Engineering Self-Adhesive Polyzwitterionic Hydrogel Electrolytes for Flexible Zinc-Ion Hybrid Capacitors with Superior Low-Temperature Adaptability

Multifunctional Zincophilic Hydrogel Electrolyte with Abundant Hydrogen Bonds for Zinc-Ion Capacitors and Supercapacitors

The new-generation flexible Zn-ion capacitors (ZICs) require multifunctionality and environmental adaptability for practical applications. This essentially means that hydrogel electrolytes are expected to possess superior mechanical properties, temperature resistance, and tunable interface properties to resist flexibility loss and performance degradation over a wide operating temperatures range. Herein, a multifunctional polyzwitterionic hydrogel electrolyte (PAM/LA/PSBMA) with wide operating temperatures, excellent tensile ability, high water retention, and self-adhesion is designed. Molecular dynamics simulations and experimental results show that polar functional groups (-COO-, -SO3-, -C═O, and -NHCO-) in the hydrogel can form abundant hydrogen bonds with water molecules, which can destroy the original hydrogen bonds (HBs) network between the water molecules and have a low freezing point. It can also form coordination with Zn2+, so that the deposition of Zn2+ electric field homogenization effectively alleviates the growth of Zn dendrites. On this basis, the constructed Zn//Zn cell can be stably cycled 290 h at 10 mA cm-2 (1 mA h cm-2). The constructed ZICs and supercapacitor have a high specific capacitance, excellent energy density, good ionic conductivity, and long cycling stability. This study provides guidance on molecular design for the development of integrated multifunctional smart electronic devices that are environmentally adaptable, resistant to drying, and highly flexible.

Molecular Engineering Enables Hydrogel Electrolyte with Ionic Hopping Migration and Self-Healability toward Dendrite-Free Zinc-Metal Anodes

Hydrogel electrolytes (HEs), characterized by intrinsic safety, mechanical stability, and biocompatibility, can promote the development of flexible aqueous zinc-ion batteries (FAZIBs). However, current FAZIB technology is severely restricted by the uncontrollable dendrite growth arising from undesirable reactions between the HEs with sluggish ionic conductivity and Zn metal. To overcome this challenge, this work proposes a molecular engineering strategy, which involves the introduction of oxygen-rich poly(urea-urethane) (OR-PUU) into polyacrylamide (PAM)-based HEs. The OR-PUU/PAM HEs facilitate rapid ion transfer through their ionic hopping migration mechanism, resulting in uniform and orderly Zn2+ deposition. The abundant polar groups on the OR-PUU molecules in OR-PUU/PAM HEs break the inherent H-bond network, tune the solvation structure of hydrated Zn2+, and inhibit the occurrence of side reactions. Moreover, the interaction of hierarchical H-bonds in the OR-PUU/PAM HEs endows them with self-healability, enabling in situ repair of cracks induced by plating/stripping. Consequently, Zn symmetric cells incorporating the novel OR-PUU/PAM HEs exhibit a long cycling life of 2000 h. The resulting Zn-MnO2 battery displays a low capacity decay rate of 0.009% over 2000 cycles at 2000 mA g-1. Overall, this work provides valuable insights to facilitate the realization of dendrite-free Zn-metal anodes through the molecular engineering of HEs.

Anti-Freezing and Ultrasensitive Zwitterionic Betaine Hydrogel-Based Strain Sensor for Motion Monitoring and Human-Machine Interaction

Ultrasensitive and reliable conductive hydrogels are significant in the construction of human-machine twinning systems. However, in extremely cold environments, freezing severely limits the application of hydrogel-based sensors. Herein, building on biomimetics, a zwitterionic hydrogel was elaborated for human-machine interaction employing multichemical bonding synergies and experimental signal analyses. The covalent bonds, hydrogen bonds, and electrostatic interactions construct a dense double network structure favorable for stress dispersion and hydrogen bond regeneration. In particular, zwitterions and ionic conductors maintained excellent strain response (99 ms) and electrical sensitivity (gauge factor = 14.52) in the dense hydrogel structure while immobilizing water molecules to enhance the weather resistance (-68 °C). Inspired by the high sensitivity, zwitterionic hydrogel-based strain sensors and remote-control gloves were designed by analyzing the experimental signals, demonstrating promising potential applications within specialized flexible materials and human-machine symbiotic systems.

Extending Cycling Life Beyond 300 000 Cycles in Aqueous Zinc Ion Capacitors Through Additive Interface Engineering

Developing low-cost and long-cycling-life aqueous zinc (Zn) ion capacitors (AZICs) for large-scale electrochemical energy storage still faces the challenges of dendritic Zn deposition and interfacial side reactions. Here, an interface engineering strategy utilizing a dibenzenesulfonimide (BBI) additive is employed to enhance the stability of the Zn metal anode/electrolyte interface. The first-principles calculation results demonstrate that BBI anions can be chemically adsorbed on Zn metal. Meanwhile, the experimental results confirm that the BBI-Zn interfacial layer converts the original water-richelectric double layer (EDL) into a water-poor EDL, effectively inhibiting the water related parasitic reaction at the electrode/electrolyte interface. In addition, the BBI-Zn interfacial layer introduces an additional Zn ions (Zn2+) migration energy barrier, increasing the Zn2+ de-solvation activation energy, consequently raising the Zn2+ nucleation overpotential, and thus achieving the compact and uniform Zn deposition behavior. Furthermore, the solid electrolyte interphase (SEI) layer derived from the BBI-Zn interfacial layer during cycling can further maintain the interfacial stability of the Zn anode. Owing to the above favorable features, the assembled AZIC exhibits an ultra-long cycling life of over 300 000 cycles based on the additive engineering strategy, which shows application prospects in high-performance AZICs.

Zn Anode Surviving Extremely Corrosive Polybromide Environment with Alginate-Graphene Oxide Hydrogel Coating

Zinc-bromine (Zn-Br) redox provides a high energy density and low-cost option for next-generation energy storage systems, and polybromide diffusion remains a major issue leading to Zn anode corrosion, dendrite growth, battery self-discharge and limited electrochemical performance. A dual-functional Alginate-Graphene Oxide (AGO) hydrogel coating is proposed to prevent polybromide corrosion and suppress dendrite growth in Zn-Br batteries through negatively charged carboxyl groups and enhanced mechanical properties. The battery with anode of plain zinc coated with AGO (Zn]AGO) survives a severely corrosive environment with higher polybromide concentration than usual without a membrane, and achieves 80 cycles with 100% Coulombic and 80.65% energy efficiencies, four times compared to plain Zn anode. The promising performance is comparable to typical Zn-Br batteries using physical membranes, and the AGO coating concept can be well adapted to various Zn-Br systems to promote their applications.

