Atomistic Description of Ionic Diffusion in PEO–LiTFSI: Effect of Temperature, Molecular Weight, and Ionic Concentration

The sensitive aspects of modelling polymer-ceramic composite solid-state electrolytes using molecular dynamics simulations

Solid-state composite electrolytes have arisen as one of the most promising materials classes for next-generation Li-ion battery technology. These composites mix ceramic and solid-polymer ion conductors with the aim of combining the advantages of each material. The ion-transport mechanisms within such materials, however, remain elusive. This knowledge gap can to a large part be attributed to difficulties in studying processes at the ceramic-polymer interface, which are expected to play a major role in the overall ion transport through the electrolyte. Computational efforts have the potential of providing significant insight into these processes. One of the main challenges to overcome is then to understand how a sufficiently robust model can be constructed in order to provide reliable results. To this end, a series of molecular dynamics simulations are here carried out with a variation of certain structural (surface termination and polymer length) and pair potential (van der Waals parameters and partial charges) models of the Li7La3Zr2O12 (LLZO) poly(ethylene oxide) (PEO) system, in order to test how sensitive the outcome is to each variation. The study shows that the static and dynamic properties of Li-ion are significantly affected by van der Waals parameters as well as the surface terminations, while the thickness of the interfacial region - where the structure-dynamic properties are different as compared to the bulk-like regime - is the same irrespective of the simulation setup.

Threading Subunits for Polymers to Predict the Equilibrium Ensemble of Solid Polymer Electrolytes

We present a computational method for polymer growth called "threading subunits for polymers (TSP)" that can efficiently sample solid polymer electrolyte structures with extended conformations. The TSP method involves equilibrating subunit (e.g., monomer) conformations that form favorable solvation ion shells, followed by consecutively connecting the subunits and minimizing the structures. The TSP method can sample polymers with good solvent-like conformations and from near-equilibrium structures in which ions are well-dispersed, avoiding unusual ion clustering under ambient conditions. Using the TSP method, the equilibration time can be reduced significantly by effectively sampling the polymer conformations near equilibrium. We anticipate that the TSP method can be applied to simulate various polymer electrolytes.

Ion transport mechanisms in pectin-containing EC-LiTFSI electrolytes

Using all-atom molecular dynamics simulations, we report the structure and ion transport characteristics of a new class of solid polymer electrolytes that contain the biodegradable and mechanically stable biopolymer pectin. We used highly conducting ethylene carbonate (EC) as a solvent for simulating lithium-trifluoromethanesulfonimide (LiTFSI) salt containing different weight percentages of pectin. Our simulations reveal that the pectin chains reduce the coordination number of lithium ions around their counterions (and vice versa) because of stronger lithium-pectin interactions compared to lithium-TFSI interactions. Furthermore, the pectin is found to promote smaller ionic aggregates over larger ones, in contrast to the results typically reported for liquid and polymer electrolytes. We observed that the loading of pectin in EC-LiTFSI electrolytes increases their viscosity (η) and relaxation timescales (τc), indicating higher mechanical stability, and, consequently, a decrease of the mean squared displacement, diffusion coefficient (D), and Nernst-Einstein conductivity (σNE). Interestingly, while the lithium diffusivities are related to the ion-pair relaxation timescales as D+ ∼ τc-3.1, the TFSI- diffusivities exhibit excellent correlations with ion-pair relaxation timescales as D- ∼ τc-0.95. On the other hand, the NE conductivities are dictated by distinct transport mechanisms and scales with ion-pair relaxation timescales as σNE ∼ τc-1.85.

p-Phenylenediamine-Bridged Binder-Electrolyte-Unified Supramolecules for Versatile Lithium Secondary Batteries

The binder is an essential component in determining the structural integrity and ionic conductivity of Li-ion battery electrodes. However, conventional binders are not sufficiently conductive and durable to be used with solid-state electrolytes. In this study, a novel system is proposed for a Li secondary battery that combines the electrolyte and binder into a unified structure, which is achieved by employing para-phenylenediamine (pPD) moiety to create supramolecular bridges between the parent binders. Due to a partial crosslinking effect and charge-transferring structure of pPD, the proposed strategy improves both the ionic conductivity and mechanical properties by a factor of 6.4 (achieving a conductivity of 3.73 × 10-4 S cm-1 for poly(ethylene oxide)-pPD) and 4.4 (reaching a mechanical strength of 151.4 kPa for poly(acrylic acid)-pPD) compared to those of conventional parent binders. As a result, when the supramolecules of pPD are used as a binder in a pouch cell with a lean electrolyte loading of 2 µL mAh-1 , a capacity retention of 80.2% is achieved even after 300 cycles. Furthermore, when it is utilized as a solid-state electrolyte, an average Coulombic efficiency of 99.7% and capacity retention of 98.7% are attained under operations at 50 °C without external pressure or a pre-aging process.

Modelling structure and ionic diffusion in a class of ionic liquid crystal-based solid electrolytes

Next-generation high-efficiency Li-ion batteries require an electrolyte that is both safe and thermally stable. A possible choice for high performance all-solid-state Li-ion batteries is a liquid crystal, which possesses properties in-between crystalline solids and isotropic liquids. By employing molecular dynamics simulations together with various experimental techniques, we have designed and analyzed a novel liquid crystal electrolyte composed of rigid naphthalene-based moieties as mesogenic units, grafted to flexible alkyl chains of different lengths. We have synthesized novel highly ordered lamellar phase liquid crystal electrolytes at 99% purity and have evaluated the effect of alkyl chain length variation on ionic conduction. We find that the conductivity of the liquid crystal electrolytes is directly dependent on the extent of the nanochannels formed by molecule self-organization, which itself depends non-monotonously on the size of the alkyl chains. In addition, we show that the ion pair interaction between the anionic center of the liquid crystal molecules and the Li+ ions plays a crucial role in the overall conductivity. Based on our results, we suggest that further improvement of the ionic conductivity performance is possible, making this novel family of liquid crystal electrolytes a promising option for the design of entirely solid-state Li+ ion batteries.

