Nucleoside-Derived Low-Molecular-Weight Gelators as a Synthetic Microenvironment for 3D Cell Culture

For the last few decades, many efforts have been made in developing cell culture methods in order to overcome the biological limitations of the conventional two-dimensional culture. This paradigm shift is driven by a large amount of new hydrogel-based systems for three-dimensional culture, among other systems, since they are known to mimic some living tissue properties. One class of hydrogel precursors has received interest in the field of biomaterials, low-molecular-weight gelators (LMWGs). In comparison to polymer gels, LMWG gels are formed by weak interactions upon an external trigger between the molecular subunits, giving them the ability to reverse the gelation, thus showing potential for many applications of practical interest. This study presents the use of the nucleoside derivative subclass of LMWGs, which are glyco-nucleo-bola-amphiphiles, as a proof of concept of a 3D cell culture scaffold. Physicochemical characterization was performed in order to reach the optimal features to fulfill the requirements of the cell culture microenvironment, in terms of the mechanical properties, architecture, molecular diffusion, porosity, and experimental practicality. The retained conditions were tested by culturing glioblastoma cells for over a month. The cell viability, proliferation, and spatial organization showed during the experiments demonstrate the proof of concept of nucleoside-derived LMWGs as a soft 3D cell culture scaffold. One of the hydrogels tested permits cell proliferation and spheroidal organization over the entire culture time. These systems offer many advantages as they consume very few matters within the optimal range of viscoelasticity for cell culture, and the thermoreversibility of these hydrogels permits their use with few instruments. The LMWG-based scaffold for the 3D cell culture presented in this study unlocked the ability to grow spheroids from patient cells to reach personalized therapies by dramatically reducing the variability of the lattice used.

Characterization of Glioblastoma Cancer Stem Cells Sorted by Sedimentation Field-Flow Fractionation Using an Ultrahigh-Frequency Range Dielectrophoresis Biosensor

Cancer stem cells (CSCs) appear to be an essential target for cancer therapies, in particular, in brain tumors such as Glioblastoma. Nevertheless, their isolation is made difficult by their low content in culture or tumors (<5% of the tumor mass) and is essentially based on the use of fluorescent or magnetic labeling techniques, increasing the risk of differentiation induction. The use of label-free separation methods such as sedimentation field-flow fractionation (SdFFF) is promising, but it becomes necessary to consider a coupling with a detection and characterization method for future identification and purification of CSCs from patient-derived tumors. In this study, we demonstrate for the first time the capability of using an ultrahigh-frequency range dielectrophoresis fluidic biosensor as a detector. This implies an important methodological adaptation of SdFFF cell sorting by the use of a new compatible carrier liquid DEP buffer (DEP-B). After SdFFF sorting, subpopulations derived from U87-MG and LN18 cell lines undergo biological characterization, demonstrating that using DEP-B as a carrier liquid, we sorted by SdFFF subpopulations with specific differentiation characteristics: F1 = differentiated cells/F2 = CSCs. These subpopulations presented high-frequency crossover (HFC) values similar to those measured for standard differentiated (around 110 MHz) and CSC (around 80 MHz) populations. This coupling appeared as a promising solution for the development of an online integration of these two complementary label-free separation/detection technologies.

Field-flow fractionation for nanoparticle characterization

This review presents field-flow fractionation: The elements of theory enable the link between the retention and the characteristics of the nanometer-sized analytes to be highlighted. In particular, the nature of force and its way of being applied are discussed. Four types of forces which determine four types of techniques were considered: hydrodynamic, sedimentation, thermal, and electrical; this is to show the importance of the choice of technique in relation to the characterization objectives. Then the separation performance is presented and compared with other separation techniques: field-flow fractionation has the greatest intrinsic separation capability. The characterization strategies are presented and discussed; on the one hand with respect to the characteristics needed for the description of nanoparticles; on the other hand in connection with the choice of the nature of the force, and also of the detectors used, online or offline. The discussion is based on a selection of published study examples. Finally, current needs and challenges are addressed, and as response, trends and possible characterization solutions.

Characterization of volcanic ash nanoparticles and study of their fate in aqueous medium by asymmetric flow field-flow fractionation-multi-detection

Dimensional and elemental characterization of environmental nanoparticles is a challenging task that requires the use of a set of complementary analytical methods. Asymmetric flow field-flow fractionation coupled with UV-Vis, multi-angle laser light scattering and ICP-MS detection was applied to study the nanoparticle fraction of a volcanic ash sample, in a Milli-Q water suspension at pH 6.8. It has been shown that the separated by sedimentation nanoparticle fraction of the Klyuchevskoy volcano ash suspension contains 3 polydisperse populations for which size ranges (expressed in gyration radius, rG), hydrodynamic behaviours (evaluated via shape index) and elemental compositions are different. These 3 populations did not dissolve over the 72-h study but aggregated and settled out differently. Thus, the population of particles with gyration radii <140 nm (P1), which contained 6% Al₂O₃ and represented approximately 20% by mass of the nanoparticle fraction, remained in suspension without observable aggregation. The populations P2 and P3, which represented 67% and 13% by mass in the initial suspension, covered the rG range 25-250 nm and contained 17% and 15% Al₂O₃, respectively. Over time, populations P2 and P3 aggregated and their concentration in suspension at 72 h decreased by approximately 40% compared with the initial suspension. The decrease of these nanoparticle populations occurred either from the beginning of the temporal monitoring (P2) or after 30 h (P3). Aggregation generated a new population (P4) in suspension with rG up to 300 nm and mostly consisting of P2. This population represented only up to 6 to 7% of the nanoparticle fraction and decreased beyond 50 h. As a result, the trace elements present in the nanoparticle fraction and monitored (Cu and La) were also no longer found in the suspension. The results obtained can offer additional insights into the fate of volcanic ash nanoparticles in the environment.