Rapid fabricated in-situ polymerized lignin hydrogel sensor with highly adjustable mechanical properties

Conductive hydrogels have been widely used as sensors owing to their tissue-like properties. However, the synthesis of conductive hydrogels with highly adjustable mechanical properties and multiple functions remains difficult to achieve yet highly needed. In this study, lignin hydrogel characterized by frost resistance, UV resistance, high conductivity, and highly adjustable mechanical properties without forming by-products was prepared through a rapid in-situ polymerization of acrylic acid/zinc chloride (AA/ZnCl2) aqueous solution containing lignin extract induced by the reversible quinone-catechol redox of the ZnCl2-lignin system at room temperature. Results revealed that the PAA/ZnCl2/lignin hydrogel exhibited mechanical properties with tensile stress (ranging from 0.08 to 3.28 MPa), adhesion to multiple surfaces (up to 62.05 J m-2), excellent frost resistance (-70-20 °C), UV resistance, and conductivity (0.967 S m-1), which further endow the hydrogel as potential strain and temperature sensor with wide monitor range (0-300 %), fatigue resistance, and quick response (70 ms for 150 % strain). This study proposed and developed a green, simple, economical, and efficient processing method for a hydrogel sensor in flexible wearable devices and man-machine interaction fields.

Poly(dehydroalanine)-Based Hydrogels as Efficient Soft Matter Matrices for Light-Driven Catalysis

Soft matter integration of photosensitizers and catalysts provides promising solutions to developing sustainable materials for energy conversion. Particularly, hydrogels bring unique benefits, such as spatial control and 3D-accessibility of molecular units, as well as recyclability. Herein, the preparation of polyampholyte hydrogels based on poly(dehydroalanine) (PDha) is reported. Chemically crosslinked PDha with bis-epoxy poly(ethylene glycol) leads to a transparent, self-supporting hydrogel. Due to the ionizable groups on PDha, this 3D polymeric matrix can be anionic, cationic, or zwitterionic depending on the pH value, and its high density of dynamic charges has a potential for electrostatic attachment of charged molecules. The integration of the cationic molecular photosensitizer [Ru(bpy)3 ]2+ (bpy = 2,2'-bipyridine) is realized, which is a reversible process controlled by pH, leading to light harvesting hydrogels. They are further combined with either a thiomolybdate catalyst ([Mo3 S13 ]2- ) for hydrogen evolution reaction (HER) or a cobalt polyoxometalate catalyst (Co4 POM = [Co4 (H2 O)2 (PW9 O34 )2 ]10- ) for oxygen evolution reaction (OER). Under the optimized condition, the resulting hydrogels show catalytic activity in both cases upon visible light irradiation. In the case of OER, higher photosensitizer stability is observed compared to homogeneous systems, as the polymer environment seems to influence decomposition pathways.

Sodium carboxymethyl cellulose and MXene reinforced multifunctional conductive hydrogels for multimodal sensors and flexible supercapacitors

With the growing demand for eco-friendly materials in wearable smart electronic devices, renewable, biocompatible, and low-cost hydrogels based on natural polymers have attracted much attention. Cellulose, as one of the renewable and degradable natural polymers, shows great potential in wearable smart electronic devices. Multifunctional conductive cellulose-based hydrogels are designed for flexible electronic devices by adding sodium carboxymethyl cellulose and MXene into polyacrylic acid networks. The multifunctional hydrogels possess excellent mechanical property (stress: 310 kPa; strain: 1127 %), toughness (206.67 KJ m-3), conductivity (1.09 ± 0.12 S m-1) and adhesion (82.19 ± 3.65 kPa). The multifunctional conductive hydrogels serve as strain sensors (Gauge Factor (GF) = 5.79, 0-700 % strain; GF = 14.0, 700-900 % strain; GF = 40.36, 900-1000 % strain; response time: 300 ms; recovery time: 200 ms) and temperature sensors (Temperature coefficient of resistance (TCR) = 2.5755 °C-1 at 35 °C- 60 °C). The sensor detects human activities with clear and steady signals. A distributed array of flexible sensors is created to measure the magnitude and distribution of pressure and a hydrogel-based flexible touch keyboard is also fabricated to recognize writing trajectories, pressures and speeds. Furthermore, a flexible hydrogel-based supercapacitor powers the LED and exhibits good cyclic stability over 15,000 charge-discharge cycles.

Hemostatic Tranexamic Acid-Induced Fast Gelation and Mechanical Reinforcement of Polydimethylacrylamide/Carboxymethyl Chitosan Hydrogel for Hemostasis and Wound Healing

The combinational properties with excellent mechanical properties, adhesive performance, hemostatic ability, antibacterial action, and wound healing efficacy are highly desirable for injectable hydrogels' practical applications in hemorrhage control and wound closure, but designing one single hydrogel system integrating with such properties is still difficult. Herein, a simplified yet straightforward strategy is proposed to prepare an injectable and robust poly(N,N-dimethylacrylamide) (PDMAA)/carboxymethyl chitosan (CMCS) hydrogel induced by tranexamic acid (TXA). TXA not only promotes the rapid generation of free radicals but also introduces multiple hydrogen bonds into the hydrogel network. Moreover, as a common clinical hemostatic drug, TXA itself has excellent hemostatic effects. In addition, CMCS imparts sterilization and hemostasis effects to the hydrogel, thereby promoting wound healing. Besides, the amino and carboxyl groups on TXA molecules and the hydroxyl, amino, and carboxyl groups on CMCS molecules can form multiple hydrogen bonds with wet biological tissues, leading to good wet tissue adhesion of the hydrogel. As a result, the hydrogel with excellent mechanical properties (up to 1.83 MPa at 90% compression strain), adhesion performance (up to 18.7 kPa adhesion strength to porcine skin tissue), biocompatibility, hemostatic ability, antibacterial activity, and wound healing properties can be fabricated within several minutes. These combinational advantages enable the hydrogel to efficiently stop hemorrhage (blood loss amount: 110 mg; hemostasis time: 25 s) and promote the wound healing process (wound closure rate at 2 weeks: 83%), which can be verified using rat models of liver bleeding and infected full thickness skin defect. Overall, this facile strategy to design a hydrogel incorporating such unique advantages will greatly advance the hydrogel's clinical application in rapid hemostasis and wound healing.

Highly Strong, Tough, and Cryogenically Adaptive Hydrogel Ionic Conductors via Coordination Interactions

Despite the promise of high flexibility and conformability of hydrogel ionic conductors, existing polymeric conductive hydrogels have long suffered from compromises in mechanical, electrical, and cryoadaptive properties due to monotonous functional improvement strategies, leading to lingering challenges. Here, we propose an all-in-one strategy for the preparation of poly(acrylic acid)/cellulose (PAA/Cel) hydrogel ionic conductors in a facile yet effective manner combining acrylic acid and salt-dissolved cellulose, in which abundant zinc ions simultaneously form strong coordination interactions with the two polymers, while free solute salts contribute to ionic conductivity and bind water molecules to prevent freezing. Therefore, the developed PAA/Cel hydrogel simultaneously achieved excellent mechanical, conductive, and cryogenically adaptive properties, with performances of 42.5 MPa for compressive strength, 1.6 MPa for tensile strength, 896.9% for stretchability, 9.2 MJ m-3 for toughness, 59.5 kJ m-2 for fracture energy, and 13.9 and 6.2 mS cm-1 for ionic conductivity at 25 and -70 °C, respectively. Enabled by these features, the resultant hydrogel ionic conductor is further demonstrated to be assembled as a self-powered electronic skin (e-skin) with high signal-to-noise ratio for use in monitoring movement and physiological signals regardless of cold temperatures, with hinting that could go beyond high-performance hydrogel ionic conductors.

