Nickel in soil and water: Sources, biogeochemistry, and remediation using biochar

Ecological impacts and potential hazards of nickel on soil microbes, plants, and human health

Nickel (Ni) contamination poses a serious environmental concern, particularly in developing countries: where, anthropogenic activities significantly contributes to Ni accumulations in soils and waters. The contamination of agricultural soils with Ni, increases risks of its entry to terrestrial ecosystems and food production systems posing a threat to both food security and safety. We examined the existing published articles regarding the origin, source, accumulation, and transport of Ni in soil environments. Particularly, we reviewed the bioavailability and toxic effects of Ni to soil invertebrates and microbes, as well as its impact on soil-plant interactions including seed germination, nutrient uptake, photosynthesis, oxidative stress, antioxidant enzyme activity, and biomass production. Moreover, it underscores the potential health hazards associated with consuming crops cultivated in Ni-contaminated soils and elucidates the pathways through which Ni enters the food chain. The published literature suggests that chronic Ni exposure may have long-term implications for the food supply chain and the health of the public. Therefore, an aggressive effort is required for interdisciplinary collaboration for assessing and mitigating the ecological and health risks associated with Ni contamination. It also argues that these measures are necessary in light of the increasing level of Ni pollution in soil ecosystems and the potential impacts on public health and the environment.

Review of soil environment quality in India near coal mining regions: current and future predictions

Production and utilization of coal are one of the primary routes of accumulation of Toxic Elements (TEs) in the soil. The exploration of trends in the accumulation of TEs is essential to establishing a soil pollution strategy, implementing cost-effective remediation, and early warnings of ecological risks. This study provides a comprehensive review of soil concentrations and future accumulation trends of various TEs (Cr, Ni, Pb, Co, Cu, Cd, Zn, Fe, Mn, and As) in Indian coal mines. The findings revealed that average concentrations of Cr, Mn, Ni, Cu, Zn, Pb, and Co surpass India's natural background soil levels by factors of 2, 4.05, 5.32, 1.77, 9.6, and 6.15, respectively. Geo-accumulation index values revealed that 27.3%, 14.3%, and 7.7% of coal mines are heavily polluted by Ni, Co, and Cu, respectively. Also, the Potential Ecological Risk Index indicates that Cd and Ni are primary contaminants in coal mines. Besides, the health risk assessment reveals oral ingestion as the main exposure route for soil TMs. Children exhibit a higher hazard index than adults, with Pb and Cr being major contributors to their non-carcinogenic risk. In addition, carcinogenic risks exist for females and children, with Cr and Cu as primary contributors. Multivariate statistical analysis revealed that TEs (except Cd) accumulated in the soil from anthropogenic sources. The assessment of future accumulation trends in soil TE concentrations reveals dynamic increases that significantly impact both the ecology and humans at elevated levels. This study signifies a substantial improvement in soil quality and risk management in mining regions.

Nickel sources affect soil biological properties but do not affect sorghum growth

Nickel (Ni) is an essential element, but it can be phytotoxic in high concentration, which may be caused by high availability in soil solution. The objective of this study was to evaluate the effect of sources and doses of Ni applied to a dystrophic Red Latosol cultivated with sorghum on i) the availability of the metal in the soil; ii) the impact on biological and biochemical properties of the soil; iii) the absorption and distribution in sorghum plants; and iv) crop productivity. The experiment was carried out within a completely randomized design with two nickel sources [nickel(II) nitrate, Ni(NO3)2 and nickel(III) oxide, Ni2O3], three doses (35, 70, and 140 mg Ni kg-1 soil), plus controls without Ni, with 3 replications. The concentrations of Ni in the soil, soil microbial biomass (SMB), basal soil respiration (BSR), metabolic quotient (qCO2), fluorescein diacetate (FDA) hydrolysis, and urease activity were determined. The concentrations of Ni in the leaf diagnostic and in the plant (shoot, root, and grains) were also measured. In the soil, the concentrations of available Ni remained between 0.21 and 54.01 mg Ni kg-1. Ni2O3 contributed very little to the increase in available Ni. SMB and the FDA hydrolysis were not affected by the Ni source or Ni dose, but BSR and qCO2 had significant increase with Ni application rates, suggesting the soil microorganisms faced stress. Soil urease activity was affected by Ni dose but not by Ni source. The dose of Ni as Ni(NO3)2 decreased the metal concentration in the plant, while that of Ni2O3 increased it. Nickel source did not affect dry mass production of the plants, but grain yield was affected in a dose-dependent manner when Ni2O3 was the source of Ni.

