Biochemical and biophysical aspects of collagen nanostructure in the extracellular matrix

Discovery of non-genomic drivers of YAP signaling modulating the cell plasticity in CRC tumor lines

In normal intestines, a fetal/regenerative/revival cell state can be induced upon inflammation. This plasticity in cell fate is also one of the current topics in human colorectal cancer (CRC). To dissect the underlying mechanisms, we generated human CRC organoids with naturally selected genetic mutation profiles and exposed them to two different conditions by modulating the extracellular matrix (ECM). Among tested mutation profiles, a fetal/regenerative/revival state was induced following YAP activation via a collagen type I-enriched microenvironment. Mechanistically, YAP transcription was promoted by activating AP-1 and TEAD-dependent transcription and suppressing intestinal lineage-determining transcription via mechanotransduction. The phenotypic conversion was also involved in chemoresistance, which could be potentially resolved by targeting the underlying YAP regulatory elements, a potential target of CRC treatment.

Collagen biomaterials promote the regenerative repair of abdominal wall defects in Bama miniature pigs

Due to adhesion and rejection of recent traditional materials, it is still challenging to promote the regenerative repair of abdominal wall defects caused by different hernias or severe trauma. However, biomaterials with a high biocompatibility and low immunogenicity have exhibited great potential in the regeneration of abdominal muscle tissue. Previously, we have designed a biological collagen scaffold material combined with growth factor, which enables a fusion protein-collagen binding domain (CBD)-basic fibroblast growth factor (bFGF) to bind and release specifically. Though experiments in rodent animals have indicated the regeneration function of CBD-bFGF modified biological collagen scaffolds, its translational properties in large animals or humans are still in need of solid evidence. In this study, the abdominal wall defect model of Bama miniature pigs was established by artificial operations, and the defective abdominal wall was sealed with or without a polypropylene patch, and unmodified and CBD-bFGF modified biological collagen scaffolds. Results showed that a recurrent abdominal hernia was observed in the defect control group (without the use of mesh). Although the polypropylene patch can repair the abdominal wall defect, it also induced serious adhesion and inflammation. Meanwhile, both kinds of collagen biomaterials exhibited positive effects in repairing abdominal wall defects and reducing regional adhesion and inflammation. However, CBD-bFGF-modified collagen biomaterials failed to induce the regenerative repair reported in rat experiments. In addition, unmodified collagen biomaterials induced abdominal wall muscle regeneration rather than fibrotic repair. These results indicated that the unmodified collagen biomaterials are a better option among translational patches for the treatment of abdominal wall defects.

The relationship between cancer and biomechanics

The onset, development, diagnosis, and treatment of cancer involve intricate interactions among various factors, spanning the realms of mechanics, physics, chemistry, and biology. Within our bodies, cells are subject to a variety of forces such as gravity, magnetism, tension, compression, shear stress, and biological static force/hydrostatic pressure. These forces are perceived by mechanoreceptors as mechanical signals, which are then transmitted to cells through a process known as mechanical transduction. During tumor development, invasion and metastasis, there are significant biomechanical influences on various aspects such as tumor angiogenesis, interactions between tumor cells and the extracellular matrix (ECM), interactions between tumor cells and other cells, and interactions between tumor cells and the circulatory system and vasculature. The tumor microenvironment comprises a complex interplay of cells, ECM and vasculature, with the ECM, comprising collagen, fibronectins, integrins, laminins and matrix metalloproteinases, acting as a critical mediator of mechanical properties and a key component within the mechanical signaling pathway. The vasculature exerts appropriate shear forces on tumor cells, enabling their escape from immune surveillance, facilitating their dissemination in the bloodstream, dictating the trajectory of circulating tumor cells (CTCs) and playing a pivotal role in regulating adhesion to the vessel wall. Tumor biomechanics plays a critical role in tumor progression and metastasis, as alterations in biomechanical properties throughout the malignant transformation process trigger a cascade of changes in cellular behavior and the tumor microenvironment, ultimately culminating in the malignant biological behavior of the tumor.

Facile In Situ Assembly of Nanofibers within Three-Dimensional Porous Matrices with Arbitrary Characteristics for Creating Biomimetic Architectures

It is challenging to recapitulate the natural extracellular matrix's hierarchical nano/microfibrous three-dimensional (3D) structure with multilevel pores, good mechanical and hydrophilic properties, and excellent bioactivity for designing and developing advanced biomimetic materials. This work reports a new facile strategy for the scalable manufacturing of such a 3D architecture. Natural polymers in an aqueous solution are interpenetrated into a 3D microfibrous matrix with arbitrary shapes and property characteristics to self-assemble in situ into a nanofibrous network. The collagen fiber-like hierarchical structure and interconnected multilevel pores are achieved by self-assembly of the formed nanofibers within the 3D matrix, triggered by a simple cross-linking treatment. The as-prepared alginate/polypropylene biomimetic matrices are bioactive and have a tunable mechanical property (compressive modulus from ∼17 to ∼24 kPa) and a tunable hydrophilicity (water contact angle from ∼94° to 63°). This facile and versatile strategy allows eco-friendly and scalable manufacturing of diverse biomimetic matrices or modification of any existing porous matrices using different polymers.

Hyaluronic acid and multiwalled carbon nanotubes as bioink additives for cartilage tissue engineering

Articular cartilage and meniscus injuries are prevalent disorders with insufficient regeneration responses offered by available treatment methods. In this regard, 3D bioprinting has emerged as one of the most promising new technologies, offering novel treatment options. Additionally, the latest achievements from the fields of biomaterials and tissue engineering research identified constituents facilitating the creation of biocompatible scaffolds. In this study, we looked closer at hyaluronic acid and multi-walled carbon nanotubes as bioink additives. Firstly, we assessed the minimal concentrations that stimulate cell viability, and decrease reactive oxygen species and apoptosis levels in 2D cell cultures of normal human knee articular chondrocytes (NHAC) and human adipose-derived mesenchymal stem cells (hMSC-AT). In this regard, 0.25 mg/ml of hyaluronic acid and 0.0625 mg/ml of carbon nanotubes were selected as the most optimal concentrations. In addition, we investigated the protective influence of 2-phospho-L-ascorbic acid in samples with carbon nanotubes. Tests conducted on 3D bioprinted constructs revealed that only a combination of components positively impacted cell viability throughout the whole experiment. Gene expression analysis of COL1A1, COL6A1, HIF1A, COMP, RUNX2, and POU5F1 showed significant changes in the expression of all analyzed genes with a progressive overall loss of transcriptional activity in most of them.

3D bioprinting optimization of human mesenchymal stromal cell laden gelatin-alginate-collagen bioink

3D bioprinting technology has gained increased attention in the regenerative medicine and tissue engineering communities over the past decade with their attempts to create functional living tissues and organsde novo. While tissues such as skin, bone, and cartilage have been successfully fabricated using 3D bioprinting, there are still many technical and process driven challenges that must be overcome before a complete tissue engineered solution is realized. Although there may never be a single adopted bioprinting process in the scientific community, adherence to optimized bioprinting protocols could reduce variability and improve precision with the goal of ensuring high quality printed constructs. Here, we report on the bioprinting of a gelatin-alginate-collagen bioink containing human mesenchymal stromal cells (hMSCs) which has been optimized to ensure printing consistency and reliability. The study consists of three phases: a pre-printing phase which focuses on bioink characterization; a printing phase which focuses on bioink extrudability/printability, construct stability, and printing accuracy; and a post-processing phase which focuses on the homogeneity and bioactivity of the encapsulated hMSC printed constructs. The results showed that eight identical constructs containing hMSCs could be reliably and accurately printed into stable cross-hatched structures with a single material preparation, and that batch-to-batch consistency was accurately maintained across all preparations. Analysis of the proliferation, morphology, and differentiation of encapsulated hMSCs within the printed constructs showed that cells were able to form large,interconnected colonies and were capable of robust adipogenic differentiation within 14 d of culturing.

The Oncopig as an Emerging Model to Investigate Copper Regulation in Cancer

Emerging evidence points to several fundamental contributions that copper (Cu) has to promote the development of human pathologies such as cancer. These recent and increasing identification of the roles of Cu in cancer biology highlights a promising field in the development of novel strategies against cancer. Cu and its network of regulatory proteins are involved in many different contextual aspects of cancer from driving cell signaling, modulating cell cycle progression, establishing the epithelial-mesenchymal transition, and promoting tumor growth and metastasis. Human cancer research in general requires refined models to bridge the gap between basic science research and meaningful clinical trials. Classic studies in cultured cancer cell lines and animal models such as mice and rats often present caveats when extended to humans due to inherent genetic and physiological differences. However, larger animal models such as pigs are emerging as more appropriate tools for translational research as they present more similarities with humans in terms of genetics, anatomical structures, organ sizes, and pathological manifestations of diseases like cancer. These similarities make porcine models well-suited for addressing long standing questions in cancer biology as well as in the arena of novel drug and therapeutic development against human cancers. With the emergent roles of Cu in human health and pathology, the pig presents an emerging and valuable model to further investigate the contributions of this metal to human cancers. The Oncopig Cancer Model is a transgenic swine model that recapitulates human cancer through development of site and cell specific tumors. In this review, we briefly outline the relationship between Cu and cancer, and how the novel Oncopig Cancer Model may be used to provide a better understanding of the mechanisms and causal relationships between Cu and molecular targets involved in cancer.

