Vertical Self-Assembly of Polarized Phage Nanostructure for Energy Harvesting

Virus-Based Pyroelectricity

The first observation of heat-induced electrical potential generation on a virus and its detection through pyroelectricity are presented. Specifically, the authors investigate the pyroelectric properties of the M13 phage, which possesses inherent dipole structures derived from the noncentrosymmetric arrangement of the major coat protein (pVIII) with an α-helical conformation. Unidirectional polarization of the phage is achieved through genetic engineering of the tail protein (pIII) and template-assisted self-assembly techniques. By modifying the pVIII proteins with varying numbers of glutamate residues, the structure-dependent tunable pyroelectric properties of the phage are explored. The most polarized phage exhibits a pyroelectric coefficient of 0.13 µC m-2 °C-1 . Computational modeling and circular dichroism (CD) spectroscopy analysis confirm that the unfolding of α-helices within the pVIII proteins leads to changes in phage polarization upon heating. Moreover, the phage is genetically modified to enable its pyroelectric function in diverse chemical environments. This phage-based approach not only provides valuable insights into bio-pyroelectricity but also opens up new opportunities for the detection of various viral particles. Furthermore, it holds great potential for the development of novel biomaterials for future applications in biosensors and bioelectric materials.

Rugged Forest Morphology of Magnetoplasmonic Nanorods that Collect Maximum Light for Photoelectrochemical Water Splitting

A feasible nanoscale framework of heterogeneous plasmonic materials and proper surface engineering can enhance photoelectrochemical (PEC) water-splitting performance owing to increased light absorbance, efficient bulk carrier transport, and interfacial charge transfer. This article introduces a new magnetoplasmonic (MagPlas) Ni-doped Au@Fex Oy nanorods (NRs) based material as a novel photoanode for PEC water-splitting. A two stage procedure produces core-shell Ni/Au@Fex Oy MagPlas NRs. The first-step is a one-pot solvothermal synthesis of Au@Fex Oy . The hollow Fex Oy nanotubes (NTs) are a hybrid of Fe2 O3 and Fe3 O4 , and the second-step is a sequential hydrothermal treatment for Ni doping. Then, a transverse magnetic field-induced assembly is adopted to decorate Ni/Au@Fex Oy on FTO glass to be an artificially roughened morphologic surface called a rugged forest, allowing more light absorption and active electrochemical sites. Then, to characterize its optical and surface properties, COMSOL Multiphysics simulations are carried out. The core-shell Ni/Au@Fex Oy MagPlas NRs increase photoanode interface charge transfer to 2.73 mAcm-2 at 1.23 V RHE. This improvement is made possible by the rugged morphology of the NRs, which provide more active sites and oxygen vacancies as the hole transfer medium. The recent finding may provide light on plasmonic photocatalytic hybrids and surface morphology for effective PEC photoanodes.

Advantages and Prospective Implications of Smart Materials in Tissue Engineering: Piezoelectric, Shape Memory, and Hydrogels

Conventional biomaterial is frequently used in the biomedical sector for various therapies, imaging, treatment, and theranostic functions. However, their properties are fixed to meet certain applications. Smart materials respond in a controllable and reversible way, modifying some of their properties because of external stimuli. However, protein-based smart materials allow modular protein domains with different functionalities and responsive behaviours to be easily combined. Wherein, these "smart" behaviours can be tuned by amino acid identity and sequence. This review aims to give an insight into the design of smart materials, mainly protein-based piezoelectric materials, shape-memory materials, and hydrogels, as well as highlight the current progress and challenges of protein-based smart materials in tissue engineering. These materials have demonstrated outstanding regeneration of neural, skin, cartilage, bone, and cardiac tissues with great stimuli-responsive properties, biocompatibility, biodegradability, and biofunctionality.

Simulation and Performance Evaluation of a Bio-Inspired Nanogenerator for Medical Applications

Providing sufficient energy for autonomous systems at the nanoscale is one of the major challenges of the Internet of Nano Things (IoNT). Existing battery technologies and conventional integrated circuits cannot be used in such small dimensions. Even if they are small enough to be used at the nano level, they still cannot be used in medical applications due to biocompatibility issues. M13 is a very promising virus with piezoelectric properties, which has attracted much interest in the scientific community as a bioenergy harvester. However, M13 studies presented so far in the literature are designed only for macroscale systems. In this paper, we simulate two designs of a bio-inspired nanogenerator based on the properties of M13 for nanosystems. We derive the stiffness matrix of M13, its dielectric and piezoelectric matrices and its density. We verify our calculated values by comparing our simulations with the results of experimental studies presented in the literature. We also evaluate the system's performance in terms of frequency response and loading characteristics. The results presented in this study show that a single M13 is a very promising nano-generator that can be used for medical applications.

