRD, XPS, and SEM-EDS analyses demonstrated that Au(III) adsorption on DCTS-TA was a collaborative process involving electrostatic interaction, chelation, and redox reaction. Existence of multiple coexisting metal ions did not significantly affect the Au(III) adsorption efficiency, with >90 % recovery of DCTS-TA obtained after five cycles. DCTS-TA is a promising candidate for Au(III) recovery from aqueous solutions due to its easy preparation, environmental-friendliness, and high efficiency.

Bioinspired construction of magnetic nano stirring rods with radially aligned dual mesopores and intrinsic rapid adsorption of palladium

Quick and precise recovery of palladium (Pd) from electronic waste remains a serious task, owing to the strong acid and complexity of chemical compounds in leachate. Here, bioinspired construction of magnetic nano stirring rod with radially aligned dual mesopores and abundant 8-aminoquinoline (MNSR-DM-AQ) is proposed for selective and rapid extraction of Pd(II) from highly acidic sample solutions. Benefit from the unique dual mesoporous (12.4 nm and 3.6 nm) and the stirring motion under an external magnetic field, MNSR-DM-AQ possesses enhanced adsorption capacity and kinetics, achieving 11.62 mg g^-1 (97.2 % of the maximum adsorption capacity) in 15 min. Distribution coefficient (K_D = 299.0 mL g^-1), separation factor (α above 25.54) and concentration factor (CF = 230.2 mL g^-1) reveal the excellent selectivity of MNSR-DM-AQ towards Pd(II) when comparing with the coexisting ions (Ca(II), Co(II), Cu(II), Fe(II), Mg(II), Ni(II), Pb(II), Zn(II)). The adsorption mechanisms of MNSR-DM-AQ are ion exchange and chelation due to a strong affinity between Pd(II) and N. Meanwhile, 96.82 % of the captured Pd(II) can be easily eluted within 15 min, and the adsorption capacity remains stable after five adsorption-desorption cycles. It is worthwhile to mention that MNSR-DM-AQ exhibits a high adsorption capacity of 8.39 mg g^-1 from leachate of abandoned high-voltage patch capacitor, which is greatly desired in Pd(II) extraction from electronic waste.

Silica-coated modified magnetic nanoparticles (Fe3O4@SiO2@(BuSO3H)3) as an efficient adsorbent for Pd2+ removal

It is crucial to fabricate cost-effective and efficient strategies for monitoring and eliminating hazardous metals in the water supplies. Among the many techniques, adsorption is one of the most powerful and facile ways for eliminating pollutants from effluents. It is also crucial to engineering high-performance low-cost adsorbents. In this regard, herein, Fe₃O₄@SiO₂@(BuSO₃H)₃ as a modified core-shell magnetic silica nanoparticle embodies good selectivity to extract toxic metal ions from aquatic media. The present work investigated the removal performance of the magnetic adsorbent towards Pd²⁺ cation amongst the other heavy metal ions including Co²⁺, Pb²⁺, Hg²⁺, Cd²⁺, Cu²⁺, Zn²⁺ in aqueous solution. The flame atomic absorption spectrometry (FAAS) was utilized to assess the removal efficiency of the adsorbent. Several experimental parameters including elution condition, initial Pd(II) concentration, adsorbent dosage, initial pH of the solution, and contact time were explored to achieve the optimal conditions. The data of adsorption were very well with the Langmuir isotherm model, according to the adsorption isotherm mechanism experiments. In conclusion, this study lays the way for the development of novel magnetic adsorbents with high removal efficiencies for the removal of toxic metal ions from aqueous environment.

Recovery of Palladium and Gold from PGM Ore and Concentrates Using ZnAl-Layered Double Hydroxide@zeolitic Imidazolate Framework-8 Nanocomposite

Gold (Au) and palladium (Pd) are platinum group metals (PGMs) that are considered critical in society because they are required in several industrial applications. Their shortage has caused the urgent need for their recovery from secondary resources. Therefore, there is a need to develop functional materials with high adsorption capacity and selectivity for recovery of PGMs from various secondary sources. In this study, a Zn-Al-layered double hydroxide@zeolitic imidazolate framework-8 (Zn–Al–LDH@ZIF–8) nanocomposite was used as an adsorbent for the recovery of Au and Pd from ore concentrates. The Zn–Al–LDH@ZIF–8 nanocomposite was characterised using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, zeta potential, and X-ray diffraction (XRD) spectroscopy. The recovery of Au(III) and Pd(II) was achieved using ultrasound-assisted dispersive µ-solid-phase extraction (UA-D-µ-SPE) and their quantification was attained using an inductively coupled plasma mass spectrometer (ICP-MS). The results showed that the surface of the adsorbent remained positively charged in a wide pH range, which endowed the nanocomposite with high adsorption affinity towards Au(III) and Pd(II). Under optimised conditions, the equilibrium studies revealed that the adsorption of Au(III) and Pd(II) ions followed the Langmuir isotherm model with maximum sorption capacities of 163 mg g−1 and 177 mg g−1 for Au(III) and Pd(II), respectively. The nanocomposite possessed relatively good regeneration, reusability, and stability characteristics, with its performance decreasing by only 10% after five adsorption–desorption cycles.

