Hollow CoP/carbon as an efficient catalyst for the peroxymonosulfate activation derived from phytic acid assisted metal-organic framework

The catalyst's composition and rationally designed structure is significantly interlinked with its performance for wastewater remediation. Here, a novel hollow cobalt phosphides/carbon (HCoP/C) as an efficient catalyst for activating peroxymonosulfate (PMS) was prepared. The ZIF-67 was synthesized first, followed by phytic acid (PA) etching and then heat treatment was used to get HCoP/C. The PA was used as an etching agent and a source of phosphorus to prepare HCoP/C. To analyze catalytic performance, another solid cobalt phosphides/carbon (SCoP/C) catalyst was prepared for comparison. In contrast to SCoP/C, the HCoP/C exhibited higher catalytic efficiency when used to activate PMS to degrade Bisphenol A (BPA). The results showed that about 98 % of targeted pollutant BPA was removed from the system in 6 min with a rate constant of 0.78 min-1, which was 4 times higher than the solid structure catalyst. The higher catalytic performance of HCoP/C is attributed to its hollow structure. In the study, other parameters such as BPA concentration, temperature, pH, and different catalyst amount were also tested. Moreover, the electron paramagnetic resonance (EPR) and radical quenching analysis confirmed that sulfate radicals were dominant in the HCoP/C/PMS system.

TiO2/C coated Co3O4 nanocages for peroxymonosulfate activation towards efficient degradation of organic pollutants

Developing new catalysts for efficient degradation of micropollutants in water is of significant importance in advanced oxidation processes (AOPs). Herein, TiO₂/C coated Co₃O₄ nanocages (Co₃O₄@TiO₂/C) were synthesized and their performance on micropollutants degradation was evaluated. Specifically, cobalt-based Zeolitic imidazolate framework (ZIF-67) coated by a thin layer of titanium species and polydopamine (PDA) was used as a precursor for the preparation of Co₃O₄@TiO₂/C by two-step calcination. The catalytic performance of peroxymonosulfate (PMS) activation towards the degradation of organic pollutants was investigated by using atrazine (ATZ) and Bisphenol A (BPA) as typical micropollutants. The efficiency and the effect of TiO₂/C shell on the as-synthesized catalyst were analyzed by comparing Co₃O₄ derived from ZIF-67 and Co₃O₄/C derived from ZIF-67/PDA. ATZ degradation results showed that the Co₃O₄@TiO₂/C catalyst was the most efficient for catalytic oxidation when 99.5% of ATZ was removed within 4 min, which is 57.5% and 74.6% faster than that of Co₃O₄@C and Co₃O₄, respectively. The enhanced performance of Co₃O₄@TiO₂/C is attributed to their unique nanocages structure and improved specific surface area. The catalysis mechanisms and ATZ degradation pathways were presented based on the results of electron paramagnetic resonance (EPR), XPS, and LC-MS analysis. Our results might have added to the design of heterogeneous catalysts of large surface area for efficient PMS activation in AOPs.

Mechanism of peroxymonosulfate activation and the utilization efficiency using hollow (Co, Mn)3O4 nanoreactor as an efficient catalyst for degradation of organic pollutants

Development of efficient catalysts for peroxymonosulfate (PMS) activation and further understanding its mechanism on organic pollutants degradation is of significant importance for advanced oxidation processes (AOPs). Herein, hollow (Co, Mn)₃O₄ catalysts were synthesized by calcination of Co, Mn containing metal-organic frameworks (MOFs) and further used to evaluate the effectiveness of organic pollutants (Bisphenol A (BPA), atrazine (ATZ), and diethyl phthalate (DEP)) degradation by PMS activation. The PMS utilization efficiency in (Co, Mn)₃O₄/PMS system (36.4%) was estimated to be 28.0% and 43.8% higher than that of Co₃O₄/PMS and Mn₅O₈/PMS system, respectively. Notably, the metal leaching in (Co, Mn)₃O₄/PMS system was significantly suppressed. The utilization efficiency also reveals an inverse proportionality relationship with BPA mineralization but decreases with increasing initial pH value. A synergy between oxides of Co and Mn was perceived to enhance PMS utilization efficiency and BPA degradation. The results indicate enhanced catalytic performance with (Co, Mn)₃O₄ compared to Co₃O₄ derived from Co-MOF and other reported catalysts, with 99% of BPA degradation within 4 min. The oxidation mechanism was then proposed based on the electron paramagnetic resonance (EPR) and XPS results. Our findings might have contributed to designing heterogeneous catalysts for efficient PMS utilization in AOPs.

