Mind the gap in kidney care: translating what we know into what we do

Historically, it takes an average of 17 years to move new treatments from clinical evidence to daily practice. Given the highly effective treatments now available to prevent or delay kidney disease onset and progression, this is far too long. The time is now to narrow the gap between what we know and what we do. Clear guidelines exist for the prevention and management of common risk factors for kidney disease, such as hypertension and diabetes, but only a fraction of people with these conditions worldwide are diagnosed, and even fewer are treated to target. Similarly, the vast majority of people living with kidney disease are unaware of their condition, because in the early stages it is often silent. Even among patients who have been diagnosed, many do not receive appropriate treatment for kidney disease. Considering the serious consequences of kidney disease progression, kidney failure, or death, it is imperative that treatments are initiated early and appropriately. Opportunities to diagnose and treat kidney disease early must be maximized beginning at the primary care level. Many systematic barriers exist, ranging from patient to clinician to health systems to societal factors. To preserve and improve kidney health for everyone everywhere, each of these barriers must be acknowledged so that sustainable solutions are developed and implemented without further delay.

Dentinal tubule penetration following ultrasonic, sonic, and single-cone technique of a biosealer: An ex vivo study

Background

The endodontic space is complex, and using a single-cone obturation technique fails to ensure a complete filling.

Introduction

This study aimed to investigate the effect of ultrasonic activation, sonic activation, and single-cone technique of a biosealer on its dentinal tubular penetration.

Materials and Methods

In the experiment, single-root mandibular premolars were randomly assigned to three groups (n = 20): group A, ultrasonic activation; Group B, sonic activation; and Group C, single-cone technique. Penetration of the fluorescently labeled biosealer was investigated using a confocal laser scanning microscope.

Results

The data were statistically analyzed using Kruskal-Wallis and Mann-Whitney tests (P = 0.05). The highest penetration of biosealer was observed in Group A, followed by Group B (P < 0.05).

Conclusions

Dentinal tubule penetration of biosealer was significantly improved by ultrasonic and sonic activation techniques.

Mind the Gap in Kidney Care: Translating What We Know Into What We Do

Historically, it takes an average of 17 years to move new treatments from clinical evidence to daily practice. Given the highly effective treatments now available to prevent or delay kidney disease onset and progression, this is far too long. The time is now to narrow the gap between what we know and what we do. Clear guidelines exist for the prevention and management of common risk factors for kidney disease, such as hypertension and diabetes, but only a fraction of people with these conditions worldwide are diagnosed, and even fewer are treated to target. Similarly, the vast majority of people living with kidney disease are unaware of their condition, because in the early stages it is often silent. Even among patients who have been diagnosed, many do not receive appropriate treatment for kidney disease. Considering the serious consequences of kidney disease progression, kidney failure, or death, it is imperative that treatments are initiated early and appropriately. Opportunities to diagnose and treat kidney disease early must be maximized beginning at the primary care level. Many systematic barriers exist, ranging from patient to clinician to health systems to societal factors. To preserve and improve kidney health for everyone everywhere, each of these barriers must be acknowledged so that sustainable solutions are developed and implemented without further delay. DOI: 10.52547/ijkd.8216.

The incidence of dental fractures in the Italian population during the COVID-19 pandemic: An observational study

Background

The COVID-19 infection has become a pandemic after breaking out in China in the past months of 2019 and spreading rapidly worldwide. To counter this pandemic, several governments worldwide have taken several drastic measures to try to stop the spread of the virus, including a very strict lockdown that has caused a sudden and, in many cases, negative change in people's daily lives. In the literature, several studies have shown how the pandemic has significantly impaired many people's mental health, causing short- and long-term stress, anxiety, and sleep disturbances.

Introduction

This study aims to analyze the correlation between the stress caused by the COVID-19 pandemic and the parafunctions of the temporomandibular joint and masticatory muscles, which in turn, have led to an increase in the incidence of fractures and dental injuries. The ultimate goal is to understand the best choice the dentist must make in the preventive and therapeutic fields.

Materials and Methods

A questionnaire called "Incidence of tooth fractures during the COVID-19 pandemic" was prepared using the Google® Forms platform. This questionnaire consists of 13 questions. This electronic questionnaire was addressed to all dentists in the Campania Region (ITA) and disseminated through social networks such as WhatsApp® or Facebook® or E-mail.