COL11A1 as a potential prognostic target for oral squamous cell carcinoma

Oral squamous cell carcinoma (OSCC) is a malignant tumor occurring in the oral cavity. However, the molecular mechanism of OSCC is not clear. Bioinformatics was used to screen and identify role of collagen type X1 alpha 1 (COL11A1) on OSCC. 200 patients with OSCC were recruited. Clinical and follow-up data were recorded and COL11A1 expression levels were tested. Pearson chi-square test and Spearman correlation coefficient were used to analyze relationship between prognosis and related parameters in patients with OSCC. Univariate and multivariate Logistic regression, univariate and multivariate Cox proportional risk regression were used for further analysis, survival curve was drawn. Through bioinformatics analysis, OSCC patients with higher expression of COL11A1 have poor overall survival compare with OSCC patients with lower expression of COL11A1 (hazard ratios [HR] = 1.32, P = .047). Pearson chi-square test showed that age (P = .011), tumor grade (P = .023), COL11A1 (P < .001) was significantly correlated with prognosis of OSCC. Univariate Logistic regression analysis showed age (odds ratio [OR] = 2.102, 95% confidence intervals [95%CI]: 1.180-3.746, P = .012), tumor grade (OR = 1.919, 95%CI: 1.093-3.372, P = .023) and COL11A1 (OR = 12.775, 95%CI: 6.509-25.071, P < .001). Multivariate Logistic regression analysis showed that COL11A1 (OR = 12.066, 95%CI: 6.042-24.096, P < .001) was significantly associated with prognosis of patients with OSCC. Univariate Cox regression analysis showed that age (HR = 1.592, 95%CI: 1.150-2.205, P = .005), tumor grade (HR = 1.460, 95%CI: 1.067-1.999, P = .018) and COL11A1 (HR = 1.848, 95%CI: 1.340-2.548, P < .001) were significantly correlated with survival time of OSCC patients. Multivariate Cox regression analysis showed that tumor grade (HR = 1.466, 95%CI: 1.064-2.020, P = .019) and COL11A1 (HR = 1.645, 95%CI: 1.164-2.325, P = .005) were significantly correlated with survival time of OSCC patients. COL11A1 is significantly correlated with occurrence of OSCC. When COL11A1 is highly expressed, prognosis of patients with OSCC is worse and the survival time is shorter.

Correlation of Matrisome-Associatted Gene Expressions with LOX Family Members in Astrocytomas Stratified by IDH Mutation Status

Tumor cell infiltrative ability into surrounding brain tissue is a characteristic of diffusely infiltrative astrocytoma and is strongly associated with extracellular matrix (ECM) stiffness. Collagens are the most abundant ECM scaffolding proteins and contribute to matrix organization and stiffness. LOX family members, copper-dependent amine oxidases, participate in the collagen and elastin crosslinking that determine ECM tensile strength. Common IDH mutations in lower-grade gliomas (LGG) impact prognosis and have been associated with ECM stiffness. We analyzed the expression levels of LOX family members and matrisome-associated genes in astrocytoma stratified by malignancy grade and IDH mutation status. A progressive increase in expression of all five LOX family members according to malignancy grade was found. LOX, LOXL1, and LOXL3 expression correlated with matrisome gene expressions. LOXL1 correlations were detected in LGG with IDH mutation (IDH^mut), LOXL3 correlations in LGG with IDH wild type (IDH^wt) and strong LOX correlations in glioblastoma (GBM) were found. These increasing correlations may explain the increment of ECM stiffness and tumor aggressiveness from LGG-IDH^mut and LGG-IDH^wt through to GBM. The expression of the mechanosensitive transcription factor, β-catenin, also increased with malignancy grade and was correlated with LOXL1 and LOXL3 expression, suggesting involvement of this factor in the outside–in signaling pathway.

Stem Cell Based Approaches to Modulate the Matrix Milieu in Vascular Disorders

The extracellular matrix (ECM) represents a complex and dynamic framework for cells, characterized by tissue-specific biophysical, mechanical, and biochemical properties. ECM components in vascular tissues provide structural support to vascular cells and modulate their function through interaction with specific cell-surface receptors. ECM–cell interactions, together with neurotransmitters, cytokines, hormones and mechanical forces imposed by blood flow, modulate the structural organization of the vascular wall. Changes in the ECM microenvironment, as in post-injury degradation or remodeling, lead to both altered tissue function and exacerbation of vascular pathologies. Regeneration and repair of the ECM are thus critical toward reinstating vascular homeostasis. The self-renewal and transdifferentiating potential of stem cells (SCs) into other cell lineages represents a potentially useful approach in regenerative medicine, and SC-based approaches hold great promise in the development of novel therapeutics toward ECM repair. Certain adult SCs, including mesenchymal stem cells (MSCs), possess a broader plasticity and differentiation potential, and thus represent a viable option for SC-based therapeutics. However, there are significant challenges to SC therapies including, but not limited to cell processing and scaleup, quality control, phenotypic integrity in a disease milieu in vivo, and inefficient delivery to the site of tissue injury. SC-derived or -inspired strategies as a putative surrogate for conventional cell therapy are thus gaining momentum. In this article, we review current knowledge on the patho-mechanistic roles of ECM components in common vascular disorders and the prospects of developing adult SC based/inspired therapies to modulate the vascular tissue environment and reinstate vessel homeostasis in these disorders.

Clinical study of injectable collagen scaffold with autologous fat cells for repair of severe vocal fold injury

Cell retention and survival after transplantation remains a major problem for long-term efficiency in therapy of severe vocal fold injury with autologous cells. In this study, injectable collagen scaffold was used to deliver autologous fat cells (AFCs) for repairing of severe vocal fold injury. We found injectable collagen scaffold could enhance the retention and survival of green fluorescent protein (GFP) labeled fat cells in the transplantation sites in rats. Based on these data, a randomized controlled clinical trial was conducted to evaluate the safety and efficiency of transplantation of collagen scaffold with AFCs for severe vocal fold injury. Ten patients with vocal fold paralysis were randomly assigned to control (AFCs only) and intervention (AFCs + collagen) groups. AFCs with or without collagen scaffold were injected into vocal folds of patients under general anesthesia, respectively. The safety and efficacy were regularly assessed during 24 months post-surgery. No obvious complications occurred in all patients during the follow-up. The collagen scaffold maintained the stability of implants after injection and reconstructed the vocal fold structure. The improvement of voice quality of patients was observed through voice quality evaluation with the voice handicap index (VHI) questionnaire, as well as acoustic analysis of maximum phonation time, jitter, and shimmer. The VHI score of patients in AFCs + collagen group improved significantly than those in AFCs group at 6, 12 and 24 months post-surgery. It demonstrates the injectable collagen scaffold is safe and efficient for delivering AFCs for vocal fold injury.

Stiffness of tongue squamous cell carcinoma measured using strain elastography correlates with the amount of collagen fibers in the tumor

OBJECTIVES

To evaluate the stiffness of tongue squamous cell carcinoma (TSCC) using ultrasound strain elastography, a relatively new sonographic imaging technique, and to identify the factors that affect this stiffness.

METHODS

We treated 62 patients diagnosed with muscle invasive TSCC, who were treated at the department of oral surgery of our institution. Each patient's tumor stiffness was semi-quantified according to the ratio of cancer to tongue muscle strain measured using ultrasound strain elastography (the strain ratio). Histopathological diagnosis was made on the same section as the ultrasound strain elastography. We set the following histopathological parameters: cancer cell content in the tumor area (%CCC), collagen fiber content in the tumor area (%CFC), and tumor-infiltrating inflammatory cell content in the stromal compartment (%TIIC). Spearman's rank correlation (rs) was used to assess correlations, and P values < 0.05 were considered significant.

RESULTS

The mean strain ratio was 9.7 ± 9.8. The mean %CCC was 38.4 ± 11.3%, and % CFC was 31.1 ± 7.8%, % TIICs was 19.9 ± 8.9%. Log (strain ratio) by ultrasound strain elastography was positively correlated with %CFC (r_s = 0.379, P = 0.024). %CFC was negatively correlated with %TIICs (r_s =  - 0.318, P = 0.012). No correlations were observed between other clinico-histopathological factors and either strain ratio, or %CFC.

