Trace-level quantification of N-nitrosopiperazine in treated wastewater using supported liquid extraction and hydrophilic interaction chromatography mass spectrometry

Regenerable amine-based solvents used for post-combustion CO2 capture, primarily monoethanolamine and piperazine, are known to undergo degradation and secondary reactions over time forming, amongst other species, N-nitrosamines. These carcinogenic species can eventually make their way from treated wastewater into environmental waters. The United States Environmental Protection Agency (US EPA) recommends that the concentration of N-nitrosamines in surface water not exceed 1.24 μg/L. We have developed a straightforward method to quantify N-nitrosopiperazine in treated wastewater by hydrophilic interaction liquid chromatography – mass spectrometry (HILIC–MS) after sample preparation by supported liquid extraction (SLE). To achieve the best extraction recovery and method limits of quantification (MLOQ), standards were prepared in a high-salt synthetic matrix to mimic the treated wastewater effluent. To further improve the MLOQ, the drying steps after extraction were optimized. HILIC separation of the highly polar analytes was achieved using an ethylene-bridged hybrid amide stationary phase. Detection was achieved using a triple quadrupole mass spectrometer operated in positive electrospray ionisation and multiple reaction monitoring mode, providing a final MLOQ of 0.25 μg/L for N-nitrosopiperazine. Validation of the method was carried out to ensure good confidence in the data obtained for a treated wastewater sample from a post-combustion CO2 capture facility. In addition, N-nitrosopiperazine was quantified with the developed SLE-HILIC–MS method in eight degraded carbon capture samples that had not yet undergone wastewater treatment.

Cholic acid dimers as invertible amphiphilic pockets: synthesis, molecular modeling, and inclusion studies

Two dimers of cholic acid were synthesized through simple covalent linkers. The dimers form invertible molecular pockets in media of different polarity; hydrophobic pockets are formed in water and hydrophilic pockets are formed in organic media. Fluorescence studies show that pockets formed by these dimers can serve as invertible hosts for the hydrophobic guest pyrene and the hydrophilic guest coumarin 343. The molecular pocket also enhances dissolution of the weakly soluble cresol red sodium salt in organic media. Molecular modeling was performed to better understand the host–guest complexation process of the invertible amphiphilic pockets. The calculated free energy changes indicate that the two dimers form the most stable complexes with coumarin 343 at a host to guest ratio of 2:2, whereas the host to guest ratio differs in the formation of complexes with pyrene for the two dimers. The dimer with the shorter, less flexible linker seems to form host–guest complexes that are more stable in both water and organic solvents.

Self-Assembly of a Bile Acid Dimer in Aqueous Solutions: From Nanofibers to Nematic Hydrogels

A mixture of a cholic acid dimer with a secondary amine group and formic acid at a molar ratio of 1/1 is regarded as an organic salt, and it self-assembles in aqueous solutions to form monodisperse nanofibers. The nanofibers are separated at low concentrations of the mixture but entangle with each other at high concentrations to form well-dispersed and randomly arranged 3D fibrous networks. Above the minimum gelation concentration of the dimer, the fibrous network is strong enough to gelate the aqueous solutions to form a hydrogel. Hydrogels obtained from the dimer salt at a lower concentration are isotropic and show extinction between crossed polarizers in the polarizing microscope, whereas they become anisotropic (i.e., nematic hydrogels) upon increasing the dimer salt concentration or under physical stirring. The parallel arrangement of nanofibers from randomly directed fibrous networks may be responsible for the formation of such nematic hydrogels.

Supramolecular hydrogelation with bile acid derivatives: structures, properties and applications

Bile acid derivatives can form molecular hydrogels that may be useful for drug delivery, tissue engineering and nanotemplating.

Formation of molecular hydrogels from a bile acid derivative and selected carboxylic acids

A cholic acid dimer forms hydrogels with selected carboxylic acids via protonation and hydrogen bonding.