Structural, energetic and dynamic investigation of poly(ethylene oxide) in imidazolium-based ionic liquids with different cationic structures

In this work, two imidazolium-based ionic liquids (ILs) with different cations including dications (DIL) and monocations (MIL) were blended with poly(ethylene oxide) (PEO). The influence of ILs' structure on the structural and dynamic properties of a PEO/IL system was investigated by molecular dynamics (MD) simulation and density functional theory (DFT) methods. The simulation results show that DIL exhibits weaker interaction with PEO than MIL due to a stronger IL aggregation effect. The intermolecular interaction also makes the PEO chain tend to organize around the imidazolium ring of ILs, which causes the conformational entropy loss. Compared with PEO/MIL, this phenomenon is more significant in PEO/DIL because of the double positive centers of the dication and a longer hydrogen bond lifetime. MD simulation also demonstrates that DIL could act as a "crosslinker" to promote the formation of a physical crosslinking network which has strong dependence on the concentration of IL. The competition between physical crosslinking and plasticizing effects induces non-monotonic variations of relaxation time in PEO/DIL, which is consistent with its unusual change of the glass transition temperature (Tg). Despite stronger hydrogen bonding interactions between PEO and MIL demonstrated by atom-in-molecules (AIM) and reduced density gradient (RDG) analysis, the segmental mobility is slower in PEO/DIL according to the MSD curve. These differences in multiple structural or energetic factors finally lead to different conductive mechanisms and hence obtain different ionic conductivities.

Exceptional n-type thermoelectric ionogels enabled by metal coordination and ion-selective association

Ionic liquid-based ionogels emerge as promising candidates for efficient ionic thermoelectric conversion due to their quasi-solid state, giant thermopower, high flexibility, and good stability. P-type ionogels have shown impressive performance; however, the development of n-type ionogels lags behind. Here, an n-type ionogel consisting of polyethylene oxide (PEO), lithium salt, and ionic liquid is developed. Strong coordination of lithium ion with ether oxygen and the anion-rich clusters generated by ion-preferential association promote rapid transport of the anions and boost Eastman entropy change, resulting in a huge negative ionic Seebeck coefficient (-15 millivolts per kelvin) and a high electrical conductivity (1.86 millisiemens per centimeter) at 50% relative humidity. Moreover, dynamic and reversible interactions among the ternary mixtures endow the ionogel with fast autonomous self-healing capability and green recyclability. All PEO-based ionic thermoelectric modules are fabricated, which exhibits outstanding thermal responses (-80 millivolts per kelvin for three p-n pairs), demonstrating great potential for low-grade energy harvesting and ultrasensitive thermal sensing.

Entropic Penalty Switches Li+ Solvation Site Formation and Transport Mechanisms in Mixed Polarity Copolymer Electrolytes

Emerging solid polymer electrolyte (SPE) designs for efficient Li-ion (Li+) conduction have relied on polarity and mobility contrast to improve conductivity. To further develop this concept, we employ simulations to examine Li+ solvation and transport in poly(oligo ethylene methacrylate) (POEM) and its copolymers with poly(glycerol carbonate methacrylate) (PGCMA). We find that Li+ is solvated by ether oxygens instead of the highly polar PGCMA, due to lower entropic penalties. The presence of PGCMA promotes single-chain solvation, thereby suppressing interchain Li+ hopping. The conductivity difference between random copolymer PGCMA-r-POEM and block copolymer PGCMA-b-POEM is explained in terms of a hybrid solvation site mechanism. With diffuse microscopic interfaces between domains, PGCMA near the POEM contributes to Li+ transport by forming hybrid solvation sites. The formation of such sites is hindered when PGCMA is locally concentrated. These findings help explain how thermodynamic driving forces govern Li+ solvation and transport in mixed SPEs.

Synergistic theoretical and experimental study on the ion dynamics of bis(trifluoromethanesulfonyl)imide-based alkali metal salts for solid polymer electrolytes

Model validation of a well-known class of solid polymer electrolyte (SPE) is utilized to predict the ionic structure and ion dynamics of alternative alkali metal ions, leading to advancements in Na-, K-, and Cs-based SPEs for solid-state alkali metal batteries. A comprehensive study based on molecular dynamics (MD) is conducted to simulate ion coordination and the ion transport properties of poly(ethylene oxide) (PEO) with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt across various LiTFSI concentrations. Through validation of the MD simulation results with experimental techniques, we gain a deeper understanding of the ionic structure and dynamics in the PEO/LiTFSI system. This computational approach is then extended to predict ion coordination and transport properties of alternative alkali metal ions. The ionic structure in PEO/LiTFSI is significantly influenced by the LiTFSI concentration, resulting in different lithium-ion transport mechanisms for highly concentrated or diluted systems. Substituting lithium with sodium, potassium, and cesium reveals a weaker cation-PEO coordination for the larger cesium-ion. However, sodium-ion based SPEs exhibit the highest cation transport number, indicating the crucial interplay between salt dissociation and cation-PEO coordination for achieving optimal performance in alkali metal SPEs.