Selective recovery of gold from dilute aqua regia leachate of waste printed circuit board by thiol-modified garlic peel

Garlic peel (GP) was chemically modified by using thiourea under hydrothermal treatment, which could selectively adsorb gold ions from the 1/10 dilute aqua regia media directly without needing the dangerous evaporation operation. The synthetic chloroauric solution and practical leach liquor of the waste PCB (printed circuit board) powder in dilute aqua regia were employed to assess the adsorption performance on the thiol-GP and the commercial quaternary ammonia anion resin of D201, respectively. It was experimentally confirmed that the adsorption efficiency of gold onto the thiol-GP and D201 resin both reached 100%, and the maximum adsorption capacity of thiol-GP gel was evaluated as 42.59 mg Au/g that was much larger than that of D201 resin (3.33 mg Au/g). The thiol-GP gel adsorption efficiency of other coexisting base metal ions like Cu²⁺, Ni²⁺, Al³⁺, and Fe³⁺ from dilute aqua regia leach liquor of the waste PCB powder was near zero, and only gold could be enriched by selective adsorption onto the thiol-GP gel. At least 3 cycles of adsorption/elution could be obtained without decreasing the adsorption efficiency drastically. The adsorbed gold on the thiol-GP was able to be eluted effectively by using the mixture solution of 0.1 M thiourea and 0.1 M hydrochloric acid, and finally the solid gold could be recovered by sodium borohydride through a reduction process. This study demonstrated a green, environmentally friendly, low-cost, and efficient method for selective recovery of gold from the dilute leach liquor (aqua regia) of waste circuit boards.

Facile synthesis of core–shell structured magnetic Fe 3 O 4 @SiO 2 @Au molecularly imprinted polymers for high effective extraction and determination of 4-methylmethcathinone in human urine samples

In this study, a novel material of core–shell structured magnetic molecularly imprinted polymers (Fe3O4@SiO2@Au (FSA)-MIPs) was successfully prepared for the rapid and selective determination of 4-methylmethcathinone (mephedrone, 4-MMC). The adsorption capacity of FSA-MIPs is 34.7 mg·g−1 at 308 K, which is significantly higher than magnetic non-imprinted polymers profiting from the imprinting effect. The FSA-MIPs have a short equilibrium (20 min) and could be reused more than six times. Moreover, the selectivity coefficients of FSA-MIPs for 4-MMC, 3,4-dimethylmethcathinone, butylone, 4-ethylmethcathinone, acetylfentanyl, and methylene blue are 4.01, 5.65, 7.62, 12.30, and 20.87 respectively, further indicating the markedly enhanced binding selectivity of FSA-MIPs. As an adsorbent, the FSA-MIPs were successfully applied for effective extraction of 4-MMC in three human urine samples with the recovery rates ranging from 85.5–92.6%. The results confirmed that the FSA-MIPs have good prospects in the extraction and separation of synthetic cathinones, which is suitable for further application in the criminal sciences field.

Sandwich Fluorescence Detection of Foodborne Pathogen Staphylococcus aureus with CD Fluorescence Signal Amplification in Food Samples

Timely detection of Staphylococcus aureus (S. aureus) is critical because it can multiply to disease−causing levels in a matter of hours. Herein, a simple and sensitive DNA tetrahedral (Td) fluorescence signal amplifier with blue carbon quantum dots (bCDs) was prepared for sandwich detection of S. aureus. bCD was modified at the apex of Td, and an aptamer on Td was used to accurately identify and “adsorb” the amplifier to the surface of S. aureus. Atomic force microscopy (AFM) demonstrates the successful preparation of this signal amplifier. The fluorescence intensity emitted in this strategy increased 4.72 times. The strategy showed a stronger fluorescence intensity change, sensitivity (linear range of 7.22 × 10⁰–1.44  × 10⁹ CFU/mL with a LOD of 4 CFU/mL), and selectivity. The recovery rate in qualified pasteurized milk and drinking water samples was 96.54% to 104.72%. Compared with simple aptamer sandwich detection, these fluorescence signal amplifiers have improved fluorescence detection of S. aureus. Additionally, this fluorescent signal amplification strategy may be applied to the detection of other food pathogens or environmental microorganisms in the future.