Biodegradable Piezoelectric Polymers: Recent Advancements in Materials and Applications

Recent materials, microfabrication, and biotechnology improvements have introduced numerous exciting bioelectronic devices based on piezoelectric materials. There is an intriguing evolution from conventional unrecyclable materials to biodegradable, green, and biocompatible functional materials. As a fundamental electromechanical coupling material in numerous applications, novel piezoelectric materials with a feature of degradability and desired electrical and mechanical properties are being developed for future wearable and implantable bioelectronics. These bioelectronics can be easily integrated with biological systems for applications, including sensing physiological signals, diagnosing medical problems, opening the blood-brain barrier, and stimulating healing or tissue growth. Therefore, the generation of piezoelectricity from natural and synthetic bioresorbable polymers has drawn great attention in the research field. Herein, the significant and recent advancements in biodegradable piezoelectric materials, including natural and synthetic polymers, their principles, advanced applications, and challenges for medical uses, are reviewed thoroughly. The degradation methods of these piezoelectric materials through in vitro and in vivo studies are also investigated. These improvements in biodegradable piezoelectric materials and microsystems could enable new applications in the biomedical field. In the end, potential research opportunities regarding the practical applications are pointed out that might be significant for new materials research.

Nanotubes from bacteriophage tail sheath proteins: internalisation by cancer cells and macrophages

Bionanoparticles comprised of naturally occurring monomers are gaining interest in the development of novel drug transportation systems. Here we report on the stabilisation, cellular uptake, and macrophage clearance of nanotubes formed from the self-assembling gp053 tail sheath protein of the vB_EcoM_FV3 bacteriophage. To evaluate the potential of the bacteriophage protein-based nanotubes as therapeutic nanocarriers, we investigated their internalisation into colorectal cancer cell lines and professional macrophages that may hinder therapeutic applications by clearing nanotube carriers. We fused the bacteriophage protein with a SNAP-tag self-labelling enzyme and demonstrated that its activity is retained in assembled nanotubes, indicating that such carriers can be applied to deliver therapeutic biomolecules. Under physiological conditions, the stabilisation of the nanotubes by PEGylation was required to prevent aggregation and yield a stable solution with uniform nano-sized structures. Colorectal carcinoma cells from primary and metastatic tumours internalized SNAP-tag-carrying nanotubes with different efficiencies. The nanotubes entered HCT116 cells via dynamin-dependent and SW480 cells - via dynamin- and clathrin-dependent pathways and were accumulated in lysosomes. Meanwhile, peritoneal macrophages phagocytosed the nanotubes in a highly efficient manner through actin-dependent mechanisms. Macrophage clearance of nanotubes was enhanced by inflammatory activation but was dampened in macrophages isolated from aged animals. Altogether, our results demonstrate that gp053 nanotubes retained the cargo's enzymatic activity post-assembly and had the capacity to enter cancer cells. Furthermore, we emphasise the importance of evaluating the nanocarrier clearance by immune cells under conditions mimicking a cancerous environment.

Design of a Hierarchical Assembly at a Solid-Liquid Interface Using an Asymmetric Protein Needle

Design and control of processes for a hierarchical assembly of proteins remain challenging because it requires consideration of design principles with atomic-level accuracy. Previous studies have adopted symmetry-based strategies to minimize the complexity of protein-protein interactions and this has placed constraints on the structures of the resulting protein assemblies. In the present work, we used an anisotropic-shaped protein needle, gene product 5 (gp5) from bacteriophage T4 with a C-terminal hexahistidine-tag (His-tag) (gp5_CHis), to construct a hierarchical assembly with two distinct protein-protein interaction sites. High-speed atomic force microscopy (HS-AFM) measurements reveal that it forms unique tetrameric clusters through its N-terminal head on a mica surface. The clusters further self-assemble into a monolayer through the C-terminal His-tag. The HS-AFM images and displacement analyses show that the monolayer is a network-like structure rather than a crystalline lattice. Our results expand the toolbox for constructing hierarchical protein assemblies based on structural anisotropy.

