Formation of Lignin Nanoparticles by Combining Organosolv Pretreatment of Birch Biomass and Homogenization Processes

Lignin derivatives-based hydrogels for biomedical applications

Recently, numerous studies have been conducted on renewable polymers derived from different natural sources, exploring their suitability for diverse biomedical applications. Lignin as one of the main components of lignocellulosic has garnered significant attention as a promising alternative to petroleum-based polymers. This interest is primarily due to its cost-effectiveness, biocompatibility, eco-friendly nature, as well as its antioxidant and antimicrobial properties. These characteristics could be more beneficial when incorporating lignin into the formulation of value-added products. Although lignin has a chemical structure that is suitable for various applications, these characteristics require modifications to guarantee that the resultant materials display the desired biological, chemical, and physical properties when applied in the creation of biodegradable hydrogels, particularly for biomedical purposes. This study delineates the recent modification approaches that have been employed in the creation of lignin-based hydrogels. These strategies encompass both chemical and physical interactions with other polymers. Additionally, this review encompasses an examination of the current applications of lignin hydrogels, spanning their use as scaffolds for tissue engineering, carriers for pharmaceuticals, materials for wound dressings and biosensors, and elements in flexible and wearable electronics. Finally, we delve into the challenges and constraints associated with these materials, discuss the necessary steps required to attain the appropriate properties for the development of innovative lignin-based hydrogels, and derive conclusions based on the presented findings.

The mechanism of self-assembly of lignin in deep eutectic solvent based on sulfamic acid and urea through molecular dynamics simulation

Due to the diversity of industrial lignin sources and the complexity of its structure, its application as a high-value material is limited. Lignin nanoparticles (LNPs) have emerged as a hotspot for research due to their advantages of high specific surface area and high dispersion and the solvent transfer method is commonly used for the preparation of LNPs. In this paper, LNPs were prepared by solvent transfer method using DES based on sulfamic acid and urea (S/U DES) as solvent and water as anti-solvent. To explore the internal mechanism of the self-assembly of nanoparticles, a theoretical model of the solvent system and model lignin compound was constructed with the assistance of quantum chemistry and molecular dynamics theories. Through classical molecular dynamics (MD) simulations, the interaction energy, radius of gyration (ROG), solvent accessible surface area (SASS), radial and spatial distribution function (RDFs/SDFs), hydrogen bonding, and the morphology changes were analyzed to reveal the internal mechanism of self-assembly of model lignin compounds in S/U DES. This study is useful in revealing the mechanism of interaction between lignin and DES, as well as providing a benchmark for the green and efficient preparation of lignin nanoparticles.

Lignocellulosic Bionanomaterials for Biosensor Applications

The rapid population growth, increasing global energy demand, climate change, and excessive use of fossil fuels have adversely affected environmental management and sustainability. Furthermore, the requirements for a safer ecology and environment have necessitated the use of renewable materials, thereby solving the problem of sustainability of resources. In this perspective, lignocellulosic biomass is an attractive natural resource because of its abundance, renewability, recyclability, and low cost. The ever-increasing developments in nanotechnology have opened up new vistas in sensor fabrication such as biosensor design for electronics, communication, automobile, optical products, packaging, textile, biomedical, and tissue engineering. Due to their outstanding properties such as biodegradability, biocompatibility, non-toxicity, improved electrical and thermal conductivity, high physical and mechanical properties, high surface area and catalytic activity, lignocellulosic bionanomaterials including nanocellulose and nanolignin emerge as very promising raw materials to be used in the development of high-impact biosensors. In this article, the use of lignocellulosic bionanomaterials in biosensor applications is reviewed and major challenges and opportunities are identified.