Physiological and biochemical responses of Leersia hexandra Swartz to nickel stress: Insights into antioxidant defense mechanisms and metal detoxification strategies

Phytoremediation is widely considered as a cost-effective method for managing heavy metal soil pollution. Leersia hexandra Swartz shows a promising potential for the remediation of heavy metals pollution, including chromium (Cr), copper (Cu), and nickel (Ni). It is vital to understand the physiological and biochemical responses of L. hexandra to Ni stress to elucidate the mechanisms underlying Ni tolerance and accumulation. Here, we examined the metabolic and transcriptomic responses of L. hexandra exposed to 40 mg/L Ni for 24 h and 14 d. After 24-h Ni stress, gene expression of glutathione metabolic cycle (GSTF1, GSTU1 and MDAR4) and superoxide dismutase (SODCC2) was significantly increased in plant leaves. Furthermore, after 14-d Ni stress, the ascorbate peroxidase (APX7), superoxide dismutase (SODCP and SOD1), and catalase (CAT) gene expression was significantly upregulated, but that of glutathione metabolic cycle (EMB2360, GSTU1, GSTU6, GSH2, GPX6, and MDAR2) was downregulated. After 24-h Ni stress, the differentially expressed metabolites (DEMs) were mainly flavonoids (45%) and flavones (20%). However, after 14-d Ni stress, the DEMs were mainly carbohydrates and their derivatives (34%), amino acids and derivatives (15%), and organic acids and derivatives (8%). Results suggest that L. hexandra adopt distinct time-dependent antioxidant and metal detoxification strategies likely associated with intracellular reduction-oxidation balance. Novel insights into the molecular mechanisms responsible for Ni tolerance in plants are presented.

Optimizing the development of contaminated land in China: Exploring machine-learning to identify risk markers

Often available for use, previously developed land, which includes residential and commercial/industrial areas, presents a significant challenge due to the risk to human health. China's 2018 release of health risk assessment standards for land reuse aimed to bridge this gap in soil quality standards. Despite this, the absence of representative indicators strains risk managers economically and operationally. We improved China's land redevelopment approach by leveraging a dataset of 297,275 soil samples from 352 contaminated sites, employing machine learning. Our method incorporating soil quality standards from seven countries to discern patterns for establishing a cost-effective evaluative framework. Our research findings demonstrated that detection costs could be curtailed by 60% while maintaining consistency with international soil standards (prediction accuracy = 90-98%). Our findings deepen insights into soil pollution, proposing a more efficient risk assessment system for land redevelopment, addressing the current dearth of expertise in evaluating land development in China.

Highly efficient Ni(II) adsorption by industrial lignin-based biochar: a pivotal role of dissolved substances within biochar

In the context of carbon neutrality, promoting resource utilization of industrial alkali lignin addressing heavy metal pollution is crucial for China's pollution alleviation and carbon reduction. Microwave pyrolysis produced functionalized biochar from industrial alkali lignin for Ni(II) adsorption. LB400 achieved 343.15 mg g-1 saturated adsorption capacity in 30 min. Pseudo-second-order kinetic and Temkin isotherm models accurately described the adsorption, which was endothermic and spontaneous (ΔGϴ < 0, ΔHϴ > 0). Quantitative analysis revealed that both dissolved substances and carbon skeleton from biochar contributed to adsorption, with the former predominates (93.76%), including mineral precipitation NiCO3 (Qp) and adsorption of dissolved organic matter (QDOM). Surface complexation (Qc) and ion exchange (Qi) on the carbon skeleton accounted for 6.3%. Higher biochar preparation temperature reduced Ni(II) adsorption by dissolved substances. Overall, biochar which comes from the advantageous disposal of industrial lignin effectively removes Ni(II) contamination, encouraging ecologically sound treatment of heavy metal pollution and sustainable resource utilization.

Environmental health risk assessment and source apportion of heavy metals using chemometrics and pollution indices in the upper Yamuna river basin, India

River Yamuna is the largest tributary of the Ganges with great economic importance, and provides water for about 57 million people and accounts for more than 70% of Delhi's water supply. Various pollution indices and chemometric methods were used to investigate heavy metal pollution, associated risks, and probable sources in the upper Yamuna river water. A total of 56 river water samples, 28 each in pre and post-monsoon season were collected and analysed for 15 heavy metals. The findings reveal that Al (38.66 ± 21.14 μg/L), As (16.52 ± 15.81 μg/L), and Mn (41.06 ± 89.25 μg/L) in pre-monsoon and Al (45.77 ± 29.46 μg/L), As (10.30 ± 12.15 μg/L), Fe (48.03 ± 81.11 μg/L), and Mn (31.02 ± 70.13 μg/L) in post-monsoon exceeded the Bureau of Indian Standards (BIS) acceptable limits. The pollution indices (HPI, NPI, HEI, and Cd) indicate that most locations are low to moderately polluted, except for the lower catchment. Health indices, i.e., hazard Index (HI) and incremental lifetime cancer risk (ILCR), suggest that the prolonged consumption of river water may cause potential human health hazards. In contrast, the water is suitable for domestic and other uses as the dermal risk is less prominent. The ecological risk index (ERI) of pre (0.22-58.75) and post-monsoon (0.12-44.21) were in the low-risk category (<110), indicating no ecological risk associated with heavy metals. In pre and post-monsoon, four principal components (PCs) described 73.97% and 76.18% of the total variance respectively, suggesting the mixed impact of numerous geogenic and anthropogenic sources in the region's water chemistry. Cluster analysis demonstrates that the lower catchment samples (National Capital Region, Delhi) significantly vary from each other due to wastewater discharge, industrialisation, and rapid urbanization, while the upper and mid-catchment samples are less distinct. Hence, more than 90% of the Yamuna water is extracted from the upper region; present findings may aid in developing an effective catchment scale management strategy.