CONCLUSION

The strain ratio of the cancer to the strain of the tongue muscle measured through ultrasound strain elastography positively correlates with the collagen fiber content of the tumor area.

Engineering and Characterization of a Biomimetic Microchip for Differentiating Mouse Adipocytes in a 3D Microenvironment

Although two-dimensional (2D) cell cultures are the standard in cell research, one pivotal disadvantage is the lack of cell-cell and cell-extracellular matrix (ECM) signaling in the culture milieu. However, such signals occur in three-dimensional (3D) in vivo environments and are essential for cell differentiation, proliferation, and a range of cellular functions. In this study, we developed a microfluidic device to proliferate and differentiate functional adipose tissue and adipocytes by utilizing 3D cell culture technology. This device was used to generate a tissue-specific 3D microenvironment to differentiate 3T3-L1 preadipocytes into either visceral white adipocytes using visceral adipose tissue (VAT) or subcutaneous white adipose tissue (SAT). The microchip has been tested and validated by functional assessments including cell morphology, inflammatory response to a lipopolysaccharide (LPS) challenge, GLUT4 tracking, and gene expression analyses. The biomimetic microfluidic chip is expected to mimic functional adipose tissues that can replace 2D cell cultures and allow for more accurate analysis of adipose tissue physiology.

Improvement of collagen self-assembly and thermal stability in the presence of trehalose

Trehalose, as a compatible osmolyte, can stabilize collagen and is beneficial to the self-assembly and mechanical properties of its products.

Transcriptional control of a collagen deposition and adhesion process that promotes lung adenocarcinoma growth and metastasis

A fibrotic stroma accumulates in advanced cancers, and invasive cancer cells migrate along collagen fibers that facilitate dissemination from the primary tumor. However, the ways in which tumor cells govern these processes remain unclear. Here, we report that the epithelial-mesenchymal transition–activating transcription factor ZEB1 increased type I collagen (Col1) secretion and enhanced tumor cell adherence to Col1. Mechanistically, ZEB1 increased the levels of α₁β₁ integrin (encoded by Itga1 and Itgb1) by inhibiting PP2A activity, which reduced nuclear accumulation of HDAC4 and, thereby, derepressed Itga1 gene transcription. In parallel, ZEB1 relieved the miRNA-148a-mediated silencing of Itga1. High levels of Itga1 enhanced tumor cell adherence to Col1 and were essential for Col1-induced tumor growth and metastasis. Furthermore, ZEB1 enhanced Col1 secretion by increasing the expression of a kinesin protein that facilitated transport and secretion of Col1-containing vesicles. Our findings elucidate a transcriptional mechanism by which lung adenocarcinoma cells coordinate a collagen deposition and adhesion process that facilitates tumor progression.

Expression of mRNA vascular endothelial growth factor in hypospadias patients

Background

Hypospadias is a relatively common genital anomaly in humans, usually followed by inelastic dartos that causes penile chordee. Vascular endothelial growth factor (VEGF) is strongly linked to the viscoelasticity of tissues and their elastic phase. This study aimed to evaluate VEGF expressions in (1) fascia dartos between hypospadias and controls and (2) chordee severity.

Methods

This prospective cohort study involved 65 specimens from patients with hypospadias and ten specimens from controls. The samples were analyzed by quantitative real-time polymerase chain reaction (qPCR) for VEGF expression.

Results

The expressions of VEGF were not different between proximal and distal hypospadias patients and controls (fold change: distal − 0.25; fold change: proximal − 0.2; p = 0.664). The scaled expressions related to chordee severity were mild − 0.1; moderate 0.1; severe − 0.25 (p = 0.660).

Conclusions

VEGF expressions might not affect the severity of hypospadias and chordee, implying the pathogenesis is complex involving many growth factors. Further study with a larger sample size is necessary to clarify and confirm our findings.

Detection of Lysyl Oxidase Activity in Tumor Extracellular Matrix Using Peptide-Functionalized Gold Nanoprobes

Simple Summary

Although various malignant tumors express high levels of lysyl oxidase (LOX) and though its role in tumor progression is well-defined, there is a lack of sensing techniques to target LOX. This study highlights the application of peptide-functionalized gold nanoprobes for sensing the LOX levels in tumor microenvironments. The gold nanoparticles (AuNPs) in these nanoprobes aggregate upon exposure to LOX, resulting in a red shift of the surface plasmon resonance peak, accompanied by a characteristic color change. This colorimetric assay based on peptide-functionalized AuNP sensitively detects LOX secreted from various cancer cells not only in vitro but also in the tissue extract. In this study, the suggested analytical approach demonstrated high specificity to LOX and did not show any color change in the presence of other enzymes.

Abstract

High LOX levels in the tumor microenvironment causes the cross-linking of extracellular matrix components and increases the stiffness of tumor tissue. Thus, LOX plays an important role in tumorigenesis and in lowering the tumor response to anticancer drugs. Despite comprehensive efforts to identify the roles of LOX in the tumor microenvironment, sensitive and accurate detection methods have not yet been established. Here, we suggest the use of gold nanoparticles functionalized with LOX-sensitive peptides (LS-AuNPs) that aggregate upon exposure to LOX, resulting in a visual color change. LOX-sensitive peptides (LS-peptides) contain lysine residues that are converted to allysine in the presence of LOX, which is highly reactive and binds to adjacent allysine, resulting in the aggregation of the AuNPs. We demonstrated that the synthesized LS-AuNPs are capable of detecting LOX sensitively, specifically both in vitro and in the tissue extract. Moreover, the suggested LS-AuNP-based assay is more sensitive than commonly employed assays or commercially available kits. Therefore, the LS-AuNPs developed in this study can be used to detect LOX levels and can be further used to predict the stiffness or the anticancer drug resistance of the tumor.

Biomaterials for Soft Tissue Repair and Regeneration: A Focus on Italian Research in the Field

Tissue repair and regeneration is an interdisciplinary field focusing on developing bioactive substitutes aimed at restoring pristine functions of damaged, diseased tissues. Biomaterials, intended as those materials compatible with living tissues after in vivo administration, play a pivotal role in this area and they have been successfully studied and developed for several years. Namely, the researches focus on improving bio-inert biomaterials that well integrate in living tissues with no or minimal tissue response, or bioactive materials that influence biological response, stimulating new tissue re-growth. This review aims to gather and introduce, in the context of Italian scientific community, cutting-edge advancements in biomaterial science applied to tissue repair and regeneration. After introducing tissue repair and regeneration, the review focuses on biodegradable and biocompatible biomaterials such as collagen, polysaccharides, silk proteins, polyesters and their derivatives, characterized by the most promising outputs in biomedical science. Attention is pointed out also to those biomaterials exerting peculiar activities, e.g., antibacterial. The regulatory frame applied to pre-clinical and early clinical studies is also outlined by distinguishing between Advanced Therapy Medicinal Products and Medical Devices.

Depolymerization of hyaluronan using PEGylated human recombinant hyaluronidase promotes nanoparticle tumor penetration

Aim: Delivery of nanoparticles (NPs) to tumors can be impeded by high levels of hyaluronan (HA) in the stroma. Enzymatic depolymerization of HA with PEGylated hyaluronidase (PEGPH20) improves the delivery of antibodies to tumors. However, it is unknown whether NP delivery is enhanced by this strategy. Methods: The impact of PEGPH20 pretreatment on the uptake and tumor penetration of model PEGylated polystyrene NPs was studied in mice with orthotopic breast cancers. Results: Tumor oxygenation and NP penetration, but not overall tumor uptake, of 50 nm NPs, was significantly enhanced by PEGPH20 pre-administration. Conclusion: PEGPH20 has the potential to improve intratumoral penetration of NP-based drug delivery systems and enhance access to cancer cells in poorly vascularized regions of the tumor.

Overcoming Biological Barriers With Block Copolymers-Based Self-Assembled Nanocarriers. Recent Advances in Delivery of Anticancer Therapeutics

Cancer is one of the most common life-threatening illness and it is the world's second largest cause of death. Chemotherapeutic anticancer drugs have many disadvantages, which led to the need to develop novel strategies to overcome these shortcomings. Moreover, tumors are heterogenous in nature and there are various biological barriers that assist in treatment reisistance. In this sense, nanotechnology has provided new strategies for delivery of anticancer therapeutics. Recently, delivery platforms for overcoming biological barriers raised by tumor cells and tumor-bearing hosts have been reported. Among them, amphiphilic block copolymers (ABC)-based self-assembled nanocarriers have attracted researchers worldwide owing to their unique properties. In this work, we addressed different biological barriers for effective cancer treatment along with several strategies to overcome them by using ABC-based self-assembled nanostructures, with special emphasis in those that have the ability to act as responsive nanocarriers to internal or external environmental clues to trigger release of the payload. These nanocarriers have shown promising properties to revolutionize cancer treatment and diagnosis, but there are still challenges for their successful translation to clinical applications.