Designing of zwitterionic proline hydrogel electrolytes for anti-freezing supercapacitors

Hydrogel electrolytes containing a large amount of freezable water tend to freeze at subzero temperatures, which catastrophically reduces their ionic conductivity and thus limits their practical applications. In this work, we propose a new type anti-freezing hydrogel electrolyte based on an additive of zwitterionic proline, which can maintain high ionic conductivities of hydrogel electrolytes at subzero temperatures. The unique zwitterionic structure leads to several interesting characters like strong hydration, strong ionic interactions and low self-associations, which is proved to be the keys for the high performance of hydrogel electrolytes under low temperatures. As a result, the proline hydrogel electrolytes show a high ionic conductivity of 4.2 mS cm-1 even at -40 °C. The activated carbon electrode of supercapacitors based on proline hydrogel electrolytes delivers high specific capacitances of 145.8 (at 0.5 A g-1) and 116.1 F g-1 (at 0.5 A g-1) at 25 and -30 °C, respectively. Furthermore, the specific capacitance still shows a high retention of 71% after 12,000 charge/discharge cycles at -30 °C, confirming the good low-temperature adaptability. Such anti-freezing electrolytes with high ionic conductivity will open up a new avenue for anti-freezing energy storage devices, not limited to supercapacitors.

Photoswitchable and Reversible Fluorescent Eutectogels for Conformal Information Encryption

Smart fluorescent materials that can respond to environmental stimuli are of great importance in the fields of information encryption and anti-counterfeiting. However, traditional fluorescent materials usually face problems such as lack of tunable fluorescence and insufficient surface-adaptive adhesion, hindering their practical applications. Herein, inspired by the glowing sucker octopus, we present a novel strategy to fabricate a reversible fluorescent eutectogel with high transparency, adhesive and self-healing performance for conformal information encryption and anti-counterfeiting. Using anthracene as luminescent unit, the eutectogel exhibits photoswitchable fluorescence and can therefore be reversibly written/erased with patterns by non-contact stimulation. Additionally, different from mechanically irreversible adhesion via glue, the eutectogel can adhere to various irregular substrates over a wide temperature range (-20 to 65 °C) and conformally deform more than 1000 times without peeling off. Furthermore, by exploiting surface-adaptive adhesion, high transparency and good stretchability of the eutectogel, dual encryption can be achieved under UV and stretching conditions to further improve the security level. This study should provide a promising strategy for the future development of advanced intelligent anti-counterfeiting materials.

Stretchable, Adhesive, and Biocompatible Hydrogel Based on Iron-Dopamine Complexes

Hydrogels' exceptional mechanical strength and skin-adhesion characteristics offer significant advantages for various applications, particularly in the fields of tissue adhesion and wearable sensors. Herein, we incorporated a combination of metal-coordination and hydrogen-bonding forces in the design of stretchable and adhesive hydrogels. We synthesized four hydrogels, namely PAID-0, PAID-1, PAID-2, and PAID-3, consisting of acrylamide (AAM), N,N'-methylene-bis-acrylamide (MBA), and methacrylic-modified dopamine (DA). The impact of different ratios of iron (III) ions to DA on each hydrogel's performance was investigated. Our results demonstrate that the incorporation of iron-dopamine complexes significantly enhances the mechanical strength of the hydrogel. Interestingly, as the DA content increased, we observed a continuous and substantial improvement in both the stretchability and skin adhesiveness of the hydrogel. Among the hydrogels tested, PAID-3, which exhibited optimal mechanical properties, was selected for adhesion testing on various materials. Impressively, PAID-3 demonstrated excellent adhesion to diverse materials and, combined with the low cytotoxicity of PAID hydrogel, holds great promise as an innovative option for biomedical engineering applications.

Hydrogel Electrolyte Enabled High-Performance Flexible Aqueous Zinc Ion Energy Storage Systems toward Wearable Electronics

To cater to the swift advance of flexible wearable electronics, there is growing demand for flexible energy storage system (ESS). Aqueous zinc ion energy storage systems (AZIESSs), characterizing safety and low cost, are competitive candidates for flexible energy storage. Hydrogels, as quasi-solid substances, are the appropriate and burgeoning electrolytes that enable high-performance flexible AZIESSs. However, challenges still remain in designing suitable and comprehensive hydrogel electrolyte, which provides flexible AZIESSs with high reversibility and versatility. Hence, the application of hydrogel electrolyte-based AZIESSs in wearable electronics is restricted. A thorough review is required for hydrogel electrolyte design to pave the way for high-performance flexible AZIESSs. This review delves into the engineering of desirable hydrogel electrolytes for flexible AZIESSs from the perspective of electrolyte designers. Detailed descriptions of hydrogel electrolytes in basic characteristics, Zn anode, and cathode stabilization effects as well as their functional properties are provided. Moreover, the application of hydrogel electrolyte-based flexible AZIESSs in wearable electronics is discussed, expecting to accelerate their strides toward lives. Finally, the corresponding challenges and future development trends are also presented, with the hope of inspiring readers.

Exploiting High-Voltage Stability of Dual-Ion Aqueous Electrolyte Reinforced by Incorporation of Fiberglass into Zwitterionic Hydrogel Electrolyte

Rechargeable zinc aqueous batteries are key alternatives for replacing toxic, flammable, and expensive lithium-ion batteries in grid energy storage systems. However, these systems possess critical weaknesses, including the short electrochemical stability window of water and intrinsic fast zinc dendrite growth. Hydrogel electrolytes provide a possible solution, especially cross-linked zwitterionic polymers that possess strong water retention ability and high ionic conductivity. Herein, an in situ prepared fiberglass-incorporated dual-ion zwitterionic hydrogel electrolyte with an ionic conductivity of 24.32 mS cm-1 , electrochemical stability window up to 2.56 V, and high thermal stability is presented. By incorporating this hydrogel electrolyte of zinc and lithium triflate salts, a zinc//LiMn0.6 Fe0.4 PO4 pouch cell delivers a reversible capacity of 130 mAh g-1 in the range of 1.0-2.2 V at 0.1C, and the test at 2C provides an initial capacity of 82.4 mAh g-1 with 71.8% capacity retention after 1000 cycles with a coulombic efficiency of 97%. Additionally, the pouch cell is fire resistant and remains safe after cutting and piercing.

A zinc-ion battery-type self-powered strain sensing system by using a high-performance ionic hydrogel

Flexible strain sensors based on conductive hydrogels have profound implications for wearable electronics and health-monitoring systems. However, such sensors still need to integrate with energy providing devices to drive their functions. Herein, we develop a soaking-free polyacrylamide/carboxymethyl cellulose/tannic acid (PAAM/CMC/TA) hydrogel containing 2 M ZnSO4 + 0.1 M MnSO4 electrolyte for a novel zinc-ion battery-type self-powered strain sensing system. The synthesized hydrogel possesses desirable stretchability (tensile strain/stress of 622%/132 kPa), self-healing and self-adhesive properties, as well as good ionic conductivity (0.76 ± 0.04 S m-1). A mechanically durable Zn-MnO2 battery is developed using the PAAM/CMC/TA hydrogel and it can deliver a high specific capacity (223.0 mA h g-1) and maintain stable energy outputs under severe mechanical deformations. The electrochemical behavior of the battery can recover even after several self-healing cycles. Due to the excellent strain and pressure sensing properties of the PAAM/CMC/TA hydrogel, the battery combined with a fixed resistor served as a self-powered wearable sensing device, which could translate different human movements into distinguishable electrical signals without an external power supply. Our work provides guidance for the development of next-generation self-powered sensors.