Nickel induces blood-testis barrier damage through ROS-mediated p38 MAPK pathways in mice

Nickel (Ni) is an essential common environmental contaminant, it is hazardous to male reproduction, but the precise mechanisms are still unknown. Blood-testis barrier (BTB), an important testicular structure consisting of connections between sertoli cells, is the target of reproductive toxicity caused by many environmental toxins. In this study, ultrastructure observation and BTB integrity assay results indicated that NiCl2 induced BTB damage. Meanwhile, BTB-related proteins including the tight junction (TJ), adhesion junction (AJ) and the gap junction (GJ) protein expression in mouse testes as well as in sertoli cells (TM4) were significantly decreased after NiCl2 treatment. Next, the antioxidant N-acetylcysteine (NAC) was co-treated with NiCl2 to study the function of oxidative stress in NiCl2-mediated BTB deterioration. The results showed that NAC attenuated testicular histopathological damage, and the expression of BTB-related proteins were markedly reversed by NAC co-treatment in vitro and vivo. Otherwise, NiCl2 activated the p38 MAPK signaling pathway. And, NAC co-treatment could significantly inhibit p38 activation induced by NiCl2 in TM4 cells. Furthermore, in order to confirm the role of the p38 MAPK signaling pathway in NiCl2-induced BTB impairment, a p38 inhibitor (SB203580) was co-treated with NiCl2 in TM4 cells, and p38 MAPK signaling inhibition significantly restored BTB damage induced by NiCl2 in TM4 cells. These results suggest that NiCl2 treatment destroys the BTB, in which the oxidative stress-mediated p38 MAPK signaling pathway plays a vital role.

DNA fragmentation, chromosomal aberrations, and multi-toxic effects induced by nickel and the modulation of Ni-induced damage by pomegranate seed extract in Allium cepa L

This study was designed to assess the recovery effect of pomegranate seed extract (PSEx) against nickel (Ni)-induced damage in Allium cepa. Except for the control group treated with tap water, five experimental groups were exposed to 265 mg L-1 PSEx, 530 mg L-1 PSEx, 1 mg L-1 NiCI2, 265 mg L-1 PSEx + 1 mg L-1 NiCI2, and 530 mg L-1 PSEx + 1 mg L-1 NiCI2, respectively. The toxicity of Ni was examined through the analysis of physiological (germination percentage, weight gain, and root length), cytotoxicity (mitotic index), genotoxicity (micronucleus, chromosomal anomalies, and Comet test), and biochemical (malondialdehyde, proline, chlorophyll a and chlorophyll b contents, the activities of superoxide dismutase and catalase) parameters. Meristematic cell defects were also investigated. The NiCl2-DNA interaction was evaluated through spectral shift analysis. Values of all physiological parameters, mitotic index scores, and chlorophyll contents decreased while micronucleus frequency, DNA tail percentage, chromosomal anomalies, proline, MDA, and enzyme activities increased following Ni administration. According to the tail DNA percentage scale, Ni application caused "high damage" to DNA. Ni-induced chromosomal anomalies were fragment, sticky chromosome, vagrant chromosome, bridge, unbalanced chromatin distribution, reverse polarization, and nucleus with bud. NiCl2-DNA interaction caused a hyperchromic shift in the UV/Vis spectrum of DNA by spectral profile analysis. Ni exposure impaired root meristems as evidenced by the formation of epidermis cell damage, flattened cell nucleus, thickened cortex cell wall, and blurry vascular tissue. Substantial recovery was seen in all parameters with the co-administration of PSEx and Ni. Recovery effects in the parameters were 18-51% and 41-84% in the 265 mg L-1 PSEx + 1 mg L-1 NiCI2 and 530 mg L-1 PSEx + 1 mg L-1 NiCI2 groups, respectively. The Comet scale showed that PSEx applied with Ni reduced DNA damage from "high" to "moderate." Ni-induced thickened cortex cell wall and blurry vascular tissue damage disappeared completely when 530 mg L-1 PSEx was mixed with Ni. PSEx successfully reduced the negative effects of Ni, which can be attributed to its content of antioxidants and bioactive ingredients.

Innovative Low-Cost Composite Nanoadsorbents Based on Eggshell Waste for Nickel Removal from Aqueous Media

In a contemporary sustainable economy, innovation is a prerequisite to recycling waste into new efficient materials designed to minimize pollution and conserve non-renewable natural resources. Using an innovative approach to remediating metal-polluted water, in this study, eggshell waste was used to prepare two new low-cost nanoadsorbents for the retrieval of nickel from aqueous solutions. Scanning electron microscopy (SEM) results show that in the first eggshell-zeolite (EZ) adsorbent, the zeolite nanoparticles were loaded in the eggshell pores. The preparation for the second (iron(III) oxide-hydroxide)-eggshell-zeolite (FEZ) nanoadsorbent led to double functionalization of the eggshell base with the zeolite nanoparticles, upon simultaneous loading of the pores of the eggshell and zeolite surface with FeOOH particles. Structural modification of the eggshell led to a significant increase in the specific surface, as confirmed using BET analysis. These features enabled the composite EZ and FEZ to remove nickel from aqueous solutions with high performance and adsorption capacities of 321.1 mg/g and 287.9 mg/g, respectively. The results indicate that nickel adsorption on EZ and FEZ is a multimolecular layer, spontaneous, and endothermic process. Concomitantly, the desorption results reflect the high reusability of these two nanomaterials, collectively suggesting the use of waste in the design of new, low-cost, and highly efficient composite nanoadsorbents for environmental bioremediation.