Improving the protective ability of lignin against vascular and neurological development in BPAF-induced zebrafish by high-pressure homogenization technology

The lack of a sufficient amount of functional groups in the lignin structure limits its bioapplication. In this work, high-pressure homogenization was performed on original kraft lignin (L-ORI) to prepare lignin nanoparticles (L-NANO), which aimed to improve its functional group contents for further vascular and neurological applications. The results showed that the prepared L-NANO possessed spherical structures with diameters of 40.3-160.4 nm and increased amount of hydroxyl groups. Compared to L-ORI, L-NANO possessed better in vivo and in vitro antioxidant capacity, which could endow it with enhanced protective effects for the vascular and neural development of bisphenol AF (BPAF)-induced zebrafish. In addition, L-NANO reduced the neurotoxicity and cardiovascular toxicity of BPAF in zebrafish by upregulating the expression levels of oxidative stress-related genes (Cu/Zn-Sod and cat), which could further significantly upregulate the expression levels of neurogenesis genes (elavl3, gap43, mbp, and syn2a) and protect the contraction of the cardinal vein (CCV) and early central nervous system development by upregulating the expression levels of vascular genes (flk1 and flt4). The excellent cardiovascular and neurodevelopmental protective ability of L-NANO indicated that high-pressure homogenization is a promising technology for improving the bioactivity of lignin.

Electrospray lignin nanoparticles as Pickering emulsions stabilizers with antioxidant activity, UV barrier properties and biological safety

The inherent complexity and large particle size of native-state lignin are the major factors limiting its performance in high value-added materials. To realize the high-value application of lignin, nanotechnology is a promising method. Therefore, we offer a nanomanufacturing approach to produce lignin nanoparticles with uniform size, regular shape and high yield using electrospray. They are efficient in stabilizing oil-in-water (O/W) Pickering emulsions that remain for one month. Lignin has the abilities to demonstrate broad-spectrum UV resistance and green antioxidant properties in advanced materials, taking advantage of its inherent chemical characteristics. In addition, lignin has high safety for topical products according to an in vitro cytotoxicity test. In addition, the nanoparticle concentrations used in the emulsion were as low as 0.1 mg/ml, which maintained UV-resistant ability and overcame traditional lignin-based materials with unfavorable dark colors. Overall, lignin nanoparticles not only act as stabilizers at the water-oil interface but also realize the high functionality of lignin.

Lignin recovery from cocoa bean shell using microwave-assisted extraction and deep eutectic solvents

Lignin is the second most abundant natural polymer after cellulose, and valorisation of lignin-rich streams has attracted increasing attention recently. This paper presents a novel and sustainable method to recover lignin from Cocoa Bean Shells (CBS) using Deep Eutectic Solvents (DES) and microwaves. A DES containing p-toluenesulfonic acid, choline chloride and glycerol (2:1:1 M ratio) was selected based on its dielectric properties. Under 200 W microwave power, the optimum yield of 95.5 % lignin was achieved at 130 °C and 30 min. DES-extracted lignin exhibited unique structural characteristics including larger particle sizes (242.5 µm D50 size), structural diversity (410.4 µm D90-D10 size) and H/G sub-unit ratio (71.9 %) compared with commercial Kraft lignin (77.2 µm, 157.9 µm and 0.1 % respectively), indicating the potential of DES in the modification and upgrading of lignin for novel value-added products.

Nanogrinding/ethanol activation facilitating lignin fractionation for preparation of monodispersed lignin nanoparticles

Lignin nanoparticles (LNPs), as one of green and sustainable biological macromolecules, have attracted great attention owing to their promising potentials in many valorized fields. However, the lignin heterogeneity seriously restricts the controllable preparation of LNPs. Herein, a facile nanogrinding activation combining anhydrous ethanol dissolution process was developed to efficiently homogenize lignin prior to gradient ethanol fractionation. Two lignin fractions were obtained from nanogrinding activation/ethanol dissolution followed by gradient ethanol fractionation: L-fractions and S-fractions. Therefore, monodispersed LNPs with unique concave hollow nanostructure and large particle size, and monodispersed LNPs with solid core nanostructure and small particle size were successfully prepared from L-fractions and S-fractions, respectively, via a GVL/water anti-solvent method. The proposed LNPs formation mechanisms facilitated by nanogrinding activation/ethanol dissolution treatment were demonstrated. This study put forwards a facile and green integrated approach for monodispersed LNPs preparation with controllable morphology and particle size.

