Design, synthesis and biological evaluation of 2-pyrrolone derivatives as radioprotectors

It is known that p53 is an important transcription factor and plays a central role in ionizing radiation (IR)-induced DNA damage responses such as cell cycle arrest, DNA repair and apoptosis. We previously reported that regulating p53 protein is an effective strategy for modulating cell fate by reducing the acute side effects of radiation therapy. Herein, we report on the discovery of STK160830 as a new radioprotector from a chemical library at The University of Tokyo and the design, synthesis and biological evaluation of its derivatives. The radioprotective activity of STK160830 itself and its derivatives that were synthesized in this work was evaluated using a leukemia cell line, MOLT-4 cells as a model of normal cells that express the p53 protein in a structure-activity relationships (SAR) study. The experimental results suggest that a direct relationship exists between the inhibitory effect of these STK160830 derivatives on the expression level of p53 and their radioprotective activity and that the suppression of p53 by STK160830 derivatives contribute to protecting MOLT-4 cells from apoptosis that is induced by exposure to radiation.

A Novel RNA Synthesis Inhibitor, STK160830, Has Negligible DNA-Intercalating Activity for Triggering A p53 Response, and Can Inhibit p53-Dependent Apoptosis

RNA synthesis inhibitors and protein synthesis inhibitors are useful for investigating whether biological events with unknown mechanisms require transcription or translation; however, the dependence of RNA synthesis has been difficult to verify because many RNA synthesis inhibitors cause adverse events that trigger a p53 response. In this study, we screened a library containing 9600 core compounds and obtained STK160830 that shows anti-apoptotic effects in irradiated wild-type-p53-bearing human T-cell leukemia MOLT-4 cells and murine thymocytes. In many of the p53-impaired cells and p53-knockdown cells tested, STK160830 did not show a remarkable anti-apoptotic effect, suggesting that the anti-apoptotic activity is p53-dependent. In the expression analysis of p53, p53-target gene products, and reference proteins by immunoblotting, STK160830 down-regulated the expression of many of the proteins examined, and the downregulation correlated strongly with its inhibitory effect on cell death. mRNA expression analyses by qPCR and nascent RNA capture kit revealed that STK160830 showed a decreased mRNA expression, which was similar to that induced by the RNA synthesis inhibitor actinomycin D but differed to some extent. Furthermore, unlike other RNA synthesis inhibitors such as actinomycin D, p53 accumulation by STK160830 alone was negligible, and a DNA melting-curve analysis showed very weak DNA-intercalating activity, indicating that STK160830 is a useful inhibitor for RNA synthesis without triggering p53-mediated damage responses.

Role of the Water Gradient Structure in Inhibiting Thin Aqueous Layer Break in Silicone Hydrogel-Soft Contact Lens

Purpose

Soft contact lenses (SCLs) are effective for refractive error correction, but prolonged wear triggers discomfort and discontinuation. This study investigates whether water gradient technology of delefilcon A-based SCLs improve tear film dynamics.

Methods

This retrospective observational study included 50 asymptomatic delefilcon A or narafilcon A users. Data on thin aqueous layer break (TALB; %), noninvasive tear break-up time (NIBUT), tear meniscus height (TMH; mm), subjective dryness, and higher-order aberrations (HOAs) were collected. Measurements of the bare eye, the SCL-worn eye after 15 minutes (visit 1 [v1]) and 30 ± 5 days after v1 after SCL was worn for ≥5 hours (visit 2 [v2]) were recorded.

Results

TALB was significantly reduced in the delefilcon A group compared to the narafilcon A group (33.3% vs. 85.5% at v1; P < 0.0001 and 31.7% vs. 80.4% at v2; P < 0.0001). The NIBUT was also significantly higher in the former (4.2 ± 2.1 seconds vs. 2.9 ± 1.5 at v1; P < 0.01 and 4.1 ± 2.3 seconds vs. 2.7 ± 1.6 seconds at v2; P < 0.01) across both visits. The TMH was significantly reduced in the former in both v1 and v2. The total ocular HOAs were significantly lower in the former at v1 (P < 0.001) and v2 (P < 0.05) compared to the bare eye.

Conclusions

The water gradient technology of delefilcon A reduces TALB and increases NIBUT.

Translational Relevance

The use of water gradient technology improves tear film dynamics and alleviate pathological break-up pattern, improving lens performance.

Evaluation of sodium orthovanadate as a radioprotective agent under total-body irradiation and partial-body irradiation conditions in mice

PURPOSE

Our previous study indicated that sodium orthovanadate (vanadate), a strong inhibitor of p53, effectively suppressed the lethality from the hematopoietic (HP) and gastrointestinal (GI) syndromes after 12 Gy total-body irradiation (TBI) in mice. This conclusion, however, was inconsistent with the fact that p53 plays a radioprotective role in the intestinal epithelium. The death after TBI of around 12 Gy was attributed to a combined effect of HP and GI syndromes. To verify the effect from prophylactic administration of p53 inhibitor on protection of HP and GI syndromes, in this study, the radioprotective effects from vanadate were investigated in TBI and lower half-body irradiation (partial-body irradiation: PBI) mouse models.

METHODS

Female ICR mice were given a single injection of vanadate or vehicle, followed by a lethal dose of TBI or PBI. Radioprotective effects of vanadate against the irradiations were evaluated by analyzing survival rate, body weight, hematopoietic parameters, and histological changes in the bone marrow and intestinal epithelium.

