High-Resolution and Universal Visualization of Latent Fingerprints Based on Aptamer-Functionalized Core-Shell Nanoparticles with Embedded SERS Reporters

Ti3C2Tx MXene -facilitated non-selective trapping effect: Efficient SERS detection of exosomal PD-L1

Biosensors developed through a sandwich approach have demonstrated favorable detection performance for exosomal programmed cell death 1 ligand 1 (ExoPD-L1) detection. However, the reported PD-L1 antibodies, peptides, and aptamers utilized in these biosensors typically bind to the extracellular region, with overlapping binding sites that severely constrain the fabrication of biosensors. In this study, we present a simple approach to specifically identify and analyze ExoPD-L1 through the non-selective trapping effect of Ti3C2TX (X=-O, -F, -OH) MXene on exosomes via the formation of Ti-O-P complexation, and the selective capture of peptide-functionalized Au@MPBA (4-Mercaptophenylboronic acid) @SiO2 surface enhanced Raman scattering (SERS) tags on ExoPD-L1. The biosensor delivered a both hypersensitive and reliable performance in exosome detection with a low limit of detection (20.74 particles/mL) in the linear range of 102 to 5×106 particles/mL. Furthermore, the biosensor demonstrated excellent stability and interference resistance in detecting ExoPD-L1 in clinical serum samples, enabling the easy differentiation of breast cancer patients from healthy controls. This work provides new insights into the design of biosensors for exosome detection and can serve as a replicable template for sandwich immunoassay detection for other types of sensors, including but not limited to SERS.

Multiplex signal amplification strategy-based early-stage diagnosis of Parkinson's disease on a SERS-enabled LoC system

In this paper, a multiplex signal amplification strategy was developed for the determination of miR-214 and miR-221 on a surface-enhanced Raman scattering (SERS)-enabled lab-on-a-chip (LoC) system to realize the early-stage diagnosis of Parkinson's disease (PD). The gold nanobipyramids (GNBPs) with great monodispersity were functionalized with Raman reporter molecules and hairpin DNA 1, serving as the SERS nanotags. The presence of targets can initial the strand displacement amplification (SDA) reaction and the numerous short-stranded trigger DNA (tDNA) can be released under the action of polymerase and nicking enzyme. Then, the tDNA can trigger the catalytic hairpin assembly (CHA) event between the SERS nanotags and the capture nanoprobes (Magnetic beads (MBs) modified with hairpin DNA 2), resulting in the aggregation of GNBPs on the MBs surface. The multiplex signal amplification contributed by the SDA-CHA strategy and the magnet-induced aggregation effect can ultimately lead to the significant improvement of the detection sensitivity and the limit of detection (LOD) was low to aM level with reproducibility and specificity meanwhile. Furthermore, a MPTP-induced PD mice model was established to verify the practicability and the expression level of miR-214 and miR-221 at different stages analyzed with the LoC system was confirmed by qRT-PCR.

Dual-Color Photoluminescent Functionalized Nanoparticles for Static-Dynamic Anticounterfeiting and Encryption: First Collaboration of Spiropyran and Coumarin

Increasing the security of anticounterfeiting materials has been the most important challenge in recent years, and the development of dual-color photoluminescent inks with multi-level security, static/dynamic emission, and dynamic color change is an important solution to overcome this problem. In this study, the multi-functionalized copolymer nanoparticles containing different functional groups (with a concentration of 20 wt %), including ester, carboxylic acid, hydroxyl, epoxide, amide, and amine groups were synthesized successfully by the emulsion polymerization method. The results showed that the particle size and morphology of nanoparticles are affected by the polarity of functional groups. The prepared multi-functionalized copolymer nanoparticles were modified physically with spiropyran (photochromic and red fluorescence emission) and coumarin (cyan emission) derivatives to develop dual-color photoluminescent polymer nanoparticles with application in static-dynamic photoluminescent anticounterfeiting inks, which have multi-level security. The investigation of optical properties indicates that the kinetics of photochromism and photoluminescence properties of samples containing spiropyran is dependent on the local polarity on the surface of polymer nanoparticles. Hence, an increase in the polarity (functionalization with amide, carboxylic acid, and hydroxyl groups) has resulted in fast photochromism, high-intensity photoluminescence emission and increased the efficiency of the photoswitchable color change of emission from cyan to pink. Dual-color photoluminescent anticounterfeiting inks were prepared by mixing polymer nanoparticles containing spiropyran with polymer nanoparticles containing coumarin, in different ratios (1:1, 1:3, 1:5, 1:8, and 1:10). Obtained results showed that prepared samples have cyan emission under UV light of 254 nm (static mode), and a dynamic photoswitching of fluorescence emission from cyan to pink (as a function of irradiation time) was also observed under UV-light irradiation of 365 nm, which is well known as a dynamic mode of emission. The responsivity and intensity of dynamic photoluminescence emission are dependent on the local polarity of the surface functional groups, in which the samples based on amide functionalized copolymer nanoparticles displayed high-intensity emission in the static mode and high-intensity photoswitchable dual-color emission in the dynamic mode, in the case of all ratios of colloid solution mixtures. Printing security tags on cellulose paper by dual-color photoluminescent inks indicates advantages such as maximum printability, resolution, brightness, and static-dynamic photoluminescence emission with high intensity for inks based on amide functionalized nanoparticles. The static-dynamic dual-color photoluminescent anticounterfeiting ink with unique properties and multi-level security was reported for the first time by the collaboration of spiropyran and coumarin. This study can open a new approach and window to the future of advanced and high-security anticounterfeiting technologies.