Development of glutaraldehyde-crosslinked chymotrypsin and an in situ immobilized enzyme microreactor with peptide mapping by capillary electrophoresis

Immobilized proteolytic enzymes present several advantages over their soluble form, not the least of which is suppression of autoproteolysis peaks even at high enzyme-to-substrate ratios. We have made immobilized chymotrypsin by directly crosslinking it with glutaraldehyde to produce polymeric particles. Digestion of two model substrates using the particles was followed by CE peptide mapping with detection by UV absorbance or LIF. Results showed that autoproteolysis was highly suppressed and that different storage conditions of the particles in the short term (24 h) did not affect digestion of denatured BSA. As well, the chymotrypsin particles were indifferent to the presence of fluorescein groups on a casein substrate. Glutaraldehyde crosslinking of chymotrypsin inside a fused silica capillary column to make an immobilized enzyme reactor (IMER) was achieved in a series of reagent addition and washing steps, entirely automated using a commercial CE instrument. Digestion of myoglobin in the IMER for 30 min at 37°C followed by peptide mapping by CE-MS of the collected digest allowed identification of 17 chymotryptic peptides of myoglobin, or 83% primary sequence coverage.

Chemical profiling of the deacetylase activity of acetyl xylan esterase A (AxeA) variants on chitooligosaccharides using hydrophilic interaction chromatography-mass spectrometry

Chitosan oligosaccharides (oligomers of (GlcNAc)(x)(GlcN)(y)) are used in the pharmaceutical, cosmetic and food industries and are reported to have therapeutic benefits. However, it is unknown whether their biological activity depends on the degree of deacetylation or the sequence of residues within the oligomer. We report here the development of a random mutagenesis method for directed evolution of Streptomyces lividans acetyl xylan esterase (AxeA), which we previously showed is able to deacetylate chitinous substrate, in order to obtain chitooligosaccharides with well-defined structural properties. A colorimetric assay was used to pre-screen libraries for p-nitrophenol acetate hydrolysis activity and an HPLC-UV absorbance assay was optimized to subsequently screen for deacetylase activity toward hexa-N-acetyl-glucosamine substrate (GlcNAc)(6). Native AxeA and two variants displaying>50% deacetylation of the oligohexamer substrate after reaction at 50°C for 24h in diluted culture supernatant were then selected for detailed analysis of the enzymatic products. A HILIC (hydrophilic interaction chromatography)-mode LC method was developed for profiling the deacetylated chitooligosaccharide products and HILIC-MS/MS sequencing revealed that ca. 30 different deacetylation products ranging from (GlcNAc)(5)(GlcN)(1) to (GlcNAc)(1)(GlcN)(5) and isomers thereof were produced. The AxeA variants produced, on average, 26% more unique products than the native enzyme; however, none were able to fully deacetylate the substrate to make (GlcN)(6). The long term goal of this multidisciplinary approach is to improve the activity of chitosan oligosaccharides to an industrially applicable level.

Oxidative Aggregation of Ceruloplasmin Induced by Hydrogen Peroxide is Prevented by Pyruvate

Ceruloplasmin (CP) is a blue copper glycoprotein with multiple physiological functions including ferroxidase and oxidase activities. CP is also an important serum oxygen free radical (OFR) scavenger and antioxidant, exerting cardioprotective and antifibrillatory actions. Although it has been reported that CP activities can be inhibited by OFR, the intimate mechanism of this inactivation is still not clear. Exposure of bovine CP to H2O2 induced inactivation of the protein as well as structural alterations as indicated by loss of protein bands by SDS-PAGE. Both phenomena were H2O2 concentration and time dependent. HPLC gel filtration and capillary electrophoresis analysis of CP treated with H2O2 revealed an aggregation of the protein. Quantification of dityrosine formation by fluorescence indicated the involvement of dityrosine bridging, which could be responsible for aggregation of CP under oxidative attack. Oxidative damage to CP under H2O2 treatment was completely prevented by pyruvate, suggesting that the association of CP with antioxidants could extend the range of the protective action of this protein.