Improved Interfacial Ion Migration and Deposition through the Chain-Liquid Synergistic Effect by a Carboxylated Hydrogel Electrolyte for Stable Zinc Metal Anodes

The large-scale applicability of Zn-metal anodes is severely impeded by the issues such as the dendrite growth, complicated hydrogen evolution, and uncontrollable passivation reaction. Herein, a negatively charged carboxylated double-network hydrogel electrolyte (Gelatin/Sodium alginate-acetate, denoted as Gel/SA-acetate) has been developed to stabilize the interfacial electrochemistry, which restructures a type of Zn2+ ion solvent sheath optimized via a chain-liquid synergistic effect. New hydrogen bonds are reconstructed with water molecules by the zincophilic functional groups, and directional migration of hydrated Zn2+ ions is therefore induced. Concomitantly, the robust chemical bonding of such hydrogel layers to the Zn slab exhibits a desirable anti-catalytic effect, thereby greatly diminishing the water activity and eliminating side reactions. Subsequently, a symmetric cell using the Gel/SA-acetate electrolyte demonstrates a reversible plating/stripping performance for 1580 h, and an asymmetric cell reaches a state-of-the-art runtime of 5600 h with a high average Coulombic efficiency of 99.9 %. The resultant zinc ion hybrid capacitors deliver exceptional properties including the capacity retention of 98.5 % over 15000 cycles, energy density of 236.8 Wh kg-1 , and high mechanical adaptability. This work is expected to pave a new avenue for the development of novel hydrogel electrolytes towards safe and stable Zn anodes.

Amino acid-induced rapid gelation and mechanical reinforcement of hydrogels with low-hysteresis and self-recoverable and fatigue-resistant properties

Hydrogels with rapid gelation ability and robust mechanical properties are highly desirable for nascent applications in biomedical, wearable electronic, industrial and agricultural fields. However, current rapid-gelation hydrogels are compromised by poor mechanical properties, complex design of precursor molecular structures and limited precursor species. Herein, we propose a facile and universal strategy to achieve rapid gelation, strengthening and toughening of free-radical polymerized hydrogels by introducing cheap and accessible amino acids. Amino acids not only activate persulfate to quickly produce free radicals and thus induce fast free radical polymerization, but also can form strong hydrogen bonds with the network chains to strengthen and toughen the hydrogels. For example, with the presence of L-serine, the acrylamide (AM) monomer shows rapid gelation within tens of seconds, and moreover the resulting hydrogel reaches a tensile strength of 0.45 MPa and a breaking strain of 2060%. More importantly, owing to the extremely dynamic feature of the hydrogen bonds between L-serine molecules and network chains, the hydrogel possesses the advantages of low hysteresis, rapid self-recovery capability and outstanding fatigue resistance. Furthermore, this strategy is general to a wide range of amino acids and monomers. We also demonstrate that this rapid, controllable and universal strategy for the fabrication of mechanically robust hydrogels holds tremendous potential for diverse practical applications, such as flexible electronic sensors and ultraviolet (UV)-blocking artificial skins.

An Ultrahighly Stretchable and Recyclable Starch-Based Gel with Multiple Functions

With the development of various gel-based flexible sensors, novel gels with multiple integrated and efficient properties, particularly recyclability, have been developed. Herein, a starch-based ADM (amylopectin (AP)-poly(3-[dimethyl-[2-(2-methylprop-2- enoyloxy)ethyl]azaniumyl]propane-1-sulfonate) (PDMAPS)-MXene) gel is prepared by a facile "cooking" strategy accompanying the gelatinization of AP and polymerization reaction of zwitterionic monomers. Reversible crosslinking in the gel occurs through hydrogen bonding and electrostatic interactions. The ADM gel exhibits high stretchability (≈2700%, after one month), swift self-healing performance, self-adhesive properties, favorable freezing resistance, and satisfactory moisturizing properties (≥30 days). Interestingly, the ADM gel can be recycled and reused by a "kneading" method and "dissolution-dialysis" process, respectively. Furthermore, the ADM gel can be assembled as a strain sensor with a broad working strain range (≈800%) and quick response time (response time 211 ms and recovery time 253 ms, under 10% strain) to detect various macro- and micro-human-motions, even under harsh conditions such as pronunciation and handwriting. The ADM gel can also be used as a humidity sensor to investigate humidity and human respiratory status, suggesting its practical application in personal health management. This study provides a novel strategy for the preparation of high-performance recycled gels and flexible sensors.

Does Water-in-Salt Electrolyte Subdue Issues of Zn Batteries?

Zn-metal batteries (ZnBs) are safe and sustainable because of their operability in aqueous electrolytes, abundance of Zn, and recyclability. However, the thermodynamic instability of Zn metal in aqueous electrolytes is a major bottleneck for its commercialization. As such, Zn deposition (Zn2+ → Zn(s)) is continuously accompanied by the hydrogen evolution reaction (HER) (2H+ → H2 ) and dendritic growth that further accentuate the HER. Consequently, the local pH around the Zn electrode increases and promotes the formation of inactive and/or poorly conductive Zn passivation species (Zn + 2H2 O → Zn(OH)2 + H2 ) on the Zn. This aggravates the consumption of Zn and electrolyte and degrades the performance of ZnB. To propel HER beyond its thermodynamic potential (0 V vs standard hydrogen electrode (SHE) at pH 0), the concept of water-in-salt-electrolyte (WISE) has been employed in ZnBs. Since the publication of the first article on WISE for ZnB in 2016, this research area has progressed continuously. Here, an overview and discussion on this promising research direction for accelerating the maturity of ZnBs is provided. The review briefly describes the current issues with conventional aqueous electrolyte in ZnBs, including a historic overview and basic understanding of WISE. Furthermore, the application scenarios of WISE in ZnBs are detailed, with the description of various key mechanisms (e.g., side reactions, Zn electrodeposition, anions or cations intercalation in metal oxide or graphite, and ion transport at low temperature).

Ultra-robust, high-adhesive, self-healing, and photothermal zwitterionic hydrogels for multi-sensory applications and solar-driven evaporation

Zwitterionic hydrogels have received considerable attention owing to their characteristic structures and integrating multifunctionality. However, the superhydrophilicity-induced poor mechanical properties severely hinder their potential applications. Besides, from the perspective of wide applications, zwitterionic hydrogels with integrated high mechanical properties, conductivity and multifunctionalities including self-adhesive, self-healing, and photothermal properties are highly desirable yet challenging. Herein, a new class of high-performance and multifunctional zwitterionic hydrogels are designed based on the incorporation of polydopamine-coated liquid metal nanoparticles (LM@PDA). Due to the efficient energy dissipation endowed by the isotropically extensible deformation of LM@PDA and the multiple interactions within the hydrogel matrix, the resultant hydrogels exhibited ultrahigh robustness with tensile strength of up to 1.3 MPa, strain of up to 1555% and toughness of up to 7.3 MJ m-3, superior or comparable to those of most zwitterionic hydrogels. The introduced LM@PDA also endows the hydrogels with high conductivity, versatile adhesion, autonomous self-healing, excellent injectability, three-dimensional printability, degradability, and photothermal conversion performance. These preferable properties enable the hydrogels promising as wearable sensors with multiple sensory capabilities for a wide range of strain values (1-500%), pressures (0.5-200 kPa) and temperatures (20-80 °C) with an impressive temperature coefficient of resistance (up to 0.15 °C-1). Moreover, these hydrogels can be also applied as solar evaporators with a high water evaporation rate (up to 2.42 kg m-2 h-1) and solar-thermal conversion efficiency (up to 90.3%) for solar desalination and wastewater purification. The present work can pave the way for the future development of zwitterionic hydrogels and beyond.