Platinum group elements contamination in soils: Review of the current state

Platinum group elements (PGE: Ru, Rh, Pd, Os Ir, Pt) are rare metals with low abundance in the continental crust. The elements of the palladium subgroup of PGE (PPGE: Pt, Pd, Rh) have been exploited more and more over the last thirty years for their physicochemical properties such as high melting point, high resistance to corrosion, mechanical strength and ductility. This led to emerging environmental contamination in different media such as air, road dust, soil, sediment, vegetation, and snow. The aim of this review is to summarize the available data on soil contamination by PPGE and its potential environmental impact. In this paper, the environmental issue of PPGE is discussed with regard to their anthropogenic emission and fate, which includes speciation, possible transformations into bioavailable forms and toxicity. Soil contamination by PPGE is described taking into account urban and non-urban areas. The analytical determination process is also discussed.

Biomaterials for Three-Dimensional Cell Culture: From Applications in Oncology to Nanotechnology

Three-dimensional cell culture has revolutionized cellular biology research and opened the door to novel discoveries in terms of cellular behavior and response to microenvironment stimuli. Different types of 3D culture exist today, including hydrogel scaffold-based models, which possess a complex structure mimicking the extracellular matrix. These hydrogels can be made of polymers (natural or synthetic) or low-molecular weight gelators that, via the supramolecular assembly of molecules, allow the production of a reproducible hydrogel with tunable mechanical properties. When cancer cells are grown in this type of hydrogel, they develop into multicellular tumor spheroids (MCTS). Three-dimensional (3D) cancer culture combined with a complex microenvironment that consists of a platform to study tumor development and also to assess the toxicity of physico-chemical entities such as ions, molecules or particles. With the emergence of nanoparticles of different origins and natures, implementing a reproducible in vitro model that consists of a bio-indicator for nano-toxicity assays is inevitable. However, the maneuver process of such a bio-indicator requires the implementation of a repeatable system that undergoes an exhaustive follow-up. Hence, the biggest challenge in this matter is the reproducibility of the MCTS and the associated full-scale characterization of this system's components.

Self-Assembly of Nucleoside-Derived Low-Molecular-Weight Gelators: A Thermodynamics and Kinetics Study on Different Length Scales

Biocompatible materials are of paramount importance in numerous fields. Unlike chemically bridge polymer-based hydrogels, low-molecular-weight gelators can form a reversible hydrogel as their structures rely on noncovalent interaction. Although many applications with this type of hydrogel can be envisioned, we still lack their understanding due to the complexity of their self-assembly process and the difficulty in predicting their behaviors (transition temperature, gelation kinetics, the impact of solvent, etc.). In this study, we extend the investigations of a series of nucleoside-derived gelators, which only differ by subtle chemical modifications. Using a multitechnique approach, we determined their thermodynamic and kinetic features on various scale (molecular to macro) in different conditions. Monitored at the supramolecular level by circular dichroism as well as macroscopic scales by rheology and turbidimetry, we found out that the sol-gel and gel-sol transitions are greatly dependent on the concentration and on the mechanisms that are probed. Self-assembly kinetics depends on hydrogel molecules and is modulated by temperature and solvent. This fundamental study provides insight on the impact of some parameters on the gelation process, such as concentration, cooling rate, and the nature of the solvent.

Mobility and transformation of CdSe/ZnS quantum dots in soil: Role of the capping ligands and ageing effect

The increasing application of Quantum Dots (QDs) is cause of concern for the potential negative effects for the ecosystem, especially in soils that may act as a sink. In this study, soil leaching experiments were performed in quartz sand packed columns to investigate the behavior of core-shell CdSe/ZnS QDs coated with either small ligands (TGA-QDs) or more complex polymers (POAMA-QDs). Fluorescence emission was compared to mass spectrometric measurements to assess the nanoparticles (NPs) state in both the leachate (transported species) and porous media (deposited amounts). Although both QDs were strongly retained in the column, large differences were observed depending on their capping ligand stability. Specifically, for TGA-QDs elution was negligible and the retained fraction accumulated in the top-columns. Furthermore, 74% of the NPs were degraded and 38% of the Se was found in the leachate in non-NPs state. Conversely, POAMA-QDs were recovered to a larger extent (78.1%), and displayed a higher transport along the soil profile. Further experiments with altered NPs showed that homo-aggregation of the QDs prior injection determined a reduced mobility but no significant changes in their stability. Eventually, ageing of the NPs in the column (15 days) caused the disruption of up to 92% of the original QDs and the immobilization of NPs and metals. These results indicate that QDs will accumulate in top-soils, where transformations phenomena will determine the overall transport, persistency and degradation of these chemicals. Once accumulated, they may act as a source for potentially toxic Cd and Se metal species displaying enhanced mobility.