Core-Shell Prussian Blue Analogs with Compositional Heterogeneity and Open Cages for Oxygen Evolution Reaction

Here, a reduction-cation exchange (RCE) strategy is proposed for synthesizing Fe-Co based bimetallic Prussian blue analogs (PBAs) with heterogeneous composition distribution and open cage nanocage architecture. Specially, bivalent cobalt is introduced into a potassium ferricyanide solution containing hydrochloric acid and polyvinyl pyrrolidone. The uniform PBAs with opened cages are formed tardily after hydrothermal reaction. Time-dependent evolution characterization on composition elucidating the RCE mechanism is based on the sequential reduction of ferric iron and cation exchange reaction between divalent iron and cobalt. The PBA structures are confirmed by electron tomography technology, and the heterogeneous element distribution is verified by energy-dispersive X-ray spectroscopy elemental analysis, leading to the formation of core-shell PBAs with compositional heterogeneity (Fe rich shell and Co rich core) and open cage architecture. When the PBA catalysts are used to boost the oxygen evolution reaction (OER), superior OER activity and long-term stability (low overpotential of 271 mV at 10 mA cm-2 and ≈5.3% potential increase for 24 h) are achieved, which is attributed to the unique compositional and structural properties as well as high special surface areas (576.2 m2 g-1). The strategies offer insights for developing PBAs with compositional and structural multiplicity, which encourages more practical catalytic applications.

Singlet oxygen-dominated non-radical oxidation process for efficient degradation of bisphenol A under high salinity condition

The degradation of organic contaminants under high salinity condition is still a challenge for environmental remediation due to the inhibiting effect resulted from the side reactions between radicals and anions. Here, we demonstrate the non-radical oxidation process via peroxymonosulfate (PMS) activation by metal-free carbon catalyst for efficiently decomposing bisphenol A (BPA) in saline water. The nitrogen-doped graphitic carbon (NGC700) exhibits excellent catalytic activity for depredating BPA at acid and neutral pH. Based on the scavenger experiments and electron paramagnetic resonance (EPR) analyses, the mechanism of catalytic oxidation was elucidated as the non-radical pathway, and singlet oxygen was identified as the primary reactive species. Experiments on the influence of anions (5-500 mM) further show that the inhibiting effect was overcame due to the non-radical process. Interestingly, Cl^- markedly facilitated the catalytic performance by generating HOCl in the catalytic process. The results highlight leveraging the non-radical pathway dominated by singlet oxygen to conquer the inhibitory effect of anions in NGC700/PMS system, which represents a crucial step towards environmental remediation under high salinity condition.

Removal of reactive blue 19 dye by sono, photo and sonophotocatalytic oxidation using visible light

An efficient sonophotocatalytic degradation of reactive blue 19 (RB 19) dye was successfully carried out using sulfur-doped TiO2 (S-TiO2) nanoparticles. The effect of various treatment processes that is sonolysis, photolysis, catalysis, sonocatalysis, photocatalysis, and sonophotocatalysis were investigated for RB 19 removal. S-TiO2 were synthesized in 1, 3 and 5 wt.% of sulfur by sol-gel process and characterized by X-ray diffraction (XRD) and scanning electron microscopy coupled with energy dispersive X-ray (SEM-EDX), UV-Visible diffuse reflectance spectra (DRS). The results confirm anatase phase of TiO2, porous agglomerate structure, and a red shift in the absorbance spectra of S-TiO2. The dye degradation was studied by using UV-Vis spectrophotometer at λ max=594 nm. The reaction parameters such as pH, catalyst dosage, initial dye concentration, ultrasonic power and effect of sulfur doping in different weight percent were studied to find out the optimum degradation conditions. Optimum conditions were found as: S-TiO2=5 wt.%, catalyst (S-TiO2 5 wt.%)=50mg, RB 19 solution concentration=20 mg L(-1), pH=3, ultrasound power=100 and operating temperature=25°C. The response of 5 wt.% S-TiO2 was found better than 1 and 3 wt.% S-TiO2 and other forms TiO2. The sonophotocatalysis process was superior to other methods. During this process the ultrasound cavitation and photocatalysis water splitting takes place which leads to the generation of OH. As reveled by the GCMS results the reactive blue 19 (20 mg L(-1)) was degraded to 90% within 120 min. The S-TiO2 sonophotocatalysis system was studied for the first time for dye degradation and was found practicable, efficient and cost effective for the degradation of complex and resistant dyes such as RB19.