Sequential fractionation with concurrent chemical and toxicological characterization of the combustion products of chlorogenic acid

Chlorogenic acid is the most abundant polyphenol found in the tobacco plant. The biological effects of its combustion products remain largely unknown. In this study, chlorogenic acid was burned at 640 degrees C for 2 min and the particulate matter of the smoke was collected onto Cambridge filter pads followed by selective extraction in five different solvents. Various fractions of the chlorogenic acid combustion products were tested for induction of micronuclei in V79 Chinese hamster fibroblast cells. Over 40 compounds were identified in the dimethyl sulfoxide (DMSO) extract by high-performance liquid chromatography coupled to electrospray time-of-flight mass spectrometry (HPLC/TOF-MS). The DMSO extract was then fractionated into three major fractions by preparative LC. The fraction inducing the highest degree of toxicity was further separated into four sub-fractions. The sub-fraction responsible for the most toxic response was determined to contain catechol as its major component. The overall reproducibility of the combustion, the extraction procedure and the chemical characterization of the compounds responsible for the toxicity in the chlorogenic acid smoke were evaluated by LC/TOF-MS.

Synthesis and enzymatic stability of PEGylated oligonucleotide duplexes and their self-assemblies with polyamidoamine dendrimers

The objectives of the current study were to design and characterize poly(ethylene glycol) (PEG)-based carriers for antisense oligonucleotide (AON) delivery that would gradually release the AON upon the enzymatic degradation of a complementary nuclease-sensitive sequence (SON). A phosphodiester SON was conjugated to one extremity or to the central part of PEG (molecular weight 10 or 20 K). The PEG-SON was hybridized to a nuclease-resistant phosphorothioate AON analog. Compared to the non-PEGylated duplex, the PEG-SON/AON derivative had a modest impact on the degradation kinetics of SON as monitored by a fluorescence dequenching assay performed in the presence of DNase 1. The reaction rate depended on the grafting position of SON and on the PEG's molecular weight. To further control the release rate, PEG-SON/AON conjugates were complexed to poly(amidoamine) (PAMAM) dendrimers of different generations (G). Interaction with PAMAMs of G3 and G5 yielded monodisperse polyion complex micelles (PICMs) with average mean sizes ranging from 70 to 100 nm. The PICMs were found to decrease the catalytic reaction rate by 20 to 100 fold; the slowest release kinetics being achieved with PEG10K-SON/AON/G5 PAMAM. The PEGylated conjugates reported in this manuscript as well as their self-assemblies with PAMAMs, could prove potentially useful to confer prolonged circulating properties to nucleic acid drugs and release them in a sustained manner.

Identification of unusual bacterial glycosylation by tandem mass spectrometry analyses of intact proteins

The characterization of protein glycosylation can be a complex and time-consuming procedure, especially for prokaryote O-linked glycoproteins, which often comprise unusual oligosaccharide structures with no known glycosylation motif. In this report, we describe a "top-down" approach that provides information on the extent of glycosylation, the molecular masses, and the structure of oligosaccharide residues on bacterial flagella, important structural proteins involved in the motility of pathogenic bacteria. Flagella from four bacterial pathogens, namely, Campylobacter jejuni, Helicobacter pylori, Aeromonas caviae, and Listeria monocytogenes, were analyzed by this top-down mass spectrometry approach. The approach needs minimal sample preparation and can be performed within a few minutes compared to the tedious and often time-consuming "bottom-up" approach involving proteolytic digestion and LC-MS-MS analyses of the suspected glycopeptides. Multiply protonated protein precursor ions subjected to low-energy collisional activation in a quadrupole time-of-flight instrument showed extensive and specific gas-phase deglycosylation resulting in the formation of abundant oxonium ions with very few fragment ions from peptidic bond cleavages. Structural information on individual carbohydrate residues is obtained using a second-generation product ion scan of oxonium ions formed by collisional activation of the intact protein ions in the source region. The four bacterial flagella examined differed not only by the extent of glycosylation but also by the nature of carbohydrate substituents. For example, the flagellin from the Gram-positive bacterium, L. monocytogenes showed O-linked GlcNAc residues at up to 6 sites/protein monomer. In contrast, the three Gram-negative bacterial pathogens C. jejuni, H. pylori and A. caviae displayed up to 19 Ser/Thr O-linked sites modified with residues structurally related to N-acetylpseudaminic acid (Pse5Ac7Ac) and in the case of Campylobacter include a novel N-acetylglutamine substituent on Pse5Am7Ac.