Enhancing Detection Reproducibility of Surface-Enhanced Raman Scattering by Controlling Analytes under One Laser Spot

Surface-enhanced Raman scattering (SERS), as a sensitive analytical technique, is expected to be used for quantification of trace analytes. At the current stage, high detection reproducibility should be guaranteed for realizing quantification analysis of trace analytes. The main obstacle to achieving high detection reproducibility is the nonuniform distribution of analyte molecules on substrates, particularly, the "coffee-ring" effect introduced by the flow of solute to the pinning of the contact line. Herein, we report a method to tackle this problem by controlling the location of analytes through tuning the wettability of the SERS substrate. With the combination of silver-assisted chemical etching and photolithography, the ordered Si patterns grafted silver nanoparticles with tunable wettability were integrated into a SERS substrate. With this substrate, high detection reproducibility was achieved by confining all the analyte molecules on the area of active plasmonic hot-spots within one laser, and the quantitative analysis was realized with ultrahigh sensitivity. Furthermore, the substrate is applicable for high-throughput detection.

Recent Progress in Visualization and Analysis of Fingerprint Level 3 Features

Fingerprints provide sufficient and reliable discriminative characteristics which have been considered one of the most robust evidence for individualization. The limitation of current minutiae-based fingerprint technology seems to be solved with the development of level 3 features since they can offer additional information for problematic fingerprint recognition and even donor profiling. So far, tremendous efforts have been devoted to detecting and analysing the third-level details. This review summarizes the advances in level 3 details with an emphasis on their reliability assessment, visualization methods based on physical interaction, residue-response, mass spectrometry and electrochemical techniques, as well as the potentiality for individualization, donor profiling and even other application scenarios. In the end, we also give a personal perspective on the future direction and the remaining challenges in the third-level-detail-related field. We believe that the new exciting progress is expected in the development of level 3 detail detection and analysis with continued interest and attention to this field.

Tailoring noble metal nanoparticle designs to enable sensitive lateral flow immunoassay

Lateral flow immunoassay (LFIA) with gold nanoparticles (AuNPs) as signal reporters is a popular point-of-care diagnostic technique. However, given the weak absorbance of traditional 20-40 nm spherical AuNPs, their sensitivity is low, which greatly limits the wide application of AuNP-based LFIA. With the rapid advances in materials science and nanotechnology, the synthesis of noble metal nanoparticles (NMNPs) has enhanced physicochemical properties such as optical, plasmonic, catalytic, and multifunctional activity by simply engineering their physical parameters, including the size, shape, composition, and external structure. Using these engineered NMNPs as an alternative to traditional AuNPs, the sensitivity of LFIA has been significantly improved, thereby greatly expanding the working range and application scenarios of LFIA, particularly in trace analysis. Therefore, in this review, we will focus on the design of engineered NMNPs and their demonstration in improving LFIA. We highlight the strategies available for tailoring NMNP designs, the effect of NMNP engineering on their performance, and the working principle of each engineering design for enhancing LFIA. Finally, current challenges and future improvements in this field are briefly discussed.