Results

A total of 730 dentists completed the survey. Of these, 450 (61.7%) stated that the number of patients reporting muscle and joint pain in the morning had increased during the COVID-19 pandemic. 414 (56.7%) dentists noted an increase in parafunction and 392 (53.6%) an increase in dental fractures during the pandemic period.

Discussion and Conclusions

As can be seen from the study results, an important correlation was found between the stress resulting from the COVID-19 pandemic and dental fractures. The dental elements treated endodontically, depending on the extent of the damage, require restoration, which is also the best preventive strategy in the case of dental fractures.

RETRACTED: Iandolo et al. Traditional and Recent Root Canal Irrigation Methods and Their Effectiveness: A Review. Clin. Pract. 2023, 13, 1059-1072

The Clinics and Practice Editorial Office retracts the article titled "Traditional and Recent Root Canal Irrigation Methods and Their Effectiveness: A Review" [...].

Health Systems Preparedness for Infectious Disease Outbreaks: Relevance for Nephrology

The coronavirus disease (COVID-19) crisis glaringly highlighted the critical need to develop resilient health care systems that are better prepared for epidemics. Millions of people died from COVID-19 itself, but almost three times as many died from health system disruptions. People living with kidney disease are highly vulnerable during outbreaks and pandemics and their needs must be included in preparedness planning. Health systems preparedness requires not only early identification and containment of outbreaks and maintenance of critical services during crises, but also bolstering population resilience and ensuring the safety of both health personnel and patients. Planning for surge capacity in an outbreak must include provision for both acute and chronic dialysis, and ensure access to medications for people with kidney diseases. Quality of care should not be compromised and must be monitored and improved where necessary. Technology, such as telemedicine, can support quality and continuity of care and minimize infection risks. Communication at all levels is crucial to ensure all stakeholders, including communities, have the necessary information to support cooperation and collaboration in effective outbreak responses. Research is important during and after pandemics to improve knowledge and build resilience at all levels, from outbreak detection to the development of therapeutics and optimizing equity in access to interventions. Only with adequate preparation and more resilient health systems can we hope, as a global community, to build on the harsh lessons learned during COVID-19, and improve the response to the next infectious disease outbreak, epidemic, or even pandemic.

Traditional and Recent Root Canal Irrigation Methods and Their Effectiveness: A Review

According to contemporary dental standards, the primary goal of endodontic therapy is the chemo-mechanical cleaning of the complex root canal system. Watering root canals with approved solutions and activating them are essential parts of this operation. This review outlines various irrigant activation methods for root canal therapy. Specifically, a comparison among the methods of manual dynamic activation, sonics (subsonic, sonic, and ultrasonic), internal heating, and lasers, was conducted. The results in this work were gathered using Scopus, Web of Science, Google Scholar, and PubMed databases by searching the following keywords: sodium hypochlorite, cleaning, activation, and irrigation methods. The present work concluded that the use of irrigant activation has a greater benefit than its absence. Regardless, it is impossible to point to a single effective activation method.

Stronger than Ever: Multifilament Fiberglass Posts Boost Maxillary Premolar Fracture Resistance

This paper investigates the influence of cavity configuration and post-endodontic restoration on the fracture resistance, failure mode and stress distribution of premolars by using a method of fracture failure test and finite elements analysis (FEA) coupled to Weibull analysis (WA). One hundred premolars were divided into one control group (G_contr) (n = 10) and three experimental groups, according to the post-endodontic restoration (n = 30), G₁, restored using composite, G₂, restored using single fiber post and G₃, restored using multifilament fiberglass posts (m-FGP) without post-space preparation. Each experimental group was divided into three subgroups according to the type of coronal cavity configuration (n = 10): G_1O, G_2O, and G_3O with occlusal (O) cavity configuration; G_1MO, G_2MO, and G_3MO with mesio-occlusal (MO); and G_1MOD, G_2MOD, and G_3MOD with mesio-occluso-distal (MOD). After thermomechanical aging, all the specimens were tested under compression load, and failure mode was determined. FEA and WA supplemented destructive tests. Data were statistically analyzed. Irrespective of residual tooth substance, G₁ and G₂ exhibited lower fracture resistance than G_contr (p < 0.05), whereas G₃ showed no difference compared to G_contr (p > 0.05). Regarding the type of restoration, no difference was highlighted between G_1O and G_2O, G_1MO and G_2MO, or G_1MOD and G_2MOD (p > 0.05), whereas G_3O, G_3MO, and G_3MOD exhibit higher fracture resistance (p < 0.05) than G_1O and G_2O, G_1MO and G_2MO, and G_1MOD and G_2MOD, respectively. Regarding cavity configuration: in G₁ and G_2, G_1O and G_2O exhibited higher fracture resistance than G_1MOD and G_2MOD, respectively (p < 0.05). In G₃, there was no difference among G_3O, G_3MO and G_3MOD (p > 0.05). No difference was found among the different groups and subgroups regarding the failure mode. After aging, premolars restored with multifilament fiberglass posts demonstrated fracture resistance values comparable to those of an intact tooth, irrespective of the different type of cavity configuration.

