Augmenting the biodegradation of recalcitrant ethinylestradiol using Rhodopseudomonas palustris in a hybrid photo-assisted microbial fuel cell with enhanced bio-hydrogen production

Photo-assisted microbial fuel cell systems: critical review of scientific rationale and recent advances in system development

Bioelectrochemical systems such as microbial fuel cells (MFCs) have gained extensive attention due to their abilities to simultaneously treat wastewater and generate renewable energy resources. Recently, to boost the system performance, the photoelectrode has been incorporated into MFCs for effectively exploiting the synergistic interaction between light and microorganisms, and the resultant device is known as photo-assisted microbial fuel cells (photo-MFCs). Combined with the metabolic reaction of organic compounds by microorganisms, photo-MFCs are capable of simultaneously converting both chemical energy and light energy into electricity. This article aims to systematically review the recent advances in photo-MFCs, including the introduction of specific photosynthetic microorganisms used in photo-MFCs followed by the discussion of the fundamentals and configurations of photo-MFCs. Moreover, the materials used for photoelectrodes and their fabrication approaches are also explored. This review has shown that the innovative strategy of utilizing photoelectrodes in photo-MFCs is promising and further studies are warranted to strengthen the system stability under long-term operation for advancing practical application.

Microbial Biofilms for Environmental Bioremediation of Heavy Metals: a Review

Heavy metal pollution caused due to various industrial and mining activities poses a serious threat to all forms of life in the environment because of the persistence and toxicity of metal ions. Microbial-mediated bioremediation including microbial biofilms has received significant attention as a sustainable tool for heavy metal removal as it is considered safe, effective, and feasible. The biofilm matrix is dynamic, having microbial cells as major components with constantly changing and evolving microenvironments. This review summarizes the bioremediation potential of bacterial biofilms for different metal ions. The composition and mechanism of biofilm formation along with interspecies communication among biofilm-forming bacteria have been discussed. The interaction of biofilm-associated microbes with heavy metals takes place through a variety of mechanisms. These include biosorption and bioaccumulation in which the microbes interact with the metal ions leading to their conversion from a highly toxic form to a less toxic form. Such interactions are facilitated via the negative charge of the extracellular polymeric substances on the surface of the biofilm with the positive charge of the metal ions and the high cell densities and high concentrations of cell-cell signaling molecules within the biofilm matrix. Furthermore, the impact of the anodic and cathodic redox potentials in a bioelectrochemical system (BES) for the reduction, removal, and recovery of numerous heavy metal species provides an interesting insight into the bacterial biofilm-mediated bioelectroremediation process. The review concludes that biofilm-linked bioremediation is a viable option for the mitigation of heavy metal pollution in water and ecosystem recovery.

Anoxygenic phototrophic purple non-sulfur bacteria: tool for bioremediation of hazardous environmental pollutants

The extraordinary metabolic flexibility of anoxygenic phototrophic purple non-sulfur bacteria (PNSB) has been exploited in the development of various biotechnological applications, such as wastewater treatment, biohydrogen production, improvement of soil fertility and plant growth, and recovery of high-value compounds. These versatile microorganisms can also be employed for the efficient bioremediation of hazardous inorganic and organic pollutants from contaminated environments. Certain members of PNSB, especially strains of Rhodobacter sphaeroides and Rhodopseudomonas palustris, exhibit efficient remediation of several toxic and carcinogenic heavy metals and metalloids, such as arsenic, cadmium, chromium, and lead. PNSB are also known to utilize diverse biomass-derived lignocellulosic organic compounds and xenobiotics. Although biodegradation of some substituted aromatic compounds by PNSB has been established, available information on the involvement of PNSB in the biodegradation of toxic organic pollutants is limited. In this review, we present advancements in the field of PNSB-based bioremediation of heavy metals and organic pollutants. Furthermore, we highlight that the potential role of PNSB as a promising bioremediation tool remains largely unexplored. Thus, this review emphasizes the necessity of investing extensive research efforts in the development of PNSB-based bioremediation technology.