Capillary electrophoresis separation of a mixture of chitin and chitosan oligosaccharides derivatized using a modified fluorophore conjugation procedure

A capillary electrophoresis (CE) method was developed for the simultaneous analysis of small chitin and chitosan oligosaccharides. For detection purposes, the oligomers were derivatized with 8-aminopyrene-1,3,6-trisulfonic acid (APTS), a well known fluorophore for oligosaccharides analysis. The detection was performed by laser-induced fluorescence (LIF) with an argon ion laser having an excitation wavelength of 488 nm and with emission monitored at 520 nm. Derivatization parameters such as reaction time and conditions were examined. Separation conditions were also varied by testing a range of buffer pHs and concentrations. The best conditions were found using an 80 mM borate buffer at pH 8.4. This CE-LIF optimized method was used for the analysis of an enzymatically produced oligo-chitosan sample composed of a complex mixture and having an average degree of polymerization of 3.7 monomer units and 80% deacetylation. The oligo-chitosan sample was treated with a chitin deacetylase-like enzyme, the products were derivatized with APTS, and then analyzed without purification. The goal was to determine whether the deacetylase-like enzyme could increase the extent of deacetylation of the oligo-chitosan sample.

Glutaraldehyde: behavior in aqueous solution, reaction with proteins, and application to enzyme crosslinking

Glutaraldehyde possesses unique characteristics that render it one of the most effective protein crosslinking reagents. It can be present in at least 13 different forms depending on solution conditions such as pH, concentration, temperature, etc. Substantial literature is found concerning the use of glutaraldehyde for protein immobilization, yet there is no agreement about the main reactive species that participates in the crosslinking process because monomeric and polymeric forms are in equilibrium. Glutaraldehyde may react with proteins by several means such as aldol condensation or Michael-type addition, and we show here 8 different reactions for various aqueous forms of this reagent. As a result of these discrepancies and the unique characteristics of each enzyme, crosslinking procedures using glutaraldehyde are largely developed through empirical observation. The choice of the enzyme-glutaraldehyde ratio, as well as their final concentration, is critical because insolubilization of the enzyme must result in minimal distortion of its structure in order to retain catalytic activity. The purpose of this paper is to give an overview of glutaraldehyde as a crosslinking reagent by describing its structure and chemical properties in aqueous solution in an attempt to explain its high reactivity toward proteins, particularly as applied to the production of insoluble enzymes.

Glutaraldehyde: behavior in aqueous solution, reaction with proteins, and application to enzyme crosslinking

Glutaraldehyde possesses unique characteristics that render it one of the most effective protein crosslinking reagents. It can be present in at least 13 different forms depending on solution conditions such as pH, concentration, temperature, etc. Substantial literature is found concerning the use of glutaraldehyde for protein immobilization, yet there is no agreement about the main reactive species that participates in the crosslinking process because monomeric and polymeric forms are in equilibrium. Glutaraldehyde may react with proteins by several means such as aldol condensation or Michael-type addition, and we show here 8 different reactions for various aqueous forms of this reagent. As a result of these discrepancies and the unique characteristics of each enzyme, crosslinking procedures using glutaraldehyde are largely developed through empirical observation. The choice of the enzyme-glutaraldehyde ratio, as well as their final concentration, is critical because insolubilization of the enzyme must result in minimal distortion of its structure in order to retain catalytic activity. The purpose of this paper is to give an overview of glutaraldehyde as a crosslinking reagent by describing its structure and chemical properties in aqueous solution in an attempt to explain its high reactivity toward proteins, particularly as applied to the production of insoluble enzymes.

