Investigating strontium isotope linkage between biominerals (uroliths), drinking water and environmental matrices

This study presents the mineralogy and strontium isotope ratio (87Sr/86Sr) of 21 pathological biominerals (bladder and kidney stones) collected from patients admitted between 2018 and 2020 at the Department of Urology of the San Pio Hospital (Benevento, southern Italy). Urinary stones belong to the calcium oxalate, purine or calcium phosphate mineralogy types. Their corresponding 87Sr/86Sr range from 0.707607 for an uricite sample to 0.709970 for a weddellite one, and seem to be partly discriminated based on the mineralogy. The comparison with the isotope characteristics of 38 representative Italian bottled and tap drinking waters show a general overlap in 87Sr/86Sr with the biominerals. However, on a smaller geographic area (Campania Region), we observe small 87Sr/86Sr differences between the biominerals and local waters. This may be explained by external Sr inputs for example from agriculture practices, inhaled aerosols (i.e., particulate matter), animal manure and sewage, non-regional foods. Nevertheless, biominerals of patients that stated to drink and eat local water/wines and foods every day exhibited a narrower 87Sr/86Sr range roughly matching the typical isotope ratios of local geological materials and waters, as well as those of archaeological biominerals from the same area. Finally, we conclude that the strontium isotope signature of urinary stones may reflect that of the environmental matrices surrounding patients, but future investigations are recommended to ultimately establish the potential for pathological biominerals as reliable biomonitoring proxies, taking into the account the contribution of the external sources of Sr.

Measurements of neutrino oscillation parameters from the T2K experiment using 3.6×1021 protons on target

The T2K experiment presents new measurements of neutrino oscillation parameters using 19.7 ( 16.3 ) × 10 20 protons on target (POT) in (anti-)neutrino mode at the far detector (FD). Compared to the previous analysis, an additional 4.7 × 10 20 POT neutrino data was collected at the FD. Significant improvements were made to the analysis methodology, with the near-detector analysis introducing new selections and using more than double the data. Additionally, this is the first T2K oscillation analysis to use NA61/SHINE data on a replica of the T2K target to tune the neutrino flux model, and the neutrino interaction model was improved to include new nuclear effects and calculations. Frequentist and Bayesian analyses are presented, including results on sin 2 θ 13 and the impact of priors on the δ CP measurement. Both analyses prefer the normal mass ordering and upper octant of sin 2 θ 23 with a nearly maximally CP-violating phase. Assuming the normal ordering and using the constraint on sin 2 θ 13 from reactors, sin 2 θ 23 = 0 . 561 - 0.032 + 0.021 using Feldman-Cousins corrected intervals, and Δ m 32 2 = 2 . 494 - 0.058 + 0.041 × 10 - 3 eV 2 using constant Δ χ 2 intervals. The CP-violating phase is constrained to δ CP = - 1 . 97 - 0.70 + 0.97 using Feldman-Cousins corrected intervals, and δ CP = 0 , π is excluded at more than 90% confidence level. A Jarlskog invariant of zero is excluded at more than 2 σ credible level using a flat prior in δ CP , and just below 2 σ using a flat prior in sin δ CP . When the external constraint on sin 2 θ 13 is removed, sin 2 θ 13 = 28 . 0 - 6.5 + 2.8 × 10 - 3 , in agreement with measurements from reactor experiments. These results are consistent with previous T2K analyses.

3D-printed metals: Process parameters effects on mechanical properties of 17-4 P H stainless steel

Additive Manufacturing (AM) has spread significantly in recent years, with relevant applications in many fields of research and engineering. Thanks to its distinctive production methods, AM enables the creation of parts with complex shapes that cannot be fabricated easily by employing traditional subtractive processes. 3D printing, which involves overlapping material layer by layer until the designed part is completed, shows several advantages in terms of limiting material waste, reducing production phases and postprocessing/heat treatments needs, leading to an additional benefit in terms of environmental sustainability. However, there are still limited available data on the influence of the 3D printing process on the mechanical properties of the materials that are commonly used and additional investigations are strongly demanded. So, the purpose of the present paper is to provide a useful contribution in the field of metal additive manufacturing, reporting the results of an experimental campaign carried out on 17-4 P H stainless steel, produced using selective laser melting technology. The effects of different printing orientations and scanning times on the tensile behaviour, impact strength and microhardness features of the 3D-printed products are investigated. Furthermore, the influence of an annealing heat treatment on the material mechanical performance is evaluated.