Combined Catalysis: A Powerful Strategy for Engineering Multifunctional Sustainable Lignin-Based Materials

The production and engineering of sustainable materials through green chemistry will have a major role in our mission of transitioning to a more sustainable society. Here, combined catalysis, which is the integration of two or more catalytic cycles or activation modes, provides innovative chemical reactions and material properties efficiently, whereas the single catalytic cycle or activation mode alone fails in promoting a successful reaction. Polyphenolic lignin with its distinctive structural functions acts as an important template to create materials with versatile properties, such as being tough, antimicrobial, self-healing, adhesive, and environmentally adaptable. Sustainable lignin-based materials are generated by merging the catalytic cycle of the quinone-catechol redox reaction with free radical polymerization or oxidative decarboxylation reaction, which explores a wide range of metallic nanoparticles and metal ions as the catalysts. In this review, we present the recent work on engineering lignin-based multifunctional materials devised through combined catalysis. Despite the fruitful employment of this concept to material design and the fact that engineering has provided multifaceted materials able to solve a broad spectrum of challenges, we envision further exploration and expansion of this important concept in material science beyond the catalytic processes mentioned above. This could be accomplished by taking inspiration from organic synthesis where this concept has been successfully developed and implemented.

Heteroatom-rich carbon cathodes toward high-performance flexible zinc-ion hybrid supercapacitors

Aqueous zinc-ion hybrid supercapacitors (ZHSs) are attracting increased attention as emerging electrochemical energy storage systems. However, the design of high-performance carbon cathodes for ZHSs remains a challenge. Herein, we report the synthesis of heteroatom-rich carbon cathodes based on a biomass precursor of yeast and a hydrothermal pre-carbonization strategy, realizing high-performance ZHSs. The yeast is composed of polysaccharide chains containing abundant O/N heteroatoms, and a hydrothermal pre-carbonization process is conducive to preserving these heteroatoms in the high-specific-surface-area carbon materials obtained by carbonizing-activating the yeast precursor. As a result, the synthesized carbon materials are endowed with high O/N heteroatom contents (exceeding 13.9 at%), and present superior electrochemical performance in ZHSs, including a high specific capacity of 132 mAh/g, a high energy density of 94.4 Wh/kg and outstanding cycling stability with ∼100% capacity retention after 7000 cycles at 5 A/g. Besides, the heteroatom-rich carbon cathodes show a high capacity retention of 85.3% when their mass loading increases from 3.8 to 12.2 mg/cm², demonstrating promising application for practical ZHSs. Electrochemical analysis reveals that the O/N heteroatoms promote ion chemical adsorption and thus the electrochemical properties of the carbon cathodes. Furthermore, flexible ZHS devices constructed with the heteroatom-rich carbon cathodes and a biodegradable ZnSO₄/dough solid-state electrolyte exhibit excellent flexibility (as reflected by almost unchanged capacity under different bending states and 85% capacity retention after 500 bending cycles) as well as good repairability after dehydration under abnormal environments. This study offers new thinking in designing high-performance carbon cathodes and promotes nonflexible/flexible ZHSs moving towards practical applications.

A Liquid Metal Microdroplets Initialized Hemicellulose Composite for 3D Printing Anode Host in Zn-Ion Battery

Maintaining a steady affinity between gallium-based liquid metals (LM) and polymer binders, particularly under continuous mechanical deformation, such as extrusion-based 3D printing or plating/stripping of Zinc ion (Zn²⁺ ), is very challenging. Here, an LM-initialized polyacrylamide-hemicellulose/EGaIn microdroplets hydrogel is used as a multifunctional ink to 3D-print self-standing scaffolds and anode hosts for Zn-ion batteries. The LM microdroplets initiate acrylamide polymerization without additional initiators and cross-linkers, forming a double-covalent hydrogen-bonded network. The hydrogel acts as a framework for stress dissipation, enabling recovery from structural damage due to the cyclic plating/stripping of Zn²⁺ . The LM-microdroplet-initialized polymerization with hemicelluloses can facilitate the production of 3D printable inks for energy storage devices.

Hydrogel-Based Flexible Electronics

Flexible electronics is an emerging field of research involving multiple disciplines, which include but not limited to physics, chemistry, materials science, electronic engineering, and biology. However, the broad applications of flexible electronics are still restricted due to several limitations, including high Young's modulus, poor biocompatibility, and poor responsiveness. Innovative materials aiming for overcoming these drawbacks and boost its practical application is highly desirable. Hydrogel is a class of 3D crosslinked hydrated polymer networks, and its exceptional material properties render it as a promising candidate for the next generation of flexible electronics. Here, the latest methods of synthesizing advanced functional hydrogels and the state-of-art applications of hydrogel-based flexible electronics in various fields are reviewed. More importantly, the correlation between properties of the hydrogel and device performance is discussed here, to have better understanding of the development of flexible electronics by using environmentally responsive hydrogels. Last, perspectives on the current challenges and future directions in the development of hydrogel-based multifunctional flexible electronics are provided.

Dual-network polyvinyl alcohol/polyacrylamide/xanthan gum ionic conductive hydrogels for flexible electronic devices

Ionic conductive hydrogels (ICHs) have received widespread attention as an ideal candidate for flexible electronic devices. However, conventional ICHs failed in widespread applications due to their inability to simultaneously possess high toughness, high ionic conductivity, and anti-freezing properties. Here, polyvinyl alcohol (PVA) and polyacrylamide (PAAm) were first dissolved in the zinc chloride solution, in which zinc ions (Zn²⁺) act as ionic cross-linkers and conducting ions, followed by the introduction of xanthan gum (XG) with a unique structure of trisaccharide side chains into the PVA/PAAm semi-interpenetrating network to prepare a dual-network ICHs (refers as PPXZ). Enabled by the synergistic effect of intermolecular chemical covalent cross-linking and physical cross-linking, PPXZ hydrogels exhibit significantly improved mechanical properties without sacrificing electrical conductivity. Furthermore, PPXZ hydrogels are successfully applied to flexible electronic devices, such as strain sensors and zinc ion hybrid supercapacitors, exhibiting satisfactory sensing sensitivity and cycling stability at a wide temperature range, respectively. Even at a high current density (10 A g^-1), the capacity of the supercapacitor retains 88.24 % after 10,000 cycles. This strategy provides new insight for ICHs in wide temperature-applied flexible electronic devices.