Reassessment of Historical Clinical Trials Supports the Effectiveness of Phage Therapy

Phage therapy has become a hot topic in medical research due to the increasing prevalence of antibiotic-resistant bacteria strains. In the treatment of bacterial infections, bacteriophages have several advantages over antibiotics, including strain specificity, lack of serious side effects, and low development costs. However, scientists dismissed the clinical success of early clinical trials in the 1940s, slowing the adoption of this promising antibacterial application in Western countries. The current study used statistical methods commonly used in modern meta-analysis to reevaluate early 20th-century studies and compare them with clinical trials conducted in the last 20 years. Using a random effect model, the development of disease after treatment with or without phages was measured in odds ratios (OR) with 95% confidence intervals (CI). Based on the findings of 17 clinical trials conducted between 1921 and 1940, phage therapy was effective (OR = 0.21, 95% CI = 0.10 to 0.44, P value < 0.0001). The current study includes a topic review on modern clinical trials; four could be analyzed, indicating a noneffective therapy (OR = 2.84, 95% CI = 1.53 to 5.27, P value = 0.0009). The results suggest phage therapy was surprisingly less effective than standard treatments in resolving bacterial infections. However, the results were affected by the small sample set size. This work also contextualizes the development of phage therapy in the early 20th century and highlights the expansion of phage applications in the last few years. In conclusion, the current review shows phage therapy is no longer an underestimated tool in the treatment of bacterial infections.

Natural Piezoelectric Biomaterials: A Biocompatible and Sustainable Building Block for Biomedical Devices

The piezoelectric effect has been widely observed in biological systems, and its applications in biomedical field are emerging. Recent advances of wearable and implantable biomedical devices bring promise as well as requirements for the piezoelectric materials building blocks. Owing to their biocompatibility, biosafety, and environmental sustainability, natural piezoelectric biomaterials are known as a promising candidate in this emerging field, with a potential to replace conventional piezoelectric ceramics and synthetic polymers. Herein, we provide a thorough review of recent progresses of research on five major types of piezoelectric biomaterials including amino acids, peptides, proteins, viruses, and polysaccharides. Our discussion focuses on their structure- and phase-related piezoelectric properties and fabrication strategies to achieve desired piezoelectric phases. We compare and analyze their piezoelectric performance and further introduce and comment on the approaches to improve their piezoelectric property. Representative biomedical applications of this group of functional biomaterials including energy harvesting, sensing, and tissue engineering are also discussed. We envision that molecular-level understanding of the piezoelectric effect, piezoelectric response improvement, and large-scale manufacturing are three main challenges as well as research and development opportunities in this promising interdisciplinary field.

M13 bacteriophage as biometric component for orderly assembly of dynamic light scattering immunosensor

The ordered assembly of nanostructure is an effective strategy used to manipulate the hydrodynamic diameter (D_H) of nanoparticles. Herein, a versatile dynamic light scattering (DLS) immunosensing platform is presented to sensitively detect small molecules and biomacromolecules by using the M13 phage as the building module to order the assembly of gold nanoflowers and gold-coated magnetic nanoparticles, respectively. After the directional assembly of M13 phage, the D_H of the probes was significantly increased due to its larger filamentous structure, thus improving the detection sensitivity of the DLS immunosensor. The designed M13 assembled DLS immunosensor with competitive and sandwich formats showed high sensitivities for ochratoxin A and alpha-fetoprotein in real corn and undiluted serum samples, with the detection limits of 1.37 and 57 pg/mL, respectively. These values are approximately 15.8 and 164.9 times lower than those of traditional phage-based enzyme-linked immunosorbent assays. Collectively, this work provides a promising strategy to manipulate the D_H of nanoparticles by highly evolved biomaterials such as engineered M13 phages and opens upon a new direction for developing DLS immunosensors to detect various targets by the fusion expression of special peptide or nanobody on the pIII or pVIII protein of M13 phage.