A recent advancement on preparation, characterization and application of nanolignin

Each year, 50 to 70 million tonnes of lignin are produced worldwide as by-products from pulp industries and biorefineries through numerous processes. Nevertheless, about 98% of lignin is directly burnt to produce steam to generate energy for the pulp mills and only a handful of isolated lignin is used as a raw material for the chemical conversion and for the preparation of various substances as well as modification of lignin into nanomaterials. Thus, thanks to its complex structure, the conversion of lignin to nanolignin, attracting growing attention and generating considerable interest in the scientific community. The objective of this review is to provide a complete understanding and knowledge of the synthesis methods and functionalization of various lignin nanoparticles (LNP). The characterization of LNP such as structural, thermal, molecular weight properties together with macromolecule and quantification assessments are also reviewed. In particular, emerging applications in different areas such as UV barriers, antimicrobials, drug administration, agriculture, anticorrosives, the environment, wood protection, enzymatic immobilization and others were highlighted. In addition, future perspectives and challenges related to the development of LNP are discussed.

Simulation and optimization of organosolv based lignocellulosic biomass refinery: A review

Organosolv pretreatment can be considered as the core of the lignocellulosic biomass fractionation within the biorefinery concept. Organosolv facilitates the separation of the major fractions (cellulose, hemicelluloses, lignin), and their use as renewable feedstocks to produce bioenergy, biofuels, and added-value biomass derived chemicals. The efficient separation of these fractions affects the economic feasibility of the biorefinery complex. This review focuses on the simulation of the organosolv pretreatment and the optimization of (i) feedstock delignification, (ii) sugars production (mainly from hemicelluloses), (iii) enzymatic digestibility of the cellulose fraction and (iv) quality of lignin. Simulation is used for the technoeconomic optimization of the biorefinery complex. Simulation and optimization implement a holistic approach considering the efficient technological, economic, and environmental performance of the biorefinery operational units. Consequently, an optimized organosolv stage is the first step for a sustainable, economically viable biorefinery complex in the concept of industrial ecology and zero waste circular economy.

Bacterial cellulose/lignin nanoparticles composite films with retarded biodegradability

In practical applications, the full biodegradability of all-biomass-based bacterial cellulose (BC) composites enhances their environmentally friendliness but results in the poor durability especially at humid conditions. This work prepared BC/lignin nanoparticles (LNPs) composite films with retarded biodegradability, which could broaden their application area. Three LNPs were fabricated using technical lignins extracted by deep eutectic solvent (DES), ethanol organosolv, soda/anthraquinone from poplar. LNPs involvement during BC fermentation showed limited influence on its productivity but significantly retarded the biodegradation of composite films. The potential inhibition mechanism was physical barrier and non-productive binding of LNPs. The BC/Soda LNPs showed much higher retarded degradation property (~58 wt% degradation) compared to BC/Organosolv LNPs and BC/DES LNPs (~85 wt% and ~ 97 wt% degradation respectively) at high enzyme loadings of 5 mg g^-1 BCE. While at low enzyme loadings of 1 mg g^-1 BCE, all these three composite films showed comparable retarded degradation property of ~60 wt%.

