1
|
Wankier Z, Taylor C, Drew A, Kubiak E, Agarwal J, Sinclair S. Use of computer tomography imaging for analyzing bone remodeling around a percutaneous osseointegrated implant. J Orthop Res 2022; 40:2065-2075. [PMID: 34910325 DOI: 10.1002/jor.25247] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 05/06/2021] [Revised: 12/01/2021] [Accepted: 12/11/2021] [Indexed: 02/04/2023]
Abstract
Osseointegration (OI) is being used for the direct skeletal attachment of prosthetic limbs using an intramedullary stem that extends percutaneously from the subject's residual limb. For this technology to be successful, bone ingrowth and remodeling around the implant must occur. Physicians need an effective way to assess bone remodeling to make informed treatment and rehabilitation decisions. Previous studies utilizing two-dimensional imaging X-ray as a tool to monitor bone-remodeling around OI devices have limitations. This study describes methodology that was developed utilizing computed tomography (CT) imaging as a tool for analyzing bone remodeling around a percutaneous OI implant. Six transfemoral amputees implanted with a percutaneous osseointegrated prosthesis (POP) had CT scans taken of their residual femur at 6 and 52 weeks postoperatively. Three-dimensional femoral models were processed using custom MATLAB script to collect cortical and medullary morphology measurements. Morphology data from 6- and 52-week scans were compared to quantify bone remodeling around the POP implant. Fifty-two weeks after implantation of the POP device, increases in cortical bone area and thickness were observed around the porous-coated stem. Minimal changes were observed in the medullary canal parameters within the periprosthetic regions. This study successfully utilized CT imaging and three-dimensional modeling techniques to analyze longitudinal data of bone remodeling around a transfemoral percutaneous implant. These methods have the potential to be used as a clinical tool for evaluating orthopedic implants in vivo. Data collected suggests that the POP device achieved the desired bone remodeling around the porous-coated region of the implanted stem.
Collapse
Affiliation(s)
- Zakary Wankier
- Department of Orthopaedics, University of Utah, Salt Lake City, Utah, USA
| | - Carolyn Taylor
- Department of Orthopaedics, University of Utah, Salt Lake City, Utah, USA
| | - Alex Drew
- Department of Orthopaedics, University of Utah, Salt Lake City, Utah, USA
| | - Erik Kubiak
- Department of Orthopaedics, University of Utah, Salt Lake City, Utah, USA.,Department of Orthopedic Surgery, University of Nevada Las Vegas, Las Vegas, Nevada, USA.,George E. Wahlen Department of Veterans Affairs Medical Center, Salt Lake City, Utah, USA
| | - Jayant Agarwal
- George E. Wahlen Department of Veterans Affairs Medical Center, Salt Lake City, Utah, USA.,Division of Plastic Surgery, Salt Lake City, Utah, USA
| | - Sarina Sinclair
- Department of Orthopaedics, University of Utah, Salt Lake City, Utah, USA.,George E. Wahlen Department of Veterans Affairs Medical Center, Salt Lake City, Utah, USA
| |
Collapse
|
2
|
Miller A, Jeyapalina S, Agarwal J, Mansel M, Beck JP. A preliminary, observational study using whole-blood RNA sequencing reveals differential expression of inflammatory and bone markers post-implantation of percutaneous osseointegrated prostheses. PLoS One 2022; 17:e0268977. [PMID: 35617338 PMCID: PMC9135298 DOI: 10.1371/journal.pone.0268977] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/20/2022] [Accepted: 05/11/2022] [Indexed: 11/20/2022] Open
Abstract
AIMS While the benefits of direct skeletal attachment of artificial limbs are well recognized, device failure due to infection and insufficient osseointegration remain obstacles to obtaining consistently successful outcomes. Currently, the potential for device failure is assessed by subjective pain, clinical function scores, radiographic evidence of bone atrophy, and the presence of radiolucent lines at the bone-implant interface, and subjective pain and function scores. Our hypothesis is that measurable biological indices might add another objective means to assess trends toward bone and stomal healing. This longitudinal cohort study was undertaken to identify potential serological biomarkers suggestive of bone remodeling and the presence of stomal tissue inflammation. METHODS Ten unilateral transfemoral amputee veterans, who were implanted with a percutaneous osseointegrated (OI) skeletal limb docking system, were recruited to participate in this IRB-approved study. Venous blood samples were obtained from before the Stage 1 Surgery up to 1 year following the Stage 2 Surgery. Whole-blood RNA was extracted, sequenced, mapped, and analyzed. Of the significant differentially expressed (DEGs) genes (p<0.05) identified, four genes of interest (IL12B, IL33, COL2A1, and SOST) were validated using qPCR. Enrichment analysis was performed to identify significant (p<0.01) Gene Ontology (GO) terms. RESULTS Most differentially expressed genes were only detected at PoS1 immediately after the first surgery. Of the significant genes identified, IL12B and IL33 were related to inflammation, and COL2A1 and SOST were associated with bone remodeling. These four genes were identified with greater than 20 log fold-change. CONCLUSION Whole-blood RNA-seq data from 10 patients who previously underwent percutaneous osseointegrated lower limb implantation revealed four genes of interest that are known to be involved in inflammation or bone remodeling. If verified in future studies, these genes may serve as markers for predicting optimal bone remodeling and stomal tissue healing following OI device implantation.