Physics-Guided Neural-Network-Based Inverse Design of a PhotonicPlasmonic Nanodevice for Superfocusing

Controlling the nanoscale light-matter interaction using superfocusing hybrid photonic-plasmonic devices has attracted significant research interest in tackling existing challenges, including converting efficiencies, working bandwidths, and manufacturing complexities. With the growth in demand for efficient photonic-plasmonic input-output interfaces to improve plasmonic device performances, sophisticated designs with multiple optimization parameters are required, which comes with an unaffordable computation cost. Machine learning methods can significantly reduce the cost of computations compared to numerical simulations, but the input-output dimension mismatch remains a challenging problem. Here, we introduce a physics-guided two-stage machine learning network that uses the improved coupled-mode theory for optical waveguides to guide the learning module and improve the accuracy of predictive engines to 98.5%. A near-unity coupling efficiency with symmetry-breaking selectivity is predicted by the inverse design. By fabricating photonic-plasmonic couplers using the predicted profiles, we demonstrate that the excitation efficiency of 83% on the radially polarized surface plasmon mode can be achieved, which paves the way for super-resolution optical imaging.

Piezoelectric nanogenerators for personalized healthcare

The development of flexible piezoelectric nanogenerators has experienced rapid progress in the past decade and is serving as the technological foundation of future state-of-the-art personalized healthcare. Due to their highly efficient mechanical-to-electrical energy conversion, easy implementation, and self-powering nature, these devices permit a plethora of innovative healthcare applications in the space of active sensing, electrical stimulation therapy, as well as passive human biomechanical energy harvesting to third party power on-body devices. This article gives a comprehensive review of the piezoelectric nanogenerators for personalized healthcare. After a brief introduction to the fundamental physical science of the piezoelectric effect, material engineering strategies, device structural designs, and human-body centered energy harvesting, sensing, and therapeutics applications are also systematically discussed. In addition, the challenges and opportunities of utilizing piezoelectric nanogenerators for self-powered bioelectronics and personalized healthcare are outlined in detail.

The intrinsic piezoelectric properties of materials - a review with a focus on biological materials

Piezoelectricity, a linear electromechanical coupling, is of great interest due to its extensive applications including energy harvesters, biomedical, sensors, and automobiles. A growing amount of research has been done to investigate the energy harvesting potential of this phenomenon. Traditional piezoelectric inorganics show high piezoelectric outputs but are often brittle, inflexible and may contain toxic compounds such as lead. On the other hand, biological piezoelectric materials are biodegradable, biocompatible, abundant, low in toxicity and are easy to fabricate. Thus, they are useful for many applications such as tissue engineering, biomedical and energy harvesting. This paper attempts to explain the basis of piezoelectricity in biological and non-biological materials and research involved in those materials as well as applications and limitations of each type of piezoelectric material.

Piezoelectricity, a linear electromechanical coupling, is of great interest due to its extensive applications including energy harvesters, biomedical, sensors, and automobiles.

Enhancing Electrical Outputs of Piezoelectric Nanogenerators by Controlling the Dielectric Constant of ZnO/PDMS Composite

Structural optimizations of the piezoelectric layer in nanogenerators have been predicted to enhance the output performance in terms of the figure of merit. Here, we report the effect of dielectric constant on electrical outputs of piezoelectric nanogenerator using ZnO/PDMS composites with varied ZnO coverages. The dielectric constant of piezoelectric layers was adjusted from 3.37 to 6.75. The electrical output voltage of 9 mV was achieved in the nanogenerator containing the ZnO/PDMS composite with the dielectric constant of 3.46, which is an 11.3-fold enhancement compared to the value of the nanogenerator featuring the composite with high dielectric constants. Significantly, lowering the dielectric constant of the piezoelectric layer improves the electrical output performance of piezoelectric nanogenerators.

Fabrication and application of biocompatible nanogenerators

As a new sustainable energy source, ubiquitous mechanical energy has received great attention and was successfully harvested by different types of nanogenerators. Among them, biocompatible nanogenerators are of particular interests due to their potential for biomedical applications. In this review, we provide an overview of the recent achievements in the fabrication and application of biocompatible nanogenerators. The development process and working mechanism of nanogenerators are introduced. Different biocompatible materials for energy harvesting, such as amino acids, peptide, silk protein, and cellulose, are discussed and compared. We then discuss different applications of biocompatible nanogenerators. We conclude with the challenges and potential research directions in this emerging field.