Advances in Surface-Enhanced Raman Scattering-Based Aptasensors for Food Safety Detection

Owing to the excellent performances of high sensitivity, high specificity, on-site detection, and multiplexing capability, surface-enhanced Raman scattering (SERS)-based aptasensors have performed prosperous applications and gained impressive progress in food safety. Herein, we reviewed the SERS-based aptasensors from the principles to specific applications in food safety. First, the sensor-working principles, SERS label design and preparation are introduced. Then, the popular platforms in the aptasensors are summarized with their advantages and disadvantages, followed by their representative applications. Further, the specific applications of developing SERS-based aptasensors in food safety are systematically provided. Moreover, the multiplex analysis using SERS labels are highlighted. Finally, challenges and perspectives for improving the SERS-based aptasensor performance are also discussed, aiming to give some proposes for researchers to choose suitable SERS-based aptasensors according to specific applications.

Recent Progress of SERS Nanoprobe for pH Detecting and Its Application in Biological Imaging

As pH value almost affects the function of cells and organisms in all aspects, in biology, biochemical and many other research fields, it is necessary to apply simple, intuitive, sensitive, stable detection of pH and base characteristics inside and outside the cell. Therefore, many research groups have explored the design and application of pH probes based on surface enhanced Raman scattering (SERS). In this review article, we discussed the basic theoretical background of explaining the working mechanism of pH SERS sensors, and also briefly described the significance of cell pH measurement, and simply classified and summarized the factors that affected the performance of pH SERS probes. Some applications of pH probes based on surface enhanced Raman scattering in intracellular and extracellular pH imaging and the combination of other analytical detection techniques are described. Finally, the development prospect of this field is presented.

Recent Trends in Fluorescent Organic Materials for Latent Fingerprint Imaging

Fingerprints are an important kind of material evidence with the key function in personal identification, which are unique and life-long to everyone. Latent (invisible) fingerprints are common at the crime scene, needing to be visualized with proper methods in order to identify sources of the fingerprints in routine forensic practice. Fluorescent imaging of latent fingerprints has the advantage of high contrast, sensitivity, selectivity, and less dependency on instruments. Taking the environment and users' safety into consideration, organic materials for fluorescent imaging of latent fingerprints are reviewed mainly in recent 5 years. New strategies of fingerprint reagents and improved performances established for fingerprint development based on fluorescent organic materials are discussed in the view of forensic practice. In addition, we briefly highlight current challenges of recent fluorescent imaging works based on organic materials for the latent fingerprints development in forensic practice.

Enzyme activity-modulated etching of gold nanobipyramids@MnO2 nanoparticles for ALP assay using surface-enhanced Raman spectroscopy

The detection of enzyme activity can provide valuable insights into clinical diagnosis. Herein, we synthesize gold nanobipyramids@MnO2 nanoparticles (AMNS) as the surface-enhanced Raman spectroscopy (SERS) substrate for the first time and design a "turn-on" SERS strategy for the detection of enzyme activity without the need for a complicated SERS nanotag preparation process. In the presence of alkaline phosphatase (ALP), 2-phosphate-l-ascorbic acid trisodium salt (AAP) can be hydrolyzed to ascorbic acid (AA), which can etch the shell of AMNS by reducing MnO2 to Mn2+. The cracked MnO2 shell-caused electromagnetic field enhancement from AMNS can give rise to a significant increase in the Raman intensity of the adsorbed molecules (i.e., crystal violet, CV) on the surfaces of nanobipyramids. Thus, the ALP activity can be accurately quantified based on the MnO2 shell thickness dependent Raman signal output from CV. A linear dynamic range from 0.4 to 20 mU mL-1 with a detection limit of 0.04 mU mL-1 is achieved, which is more sensitive than other spectroscopic methods for ALP detection. Because of its advantages of sensitivity, convenience and versatility, this approach provides a new perspective to disease-related biomolecular detection in the future.

Surface modification of plasmonic noble metal-metal oxide core-shell nanoparticles

A comprehensive survey on the methods for the surface modification of plasmonic noble metal-metal oxide core-shell nanoparticles is presented. The review highlights various strategies for covalent attachment and electrostatic binding of molecules and molecular ions to core-shell nanoparticles with a focus on plasmonically active silver and gold nanoparticles encapsulated by SiO₂ and TiO₂ shells.