Multifunctional lignin-based nanocomposites and nanohybrids

Significant progress in lignins valorization and development of high-performance sustainable materials have been achieved in recent years. Reports related to lignin utilization indicate excellent prospects considering green chemistry, chemical engineering, energy, materials and polymer science, physical chemistry, biochemistry, among others. To fully realize such potential, one of the most promising routes involves lignin uses in nanocomposites and nanohybrid assemblies, where synergistic interactions are highly beneficial. This review first discusses the interfacial assembly of lignins with polysaccharides, proteins and other biopolymers, for instance, in the synthesis of nanocomposites. To give a wide perspective, we consider the subject of hybridization with metal and metal oxide nanoparticles, as well as uses as precursor of carbon materials and the assembly with other biobased nanoparticles, for instance to form nanohybrids. We provide cues to understand the fundamental aspects related to lignins, their self-assembly and supramolecular organization, all of which are critical in nanocomposites and nanohybrids. We highlight the possibilities of lignin in the fields of flame retardancy, food packaging, plant protection, electroactive materials, energy storage and health sciences. The most recent outcomes are evaluated given the importance of lignin extraction, within established and emerging biorefineries. We consider the benefit of lignin compared to synthetic counterparts. Bridging the gap between fundamental and application-driven research, this account offers critical insights as far as the potential of lignin as one of the frontrunners in the uptake of bioeconomy concepts and its application in value-added products.

Green and Scalable Preparation of Colloidal Suspension of Lignin Nanoparticles and Its Application in Eco-friendly Sunscreen Formulations

Lignin nanoparticles (LNPs) are applied in several industrial applications. The nanoprecipitation of LNPs is fast and inexpensive but currently still limited to the use of hazardous organic solvents, making it difficult to apply them on a large scale. Here, we report a scalable nanoprecipitation procedure for the preparation of colloidal lignin nanoparticles (cLNPs) by the use of the green solvents dimethylisosorbide and isopropylidene glycerol. Irrespective of the experimental conditions, cLNPs showed higher UV absorbing properties and radical scavenging activity than parent LNPs and raw lignin. cLNPs were successively used in the preparation of eco-friendly sunscreen formulations (SPF 15, 30, and 50+, as evaluated by the COLIPA assay), which showed high UV-shielding activity even in the absence of synthetic boosters (microplastics) and physical filters (TiO2 and ZnO). Biological assays on human HaCaT keratinocytes and human skin equivalents demonstrated the absence of cytotoxicity and genotoxicity, associated with an optimal protection of the skin from UV-A damage.

High-performance nanostructured bio-based carbon electrodes for energy storage applications

Polyacrylonitrile (PAN)-based carbon precursor is a well-established and researched material for electrodes in energy storage applications due to its good physical properties and excellent electrochemical performance. However, in the fight of preserving the environment and pioneering renewable energy sources, environmentally sustainable carbon precursors with superior electrochemical performance are needed. Therefore, bio-based materials are excellent candidates to replace PAN as a carbon precursor. Depending on the design requirement (e.g. carbon morphology, doping level, specific surface area, pore size and volume, and electrochemical performance), the appropriate selection of carbon precursors can be made from a variety of biomass and biowaste materials. This review provides a summary and discussion on the preparation and characterization of the emerging and recent bio-based carbon precursors that can be used as electrodes in energy storage applications. The review is outlined based on the morphology of nanostructures and the precursor's type. Furthermore, the review discusses and summarizes the excellent electrochemical performance of these recent carbon precursors in storage energy applications. Finally, a summary and outlook are also given. All this together portrays the promising role of bio-based carbon electrodes in energy storage applications.

Properties and Characterization of Lignin Nanoparticles Functionalized in Macroalgae Biopolymer Films