HuBiogel incorporated fibro-porous hybrid nanomatrix graft for vascular tissue interfaces

Native extracellular matrix (ECM) possesses the biochemical cues to promote cell survival. However, decellularized, the ECM loses its cell supporting mechanical integrity. We report, here, a novel biohybrid vascular graft of polycaprolactone (PCL), poliglecaprone (PGC) incorporated with human biomatrix as functional materials for vascular tissue interfacing by electrospinning, thus harnessing the biochemical cues from the ECM and the mechanical integrity of the polymer blends. The fabricated fibro-porous tubular small diameter graft (i.d. = 4 mm) from polymer blend was coated with a cocktail of collagenous matrix derived from human placenta called HuBiogel™. The compositional, morphological, and mechanical properties of graft were measured and compared with a non-coated tubular PCL/PGC graft using Fourier Transform infrared spectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). BCA assay was used to calculate the protein content and coating-uniformity throughout the hybrid graft. Mechanical properties such as tensile strength (1.6 MPa), Young's modulus (2.4 MPa), burst pressure (>1900 mmHg), and suture retention strength (2.3 N) of hybrid graft were found to be comparable to native blood vessels. Protein coating has improved the hydrophilicity and the biocompatibility (cell viability and cell-attachment) enhanced with human umbilical vein endothelial cells (HUVECs) seeded in vitro onto the lumen layer of the graft over two weeks. The overall results promise this new biohybrid graft to be a potential candidate for vascular tissue interface and regeneration.

Matrix vesicle biomimetics harboring Annexin A5 and alkaline phosphatase bind to the native collagen matrix produced by mineralizing vascular smooth muscle cells

BACKGOUND

Vascular smooth muscle cells (VSMCs) transdifferentiated ectopically trigger vascular calcifications, contributing to clinical cardiovascular disease in the aging population. AnxA5 and TNAP play a crucial role in (patho)physiological mineralization.

METHODS

We performed affinity studies between DPPC and 9:1 DPPC:DPPS-proteoliposomes carrying AnxA5 and/or TNAP and different types of collagen matrix: type I, II, I + III and native collagenous extracellular matrix (ECM) produced from VSMCs with or without differentiation, to simulate ectopic calcification conditions.

RESULTS

AnxA5-proteoliposomes had the highest affinity for collagens, specially for type II. TNAP-proteoliposomes bound poorly and the simultaneous presence of TNAP in the AnxA5-proteoliposomes disturbed interactions between AnxA5 and collagen. DPPC AnxA5-proteoliposomes affinities for ECM from transdifferentiating cells went up 2-fold compared to that from native VSMCs. The affinities of DPPC:DPPS-proteoliposomes were high for ECM from VSMCs with or without differentiation, underscoring a synergistic effect between AnxA5 and DPPS. Co-localization studies uncovered binding of proteoliposomes harboring AnxA5 or TNAP+AnxA5 to various regions of the ECM, not limited to type II collagen.

CONCLUSION

AnxA5-proteoliposomes showed the highest affinities for type II collagen, deposited during chondrocyte mineralization in joint cartilage. TNAP in the lipid/protein microenvironment disturbs interactions between AnxA5 and collagen. These findings support the hypothesis that TNAP is cleaved from the MVs membrane just before ECM binding, such facilitating MV anchoring to ECM via AnxA5 interaction.

GENERAL SIGNIFICANCE

Proteoliposomes as MV biomimetics are useful in the understanding of mechanisms that regulate the mineralization process and may be essential for the development of novel therapeutic strategies to prevent or inhibit ectopic mineralization.

Aspirin targets P4HA2 through inhibiting NF-κB and LMCD1-AS1/let-7g to inhibit tumour growth and collagen deposition in hepatocellular carcinoma

Background

Abnormal construction of the extracellular matrix (ECM) is intimately linked with carcinogenesis and the development of solid tumours, especially hepatocellular carcinoma (HCC). As the major component of the ECM, collagen plays a pivotal role in carcinogenesis. P4HA2, the essential enzyme during collagen formation, becomes an important target in HCC treatment. Here, we tried to decipher whether aspirin (ASA), a classic anti-inflammatory drug, could improve the prognosis of HCC through targeting P4HA2.

Methods

Western blotting, qRT-PCR assay, immunofluorescence staining, luciferase reporter gene assay, and ChIP assay were applied to demonstrate the molecular mechanism of the regulation of P4HA2 expression by aspirin. A mouse xenograft model, cell viability assay, colony formation assay, and immunohistochemistry analysis were used to evaluate the anti-fibrosis effect of aspirin through targeting the NF-κB/P4HA2 axis and LMCD1-AS1/let-7g/P4HA2 axis in vitro and in vivo. The TCGA database was used to evaluate the correlation among P4HA2, let-7g, LMCD1-AS1 and overall survival of HCC patients.

Findings

In xenograft mice, aspirin was capable of targeting P4HA2 to decrease collagen deposition, resulting in the inhibition of liver tumour growth. TCGA database analysis revealed the close association between a higher P4HA2 concentration in HCC patients and shorter overall survival or a higher cancer stage and the pathological grade. Mechanistically, NF-κB can bind to the promoter of P4HA2 to activate its transcription. Moreover, lncRNA LMCD1-AS1 functions as a molecular sponge of let-7g to post-transcriptionally induce the target gene of let-7g, namely, P4HA2.

Interpretation

Our findings disclose the novel role and regulatory mechanism of aspirin in the suppression of HCC by disrupting abnormal collagen deposition.

Funds

973 Program, National Natural Scientific Foundation of China, Fundamental Research Funds for the Central Universities, Project of Prevention and Control of Key Chronic Non-Infectious Diseases.

Demystifying the extracellular matrix and its proteolytic remodeling in the brain: structural and functional insights

The extracellular matrix (ECM) plays diverse roles in several physiological and pathological conditions. In the brain, the ECM is unique both in its composition and in functions. Furthermore, almost all the cells in the central nervous system contribute to different aspects of this intricate structure. Brain ECM, enriched with proteoglycans and other small proteins, aggregate into distinct structures around neurons and oligodendrocytes. These special structures have cardinal functions in the normal functioning of the brain, such as learning, memory, and synapse regulation. In this review, we have compiled the current knowledge about the structure and function of important ECM molecules in the brain and their proteolytic remodeling by matrix metalloproteinases and other enzymes, highlighting the special structures they form. In particular, the proteoglycans in brain ECM, which are essential for several vital functions, are emphasized in detail.

The matrix environmental and cell mechanical properties regulate cell migration and contribute to the invasive phenotype of cancer cells