Room Temperature Ca2+-Initiated Free Radical Polymerization for the Preparation of Conductive, Adhesive, Anti-freezing and UV-Blocking Hydrogels for Monitoring Human Movement

In recent years, conductive hydrogels have received increasing attention as wearable electronics due to the electrochemical properties of conductive polymers combined with the softness of hydrogels. However, conventional hydrogels are complicated to prepare, require high temperature or UV radiation to trigger monomer polymerization, and are frozen at low temperatures, which seriously hinder the application of flexible wearable devices. In this paper, a conductive sensor integrating mechanical properties, adhesion, UV shielding, anti-dehydration, and anti-freeze was prepared based on Ca²⁺-initiated radical polymerization at room temperature using the synergy of sodium lignosulfonate, acrylamide (AM), and calcium chloride (CaCl₂). Metal ions can activate ammonium persulfate to generate free radicals that allow rapid gelation of AM monomers at room temperature without external stimuli. Due to ionic cross-linking and non-covalent interaction, the hydrogels have good tensile properties (1153% elongation and 168 kPa tensile strength), high toughness (758 KJ·m^-3), excellent adhesive properties (48.5 kPa), high ionic conductivity (7.2 mS·cm^-1), and UV resistance (94.4%). CaCl₂ can inhibit ice nucleation, so that the hydrogels have anti-dehydration and frost resistance properties and even at -80 °C can maintain flexibility, high conductivity, and adhesion. Assembled into a flexible sensor, it can sense various large and small movements such as compression, bending, and talking, which is a flexible sensing material with wide application prospects.

Multifunctional conductive hydrogels based on the alkali lignin-Fe3+-mediated Fenton reaction for bioelectronics

Requirements for sustainable development have led to the urgent need for low cost, green, and reproducible resources. Lignin is one of the resources meeting this requirement. Herein, an alkali lignin (AL)-Fe³⁺-H₂O₂ autocatalytic system was introduced to assemble multifunctional AL-Fe³⁺/polyacrylic acid (PAA) hydrogels. The AL-Fe³⁺ pair-mediated Fenton reaction can generate a large number of free radicals to accelerate gelation. Owing to the abundant hydrogen bonds and metal coordination bonds, the AL-Fe³⁺/PAA hydrogels possessed excellent mechanical properties (tensile strength of 38 kPa), adhesion properties (18 kPa for pigskin), and self-healing ability (78 % for tensile strength and 88 % for tensile modulus). In addition, hydrogel-based sensors with high durability, strain sensitivity, and fast response times were employed to accurately monitor motion or electrophysiological signals. Subsequently, a portable sensing device for the wireless and remote monitoring of a user's motion status was integrated. As a result, an AL-Fe³⁺-H₂O₂ autocatalytic system has great potential for use in hydrogel preparation in flexible bioelectronics and wearable sensors. It can promote the sustainable development of flexible bioelectronics.

Advances in Low-Temperature Dual-Ion Batteries

Fabricating rechargeable batteries for low-temperature (LT) applications is highly desired at high altitudes/latitudes, aerospace/subsea exploration, and defense. Lithium-ion batteries (LIBs) suffer from severe loss of capacity and energy/power density at sub-zero temperatures caused by the sluggish kinetics. By utilizing both cations and anions as charge carriers, dual-ion batteries (DIBs) become a nascent battery system for LT tolerance by overcoming ion-desolvation during discharge. Here, we summarize recent advances in LT DIBs. To begin with, distinctive advantages of DIBs at LTs are highlighted compared to LIBs, with a special attention to anion (de-)intercalation, and the in-depth understanding of key challenges for LT operation is discussed. The next major section deals with the exciting progress on the advanced strategies to improve the LT performance of DIBs, including alternative electrode materials, reliable electrolyte formulations, and construction of interphase protective layers. Finally, prospects and future developments in this exciting field of LT DIBs are suggested.

Rational Design of Flexible Zn-Based Batteries for Wearable Electronic Devices

The advent of 5G and the Internet of Things has spawned a demand for wearable electronic devices. However, the lack of a suitable flexible energy storage system has become the "Achilles' Heel" of wearable electronic devices. Additional problems during the transformation of the battery structure from conventional to flexible also present a severe challenge to the battery design. Flexible Zn-based batteries, including Zn-ion batteries and Zn-air batteries, have long been considered promising candidates due to their high safety, eco-efficiency, substantial reserve, and low cost. In the past decade, researchers have come up with elaborate designs for each portion of flexible Zn-based batteries to improve the ionic conductivities, mechanical properties, environment adaptabilities, and scalable productions. It would be helpful to summarize the reported strategies and compare their pros and cons to facilitate further research toward the commercialization of flexible Zn-based batteries. In this review, the current progress in developing flexible Zn-based batteries is comprehensively reviewed, including their electrolytes, cathodes, and anodes, and discussed in terms of their synthesis, characterization, and performance validation. By clarifying the challenges in flexible Zn-based battery design, we summarize the methodology from previous investigations and propose challenges for future development. In the end, a research paradigm of Zn-based batteries is summarized to fit the burgeoning requirement of wearable electronic devices in an iterative process, which will benefit the future development of Zn-based batteries.

Manipulating Deposition Behavior by Polymer Hydrogel Electrolyte Enables Dendrite-Free Zinc Anode for Zinc-Ion Hybrid Capacitors

Rechargeable aqueous zinc-ion hybrid capacitors (ZHCs) have aroused unprecedented attention because of their high safety, cost effectiveness, and environmental compatibility. However, the intractable issues of dendrite growth and side reactions at the electrode-electrolyte interface deteriorate durability and reversibility of Zn anodes, deeply encumbering the large-scale application of ZHCs. Concerning these obstacles, a negatively charged carboxylated chitosan-intensified hydrogel electrolyte (CGPPHE) with cross-linked networks is reported to stabilize Zn anodes. Beyond possessing good mechanical characteristics, the CGPPHE with polar groups can reduce the desolvation energy barrier of hydrated Zn²⁺ , constrain the 2D Zn²⁺ diffusion, and uniformize electric field and Zn²⁺ flux distributions, assuring dendrite-free Zn deposition with high plating-stripping efficiency. Concurrently, the hydrophilic CGPPHE alleviates harmful hydrogen evolution and corrosion by abating water activity. Accordingly, Zn|CGPPHE|Zn and Zn|CGPPHE|Cu cells exhibit an extended life exceeding 350 h (1600 mAh cm^-2 cumulative capacity under 20 mA cm^-2 ) and a high average coulombic efficiency of 98.2%, respectively. The resultant flexible ZHCs with CGPPHE and template-regulated carbon cathode present perfect properties in capacity retention (97.7% over 10 000 cycles), energy density (91.8 Wh kg^-1 ), and good mechanical adaptability. This study provides insight into developing novel hydrogel electrolytes toward highly rechargeable and stable ZHCs.

Transparent, Ultra-Stretching, Tough, Adhesive Carboxyethyl Chitin/Polyacrylamide Hydrogel Toward High-Performance Soft Electronics

To date, hydrogels have gained increasing attentions as a flexible conductive material in fabricating soft electronics. However, it remains a big challenge to integrate multiple functions into one gel that can be used widely under various conditions. Herein, a kind of multifunctional hydrogel with a combination of desirable characteristics, including remarkable transparency, high conductivity, ultra-stretchability, toughness, good fatigue resistance, and strong adhesive ability is presented, which was facilely fabricated through multiple noncovalent crosslinking strategy. The resultant versatile sensors are able to detect both weak and large deformations, which owns a low detection limit of 0.1% strain, high stretchability up to 1586%, ultrahigh sensitivity with a gauge factor up to 18.54, as well as wide pressure sensing range (0-600 kPa). Meanwhile, the fabrication of conductive hydrogel-based sensors is demonstrated for various soft electronic devices, including a flexible human-machine interactive system, the soft tactile switch, an integrated electronic skin for unprecedented nonplanar visualized pressure sensing, and the stretchable triboelectric nanogenerators with excellent biomechanical energy harvesting ability. This work opens up a simple route for multifunctional hydrogel and promises the practical application of soft and self-powered wearable electronics in various complex scenes.