High-Efficiency Removal of Lead and Nickel Using Four Inert Dry Biomasses: Insights into the Adsorption Mechanisms

In this study, inert dry bioadsorbents prepared from corn cob residues (CCR), cocoa husk (CH), plantain peels (PP), and cassava peels (CP) were used as adsorbents of heavy metal ions (Pb²⁺ and Ni²⁺) in single-batch adsorption experiments from synthetic aqueous solutions. The physicochemical properties of the bioadsorbents and the adsorption mechanisms were evaluated using different experimental techniques. The results showed that electrostatic attraction, cation exchange, and surface complexation were the main mechanisms involved in the adsorption of metals onto the evaluated bioadsorbents. The percentage removal of Pb²⁺ and Ni²⁺ increased with higher adsorbent dosage, with Pb²⁺ exhibiting greater biosorption capacity than Ni²⁺. The bioadsorbents showed promising potential for adsorbing Pb²⁺ with monolayer adsorption capacities of 699.267, 568.794, 101.535, and 116.820 mg/g when using PP, CCR, CH, and CP, respectively. For Ni²⁺, Langmuir's parameter had values of 10.402, 26.984, 18.883, and 21.615, respectively, for PP, CCR, CH, and CP. Kinetics data fitted by the pseudo-second-order model revealed that the adsorption rate follows this order: CH > CP > CCR > PP for Pb²⁺, and CH > CCR > PP > CP for Ni²⁺. The adsorption mechanism was found to be controlled by ion exchange and precipitation. These findings suggest that the dry raw biomasses of corn cob residues, cocoa husk, cassava, and plantain peels can effectively remove lead and nickel, but further research is needed to explore their application in industrial-scale and continuous systems.

Nickel (Ni) phytotoxicity and detoxification mechanisms: A review

Scientists studying the environment, physiology, and biology have been particularly interested in nickel (Ni) because of its dual effects (essentiality and toxicity) on terrestrial biota. It has been reported in some studies that without an adequate supply of Ni, plants are unable to finish their life cycle. The safest Ni limit for plants is 1.5 μg g^-1, while the limit for soil is between 75 and 150 μg g^-1. Ni at lethal levels harms plants by interfering with a variety of physiological functions, including enzyme activity, root development, photosynthesis, and mineral uptake. This review focuses on the occurrence and phytotoxicity of Ni with respect to growth, physiological and biochemical aspects. It also delves into advanced Ni detoxification mechanisms such as cellular modifications, organic acids, and chelation of Ni by plant roots, and emphasizes the role of genes involved in Ni detoxification. The discussion has been carried out on the current state of using soil amendments and plant-microbe interactions to successfully remediate Ni from contaminated sites. This review has identified potential drawbacks and difficulties of various strategies for Ni remediation, discussed the importance of these findings for environmental authorities and decision-makers, and concluded by noting the sustainability concerns and future research needs regarding Ni remediation.

Simultaneous removal of ammonia nitrogen, recovery of phosphate, and immobilization of nickel in a polyester fiber with shell powder and iron carbon spheres bioreactor: Optimization and pathways mechanism

Composite pollutants are prevalent in wastewater, whereas, the simultaneous accomplishment of efficient nitrogen removal and resources recovery remains a challenge. In this study, a bioreactor was constructed to contain Pseudomonas sp. Y1 using polyester fiber wrapped with shell powder and iron carbon spheres, achieving ammonia nitrogen (NH₄⁺-N) removal, phosphate (PO₄^3--P) recovery, and nickel (Ni²⁺) immobilization. The optimal performance of bioreactor was average removal efficiencies of NH₄⁺-N, PO₄^3--P, calcium (Ca²⁺), and Ni²⁺ as 82.42, 96.67, 76.13, and 98.29% at a hydraulic retention time (HRT) of 6 h, pH of 7.0, and influent Ca²⁺ and Ni²⁺ concentrations of 100.0 and 3.0 mg L^-1, respectively. The bioreactor could remove PO₄^3--P, Ca²⁺, and Ni²⁺ by biomineralization, co-precipitation, adsorption, and lattice substitution. Moreover, microbial community analysis suggested that Pseudomonas was the predominant genus and had possessed tolerance to Ni²⁺ toxicity in wastewater. This study presented an effective method to synchronously remove NH₄⁺-N, recover PO₄^3--P, and fix heavy metals through microbially induced carbonate precipitation (MICP) and heterotrophic nitrification and aerobic denitrification (HNAD) technology.