Electric Field-Induced Polarization Responses of Noncentrosymmetric Crystalline Biopolymers in Different Frequency Regimes - A Case Study on Unidirectionally Aligned β-Chitin Crystals

A dielectric medium containing noncentrosymmetric domains can exhibit piezoelectric and second-harmonic generation (SHG) responses when an electric field is applied. Since many crystalline biopolymers have noncentrosymmetric structures, there has been a great deal of interest in exploiting their piezoelectric and SHG responses for electromechanical and electro-optic devices, especially owing to their advantages such as biocompatibility and low density. However, exact mechanisms or origins of such polarization responses of crystalline biopolymers remain elusive due to the convolution of responses from multiple domains with varying degrees of structural disorder or difficulty of ensuring the unidirectional alignment of noncentrosymmetric domains. In this study, we investigate the polarization responses of a noncentrosymmetric crystalline biopolymer, namely, unidirectionally aligned β-chitin crystals interspersed in the amorphous protein matrix, which can be obtained naturally from tubeworm Lamellibrachia satsuma (LS) tube. The mechanisms governing polarization responses in different dynamic regimes covering optical (>10¹³ Hz), acoustic/ultrasonic (10³-10⁵ Hz), and low (10^-2-10² Hz) frequencies are explained. Relationships between the polarization responses dominant in different frequencies are addressed. Also, electromechanical coupling responses, including piezoelectricity of the LS tube, are quantitatively discussed. The findings of this study can be applicable to other noncentrosymmetric crystalline biopolymers, elucidating their polarization responses.

2D-Molybdenum Disulfide-Derived Ion Source for Mass Spectrometry

Generation of current or potential at nanostructures using appropriate stimuli is one of the futuristic methods of energy generation. We developed an ambient soft ionization method for mass spectrometry using 2D-MoS₂, termed streaming ionization, which eliminates the use of traditional energy sources needed for ion formation. The ionic dissociation-induced electrokinetic effect at the liquid-solid interface is the reason for energy generation. We report the highest figure of merit of current generation of 1.3 A/m² by flowing protic solvents at 22 μL/min over a 1 × 1 mm² surface coated with 2D-MoS₂, which is adequate to produce continuous ionization of an array of analytes, making mass spectrometry possible. Weakly bound ion clusters and uric acid in urine have been detected. Further, the methodology was used as a self-energized breath alcohol sensor capable of detecting 3% alcohol in the breath.

Polysaccharides and proteins-based nanogenerator for energy harvesting and sensing: A review

Nanogenerator is a promising energy harvesting device that can scavenge tiny mechanical energy from the surrounding environment, and then convert it into electricity. Natural bio-polymers are the potential candidates for the design of nanogenerators due to their excellent characteristics like piezoelectricity, triboelectricity, non-toxicity, biocompatibility and biodegradability. Especially, nanogenerators using bio-sourced polymers as the core raw materials are suitable for wearable and implantable devices. In this review, major advancements in the sensing field of nanogenerators based on natural polysaccharides and proteins (cellulose, chitosan, alginate, agarose, starch, lignin, silk fibroin, collagen, gelatin, keratin, peptide, M13 bacteriophage, β-cyclodextrin, spider silk, etc.) are summarized. Also, challenges in the improvement of electric output performance, flexibility, anti-humidity and energy management for natural polymers based-nanogenerators are proposed. In the future, they will be applied in daily life as an alternative for traditional power source after addressing issues mentioned above.

Application of Bacteriophages in Nanotechnology

Bacteriophages (phages for short) are viruses, which have bacteria as hosts. The single phage body virion, is a colloidal particle, often possessing a dipole moment. As such, phages were used as perfectly monodisperse systems to study various physicochemical phenomena (e.g., transport or sedimentation in complex fluids), or in the material science (e.g., as scaffolds). Nevertheless, phages also execute the life cycle to multiply and produce progeny virions. Upon completion of the life cycle of phages, the host cells are usually destroyed. Natural abilities to bind to and kill bacteria were a starting point for utilizing phages in phage therapies (i.e., medical treatments that use phages to fight bacterial infections) and for bacteria detection. Numerous applications of phages became possible thanks to phage display-a method connecting the phenotype and genotype, which allows for selecting specific peptides or proteins with affinity to a given target. Here, we review the application of bacteriophages in nanoscience, emphasizing bio-related applications, material science, soft matter research, and physical chemistry.

Recent Structure Development of Poly(vinylidene fluoride)-Based Piezoelectric Nanogenerator for Self-Powered Sensor

As the internet of things (IoT) era approaches, various sensors, and wireless electronic devices such as smartphones, smart watches, and earphones are emerging. As the types and functions of electronics are diversified, the energy consumption of electronics increases, which causes battery charging and maintenance issues. The piezoelectric nanogenerator (PENG) received great attention as an alternative to solving the energy issues of future small electronics. In particular, polyvinylidene fluoride (PVDF) piezoelectric polymer-based PENGs are strong potential candidate with robust mechanical properties and a high piezoelectric coefficient. In this review, we summarize the recent significant advances of the development of PVDF-based PENGs for self-powered energy-harvesting systems. We discuss the piezoelectric properties of the various structures of PVDF-based PENGs such as thin film, microstructure, nanostructure, and nanocomposite.