Polysaccharide-Derived Ice Recrystallization Inhibitors with a Modular Design: The Case of Dextran-Based Graft Polymers

Ice recrystallization inhibitors inspired from antifreeze proteins (AFPs) are receiving increasing interest for cryobiology and other extreme environment applications. Here, we present a modular strategy to develop polysaccharide-derived biomimetics, and detailed studies were performed in the case of dextran. Poly(vinyl alcohol) (PVA) which has been termed as one of the most potent biomimetics of AFPs was grafted onto dextran via thiol-ene click chemistry (Dex-g-PVA). This demonstrated that Dex-g-PVA is effective in IRI and its activity increases with the degree of polymerization (DP) (sizes of ice crystals were 18.846 ± 1.759 and 9.700 ± 1.920 μm with DPs of 30 and 80, respectively) and fraction of PVA. By means of the dynamic ice shaping (DIS) assay, Dex-g-PVA is found to engage on the ice crystal surfaces, thus the ice affinity accounts for their IRI activity. In addition, Dex- g-PVA displayed enhanced IRI activity compared to that of equivalent PVA alone. We speculate that the hydrophilic nature of dextran would derive PVA in a stretch conformation that favors ice binding. The modular design can not only offer polysaccharides IRI activity but also favor the ice-binding behavior of PVA.

Mechano-Graded Electrodes Mitigate the Mismatch between Mechanical Reliability and Energy Density for Foldable Lithium-Ion Batteries

Flexible lithium-ion batteries (LIBs) with high energy density are highly desirable for wearable electronics. However, difficult to achieve excellent flexibility and high energy density simultaneously via the current approaches for designing flexible LIBs. To mitigate the mismatch, mechano-graded electrodes with gradient-distributed maximum allowable strain are proposed to endow high-loading-mass slurry-coating electrodes with brilliant intrinsic flexibility without sacrificing energy density. As a proof-of-concept, the up-graded LiNi_1/3 Mn_1/3 Co_1/3 O₂ cathodes (≈15 mg cm^-2 , ≈70 µm) and graphite anodes (≈8 mg cm^-2 , ≈105 µm) can tolerate an extremely low bending radius of 400 and 600 µm, respectively. Finite element analysis (FEA) reveals that, compared with conventionally homogeneous electrodes, the flexibility of the up-graded electrodes is enhanced by specifically strengthening the upper layer and avoiding crack initiation. Benefiting from this, the foldable pouch cell (required bending radius of ≈600 µm) successfully realizes a remarkable figure of merit (FOM, energy density vs bending radius) of 121.3 mWh cm^-3 . Moreover, the up-graded-electrodes-based pouch cells can deliver a stable power supply, even under various deformation modes, such as twisting, folding, and knotting. This work proposes new insights for harmonizing the mechanics and electrochemistry of energy storage devices to achieve high energy density under flexible extremes.

Working Aqueous Zn Metal Batteries at 100 °C

Reliable power supplies at extremely high temperatures are urgently needed to broaden the application scenarios for electric devices. Aqueous zinc metal batteries (ZMBs) with intrinsic safety are a promising alterative for high-temperature energy storage. However, the reversibility and long-term cycling stability of aqueous ZMBs at extremely high temperatures (≥100 °C) have rarely been explored. Herein, we reveal that spontaneous Zn corrosion and severe electrochemical hydrogen evolution at high temperature are vital restrictions for traditional aqueous ZMBs. To address this, a crowding agent, 1,5-pentanediol, was introduced into an aqueous electrolyte to suppress water reactivity by strengthening O-H bonds of H₂O and decreasing H₂O content in the Zn²⁺ solvation sheath, while maintaining flame resistance of the electrolyte. Importantly, this electrolyte enabled reversible Zn deposition with a Coulombic efficiency of 98.1% and a long cycling life of Zn//Zn batteries for over 500 cycles (at 1 mA cm^-2 and 0.5 mAh cm^-2) at 100 °C. Moreover, stable cycling of Zn//Te full batteries at 100 °C was demonstrated.

Anti-Fouling, Adhesive Polyzwitterionic Hydrogel Electrodes Toughened Using a Tannic Acid Nanoflower

Conductive polyzwitterionic hydrogels with good adhesion properties show potential prospect in implantable electrodes and electronic devices. Adhesive property of polyzwitterionic hydrogels in humid environments can be improved by the introduction of catechol groups. However, common catechol modifiers can usually quench free radicals, resulting in a contradiction between long-term tissue adhesion and hydrogel toughness. By adding tannic acid (TA) to the dispersion of clay nanosheets and nanofibers, we designed TA-coated nanoflowers and nanofibers as the reinforcing phase to prepare polyzwitterionic hydrogels with adhesion properties. The hydrogel combines the mussel-like and zwitterionic co-adhesive mechanism to maintain long-term adhesion in underwater environments. In particular, the noncovalent cross-linking provided by the nanoflower structure effectively compensates for the defects caused by free-radical quenching so that the hydrogel obtained a high stretchability of over 2900% and a toughness of 1.16 J/m³. The hydrogel also has excellent anti-biofouling property and shows resistance to bacteria and cells. In addition, the hydrogel possesses a low modulus (<10 kPa) and ionic conductivity (0.25 S/m), making it an ideal material for the preparation of implantable electrodes.

Ionic conductive hydroxypropyl methyl cellulose reinforced hydrogels with extreme stretchability, self-adhesion and anti-freezing ability for highly sensitive skin-like sensors

Ionically-conductive hydrogels are attracting increasing interest as skin-like sensors, however, the fabrication of ion-conductive hydrogels with excellent mechanical properties, high conductivity, self-adhesion and anti-freezing ability for high-performance sensors remains a challenge. Herein, a highly ion-conductive hydrogel is prepared by introducing LiCl into polyacrylamide/hydroxypropyl methyl cellulose (PAM/HPMC) composite hydrogel. The introduction of LiCl simultaneously endows the PAM/HPMC/LiCl hydrogel with outstanding stretchability (1453 %), high tensile strength (135 kPa), skin-like elasticity (9.18 kPa), high conductivity (7.85 S/m), good adhesiveness and wide operating temperature range. Impressively, this ion-conductive hydrogel can be utilized in skin-like sensor, which achieves high strain sensitivity (GF = 11.19) with wide sensing ranges (up to 600 %), and excellent endurance over 250 consecutive stretching. As a result, the wearable sensor assembled from the hydrogels can be used to detect complex human activities with high stability even at -40 °C. This work promotes the development of ion-conductive hydrogels with broad operating temperature in advanced sensory platform.