Ion Solvation Cage Structure in Polymer Electrolytes Determined by Combining X-ray Scattering and Simulations

Solvation structure plays a crucial role in determining ion transport in electrolytes. We combine wide-angle X-ray scattering (WAXS) and molecular dynamics (MD) simulation to identify the solvation cage structure in two polymer electrolytes, poly(pentyl malonate) (PPM) and poly(ethylene oxide) (PEO) mixed with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt. As the salt concentration increases, the amorphous halo in the pure polymers is augmented by an additional peak at low scattering angles. The location of this peak and its height are, however, different in the two electrolytes. By decoupling the total intensity into species contributions and mapping scattering peaks to position-space molecular correlations, we elucidate distinct origins of the additional peak. In PPM, it arises from long-range charge-ordering between solvation cages and anions, while in PEO it is dominated by correlations between anions surrounding the same cage. TFSI- ions are present in the PPM solvation cage, but expelled from the PEO solvation cage.

Next-generation magnesium-ion batteries: The quasi-solid-state approach to multivalent metal ion storage

Mg-ion batteries offer a safe, low-cost, and high-energy density alternative to current Li-ion batteries. However, nonaqueous Mg-ion batteries struggle with poor ionic conductivity, while aqueous batteries face a narrow electrochemical window. Our group previously developed a water-in-salt battery with an operating voltage above 2 V yet still lower than its nonaqueous counterpart because of the dominance of proton over Mg-ion insertion in the cathode. We designed a quasi-solid-state magnesium-ion battery (QSMB) that confines the hydrogen bond network for true multivalent metal ion storage. The QSMB demonstrates an energy density of 264 W·hour kg-1, nearly five times higher than aqueous Mg-ion batteries and a voltage plateau (2.6 to 2.0 V), outperforming other Mg-ion batteries. In addition, it retains 90% of its capacity after 900 cycles at subzero temperatures (-22°C). The QSMB leverages the advantages of aqueous and nonaqueous systems, offering an innovative approach to designing high-performing Mg-ion batteries and other multivalent metal ion batteries.

Ethene-1,1-disulfonyl Difluoride (EDSF) for SuFEx Click Chemistry: Synthesis of SuFExable 1,1-Bissulfonylfluoride Substituted Cyclobutene Hubs

We present the synthesis of 1,1-bis(fluorosulfonyl)-2-(pyridin-1-ium-1-yl)ethan-1-ide, a bench-stable precursor to ethene-1,1-disulfonyl difluoride (EDSF). The novel SuFEx reagent, EDSF, is demonstrated in the preparation of 26 unique 1,1-bissulfonylfluoride substituted cyclobutenes via a cycloaddition reaction. The regioselective click cycloaddition reaction is rapid, straightforward, and highly efficient, enabling the generation of highly functionalized 4-membered ring (4MR) carbocycles. These carbocycles are valuable structural motifs found in numerous bioactive natural products and pharmaceutically relevant small molecules. Additionally, we showcase diversification of the novel cyclobutene cores through selective Cs2 CO3 -activated SuFEx click chemistry between a single S-F group and an aryl alcohol, yielding the corresponding sulfonate ester products with high efficiency. Finally, density functional theory calculations offer mechanistic insights about the reaction pathway.

Nuclear Magnetic Resonance Relaxation Pathways in Electrolytes for Energy Storage

Nuclear Magnetic Resonance (NMR) spin relaxation times have been an instrumental tool in deciphering the local environment of ionic species, the various interactions they engender and the effect of these interactions on their dynamics in conducting media. Of particular importance has been their application in studying the wide range of electrolytes for energy storage, on which this review is based. Here we highlight some of the research carried out on electrolytes in recent years using NMR relaxometry techniques. Specifically, we highlight studies on liquid electrolytes, such as ionic liquids and organic solvents; on semi-solid-state electrolytes, such as ionogels and polymer gels; and on solid electrolytes such as glasses, glass ceramics and polymers. Although this review focuses on a small selection of materials, we believe they demonstrate the breadth of application and the invaluable nature of NMR relaxometry.

Nanoscale Confinement Effects on Ionic Conductivity of Solid Polymer Electrolytes: The Interplay between Diffusion and Dissociation

Solid polymer electrolytes (SPEs) are attractive for next-generation lithium metal batteries but still suffer from low ionic conductivity. Nanostructured materials offer design concepts for SPEs with better performance. Using molecular dynamics simulation, we examine SPEs under nanoscale confinement, which has been demonstrated to accelerate the transport of neutral molecules such as water. Our results show that while ion diffusion indeed accelerates by more than 2 orders of magnitude as the channel diameter decreases from 15 to 2 nm, the ionic conductivity does not increase significantly in parallel. Instead, the ionic conductivity shows a nonmonotonic variation, with an optimal value above, but on the same order as, its bulk counterparts. This trend is due to enhanced ion association with decreasing channel size, which reduces the number of effective charge carriers. This effect competes with accelerated ion diffusion, leading to the nonmonotonicity in ion conductivity.