Separation of nanoparticles from polydisperse environmental samples: comparative study of filtration, sedimentation, and coiled tube field-flow fractionation

Nanoparticles (NPs) in the environment have a potential risk for human health and the ecosystem due to their ubiquity, specific characteristics, and properties (extreme mobility in the environment, abilities to accumulate of toxic elements and penetrate into living organisms). There is still a gap in studies on the chemical composition of natural NPs. The main reason is the difficulty to recover NPs, which may represent only one-thousandth or less of the bulk environmental sample, for further dimensional and quantitative characterization. In the present study, a methodology for the recovery of the nanoparticle fraction from polydisperse environmental samples was developed taking as example volcanic ashes from different regions of the world. For the first time, three separation methods, namely, filtration through a 0.45-μm membrane, sedimentation, and coiled tube field-flow fractionation (CTFFF), were comparatively studied. The separated fractions were characterized by laser diffraction and scanning electron microscopy and then analyzed by inductively coupled plasma atomic emission and mass spectrometry. It has been shown that all three methods provide the separation of NPs less than 400 nm from the bulk material. However, the fraction separated by sedimentation also contained a population (5% in mass) of submicron particles (~ 400-900 nm). The filtration resulted in low recovery of NPs. The determination of most trace elements was then impossible; the concentration of elements was under the limit of detection of the analytical instrument. The sedimentation and CTFFF made it possible to determine quantifiable concentrations for both major and trace elements in separated fractions. However, the sedimentation took 48 h while CTFFF enabled the fractionation time to be decreased down to 2 h. Hence, CTFFF looked to be the most promising method for the separation of NPs followed by their quantitative elemental analysis.

Comparison of preconcentration methods of the colloidal phase of a uranium-containing soil suspension

Three methods of membrane separation by dead-end, tangential, and centrifugal ultrafiltration (UF) were considered in order to understand the physicochemical phenomena occurring during the preconcentration of the colloidal phase of soil water. The analytical approach used involved dynamic light scattering (DLS), transmission electron microscopy (TEM), determination of total organic carbon (TOC-metry) and mass spectrometry (ICP-MS). The mass amounts of the major components of the colloidal phase, i.e. Al, Fe and total organic carbon (TOC), as well as the mass amount of uranium considered as a trace element of environmental interest, were determined, both in soil water, and in the concentrates (i.e. retentates) and filtrates of this water obtained by the 3 methods tested. Dead-end ultrafiltration led to an enlargement of the size distribution towards larger sizes because of agglomeration/aggregation phenomena. This method also generated enrichment of concentrates, in particular in organic matter. The consequence was that large structures were observed coating or embedding the particles initially present individually dispersed in the test sample. The mass amounts of elements and TOC increased more importantly than expected, which confirmed the enrichment of the concentrates from the dissolved phase probably by sorption on colloidal objects. To a lesser extent similar effects were observed after tangential ultrafiltration. Such phenomena were not observed after centrifugal ultrafiltration. From a practical point of view, both tangential and centrifugal ultrafiltration proved to be both the most practical and the best suited for the preconcentration of soil water sample. Finally, centrifugal ultrafiltration has proved to be the best compromise given the preservation of colloidal particles and method practicality.

Colloidal mobilization from soil and transport of uranium in (sub)-surface waters

An analytical methodology was developed to characterize the colloidal distribution of trace elements of interest in environmental waters sampled in a same site and enables the different colloidal distributions from waters to be compared. The purpose was to provide consistent information related to the origin and nature of colloids responsible for the transport of trace element(s). The work was motivated by the observed enhanced mobility of uranium in soil. The colloidal size continuum was investigated by a multi-technique approach involving asymmetric flow field-flow fractionation (AF4) coupled with ultraviolet spectroscopy (UV), multi angle light scattering (MALS), and atomic mass spectrometry (ICPMS). To take into consideration the size and shape variability specific to each sample, the size distributions were established from the gyration radii measured from MALS, also considering the size information from standard nanospheres fractionated by AF4. A new parameter called "shape index" was proposed. It expresses the difference in hydrodynamic behavior between analytes and spherical particles taken as reference. Under AF4 diffusion conditions, it can be considered as an evaluator of the deviation from the sphericity of the fractionated analytes. AF4-UV-MALS-ICPMS enabled the dimensional and chemical characteristics of the colloidal size continuum to be obtained. As a "proof of concept", the developed methodology was applied at a field scale, in a reference study site. In order to have a "dynamic understanding", the investigation was based on the joint characterization of colloids from surface waters and soil leachates from static and dynamic processes. In the water samples of the study site, the continuum of gyration radius ranged from a few nanometers up to 200 nm. Colloids containing iron, aluminum, and organic carbon were involved in the uranium transport in the soil column and surface waters. The colloidal uranium concentration in the surface water increased from the upstream location (approximately 13 ng (U) L^-1) to the downstream location (approximately 60 ng (U) L^-1).

Nanoanalytics: history, concepts, and specificities

This article deals with analytical chemistry devoted to nano-objects. A short review presents nano-objects, their singularity in relation to their dimensions, genesis, and possible transformations. The term nano-object is then explained. Nano-object characterization activities are considered and a definition of nanoanalytics is proposed. Parameters and properties for describing nano-objects on an individual scale and on the scale of a population are also presented. They enable the specificities of analytical activities to be highlighted in terms of multi-criteria description strategies and observation scale. Special attention is given to analytical methods, their dimensioning and validation.