The demand for bioplastic material for industrial applications is increasing. However, moisture absorption and low mechanical strength have limited the use of bioplastic in commercial-scale applications. Macroalgae is no exception to these challenges of bioplastics. In this study, Kappaphycus alvarezii macroalgae were reinforced with lignin nanoparticles. Lignin nanoparticles (LNPs) were used as a filler to reduce the brittleness and hydrophilic nature of macroalgae (matrix). Lignin nanofiller was produced using a green approach from black liquor of soda pulping waste and purified. The physical, mechanical, morphological, structural, thermal, and water barrier properties of LNPs with and without the purification process in macroalgae films were studied. The bioplastic films’ functional properties, such as physical, mechanical, thermal, and water barrier properties, were significantly improved by incorporating purified and unpurified LNPs. However, the purified LNPs have a greater reinforcement effect on the macroalgae than unpurified LNPs. In this study, bioplastic film with 5% purified LNPs presented the optimum enhancement on almost all the functional properties. The enhancement is attributed to high compatibility due to strong interfacial interaction between the nanofiller and matrix. The developed LNPs/macroalgae bioplastic films can provide additional benefits and solutions to various industrial applications, especially packaging material.

A Review of Lignocellulosic-Derived Nanoparticles for Drug Delivery Applications: Lignin Nanoparticles, Xylan Nanoparticles, and Cellulose Nanocrystals

Due to their biocompatibility, biodegradability, and non-toxicity, lignocellulosic-derived nanoparticles are very potential materials for drug carriers in drug delivery applications. There are three main lignocellulosic-derived nanoparticles discussed in this review. First, lignin nanoparticles (LNPs) are an amphiphilic nanoparticle which has versatile interactions toward hydrophilic or hydrophobic drugs. The synthesis methods of LNPs play an important role in this amphiphilic characteristic. Second, xylan nanoparticles (XNPs) are a hemicellulose-derived nanoparticle, where additional pretreatment is needed to obtain a high purity xylan before the synthesis of XNPs. This process is quite long and challenging, but XNPs have a lot of potential as a drug carrier due to their stronger interactions with various drugs. Third, cellulose nanocrystals (CNCs) are a widely exploited nanoparticle, especially in drug delivery applications. CNCs have low cytotoxicity, therefore they are suitable for use as a drug carrier. The research possibilities for these three nanoparticles are still wide and there is potential in drug delivery applications, especially for enhancing their characteristics with further surface modifications adjusted to the drugs.

Preparation and Characterization of Size-Controlled Lignin Nanoparticles with Deep Eutectic Solvents by Nanoprecipitation

Lignin nanomaterials have wide application prospects in the fields of cosmetics delivery, energy storage, and environmental governance. In this study, we developed a simple and sustainable synthesis approach to produce uniform lignin nanoparticles (LNPs) by dissolving industrial lignin in deep eutectic solvents (DESs) followed by a self-assembling process. LNPs with high yield could be obtained through nanoprecipitation. The LNPs were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). Distinct LNPs could be produced by changing the type of DES, lignin sources, pre-dropping lignin concentration, and the pH of the system. Their diameter is in the range of 20–200 nm and they show excellent dispersibility and superior long-term stability. The method of preparing LNPs from lignin–DES with water as an anti-solvent is simple, rapid, and environmentally friendly. The outcome aids to further the advancement of lignin-based nanotechnology.

Green synthesis of lignin nano- and micro-particles: Physicochemical characterization, bioactive properties and cytotoxicity assessment

Lignin particles (LPs) have gained prominence due to their biodegradability and bioactive properties. LP production at nano and micro scale produced from organosolv lignin and the understanding of size's effect on their properties is unexplored. This work aimed to produce and characterize lignin nanoparticles and microparticles using a green synthesis process, based on ethanol-solubilized lignin and water. Spherical shape LPs, with a mean size of 75 nm and 215 nm and with a low polydispersity were produced, as confirmed by transmission electron microscopy and dynamic light scattering. LPs thermal stability improved over raw lignin, and the chemical structure of lignin was not affected by the production method. The antimicrobial tests proved that LPs presented a bacteriostatic effect on Escherichiacoli and Salmonella enterica. Regarding the antioxidant potential, LPs had a good antioxidant activity that increased with the reaction time and LPs concentration. LPs also presented an antioxidant effect against intracellular ROS, reducing the intracellular ROS levels significantly. Furthermore, the LPs showed a low cytotoxic effect in Caco-2 cell line. These results showed that LPs at different scales (nano and micro) present biological properties and are safe to be used in different high value industrial sectors, such as biomedical, pharmaceutical and food.