Collapse
Affiliation(s)
- Andrew Miller
- Research, George E. Wahlen Department of Veterans Affairs Medical Center, Salt Lake City, Utah, United States of America
- Division of Plastic and Reconstructive Surgery, Department of Surgery, School of Medicine, University of Utah, Salt Lake City, Utah, United States of America
- Department of Biomedical Engineering, University of Utah School of Engineering, Salt Lake City, Utah, United States of America
| | - Sujee Jeyapalina
- Research, George E. Wahlen Department of Veterans Affairs Medical Center, Salt Lake City, Utah, United States of America
- Division of Plastic and Reconstructive Surgery, Department of Surgery, School of Medicine, University of Utah, Salt Lake City, Utah, United States of America
| | - Jay Agarwal
- Research, George E. Wahlen Department of Veterans Affairs Medical Center, Salt Lake City, Utah, United States of America
- Division of Plastic and Reconstructive Surgery, Department of Surgery, School of Medicine, University of Utah, Salt Lake City, Utah, United States of America
| | - Mitchell Mansel
- Undergraduate Research Opportunities Program, University of Utah, Salt Lake City, Utah, United States of America
| | - James Peter Beck
- Research, George E. Wahlen Department of Veterans Affairs Medical Center, Salt Lake City, Utah, United States of America
- Department of Orthopaedics, University of Utah School of Medicine, Salt Lake City, Utah, United States of America
| |
Collapse
|
3
|
Taylor CE, Henninger HB, Bachus KN. Finite Element Analysis of Transhumeral and Transtibial Percutaneous Osseointegrated Endoprosthesis Implantation. Front Rehabil Sci 2021; 2:744674. [PMID: 35178528 PMCID: PMC8849523 DOI: 10.3389/fresc.2021.744674] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/20/2021] [Accepted: 10/21/2021] [Indexed: 06/14/2023]
Abstract
Cadaveric mechanical testing of a percutaneous osseointegration docking system (PODS) for osseointegration (OI) prosthetic limb attachment revealed that translation of the exact system from the humerus to the tibia may not be suitable. The PODS, designed specifically for the humerus achieved 1.4-4.8 times greater mechanical stability in the humerus than in the tibia despite morphology that indicated translational feasibility. To better understand this discrepancy, finite element analyses (FEAs) modeled the implantation of the PODS into the bones. Models from cadaveric humeri (n = 3) and tibia (n = 3) were constructed from CT scans, and virtual implantation preparation of an array of endoprosthesis sizes that made contact with the endosteal surface but did not penetrate the outer cortex was performed. Final impaction of the endoprosthesis was simulated using a displacement ramp function to press the endoprosthesis model into the bone. Impaction force and maximum first principal (circumferential) stress were recorded to estimate stability and assess fracture risk of the system. We hypothesized that the humerus and tibia would have different optimal PODS sizing criteria that maximized impaction force and minimized first principal stress. The optimal sizing for the humerus corresponded to implantation instructions, whereas for the tibia optimal sizing was three times larger than the guidelines indicated. This FEA examination of impaction force and stress distribution lead us to believe that the same endoprosthesis strategy for the humerus is not suitable for the tibia because of thin medial and lateral cortices that compromise implantation.