Natural Polysaccharide Strengthened Hydrogel Electrolyte and Biopolymer Derived Carbon for Durable Aqueous Zinc Ion Storage

Aqueous zinc-ion hybrid supercapacitors (ZHSCs) represent one of the current research subjects because of their flame retardancy, ease of manufacturing, and exceptional roundtrip efficiency. With the evolution into real useful energy storage cells, the bottleneck factors of the corrosion and dendrite growth problems must be properly resolved for largely boosting their cycling life and energy efficiency. Herein, a natural polysaccharide strengthened hydrogel electrolyte (denoted as PAAm/agar/Zn(CF3SO3)2) was engineered by designing an asymmetric dual network of covalently cross-linked polyacrylamide (denoted as PAAm) and physically cross-linked loose polysaccharide (e.g., agar) followed by intense uptake of Zn(CF3SO3)2 aqueous electrolyte. In this polymeric matrix, the PAAm chains are responsible for constructing the soft domains to immobilize the water molecules, and the agar component boosts the mechanical performance (by using its inherent reversible sacrificial bonds) and favors the electrolyte ion transport. Due to these reasons, the as-designed hydrogel electrolyte effectively inhibits the zinc dendrite growth, realizes the uniform Zn deposition, and affords a satisfactory ionic conductivity of 1.55 S m-1, excellent tensile strength (78.9 kPa at 507.7% stretchable), and high compression strength (118.0 kPa at 60.0% strain). Additionally, a biopolymer-derived N-doped carbon microsphere cathode material with a highly interconnected porous carbonaceous network (denoted as NC) was also synthesized, which delivers a high capacity of 92.8 mAh g-1, along with superb rate capability and long duration cycling lifespan (95.4% retention for 10000 cycles) in the aqueous Zn//NC ZHSC. More notably, with integrated merits of the PAAm/agar/Zn(CF3SO3)2 hydrogel electrolyte and NC, the as-built quasi-solid-state ZHSC achieves a high specific capacity of 73.4 mAh g-1 and superior energy density of 61.3 Wh kg-1 together with excellent cycling stability for 10000 cycles. This work demonstrated favorable practicability in the structural design of the hydrogel electrolytes and electrode materials for advanced ZHSC applications.

Highly Conformal Polymers for Ambulatory Electrophysiological Sensing

Stable ambulatory electrophysiological sensing is widely utilized for smart e-healthcare monitoring, clinical diagnosis of cardiovascular diseases, treatment of neurological diseases, and intelligent human-machine interaction. As the favorable signal interaction platform of electrophysiological sensing, the conformal property of on-skin electrodes is an extremely crucial factor that can affect the stability of long-term ambulatory electrophysiological sensing. From the perspective of materials, to realize conformal contact between electrodes and skin for stable sensing, highly conformal polymers are strongly demanding and attracting ever-growing attention. In this review, we focused on the recent progress of highly conformal polymers for ambulatory electrophysiological sensing, including their synthetic methods, conformal property, and potential applications. Specifically, three main types of highly conformal polymers for stable long-term electrophysiological signals monitoring were proposed, including nature silk fibroin based conformal polymers, marine mussels bio-inspired conformal polymers, and other conformal polymers such as zwitterionic polymers and polyacrylamide. Furthermore, the future challenges and opportunities of preparing highly conformal polymers for on-skin electrodes were also highlighted. This article is protected by copyright. All rights reserved.

Lignin-Based/Polypyrrole Carbon Nanofiber Electrode With Enhanced Electrochemical Properties by Electrospun Method

Tailoring the structure and properties of lignin is an important step toward electrochemical applications. In this study, lignin/polypyrrole (PPy) composite electrode films with microporous and mesoporous structures were designed effectively by electrostatic spinning, carbonization, and in situ polymerization methods. The lignin can not only reduce the cost of carbon fiber but also increase the specific surface area of composite films due to the removal of carbonyl and phenolic functional groups of lignin during carbonization. Besides, the compact three-dimensional (3D) conductive network structures were constructed with PPy particles densely coated on the lignin nanofibers, which was helpful to improve the conductivity and fast electron transfer during the charging and discharging processes. The synthesized lignin carbon fibers/PPy anode materials had good electrochemical performance in 1 M H2SO4 electrolyte. The results showed that, at a current density of 1 A g−1, the lignin carbon nanofibers/PPy (LCNFs/PPy) had a larger specific capacitance of 213.7 F g−1 than carbon nanofibers (CNFs), lignin carbon nanofibers (LCNFs), and lignin/PPy fiber (LPAN/PPy). In addition, the specific surface area of LCNFs/PPy reached 872.60 m2 g−1 and the average pore size decreased to 2.50 nm after being coated by PPy. Therefore, the independent non-binder and self-supporting conductive film is expected to be a promising electrode material for supercapacitors with high performance.

Synergistic effects of B/S co-doped spongy-like hierarchically porous carbon for a high performance zinc-ion hybrid capacitor

Zinc-ion hybrid capacitors (ZIHCs) are regarded as a potential candidate for large-scale energy storage devices. However, the inadequate cathode and the inferior wettability between the electrode and electrolyte hinder the construction of high-performance ZIHCs. Herein, boron (B) and sulfur (S) co-doped spongy-like hierarchically porous carbon (B₂S₃C) is first proposed as a cathode material for ZIHCs. Here, B doping is favorable for improving the wettability, while S doping contributes to enhancing the electrical properties. In addition, the density functional theory (DFT) results uncover that B and S atoms contribute to reducing the energy barrier between Zn²⁺ and the cathode, leading to boosted chemical adsorption ability of Zn²⁺ on the cathode. As a result, the assembled ZIHC based on B₂S₃C exhibits a high specific capacity of 182.6 mA h g^-1 at 0.1 A g^-1, an excellent capacity retention of 96.2% after 10 000 cycles and a remarkable energy density of 292.2 W h kg^-1 at a power density of 62.2 W kg^-1, superior to the previously reported ZIHCs. Due to the flexibility of the assembled electrodes, the solid-state ZIHC can sustain various deformations. This work paves a feasible path for the development of cost-effective and high-performance porous carbon materials.

Microfluidic Fabrication of Hierarchical-Ordered ZIF-L(Zn)@Ti3 C2 Tx Core-Sheath Fibers for High-Performance Asymmetric Supercapacitors

We report hierarchical-ordered ZIF-L(Zn)@Ti₃ C₂ T_x MXene core-sheath fibers, in which a ZIF-L(Zn) nanowall array sheath is grown vertically on an anisotropic Ti₃ C₂ T_x core by Ti-O-Zn/Ti-F-Zn chemical bonds. Through highly efficient microfluidic assembly and microchannel reactions, ZIF-L(Zn)@Ti₃ C₂ T_x exhibits well-developed micro-/mesoporosity, ordered ionic pathways, fast interfacial electron conduction and large-scale fabrication, significantly boosting charges dynamic transport and intercalation. The resultant ZIF-L(Zn)@Ti₃ C₂ T_x fiber presents large capacitance (1700 F cm^-3 ) and outstanding rate performance in a 1 M H₂ SO₄ electrolyte. Additionally, ZIF-L(Zn)@Ti₃ C₂ T_x fiber-based solid-state asymmetric supercapacitors deliver high energy density (19.0 mWh cm^-3 ), excellent capacitance (854 F cm^-3 ), large deformable/wearable capabilities and long-time cyclic stability (20 000 cycles), which realize natural sunlight-induced self-powered applications to drive water level/earthquake alarm devices.