Melt Stable Functionalized Organosolv and Kraft Lignin Thermoplastic

A shift towards an economically viable biomass biorefinery concept requires the use of all biomass fractions (cellulose, hemicellulose, and lignin) for the production of high added-value products. As lignin is often underutilized, the establishment of lignin valorization routes is highly important. In-house produced organosolv as well as commercial Kraft lignin were used in this study. The aim of the current work was to make a comparative study of thermoplastic biomaterials from two different types of lignins. Native lignins were alkylate with two different alkyl iodides to produce ether-functionalized lignins. Successful etherification was verified by FT-IR spectroscopy, changes in the molecular weight of lignin, as well as 13C and 1H Nuclear Magnetic Resonance (NMR). The thermal stability of etherified lignin samples was considerably improved with the T2% of organosolv to increase from 143 °C to up to 213 °C and of Kraft lignin from 133 °C to up to 168 °C, and glass transition temperature was observed. The present study shows that etherification of both organosolv and Kraft lignin with alkyl halides can produce lignin thermoplastic biomaterials with low glass transition temperature. The length of the alkyl chain affects thermal stability as well as other thermal properties.

Preparation and characterization of nanosized lignin from oil palm (Elaeis guineensis) biomass as a novel emulsifying agent

A study was carried out to determine the effectiveness of lignin, extracted from oil palm (Elaeis guineensis) biomass as water-in-oil (W/O) emulsifying agent. To achieve this goal, soda lignin (SL) was extracted via soda pulping process and a series of nanosized soda lignin (NSL) were prepared using homogenizer at three different speed i.e. 10,400 rpm (NSL 10), 11,400 rpm (NSL 11) and 12,400 rpm (NSL 12) for one hour. All prepared samples were characterized by FT-IR, UV-Vis spectroscopy, thermogravimetric analysis (TGA), zeta potential analyser, Transmission Electron Microscope (TEM) and Extreme High Resolution Field Emission Scanning Electron Microscope (XHR-FESEM). The result of FTIR showed that there is no prominent change occurred in spectra of all samples while a good stability was reflected by TGA curves. The percentage of creaming index and visual observations of all samples demonstrated that NSL 12 and dosage 2 g (out of 1 g, 1.5 g and 2 g) were found to be the best among all samples. Furthermore, the results of IFT indicate that NSL 12 was proven to be more stable than the commercial product. Therefore, NSL 12 is selected for toxicological studies and was found safe in both, in vitro and in vivo studies.

Effects of Ethanol Concentration on Organosolv Lignin Precipitation and Aggregation from Miscanthus x giganteus

This work assesses the behavior of organosolv lignin aggregates derived from Miscanthus x giganteus using different ethanol concentrations (10%, 25%, 50%, and 75% by volume). The percentage of lignin recovery was found to decrease from 75.8% to 71.4% and 25.1%, as the ethanol concentration was increased from 10% to 25% and 50%, respectively. Increasing the ethanol concentration further to 75% led to zero recovery. The purity of the precipitated lignin was consistently found to be ≥90%. Lignin derived from the dried supernatant obtained at 50% ethanol concentration resulted in high lignin purity (51.6%) in comparison with the other ethanol concentrations used. Fourier transform infrared spectroscopy analysis showed that the precipitated lignin and dried supernatant at 50% ethanol concentration possessed the highest peak intensity apportioned to wavenumber of lignin as compared to that of at 25% and 10% ethanol concentrations, and the results linked with the percentage of lignin purity. The results of particle size analysis for precipitated lignin demonstrated particle sizes of 306, 392, and 2050 nm for 10%, 25%, and 50% ethanol concentrations, respectively, and the remaining supernatant with average particle sizes of 1598, 1197, and 875 nm, respectively. These results were verified with the morphology of lignin macromolecules in scanning electron microscopy images. Results of the particle size distribution of lignin revealed that the overall size of lignin aggregates decreased with decreasing ethanol concentration. In summary, these findings suggest that ethanol concentration affected the behavior of lignin aggregates in water–ethanol solution.