Gold and silver quantification from gold-silver nanoshells in HaCaT cells

A method to determine total gold (Au) and/or silver (Ag) elemental concentrations from gold nanoparticles, Au-Ag nanoshells (NS) and silica coated Au-Ag nanoshells was developed, evaluated and validated. Samples were mineralized in a mixture of concentrated aqua regia and hydrofluoric acid at 65 °C for 4 h. Mineralized solutions were diluted and standard solutions were prepared in aqua regia 5%. ICP-MS analysis was performed with or without the use of a reaction cell (CRC). For the determination of elemental concentrations of nanopowders and test suspensions, the average recovery was 99 ± 2% and 101 ± 2% for gold and silver respectively. The repeatability was evaluated by the Relative Standard Deviation (RSD). The overall analytical RSD was ≤4% (n = 3) and the RSD associated to ICP-MS analysis was ≤2% (n = 10). The limits of detection were 0.005 and 0.002 μg(element) L^-1 (analyzed solution), and the limits of quantitation 0.017 and 0.005 μg(element) L^-1 (analyzed solution), for ¹⁹⁷Au and ¹⁰⁹Ag respectively. The Ag/Au mass ratios of the NS in the different samples considered were all equal to (0.93 ± 0.04). From this information, the average thickness of gold and silver layers in the nanoshells was deduced, being 7.5 ± 0.5 and 23 ± 3 nm respectively. Finally, the developed method was successfully applied to in vitro studies to evaluate NS cellular uptake in HaCaT keratinocyte cells confirming the method robustness toward biological medium. Experiments in cell culture medium gave coherent concentrations, 70-100% of uncoated or silica-coated NS being recovered, distributed between the culture medium and the cells (internalized). The analytical repeatability (over the whole procedure, or that of the ICP-MS analysis only) remains in the same order of magnitude as in test suspensions. Minimum concentrations less than or equal to 1 μg(element) g^-1(suspension) were determined with the same accuracy.

Diffusive Milli-Gels (DMG) for in situ assessment of metal bioavailability: A comparison with labile metal measurement using Chelex columns and acute toxicity to Ceriodaphnia dubia for copper in freshwaters

Fluctuations in concentrations of bioavailable metals occur in most natural waters. In situ measurements are desirable to predict risks of adverse effects to aquatic organisms. We evaluated Diffusive Milli-Gels (DMG), a new in situ passive sampler, for assessing the bioavailability and toxicity of copper in waters exhibiting a wide range of characteristics. The performance was compared to an established Chelex-column method that measures labile copper concentrations by discrete sampling, and the ability to predict acute toxicity to the cladoceran, Ceriodaphnia dubia. The labile copper concentrations measured by the DMG and Chelex-column methods decreased with increasing dissolved organic carbon (DOC) (1.9-15 mg L^-1) and hardness (21-270 mg CaCO₃ L^-1 hardness), with 20-70% of total dissolved copper being present as labile copper. Toxicity decreased with increasing DOC and hardness. Strong linear relationships existed between the EC50 for C. dubia and DOC, and when the EC50 was related to either the labile copper concentrations measured by DMG (r² = 0.874) or the Chelex column (0.956) methods. The study demonstrates that the DMG passive sampler is a relevant tool for the in situ assessment of environmental risks posed by metals whose toxicity is strongly influenced by speciation.

Design and Cellular Fate of Bioinspired Au-Ag Nanoshells@Hybrid Silica Nanoparticles

Silica-coated gold-silver alloy nanoshells were obtained via a bioinspired approach using gelatin and poly-l-lysine (PLL) as biotemplates for the interfacial condensation of sodium silicate solutions. X-ray photoelectron spectroscopy was used as an efficient tool for the in-depth and complete characterization of the chemical features of nanoparticles during the whole synthetic process. Cytotoxicity assays using HaCaT cells evidenced the detrimental effect of the gelatin nanocoating and significant induction of late apoptosis after silicification. In contrast, PLL-modified nanoparticles had less biological impact that was further improved by the silica layer, and uptake rates of up to 50% of those of the initial particles could be achieved. These results are discussed considering the effect of nanosurface confinement of the biopolymers on their chemical and biological reactivity.

Need for revisiting the terminology about speciation

ᅟThe term speciation is used for over 30 years, with different meanings. In the early 2000s, a reference definition was proposed. The elemental distribution is discussed only with respect to molecular structures. Polytatomic entities such as amorphous or crystalline structures, dispersed in a liquid or gas, or in the solid phase, are not taken into account. The distribution of the element, both at the interfaces and in the solids, is not yet considered. This editorial discusses the limitations of this definition and its consequences. The different terminologies proposed from the reference definition are also discussed. Given all these considerations, it is proposed that speciation is considered as a description of the physical and chemical characteristics of an element. This description should be given from the atomic scale of this element to the scale of the surrounding medium, in the continuum of size, from the dissolved or gaseous phase to the solid phases.

The fate of iron nanoparticles in environmental waters treated with nanoscale zero-valent iron, FeONPs and Fe3O4NPs

Among the different nanoparticles (NPs) that are used in the remediation of contaminated environmental waters, iron nanoparticles (FeNPs) are the most frequently applied. However, if these FeNPs remain in the waters after the treatment, they can cause a hazard to the environment. In this work the time dependent size distribution of iron particles was investigated in Milli-Q water, forest spring water and landfill leachate after a variety of FeNP treatments. The efficiency of the metal removal by the FeNPs was also examined. The concentrations of the metals in the aqueous samples were determined before and after the nano-remediation by inductively coupled plasma mass spectrometry (ICP-MS). The data revealed that the settling and removal of the FeNPs after the treatment of the waters was related to the sample characteristics and the ways of dispersing the NPs. When mixing was used for the dispersion, the nano zero-valent iron (nZVI), FeONPs and Fe3O4NPs settled quickly in the Milli-Q water, the forest spring water and the landfill leachate. Dispersion with tertramethylammonium hydroxide (TMAH) resulted in a slower settling of the iron aggregates. In the Milli-Q and forest spring waters treated with FeONPs and dispersed by TMAH, the nanosized iron remained in solution as long as 24 h after the treatment and could represent a potential threat in environmental waters with a low ionic strength. The removal of the metals strongly depended on the type of FeNPs, the chemical speciation of the elements and the sample matrix. If the FeNPs are contaminated by a particular metal, this contaminant could be, during the NPs treatment, released into the water that is being remediated.