Removal of Hg2+ from desulfurization wastewater by tannin-immobilized graphene oxide

A novel adsorbent consisting of tannic acid (TA) immobilized on graphene oxide (GO) was proposed and used to remove Hg²⁺ from desulfurization wastewater. The morphology and physicochemical properties of tannin-immobilized graphene oxide (TAIGO) were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The characterization results showed that TA was successfully immobilized on GO, and that new functional groups were introduced on TAIGO. The effects of contact time, adsorbent dose, pH, and ion components on removal efficiency were evaluated. The adsorption process was found to be complete within 15 min, and the removal efficiency increased with increasing adsorbent dosage. The pH value affected the protonation of TAIGO and the form of Hg²⁺ in wastewater. High concentrations of Cl^- and SO₃^2- hindered the adsorption performance, whereas SO₄^2- and cations had a negligible effect. In addition, the excellent economic benefits of TAIGO were analyzed in an economic evaluation, and the Hg²⁺ removal efficiency remained at 88% after three recycles. A pseudo-second-order kinetic model (R = 0.9995) was used to fit the adsorption process, and the oxygen-containing functional groups and chelation reaction played critical roles in adsorption. TAIGO is a low-cost adsorbent with high Hg²⁺ removal efficiency and could be further used in practical desulfurization wastewater.

Highly efficient recovery of heavy rare earth elements by using an amino-functionalized magnetic graphene oxide with acid and base resistance

In the application of various magnetic materials for water treatment, control of surface resistance to acid and alkali corrosion remains largely overlooked, which could greatly extend their service life. We herein prepare amino grafted magnetic graphene oxide composites using a simple one-step cross-link reaction between the graphene oxide and magnetic Fe₃O₄/C nanoparticles. The as-prepared magnetic graphene oxide composites have long-term stability under acid and alkali solutions and shows an excellent performance in removing Ho(III), a representative rare earth element (REE) from water. The observed adsorption capacity of 72.1 mg Ho(III)/g exceeded that of most magnetic materials previously reported. Regeneration of the magnetic composites was realized in acid and alkali solutions but their structural integrity and physicochemical properties retained even after 18 adsorption-desorption cycles. The current adsorbent also shows excellent adsorption performance for other heavy REEs, such as Er(III), Eu(III), Lu(III), Tm(III), Y(III) and Yb(III). This work can provide a new strategy for constructing an acid and base resistance magnetic graphene oxide for the high-efficient recovery of heavy REEs from aqueous solution.

Magnetic polyphenol nanocomposite of Fe3O4/SiO2/PP for Cd(II) adsorption from aqueous solution

In order to solve the water solubility and difficult re-use of plant polyphenol (PP) in Cd(II) adsorption, PP was immobilized on the surface of magnetic material in this study. A core-shell nanocomposite Fe₃O₄/SiO₂/PP (∼18 nm) was synthesized with 3-8 nm SiO₂ and 2-5 nm PP. TGA analysis revealed the PP coating amount was 2.39%. VSM detection suggested that saturation magnetization of Fe₃O₄/SiO₂/PP was 45.94 emu/g. The adsorption equilibrium was reached in 2 h and the adsorption kinetics followed a pseudo-second-order model. The adsorption data fitted well to a Langmuir isotherm, achieving a 98.6% of Cd(II) removal at 0.6 g, pH 7.0, 298 K and 160 rpm. The adsorption capacity of Cd(II) on Fe₃O₄/SiO₂/PP highly depended on the pH. The adsorption capacity increased as the initial solution pH was increased in the range of 3.0-8.0. The adsorbed Cd(II) on Fe₃O₄/SiO₂/PP could be effectively desorbed by 0.1 mol/L of HNO₃ and the Fe₃O₄/SiO₂/PP still maintained a stable adsorption capacity after five cycles. The adsorption mechanism of Cd(II) on Fe₃O₄/SiO₂/PP is mainly dependent on complexation and electrostatic adsorption from the FTIR and XPS analyses. This study provided a new way for PP to remove Cd(II) from aqueous solution.