Comparative efficacy of Parthenium hysterophorus (L.) derived biochar and iron doped zinc oxide nanoparticle on heavy metals (HMs) mobility and its uptake by Triticum aestivum (L.) in chromite mining contaminated soils

In this study we investigated the efficacy of a novel material parthenium weed (Parthenium hysterophorus L.) biochar (PBC), iron doped zinc oxide nanoparticles (nFe-ZnO), and biochar modified with nFe-ZnO (Fe-ZnO@BC) to adsorb heavy metals (HMs) and reduce their uptake by wheat (Triticum aestivum L.) in a highly chromite mining contaminated soil. The co-application of the applied soil conditioners exhibited a positive effect on the immobilization and restricted the HMs uptake below their threshold levels in shoot content of wheat. The maximum adsorption capacity was because of large surface area, cation exchange capacity, surface precipitation, and complexation of the soil conditioners. The scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS) showed porous smooth structure of parthenium weed derived biochar that helped in HMs adsorption, increase the efficiency of soil fertilizers and nutrients retention which help in the enhancement soil condition. Under different application rates the highest translocation factor (TFHMs) was obtained at 2 g nFe-ZnO rate followed the descending order: Mn > Cr > Cu > Ni > Pb. The overall TFHMs was found <1.0 indicating that low content of HMs accumulation in roots from soil slight transferred to shoot, thus satisfying the remediation requirements.

Adsorption of potentially harmful elements by metal-biochar prepared via Co-pyrolysis of coffee grounds and Nano Fe(III) oxides

Nano Fe(III) oxide (FO) was used as an amendment material in CO₂-assisted pyrolysis of spent coffee grounds (SCG) and its impacts on the syngas (H₂ & CO) generation and biochar adsorptive properties were investigated. Amendment of FO led to 153 and 682% increase of H₂ and CO in pyrolytic process of SCG, respectively, which is deemed to arise from enhanced thermal cracking of hydrocarbons and oxygen transfer reaction mediated by FO. Incorporation of FO successfully created porous structure in the produced biochar. The adsorption tests revealed that the biochar exhibited bi-functional capability to remove both positively charged Cd(II) and Ni(II), and negatively charged Sb(V). The adsorption of Cd(II) and Ni(II) was hardly deteriorated in the multiple adsorption cycles, and the adsorption of Sb(V) was further enhanced through formation of surface ternary complexes. The overall results demonstrated nano Fe(III) oxide is a promising amendment material in CO₂-assisted pyrolysis of lignocellulosic biomass for enhancing syngas generation and producing functional biochar.

Synergistic reduction of Cr(VI) by graphite N and thiophene S of N, S-co-doped hydrochar derived from waste straw

An efficient, simple, and inexpensive N, S-co-doped hydrochar (SNHC) was synthesized from waste straw by a one-pot hydrothermal process without calcination for the removal of Cr(VI). SNHC demonstrated excellent adsorption performance for Cr(VI) and high stability, achieving a high capacity of 171.33 mg/g (293 K, pH 2) and a capacity retention of 82.73 % after five cycles. The adsorption behavior was determined as a multilayer adsorption process based on chemisorption according to the simulation the results of Freundlich adsorption isotherms and pseudo-second-order models. The characterization of SNHC revealed that graphite N and thiophene S formed by the material were the effective active sites, functioning as electron donors to contribute a significant amount of electrons to reduce Cr(VI) to Cr(III). Therefore, next to electrostatic adsorption and complexation, the synergistic reduction of Cr(VI) by graphite N and thiophene S was the main mechanism for Cr(VI) removal. Additionally, density functional theory calculations indicated a low adsorption energy of thiophene S, which increased the attractive interaction between SNHC and Cr(VI) and played the most important role in reducing Cr(VI). The mechanism of the effect of graphite N and thiophene S on Cr(VI) removal not only offered a comprehensive perspective on the role of N, S co-doped mediation in hydrochar but also provided the basic theory for its practical application.

Heavy Metal Removal from Aqueous Effluents by TiO2 and ZnO Nanomaterials

The presence of heavy metals in wastewater, such as Ni, Pb, Cd, V, Cr, and Cu, is a serious environmental problem. This kind of inorganic pollutant is not biodegradable for several years, and its harmful effect is cumulative. Recently, semiconductor nanomaterials based on metal oxides have gained interest due to their efficiency in the removal of heavy metals from contaminated water, by inducing photocatalytic ion reduction when they absorb light of the appropriate wavelength. The most commonly applied semiconductor oxides for these purposes are titanium oxide (TiO2), zinc oxide (ZnO), and binary nanomaterials composed of both types of oxides. The main purpose of this work is to critically analyse the existent literature concerning this topic focusing specially in the most important factors affecting the adsorption or photocatalytic capacities of this type of nanomaterials. In particular, photocatalytic activity is altered by various factors, such as proportion of polymorphs, synthesis method, surface area, concentration of defects and particle size, among others. After a survey of the actual literature, it was found that, although these metal oxides have low absorption capacity for visible light, it is possible to obtain an acceptable heavy metal reduction performance by sensitization with dyes, doping with metallic or nonmetallic atoms, introduction of defects, or the coupling of two or more semiconductors.

Recent progresses, challenges, and opportunities of carbon-based materials applied in heavy metal polluted soil remediation

The application of carbon-based materials (CBMs) for heavy metal polluted soil remediation has gained growing interest due to their versatile properties and excellent remediation performance. Although the progresses on applications of CBMs in removing heavy metal from aqueous solution and their corresponding mechanisms were well known, comprehensive review on applications of CBMs in heavy metal polluted soil remediation were less identified. Therefore, this review provided insights into advanced progresses on utilization of typical CBMs including biochar, activated carbon, graphene, graphene oxide, carbon nanotubes, and carbon black for heavy metal polluted soil remediation. The mechanisms of CBM remediation of heavy metals in soil were summarized, mainly including physical adsorption, precipitation, complexation, electrostatic interaction, and cationic-π coordination. The key factors affecting the remediation effect include soil pH, organic matter, minerals, microorganisms, coexisting ions, moisture, and material size. Disadvantages of CBMs were also included, such as: potential health risks, high cost, and difficulty in achieving co-passivation of anions and cations. This work will contribute to our understanding of current research advances, challenges, and opportunities for CBMs remediation of heavy metal-contaminated soils.