A portable oligonucleotide-based microfluidic device for the detection of VEGF165 in a three-step suspended-droplet mode

Vascular endothelial growth factor (VEGF165), an important glycosylated protein from the VEGF family, is a type of signal protein highly associated with the development and progression of cancers. In this work, we designed a G-quadruplex-based aptasensing platform for the sensitive and selective detection of VEGF165 in aqueous solution and red blood cell solution. A long-lived phosphorescence iridium(iii) complex (1) with promising photophysical properties and a large Stokes shift was chosen as a selective G-quadruplex probe. The platform could achieve a limit of detection (LOD) down to the picomolar level using a conventional fluorometer. Furthermore, we successfully applied the platform to a three-step suspended droplet (SD)-based microfluidic device for the monitoring of VEGF165. In contrast to the channel-based and digital microfluidic chips, SD-based chips allow easy introduction of liquid samples, valve-free manipulation of multiple reaction steps and flexible volume range. Importantly, polypropylene (PP), a hydrophobic and thermally stable material, was chosen as a substrate to fabricate the chip for the SD-based microfluidic device. The PP-based chip allows the combination of superhydrophobic force, gravity and surface tension for effective driving of the suspended droplet throughout the channel without reverse migration. After assembling all the major components, including a UV lamp, a rotatable chip holder, a filter and a camera into the portable device, we successfully demonstrated the applicability of the device to detect VEGF165 in aqueous solution with a LOD of 0.33 nM at a signal-to-noise ratio (S/N) of 3 and a linear range of 1-100 nM.

Smart Responsive Luminescent Aptamer-Functionalized Covalent Organic Framework Hydrogel for High-Resolution Visualization and Security Protection of Latent Fingerprints

Covalent organic frameworks (COFs) have been proposed as alternative candidates for "smart" materials due to their ordered π-columnar structures. However, it remains a challenge to develop external-stimuli-responsive luminescent COFs for confidential information protection. Here, we have designed and synthesized a water-dispersible and smart responsive luminescent carboxymethyl cellulose-COF hydrogel encapsulated 5-(dimethylamino)-N,N-bis (pyridin-2-ylmethyl) napthalene-1-sulfonamide, named CMC-COF-LZU1⊃DPYNS, for latent fingerprint imaging and encryption. We show that the fluorescence of CMC-COF-LZU1⊃DPYNS is reversibly switchable upon addition of Cu²⁺/H₂O. This effect endows potential applications of tunable luminescent COFs based hydrogel as an invisible security probe for imaging, recording, storage, and security of latent fingerprint information. It is shown that the latent fingerprint information incubated by the aptamer-functionalized CMC-COF-LZU1⊃DPYNS hydrogel is invisible in the presence of Cu²⁺, but three levels of fingerprint features with high-resolution patterns could be readable upon addition of H₂O under UV light. The design strategy provides a promising platform for the development of smart responsive luminescent COFs and their detection and protection of valuable latent fingerprint information.

Research Progress of M13 Bacteriophage-Based Biosensors

Recently, new virus-based sensor systems that operate on M13 bacteriophage infrastructure have attracted considerable attention. These systems can detect a range of chemicals with excellent sensitivity and selectivity. Filaments consistent with M13 bacteriophages can be ordered by highly established forms of self-assembly. This allows M13 bacteriophages to build a homogeneous distribution and infiltrate the network structure of nanostructures under mild conditions. Phage display, involving the genetic engineering of M13 bacteriophages, is another strong feature of the M13 bacteriophage as a functional building block. The numerous genetic modification possibilities of M13 bacteriophages are clearly the key features, and far more applications are envisaged. This paper reviews the recent progress in the application of the M13 bacteriophage self-assembly structures through to sensor systems and discusses future M13 bacteriophage technology.

Surface-Nanostructured Single Silver Nanowire: A New One-Dimensional Microscale Surface-Enhanced Raman Scattering Interface