Synthesis of green magnetic biopolymer derived from Oak fruit hull tannin for efficient simultaneous adsorption of a mixture of Malachite Green and Sunset Yellow dyes from aqueous solutions

In the present study, a new bioadsorbent with polyhydroxyphenyl groups was synthesized as a tannin-based magnetic porous organic polymer by using from internal layer of Oak fruit hull (Oak Gal)...

Efficient and selective adsorption of Au(iii), Pt(iv), and Pd(ii) by a radiation-crosslinked poly(ionic liquid) gel

A PIL gel was prepared for Au(iii), Pt(iv), and Pd(ii) recovery. The PIL gel exhibited fast adsorption rates and excellent selectivity for target ions. Furthermore, the gel could efficiently separate Au(iii) from gold slag leaching solution.

Interactive effects of biochar and mussel shell activated concoctions on immobilization of nickel and their amelioration on the growth of rapeseed in contaminated aged soil

Mussel shell (MS) and biochar (BC) are commonly used for the remediation of metal contaminated soil. However, less research has been focused to examine the efficacy of their combinations to reduce metal toxicity in crop plants. This study was therefore conducted to investigate the effects of BC, MS and their activated concoctions on the soil properties, enzyme activities and nickel (Ni) immobilization in aged Ni contaminated soil. Moreover, the growth, photosynthetic pigments and anti-oxidative machnery of Brassica napus plants has also been investigated in order to determine amendments efficiency in reducing soil Ni toxicity for plants. The results showed that the application of Ni adversely affected soil health and trigged stress responses by inducing oxidative stress in B. napus. However, the incorporation of amendments reduced the bioavailability of Ni, and the concoctions of BC and MS showed promising results in the immobilization of Ni. Among various combinations of BC and MS, treatment with BC + MS (3:1) significantly reduced Ni uptake, decreased reactive oxygen species (ROS) and enhanced antioxidant defense of B. napus plants. Results showed that amendment's combinations stimulated the transcriptional levels of ROS scavenging enzymes and suppressed the expression level of Ni transporters. The morphological and physical characterization techniques (i.e. SEM, BET, EDS, FTIR and X-ray diffraction analyses) showed that amendment's combinations had relatively higher Ni adsorption capacity, indicating that BC and MS concoctions are efficient immobilizing agents for minimizing Ni availability, preventing oxidative toxicity and promoting growth and biomass production in rapeseed plants under metal stress conditions.

Effect of the length and aromaticity of N3-substituent on adsorption performance of imidazolium-based poly(ionic liquids) towards Pd (II)

Imidazolium-based poly(ionic liquids) (PILs) have been deemed as attractive candidates in the field of precious metal adsorption. However, their further performance optimization is hampered by a lack of an inner understanding of the structure-adsorption performance relationship. In this research, electron and charge distributions of the imidazolium cations are tailored by changing the N3-substitute, and their adsorption performances for PdCl₄^2- were optimized accordingly. Furthermore, the adsorption mechanism is studied by synthesizing corresponding ionic liquid (IL) monomers and their Pd-adducts. Interestingly, longer N3 alkyl chains lead to more hydrogen bonds with PdCl₄^2-, which is beneficial for adsorption. Whereas, it is unfavorable for attracting anions due to a decrease in electrostatic potential (ESP) around cations caused by longer alkyl chains and aromatic substituents at N3 position. It is worth noting that the ESP around the cations plays a more important role in the adsorption process, which determines the adsorption performance of the imidazolium-based PILs. Thus, the performance optimization of imidazolium-based PILs should mainly focus on increasing the ESP of imidazolium cations in the future. This research highlights the potential of the cationic structure-adsorption performance relationship of PILs, which opens a new avenue to develop adsorbents for the metallurgical industry.

Efficient Gold Recovery from Cyanide Solution Using Magnetic Activated Carbon

Activated carbon has been used for gold recovery in the gold mining industry commercially for decades. The high specific surface area and porosity, good affinity to aurocyanide ions, and abundant resources make activated carbon an efficient and economical material for the adsorption of aurocyanide. However, the separation of activated carbon from the slurry is usually a challenge, and the adsorption rate of activated carbon is limited by the coarse particle size. Herein, a simple and sustainable way to recover gold from cyanide solution using magnetic activated carbon synthesized via a solvothermal method has been developed. The synthesized magnetic activated carbon possesses good magnetism (44.57 emu/g) and specific surface area equal to 249.7 m²/g. The magnetic activated carbon showed 99.1% recovery efficiency of gold from 10 mg/L solution within 5 h, which is much faster compared to the commercial granular activated carbon, and the magnetic activated carbon can be easily separated from the solution with an external magnet. The adsorption ability of this magnetic activated carbon has been tested under different conditions in the cyanide solution, the adsorption isotherm and kinetics are also investigated. The magnetic activated carbon was also recycled in the adsorption-desorption tests and showed good reusability.