Histological Evaluation of Root Canals by Performing a New Cleaning Protocol “RUA” in Endodontic Surgery

Aim: To enhance cleaning during retro-preparation in endodontic microsurgery. Materials and Methods: Forty mandibular premolars were instrumented, filled with a single cone technique, and then retro-preparation was performed and assigned to experiment A. In group A1, the cavity created by the retro preparation was cleansed with 2 mL of normal sterile saline. In group A2, the retro cavity was cleaned with 2 mL of sterile saline after the retro preparation. All the irrigation solutions mentioned above were delivered using an endodontic needle with a lateral vent and a gauge of 30. Subsequently, in group A2, 17% EDTA gel and 5.25% gel were inserted into the cavity and activated using ultrasonic tips. After the irrigation protocols, the specimens were decalcified for histological evaluation. Results: In the experiment, the amount of hard tissue debris was significantly greater in group A1 compared to group A2 (p < 0.05). Conclusions: The samples in group A2, where the new protocol was performed, showed statistically significant results.

Kidney health for all: preparedness for the unexpected in supporting the vulnerable

As the rate of natural disasters and other devastating events caused by human activities increases, the burden on the health and well-being of those affected by kidney disease has been immeasurable. Health system preparedness, which involves creating a resilient system that is able to deal with the health needs of the entire community during times of unexpected disruptions to usual care, has become globally important. In the wake of the COVID-19 pandemic, there is a heightened awareness of the amplification of negative effects on the renal community. Paradoxically, the complex medical needs of those who have kidney diseases are not met by systems handling crises, often compounded by an acute increase in burden via new patients as a result of the crisis itself. Disruptions in kidney care as a result of unexpected events are becoming more prevalent and likely to increase in the years to come. It is therefore only appropriate that the theme for this year's World Kidney Day will focus on Kidney Health for All: preparedness for the unexpected in supporting the vulnerable.

Smear Layer and Debris Removal from Root Canals Comparing Traditional Syringe Irrigation and 3D Cleaning: An Ex Vivo Study

Background: Endodontic treatment objectives comprise eliminating or decreasing bacterial load inside the complex endodontic space. Removing the smear layer and debris becomes mandatory to achieve good three-dimensional (3D) cleaning. Aim: This study assesses the difference in smear layer removal using the 3D cleaning technique and traditional syringe needle irrigation. The 3D cleaning technique includes the ultrasonic activation of intracanal-heated NaOCl. Materials and Methods: Our current study used single-rooted human mandibular premolar teeth to test the earlier-mentioned technique (n = 30). Initially, an endodontic access cavity was performed. Consequently, specimens were randomly distributed into three study groups according to irrigation protocol. The groups were Group 1, where the traditional syringe needle irrigation system was applied; Group 2, where the 3D cleaning technique was performed; and Group 3, in which teeth remained uncleaned as it was regarded as the control group. Once the experiment was completed, the teeth were decoronated at the cementoenamel junction (CEJ) and examined using scanning electron microscopy (SEM). Debris and smear layers were viewed in 1000× magnification and scored. Results: Statistical analysis was performed with a standard statistical software package (SPSS, version 28.0; SPSS IBM, Armonk, NY, USA). Data were analyzed with a nonparametric analysis of variance (Kruskal−Wallis ANOVA) among the groups tested and among the thirds of the canals. The level of significance was set at p < 0.05. A statistically significant (p < 0.05) lower mean smear layer and debris score was observed in both study groups compared to the control group. Group 2 showed better results compared to Group 1. Conclusions: The present study concluded that the 3D cleaning technique is an effective irrigation method for removing debris and smear layers. Future research, such as CLSM (Confocal Laser Scanning Microscopy) and Histological study, should be employed to confirm this study’s conclusion.