Comparison of two glutaraldehyde immobilization techniques for solid-phase tryptic peptide mapping of human hemoglobin by capillary zone electrophoresis and mass spectrometry

Stabilization of proteolytic enzymes, especially by immobilization, is of considerable interest because of their potential applications in medicine and the chemical and pharmaceutical industries. We report here a detailed comparison of two procedures for trypsin immobilization using the same homobifunctional agent, glutaraldehyde, for the purpose of peptide mapping. These methods include covalent coupling either to controlled pore glass (solid support) or via a cross-linking reaction (without any solid support). The immobilized trypsin preparations were characterized by the determination of immobilization efficiency, which ranged from 68 to > 95%, and measurement of apparent kinetic parameters toward a synthetic peptide-like substrate. Batch digestions of whole denaturated human normal adult hemoglobin (HbA) were performed to obtain peptide maps by capillary zone electrophoresis (CZE). Migration time reproducibility of the CZE maps was excellent, with a mean relative standard deviation of 1.5%. Moreover, the two immobilized enzyme preparations showed excellent reproducibility for repeated digestions. Matrix-assisted laser desorption/ionization (MALDI)-mass spectrometry was also used for peptide mass mapping of denaturated HbA digested using the two immobilized trypsin preparations. Even though the two immobilized trypsin preparations do not behave identically, similar sequence coverages of 57% and 61% (for the two HbA chains merged) were achieved for the support-based and cross-linked trypsin preparations, respectively.

A comparison between electrokinetic capillary chromatography and absorption spectroscopy for the analysis of peptide-micelle association by weak hydrophobic interactions

Micellar electrokinetic capillary chromatography (MEKC) was compared to absorption spectroscopy to estimate equilibrium association constans (K(as)) for peptide-micelle systems involving three peptides (leucine-enkephalin, methionine-enkephalin and leucine-phenylalanine (LF)) and two surfactant micelles (sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB)). Buffer pH was chosen to minimize purely electrostatic interactions between peptides and micelles that could not be interrogated by absorption spectroscopy. Viscosity-corrected MEKC mobilities gave reasonably similar estimates of K(as) between the two methods for all three peptide-SDS micelle systems, with K(as) values ranging from 13.7 +/- 0.3 to 49 +/- 1 M(-1). For CTAB, estimates of K(as) for LF-CTAB micelle association were of the same order of magnitude as the SDS micelle by the two methods of estimation. On the other hand, enkephalin-CTAB micelle binding was about 10 times stronger (K(as) = 122 +/- 3 M(-1) to 311 +/- 9 M(-1)) than the enkephalin-SDS micelle binding. In addition, MEKC underestimated the K(as) values relative to spectroscopy by a factor of 2-3 for the enkephalin-CTAB system.

Micellar electrokinetic chromatography separations of dynorphin peptide analogs

Prodynorphin is a precursor that has multiple cleavage sites to release various dynorphin opioid peptides. The dynorphin analogs used in this study have 18 amino acid residues. A series of dynorphin-like peptides, differing by a single residue (alanine substitution) were assembled by Fmoc solid-phase procedures and purified by preparative high performance liquid chromatography (HPLC). Separation of the Ala-scan dynorphin analogs was investigated by micellar electrokinetic chromatography (MEKC) employing anionic, cationic and zwitterionic surfactants. The role of electrostatic and hydrophobic forces in analyte-surfactant interactions is discussed with respect to the observed elution patterns. Separation of all dynorphin analogs by MEKC using a zwitterionic surfactant shows this technique to be powerful for separating closely related peptide species. It also demonstrates the potential for using MEKC for the prescreening of peptide libraries to determine their biological activity toward specific receptors. Results from the separation of dynorphin analogs by free solution and ion-pairing capillary electrophoresis are also presented.

Characterization of a solid-phase extraction device for discontinuous on-line preconcentration in capillary electrophoresis-based peptide mapping

Peptide mapping by capillary electrophoresis (CE) with UV detection is problematic for the characterization of proteins that can only be obtained at low micromolar concentrations. Dilution of peptide fragments during digestion of the protein can further reduce the detection sensitivity in peptide mapping to the point where analysis at sub-micromolar concentrations is not possible. A remedy to this problem is preconcentration (sample enrichment) of the proteolytic digest by solid-phase extraction (SPE). To minimize non-specific adsorptive losses during sample handling, on-line SPE-CE is preferred. However, packed-inlet SPE-CE is not always feasible due to either instrument or sample limitations. We describe here a simple method of preconcentration by discontinuous on-line SPE-CE, specifically applied to peptide mapping in low-pH separation buffer after protein digestion in a solid-phase enzyme microreactor. The SPE-CE system does not require application of a low pressure during electrophoretic separation to overcome reversed electroosmotic flow because the preconcentrator device is disconnected from the separation capillary before the electric field is applied. Up to a 500-fold preconcentration factor can be achieved with this device, which can be reused for many samples. Parameters such as the volume of desorption solution, the adsorption/desorption (chromatographic) process, reproducibility of packing the SPE preconcentrator and effects of sample concentration on the peptide map are investigated.