Organosolv lignin hydrophobic micro- and nanoparticles as a low-carbon footprint biodegradable flotation collector in mineral flotation

Flotation is a key step during mineral separation. Xanthates are the most commonly used collectors for recovering Cu, Ni, and Zn from sulphide ores. However, xanthates are fossil-based and toxic for the environment. The aim of this study was to evaluate the use of lignin nanoparticles and microparticles as sustainable and environmentally friendly collectors. Lignin particles demonstrated good selectivity toward Cu (chalcopyrite), with total recoveries exceeding 80% and grades of up to 8.6% w/w from a Cu-Ni ore in rougher flotation tests. When floating Zn-Pb-Cu ore, lignin nanoparticles could reduce the use of xanthates by 50%. Moreover, they outperformed xanthates alone, achieving total recoveries of up to 91%, 85%, and 98% for Cu, Pb, and Zn, respectively. These results prove the potential of lignin as a flotation collector.

Recovery of High Purity Lignin and Digestible Cellulose from Oil Palm Empty Fruit Bunch Using Low Acid-Catalyzed Organosolv Pretreatment

The lignocellulosic residue from the palm oil industry, oil palm empty fruit bunch (OPEFB), represents a challenge to both producing industries and environment due to its disposal difficulties. Alternatively, OPEFB can be used for the production of valuable products if pretreatment methods, which overcome OPEFB recalcitrance and allow tailored valorization of all its carbohydrates and lignin, are developed. Specifically, high-value applications for lignin, to increase its contribution to the feasibility of lignocellulosic biorefineries, demand high-purity fractions. In this study, acid-catalyzed organosolv using ethanol as a solvent was used for the recovery of high-purity lignin and digestible cellulose. Factors including catalyst type and its concentration, temperature, retention time, and solid-to-liquid (S/L) ratio were found to influence lignin purity and recovery. At the best conditions (0.07% H2SO4, 210 °C, 90 min, and S/L ratio of 1:10), a lignin purity and recovery of 70.6 ± 4.9% and 64.94 ± 1.09%, respectively, were obtained in addition to the glucan-rich fraction. The glucan-rich fraction showed 94.06 ± 4.71% digestibility within 18 h at an enzyme loading of 30 filter paper units (FPU) /g glucan. Therefore, ethanol organosolv can be used for fractionating OPEFB into three high-quality fractions (glucan, lignin, and hemicellulosic compounds) for further tailored biorefining using low acid concentrations. Especially, the use of ethanol opens the possibility for integration of 1st and 2nd generation ethanol benefiting from the separation of high-purity lignin.

Biorefining Oat Husks into High-Quality Lignin and Enzymatically Digestible Cellulose with Acid-Catalyzed Ethanol Organosolv Pretreatment

Oat husks are low-value lignocellulosic residues of oat processing that carry an environmental impact. Their polymers (cellulose, hemicellulose, and lignin) can be converted into a wide variety of value-added products; however, efficient pretreatment methods are needed that allow their fine separation for further tailored valorization. This study pioneered the use of milling-free and low acid-catalyzed ethanol organosolv for the delignification of oat husks, allowing their conversion into three high-quality streams, namely, glucan-rich, lignin-rich, and hemicellulosic compound-rich streams. Temperature, retention time, and solid-to-liquid ratio were found to impact the delignification of oat husks when using a one-factor-at-a-time strategy. The ideal conditions that were found (210 °C, 90 min, and solid-to-liquid ratio of 1:2) culminated into glucan and lignin fractions containing 74.5% ± 11.4% glucan and 74.9% ± 7.6% lignin, respectively. These high-purity lignin fractions open the possibility for higher value applications by lignin, potentially impacting the feasibility of second generation biorefineries. The glucan fraction showed 90% digestibility after 48 h of hydrolysis with 10 filter paper units of enzyme cocktail per gram of glucan. Considering the absence of size reduction and high solid loading, together with the quality of the obtained streams, organosolv pretreatment could be a potential strategy for the valorization of oat lignocellulosic residues.