Organic and inorganic amendments for the remediation of nickel contaminated soil and its improvement on Brassica napus growth and oxidative defense

In-situ stabilization has been considered an effective way to remediate metal contaminated soil. Thus, pot experiments were undertaken to investigate the effectiveness of multiple stabilization agents such as biochar (BC), mussel shell (MS), zeolite (ZE) and limestone (LS) on the immobilization of Ni, physicochemical features and enzyme activities in polluted soil. Results showed that the sole application of Ni adversely affected the rapeseed growth, photosynthetic pigments, and antioxidative defense. However, the addition of amendments to the contaminated soil significantly reduced Ni bioavailability. The XRD analysis confirmed the formation of Ni related ligands and FTIR showed the presence of hydroxyl, carboxyl and sulfur functional groups, as well as complexation and adsorption of Ni on amendments. Among multiple amendments, biochar significantly enhanced plant biomass attributes and total chlorophyll content. Moreover, addition of amendments also strengthened the antioxidant defense by decreasing Ni induced oxidative stress (H₂O₂ and O₂^.-), increased macronutrient availability, reduced Ni uptake and improved soil health. The qPCR analysis showed that the Ni transporters were significantly suppressed by amendments, which is correlated with the lower accumulation of Ni in rapeseed. The present study showed that immobilizing agents, especially biochar, is an effective amendment to immobilize Ni in soil, which restricts its entry into the food chain.

An Imidazole Thione-Modified Polyhedral Oligomeric Silsesquioxane for Selective Detection and Adsorptive Recovery of Au(III) from Aqueous Solutions

Developing a material toward simultaneous detection and recovery of gold ions (Au(III)) is highly desirable for the economy and the environment. Herein, we report a highly efficient dual-function material for simultaneous Au(III) detection and recovery by simply introducing abundant imidazole thione and thioether groups in one system. This material, that is, an imidazole thione-modified polyhedral oligomeric silsesquioxane (POSS-2), was prepared by a mild reaction of an imidazolium-containing POSS and sulfur at ambient temperature. The POSS-2 suspension in water can rapidly and selectively detect Au(III) with a very low limit of detection of 1.2 ppb by fluorescence quenching or a visualized color change from white to dark orange. POSS-2 can also selectively and efficiently capture Au(III) with a maximum adsorption uptake of 1486.5 mg/g. The adsorption process well fits with the pseudo-second-order kinetic and Langmuir models. The intriguing dual-function performance is better than most of the previous Au(III) probes or adsorbents. The mechanism study reveals that the detection and adsorption behavior are mainly caused by the redox reaction and coordination between imidazole thione and thioether groups and Au(III). Furthermore, POSS-2 was successfully utilized to extract gold without interference from a discard CPU. These results indicate the potential application of the present dual-function material for Au(III) detection and recovery from aqueous solutions. More dual-functional materials could be designed and prepared by this simple strategy.

Recent advances in the application of magnetic Fe3O4 nanomaterials for the removal of emerging contaminants

Emerging contaminants (ECs) are widely distributed and potentially hazardous to human health and the ecological system. However, traditional wastewater treatment techniques are not sufficient to remove ECs. Magnetic nanomaterials are made of ferromagnetic or superparamagnetic magnetic elements such as iron and nickel, which can be easily separated from the aqueous solution, making them ideal adsorbents for contaminants in water. This review focused on the synthesis approaches of magnetic Fe₃O₄ nanoparticles (MFNs), as well as surface modification in order to improve their stability and functional diversity. Also, a detailed summary on the state-of-art application of magnetic nanomaterials on the removal of ECs was addressed. Additionally, challenges and future prospective of applying magnetic nanomaterials into real-world cases were discussed, in which the green and simple synthesis and evaluation of the toxic effects of MFNs are still of great challenge. This work summarizes the recent progress of using magnetic nanomaterials as promising and powerful tools in the treatment of ECs-contaminated water, benefiting researchers interested in nanomaterials and environmental studies.