Ecological and human health risk assessment of metals in soils and wheat along Sutlej river (India)

Heavy metal (HMs) entry into soil affects the food chain, which is of great worry for human well-being hazards. In order to study the association of HMs in soil-plant system, surface (0-0.15 m) soil and wheat grain samples were collected within five km buffer zone of Sutlej river in Punjab (India). These samples were analysed for total arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), cobalt (Co), iron (Fe), manganese (Mn), nickle (Ni), lead (Pb), and zinc (Zn). Among all the HMs in soil and grain samples, the concentration of total Fe was maximum and As was minimum. The HM contamination of soils was assessed using contamination factor (CF), enrichment factor (EF), potential ecological risk (Er) and modified potential ecological risk (mEr). The CF, EF, Er and mEr were highest for Cd in soils. The bioaccumulation metal factor was highest for Zn and lowest for Ni in wheat grain. There was a significant (p < 0.05) positive relationship between HM concentration in soils and wheat grains indicating the health risk due to consumption of wheat cultivated around the five km buffer of the Sutlej river. The carcinogenic and non-carcinogenic risk due to ingestion of wheat grain were higher from Cd and Pb, respectively. These results are helpful for devising the remediation approaches to decrease the multi-metal contamination in soils and plants, and the epidemiological ways to preclude the human health risk from HM contamination.

A critical review on biochar-assisted free radicals mediated redox reactions influencing transformation of potentially toxic metals: Occurrence, formation, and environmental applications

Potentially toxic metals have become a viable threat to the ecosystem due to their carcinogenic nature. Biochar has gained substantial interest due to its redox-mediated processes and redox-active metals. Biochar has the capacity to directly adsorb the pollutants from contaminated environments through several mechanisms such as coprecipitation, complexation, ion exchange, and electrostatic interaction. Biochar's electron-mediating potential may be influenced by the cyclic transition of surface moieties and conjugated carbon structures. Thus, pyrolysis configuration, biomass material, retention time, oxygen flow, and heating time also affect biochar's redox properties. Generally, reactive oxygen species (ROS) exist as free radicals (FRs) in radical and non-radical forms, i.e., hydroxyl radical, superoxide, nitric oxide, hydrogen peroxide, and singlet oxygen. Heavy metals are involved in the production of FRs during redox-mediated reactions, which may contribute to ROS formation. This review aims to critically evaluate the redox-mediated characteristics of biochar produced from various biomass feedstocks under different pyrolysis conditions. In addition, we assessed the impact of biochar-assisted FRs redox-mediated processes on heavy metal immobilization and mobility. We also revealed new insights into the function of FRs in biochar and its potential uses for environment-friendly remediation and reducing the dependency on fossil-based materials, utilizing local residual biomass as a raw material in terms of sustainability.

Biochar for the removal of contaminants from soil and water: a review

Biochar shows significant potential to serve as a globally applicable material to remediate water and soil owing to the extensive availability of feedstocks and conducive physio-chemical surface characteristics. This review aims to highlight biochar production technologies, characteristics of biochar, and the latest advancements in immobilizing and eliminating heavy metal ions and organic pollutants in soil and water. Pyrolysis temperature, heat transfer rate, residence time, and type of feedstock are critical influential parameters. Biochar’s efficacy in managing contaminants relies on the pore size distribution, surface groups, and ion-exchange capacity. The molecular composition and physical architecture of biochar may be crucial when practically applied to water and soil. In general, biochar produced at relatively high pyrolysis temperatures can effectively manage organic pollutants via increasing surface area, hydrophobicity and microporosity. Biochar generated at lower temperatures is deemed to be more suitable for removing polar organic and inorganic pollutants through oxygen-containing functional groups, precipitation and electrostatic attraction. This review also presents the existing obstacles and future research direction related to biochar-based materials in immobilizing organic contaminants and heavy metal ions in effluents and soil.

Graphical Abstract

N-Doped Biochar from Lignocellulosic Biomass for Preparation of Adsorbent: Characterization, Kinetics and Application

Medulla tetrapanacis is composed of a lignocellulosic biopolymer and has a regular porous structure, which makes it a potential biomass material for preparing porous N-doped biochar. Herewith, N-doped Medulla tetrapanacis biochar (UBC) was successfully prepared by modification with urea and NaHCO₃ under pyrolysis at 700 °C. The nitrogen-containing groups were efficiently introduced into biochar, and the micro-pore structures of the UBC were developed with sizeable specific surface area, which was loaded with massive adsorption sites. The adsorption kinetics and isotherms of the UBC conformed to pseudo-second-order and Langmuir model. The superior adsorption capacities of the UBC for methylene blue (MB) and congo red (CR) were 923.0 mg/g and 728.0 mg/g, and the capacities for Cu²⁺ and Pb²⁺ were 468.5 mg/g and 1466.5 mg/g, respectively. Moreover, the UBC had a stronger affinity for Cr³⁺ and Fe³⁺ in multiple metal ions and retained at a preferable adsorption performance for dyes and heavy metals after five cycles. Precipitation, complexation, and physical adsorption were the main mechanisms of the UBC-adsorbing metal ions and dyes. Thus, lignocellulosic biochar has great potential for removing dyes and heavy metals in aqueous solutions.