Biomolecular Piezoelectric Materials: From Amino Acids to Living Tissues

Biomolecular piezoelectric materials are considered a strong candidate material for biomedical applications due to their robust piezoelectricity, biocompatibility, and low dielectric property. The electric field has been found to affect tissue development and regeneration, and the piezoelectric properties of biological materials in the human body are known to provide electric fields by pressure. Therefore, great attention has been paid to the understanding of piezoelectricity in biological tissues and its building blocks. The aim herein is to describe the principle of piezoelectricity in biological materials from the very basic building blocks (i.e., amino acids, peptides, proteins, etc.) to highly organized tissues (i.e., bones, skin, etc.). Research progress on the piezoelectricity within various biological materials is summarized, including amino acids, peptides, proteins, and tissues. The mechanisms and origin of piezoelectricity within various biological materials are also covered.

Degradable Piezoelectric Biomaterials for Wearable and Implantable Bioelectronics

Current bioelectronics are facing a paradigm shift from old-fashioned unrecyclable materials to green and degradable functional materials with desired biocompatibility. As an essential electromechanical coupling component in many bioelectronics, new piezoelectric materials are being developed with biodegradability, as well as desired mechanical and electromechanical properties for the next generation implantable and wearable bioelectronics. In this review, we provide an overview of the major advancements in biodegradable piezoelectric materials. Different natural (such as peptide, amino acids, proteins, cellulose, chitin, silk, collagen, and M13 phage) and synthetic piezoelectric materials (such as polylactic acid) are discussed to reveal the underlying electromechanical coupling mechanism at the molecular level, together with typical approaches to the alignment of orientation and polarization to boost their electromechanical performance. Meanwhile, in vivo and in vitro degradation manners of those piezoelectric materials are summarized and compared. Representative developments of typical electronic prototypes leveraging these materials are also discussed. At last, challenges toward practical applications are pointed out together with potential research opportunities that might be critical in this new materials research area.

Recent Advances in Organic Piezoelectric Biomaterials for Energy and Biomedical Applications

The past decade has witnessed significant advances in medically implantable and wearable devices technologies as a promising personal healthcare platform. Organic piezoelectric biomaterials have attracted widespread attention as the functional materials in the biomedical devices due to their advantages of excellent biocompatibility and environmental friendliness. Biomedical devices featuring the biocompatible piezoelectric materials involve energy harvesting devices, sensors, and scaffolds for cell and tissue engineering. This paper offers a comprehensive review of the principles, properties, and applications of organic piezoelectric biomaterials. How to tackle issues relating to the better integration of the organic piezoelectric biomaterials into the biomedical devices is discussed. Further developments in biocompatible piezoelectric materials can spark a new age in the field of biomedical technologies.

Recent Developments and Prospects of M13- Bacteriophage Based Piezoelectric Energy Harvesting Devices

Recently, biocompatible energy harvesting devices have received a great deal of attention for biomedical applications. Among various biomaterials, viruses are expected to be very promising biomaterials for the fabrication of functional devices due to their unique characteristics. While other natural biomaterials have limitations in mass-production, low piezoelectric properties, and surface modification, M13 bacteriophages (phages), which is one type of virus, are likely to overcome these issues with their mass-amplification, self-assembled structure, and genetic modification. Based on these advantages, many researchers have started to develop virus-based energy harvesting devices exhibiting superior properties to previous biomaterial-based devices. To enhance the power of these devices, researchers have tried to modify the surface properties of M13 phages, form biomimetic hierarchical structures, control the dipole alignments, and more. These methods for fabricating virus-based energy harvesting devices can form a powerful strategy to develop high-performance biocompatible energy devices for a wide range of practical applications in the future. In this review, we discuss all these issues in detail.

Vertically-aligned ZnO microrod for high-brightness light source

ZnO-microrod array with well-aligned orientation prepared on p-GaN template can be utilized to construct high-performance near-ultraviolet emitters due to desired high optical quality and well-defined geometries.