An update on ACE2 amplification and its therapeutic potential

The renin angiotensin system (RAS) plays an important role in the pathogenesis of variety of diseases. Targeting the formation and action of angiotensin II (Ang II), the main RAS peptide, has been the key therapeutic target for last three decades. ACE‐related carboxypeptidase (ACE2), a monocarboxypeptidase that had been discovered 20 years ago, is one of the catalytically most potent enzymes known to degrade Ang II to Ang‐(1‐7), a peptide that is increasingly accepted to have organ‐protective properties that oppose and counterbalance those of Ang II. In addition to its role as a RAS enzyme ACE2 is the main receptor for SARS‐CoV‐2. In this review, we discuss various strategies that have been used to achieve amplification of ACE2 activity including the potential therapeutic potential of soluble recombinant ACE2 protein and novel shorter ACE2 variants.

Uptake and Recovery of Gold from Simulated Hydrometallurgical Liquors by Adsorption on Pine Bark Tannin Resin

The recovery of critical and precious metals from waste electrical and electronic equipment (WEEE) is an environmental and economic imperative. Biosorption has been considered a key technology for the selective extraction of gold from hydrometallurgical liquors obtained in the chemical leaching of e-waste. In this work, the potential of tannin resins prepared from Pinus pinaster bark to sequester and recover gold(III) from hydrochloric acid and aqua regia solutions was assessed. Equilibrium isotherms were experimentally determined and maximum adsorption capacities of 343 ± 38 and 270 ± 19 mg g−1 were found for Au uptake from HCl and HCl/HNO3 (3:1 v/v) solutions containing 1.0 mol L−1 H+. Higher levels of acidity (and chloride ligands) significantly impaired the adsorption of gold from both kinds of leaching solutions, especially in the aqua regia system, in which the adsorbent underperformed. Pseudo-first and pseudo-second order models successfully described the kinetic data. The adsorbent presented high selectivity towards gold. Actually, in simulated aqua regia WEEE liquors, Au(III) was extensively adsorbed, compared to Cu(II), Fe(III), Ni(II), Pd(II), and Zn(II). In three adsorption–desorption cycles, the adsorption capacity of the regenerated adsorbent moderately decreased (19%), although the gold elution in acidic thiourea solution had been quite limited. Future research is needed to examine more closely the elution of gold from the exhausted adsorbents. The results obtained in this work show good perspectives as regards the application of pine bark tannin resins for the selective extraction of Au from electronic waste leach liquors.

Tannin-Based Hybrid Materials and Their Applications: A Review

Tannins are eco-friendly, bio-sourced, natural, and highly reactive polyphenols. In the past decades, the understanding of their versatile properties has grown substantially alongside a continuously broadening of the tannins' application scope. In particular, recently, tannins have been increasingly investigated for their interaction with other species in order to obtain tannin-based hybrid systems that feature advanced and/or novel properties. Furthermore, in virtue of the tannins' chemistry and their high reactivity, they either physicochemically or physically interact with a wide variety of different compounds, including metals and ceramics, as well as a number of organic species. Such hybrid or hybrid-like systems allow the preparation of various advanced nanomaterials, featuring improved performances compared to the current ones. Consequently, these diverse-shaped materials have potential use in wastewater treatment or catalysis, as well as in some novel fields such as UV-shielding, functional food packaging, and biomedicine. Since these kinds of tannin-based hybrids represent an emerging field, thus far no comprehensive overview concerning their potential as functional chemical building blocks is available. Hence, this review aims to provide a structured summary of the current state of research regarding tannin-based hybrids, detailed findings on the chemical mechanisms as well as their fields of application.

Facile preparation of L-cysteine-modified cellulose microspheres as a low-cost adsorbent for selective and efficient adsorption of Au(III) from the aqueous solution

A facile method to synthesize adsorbent based on cellulose modified by amino acid was developed. The novel L-cysteine-functionalized adsorbent for Au(III) recovery was synthesized via radiation grafting technique. Glycidyl methacrylate (GMA) was grafted on the surface of microcrystalline cellulose microsphere (MCC); next, ring-opening reaction was performed to immobilize L-cysteine. The adsorption abilities of the adsorbent (CysR) were tested. Batch experiments suggested that the maximum adsorption capacity of Au(III) is 714.28 mg/g calculated by Langmuir model. The adsorption kinetic data was followed by pseudo-second-order model. CysR showed excellent selectivity for Au(III) even the concentration of competing ions was all ten times than that of Au(III). The column experiments revealed that Au(III) could be efficiently adsorbed by CysR competition with equal amounts of Ni(II) and Zn(II). Moreover, XPS analysis demonstrated that the adsorbed Au(III) was reduced to Au(I) and Au(0). The adsorption performance certified that CysR was a promising adsorbent for Au(III) recovery.