Assessing the influence of sewage sludge and derived-biochar in immobilization and transformation of heavy metals in polluted soil: Impact on intracellular free radical formation in maize

As one of the most common ways to get rid of municipal waste, landfill leachate, waste with complicated compositions and high levels of contaminants, has become a significant threat to the world's environment. Here, the impact of sewage sludge (SS) and derived-biochar (SSB) amendments on the immobilization and potential mobility of heavy metals in a contaminated soil-plant system was investigated. The sequential fractionation findings showed that using SS-2%, SSB-2%, and SSBC-1% reduced the potential mobility of heavy metals while increasing the residual fraction in polluted soils. The translocation and bioconcentration factors showed that heavy metals were slightly transferred into shoots from roots and lowered accumulation in roots from contaminated soils. Fourier transform infrared (FTIR) and X-ray photoelectron spectrum (XPS) comprehensive characterization results indicated the significant role of applied amendments for heavy metals transformation from the exchangeable-soluble fractions to the least available form by lowering their mobility to confirm the adsorption-based complexes, which results in the surface adsorption of heavy metals with functional groups. The electron paramagnetic resonance (EPR) results indicated the dominance of reactive oxygen species (ROS) in the intracellular formation of hydroxyl radicals (•OH) in maize plant roots and shoots. ROS (•OH) generation plays a critical influence in the interaction between the physiological processes of plants and heavy metals. Moreover, all the amendments increased maize growth and biomass production. Our study suggests that alone and combined application of SS and SSB have great potential to remediate heavy metals contaminated soil for environmental sustainability.

Impacts of pyrolysis temperatures on physicochemical and structural properties of green waste derived biochars for adsorption of potentially toxic elements

This study comparatively investigated the influence of changes in pyrolysis temperature on the physicochemical, structural, and adsorptive properties of biochars derived from a green waste (Cynodon dactylon L.). For this purpose, the biophysically dried green wastes were pyrolyzed at 400 °C, 600 °C, and 800 °C under the same pyrolysis conditions. The results revealed that the physicochemical and structural properties were varied, depending upon the pyrolysis temperatures. With the increase of pyrolysis temperature, the surface functional groups were escaped, the structure became more porous (pore volume of 0.089 ± 0.001), the metal oxides were remained consistent, and the biochars turned into more alkaline nature (pH of 11.9 ± 0.2). Furthermore, as referring to the adsorptive performance for potentially toxic elements, with experimental adsorption capacity of up to 33.7 mg g^-1 and removal rate up to 96% for a multi-metals containing solution, the biochars pyrolyzed at high temperature (800 °C) was significantly (p < 0.05) higher than those pyrolyzed at low temperature (400 °C). According to the physicochemical and structural properties, and the adsorptive performances of the biochars, the optimal pyrolysis temperature was herein recommended to be 800 °C.

A review of pristine and modified biochar immobilizing typical heavy metals in soil: Applications and challenges

In recent years, the application of biochar in the remediation of heavy metals (HMs) contaminated soil has received tremendous attention globally. We reviewed the latest research on the immobilization of soil HMs by biochar almost in the last 5 years (until 2021). The methods, effects and mechanisms of biochar and modified biochar on the immobilization of typical HMs in soil have been systematically summarized. In general, the HMs contaminating the soil can be categorized into two groups, the oxy-anionic HMs (As and Cr) and the cationic HMs (Pb, Cd, etc.). Reduction and precipitation of oxy-anionic HMs by biochar/modified biochar are the dominant mechanism for reducing HMs toxicity. Pristine biochar can effectively immobilize cationic HMs. The commonly applied modification method is to add substances that can precipitate HMs to the biochar. In addition, we assessed the risks of biochar applications. For instance, biochar may cause the leaching of certain HMs; biochar aging; co-transportation of biochar nanoparticles with HMs. Future work should focus on the artificial/intelligent design of biochar to make it suitable for remediation of multiple HMs contaminated soil.

Biochar-based composites for remediation of polluted wastewater and soil environments: Challenges and prospects

Pharmaceuticals, heavy metals, pesticides, and dyes are the main environmental contaminants that have serious effects on both land and aquatic lives and necessitate the development of effective methods to mitigate these issues. Although some conventional methods are in use to tackle soil contamination, but biochar and biochar-based composites represent a reliable and sustainable means to deal with a spectrum of toxic organic and inorganic pollutants from contaminated environments. The capacity of biochars and derived constructs to remediate inorganic dyes, pesticides, insecticides, heavy metals, and pharmaceuticals from environmental matrices is attributed to their extensive surface area, surface functional groups, pore size distribution, and high sorption capability of these pollutants in water and soil environments. Application conditions, biochar feedstock, pyrolysis conditions and precursor materials are the factors that influence the capacity and functionality of biochar to adsorb pollutants from wastewater and soil. These factors, when improved, can benefit biochar in agrochemical and heavy metal remediation from various environments. However, the processes involved in biochar production and their influence in enhancing pollutant sequestration remain unclear. Therefore, this paper throws light on the current strategies, operational conditions, and sequestration performance of biochar and biochar-based composites for agrochemical and heavy metal in soil and water environments. The main challenges associated with biochar preparation and exploitation, toxicity evaluation, research directions and future prospects for biochar in environmental remediation are also outlined.