Quantification of titanium from TiO2 particles in biological tissue

This study presents the development of a strategy for the quantification of titanium from titanium dioxide polydisperse particles (TiO2) in dry biological tissue. Calf liver was chosen as laboratory testing material. The challenge was to (i) obtain a complete mineralization of the solid material (biological tissue and TiO2) and (ii) ensure the accuracy of the determined concentrations with a sufficient sensitivity. Mineralization was performed using a mixture of concentrated nitric and hydrofluoric acids. Atomic mass spectrometry associated with light-scattering technique was used to control the physical state (dissolved and particle forms) of titanium and reliably estimate the total titanium concentration in calf liver. The monitoring of (46)Ti and (49)Ti, operating in helium collision/reaction cell mode, and using external calibration with internal standard addition, allowed the quantification of Ti while removing isobaric interferences. The limit of detection and quantification were 0.7 and 2.3μg (Ti)g(-1) (tissue) respectively. The mean analytical recovery over the whole procedure was (103±6)% in a range of concentrations from LOD to 200μg(Ti)g(-1) (tissue).

Adsorption and degradation processes of tributyltin and trimethyltin in landfill leachates treated with iron nanoparticles

Biotic and abiotic degradation of toxic organotin compounds (OTCs) in landfill leachates is usually not complete. In this work adsorption and degradation processes of tributyltin (TBT) and trimethyltin (TMeT) in leachate sample treated with different iron nanoparticles (FeNPs): Fe(0) (nZVI), FeO and Fe3O4 were investigated to find conditions for their efficient removal. One sample aliquot was kept untreated (pH 8), while to the others (pH 8) FeNPs dispersed with tetramethyl ammonium hydroxide (TMAH) or by mixing were added and samples shaken under aerated conditions for 7 days. The same experiments were done in leachates in which the pH was adjusted to 3 with citric acid. Size distribution of TBT and TMeT between particles >5 µm, 0.45-5 µm, 2.5-0.45 µm, and <2.5 nm was determined by sequential filtration and their concentrations in a given fraction by gas chromatography coupled to inductively coupled plasma mass spectrometry (GC-ICP-MS). Results revealed that most of the TBT or TMeT was present in fractions with particles >2.5 or <2.5 nm, respectively. At pH 8 adsorption of TBT to FeNPs prevailed, while at pH 3, the Fenton reaction provoked degradation of TBT by hydroxyl radicals. TBT was the most effectively removed (96%) when sequential treatment of leachate with nZVI (dispersed by mixing) was applied first at pH 8, followed by nZVI treatment of the aqueous phase, previously acidified to pH 3 with citric acid. Such treatment less effectively removed TMeT (about 40%). It was proven that TMAH provoked methylation of tin, so mixing was recommended for dispersion of nZVI.

Isotopic investigation of the colloidal mobility of depleted uranium in a podzolic soil

The mobility and colloidal migration of uranium were investigated in a soil where limited amounts of anthropogenic uranium (depleted in the 235U isotope) were deposited, adding to the naturally occurring uranium. The colloidal fraction was assumed to correspond to the operational fraction between 10 kDa and 1.2 μm after (ultra)filtration. Experimental leaching tests indicate that approximately 8-15% of uranium is desorbed from the soil. Significant enrichment of the leachate in the depleted uranium (DU) content indicates that uranium from recent anthropogenic DU deposit is weakly bound to soil aggregates and more mobile than geologically occurring natural uranium (NU). Moreover, 80% of uranium in leachates was located in the colloidal fractions. Nevertheless, the percentage of DU in the colloidal and dissolved fractions suggests that NU is mainly associated with the non-mobile coarser fractions of the soil. A field investigation revealed that the calculated percentages of DU in soil and groundwater samples result in the enhanced mobility of uranium downstream from the deposit area. Colloidal uranium represents between 10% and 32% of uranium in surface water and between 68% and 90% of uranium in groundwater where physicochemical parameters are similar to those of the leachates. Finally, as observed in batch leaching tests, the colloidal fractions of groundwater contain slightly less DU than the dissolved fraction, indicating that DU is primarily associated with macromolecules in dissolved fraction.

Saponins: a renewable and biodegradable surfactant from its microwave-assisted extraction to the synthesis of monodisperse lattices

Synthetic surfactants are widely used in emulsion polymerization, but it is increasingly desirable to replace them with naturally derived molecules with a reduced environmental burden. This study demonstrates the use of saponins as biodegradable and renewable surfactants for emulsion polymerization. This chemical has been extracted from soapnuts by microwave assisted extraction and characterized in terms of surfactant properties prior to emulsion polymerization. The results in terms of particle size distribution and morphology control have been compared to those obtained with classical nonionic (NP40) or anionic (SDS) industrial surfactants. Microwave-extracted saponins were able to lead to latexes as stable as standard PS latex, as shown by the CMC and CCC measurements. The saponin-stabilized PS particles have been characterized in terms of particle size and distribution by Dynamic Light Scattering and Asymmetrical Flow Field Flow Fractionation. Monomodal and monodispersed particles ranging from 250 to 480 nm in terms of diameter with a particle size distribution below 1.03 have been synthesized.