The minimal structural unit of a solid tumor is a single cell or a cellular compartment such as the nucleus. A closer look inside the cells reveals that there are functional compartments or even structural domains determining the overall properties of a cell such as the mechanical phenotype. The mechanical interaction of these living cells leads to the complex organization such as compartments, tissues and organs of organisms including mammals. In contrast to passive non-living materials, living cells actively respond to the mechanical perturbations occurring in their microenvironment during diseases such as fibrosis and cancer. The transformation of single cancer cells in highly aggressive and hence malignant cancer cells during malignant cancer progression encompasses the basement membrane crossing, the invasion of connective tissue, the stroma microenvironments and transbarrier migration, which all require the immediate interaction of the aggressive and invasive cancer cells with the surrounding extracellular matrix environment including normal embedded neighboring cells. All these steps of the metastatic pathway seem to involve mechanical interactions between cancer cells and their microenvironment. The pathology of cancer due to a broad heterogeneity of cancer types is still not fully understood. Hence it is necessary to reveal the signaling pathways such as mechanotransduction pathways that seem to be commonly involved in the development and establishment of the metastatic and mechanical phenotype in several carcinoma cells. We still do not know whether there exist distinct metastatic genes regulating the progression of tumors. These metastatic genes may then be activated either during the progression of cancer by themselves on their migration path or in earlier stages of oncogenesis through activated oncogenes or inactivated tumor suppressor genes, both of which promote the metastatic phenotype. In more detail, the adhesion of cancer cells to their surrounding stroma induces the generation of intracellular contraction forces that deform their microenvironments by alignment of fibers. The amplitude of these forces can adapt to the mechanical properties of the microenvironment. Moreover, the adhesion strength of cancer cells seems to determine whether a cancer cell is able to migrate through connective tissue or across barriers such as the basement membrane or endothelial cell linings of blood or lymph vessels in order to metastasize. In turn, exposure of adherent cancer cells to physical forces, such as shear flow in vessels or compression forces around tumors, reinforces cell adhesion, regulates cell contractility and restructures the ordering of the local stroma matrix that leads subsequently to secretion of crosslinking proteins or matrix degrading enzymes. Hence invasive cancer cells alter the mechanical properties of their microenvironment. From a mechanobiological point-of-view, the recognized physical signals are transduced into biochemical signaling events that guide cellular responses such as cancer progression after the malignant transition of cancer cells from an epithelial and non-motile phenotype to a mesenchymal and motile (invasive) phenotype providing cellular motility. This transition can also be described as the physical attempt to relate this cancer cell transitional behavior to a T1 phase transition such as the jamming to unjamming transition. During the invasion of cancer cells, cell adaptation occurs to mechanical alterations of the local stroma, such as enhanced stroma upon fibrosis, and therefore we need to uncover underlying mechano-coupling and mechano-regulating functional processes that reinforce the invasion of cancer cells. Moreover, these mechanisms may also be responsible for the awakening of dormant residual cancer cells within the microenvironment. Physicists were initially tempted to consider the steps of the cancer metastasis cascade as single events caused by a single mechanical alteration of the overall properties of the cancer cell. However, this general and simple view has been challenged by the finding that several mechanical properties of cancer cells and their microenvironment influence each other and continuously contribute to tumor growth and cancer progression. In addition, basement membrane crossing, cell invasion and transbarrier migration during cancer progression is explained in physical terms by applying physical principles on living cells regardless of their complexity and individual differences of cancer types. As a novel approach, the impact of the individual microenvironment surrounding cancer cells is also included. Moreover, new theories and models are still needed to understand why certain cancers are malignant and aggressive, while others stay still benign. However, due to the broad variety of cancer types, there may be various pathways solely suitable for specific cancer types and distinct steps in the process of cancer progression. In this review, physical concepts and hypotheses of cancer initiation and progression including cancer cell basement membrane crossing, invasion and transbarrier migration are presented and discussed from a biophysical point-of-view. In addition, the crosstalk between cancer cells and a chronically altered microenvironment, such as fibrosis, is discussed including the basic physical concepts of fibrosis and the cellular responses to mechanical stress caused by the mechanically altered microenvironment. Here, is highlighted how biophysical approaches, both experimentally and theoretically, have an impact on classical hallmarks of cancer and fibrosis and how they contribute to the understanding of the regulation of cancer and its progression by sensing and responding to the physical environmental properties through mechanotransduction processes. Finally, this review discusses various physical models of cell migration such as blebbing, nuclear piston, protrusive force and unjamming transition migration modes and how they contribute to cancer progression. Moreover, these cellular migration modes are influenced by microenvironmental perturbances such as fibrosis that can induce mechanical alterations in cancer cells, which in turn may impact the environment. Hence, the classical hallmarks of cancer need to be refined by including biomechanical properties of cells, cell clusters and tissues and their microenvironment to understand mechano-regulatory processes within cancer cells and the entire organism.

Interplay Between LOX Enzymes and Integrins in the Tumor Microenvironment

Members of the lysyl oxidase (LOX) family are secreted copper-dependent amine oxidases that catalyze the covalent crosslinking of collagens and elastin in the extracellular matrix (ECM), an essential process for the structural integrity of all tissues. LOX enzymes can also remodel the tumor microenvironment and have been implicated in all stages of tumor initiation and progression of many cancer types. Changes in the ECM can influence several cancer cell phenotypes. Integrin adhesion complexes (IACs) physically connect cells with their microenvironment. This review article summarizes the main findings on the role of LOX proteins in modulating the tumor microenvironment, with a particular focus on how ECM changes are integrated by IACs to modulate cells behavior. Finally, we discuss how the development of selective LOX inhibitors may lead to novel and effective therapies in cancer treatment.

Physicochemical and Biocompatibility Properties of Type I Collagen from the Skin of Nile Tilapia (Oreochromis niloticus) for Biomedical Applications

The aim of this study is to investigate the physicochemical properties, biosafety, and biocompatibility of the collagen extract from the skin of Nile tilapia, and evaluate its use as a potential material for biomedical applications. Two extraction methods were used to obtain acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC) from tilapia skin. Amino acid composition, FTIR, and SDS-PAGE results showed that ASC and PSC were type I collagen. The molecular form of ASC and PSC is (α₁)₂α₂. The FTIR spectra of ASC and PSC were similar, and the characteristic peaks corresponding to amide A, amide B, amide I, amide II, and amide III were 3323 cm-1, 2931 cm-1, 1677 cm-1, 1546 cm-1, and 1242 cm-1, respectively. Denaturation temperatures (Td) were 36.1 °C and 34.4 °C, respectively. SEM images showed the loose and porous structure of collagen, indicting its physical foundation for use in applications of biomedical materials. Negative results were obtained in an endotoxin test. Proliferation rates of osteoblastic (MC3T3E1) cells and fibroblast (L929) cells from mouse and human umbilical vein endothelial cells (HUVEC) were increased in the collagen-treated group compared with the controls. Furthermore, the acute systemic toxicity test showed no acute systemic toxicity of the ASC and PSC collagen sponges. These findings indicated that the collagen from Nile tilapia skin is highly biocompatible in nature and could be used as a suitable biomedical material.

3D collagen microfibers stimulate the functionality of preadipocytes and maintain the phenotype of mature adipocytes for long term cultures

Although adipose tissue is one of the most abundant tissues of the human body, its reconstruction remains a competitive challenge. The conventional in vitro two or three-dimensional (2D or 3D) models of mature adipocytes unfortunately lead to their quick dedifferentiation after one week, and complete differentiation of adipose derived stem cells (ADSC) usually requires more than one month. In this context, we developed biomimetic 3D adipose tissues with high density collagen by mixing type I collagen microfibers with primary mouse mature adipocytes or human ADSC in transwells. These 3D-tissues ensured a better long-term maintained phenotype of unilocular mature adipocytes, compared to 2D, with a viability of 96 ± 2% at day 14 and a good perilipin immunostaining, - the protein necessary for stabilizing the fat vesicles. For comparison, in 2D culture, mature adipocytes released their fat until splitting their single adipose vesicle into several ones with significantly 4 times smaller size. Concerning ADSC, the adipogenic genes expression in 3D-tissues was found at least doubled throughout the differentiation (over 8 times higher for GLUT4 at day 21), along with it, almost 4 times larger fat vesicles were observed (10 ± 4 µm at day 14). Perilipin immunostaining and leptin secretion, the satiety protein, attested the significantly doubled better functionality of ADSC in 3D adipose tissues. These obtained long-term maintained phenotype and fast adipogenesis make this model relevant for either cosmetic/pharmaceutical assays or plastic surgery purposes. STATEMENT OF SIGNIFICANCE: Adipose tissue has important roles in our organism, providing energy from its lipids storage and secreting many vital proteins. However, its reconstruction in a functional in vitro adipose tissue is still a challenge. Mature adipocytes directly extracted from surgery liposuctions quickly lose their lipids after a week in vitro and the use of differentiated adipose stem cells is too time-consuming. We developed a new artificial fat tissue using collagen microfibers. These tissues allowed the maintenance of viable big unilocular mature adipocytes up to two weeks and the faster adipogenic differentiation of adipose stem cells. Moreover, the adipose functionality confirmed by perilipin and leptin assessments makes this model suitable for further applications in cosmetic/pharmaceutical drug assays or for tissue reconstruction.

Priming integrin α5 promotes human dental pulp stem cells odontogenic differentiation due to extracellular matrix deposition and amplified extracellular matrix-receptor activity

Our previous study showed that knocking down integrin α5 (ITGA5) expression by using a lentiviral vector in human dental pulp stem cells (DPSCs) led to weakening proliferation and migration capacity while enhanced odontogenic differentiation. To seek for possible clinical application, we investigated the effect of the ITGA5 priming synthetic cyclic peptide (SCP; GA-CRRETAWAC-GA) on proliferation, migration, and the odontogenic differentiation of DPSCs. Remarkably, the involved mechanism was explored by isobaric tag for relative and absolute quantitation proteomic technique, and the in vivo effect of ITGA5 was investigated by nude mice subcutaneous transplantation of cell and hydroxyapatite/β-tricalcium phosphate complex. Results showed that SCP weakened the proliferation and migration capacity while enhanced odontogenic differentiation of DPSCs as lentivirus. The phosphorylation of FAK, PI3K/AKT, and MEK1/2/ERK1/2, along with IGF2/IGFBP2 and Wnt/β-catenin signaling pathway play an important role in this process. Proteomic Gene Ontology and Kyoto Encyclopedia of Genes and Genomes enrichment analysis revealed the key role of extracellular matrix (ECM) and ECM-receptor activity pathway were involved. ECM constituents, secreted protein acidic and cysteine-rich (SPARC), lumican, vitronectin, prolargin, decorin, collagen type VI α1 chain (COL6A1), COL6A2, COL14A1, and COL5A1 were upregulated in the ITGA5-silenced group. Inhibited expression of ITGA5 in DPSCs increased osteoid tissue formation and stronger related genes expression in vivo. In conclusion, the ITGA5 priming peptide could promote DPSCs odontogenic differentiation as lentivirus. Proteomics and bioinformatic analysis revealed that this may be due to the deposition of ECM and amplified ECM-receptor activity, which could fuel the application process of utilizing priming ITGA5 on dental clinical practice.