High-Capacity Sb/Fe2S3 Sodium-Ion Battery Anodes Fabricated by a One-Step Redox Reaction, Followed by Ball Milling with Graphite

Antimony (Sb) has been considered a promising anode for sodium-ion batteries (SIBs) owing to its high theoretical capacity (660 mA h g^-1) and low redox voltage (0.2-0.9 V vs Na⁺/Na). However, the capacity degradation caused by the volumetric variation during battery discharge/charge hinders the practical application. Herein, guided by the DFT calculation, Sb/Fe₂S₃ was fabricated by annealing Fe and Sb₂S₃ mixed powder. Next, Sb/Fe₂S₃ was blended with 15 wt % graphite by ball milling, yielding nano-Sb/Fe₂S₃ anchored on an exfoliated graphite composite (denoted as Sb/Fe₂S₃-15%). When applied as an anode of SIBs, Sb/Fe₂S₃-15% delivered reversible capacities of 565, 542, 467, 366, 285, and 236 mA h g^-1 at current rates of 1, 2, 4, 6, 8, and 10 A g^-1, respectively, surpassing most of the Sb-based anodes. The co-existence of highly conductive Fe₂S₃ and Sb minimizes the polarization of the anode. Our experiments proved that the Sb and Fe₂S₃ phases were reversible during discharge/charge cycling, and the exfoliated graphite can accelerate the Na⁺ diffusion and e^- conduction. The proposed synthesis method of this work can also be applicable to synthesize various antimony/transition metal sulfide heterostructures (Sb/M_1-xS), which may be applied in a series of fields.

Molecular Origin of High Cation Transference in Mixtures of Poly(pentyl malonate) and Lithium Salt

The rational development of new electrolytes for lithium batteries rests on the molecular-level understanding of ion transport. We use molecular dynamics simulations to study the differences between a recently developed promising polymer electrolyte based on poly(pentyl malonate) (PPM) and the well-established poly(ethylene oxide) (PEO) electrolyte; LiTFSI is the salt used in both electrolytes. Cation transference is calculated by tracking the correlated motion of different species. The PEO solvation cage primarily contains 1 chain, resulting in strong correlations between Li⁺ and the polymer. In contrast, the PPM solvation cage contains multiple chains, resulting in weak correlations between Li⁺ and the polymer. This difference results in a high cation transference in PPM relative to PEO. Our comparative study suggests possible designs of polymer electrolytes with ion transport properties better than both PPM and PEO. The solvation cage of such a hypothetical polymer electrolyte is proposed based on insights from our simulations.

Charge Transport in Water-NaCl Electrolytes with Molecular Dynamics Simulations

A systematic description of microscopic mechanisms is necessary to understand mass transport in solid and liquid electrolytes. From Molecular Dynamics (MD) simulations, transport properties can be computed and provide a detailed view of the molecular and ionic motions. In this work, ionic conductivity and transport numbers in electrolyte systems are computed from equilibrium and nonequilibrium MD simulations. Results from the two methods are compared with experimental results, and we discuss the significance of the frame of reference when determining and comparing transport numbers. Two ways of computing ionic conductivity from equilibrium simulations are presented: the Nernst-Einstein approximation or the Onsager coefficients. The Onsager coefficients take ionic correlations into account and are found to be more suitable for concentrated electrolytes. Main features and differences between equilibrium and nonequilibrium simulations are discussed, and some potential anomalies and critical pitfalls of using nonequilibrium molecular dynamics to determine transport properties are highlighted.

Distinct effects of zwitterionic molecules on ionic solvation in (ethylene oxide)10: a molecular dynamics simulation study

Ion-containing polymers play a critical role in various energy and sensing applications. Adjusting ionic solvation is one approach to tune the performance of ion-containing polymers. Small zwitterionic molecule additives have presented their ability to regulate ionic solvation because they possess two charged groups covalently connected together. One remaining question is how the effect of zwitterionic molecules on ionic solvation depends on their own chemical structures, especially the anionic groups. To shed light on this question, we investigate the ionic solvation structure and dynamics in LiTFSI/(ethylene oxide)₁₀ (EO₁₀) with the presence of three distinct zwitterionic molecules (MPC, SB, and CB) using molecular dynamics simulations (MPC: 2-methacryloyloxyethyl phosphorylcholine, SB: sulfobetaine ethylimidazole, CB: carboxybetaine ethylimidazole, and LiTFSI: lithium bis(trifluoromethylsulfonyl)-imide). The simulation systems include two Li⁺ : O(EO₁₀) molar ratios: 1 : 6 and 1 : 18. The simulation results show that all three zwitterionic molecules reduce the Li⁺-EO₁₀ coordination number in the order of MPC > CB > SB. In addition, nearly 10% of Li⁺ exclusively coordinates with MPC molecules, only 2-4% of Li⁺ exclusively cooridinates with CB molecules, while no Li⁺ exclusively coordinates with SB molecules. MPC molecules also present the most stable Li⁺ coordination among the three zwitterionic molecules. Our simulations indicate that zwitterionic molecule additives may benefit a high Li⁺ concentration environment. At a low Li⁺ concentration, all three zwitterionic molecules reduce the diffusion coefficient of Li⁺. However, at a high Li⁺ concentration, only SB molecules reduce the diffusion coefficient of Li⁺.