One-dimensional microscale surface-enhanced Raman scattering (SERS)-active interfaces have been intriguing as a newly emerging class of SERS interfaces compared to conventional macroscale SERS substrates. In this work, a stable surface-nanostructured single silver nanowire was fabricated. The nanostructures on the nanowire are formed by nanoscale silver crystal dots with diameters of 20-50 nm. The SERS signals of the crystal violet probe molecules adsorbed on the nanostructures are dramatically enhanced by both electromagnetic and chemical effects. The hot spots generated at the junctions of adjacent nanoscale dots yield highly efficient surface plasmon resonance. Simultaneously, the charge transfer on the atomic-scale silver cluster located at the nanostructured interface causes an enhancement similar to Raman resonance. The intensity distributions of the SERS peaks on the surface-nanostructured single nanowire are characterized by SERS mapping. It is found that, although the intensities of the SERS peaks are different, their SERS mapping images show uniform SERS enhancement distributions, whereas the noticeable SERS intensity distributions on the single smooth silver nanowire are mainly located on the two ends of the nanowire. A large number of nanoscale crystal dots along with the atomic-scale silver clusters are uniformly and densely distributed on the surface of the single roughened nanowire; these structural attributes induce a uniform and large surface plasmon resonance and charge transfer enhancements on the entire surface of the nanowire. This work indicates that the surface-nanostructured single silver nanowire, synthesized using a quite simple preparation method, performs as an excellent one-dimensional microscale SERS substrate with uniform and high enhancement characteristics, which shows high potential for applications as a new class of SERS-active substrates. Furthermore, the higher enhancement factor of the microscale SERS interfaces can be achieved by introducing other roughened nanowires to assemble a dimer and a trimer as micro-SERS substrates, which is consistent with the dark-field measurements.

Recent advances in the chemical imaging of human fingermarks (a review)

This review highlights the considerable advances in the chemical imaging of human fingermarks that provide more chemical information, including numerous endogenous and exogenous constituents. Despite remarkable development in DNA analysis and recognition, human fingermark analysis remains one of the priority approaches available for obtaining reliable forensic evidence. Additional information about the donor can be obtained from the chemical composition of latent fingermarks in addition to the ridge pattern, such as the age, gender, medical history, and possible drug habits. The analytical approaches reviewed here include spectroscopy, mass spectrometry, immuno-labelling and electrochemical methods. Each method has different capabilities with respect to sensitivity, reproducibility, selectivity, reliability and ultimately applicability, either for use in routine forensic practice or in academic research work. The advantages of spectroscopic techniques, including infrared, Raman and micro-X-ray fluorescence spectroscopy, are the capabilities of a rapid and non-destructive imaging of fingermarks by providing spectral information on chemical composition. In addition, mass spectrometry imaging can provide spatially specific information on fingermark chemical composition. Recently, the use of immuno-labelling in latent fingermark detection has attracted significant attention because it can overcome the sensitivity and selectivity problems experienced with other existing methods. The electrochemical method has also been employed to image latent fingermarks by measuring the electric current changes with the spatial chemical composition from the ridges and valleys at high resolution to provide a third level of detail, which is especially useful for multicoloured background surfaces or for surfaces contaminated with blood or other bodily fluids.

Color-Tunable Binuclear (Eu, Tb) Nanocomposite Powder for the Enhanced Development of Latent Fingerprints Based on Electrostatic Interactions

Fluorescence color of rare earth-based nanopowder can be modulated by regulating the molar ratio of components, which offers a promising strategy in many fields of applications. Herein, a series of binuclear Eu _xTb_{1- x}(AA)₃Phen ( x = 1, 0.75, 0.5, 0.25, 0.1, 0) complexes were fabricated using acrylic acid (AA) as the first ligand and using 1,10-phenanthroline (Phen) as the second ligand. The characterization results showed that this novel binuclear (Eu, Tb) complex can emit strong red or green light via simply varying the molar ratio of europium and terbium. Moreover, the results of spectroscopic and zeta potential analyses suggested that there was an electrostatic adherence mode in the interaction between the Eu _xTb_{1- x}(AA)₃Phen complex and fingerprint residues. Importantly, our Eu _xTb_{1- x}(AA)₃Phen nanopowder was successfully applied to the enhanced development of latent fingerprints on various surfaces by the powder dusting method, exhibiting a high contrast, sensitivity, and selectivity, as well as a low detection limit in forensic science, which was further confirmed by analysis with an automatic fingerprint identification system. In summary, our synthetic rare earth-based nanopowder exhibits promise as an ideal fluorescent probe for the enhanced development of latent fingerprints, based not only on physical absorption at the macrolevel but also on electrostatic interactions between our rare earth complex and fingerprint residues at the molecular level, which could provide an enhanced affinity compared with traditional fingerprint powders.