Assessment of the effective parameters for the enhancement of light-harvesting power in the photoelectrochemical microbial fuel cell

ABSTRACTPhoto-assisted microbial fuel cells (PMFCs) are novel bioelectrochemical systems that employ light to harvest bioelectricity and efficient contaminant reduction. In this study, the impact of different operational conditions on the electricity generation outputs in a photoelectrochemical double chamber configuration Microbial fuel cell using a highly useful photocathode are evaluated and their trends are compared with the photo reduction efficiency trends. As a photocathode, a binder-free photo electrode decorated with dispersed polyaniline nanofiber (PANI)-cadmium sulfide Quantum Dots (QDs) is prepared here to catalyse the chromium (VI) reduction reaction in a cathode chamber with an improvement in power generation performance. Bioelectricity generation is examined in various process conditions like photocathode materials, pH, initial concentration of catholyte, illumination intensity and time of illumination. Results show that, despite the harmful effect of the initial contaminant concentration on the reduction efficiency of the contaminant, this parameter exhibits a superior ability for improving the power generation efficiency in a Photo-MFC. Furthermore, the calculated power density under higher light irradiation intensity has experienced a significant increase, which is due to an increment in the number of photons produced and an increase in their chance of reaching the electrodes surface. On the other hand, additional results indicate that the power generation decreases with the rise of pH and has witnessed the same trend as the photo reduction efficiency.

Framework to improve biohydrogen generation with estrogen co-metabolism under complete suppression of nitrogen source

The current work provides insights for improving the hydrogen output while degrading emerging contaminants using Rhodopseudomonas palustris. The changes in the growth rate of a microorganism due to different substrate inputs affects the hydrogen production due to metabolic route changes. The different ratios of glutamate and glycerol as nitrogen and carbon sources along with the presence of ethinylestradiol (EE2) in the photofermenter affected the flux of electrons being directed towards biosynthesis and biohydrogen generation. The combination of glutamate and glycerol in different ratios (Glu:Gly; 0, 0.20 and 0.54) along with estrogen showed no significant difference in the bacteriochlorophyll concentrations. The highest biomass concentration (0.013 h^-1) was in ratio of 0.54 while maximum specific hydrogen production (1.9 ± 0.05 ml g^-1 biomass h^-1) was observed under complete suppression of nitrogen (0; without Glu; non-growing condition) with resultant improved estrogen degradation of about 78% in 168 h by R. palustris strain MDOC01.

Biocathode regulates enrofloxacin degradation by coupling with different co-metabolism conditions

In this study, biocathode system coupled with different co-metabolism conditions (NaAc, glucose and NaHCO₃) were developed to degrade quinolones enrofloxacin (ENR) due to its poorly metabolization, easily accumulation and potential toxicity. Simultaneously, ENR reduction kinetic rate constant in NaAc-fed, glucose-fed and NaHCO₃-fed biocathodes, and sole biocathode were increased by 343.62%, 320.46%, 189.19% and 130.88% when compared with that of abiotic cathode when the operational time and ENR concentration were set to 48 h and 25 mg/L. In addition, transformation pathways of ENR revealed pathway II were dominantly occurred in NaAc- and glucose-fed biocathode while pathway IV acting as key metabolic process were shown in NaHCO₃-fed biocathode. Moreover, 16S rRNA high-throughput sequencing analysis indicated that biocathodic communities were sensitive to switch-over of carbon source, namely Delftia and Bosea as organohalide-respiring bacteria (OHRB) were abundant in NaAc- and glucose-fed biocathodes while Mesotoga and Syntrophorhabdus that responsible for benzoyl-CoA metabolic process were enriched in NaHCO₃-fed biocathode. Overall, this study could unravel the underlying relationship between biocathode degradation pattern of ENR and different co-metabolism conditions, and further offer valuable scientific information on treating refractory quinolones antibiotics via green bioelectrochemical method.