Elucidating the Molecular Origins of the Transference Number in Battery Electrolytes Using Computer Simulations

The rate at which rechargeable batteries can be charged and discharged is governed by the selective transport of the working ions through the electrolyte. Conductivity, the parameter commonly used to characterize ion transport in electrolytes, reflects the mobility of both cations and anions. The transference number, a parameter introduced over a century ago, sheds light on the relative rates of cation and anion transport. This parameter is, not surprisingly, affected by cation-cation, anion-anion, and cation-anion correlations. In addition, it is affected by correlations between the ions and neutral solvent molecules. Computer simulations have the potential to provide insights into the nature of these correlations. We review the dominant theoretical approaches used to predict the transference number from simulations by using a model univalent lithium electrolyte. In electrolytes of low concentration, one can obtain a quantitative model by assuming that the solution is made up of discrete ion-containing clusters-neutral ion pairs, negatively and positively charged triplets, neutral quadruplets, and so on. These clusters can be identified in simulations using simple algorithms, provided their lifetimes are sufficiently long. In concentrated electrolytes, more clusters are short-lived and more rigorous approaches that account for all correlations are necessary to quantify transference. Elucidating the molecular origin of the transference number in this limit remains an unmet challenge.

Molecular-Level Insight into Charge Carrier Transport and Speciation in Solid Polymer Electrolytes by Chemically Tuning Both Polymer and Lithium Salt

The advent of Li-metal batteries has seen progress toward studies focused on the chemical modification of solid polymer electrolytes, involving tuning either polymer or Li salt properties to enhance the overall cell performance. This study encompasses chemically modifying simultaneously both polymer matrix and lithium salt by assessing ion coordination environments, ion transport mechanisms, and molecular speciation. First, commercially used lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt is taken as a reference, where F atoms become partially substituted by one or two H atoms in the -CF₃ moieties of LiTFSI. These substitutions lead to the formation of lithium(difluoromethanesulfonyl)(trifluoromethanesulfonyl)imide (LiDFTFSI) and lithium bis(difluoromethanesulfonyl)imide (LiDFSI) salts. Both lithium salts promote anion immobilization and increase the lithium transference number. Second, we show that exchanging archetypal poly(ethylene oxide) (PEO) with poly(ε-caprolactone) (PCL) significantly changes charge carrier speciation. Studying the ionic structures of these polymer/Li salt combinations (LiTFSI, LiDFTFSI or LiDFSI with PEO or PCL) by combining molecular dynamics simulations and a range of experimental techniques, we provide atomistic insights to understand the solvation structure and synergistic effects that impact macroscopic properties, such as Li⁺ conductivity and transference number.

Insight into the Key Factors in High Li+ Transference Number Composite Electrolytes for Solid Lithium Batteries

Solid lithium batteries (SLBs) have received much attention due to their potential to achieve secondary batteries with high energy density and high safety. The solid electrolyte (SE) is believed to be the essential material for SLBs. Among the recent SEs, composite electrolytes have good interfacial compatibility and customizability, which have been broadly investigated as promising contenders for commercial SLBs. The high Li⁺ transference number (t Li + ${{_{{\rm Li}{^{+}}}}}$ ) of composite electrolytes is critically important concerning the power/energy density and cycling life of SLBs, however, which is often overlooked. This Review presents a current opinion on the key factors in high t Li + ${{_{{\rm Li}{^{+}}}}}$ composite electrolytes, including polymers, Li-salts, inorganic fillers, and additives. Various strategies concerning providing a continuous pathway for Li-ions and immobilizing anions via component interaction are discussed. This Review highlights the major obstacles hindering the development of high t Li + ${{_{{\rm Li}{^{+}}}}}$ composite electrolytes and proposes future research directions for developing composite electrolytes with high t Li + ${{_{{\rm Li}{^{+}}}}}$ .

Effect of Alkyl Side Chain Length on the Lithium-Ion Conductivity for Polyether Electrolytes

The design guidelines of polymer structure to effectively promote lithium-ion conduction within the polymer electrolytes (PEs) are crucial for its practical use. In this study, the electrolyte properties of a simple polyether having alkyl side chains with varied lengths (−(CH₂)_m−H, m = 1, 2, 4, 6, 8, and 12) were compared and established a valid design strategy based on the properties of the alkyl side chain. Various spectro-electrochemical measurements successfully connected the electrolyte properties and the alkyl side chain length. Steric hindrance of the alkyl side chain effectively suppressed the interaction between ether oxygen and lithium-ion (m ≥ 2), decreasing the glass transition temperature and the activation energy of lithium-ion transfer at the electrode-electrolyte interface. The strong hydrophobic interactions aligned and/or aggregated the extended alkyl group (m ≥ 8), creating a rapid lithium-ion transport pathway and enhancing lithium-ion conductivity. A clear trend was observed for the following three crucial factors determining bulk lithium-ion transport properties along with the extension of the alkyl side chain: 1) salt dissociability decreased due to the non-polarity of the alkyl side chain, 2) segmental mobility of polymer chains increased due to the internal plasticizing effect, and 3) lithium-ion transference number increased due to the inhibition of the bulky anion transport by its steric hindrance. The highest lithium-ion conductivity was confirmed for the PEs with an alkyl side chain of moderate length (m = 4) at 70°C, indicating the optimized balance between salt dissociability, polymer segmental mobility, and selective lithium-ion transfer. The length of an alkyl side chain can thus be a critical factor in improving the performance of PEs, including thermal stability and lithium-ion conductivity. Precise tuning of the alkyl side chain-related parameters such as steric hindrance, polarity, internal plasticizing effect, and self-alignment optimizes the polymer segmental mobility and salt dissociability, which is crucial for realizing high lithium-ion conductivity for PEs.