Covalent Organic Polymers for Rapid Fluorescence Imaging of Latent Fingerprints

Rapid, simple and highly sensitive identification of latent fingerprints (LFPs) is an important issue related to national security and recognition of potential crimes. Here, we synthesize a series of covalent organic polymers (COPs) with colorful fluorescence (from blue to green, pale yellow, bright yellow, and red) and further investigate their performance for fluorescence imaging of LFPs. Results indicate that the COP materials can be used as fluorescence probes to rapidly visualize the precision substructure of LFPs within 5 s by simply spraying method, and tunable fluorescent color makes the COP probes have a high contrast and low interference for fluorescence imaging of LFPs on different substrates (including glass slides, paper, aluminum foil, plastic, ironware) in different backgrounds. We also further reveal the mechanism of COP probes for fluorescence imaging of LFPs. Importantly, the COP probes show high stability and could successfully achieve the fluorescence imaging for LFPs after aged for 45 days or washed by water. In short, this is the first report on the porous polymers for fluorescence imaging of LFPs and expected that it can be also applied to the fluorescence imaging of other fields.

Reversible Response of Luminescent Terbium(III)-Nanocellulose Hydrogels to Anions for Latent Fingerprint Detection and Encryption

Fingerprint fluorescence imaging has become one of the most prominent technologies in the field of forensic medicine, but it seldom considers the security protection of detection information, which is of great importance in modern society. Herein we demonstrate that luminescent Tb^III -carboxymethyl cellulose (CMC) complex binding aptamer hydrogels that are reversibly responsive to ClO^- /SCN^- can be used for the selective detection, protection, and storage of fingerprint information. The imaging information of the fingerprint can be quenched and recovered by ClO^- /SCN^- regulation, respectively, resulting in reversible on/off conversion of the luminescence signals for the encryption and decryption of multiple levels of information. The present study opens new avenues for multilevel imaging, data recording, and security protection of fingerprint information with tunable fluorescent hydrogels.

M13 Bacteriophage/Silver Nanowire Surface-Enhanced Raman Scattering Sensor for Sensitive and Selective Pesticide Detection

A surface-enhanced Raman scattering (SERS) sensor comprising silver nanowires (AgNWs) and genetically engineered M13 bacteriophages expressing a tryptophan-histidine-tryptophan (WHW) peptide sequence (BPWHW) was fabricated by simple mixing of BPWHW and AgNW solutions, followed by vacuum filtration onto a glass-fiber filter paper (GFFP) membrane. The AgNWs stacked on the GFFP formed a high density of SERS-active hot spots at the points of nanowire intersections, and the surface-coated BPWHW functioned as a bioreceptor for selective pesticide detection. The BPWHW-functionalized AgNW (BPWHW/AgNW) sensor was characterized by scanning electron microscopy, confocal scanning fluorescence microscopy, atomic force microscopy, and Fourier transform infrared spectroscopy. The Raman signal enhancement and the selective pesticide SERS detection properties of the BPWHW/AgNW sensor were investigated in the presence of control substrates such as wild-type M13 bacteriophage-decorated AgNWs (BPWT/AgNW) and undecorated AgNWs (AgNW). The BPWHW/AgNW sensor exhibited a significantly higher capture capability for pesticides, especially paraquat (PQ), than the control SERS substrates, and it also showed a relatively higher selectivity for PQ than for other bipyridylium pesticides such as diquat and difenzoquat. Furthermore, as a field application test, PQ was detected on the surface of PQ-pretreated apple peels, and the results demonstrated the feasibility of using a paper-based SERS substrate for on-site residual pesticide detection. The developed M13 bacteriophage-functionalized AgNW SERS sensor might be applicable for the detection of various pesticides and chemicals through modification of the M13 bacteriophage surface peptide sequence.

SiO2@LaOF:Eu3+ core-shell functional nanomaterials for sensitive visualization of latent fingerprints and WLED applications

For the first time, intense red color composite of SiO₂@LaOF:Eu³⁺ core-shell nanostructures (NS) were fabricated via facile solvothermal method followed by thermal treatment. The obtained core-shell particles display better spherical shape and non-agglomeration with a narrow size distribution. Photoluminescence (PL) emission spectra exhibits intense peaks at ∼593 nm, 611 nm, 650 nm corresponds to ⁵D₀ → ⁷F_J (J = 0, 1 and 2) Eu³⁺ transitions respectively. The spectral intensity parameters and Eu-O ligand behaviors are estimated by means of Judd-Ofelt (J-O) theory. CIE co-ordinates are found to be (x = 0.63, y = 0.36) which is very close to standard NTSC values (x = 0.67, y = 0.33). CCT value is ∼3475 K which is less than 5000 K, as a result this phosphor is suitable for warm light emitting diodes. The optimized core-shell SiO₂ (coat III)@LaOF:Eu³⁺ (5 mol%) was used as a fluorescent labeling marker for the visualization of latent fingerprints on both porous and non-porous surfaces. Obtained fingerprints are highly sensitive and selective also no background hindrance which enables level-I to level-III fingerprint ridge characteristics. Observed results indicate that the significant improvement in luminescence of coreshell NS can be explored as a sensitive functional nanopowder for advanced forensic and solid state lightning applications.