Root Canal Cleaning after Different Irrigation Techniques: An Ex Vivo Analysis

Background and Objectives: The endodontic space is a complex area on both micro and macro levels; therefore, traditional irrigation techniques may not guarantee a complete cleaning of such a complicated tridimensional system. The presented ex vivo study aimed to evaluate root canal cleanliness, obtained through an equal volume of traditionally applied sodium hypochlorite (NaOCl), compared to ultrasonically activated NaOCl and ultrasonically activated NaOCl that had undergone intracanal heating NaOCl. Materials and Methods: A total of 60 freshly extracted human mandibular premolars underwent root sample length standardization (18 mm), root canal preparation and, based on the irrigation method employed, were randomly and equally assigned to three study groups, composed of root samples treated with ultrasonically activated NaOCl, ultrasonically activated NaOCl that had undergone intracanal heating and traditionally applied NaOCl. The root specimens were subsequently fixated with 4% buffered formalin solution and decalcified in Morse liquid. A total often 6-micron-thick serial cross-sections were obtained, dyed using hematoxylin and eosin and examined through an optical microscope at 40×, 100×, and 200×. Results: Ultrasonically activated NaOCl that had undergone intracanal heating showed a significantly smaller amount of debris compared to ultrasonically activated and traditionally applied NaOCl groups (p value < 0.05). Conclusions: Root canal cleanliness saw significant enhancements by ultrasonically activated NaOCl that had undergone intracanal heating.

Modern rotary files in minimally invasive endodontics: a case report

Modern Endodontics aims to remove or decrease the bacterial load within the endodontic space. This target is achieved by performing adequate mechanical preparation combined with three-dimensional cleaning. The first step, shaping, is done using manual stainless steel files and Ni-Ti rotating files. In recent years, new rotating files have been developed in the martensitic phase, which, being more flexible, guarantees to work safely in the case of difficult anatomies. Therefore, this study aimed to demonstrate a non-surgical endodontic treatment using modern Ni-Ti files in a minimally invasive approach.

Confocal laser scanning microscopy evaluation of roots subjected to activation protocol in endodontic microsurgery

This study evaluated the penetration of the irrigant subject to activation after performing retro-preparation in endodontic microsurgery. Forty mandibular premolars were prepared and filled. Subsequently, 1 mm from the root apex was cut using a multi-blade bur and the retro-preparation was performed. In group 1, the retro-cavity was cleaned with 2 mL of saline and then with 2 mL of 5.25% NaOCl gel mixed with 0.1% Rhodamine B. In group 2, the retro-cavity was cleaned with 2 mL of saline, 17% EDTA gel was activated ultrasonically for 30 s and 5.25% NaOCl gel was mixed with 0.1% Rhodamine B and activated for 30 s. After 7 days, the roots were cut at 1mm from the apex and the slices were evaluated with confocal laser scanning microscopy. The samples of group 2 showed statistically better results. The activation protocol proposed resulted in enhanced irrigant penetration when compared to the traditional.

An innovative technique to safely perform active cleaning in teeth with open apices: CAB technique

The current study aims to evaluate in vitro the extrusion of NaOCl, using an artificial root canal with an open apex, using different canal irrigation protocols. For this study, a transparent artificial root canal was used. The apex was shaped to be oversized and irregular in form. After root canal mechanical shaping, the artificial cylindrical chamber, which was made below the large apical foramen, was filled with fuchsine-stained bovine pulp tissue. Afterward, irrigation protocols were carried out and compared regarding their safety with regards to irrigant extrusion. Subsequently, the examiner created two groups, Group A: internal heating associated with ultrasonic activation and Group B: internal heating associated with ultrasonic activation, using the CAB technique. In both the groups, 5.25% sodium hypochlorite solution was used as the irrigant. Regarding assessing the presence or absence of the extrusion, photographs at ×20 were taken and analyzed. For the statistical analysis, a t-test for paired samples was used. Extrusion of irrigant beyond the apex was present only in Group A. The main objective of endodontic treatment is the removal of damaged tissues and bacteria. For this reason, active cleaning is crucial in all endodontic treatment cases. Internal heating followed with ultrasonic activation while using the CAB technique was an effective and safe technique to ensure no irrigant extrusion beyond the open apex.