Assessment of diffuse contamination of agricultural soil by copper in Aquitaine region by using French national databases

A long-term application of copper-based fungicides to fight against downy mildew has led to soil contamination by copper particularly in Aquitaine region where viticulture is important. This work aims to statistically validate the origin of diffuse contamination of Aquitaine agricultural soils and show that contamination is closely related to wine-growing in this region. For this purpose, several national databases have been used. From the French National Soil Monitoring Network (Réseau de Mesures de la Qualité des sols RMQS) data, an Exploratory Data Analysis (EDA) was performed to bring out the copper contamination. The French test soil database (Base de Données des Analyses de Terre BDAT) and the national census of agriculture (Recensement Général Agricole RGA) have been crossed. A statistical approach has been used to determine the relationship between the median concentration of copper extracted by Ethylene Diamine Tetra-acetic Acid (EDTA) referred to as CuEDTA in cultivated topsoils of the Aquitaine region and the ratio between winegrowing area (Svine) and the Used Agricultural Area (UAA) expressed as the form Svine/UAA. The results revealed a strongly significant exponential correlation between these two variables. They allow concluding that at cantonal scale, when vines cover more than 80% of the UAA, an overexposure of soils to the diffuse contamination by copper can occur.

Size characterization of the associations between carbon nanotubes and humic acids in aqueous media by asymmetrical flow field-flow fractionation combined with multi-angle light scattering

This work focuses on the influence of humic acids (HAs) on the fate of carbon nanotubes (CNTs) in aqueous media. This influence was demonstrated by mixing CNT powder with HAs in aqueous solution in varying concentrations. The aqueous media containing HAs and CNTs were size-characterized by asymmetrical flow field-flow fractionation (AsFlFFF) coupled with multi-angle light scattering (MALS). This coupling yielded information concerning the size distribution of single- and multi-walled CNTs (SWCNTs and MWCNTs) and HAs under different physico-chemical conditions that can occur in environmental water. HAs can disperse individual CNTs in aqueous media. However, the difference in the physical structure between SWCNTs and MWCNTs leads to significant differences in the quantity of HA that can adsorb onto the nanotube surface and in the stability of the CNT/HA complex. Compared with MWCNTs, SWCNTs suspended in HAs are less affected by changing ionic strength with respect to stability and the amount suspended.

Multi-wall carbon nanotube aqueous dispersion monitoring by using A4F-UV-MALS

In this work, the potentiality of asymmetrical flow field-flow fractionation (A4F) hyphenated to UV detector and multi-angle light scattering (MALS) was investigated for accurately determining multi-walled carbon nanotube (MWCNT) length and its corresponding dispersion state in aqueous medium. Fractionation key parameters were studied to obtain a method robust enough for heterogeneous sample characterization. The main A4F conditions were 10(-5) mL min(-1) NH(4)NO(3), elution flow of 1 mL min(-1), and cross flow of 2 mL min(-1). The recovery was found to be (94 ± 2)%. Online MALS analysis of eluted MWCNT suspension was performed to obtain length distribution. The length measurements were performed with a 4% relative standard deviation, and the length values were shown to be in accordance with expected ones. The capabilities of A4F-UV-MALS to size characterize various MWCNT samples and differentiate them according to their manufacturing process were evaluated by monitoring ball-milled MWCNT and MWCNT dispersions. The corresponding length distributions were found to be over 150-650 and 150-1,156 nm, respectively. A4F-UV-MALS was also used to evaluate MWCNT dispersion state in aqueous medium according to the surfactant concentration and sonication energy involved in the preparation of the dispersions. More especially, the presence or absence of aggregates, number and size of different populations, as well as size distributions were determined. A sodium dodecyl sulfate concentration of 15 to 30 mmol L(-1) and a sonication energy ranged over 20-30 kJ allow obtaining an optimal MWCNT dispersion. It is especially valuable for studying nanomaterials and checking their manufacturing processes, size characterization being always of high importance.

Colloidal transport of uranium in soil: Size fractionation and characterization by field-flow fractionation-multi-detection

The aim of this study was to characterize colloids associated with uranium by using an on-line fractionation/multi-detection technique based on asymmetrical flow field-flow fractionation (As-Fl-FFF) hyphenated with UV detector, multi angle laser light scattering (MALLS) and inductively coupling plasma-mass spectrometry (ICP-MS). Moreover, thanks to the As-Fl-FFF, the different colloidal fractions were collected and characterized by a total organic carbon analyzer (TOC). Thus it is possible to determine the nature (organic or inorganic colloids), molar mass, size (gyration and hydrodynamic radii) and quantitative uranium distribution over the whole colloidal phase. In the case of the site studied, two populations are highlighted. The first population corresponds to humic-like substances with a molar mass of (1500+/-300)gmol(-1) and a hydrodynamic diameter of (2.0+/-0.2)nm. The second one has been identified as a mix of carbonated nanoparticles or clays with organic particles (aggregates and/or coating of the inorganic particles) with a size range hydrodynamic diameter between 30 and 450nm. Each population is implied in the colloidal transport of uranium: maximum 1% of the uranium content in soil leachate is transported by the colloids in the site studied, according to the depth in the soil. Indeed, humic substances are the main responsible of this transport in sub-surface conditions whereas nanoparticles drive the phenomenon in depth conditions.