On-line solid-phase preconcentration for sensitivity enhancement in capillary electrophoresis

Capillary electrophoresis is attractive for the analysis of biological samples because only a few nanoliters of sample need to be injected. Indeed, optimal resolution is achieved when the injected volume is 1% or less of the total capillary volume. Unfortunately, this advantage leads to severe detection limitations compounded by the fact that many analytes in a biological sample are present at very low concentrations. To overcome the detection sensitivity limitations of CE, nonspecific, on-line preconcentration has been employed in a variety of applications. This technique is based on inserting a small quantity of reversed-phase material (e.g., C18 particles or membrane) near the inlet of the CE capillary for sample enrichment by solid-phase extraction. A detachable cartridge containing the solid phase is relatively simple to construct and permits the injection of large sample volumes (1-100 microL) into the capillary. Elution of adsorbed analyte in less than 100 nL of solvent permits a 100-1000 fold improvement in the effective concentration limit of detection, depending on the hydrophobicity of the compound. Detection of analytes present in complex mixtures at concentrations as low as 20 amol/microL has been reported when using an on-line preconcentration device in conjunction with CE-mass spectrometry. In this review, the potential merits of the technique are described and some examples of direct analysis of biological samples without rigorous off-line pretreatment are given.

Estimation of the pH-independent binding constants of alanylphenylalanine and leucylphenylalanine stereoisomers with beta-cyclodextrin in the presence of urea

The separation of stereoisomers, particularly enantiomers, is important when their physiological activity differs. We have resolved the four stereoisomers each of alanylphenylalanine (Ala-Phe) and of leucylphenylalanine (Leu-Phe) by capillary electrophoresis using beta-cyclodextrin as a buffer additive and urea to enhance its solubility. A study of the influence of pH and beta-cyclodextrin concentration on the separations showed that weak inclusion complexes were formed between the dipeptides and chiral selector. It was found that pH could alter the migration order of enantiomers L-Ala-L-Phe and D-Ala-D-Phe, as well as L-Leu-L-Phe and D-Leu-D-Phe; however, there was no change in order for the other pairs of optical isomers. Electrophoretic mobility data were used to estimate the acid dissociation constants of the dipeptide isomers at pH < 7 with no chiral selector present. By varying the concentration of beta-cyclodextrin, the chiral selector, the binding constants of Ala-Phe and Leu-Phe optical isomers in their fully protonated and zwitterionic forms were estimated. For the four Ala-Phe stereoisomers, K = 42-66 M(-1) and 4-41 M(-1) for the cationic and zwitterionic forms, respectively. For the four Leu-Phe stereoisomers, K = 43-94 M(-1) and 1-28 M(-1) for the cationic and zwitterionic forms, respectively.

Capillary electrophoresis with laser-induced native fluorescence detection for profiling body fluids

Laser-induced native fluorescence detection with a KrF excimer laser (lambda=248 nm) was used to investigate the capillary electrophoretic (CE) profiles of human urine, saliva and serum without the need for sample derivatization. All separations were carried out in sodium phosphate and/or sodium tetraborate buffers at alkaline pH in a 50-microm I.D. capillary. Sodium dodecyl sulfate was added to the buffer for micellar electrokinetic chromatography (MEKC) analysis of human urine. Although inherently a pulsed source, the KrF excimer laser was operated at a high pulse repetition rate of 553, 1001 or 2009 Hz to simulate a continuous wave excitation source. Detection limits were found to vary with pulse rate, as expected, in proportion to average excitation power. The following detection limits (3sigma) were determined in free solution CE: tryptophan, 4 nM; conalbumin, 10 nM; alpha-lactalbumin, 30 nM. Detection limits for indole-based compounds and catecholamine urinary metabolites under MEKC separation conditions were in the range 7-170 nM.