Conservative shaping combined with three-dimensional cleaning can be a powerful tool: Case series

Conservative endodontics has been introduced about a decade ago. Since then, it has been demonstrated that less canal preparations lead to more dentin preservation resulted in decreased stress on tooth structure, mainly in the coronal third of the root, and potentially a higher resistance to fracture. In addition, smaller and larger canal preparations were comparable with regard to the cleanliness of the root canal. The purpose of this case series was to report on the outcome of root canal treatments following a conservative canal preparation, followed by three-dimensional cleaning technique (intracanal heating and ultrasonic activation of NaOCl).

Effect of different final irrigation protocols on pulp tissue dissolution from an isthmus model

This study assessed the pulp tissue dissolution from isthmus of a two-rooted maxillary premolar using different final irrigation protocols. After root canal preparation, the surface of the tooth was reduced to an extent that the isthmus could be observed, and 1 mg of pulp tissue was introduced into the isthmus which was covered with a glass slide. Following six groups were tested: syringe and needle; subsonic activation; sonic activation; ultrasonic activation; heating followed by sonic activation; and heating followed by ultrasonic activation. Before and after each experiment a photograph of the isthmus was taken at 30× to register the area of the pulp tissue. Statistical analysis was performed with Kruskal-Wallis and Mann-Whitney tests (P < 0.05). Syringe and needle group showed the lower value of pulp tissue dissolution followed by subsonic irrigation procedures. Pulp tissue dissolution was significantly higher when heating was followed by sonic or ultrasonic activation.

A novel modified obturation technique using biosealers: An ex vivo study

Background:

The root canal anatomy is a complex space, and using a single-cone obturation technique does not guarantee a complete filling.

Aim:

This research aimed to evaluate the actual temperature of the biosealer during the obturation phase inside the root canal using a new hot technique. In addition, this study evaluated the penetration depth of the biosealer inside dentinal tubules.

Setting and Design:

The current study was concluded on two ex vivo experiments; the former tested the temperature evaluation. The latter examined the penetration depth of the biosealer.

Materials and Methods:

In this study, 42 sec mandibular premolars were used, and two experiments were carried out. In the first experiment, two premolars were utilized, and two thermocouples of K-type for each tooth were used. During the second experiment, the penetration depth of the biosealer was examined, 40 teeth were selected. Root canals were prepared then divided into two obturation groups: A, gutta-percha, and biosealer with single-cone technique and B, gutta-percha, and biosealer with a newly proposed obturation method. Confocal laser scanning was used to assess the penetration of the sealer.

Statistical Analysis Used:

In the first experiment, the Bonferroni method was performed to compare the temperature data. The tests used in the second experiment were Shapiro–Wilk's test, Kruskal–Wallis, and Mann–Whitney tests.

Results:

The first experiment results showed that the heat does not reach the apical third using the new obturation method. In the second experiment, the results showed in Group B significantly higher biosealer penetration into the dentinal tubules as compared to Group A (P < 0.05).

Conclusions:

The highest level of penetration of the biosealer in the dentinal tubules was observed in the group of the new obturation method, and the last apical 3 mm remained at 37° using this novel hot modified technique providing no risk of chemical alteration of the biosealer.

Evaluation of the actual chlorine concentration and the required time for pulp dissolution using different sodium hypochlorite irrigating solutions

Introduction:

The goal of root canal treatment is to shape and clean the endodontic space, reducing the bacterial load and removing the pulp tissue. Obviously, the action of the endodontic instruments is limited to the main canals, regardless of the complexity of the endodontic space. Consequently, finding the best possible cleaning technique, which can be obtained chemically using irrigation solutions, is a fundamental aid in endodontic therapy. One of the most commonly used root canal irrigants is sodium hypochlorite (NaOCl), available in various commercial formulations. The effectiveness of NaOCl is undeniable. However, the action of dissolution of the pulp tissue is merely dependent on the concentration and the characteristics of the irrigant itself.

Aim:

The aim of this study is to evaluate the effective concentration of different commercial formulas of NaOCl, by evaluating the percentage of total chlorine in each product. The dissolution capacity of the pulp tissue of each of the tested products was then analyzed by measuring the required time.