Selective Adsorption, Reduction, and Separation of Au(III) from Aqueous Solution with Amine-Type Non-Woven Fabric Adsorbents

Herein, adsorption, separation, and reduction of Au(III) from its aqueous solution were studied with different amine-type, non-woven fabric (NF) adsorbents fabricated with radiation-induced graft polymerization. The adsorbents exhibited different adsorption capacities of Au(III) over a concentration range of hydrochloric acid (HCl) from 5 mM to 5 M, and the diethylamine (DEA)-type adsorbent performed best under all test conditions. The DEA-type adsorbent was inert toward other metal ions, including Cu(II), Pb(II), Ni(II), Zn(II) and Li(I), within the fixed concentration range of HCl. Flow-through adsorption tests indicated DEA-type adsorbent exhibited a rapid recovery and high adsorption capacity of 3.23 mmol/g. Meanwhile, DEA-type adsorbent also exhibited high selectivity and rapid extraction for Au(III) from its mixed solution with Pt(IV) and Pd(II). After adsorption, the reduction of Au(III) was confirmed by XRD spectra, TEM, and digital micrograph images. The results indicated that nano-sized Au particles were mainly concentrated on the adsorbent in 5 mM HCl solution. In 1 M HCl solution, not only nano-sized Au particles were found, but also micro-size Au plates precipitation occurred. This study provides a novel material for selective and efficient gold uptake from aqueous solution.

Preparation, surface functionalization and application of Fe3O4 magnetic nanoparticles

This paper reviews recent developments in the preparation, surface functionalization, and applications of Fe₃O₄ magnetic nanoparticles. Especially, it includes preparation methods (such as electrodeposition, polyol methods, etc.), organic materials (such as polymers, small molecules, surfactants, biomolecules, etc.) or inorganic materials (such as silica, metals, and metal oxidation/sulfide, functionalized coating of carbon surface, graphene, etc.) and its applications (such as magnetic separation, protein fixation, magnetic catalyst, environmental treatment, medical research, etc.). In the end, some existing challenges and possible future trends in the field were discussed.

Selective and efficient adsorption of Au (III) in aqueous solution by Zr-based metal-organic frameworks (MOFs): An unconventional way for gold recycling

Recycling precious metals from secondary resources is of great environmental and economic significance. In this study, the Zr-based MOFs UiO-66-NH₂ was synthesized and used to adsorb Au (III) in aqueous solution. The ultrafine particle size (∼50 nm), excellent crystallinity and huge specific surface area (1039.2 m² ·g^-1) were verified by transmission electron microscope (TEM), powder X-ray diffraction (PXRD) and surface area analysis. About 50 % Au (III) was adsorbed within 6 min and the maximum adsorption capacity at 298 K reached up to 650 mg·g^-1, showing superiority to traditional adsorbents. The general order kinetics model and Liu equation were suitable to describe the adsorption process, which was spontaneous, endothermic and driven by the increasing system entropy. Electrostatic attraction between -NH₃⁺ and Au (III) anions and inner complexation to Zr-OH played a vital role in adsorption. Au (Ⅲ) was reduced to Au° by amino groups via redox reaction certified by X-ray photoelectron spectroscopy (XPS), PXRD and high-resolution transmission electron microscopy (HRTEM) analysis. Moreover, UiO-66-NH₂ displayed high selectivity, robust stability and excellent reusability, making it an ideal candidate for gold recycling in industrial practice.

Two Novel BODIPY-Functional Magnetite Fluorescent Nano-Sensors for Detecting of Cr(VI) Ions in Aqueous Solutions

In this study, we developed two different very sensitive magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors for the selective detection of Cr(VI) ions. The Cr(VI) metal ions sensing is based on the fluorescent quenching of BODIPY functionalized with Fe₃O₄@SiO₂-TPED and Fe₃O₄@SiO₂-TMPTA nanoparticles in the ethanol-water environment. Characterization of the newly synthesized fluorescent BODIPY compound was performed on a ¹H and ¹³C-NMR spectrometer. The morphology, chemical and physical properties of the sensing nano-sensors were studied by transmission thermogravimetric analysis (TGA), X-ray diffraction (XRD), energy dispersive X-ray (EDX), scanning electron microscopy (SEM), FT-IR spectroscopy, and transmission electron microscopy (TEM). UV-visible and fluorescent spectroscopy were used to characterize BODIPY functionalized magnetite fluorescent nano-sensors. Characterization measurements revealed that the mean particle diameter of magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors was 18.5 and 19 nm, respectively. The magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors (0.1 gL^-1 in EtOH/H₂O, v/v (3/7)) showed fluorescence quenching responses towards Cr(VI) ions in the medium at pH:1. The fluorescence quenches of the magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors by Cr(VI) were completed in first 5 and 3 min. Respectively. These features provide potential uses of BODIPY functionalized magnetite fluorescent nano-sensors (Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY) as a new class of non-toxic sensors for environmental applications. Graphical Abstract.