Enhanced chondrogenic differentiation of bone marrow mesenchymal stem cells on gelatin/glycosaminoglycan electrospun nanofibers with different amount of glycosaminoglycan

Tissue engineering is a new technique to help damaged cartilage treatment using cells and scaffolds. In this study we tried to evaluate electrospun scaffolds composed of gelatin/glycosaminoglycan (G/GAG) blend nanofibers in chondrogenesis of bone marrow-derived mesenchymal stem cells (BMMSCs). Scaffolds were fabricated by electrospinning technique with different concentration of glycosaminoglycan (0%, 5%, 10%, and 15%) in gelatin matrix. BMMSCs were cultured on the scaffolds for chondrogenesis process. MTT assay was done for scaffold's biocompatibility and cells viability evaluation. Alcian blue staining was carried out to determine the release of GAG and reverse transcription polymerase chain reaction (RT-PCR) was done for expression of COL2A1 and also immunocytochemistry assay were used to confirm expression of type II collagen. Scaffold with 15% GAG showed better result for biocompatibility (p =0.02). Scanning electron microscopy (SEM) micrographs showed that MSCs have good attachment to the scaffolds. Alcian blue staining result confirmed that cells produce GAG during differentiation time different from GAG in the scaffolds. Also the results for RT-PCR showed the expression of COL2A1 marker. Immunocytochemistry assay for type II collagen confirm that this protein expressed. Scaffold comprising 15% GAG is better results for chondrogenesis and it can be a good applicant for cartilage tissue engineering. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 38-48, 2019.

Layers and Multilayers of Self-Assembled Polymers: Tunable Engineered Extracellular Matrix Coatings for Neural Cell Growth

Growing primary cells and tissue in long-term cultures, such as primary neural cell culture, presents many challenges. A critical component of any environment that supports neural cell growth in vivo is an appropriate 2-D surface or 3-D scaffold, typically in the form of a thin polymer layer that coats an underlying plastic or glass substrate and aims to mimic critical aspects of the extracellular matrix. A fundamental challenge to mimicking a hydrophilic, soft natural cell environment is that materials with these properties are typically fragile and are difficult to adhere to and stabilize on an underlying plastic or glass cell culture substrate. In this review, we highlight the current state of the art and overview recent developments of new artificial extracellular matrix (ECM) surfaces for in vitro neural cell culture. Notably, these materials aim to strike a balance between being hydrophilic and soft while also being thick, stable, robust, and bound well to the underlying surface to provide an effective surface to support long-term cell growth. We focus on improved surface and scaffold coating systems that can mimic the natural physicochemical properties that enhance neuronal survival and growth, applied as soft hydrophilic polymer coatings for both in vitro cell culture and for implantable neural probes and 3-D matrixes that aim to enhance stability and longevity to promote neural biocompatibility in vivo. With respect to future developments, we outline four emerging principles that serve to guide the development of polymer assemblies that function well as artificial ECMs: (a) design inspired by biological systems and (b) the employment of principles of aqueous soft bonding and self-assembly to achieve (c) a high-water-content gel-like coating that is stable over time in a biological environment and possesses (d) a low modulus to more closely mimic soft, compliant real biological tissue. We then highlight two emerging classes of thick material coatings that have successfully captured these guiding principles: layer-by-layer deposited water-soluble polymers (LbL) and silk fibroin (SF) materials. Both materials can be deposited from aqueous solution yet transition to a water-insoluble coating for long-term stability while retaining a softness and water content similar to those of biological materials. These materials hold great promise as next-generation biocompatible coatings for tissue engineers and for chemists and biologists within the biomedical field.

Novel fibrous collagen-based cream accelerates fibroblast growth for wound healing applications: in vitro and in vivo evaluation

The present study reports the development of a novel film-forming bovine collagenous cream (BCC) based on bovine collagen (BC). In this study, collagen was isolated from bovine forestomach tissue, a novel source, and a cream formulation was prepared using some other bioactive ingredients. The electrophoretic pattern of the BC was found to be similar to type I collagen. The purity of BC was examined by amino acid analysis, which confirmed the presence of atelocollagen. The physicochemical properties of BCC such as rheology, spreadability, and temperature stability were characterized. The antimicrobial activity was examined against Bacillus subtilis, Staphylococcus aureus, and Escherichia coli, and BCC displayed excellent inhibitory effect. In vitro biocompatibility studies using NIH 3T3 fibroblast cells showed enhanced cell viability. FACS analysis revealed the non-toxic nature of BCC toward cells. The cell morphology and proliferation on the BCC matrix was studied using SEM and fluorescence microscopy. The in vivo wound healing efficacy of the BCC as a topical wound dressing was demonstrated on full thickness excision wounds in rat models. The healing profile showed that the BCC significantly enhanced re-epithelialization, collagen deposition, and contraction in the wound healing process. The findings of this study provide a new opportunity for the utilization of the untapped byproducts of the meat industry for valorization. We expect that this kind of topical healing cream could be a potential candidate in wound management and future clinical needs.

Cell-material interactions in tendon tissue engineering

The interplay between cells and materials is a fundamental topic in biomaterial-based tissue regeneration. One of the principles for biomaterial development in tendon regeneration is to stimulate tenogenic differentiation of stem cells. To this end, efforts have been made to optimize the physicochemical and bio-mechanical properties of biomaterials for tendon tissue engineering. However, recent progress indicated that innate immune cells, especially macrophages, can also respond to the material cues and undergo phenotypical changes, which will either facilitate or hinder tissue regeneration. This process has been, to some extent, neglected by traditional strategies and may partially explain the unsatisfactory outcomes of previous studies; thus, more researchers have turned their focus on developing and designing immunoregenerative biomaterials to enhance tendon regeneration. In this review, we will first summarize the effects of material cues on tenogenic differentiation and paracrine secretion of stem cells. A brief introduction will also be made on how material cues can be manipulated for the regeneration of tendon-to-bone interface. Then, we will discuss the characteristics and influences of macrophages on the repair process of tendon healing and how they respond to different materials cues. These principles may benefit the development of novel biomaterials provided with combinative bioactive cues to activate tenogenic differentiation of stem cells and pro-resolving macrophage phenotype.

STATEMENT OF SIGNIFICANCE

The progress achieved with the rapid development of biomaterial-based strategies for tendon regeneration has not yielded broad benefits to clinical patients. In addition to the interplay between stem cells and biomaterials, the innate immune response to biomaterials also plays a determinant role in tissue regeneration. Here, we propose that fine-tuning of stem cell behaviors and alternative activation of macrophages through material cues may lead to effective tendon/ligament regeneration. We first review the characteristics of key material cues that have been manipulated to promote tenogenic differentiation and paracrine secretion of stem cells in tendon regeneration. Then, we discuss the potentiality of corresponding material cues in activating macrophages toward a pro-resolving phenotype to promote tissue repair.

Microfabrication-Based Three-Dimensional (3-D) Extracellular Matrix Microenvironments for Cancer and Other Diseases

Exploring the complicated development of tumors and metastases needs a deep understanding of the physical and biological interactions between cancer cells and their surrounding microenvironments. One of the major challenges is the ability to mimic the complex 3-D tissue microenvironment that particularly influences cell proliferation, migration, invasion, and apoptosis in relation to the extracellular matrix (ECM). Traditional cell culture is unable to create 3-D cell scaffolds resembling tissue complexity and functions, and, in the past, many efforts were made to realize the goal of obtaining cell clusters in hydrogels. However, the available methods still lack a precise control of cell external microenvironments. Recently, the rapid development of microfabrication techniques, such as 3-D printing, microfluidics, and photochemistry, has offered great advantages in reconstructing 3-D controllable cancer cell microenvironments in vitro. Consequently, various biofunctionalized hydrogels have become the ideal candidates to help the researchers acquire some new insights into various diseases. Our review will discuss some important studies and the latest progress regarding the above approaches for the production of 3-D ECM structures for cancer and other diseases. Especially, we will focus on new discoveries regarding the impact of the ECM on different aspects of cancer metastasis, e.g., collective invasion, enhanced intravasation by stress and aligned collagen fibers, angiogenesis regulation, as well as on drug screening.