Materials and Methods:

Three commercial types of NaOCl were selected for this study: 5% NaOCl (ACE, Procter and Gamble), 5% NaOCl (N5, Simit Dental), and 6% NaOCl (CanalPro, Coltene). For each product, 10 packages were used, from which samples of the product were taken and 30 ml × 5 ml tubes were filled. All samples were divided into three groups and were analyzed using the DIN EN ISO 7393-2 method and the percentage of total chlorine (expressed as a percentage) was calculated. Forty samples of vital pulp were obtained from teeth freshly extracted for periodontal reasons and stored in physiological solution. In order to unify the size and weight of the samples (0.0001 mg), a microtome and a precision balance (Pro Explorer Ohaus) were used. Each sample, carefully examined by stereomicroscope (×40), was placed in artificial plastic containers and submerged in 0.1 ml of irrigating solution at room temperature (26°C). A fourth control group used saline solution as irrigant. Simultaneously with the insertion of the irrigating solution, a digital stopwatch was activated and the time necessary for the complete dissolution of the pulp sample was measured. The data obtained was subjected to statistical analysis.

Results:

The average percentages of chlorine detected for each group were: 4.26% (ACE), 5.16% (N5), and 5.97% (CanalPro). The Kruskal–Wallis test showed statistically significant differences between the different commercial formulations of hypochlorite (P < 0.05). CanalPro showed the lowest values, whereas ACE showed the highest values of dissolution time of the pulp.

Discussion:

The analysis of the total chlorine percentage found that the actual concentration of the NaOCl in the samples is close to the values declared by the manufacturers both in the case of N5 and CanalPro. On the contrary, the concentration detected in the samples of common bench bleach (ACE) is significantly lower, which has average values <5%. This explains the longer time taken for the complete dissolution of the pulp tissue. The average dissolution time of the pulp samples was in fact inversely proportional to the concentration detected in the tested irrigants and hence that a lower time corresponds to a higher concentration.

Intracanal heating of sodium hypochlorite: Scanning electron microscope evaluation of root canal walls

Introduction:

The aim of this study is to evaluate the surface of root canals dentine using scanning electron microscope (SEM) after instrumentation with rotary Nickel-Titanium systems and two different protocols of activation of sodium hypochlorite (NaOCl) (extracanal heating at 50°C and intracanal heating at 180°C), to assess the presence/absence of smear layer and also the presence/absence of open dentinal tubules along the walls at the coronal, middle, and apical third of each sample.

Materials and Methods:

Thirty-six single-rooted teeth were selected, divided into three groups and shaped with ProTaper Universal instruments following irrigation protocols with 5.25% NaOCl. At the end of the preparation, three different protocols of activation were used: nonheated NaOCl in Group A, extra-canal heated NaOCl at 50°C for Group B and intracanal heated NaOCl at 180°C for Group C. Specimens were cut longitudinally and analyzed by SEM at standard magnification of ×1000. The presence/absence of the smear layer as well as the presence/absence of open tubules at the coronal, middle, and apical third of each canal were estimated using a five-step scale for scores. Numeric data were analyzed using Kruskal–Wallis and Mann–Whitney U statistical tests and significance was predetermined at P < 0.05.

Results:

Kruskal–Wallis analysis of variance (ANOVA) for debris score showed significant differences among the Ni-Ti systems (P < 0.05). Mann–Whitney test confirmed that Group A presented significantly higher score values than other Ni-Ti systems. The same results were assessed considering the smear layer scores. ANOVA confirmed that the apical third of the canal maintained a higher quantity of debris and smear layer after preparation of all the samples.

Discussion and Conclusions:

Intra-canal heating of NaOCl at 180°C proved to be more effective in obtaining clean canal walls. On the other hand, extra-canal heating at 50°C of NaOCl left a higher quantity of debris and the smear layer was widely represented.

Evaluation of cyclic fatigue resistance of modern Nickel-Titanium rotary instruments with continuous rotation

Aim: The aim of present study was to compare cyclic fatigue resistance of three modern Ni-Ti instruments used with continuous rotation. Materials and methods: For this study 3 groups of rotating instruments with continuous rotation (HyFlex EDM, Twisted File Adaptive, Revo S SU) have been used, each group consisted of 20 files. The various groups were subjected to cyclic fatigue testing through an artificial metal device. A statistical analysis with Kruskal-Wallis test and Mann-Whitney test was performed. Results: There were statistically significant differences between the three groups. The HyFlex EDM instruments have a fracture resistance slightly higher than the Twisted file and far higher than Revo S SU. Conclusions: Modern Ni-Ti alloys increase resistance of the rotating instruments to cyclic fatigue.