Megamerger of biosorbents and catalytic technologies for the removal of heavy metals from wastewater: Preparation, final disposal, mechanism and influencing factors

Heavy metal pollution, because of its high toxicity, non-biodegradability and biological enrichment, has been identified as a global aquatic ecosystems threat in recent decades. Due to the high efficiency, low cost, satisfactory recyclability, easy storage and separation, biosorbents have exhibited a promising prospect for heavy metals treatment in aqueous phase. This article comprehensively summarized different types of biosorbents derived from available low-cost raw materials such as agricultural and forestry wastes. The raw materials obtained are treated with conventional pretreatment or novel methods, which can greatly enhance the adsorption performance of the biosorbents. The suitable immobilization methods can not only further enhance the adsorption performance of the biosorbents, but also facilitate the process of separating the biosorbents from the wastewater. In addition, once biosorbents are put into large-scale use, the final disposal problems cannot be avoided. Therefore, it is necessary to review the currently accepted final disposal methods of biosorbents. Moreover, through the analysis of the adsorption and desorption mechanisms of biosorbents, it is not only beneficial to find the better methods to improve the adsorption performance of the biosorbents, but also better to explain the influencing factors of adsorption effect for biosorbents. Especially, different from many researches focused on biosorbents, this work highlighted the combination of biosorbents with catalytic technologies, which provided new ideas for the follow-up research direction of biosorbents. Finally, the purpose of this paper is to inject new impetus into the future development of biosorbents.

Quantitative effects of Fe3O4 nanoparticle content on Li+ adsorption and magnetic recovery performances of magnetic lithium-aluminum layered double hydroxides in ultrahigh Mg/Li ratio brines

The quantitative effects of magnetic Fe₃O₄ nanoparticle content on Li⁺ adsorption and magnetic recovery performances of magnetic lithium-aluminum layered double hydroxides (MLDHs) were investigated systematically. MLDHs with different Fe₃O₄ nanoparticle contents were synthesized by a staged chemical coprecipitation method. The property disparities of these MLDHs were analyzed by various characterizations and results proved the existence of magnetic nanoparticles had no impairment on MLDHs crystal structure stability while the mesopores were lessened with the increasing Fe₃O₄ contents. In adsorption experiments using Qarhan Salt Lake brine with Mg/Li mass ratio of 284, the Li⁺ adsorption capacity of MLDHs presented a downtrend with the increasing Fe₃O₄, while the increased magnetic components had positive influence on the Li⁺ separation with Mg²⁺ on account of the steric effect. MLDHs presented excellent Li⁺ selectivity that the Mg/Li mass ratio of desorption solution was significantly decreased below 7.0. Relying on the superparamagnetism, MLDHs recovery all exceeded 97 % in the external magnetic field for only 10 min, and the magnetic recovery performance was promoted with more Fe₃O₄ nanoparticles. Furthermore, on the basis of experimental data, precise models were built and described well the correlations of Fe₃O₄ contents of MLDHs with Li⁺ adsorption capacity and magnetic recovery rate, respectively.

Recent advances in the recovery of metals from waste through biological processes

Wastes containing critical metals are generated in various fields, such as energy and computer manufacturing. Metal-bearing wastes are considered as secondary sources of critical metals. The conventional physicochemical methods of metals recovery are energy-intensive and cause further pollution. Low-cost and eco-friendly technologies including biosorbents, bioelectrochemical systems (BESs), bioleaching, and biomineralization, have become alternatives in the recovery of critical metals. However, a relatively low recovery rate and selectivity severely hinder their large-scale applications. Researchers have expanded their focus to exploit novel strain resources and strategies to improve the biorecovery efficiency. The mechanisms and potential applicability of modified biological techniques for improving the recovery of critical metals need more attention. Hence, this review summarize and compare the strategies that have been developed for critical metals recovery, and provides useful insights for energy-efficient recovery of critical metals in future industrial applications.