Improving the economy of lignocellulose-based biorefineries with organosolv pretreatment

Lignocellulose-based processes for production of value-added products still face bottlenecks to attain feasibility. The key might lie on the biorefining of all lignocellulose main polymers, that is, cellulose, hemicellulose and lignin. Lignin, considered an impediment in the access of cellulose and normally considered for energy recovery purposes, can give a higher contribution towards profitability of lignocellulosic biorefineries. Organosolv pretreatment allows selective fractionation of lignocellulose into separate cellulose-, hemicellulose- and lignin-rich streams. Ethanol organosolv and wood substrates dominated the research studies, while a wide range of substrates need definition on the most suitable organosolv pretreatment systems. Techno-economic and environmental analyses of organosolv-based processes as well as proper valorization strategies of the hemicellulose-rich fraction are still scarce. In view of dominance of ethanol organosolv with high delignification yields and high-purity of the recovered cellulose-rich fractions, close R & D collaboration with 1st generation ethanol plants might boost commercialization.

Rice Husk Hydrolytic Lignin Transformation in Carbonization Process

Lignin processing products have an extensive using range. Because products properties depend on lignin precursor quality it was interesting to study lignin isolated from rice husk being a large tonnage waste of rice production and its structural transformations during carbonization. Lignin isolated by the thermal hydrolysis method with H₂SO₄ 1 wt % solution and its carbonized products prepared under different carbonization conditions were characterized using elemental analysis, IR, TPD-MS, XRD, TEM, and EPR. It was shown lignin degradation takes place over the wide (220–520 °C) temperature range. Silica presenting in lignin affects the thermal destruction of this polymer. Due to the strong chemical bond with phenolic hydroxylic group it decreases an evaporation of volatile compounds and as a result increases the temperature range of the lignin degradation. Rice husk hydrolytic lignin transformations during carbonization occur with generation of free radicals. Their concentration is decreased after condensation of aromatic rings with carbon polycycles formation, i.e., the graphite-like structure. Quantity and X-ray diffraction characteristics of the graphite-like phase depend on carbonization conditions. Morphology of the lignin-based carbonized products is represented by carbon fibers, carbon and silica nanoparticles, and together with another structure characteristics provides prospective performance properties of lignin-based end products.

Lignin-first biomass fractionation using a hybrid organosolv - Steam explosion pretreatment technology improves the saccharification and fermentability of spruce biomass

For a transition to a sustainable society, fuels, chemicals, and materials should be produced from renewable resources. Lignocellulosic biomass constitutes an abundant and renewable feedstock; however, its successful application in a biorefinery requires efficient fractionation into its components; cellulose, hemicellulose and lignin. Here, we demonstrate that a newly established hybrid organosolv - steam explosion pretreatment can effectively fractionate spruce biomass to yield pretreated solids with high cellulose (72% w/w) and low lignin (delignification up to 79.4% w/w) content. The cellulose-rich pretreated solids present high saccharification yields (up to 61% w/w) making them ideal for subsequent bioconversion processes. Moreover, under high-gravity conditions (22% w/w) we obtained an ethanol titer of 61.7 g/L, the highest so far reported for spruce biomass. Finally, the obtained high-purity lignin is suitable for various advanced applications. In conclusion, hybrid organosolv pretreatment could offer a closed-loop biorefinery while simultaneously adding value to all biomass components.