May a comprehensive mineralogical study of a jackstone calculus and some other human bladder stones unveil health and environmental implications?

This paper represents the first result of an active collaboration between the University of Sannio and the San Pio Hospital (Benevento, Italy), started in the 2018, that aims to a detailed mineralogical investigation of urinary stones of patients from Campania region. Herein, selected human bladder stones have been deeply characterized for clinical purposes and environmental biomonitoring, focusing on the importance to evaluate the concentration and distribution of undesired trace elements by means of microscopic techniques in the place of conventional wet chemical analyses. A rare bladder stone with a sea-urchin appearance, known as jackstone calculus, were also investigated (along with bladder stones made of uric acid and brushite) by means a comprehensive analytical approach, including Synchrotron X-ray Diffraction and Simultaneous Thermal Analyses. Main clinical assumptions were inferred according to the morpho-constitutional classification of bladder stones and information about patient's medical history and lifestyle. In most of the analyzed uroliths, undesired trace elements such as copper, cadmium, lead, chromium, mercury and arsenic have been detected and generally attributable to environmental pollution or contaminated food. Simultaneous occurrence of selenium and mercury should denote a methylmercury detoxification process, probably leading to the formation of a very rare HgSe compound known as tiemannite.

Elasticity in Bubble Rupture

When a Newtonian bubble ruptures, the film retraction dynamics is controlled by the interplay of surface, inertial, and viscous forces. In case a viscoelastic liquid is considered, the scenario is enriched by the appearance of a new significant contribution, namely, the elastic force. In this paper, we investigate experimentally the retraction of viscoelastic bubbles inflated at different blowing rates, showing that the amount of elastic energy stored by the liquid film enclosing the bubble depends on the inflation history and in turn affects the velocity of film retraction when the bubble is punctured. Several viscoelastic liquids are considered. We also perform direct numerical simulations to support the experimental findings. Finally, we develop a simple heuristic model able to interpret the physical mechanism underlying the process.

Zeolitized tuffs in pedotechnique for the reclamation of abandoned quarries. A case study in the Campania region (Italy)

The present study aims to assess the evolution of different proto-horizons as embryonic soils built by pedotechnologies for the reclamation and management of derelict and damaged lands, such as abandoned quarries. The model proto-horizons were assembled by utilizing coarse limestone gravel or zeolitized Phlegraean Yellow Tuff (PYT) as mineral components and commercial compost-amendments or a phosphorite-poultry manure mixture as organic matrices for growth of a pasture-grass under controlled conditions. The evolution of the model proto-horizons was followed by an evaluation of the stability and modification of the organic matter (OM) with reference to plant development. The results suggest that the natural carbonatic substrate occurring in limestone quarries was unable to sustain significant plant growth, while the PYT was suitable and efficient as a pedogenic substrate because it supported plant growth and induced a conspicuous accumulation of OM due to root activity. In particular, OM, including humic and non-humic components, greatly increased in the PYT treatment with the phosphorite-poultry manure mixture showing a concurrent trend toward humification. Conversely, an overall tendency toward degradation of OM was detected in the PYT model proto-horizon treated with commercial compost. Feasibility estimates show that quarry restoration costs appear reasonable where environmental impacts are high.

[Angiotensin II stimulates endothelin-1 release from human endothelial cells]

Endothelin-1 (ET-1) is an endothelium-derived vasoconstrictor peptide isolated from the culture supernatant of porcine aortic endothelial cells. This 21 amino-acid residue peptide has potent vasoconstrictive properties in vitro and in vivo. ET-1 action involves phosphatidylinositol turnover, calcium mobilization and protein kinase C activation. Endothelial cells have distinct receptors for different operating through hydrosoluble hormones. The aim of this study was to investigate on a possible role of angiotensin II (ANG II) to modulate the release ET-1 from human endothelial cells in vitro. These data revealed a time- and a dose-dependent increase of ET-1 production in response to ANG II. This mechanism may have important pathophysiological implications in vivo. In fact, a double-mechanism of secretion of ET-1 from endothelial cells could exist: one active in a physiological condition and an other in response to a vasoconstrictor stimuli (as well as ANG II). Furthermore, these results may suggest an additional favourable effect of ACE-inhibition in human hypertension therapy.