Dynamical Ion Association and Transport Properties in PEO-LiTFSI Electrolytes: Effect of Salt Concentration

The association of ions describes the formation of ion species in electrolyte solutions and is strongly related to the salt concentration. However, the discussion of ion species and their transport is ambiguous in some studies on electrolyte materials due to the assumption of ideal solutions. Accordingly, in this work, molecular dynamics simulations are used to study ion association and transport properties of poly(ethylene)oxide (PEO)-lithium bis(trifluoromethanesulfonyl)imide electrolytes over a range of salt concentrations (r = [Li]/[EO]) from 0.01 to 0.20. Based on the analysis of the solvation environment and ion species, it is revealed that the distinct ion-ion correlations exist in two different characteristic areas, with a salt concentration of 0.10 as the limit. Below the critical concentration, the dynamic equilibrium between free ions and ion pairs is the most important process affecting the transport properties of electrolytes, but the process may have a minor influence on the applicability of the Nernst-Einstein relation. In concentrated solutions, a large number of ion pairs, triplets, and so forth appear in the electrolytes. The high-order ion clusters, with an average size of 3.95 at r = 0.20, are the main stable structures for transporting Li⁺, but the trapped free ions are the most abundant ion species. Meanwhile, the effect of salt concentrations on the average transport of ion clusters is to increase their average lifetime, but their transport rates remain unchanged. In addition, the coupling dynamics between ions and polymers is also discussed in order to gain a complete insight into the importance of salt concentrations.

Electric-Field-Induced Spatially Dynamic Heterogeneity of Solvent Motion and Cation Transference in Electrolytes

While electric fields primarily result in migration of charged species in electrolytic solutions, the solutions are dynamically heterogeneous. Solvent molecules within the solvation shells of the cation will be dragged by the field while free solvent molecules will not. We combine electrophoretic NMR measurements of ion and solvent velocities under applied electric fields with molecular dynamics simulations to interrogate different solvation motifs in a model liquid electrolyte. Measured values of the cation transference number (t_{+}^{0}) agree quantitatively with simulation-based predictions over a range of electrolyte concentrations. Solvent-cation interactions strongly influence the concentration-dependent behavior of t_{+}^{0}. We identify a critical concentration at which most of the solvent molecules lie within solvation shells of the cations. The dynamic heterogeneity of solvent molecules is minimized at this concentration where t_{+}^{0} is approximately equal to zero.

Ethylene oxide functionalization enhances the ionic conductivity of a MOF

Varying the degree of ethylene oxide (EO) functionalization of the zirconium MOF UiO-68 affords two novel MOFs; UiO-68-EO and UiO-68-2EO exhibit solvent-free ionic conductivity upon loading LiTFSI in their pores. Incorporating EO chains provides a pathway for lithium ion migration between the coordinated sites and results in an ionic conductivity of 3.8 × 10^-7 S cm^-1 and 3.9 × 10^-4 S cm^-1 at 90 °C for UiO-68-EO/LiTFSI and UiO-68-2EO/LiTFSI respectively.

Polyether-based solid electrolytes with a homogeneous polymer network: effect of the salt concentration on the Li-ion coordination structure

We report a solid polymer electrolyte with an ideal polyether network that was synthesized by using tetra-functional poly(ethylene glycol) (TetraPEG) and lithium bis(trifluoromethanesulfonyl)amide (LiTFSA) salt. The solid TetraPEG electrolyte had few network defects (<5%) and exhibited high mechanical toughness by enduring approximately 11-fold elongation at a 1 : 10 ratio of Li salt to O atoms of PEG (Li/O_PEG). We found that the mechanical properties strongly depend on the Li/O_PEG ratio, which mainly contributes to the density of crosslinking points in the electrolyte. Raman spectroscopy and high-energy X-ray total scattering were used with all-atom molecular dynamics simulations to visualize the structural effects of Li-ion coordination in the TetraPEG network. At lower salt contents (Li/O_PEG = 1 : 10), Li ions were found to preferentially coordinate with O_PEG atoms rather than the TFSA anions to form crown ether-like Li⁺-PEG complexes as ion pair-free species. With increasing salt content, the TFSA anions partially coordinated with Li ions through O atoms of TFSA (O_TFSA) to afford contact ion pairs surrounded by both O_PEG and O_TFSA atoms. Finally, the ion pairing enhanced mononuclear ion pairs as well as multinuclear ionic aggregates when more Li salt was added. This structural change in the Li-ion complexes was directly reflected by the ion-conducting properties of the electrolyte. The TetraPEG electrolyte composed of the ion pair-free Li⁺ species (Li/O_PEG = 1 : 10) exhibited higher ionic conductivity, and the conductivity gradually decreased with increasing salt content because of extensive ion pairing for both mononuclear contact ion pairs and multinuclear aggregates. Regarding the electrochemical properties, the optimum electrolyte composition to realize a reversible Li deposition/dissolution reaction for a negative electrode was found to be Li/O_PEG = 1 : 4.

Graphene Oxide Aerogel Foam Constructed All-Solid Electrolyte Membranes for Lithium Batteries

With the development of electric vehicles and products, lithium metal batteries with solid-state electrolytes have shown a broad application prospect. However, the uneven deposition of lithium, low ion conductivity, narrow electrochemical window, and high interfacial impedance limit the safety and performance of the solid-state batteries. Herein, we develop a non-ceramic solid electrolyte based on the graphene oxide aerogel frame filling with polyethylene oxide (GSPE). The resulting uniform and resilient framework structure form a continuous Li-ion adsorption zone, which ensures uniform ion-current distribution at the interface while obtaining the relatively high ionic conductivity, effectively preventing the uneven deposition of lithium, and thus greatly improving the battery stability. Comprehensive electrochemical analysis showed that GSPE achieved an ionic conductivity of 4.12 × 10^-4 S cm^-1 at 50 °C. The assembled LiFePO₄(LFP) |GSPE| Li full battery can stably cycle for more than 100 cycles at 0.1 C, and the lithium symmetrical battery can continuously be plating-peeling for more than 600 h at 0.1 mA cm^-2. The method of using the carbon aerogel structure to achieve the uniform deposition of lithium ions has explored a new possible research direction for all-solid-state batteries.