A Multi-Medium Analysis of Human Health Risk of Toxic Elements in Rice-Crayfish System: A Case Study from Middle Reach of Yangtze River, China

Rice-crayfish system has been extensively promoted in China in recent years. However, the presence of toxic elements in soil may threaten the quality of agricultural products. In this study, eight toxic elements were determined in multi-medium including soil, rice, and crayfish from the rice-crayfish system (RCS) and conventional rice culture (CRC) area. Crayfish obtained a low level of toxic element content, and mercury (Hg) in rice from RCS showed the highest bioavailability and mobility. Health risk assessment, coupled with Monte Carlo simulation, revealed that the dietary exposure to arsenic (As) and Hg from rice and crayfish consumption was the primary factor for non-carcinogenic risk, while Cd and As were the dominant contributors to the high carcinogenic risk of rice intake for adults and children, respectively. Based on the estimated probability distribution, the probabilities of the total cancer risk (TCR) of rice intake for children from RCS were lower than that from CRC.

Recent development of magnetic biochar crosslinked chitosan on heavy metal removal from wastewater - Modification, application and mechanism

Heavy metal contamination in water bodies is currently in an area of greater concern due to the adverse effects on human health. Despite the good adsorption performance of biochar, various modifications have been performed on the pristine biochar to further enhance its adsorption capability, at the same time overcome the difficulty of particles separation and mitigate the secondary pollution issues. In this review, the feasibility of chitosan-modified magnetic biochar for heavy metal removal from aqueous solution is evaluated by critically analysing existing research. The effective strategies that applied to introduce chitosan and magnetic substances into the biochar matrix are systematically reviewed. The physicochemical changes of the modified-biochar composite are expounded in terms of surface morphology, pore properties, specific surface area, surface functional groups and electromagnetism. The detailed information regarding the adsorption performances of various modified biochar towards different heavy metals and their respective underlying mechanisms are studied in-depth. The current review also analyses the kinetic and isotherm models that dominated the adsorption process and summarizes the common models that fitted well to most of the experimental adsorption data. Moreover, the operating parameters that affect the adsorption process which include solution pH, temperature, initial metal concentration, adsorbent dosage, contact time and the effect of interfering ions are explored. This review also outlines the stability of modified biochar and their regeneration rate after cycles of heavy metal removal process. Lastly, constructive suggestions on the future trends and directions are provided for better research and development of chitosan-modified magnetic biochar.

Physiological Adaptation of Three Wild Halophytic Suaeda Species: Salt Tolerance Strategies and Metal Accumulation Capacity

Understanding salt tolerance mechanisms in halophytes is critical for improving the world's agriculture under climate change scenarios. Herein, the physiological and metabolic responses of Suaeda monoica, Suaeda vermiculata, and Suaeda schimperi against abiotic stress in their natural saline environment on the east coast of the Red Sea were investigated. The tested species are exposed to different levels of salinity along with elemental disorders, including deficiency in essential nutrients (N&P in particular) and/or elevated levels of potentially toxic elements. The tested species employed common and species-specific tolerance mechanisms that are driven by the level of salinity and the genetic constitution of Suaeda species. These mechanisms include: (i) utilization of inorganic elements as cheap osmotica (Na+ in particular), (ii) lowering C/N ratio (S. monoica and S. schimperi) that benefits growth priority, (iii) efficient utilization of low soil N (S. vermiculata) that ensures survival priority, (v) biosynthesis of betacyanin (S. schimperi and S. vermiculata) and (vi) downregulation of overall metabolism (S. vermiculata) to avoid oxidative stress. Based on their cellular metal accumulation, S. monoica is an efficient phytoextractor of Cr, Co, Cu, Ni, and Zn, whereas S. vermiculata is a hyper-accumulator of Hg and Pb. S. schimperi is an effective phytoextractor of Fe, Hg, and Cr. These results highlight the significance of Suaeda species as a promising model halophyte and as phytoremediators of their hostile environments.

Manganese oxide-modified biochar: production, characterization and applications for the removal of pollutants from aqueous environments - a review

The development of manganese (Mn) oxides (MnOx) modified biochar (MnOBC) for the removal of pollutants from water has received significant attention. However, a comprehensive review focusing on the use of MnOBC for the removal of organic and inorganic pollutants from water is missing. Therefore, the preparation and characterization of MnOBC, and its capacity for the removal of inorganic (e.g., toxic elements) and organic (e.g., antibiotics and dyes) from water have been discussed in relation to feedstock properties, pyrolysis temperature, modification ratio, and environmental conditions here. The removal mechanisms of pollutants by MnOBC and the fate of the sorbed pollutants onto MnOBC have been reviewed. The impregnation of biochar with MnOx improved its surface morphology, functional group modification, and elemental composition, and thus increased its sorption capacity. This review establishes a comprehensive understanding of synthesizing and using MnOBC as an effective biosorbent for remediation of contaminated aqueous environments.