Tributyltin and triphenyltin uptake by lettuce

This paper provides quantitative information on the transfer of TBT (tributyltin) and TPhT (triphenyltin) from sludged soil to cultivated lettuce. The effect of their initial concentrations in the soil (varying from 20 to 50 microg(Sn)kg(-1) for each triorganotin), sludge amount (between 1% and 9%), and cultivation duration (32-54 days) was evaluated by means of experimental designs. The impact of the cultivation temperature at 13 degrees C and 19 degrees C on organotin fate in the soil/plant system was also considered. The final concentration of a given organotin in the plant roots was found to depend directly on its initial concentration in the soil. A total of (85+/-15)% of initial TBT in the soil was still present at the end of the experiments, regardless of the cultivation duration. Consequently, TBT appeared to be taken up by lettuce continually. A total of (75+/-5)% of TPhT was found to be degraded in the soil at 54 days. So, this compound could have been taken up by the plant at the beginning of the cultivation. Sludge amount seemed to have a negative effect on TPhT concentration in a plant at 32 days. This could be due to the quantitative TPhT sorption onto the sludge, observed just after spiking. Organotin plant uptake appeared to be more important at 19 degrees C than at 13 degrees C. TBT and TPhT were mainly accumulated in the roots, and up to 2% and 10% of TPhT and TBT, respectively, were translocated to the shoots. Despite TPhT degradation, products in large amounts were present in the soil and were not significantly taken up by the plant. They possibly remained immobilized on solid phases of the sludged soil.

Kinetic degradation processes of butyl- and phenyltins in soils

The degradation of organotin compounds (OTC) in agricultural and forest soils is studied in sandy soil samples. Individual experiments involving the three butyl- and the three phenyltins were carried out during 90 d in controlled conditions (darkness, 28 degrees C, aerobic conditions, 13% moisture) and with spiking concentration representative of environmental levels (20-50 micrg(Sn) kg(-1)). After the validation of first-order degradation kinetic model, mechanisms involved throughout the study were considered. Degradation pathways are proposed for butyl- and phenyltins and discussed according to literature data. The degradation of mono- (MBT, MPhT), di-organotins (DBT, DPhT) and TBT is clearly identified as a single successive loss of an organic group whereas TPhT is directly degraded to MPhT. The half-life times were dependent on their substitution degree, ranging from 24 (TPhT) to 220 (MBT) d. The less substituted the OTC is, the more persistent it is. In the range 4.3-5.7, pH does not seem to influence OTC degradation under the present operating conditions. Finally this study shows the significant persistence in soil samples in our experimental conditions for most of studied organotins and highlights the potential impact on soil quality.

TBT and TPhT persistence in a sludged soil

The persistence of tributyltin (TBT) and triphenyltin (TPhT) in soils was studied, taking into consideration the quantity of sewage sludge, TBT and TPhT concentrations in soil as well as the soil pH. The organotin compounds (OTC) were introduced into the soil via a spiked urban sludge, simulating agricultural practise. OTC speciation was achieved after acidic extraction of soil samples followed by gas chromatography-pulsed flame photometric analysis (GC-PFPD). Leaching tests conducted on a spiked sludge showed that more than 98% of TBT are sorbed on the sludge. TBT persistence in soil appeared to depend on its initial concentration in sludge. Thus, it was more important when concentration is over 1000 microg(Sn) kg(-1) of sludge. More than 50% of the initial TBT added into the soil were still present after 2 months, whatever the experimental conditions. The main degradation product appeared to be dibutyltin. About 90% of TPhT were initially sorbed on sludge, whatever the spiking concentration in sludge was. However, TPhT seemed to be quantitatively exchangeable at the solid/liquid interface, according to the leaching tests. It was also significantly degraded in sludged soil as only about 20% of TPhT remain present after 2 months, the monophenyltin being the main degradation product. pH had a significant positive effect on TBT and particularly TPhT persistence, according to the initial amounts introduced into the soil. Thus, at pH over 7 and triorganotin concentration over 100 microg(Sn) kg(-1), less than 10% of TBT but about 60% of TPhT were degraded. When the sludge was moderately contaminated by triorganotins (typically 50 microg(Sn) kg(-1) in our conditions) the pH had no effect on TBT and TPhT persistence.

Determination of organotin compounds by headspace solid-phase microextraction–gas chromatography–pulsed flame-photometric detection (HS-SPME–GC–PFPD)

A method based on Headspace solid-phase microextraction (HS-SPME, with a 100 mum PDMS-fiber) in combination with gas-chromatography and pulsed flame-photometric detection (GC-PFPD) has been investigated for simultaneous determination of eight organotin compounds. Monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), monophenyltin (MPhT), and the semi-volatile diphenyltin (DPhT), triphenyltin (TPhT), monooctyltin (MOcT), and dioctyltin (DOcT) were determined after derivatization with sodium tetraethylborate. The conditions used for the extraction and preconcentration step were optimised by experimental design methodology. Tripropyltin (TPrT) and diheptyltin (DHepT) were used as internal standards for quantification of volatile and semi-volatile organotin compounds, respectively. The analytical precision (RSD) for ten successive injections of a standard mixture containing all the organic tin compounds ranged between 2 and 11%. The limits of detection for all the organotin compounds were sub ng (Sn) L(-1) in water and close to ng (Sn) kg(-1) in sediments. The accuracy of the method was evaluated by analysis of two certified reference material (CRM) sediment samples. The HS-SPME-GC-PFPD was then applied to the analysis of three harbour sediment samples. The results showed that headspace SPME is an attractive tool for analysis of organotin compounds in solid environmental matrices.