Sulfonyl fluorides as targets and substrates in the development of new synthetic methods

The advent of sulfur(VI)-fluoride exchange (SuFEx) processes as transformations with click-like reactivity has invigorated research into electrophilic species featuring a sulfur-fluorine bond. Among these, sulfonyl fluorides have emerged as the workhorse functional group, with diverse applications being reported. Sulfonyl fluorides are used as electrophilic warheads by both medicinal chemists and chemical biologists. The balance of reactivity and stability that is so attractive for these applications, particularly the resistance of sulfonyl fluorides to hydrolysis under physiological conditions, has provided opportunities for synthetic chemists. New synthetic approaches that start with sulfur-containing substrates include the activation of sulfonamides using pyrilium salts, the deoxygenation of sulfonic acids, and the electrochemical oxidation of thiols. Employing non-sulfur-containing substrates has led to the development of transition-metal-catalysed processes based on palladium, copper and nickel, as well as the use of SO₂F₂ gas as an electrophilic hub. Selectively manipulating molecules that already contain a sulfonyl fluoride group has also proved to be a popular tactic, with metal-catalysed processes again at the fore. Finally, coaxing sulfonyl fluorides to engage with nucleophiles, when required, and under suitable reaction conditions, has led to new activation methods. This Review provides an overview of the challenges in the efficient synthesis and manipulation of these intriguing functional groups.

One-pot synthesis of polysulfonate by cascading sulfur(VI) fluorine exchange (SuFEx) reaction and cyanosilylation of aldehyde

As a kind of excellent engineering polymer material, the synthesis of polysulfonate has attracted intense attention in recent years. In this work, four new polysulfonates with cyano substitution on the...

Molecular Simulations Guided Polymer Electrolyte towards Superior Low-Temperature Solid Lithium-Metal Batteries

Low-temperature operation is a challenge for solid-lithium-metal batteries (LMBs), and insufficient ionic conductivity is the main obstacle. Herein, guided by the molecular dynamics simulations (MDS), a solid polymer electrolyte (SPE) based on poly(1,3-dioxolane) (PDOL) with sufficient ionic conductivity at low temperature is reported. In situ X-ray diffraction (XRD) and differential scanning calorimetry (DSC) tests reveal that the PDOL-based SPE could well maintain amorphous nature at low temperatures, contributing to excellent ionic transport. The MDS analysis of the Li-O coordination environment indicates that more oxygen atoms bonded with Li⁺ in PDOL than in poly(ethylene oxide) (PEO) at low temperatures, thus we could envision the preponderance of PDOL as a better polymer matrix of SPE for low-temperature solid LMBs. It delivers a high capacity of 103 mAh g^-1 and 85% retention for 200 cycles for Li||LiFePO₄ at -20 °C, showing great potential for application in low-temperature solid LMBs in cold climates.

Introducing A New Class of Sulfonyl Fluoride Hubs via Radical Chloro-Fluorosulfonylation of Alkynes

Sulfonyl fluorides have widespread applications in many important fields, including ligation chemistry, chemical biology, and drug discovery. Therefore, new methods to increase the synthetic efficiency and expand the available structures of sulfonyl fluorides are highly in demand. Here, we introduce a new and powerful class of sulfonyl fluoride hubs, β-chloro alkenylsulfonyl fluorides (BCASF), which can be constructed via radical chloro-fluorosulfonyl difunctionalization of alkynes under photoredox conditions. BCASF molecules exhibit versatile reactivities and well undergo a series of transformations at the chloride site while keeping the sulfonyl fluoride group intact, including reduction, Suzuki coupling, Sonogashira coupling, as well as nucleophilic substitution with various nitrogen, oxygen, and sulfur nucleophiles. By using BCASF as a synthetic hub, a wide range of sulfonyl fluorides becomes readily accessible, such as cis alkenylsulfonyl fluorides, dienylsulfonyl fluorides, and ynenylsulfonyl fluorides, which are challenging or even not possible to synthesize before with the known methods. Moreover, further application of BCASF to the late-stage modification of peptides and drugs is also demonstrated.

Molecular Dynamics Study of Ion Transport in Polymer Electrolytes of All-Solid-State Li-Ion Batteries

Atomistic analysis of the ion transport in polymer electrolytes for all-solid-state Li-ion batteries was performed using molecular dynamics simulations to investigate the relationship between Li-ion transport and polymer morphology. Polyethylene oxide (PEO) and poly(diethylene oxide-alt-oxymethylene), P(2EO-MO), were used as the electrolyte materials, and the effects of salt concentrations and polymer types on the ion transport properties were explored. The size and number of LiTFSI clusters were found to increase with increasing salt concentrations, leading to a decrease in ion diffusivity at high salt concentrations. The Li-ion transport mechanisms were further analyzed by calculating the inter/intra-hopping rate and distance at various ion concentrations in PEO and P(2EO-MO) polymers. While the balance between the rate and distance of inter-hopping was comparable for both PEO and P(2EO-MO), the intra-hopping rate and distance were found to be higher in PEO than in P(2EO-MO), leading to a higher diffusivity in PEO. The results of this study provide insights into the correlation between the nanoscopic structures of ion solvation and the dynamics of Li-ion transport in polymer electrolytes.