Surface enhanced Raman scattering (SERS) based biomicrofluidics systems for trace protein analysis

In recent years, Surface Enhanced Raman Scattering (SERS) has been widely applied to many different areas, including chemical analysis, biomolecule detection, bioagent diagnostics, DNA sequence, and environmental monitor, due to its capabilities of unlabeled fingerprint identification, high sensitivity, and rapid detection. In biomicrofluidic systems, it is also very powerful to integrate SERS based devices with specified micro-fluid flow fields to further focusing/enhancing/multiplexing SERS signals through molecule registration, concentration/accumulation, and allocation. In this review, after a brief introduction of the mechanism of SERS detection on proteins, we will first focus on the effectiveness of different nanostructures for SERS enhancement and light-to-heat conversion in trace protein analysis. Various protein molecule accumulation schemes by either (bio-)chemical or physical ways, such as immuno, electrochemical, Tip-enhanced Raman spectroscopy, and magnetic, will then be reviewed for further SERS signal amplification. The analytical and repeatability/stability issues of SERS detection on proteins will also be brought up for possible solutions. Then, the comparison about various ways employing microfluidic systems to register, concentrate, and enhance the signals of SERS and reduce the background noise by active or passive means to manipulate SERS nanostructures and protein molecules will be elaborated. Finally, we will carry on the discussion on the challenges and opportunities by introducing SERS into biomicrofluidic systems and their potential solutions.

Surface-enhanced Raman spectroscopic identification in fingerprints based on adhesive Au nanofilm

The visualization and acquisition of information on substances within fingerprints have attracted considerable interest owing to their practical application in forensic science. There are still some challenges in the transfer and imaging of fingerprints and the extraction of residues. Here, a facile approach was successfully developed for transferring and recovering the pattern of fingerprints, which is based on surface-enhanced Raman spectroscopy (SERS) and an adhesive Au nanofilm (ANF). The reproducibility of SERS effects and the adhesive quality of the ANF enabled the transfer, recovery of the pattern and extraction of chemical residues from living/latent fingerprints. The results demonstrated that the pattern of living fingerprints, including ridges, furrows and sweat pores, was recovered on the basis of SERS mapping of the vibrational band of amino acids from endogenous protein substances. The dye rhodamine 6G (R6G) was employed as a developing agent to enhance the visualization of fingerprints by SERS mapping of the band at 1360 cm⁻¹. Moreover, exogenous residues, such as cotinine (COT) and methylene blue (MB), were also detected by SERS. Their distribution in fingerprints was also determined, although it was not associated with the pattern of fingerprints. This indicated that the extraction process based on the adhesive ANF could be applied to transfer fingerprints from a crime scene to the laboratory for precise identification via structural information on chemical residues and the pattern image of fingerprints. It is anticipated that the adhesive ANF when combined with an ultrahigh-sensitivity SERS technique could be developed as a promising tool for the visualization of fingerprints and monitoring of trace chemical residues for crime tracking in forensic science.

A facial approach was developed successfully for transferring and recovering the pattern of fingerprints based on surface enhanced Raman spectroscopy and adhesive Au nanofilm.

Selectivity/Specificity Improvement Strategies in Surface-Enhanced Raman Spectroscopy Analysis

Surface-enhanced Raman spectroscopy (SERS) is a powerful technique for the discrimination, identification, and potential quantification of certain compounds/organisms. However, its real application is challenging due to the multiple interference from the complicated detection matrix. Therefore, selective/specific detection is crucial for the real application of SERS technique. We summarize in this review five selective/specific detection techniques (chemical reaction, antibody, aptamer, molecularly imprinted polymers and microfluidics), which can be applied for the rapid and reliable selective/specific detection when coupled with SERS technique.