Organotin speciation in Bizerte lagoon (Tunisia)

For the first time, organotins have been assessed in samples collected from Bizerte lagoon, in Tunisia, during two seasons (summer and winter). The organotin distribution was studied in marine sediments and mussels tissues of this lagoon. Butyl-, phenyl- and octyltins were determined using a rapid speciation analytical method based on one-step ethylation/extraction with sodium tetraethylborate in aqueous phase. Simultaneously to the ethylation, the extraction was performed by either liquid/liquid extraction (LLE) or head-space solid phase microextraction (HS-SPME). Gas chromatography with pulsed flame photometric detection (GC-PFPD) was used to perform quantitative determination. The technique has been validated using biological and sediment reference materials. The different samples from Bizerte lagoon were found to be moderately contaminated, especially by butyltins. This pollution was attributed to industrial activities, which are very important in this area. Organotins appeared accumulated in both sediments and mussels, while significant degradations of triorganotins to monosubstituted ones was observed in water.

Pressurised solvent extraction for organotin speciation in vegetable matrices

Because organotin compounds (OTC) are widely used in many fields of activity, they have become an ubiquitous environmental presence. The presence of organotins in the environment impacts upon food safety, making it important to monitor the levels of organotin pesticides in fruits and vegetables. Nevertheless, only a few studies have been published on organotin speciation in plants. The objective of the present study was to evaluate and optimise a specific procedure based on pressurised solvent extraction (PSE) that is suitable for monitoring organotin content in vegetables. In ASE, solvents are used at elevated temperatures and pressures to increase the rate and efficiency of the extraction process. The results from this procedure were compared to those from the technique usually employed, solid/liquid extraction (SLE) performed in an acidic solvent by mechanical shaking. Three extracting solutions were tested-methanol, ethyl acetate and a mixture of methanol and ethyl acetate-and the mixture was found to give the most quantitative results while preserving the speciation. French bean and lettuce leaves as well as potato tubers were used as the plant materials. These vegetables were considered because they are the vegetables consumed in the most quantities in Europe. The study focuses on trisubstituted OTCs, which are the most toxic tin species. The samples were spiked with four trisubstituted organotins: tributyltin (TBT), triphenyltin (TPhT), tricyclohexyltin (TcHexT) and trioctyltin (TOcT). The influence of the pressure and the temperature of the PSE on the quantitativity of the process and on species preservation was evaluated using the experimental design methodology. The optimised PSE allowed detection limits down to 1-2 ng (Sn) g(-1) to be reached. These are higher than those obtained by SLE (0.1-1 ng (Sn) g(-1)). Although the repeatability is similar for both PSE and SLE (2-12% for triorganotin compounds), this appears to be highly time-dependent in the case of SLE. Comparison with SLE confirms that PSE is an interesting tool for vegetable analysis considering the satisfactory OTC preservation and repeatability obtained for a relatively short extraction duration (only 15 min against 2-12 h for SLE).

Organotin survey in the Adour-Garonne basin

Organotin monitoring was performed in waters of 11 rivers of the southwest of France during a 9 months period, between February and October 2001. Surface sediments were studied during the summer. Eighteen sampling points were chosen as representative of specific industrial or agricultural activities. In most samples, organotins were detected and butyltins are the most frequently present, with concentrations ranging over 0.2-30 ng(Sn)/L. Phenyltins were detected especially in spring and at the end of summer, which corresponds to likely diffusion from agricultural sources. Some high butyl- and phenyltin concentrations up to 700 ng(Sn)/L occurred during the spring where pesticides for agricultural activities were largely used. Octyltins were present in water frequently as well, with lower concentrations, probably originating from continuous leaching of plastics. Sediments appeared contaminated by the same species, with higher monobutyltin concentrations of about 30-40 microg(Sn)/kg which shows the importance of biological degradations occurring in surface sediments. This non-pesticidal organotin compounds can also be introduced from leaching of organotin-stabilized PVC by water. Using the different organotin concentrations obtained and other physico-chemical parameters measured, such as temperature or water flow rate, a statistical study was performed by principal component analysis. The results obtained allow the main sources of organotin diffusion to be identified and the hydrological cycle of these compounds better understand.

Physico-chemical approach to study organotin sorption-desorption during solid-phase microextraction

Solid-phase microextraction (SPME) has become a real alternative to liquid-liquid extraction in the field of speciation of organometallic compounds. Despite the high performance of this preconcentration technique, matrix effects in natural samples can affect the analytical precision. In order to understand the origin of these disturbances and control the extraction step as best as possible, the sorption-desorption behaviour of organotins was studied. In the first part, this paper discusses the analytical problems encountered in the daily use of SPME due to the particular problems observed for phenyltins. The sorption profile of these compounds was modelled using experimental design methodology to confirm the first-order kinetics. Desorption of the compounds was also observed after a given time and could not be attributed to competition between organotin compounds. In the same way, butyl- and phenyltins were studied in the presence of humic substances, which acted as representatives of organic matter found in natural samples. These substances drastically decrease the extraction yields, but do not affect the sorption profile of butyl- and phenyltins.