SuFExable polymers with helical structures derived from thionyl tetrafluoride

Sulfur(VI) fluoride exchange (SuFEx) is a category of click chemistry that enables covalent linking of modular units through sulfur(VI) connective hubs. The efficiency of SuFEx and the stability of the resulting bonds have led to polymer chemistry applications. Now, we report the SuFEx click chemistry synthesis of several structurally diverse SOF₄-derived copolymers based on the polymerization of bis(iminosulfur oxydifluorides) and bis(aryl silyl ethers). This polymer class presents two key characteristics. First, the [-N=S(=O)F-O-] polymer backbone linkages are themselves SuFExable and undergo precise SuFEx-based post-modification with phenols or amines to yield branched functional polymers. Second, studies of individual polymer chains of several of these new materials indicate helical polymer structures. The robust nature of SuFEx click chemistry offers the potential for post-polymerization modification, enabling the synthesis of materials with control over composition and conformation.

Unveiling Interfacial Li-Ion Dynamics in Li7La3Zr2O12/PEO(LiTFSI) Composite Polymer-Ceramic Solid Electrolytes for All-Solid-State Lithium Batteries

Unlocking the full potential of solid-state electrolytes (SSEs) is key to enabling safer and more-energy dense technologies than today's Li-ion batteries. In particular, composite materials comprising a conductive, flexible polymer matrix embedding ceramic filler particles are emerging as a good strategy to provide the combination of conductivity and mechanical and chemical stability demanded from SSEs. However, the electrochemical activity of these materials strongly depends on their polymer/ceramic interfacial Li-ion dynamics at the molecular scale, whose fundamental understanding remains elusive. While this interface has been explored for nonconductive ceramic fillers, atomistic modeling of interfaces involving a potentially more promising conductive ceramic filler is still lacking. We address this shortfall by employing molecular dynamics and enhanced Monte Carlo techniques to gain unprecedented insights into the interfacial Li-ion dynamics in a composite polymer-ceramic electrolyte, which integrates polyethylene oxide plus LiN(CF₃SO₂)₂ lithium imide salt (LiTFSI), and Li-ion conductive cubic Li₇La₃Zr₂O₁₂ (LLZO) inclusions. Our simulations automatically produce the interfacial Li-ion distribution assumed in space-charge models and, for the first time, a long-range impact of the garnet surface on the Li-ion diffusivity is unveiled. Based on our calculations and experimental measurements of tensile strength and ionic conductivity, we are able to explain a previously reported drop in conductivity at a critical filler fraction well below the theoretical percolation threshold. Our results pave the way for the computational modeling of other conductive filler/polymer combinations and the rational design of composite SSEs.

Lithium-Rich Anti-perovskite Li2OHBr-Based Polymer Electrolytes Enabling an Improved Interfacial Stability with a Three-Dimensional-Structured Lithium Metal Anode in All-Solid-State Batteries

All-solid-state lithium-metal batteries, with their high energy density and high-level safety, are promising next-generation energy storage devices. Their current performance is however compromised by lithium dendrite formation. Although using 3D-structured metal-based electrode materials as hosts to store lithium metal has the potential to suppress the lithium dendrite growth by providing a high surface area with lithiophilic sites, their rigid and ragged interface with solid-state electrolytes is detrimental to the battery performance. Herein, we show that Li₂OHBr-containing poly(ethylene oxide) (PEO) polymer electrolytes can be used as a flexible solid-state electrolyte to mitigate the interfacial issues of 3D-structured metal-based electrodes and suppress the lithium dendrite formation. The presence of Li₂OHBr in a PEO matrix can simultaneously improve the mechanical strength and lithium ion conductivity of the polymer electrolyte. It is confirmed that Li₂OHBr does not only induce the PEO transformation of a crystalline phase to an amorphous phase but also serves as an anti-perovskite superionic conductor providing additional lithium ion transport pathways and hence improves the lithium ion conductivity. The good interfacial contact and high lithium ion conductivity provide sufficient lithium deposition sites and uniform lithium ion flux to regulate the lithium deposition without the formation of lithium dendrites. Consequently, the Li₂OHBr-containing PEO polymer electrolyte in a lithium-metal battery with a 3D-structured lithium/copper mesh composite anode is able to improve the cycle stability and rate performance. The results of this study provide the experimental proof of the beneficial effects of the Li₂OHBr-containing PEO polymer electrolyte on the 3D-structured lithium metal anode.

Solid Polymer Electrolytes with High Conductivity and Transference Number of Li Ions for Li-Based Rechargeable Batteries

Smart electronics and wearable devices require batteries with increased energy density, enhanced safety, and improved mechanical flexibility. However, current state-of-the-art Li-based rechargeable batteries (LBRBs) use highly reactive and flowable liquid electrolytes, severely limiting their ability to meet the above requirements. Therefore, solid polymer electrolytes (SPEs) are introduced to tackle the issues of liquid electrolytes. Nevertheless, due to their low Li⁺ conductivity and Li⁺ transference number (LITN) (around 10^-5 S cm^-1 and 0.5, respectively), SPE-based room temperature LBRBs are still in their early stages of development. This paper reviews the principles of Li⁺ conduction inside SPEs and the corresponding strategies to improve the Li⁺ conductivity and LITN of SPEs. Some representative applications of SPEs in high-energy density, safe, and flexible LBRBs are then introduced and prospected.