Application of Microbial Fuel Cell (MFC) for Pharmaceutical Wastewater Treatment: An Overview and Future Perspectives

Pharmaceutical wastewater (PWW) is rapidly growing into one of the world’s most serious environmental and public health issues. Existing wastewater treatment systems carry numerous loopholes in supplying the ever-increasing need for potable water resulting from rises in population, urbanization, and industrial growth, and the volume of wastewater produced is growing each day. At present, conventional treatment methods, such as coagulation, sedimentation, oxidation, membrane filtration, flocculation, etc., are used to treat PWW. In contrast to these, the application of microbial fuel cells (MFCs) for decontaminating PWW can be a promising technology to replace these methods. MFC technologies have become a trending research topic in recent times. MFCs have also garnered the interest of researchers worldwide as a promising environmental remediation technique. This review extensively discusses the flaws in standalone conventional processes and the integration of MFCs to enhance electricity production and contaminant removal rates, especially with respect to PWW. This article also summarizes the studies reported on various antibiotics and wastes from pharmaceutical industries treated by MFCs, and their efficiencies. Furthermore, the review explains why further research is needed to establish the actual efficiency of MFCs to achieve sustainable, environmentally friendly, and cost-effective wastewater treatment. A brief on technoeconomic impacts has also been made to provide a glimpse of the way these technologies might replace present-day conventional methods.

Construction of a C-decorated and Cu-doped (Fe,Cu)S/CuFe2O4 solid solution for photo-Fenton degradation of hydrophobic organic contaminant: Enhanced electron transfer and adsorption capacity

To effectively treat the hydrophobic organic contaminant and utilize an industrial solid waste manganese residue (MR), a novel starch-derived carbon (SC)-decorated and Cu-doped (Fe,Cu)S/CuFe₂O₄ solid solution (CFS/CFO@SC) was prepared from MR via mechanical activation treatment of precursor materials followed by one-step pyrolysis and applied as a photo-Fenton catalyst to treat a hydrophobic organic compound, 17α-ethinylestradiol (EE2). Characterization results showed that the CFS/CFO@SC solid solution with unique crystal and electronic structures exhibited high adsorption capacity and catalytic activity, ascribed to that Cu doping and C decorating enhanced its hydrophobicity and BET surface area. The CFS/CFO@SC showed excellent degradation efficiency with nearly 100% of EE2 removal rate in 40 min (degradation rate constant of 0.112 min^-1), and a high mineralization degree with 95.2% of TOC removal in 180 min. This could be ascribed to that C decorating and the formation of CFS/CFO solid solution promoted the charge transfer in a continuous band, resulting in effective separation of photogenerated holes-electrons (h⁺-e^-). The strong interaction of Fe-Cu collaborating with the photoelectron could effectively accelerate the recycle of Fe³⁺/Fe²⁺ and Cu²⁺/Cu⁺, thus generating more active radicals. Moreover, CFS/CFO@SC showed promising stability and recyclability with the EE2 removal rates all >95% after five cycles. This work brings a valuable approach for the rational design of high-performance Fe-based photo-Fenton catalysts for environmental remediation and the valorization of MR.

Biodegradation of synthetic estrogen using bioelectrochemical system and degradation pathway analysis through Quadrupole-time-of-flight-mass spectrometry

Synthetic estrogenic compounds such as 17α-ethinylestradiol (EE2) are significant environmental contaminants. This research studied the biodegradation of EE2 utilizing the EE2 adapted cells isolated from a dairy farm waste site in suspension flask vis-a-vis Bioelectrochemical System (BES) and compared the power output in the BES with and without EE2 as a co-substrate. 78% removal of EE2 was observed in the BES as against 60% removal in suspension flasks. The maximum power density in the BES increased about 53% when EE2 is used as a co-substrate. The EE2 biodegradation studied using HPLC and Q-TOF methods, also proposes a hypothetical pathway for EE2 degradation by the newly isolated strain Rhodopseudomonas palustris MDOC01 and reports the significant metabolites like nicotinic acid and oxoproline being detected during bioelectrochemical treatment process of EE2. Study also suggests that Plasma peroxide treatment of anode material enhanced the overall performance in terms of biodegradation efficiency and power output.