Micellar electrokinetic chromatographic study of the interaction between enkephalin peptide analogs and charged micelles

The relative hydrophobicity/hydrophilicity of the pentapeptides leucine enkephalin (LE), methionine enkephalin (ME) and five analogs, differing in their uncharged side chain and/or chirality, was investigated by micellar electrokinetic capillary chromatography (MEKC) employing anionic and cationic surfactants. The effect of sodium dodecyl sulfate (SDS) concentration on peptide mobility was studied at pH 8.8, a value that is well above the peptide isoelectric point, to minimize electrostatic interaction with the anionic micelles. Similarly, the effect of cetyltrimethylammonium bromide (CTAB) cationic micelles on peptide migration was studied at pH 4.1. The migration order from MEKC experiments was compared to the peptide hydrophobicity calculated from reversed-phase HPLC-derived hydrophobicity coefficients. Although relative peptide hydrophobicity was, in general, positively correlated with effective electrophoretic mobility, a tryptophan-containing analog showed only weak interaction with micelles compared to the less hydrophobic peptides. The enkephalins studied were zwitterionic in character from pH 3 to 8, and their migration as a function of pH under MEKC conditions demonstrated that electrostatic forces were at least as important as hydrophobic interactions in pentapeptide-micelle complexation.

Investigation of a pulsed-laser thermo-optical absorbance detector for the determination of food preservatives separated by capillary electrophoresis

Thermo-optical absorbance (TOA) detection using a KrF excimer waveguide laser for detection of benzoic acid, dehydroacetic acid and sorbic acid separated by capillary electrophoresis (CE) was studied. Detection limits were, on average, ten times better than those for on-column UV absorbance methods with CE, and two or more times better than those for UV absorbance with HPLC. The influence of increased laser power on TOA detection sensitivity was found to be strong for benzoic and dehydroacetic acids but quite weak for sorbic acid. It was discovered that photoisomerization of sorbic acid (2,4-hexadienoic acid) occurred readily in the detection volume at moderate laser powers (P(ave) = 3 mW) and increased with slow electroosmotic flows (< 6 cm/min). The TOA method described here shows improved detection sensitivity for CE analyses of compounds having only weak absorptivities (< 5% of maximum) at lambda = 248 nm, and thus demonstrates its utility for determination of a variety of analytes in a single separation.

Micellar capillary electrophoresis separation and thermo-optical absorbance detection of products from manual peptide sequencing

Micellar capillary electrophoresis is optimized for separation of phenylthiohydantoin (PTH) amino acids produced in manual Edman degradation reaction for protein sequencing. There are also two major side-products produced by the Edman degradation reaction: diphenylthiourea and dimethylphenylthiourea. We report the complete separation of 19 PTH amino acids plus the two major side-reaction products in 10 min. Capillary electrophoresis is used to identify the five residues generated by manual Edman degradation sequencing of a pentapeptide.

Attachment of a single fluorescent label to peptides for determination by capillary zone electrophoresis

Complicated electropherograms are produced in the separation of fluorescently labeled peptides. Incomplete labeling of epsilon-amino groups on lysine residues results in the production of 2n-1 reaction products, where n is the number of alpha and epsilon amino groups in the peptide. A single label is attached to the peptide by first taking the peptide through one cycle of the Edman degradation reaction. All epsilon-amino groups are converted to the phenyl thiocarbamyl and the cleavage step exposes one alpha-amino group at the N-terminus of the peptide; the fluorescent label is attached to the N-terminus.

Capillary zone electrophoresis separation and laser-based detection of both fluorescein thiohydantoin and dimethylaminoazobenzene thiohydantoin derivatives of amino acids

Capillary zone electrophoresis is employed for the separation and analysis of both fluorescein thiohydantoin and dimethylaminoazobenzene thiohydantoin derivatives of amino acids. Detection of minute amounts of these amino acid derivatives is an important milestone in the development of a high sensitivity protein sequencer. Current detection limits for the fluorescein derivative is on the order of 10(-21) moles whereas detection limits for the dimethylaminoazobenzene derivative is on the order of 10(-16) moles.