Interfacial Separation-Enabled All-Dry Approach for Simultaneous Visualization, Transfer, and Enhanced Raman Analysis of Latent Fingerprints

It is of essential importance to visualize latent fingerprint (LFP) and analyze the compounds therein. For this purpose, various approaches have been developed but suffer from low imaging and/or detection efficiency. Most importantly, most of them require a necessary in-solution process and thus are not applicable to LFPs on bulky or water-sensitive substrates. In this work, we report an all-dry method to achieve simultaneous visualization and transfer of LFP and enhanced Raman analysis of multiple species therein. In this innovative approach, polydopamine (PDA) film-coated poly(dimethylsiloxane) (PDMS) flake with dense plasmonic silver nanoparticles (AgNPs@PDA@PDMS) was applied to cover the substrate carrying LFP. After gentle separation, the AgNPs@PDA film was transferred from PDMS to the LFP ridges to visualize a positive LFP pattern on the substrate, leaving behind a complementary (negative) LFP pattern on the PDMS flake. The compounds in the LFP were further analyzed via the AgNP-enhanced Raman technique. This approach enables high-contrast and full-feature visualization and transfer of LFP on arbitrary nonporous substrates and facilitates sensitive Raman analysis of multiple species in the sweat and thus promises great potential for practical applications.

Leakage-free polypyrrole–Au nanostructures for combined Raman detection and photothermal cancer therapy

A novel PPy–Au nanostructure with the bifunctionality of Raman detection and photothermal therapy of cancer is reported.

Nanoarchitecture Based SERS for Biomolecular Fingerprinting and Label-Free Disease Markers Diagnosis

Surface-enhanced Raman spectroscopy (SERS) fingerprinting is highly promising for identifying disease markers from complex mixtures of clinical sample, which has the capability to take medical diagnoses to the next level. Although vibrational frequency in Raman spectra is unique for each biomolecule, which can be used as fingerprint identification, it has not been considered to be used routinely for biosensing due to the fact that the Raman signal is very weak. Contemporary SERS has been demonstrated to be an excellent analytical tool for practical label-free sensing applications due its ability to enhance Raman signals by factors of up to 10⁸–10¹⁴ orders of magnitude. Although SERS was discovered more than 40 years ago, its applications are still rare outside the spectroscopy community and it is mainly due to the fact that how to control, manipulate and amplify light on the “hot spots” near the metal surface is in the infancy stage.

In this Account, we describe our contribution to develop nanoachitecture based highly reproducible and ultrasensitive detection capability SERS platform via low-cost synthetic routes. Using one-dimensional (1D) carbon nanotube (CNT), two-dimensional (2D) graphene oxide (GO), and zero-dimensional (0D) plasmonic nanoparticle, 0D to 3D SERS substrates have been designed, which represent highly powerful platform for biological diagnosis. We discuss the major design criteria we have used to develop robust SERS substrate to possess high density “hot spots” with very good reproducibility. SERS enhancement factor for 3D SERS substrate is about 5 orders of magnitude higher than only plasmonic nanoparticle and more than 9 orders of magnitude higher than 2D GO. Theoretical finite-difference time-domain (FDTD) stimulation data show that the electric field enhancement |E|² can be more than 2 orders of magnitude in “hot spots”, which suggests that SERS enhancement factors can be greater than 10⁴ due to the formation of high density “hot spots” in 3D substrate. Next, we discuss the utilization of nanoachitecture based SERS substrate for ultrasensitive and selective diagnosis of infectious disease organisms such as drug resistance bacteria and mosquito-borne flavi-viruses that cause significant health problems worldwide. SERS based “whole-organism fingerprints” has been used to identify infectious disease organisms even when they are so closely related that they are difficult to distinguish. The detection capability can be as low as 10 CFU/mL for methicillin-resistant Staphylococcus aureus (MRSA) and 10 PFU/mL for Dengue virus (DENV) and West Nile virus (WNV). After that, we introduce exciting research findings by our group on the applications of nanoachitecture based SERS substrate for the capture and fingerprint detection of rotavirus from water and Alzheimer’s disease biomarkers from whole blood sample. The SERS detection limit for β-amyloid (Aβ proteins) and tau protein using 3D SERS platform is several orders of magnitude higher than the currently used technology in clinics. Finally, we highlight the promises, major challenges and prospect of nanoachitecture based SERS in biomedical diagnosis field.