Collapse
Affiliation(s)
- Carolyn E. Taylor
- Department of Orthopaedics, School of Medicine, University of Utah, Salt Lake City, UT, United States
- Department of Biomedical Engineering, College of Engineering, University of Utah, Salt Lake City, UT, United States
| | - Heath B. Henninger
- Department of Orthopaedics, School of Medicine, University of Utah, Salt Lake City, UT, United States
- Department of Biomedical Engineering, College of Engineering, University of Utah, Salt Lake City, UT, United States
| | - Kent N. Bachus
- Department of Orthopaedics, School of Medicine, University of Utah, Salt Lake City, UT, United States
- Department of Biomedical Engineering, College of Engineering, University of Utah, Salt Lake City, UT, United States
- VA Salt Lake City Health Care System, Salt Lake City, UT, United States
| |
Collapse
|
4
|
Li Y, Felländer-Tsai L. The bone anchored prostheses for amputees - Historical development, current status, and future aspects. Biomaterials 2021; 273:120836. [PMID: 33894405 DOI: 10.1016/j.biomaterials.2021.120836] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/03/2021] [Revised: 03/28/2021] [Accepted: 04/14/2021] [Indexed: 12/27/2022]
Abstract
In the past 50 years, bone anchored prostheses have evolved from a concept for experimental treatment to a rapidly developing area in orthopedics and traumatology. Up to date, there are dozens of centers in the world providing osseointegration amputation reconstructions and more than a thousand patients using the bone anchored prostheses. Compared with conventional socket prostheses, the bone anchored prosthesis by osseointegration avoids the debilitating problems related with soft tissues. It also provides physiological weight bearing, improved range of motion, and sensory feedback, all of which contribute to the improvement on quality of life for amputees. The present article briefly reviews the historical development of osseointegration surgery for amputation reconstruction and the current challenges. The implant design characters and surgical techniques of the two types of implants; the screw-type implant (presented by the OPRA system), and the press-fit implants (presented by EEP and OPL systems) are described. The major complications, infections and mechanical failures, are discussed in detail based on the latest evidence. Future aspects and experimental trials aiming to overcome the current challenges are presented.
Collapse
Affiliation(s)
- Yan Li
- Division of Orthopaedics and Biotechnology, Department of Clinical Science Intervention and Technology (CLINTEC), Karolinska Institutet, Stockholm, Sweden; Theme Trauma and Reparative Medicine, Department of Orthopedics and Traumatology, Karolinska University Hospital, Stockholm, Sweden
| | - Li Felländer-Tsai
- Division of Orthopaedics and Biotechnology, Department of Clinical Science Intervention and Technology (CLINTEC), Karolinska Institutet, Stockholm, Sweden; Theme Trauma and Reparative Medicine, Department of Orthopedics and Traumatology, Karolinska University Hospital, Stockholm, Sweden.
| |
Collapse
|
5
|
Taylor CE, Drew AJ, Zhang Y, Qiu Y, Bachus KN, Foreman KB, Henninger HB. Upper extremity prosthetic selection influences loading of transhumeral osseointegrated systems. PLoS One 2020; 15:e0237179. [PMID: 32760149 PMCID: PMC7410272 DOI: 10.1371/journal.pone.0237179] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/06/2020] [Accepted: 07/21/2020] [Indexed: 11/19/2022] Open
Abstract
Percutaneous osseointegrated (OI) implants are increasingly viable as an alternative to socket suspension of prosthetic limbs. Upper extremity prostheses have also become more complex to better replicate hand and arm function and attempt to recreate pre-amputation functional levels. With more functionality comes heavier devices that put more stress on the bone-implant interface, which could be an issue for implant stability. This study quantified transhumeral loading at defined amputation levels using four simulated prosthetic limb-types: (1) body powered hook, (2) myoelectric hook, (3) myoelectric hand, and (4) advanced prosthetic limb. Computational models were constructed to replicate the weight distribution of each prosthesis type, then applied to motion capture data collected during Advanced Activities of Daily Living (AADLs). For activities that did not include a handheld weight, the body powered prosthesis bending moments were 13–33% (range of means for each activity across amputation levels) of the intact arm moments (reference 100%), torsional moments were 12–15%, and axial pullout forces were 30–40% of the intact case (p≤0.001). The myoelectric hook and hand bending moments were 60–99%, torsional moments were 44–97%, and axial pullout forces were 62–101% of the intact case. The advanced prosthesis bending moments were 177–201%, torsional moments were 164–326%, and axial pullout forces were 133–185% of the intact case (p≤0.001). The addition of a handheld weight for briefcase carry and jug lift activities reduced the overall impact of the prosthetic model itself, where the body powered forces and moments were much closer to those of the intact model, and more complex prostheses further increased forces and moments beyond the intact arm levels. These results reveal a ranked order in loading magnitude according to complexity of the prosthetic device, and highlight the importance of considering the patient’s desired terminal device when planning post-operative percutaneous OI rehabilitation and training.