The role of extracellular matrix stiffness in megakaryocyte and platelet development and function

The extracellular matrix (ECM) is a key acellular structure in constant remodeling to provide tissue cohesion and rigidity. Deregulation of the balance between matrix deposition, degradation, and crosslinking results in fibrosis. Bone marrow fibrosis (BMF) is associated with several malignant and nonmalignant pathologies severely affecting blood cell production. BMF results from abnormal deposition of collagen fibers and enhanced lysyl oxidase-mediated ECM crosslinking within the marrow, thereby increasing marrow stiffness. Bone marrow stiffness has been recently recognized as an important regulator of blood cell development, notably by modifying the fate and differentiation process of hematopoietic or mesenchymal stem cells. This review surveys the different components of the ECM and their influence on stem cell development, with a focus on the impact of the ECM composition and stiffness on the megakaryocytic lineage in health and disease. Megakaryocyte maturation and the biogenesis of their progeny, the platelets, are thought to respond to environmental mechanical forces through a number of mechanosensors, including integrins and mechanosensitive ion channels, reviewed here.

The Potential of Stem Cells in Treatment of Traumatic Brain Injury

PURPOSE OF REVIEW

Traumatic brain injury (TBI) is a global public health concern, with limited treatment options available. Despite improving survival rate after TBI, treatment is lacking for brain functional recovery and structural repair in clinic. Recent studies have suggested that the mature brain harbors neural stem cells which have regenerative capacity following brain insults. Much progress has been made in preclinical TBI model studies in understanding the behaviors, functions, and regulatory mechanisms of neural stem cells in the injured brain. Different strategies targeting these cell population have been assessed in TBI models. In parallel, cell transplantation strategy using a wide range of stem cells has been explored for TBI treatment in pre-clinical studies and some in clinical trials. This review summarized strategies which have been explored to enhance endogenous neural stem cell-mediated regeneration and recent development in cell transplantation studies for post-TBI brain repair.

RECENT FINDINGS

Thus far, neural regeneration through neural stem cells either by modulating endogenous neural stem cells or by stem cell transplantation has attracted much attention. It is highly speculated that targeting neural stem cells could be a potential strategy to repair and regenerate the injured brain. Neuroprotection and neuroregeneration are major aspects for TBI therapeutic development. With technique advancement, it is hoped that stem cell-based therapy targeting neuroregeneration will be able to translate to clinic in not so far future.

Hic-5 regulates fibrillar adhesion formation to control tumor extracellular matrix remodeling through interaction with tensin1

The linearization of the stromal extracellular matrix (ECM) by cancer associated fibroblasts (CAFs) facilitates tumor cell growth and metastasis. However, the mechanism by which the ECM is remodeled is not fully understood. Hic-5 (TGFβ1i1), a focal adhesion scaffold protein, has previously been reported to be crucial for stromal ECM deposition and remodeling in vivo. Herein we show that CAFs lacking Hic-5 exhibit a significant reduction in the ability to form fibrillar adhesions, a specialized form of focal adhesion that promote fibronectin fibrillogenesis. Hic-5 was found to promote fibrillar adhesion formation through a newly characterized interaction with tensin1. Furthermore, Src dependent phosphorylation of Hic-5 facilitated the interaction with tensin1 to prevent β1 integrin internalization and trafficking to the lysosome. The interaction between Hic-5 and tensin1 was mechanosensitive, promoting fibrillar adhesion formation and fibronectin fibrillogenesis in a rigidity dependent fashion. Importantly, this Src dependent mechanism was conserved in three-dimensional (3D) ECM environments. Immunohistochemistry of tensin1 showed enrichment in CAFs in vivo, which was abrogated upon deletion of Hic-5. Interestingly, elevated Hic-5 expression correlates with reduced distant metastasis free survival in patients with basal-like, HER2+ and grade 3 tumors. Thus, we have identified Hic-5 as a crucial regulator of ECM remodeling in CAFs by promoting fibrillar adhesion formation through a novel interaction with tensin1.

Effect of carboxymethylcellulose on fibril formation of collagen in vitro

The effect of carboxymethylcellulose (CMC) on the fibril formation of collagen in vitro was studied by turbidity measurements and atomic force microscopy (AFM). The kinetics curves of fibril formation indicated that the rate of collagen fibrillogenesis was decreased with the addition of CMC, meanwhile the final turbidity was obviously increased as the CMC/collagen ratio reached 30%. The AFM images of collagen-CMC solutions showed that the number of nucleation sites of collagen fibrillogenesis was significantly increased with the presence of CMC, while the diameter of immature collagen fibrils was obviously decreased. Moreover, the thermal stability of collagen fibril hydrogels was obviously improved with the presence of CMC. In addition, the morphologies of collagen fibrils observed by AFM revealed that the adjacent fibril segments or fibrils were intertwisted and even tightly merged, probably due to the hydrogen bonding and molecular entanglement interactions between CMC and collagen molecules.

Kindlin-2 could influence breast nodule elasticity and improve lymph node metastasis in invasive breast cancer

This study investigated the relationship between quantitative parameters of shear wave elastography (SWE, maximum elasticity [Emax], minimum elasticity [Emin], mean elasticity [Emean]), collagen intensity and Kindlin-2 expression in benign and malignant breast nodules, and if Kindlin-2 expression is related with lymph node metastasis. A total of 102 breast nodules from 102 patients were included in our study who underwent ultrasound elastography before surgery or core needle biopsy. There was a significant difference between benign and malignant breast nodules in Emax, Emean, collagen intensity and Kindlin-2 expression, but it had no difference in Emin. Collagen intensity and Kindlin-2 expression both correlated positively with Emax, but not with Emean. Among 38 malignant breast nodules, the average Emax of the metastasis group was higher than that of the non-metastasis group, but it had no statistical significance. Compared with the non-metastasis group, Kindlin-2 expression was considerably higher in the metastasis group. However, there was no difference in collagen intensity between the metastasis group and the non-metastasis group. In conclusion, Kindlin-2 and collagen might contribute to breast nodule elasticity through molecular mechanisms. In breast cancer, overexpression of Kindlin-2 might be a risk factor for lymph node metastasis.

Differential Depth Sensing Reduces Cancer Cell Proliferation via Rho-Rac-Regulated Invadopodia

Bone, which is composed of a porous matrix, is one of the principal secondary locations for cancer. However, little is known about the effect of this porous microenvironment in regulating cancer cell proliferation. Here, we examine how the depth of the pores can transduce a mechanical signal and reduce the proliferation of noncancer breast epithelial cells (MCF-10A) and malignant breast cancer cells (MDA-MB-231 and MCF-7) using micrometer-scale topographic features. Interestingly, cells extend actin-rich protrusions, such as invadopodia, to sense the depth of the matrix pore and activate actomyosin contractility to decrease MCF-10A proliferation. However, in MDA-MB-231, depth sensing inactivates Rho-Rac-regulated actomyosin contractility and phospho-ERK signaling. Inhibiting contractility on this porous matrix using blebbistatin further reduces MDA-MB-231 proliferation. Our findings support the notion of mechanically induced dormancy through depth sensing, where invadopodia-mediated depth sensing can inhibit the proliferation of noncancer and malignant breast cancer cells through differential regulation of actomyosin contractility.

Nanoparticle design strategies for enhanced anticancer therapy by exploiting the tumour microenvironment

Nanovehicles can efficiently carry and deliver anticancer agents to tumour sites. Compared with normal tissue, the tumour microenvironment has some unique properties, such as vascular abnormalities, hypoxia and acidic pH. There are many types of cells, including tumour cells, macrophages, immune and fibroblast cells, fed by defective blood vessels in the solid tumour. Exploiting the tumour microenvironment can benefit the design of nanoparticles for enhanced therapeutic effectiveness. In this review article, we summarized the recent progress in various nanoformulations for cancer therapy, with a special emphasis on tumour microenvironment stimuli-responsive ones. Numerous tumour microenvironment modulation strategies with promising cancer therapeutic efficacy have also been highlighted. Future challenges and opportunities of design consideration are also discussed in detail. We believe that these tumour microenvironment modulation strategies offer a good chance for the practical translation of nanoparticle formulas into clinic.