Synergistic degradation for o-chlorophenol and enhancement of power generation by a coupled photocatalytic-microbial fuel cell system

A hierarchically photocatalytic microbial fuel cell system (PMFC) coupled with TiO₂ photoanode and bioanode was established to enhance the power generation based on single-chamber MFC. Compared with the conventional anaerobic mode, oxygen in the solution could be utilized by the photoanode of PMFC to improve the removal of o-chlorophenol (2-CP). The maximum power densities were increasing from 261 (MFC) to 301 mW/m² (PMFC). The removal efficiency of 2-CP (5 mg/L) in PMFC was 76.20% and higher than that in MFC (19.33%) and by photocatalysis (49.23%). The electron-hole separation efficiencies were decreasing with the increasing of dissolved oxygen, causing a low efficiency of photocatalysis, due to the reduction of the current density of the systems. The abundance of Geobacter sp., PHOS-HE36 fam., and Pseudomonas sp. was increased with illumination, contributing to improve the electricity production and 2-CP degradation. The only detective intermediate of 1,2-dichlorobenzene in PMFC indicated that the microbes could regulate the degradation pathway of 2-CP in the coupling system. These findings provided an feasible method for the effective degradation of refractory organic compounds and simultaneous energy recovery by combining photocatalysis and microbial power generation.

Microbial processing of autochthonous organic matter controls the biodegradation of 17α-ethinylestradiol in lake sediments under anoxic conditions

The decay of algal biomass and aquatic plants in freshwater lakes leads to the overproduction of autochthonous organic matter (OM) and the exhaustion of dissolved oxygen, impacting the microbial community and subsequent biodegradation of emerging contaminants in sediment. This study explored how the microbial processing of aquatic plant- and algal-derived OM (POM and AOM) mediates 17α-ethinylestradiol (EE2) biodegradation in the anoxic sediments of Lake Taihu in China. In four months of microcosm incubations, the increased concentrations of protein-like substances in AOM and POM exhibited temporary activation on microbial metabolic enzyme activity (fluorescein diacetate hydrolase and dehydrogenase) and significantly promoted the carbon mineralization with iron reduction (P < 0.001). These in turn increased the EE2 biodegradation efficiency to 77-90 ng g^-1 in the anoxic sediment. However, a higher EE2 biodegradation of 109 ng g^-1 was achieved with the humic acid augmentation containing more quinone-like compounds, showing a weaker substrate-priming effect but accelerated redox cycling of iron and organic substrates in the later period of incubation. The microbial analysis further revealed that the quinone-like compounds in OM were more closely associated with microbial electron transfer and strengthened their interspecies syntrophic cooperation favorable to contaminant biodegradation, even though the connective members exposed to protein-like components upregulated more functional genes related to organic carbon and xenobiotics metabolism and biodegradation. Our findings will help predict the fate of estrogens in various sedimentary environments under increasing eutrophication and further climate change scenarios.

Biodegradation of pharmaceuticals in photobioreactors - a systematic literature review

This work is a systematic review that reports state-of-the-art in removal of pharmaceuticals from water and wastewater by photosynthetic organisms in photobioreactors. The PRISMA protocol-based review of the most recent literature data from the last 10 years (2011–2021) was reported. Articles were searched by the combination of the following keywords: photobioreactor, pharmaceuticals, drugs, hormones, antibiotics, biodegradation, removal, wastewater treatment. The review focuses on original research papers (not reviews), collected in 3 scientific databases: Scopus, Web of Knowledge, PubMed. The review considered the following factors: type of microorganisms, type of micropollutants removed, degradation efficiency and associated products, types of photosynthetic organisms and photobioreactor types. The conclusion from the systematic review is that the main factors that limit widespread pharmaceuticals removal in photobioreactors are high costs and the problem of low efficiency related with low concentrations of pharmaceuticals. The review indicated a need for further research in this area due to increasing amounts of metabolites in the food chain, such as p-aminophenol and estrone, which can cause harm to people and ichthyofauna. Pharmaceuticals removal can be improved by adapting the type of microorganism used to the type of contamination and implementing photoperiods, which increase the removal efficiency of e.g. sulfamethazine by up to 28%. In the future, it is necessary to search for new solutions in terms of the construction of photobioreactors, as well as for more effective species in terms of pharmaceuticals biodegradation that can survive the competition with other strains during water and wastewater treatment.