Collapse
Affiliation(s)
- Carolyn E. Taylor
- Department of Orthopaedics, University of Utah, Salt Lake City, Utah, United States of America
- Department of Biomedical Engineering, University of Utah, Salt Lake City, Utah, United States of America
| | - Alex J. Drew
- DJO Surgical, Austin, Texas, United States of America
| | - Yue Zhang
- Department of Epidemiology, University of Utah, Salt Lake City, Utah, United States of America
| | - Yuqing Qiu
- Department of Epidemiology, University of Utah, Salt Lake City, Utah, United States of America
| | - Kent N. Bachus
- Department of Orthopaedics, University of Utah, Salt Lake City, Utah, United States of America
- Department of Biomedical Engineering, University of Utah, Salt Lake City, Utah, United States of America
- Department of Veterans Affairs, University of Utah, Salt Lake City, Utah, United States of America
| | - K. Bo Foreman
- Department of Veterans Affairs, University of Utah, Salt Lake City, Utah, United States of America
- Department of Physical Therapy and Athletic Training, University of Utah, Salt Lake City, Utah, United States of America
| | - Heath B. Henninger
- Department of Orthopaedics, University of Utah, Salt Lake City, Utah, United States of America
- Department of Biomedical Engineering, University of Utah, Salt Lake City, Utah, United States of America
- * E-mail:
| |
Collapse
|
6
|
Taylor CE, Henninger HB, Bachus KN. Cortical and medullary morphology of the tibia. Anat Rec (Hoboken) 2020; 304:507-517. [PMID: 32585072 DOI: 10.1002/ar.24479] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2020] [Revised: 04/28/2020] [Accepted: 05/07/2020] [Indexed: 12/17/2022]
Abstract
Bone resorption caused by stress shielding and insufficient bone-implant contact continues to be problematic for orthopedic endoprostheses that utilize osseointegration (OI) for skeletal fixation. Morphologic analyses have helped combat this issue by defining anatomic parameters to optimize endoprosthesis loading by maximizing bone-implant contact. These studies have not typically included diaphyseal medullary morphology, as this region is not pertinent to total joint replacement. To the contrary, percutaneous OI endoprostheses for prosthetic limb attachment are placed in the diaphysis of the long bone. This study examined the cortical and medullary morphology of 116 fresh-frozen human cadaveric tibia using computed tomography. Anatomic landmarks were selected and custom MATLAB scripts were used to analyze the cross-sectional cortical and medullary morphology normalized to biomechanical length (BML). BML measured the distance between the tibial plateau and the tibial plafond. Properties such as cortical thickness, medullary diameter, and circularity of the medullary canal were quantified. We tested the influence of sex and laterality on morphology, and examined variations along the length of the bone. Results showed that while both sex and laterality impacted the location of anatomic landmarks, only sex influenced cross-sectional morphology. Overall, morphology significantly affected shape along the length of the bone for all examined properties except medullary circularity. This analysis found that distal to 35% BML, the canal is conducive to a circular implant, with medullary diameter ranging from 13 to 32 mm between 20 and 80% BML. A large size range is necessary for sufficient implant contact in order to accommodate residual limb length after amputation.
Collapse
Affiliation(s)
- Carolyn E Taylor
- Department of Orthopaedics, University of Utah, Salt Lake City, Utah, USA
- Department of Biomedical Engineering, University of Utah, Salt Lake City, Utah, USA
| | - Heath B Henninger
- Department of Orthopaedics, University of Utah, Salt Lake City, Utah, USA
- Department of Biomedical Engineering, University of Utah, Salt Lake City, Utah, USA
| | - Kent N Bachus
- Department of Orthopaedics, University of Utah, Salt Lake City, Utah, USA
- Department of Biomedical Engineering, University of Utah, Salt Lake City, Utah, USA
- Department of Veterans Affairs, Salt Lake City, Utah, USA
| |
Collapse
|