Development of In Vitro Embryo Production System Using Collagen Matrix Gel Attached with Vascular Endothelial Growth Factor Derived from Interleukin-1 Beta-Treated Porcine Endometrial Tissue

The aim of this study was to establish an embryo culture system using collagen gel attached with vascular endothelial growth factor (VEGF) derived from interleukin-1 beta (IL-1β)-treated endometrial tissues from pigs. Endometria were separated from the porcine uterus at the follicular phase of the estrous cycle and were cultured with IL-1β. The collagen gels coincubated with IL-1β-treated endometria (C, without endometrial tissue; CE, with endometrial tissue; and CEI, IL-1β-treated endometrial tissue) were used for embryo culture. We found that, compared with the comparable figures in the control group, prostaglandin synthase-2 (PTGS-2) mRNA was increased in IL-1β-treated endometrial tissue (p < 0.05). The VEGF protein was not observed in collagen gel coincubated without endometrial tissue (C); however, it was detected in collagen gels coincubated with endometrial tissue (CE and CEI). The embryo cleavage rates and blastocyst formation did not differ among the treatment groups. The proportion of blastocysts did not differ among the groups. However, the number of blastocyst cells was significantly (p < 0.05) higher in the CEI group than in the other groups. These results clarify the effects of the intrauterine environment on preimplantation embryos and may be useful in research on the effects of extracellular matrix- and cytokine-treated endometrial tissue on embryo development.

Effect of γ-PGA on the formation of collagen fibrils in vitro

The effect of γ-poly(glutamic acid) (γ-PGA) on the self-assembly of collagen was studied. Under physiological conditions, the kinetic curves for fibril formation showed that the turbidity of collagen/γ-PGA blends at 313 nm was increased with the addition of γ-PGA. Furthermore, it was shown using both field-emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) that fibrils with a larger diameter were obtained following the addition of γ-PGA, probably due to the electrostatic and hydrogen bond interactions between collagen and γ-PGA, which promoted the lateral association of collagen molecules. In addition, both the thermal stability and viscoelastic properties of the hybrid hydrogels, which were evaluated by differential scanning calorimetry and rheological measurements, respectively, were improved by the addition of γ-PGA.

Co‑delivery and controlled release of stromal cell‑derived factor‑1α chemically conjugated on collagen scaffolds enhances bone morphogenetic protein‑2‑driven osteogenesis in rats

There has been considerable focus in investigations on the delivery systems and clinical applications of bone morphogenetic protein-2 (BMP-2) for novel bone formation. However, current delivery systems require high levels of BMP-2 to exert a biological function. There are several concerns in using of high levels of BMP-2, including safety and the high cost of treatment. Therefore, the development of strategies to decrease the levels of BMP-2 required in these delivery systems is required. In our previous studies, a controlled-release system was developed, which used Traut's reagent and the cross-linker, 4-(N-maleimi-domethyl) cyclohexane-1-carboxylic acid 3-sulfo-N-hydroxysuccinimide ester sodium salt (Sulfo-SMCC), to chemically conjugate BMP-2 directly on collagen discs. In the current study, retention efficiency and release kinetics of stromal cell-derived factor-1α (SDF-1α) cross-linked on collagen scaffolds were detected. In addition, the osteogenic activity of SDF-1α and suboptimal doses of BMP-2 cross-linked on collagen discs following subcutaneous implantation in rats were evaluated. Independent two-tailed t-tests and one-way analysis of variance were used for analysis. In the present study, the controlled release of SDF-1α chemically conjugated on collagen scaffolds was demonstrated. By optimizing the concentrations of Traut's reagent and the Sulfo-SMCC cross-linker, a significantly higher level of SDF-1α was covalently retained on the collagen scaffold, compared with that retained using a physical adsorption method. Mesenchymal stem cell homing indicated that the biological function of the SDF-1α cross-linked on the collagen scaffolds remained intact. In rats, co-treatment with SDF-1α and a suboptimal dose of BMP-2 cross-linked on collagen scaffolds using this chemically conjugated method induced higher levels of ectopic bone formation, compared with the physical adsorption method. No ectopic bone formation was observed following treatment with a suboptimal dose of BMP-2 alone. Therefore, the co-delivery of SDF-1α and a suboptimal dose of BMP-2 chemically conjugated on collagen scaffolds for the treatment of bone injuries reduced the level of BMP-2 required, reducing the risks of side effects.

Paclitaxel-induced epithelial damage and ectopic MMP-13 expression promotes neurotoxicity in zebrafish

Paclitaxel is a microtubule-stabilizing chemotherapeutic agent that is widely used in cancer treatment and in a number of curative and palliative regimens. Despite its beneficial effects on cancer, paclitaxel also damages healthy tissues, most prominently the peripheral sensory nervous system. The mechanisms leading to paclitaxel-induced peripheral neuropathy remain elusive, and therapies that prevent or alleviate this condition are not available. We established a zebrafish in vivo model to study the underlying mechanisms and to identify pharmacological agents that may be developed into therapeutics. Both adult and larval zebrafish displayed signs of paclitaxel neurotoxicity, including sensory axon degeneration and the loss of touch response in the distal caudal fin. Intriguingly, studies in zebrafish larvae showed that paclitaxel rapidly promotes epithelial damage and decreased mechanical stress resistance of the skin before induction of axon degeneration. Moreover, injured paclitaxel-treated zebrafish skin and scratch-wounded human keratinocytes (HEK001) display reduced healing capacity. Epithelial damage correlated with rapid accumulation of fluorescein-conjugated paclitaxel in epidermal basal keratinocytes, but not axons, and up-regulation of matrix-metalloproteinase 13 (MMP-13, collagenase 3) in the skin. Pharmacological inhibition of MMP-13, in contrast, largely rescued paclitaxel-induced epithelial damage and neurotoxicity, whereas MMP-13 overexpression in zebrafish embryos rendered the skin vulnerable to injury under mechanical stress conditions. Thus, our studies provide evidence that the epidermis plays a critical role in this condition, and we provide a previously unidentified candidate for therapeutic interventions.

Electrospun tilapia collagen nanofibers accelerating wound healing via inducing keratinocytes proliferation and differentiation

The development of biomaterials with the ability to induce skin wound healing is a great challenge in biomedicine. In this study, tilapia skin collagen sponge and electrospun nanofibers were developed for wound dressing. The collagen sponge was composed of at least two α-peptides. It did not change the number of spleen-derived lymphocytes in BALB/c mice, the ratio of CD4(+)/CD8(+) lymphocytes, and the level of IgG or IgM in Sprague-Dawley rats. The tensile strength and contact angle of collagen nanofibers were 6.72±0.44MPa and 26.71±4.88°, respectively. They also had good thermal stability and swelling property. Furthermore, the nanofibers could significantly promote the proliferation of human keratinocytes (HaCaTs) and stimulate epidermal differentiation through the up-regulated gene expression of involucrin, filaggrin, and type I transglutaminase in HaCaTs. The collagen nanofibers could also facilitate rat skin regeneration. In the present study, electrospun biomimetic tilapia skin collagen nanofibers were succesfully prepared, were proved to have good bioactivity and could accelerate rat wound healing rapidly and effectively. These biological effects might be attributed to the biomimic extracellular matrix structure and the multiple amino acids of the collagen nanofibers. Therefore, the cost-efficient tilapia collagen nanofibers could be used as novel wound dressing, meanwhile effectively avoiding the risk of transmitting animal disease in the future clinical apllication.

Production of Highly Aligned Collagen Scaffolds by Freeze-drying of Self-assembled, Fibrillar Collagen Gels

Matrix and cellular alignment are critical factors in the native function of many tissues, including muscle, nerve, and ligaments. Collagen is frequently a component of these aligned tissues, and collagen biomaterials are widely used in tissue engineering applications. However, the generation of aligned collagen scaffolds that maintain the native architecture of collagen fibrils has not been straightforward, with many methods requiring specialized equipment or technical procedures, extensive incubation times, or denaturing of the collagen. Herein, we present a simple, rapid method for fabrication of highly aligned collagen scaffolds. Collagen was assembled to form a fibrillar hydrogel in a cylindrical conduit with high aspect ratio and then frozen and lyophilized. The resulting collagen scaffolds demonstrated highly aligned topographical features along the scaffold surface. This presence of an initial fibrillar network and the high-aspect ratio vessel were both required to generate alignment. The diameter of fabricated scaffolds was found to vary significantly with both the collagen concentration of the hydrogel suspension and the diameter of conduits used for fabrication. Additionally, the size of individual aligned topographical features was significantly dependent on the conduit diameter and the freezing temperature. When cultured on aligned collagen scaffolds, both rat dermal fibroblasts and axons emerging from chick dorsal root ganglia explants demonstrated elongated, aligned morphology and growth on the aligned topographical features. Overall, this method presents a simple means for generating aligned collagen scaffolds that can be applied to a wide variety of tissue types, particularly those where such alignment is critical to native function.