Bio-electrochemical frameworks governing microbial fuel cell performance: technical bottlenecks and proposed solutions

Microbial fuel cells (MFCs) are recognized as a future technology with a unique ability to exploit metabolic activities of living microorganisms for simultaneous conversion of chemical energy into electrical energy. This technology holds the promise to offer sustained innovations and continuous development towards many different applications and value-added production that extends beyond electricity generation, such as water desalination, wastewater treatment, heavy metal removal, bio-hydrogen production, volatile fatty acid production and biosensors. Despite these advantages, MFCs still face technical challenges in terms of low power and current density, limiting their use to powering only small-scale devices. Description of some of these challenges and their proposed solutions is demanded if MFCs are applied on a large or commercial scale. On the other hand, the slow oxygen reduction process (ORR) in the cathodic compartment is a major roadblock in the commercialization of fuel cells for energy conversion. Thus, the scope of this review article addresses the main technical challenges of MFC operation and provides different practical approaches based on different attempts reported over the years.

Sustainable operation requires addressing key MFC-bottleneck issues. Enhancing extracellular electron transfer is the key to elevated MFC performance.

Investigating and modelling the effect of light intensity on Rhodopseudomonas palustris growth

Photosynthetic bacteria can be useful biotechnological tools - they produce a variety of valuable products, including high purity hydrogen, and can simultaneously treat recalcitrant wastewaters. However, while photobioreactors have been designed and modelled for photosynthetic algae and cyanobacteria, there has been less work on understanding the effect of light in photosynthetic bacterial fermentations. In order to design photobioreactors, and processes using these organisms, robust models of light penetration, utilisation and conversion are needed. This article uses experimental data from a tubular photobioreactor designed to focus in on light intensity effects, to model the effect of light intensity on the growth of Rhodopseudomonas palustris, a model photosynthetic bacterium. The work demonstrates that growth is controlled by light intensity, and that this organism does experience photolimitation below 200 W/m2 and photoinhibition above 600 W/m2. This has implications for outdoor applications, as there will be low growth during the periods of limited light, and growth may be inhibited during the light intensive hours of mid-day. Further, the work presents a model for light penetration in cylindrical photobioreactors, which tends to be the most common geometry. The model developed showed good fit to the experimental data for each light intensity investigated, with high R2 values and NRMSE values all below 20%. The work extends the modelling tools for these organisms, and will allow for better photobioreactor design, and the integration of modelling tools in designing processes which use photosynthetic bacteria. This article is protected by copyright. All rights reserved.

Role of bioelectrochemical systems for the remediation of emerging contaminants from wastewater: A review

Bioelectrochemical systems (BESs) are a unique group of wastewater remediating technology that possesses the added advantage of valuable recovery with concomitant wastewater treatment. Moreover, due to the application of robust microbial biocatalysts in BESs, effective removal of emerging contaminants (ECs) can be accomplished in these BESs. Thus, this review emphasizes the recent demonstrations pertaining to the removal of complex organic pollutants of emerging concern present in wastewater through BES. Owing to the recalcitrant nature of these pollutants, they are not effectively removed through conventional wastewater treatment systems and thereby are discharged into the environment without proper treatment. Application of BES in terms of ECs removal and degradation mechanism along with valuables that can be recovered are discussed. Moreover, the factors affecting the performance of BES, like biocatalyst, substrate, salinity, and applied potential are also summarized. In addition, the present review also elucidates the occurrence and toxic nature of ECs as well as future recommendations pertaining to the commercialization of this BES technology for the removal of ECs from wastewater. Therefore, the present review intends to aid the researchers in developing more efficient BESs for the removal of ECs from wastewater.