RESULTS

TBI-induced HP syndrome was effectively suppressed by vanadate treatment. After TBI, the vanadate-treated mice retained better bone marrow cellularity and showed markedly higher survival rate compared to the vehicle-treated animals. In contrast, vanadate did not relieve loss of intestinal crypts and failed to rescue mice from GI death after PBI.

CONCLUSION

Vanadate is a p53 inhibitor that has been shown to be beneficial as a radiation protective agent against HP but was not effective in protecting against acute GI radiation injury.

Protective Effects of p53 Regulatory Agents Against High-LET Radiation-Induced Injury in Mice

Radiation damage to normal tissues is one of the most serious concerns in radiation therapy, and the tolerance dose of the normal tissues limits the therapeutic dose to the patients. p53 is well known as a transcription factor closely associated with radiation-induced cell death. We recently demonstrated the protective effects of several p53 regulatory agents against low-LET X- or γ-ray-induced damage. Although it was reported that high-LET heavy ion radiation (>85 keV/μm) could cause p53-independent cell death in some cancer cell lines, whether there is any radioprotective effect of the p53 regulatory agents against the high-LET radiation injury in vivo is still unclear. In the present study, we verified the efficacy of these agents on bone marrow and intestinal damages induced by high-LET heavy-ion irradiation in mice. We used a carbon-beam (14 keV/μm) that was shown to induce a p53-dependent effect and an iron-beam (189 keV/μm) that was shown to induce a p53-independent effect in a previous study. Vanadate significantly improved 60-day survival rate in mice treated with total-body carbon-ion (p < 0.0001) or iron-ion (p < 0.05) irradiation, indicating its effective protection of the hematopoietic system from radiation injury after high-LET irradiation over 85 keV/μm. 5CHQ also significantly increased the survival rate after abdominal carbon-ion (p < 0.02), but not iron-ion irradiation, suggesting the moderate relief of the intestinal damage. These results demonstrated the effectiveness of p53 regulators on acute radiation syndrome induced by high-LET radiation.

Lacrimal drainage function after cheese wiring of lacrimal passage intubation

PURPOSE

To investigate how cheese wiring affects lacrimal drainage function by quantitative assessment of tear function and punctal dimensions.

METHODS

Patients who underwent lacrimal passage intubation between January 2017 and September 2018 were enrolled prospectively. Among these patients, those with postoperative cheese wiring who received lacrimal passage intubation in one eye met the criteria for further investigation. The subjective symptoms of epiphora, dimensions of puncta, lower tear meniscus, and tear clearance were assessed postoperatively in both the involved eye and untreated contralateral eye. Punctum dimensions were analysed using the digital slit-lamp image. Tear meniscus and tear clearance were assessed by anterior segment optical coherence tomography.

RESULTS

Postoperative cheese wiring was observed in 68 of 314 eyes. Among these cases, 36 patients (age 70.5 ± 11.7 years) had cheese wiring only in one eye: with the involvement of both puncta in 15 patients (group A) and only the lower punctum in 21 patients (group B). There was no patient with the involvement of only the upper punctum. While tear function of the involved eyes in group B did not differ from that of the untreated eye, it was significantly decreased in group A compared with that in untreated control eyes (p < 0.05). The tear clearance rate correlated significantly with the upper punctum dimensions (p < 0.05), but not with the lower punctum.

CONCLUSION

Analysis of cheese wiring after lacrimal passage intubation with tear function demonstrated that the integrity of the puncta and the canaliculus is important for lacrimal drainage.

Development of p53-targeting drugs that increase radioresistance in normal tissues

Radiation damage to normal tissues is a serious concern in radiation therapy. Advances in radiotherapeutic technology have improved the dose distribution of the target volumes and risk organs, but damage to risk organs that are located within the irradiation field still limits the allowable prescription dose. To overcome this dose-limiting toxicity, and to further improve the efficacy of radiotherapy, the development of drugs that protect normal tissues but not cancer tissues from the effects of radiation are expected to be developed based on molecular target-based drugs. p53 is a well-known transcription factor that is closely associated with radiation-induced cell death. In radiation-injured tissues, p53 induces apoptosis in hematopoietic lineages, whereas it plays a radioprotective role in the gastrointestinal epithelium. These facts suggest that p53 inhibitor would be effective for radioprotection of the hematopoietic system, and that a drug that upregulates the radioprotective functions of p53 would enhance the radioresistance of gastrointestinal tissues. In this review, we summarize recent progress regarding the prevention of radiation injury by regulating p53 and provide new strategic insights into the development of radioprotectors in radiotherapy. J. Med. Invest. 66 : 219-223, August, 2019.

P599Native T1 mapping is useful for detection of myocardial fibrosis in cases with ischemic and non-ischemic myocardial diseases

Background

Evaluation of myocardial fibrosis (MF) as late gadolinium enhancement (LGE) on MRI is useful for differential diagnosis of various myocardial diseases and prediction of future adverse cardiac events in some specific myocardial diseases. Gadolinium contrast is contraindicated for cases with severe renal dysfunction, therefore non contrast MRI is necessary for detection of MF in cases with both myocardial disease and severe renal dysfunction.

Purpose

We aimed to evaluate diagnostic accuracy of native T1 mapping for detection of MF compared with LGE in cases with various myocardial diseases, including ischemic and non-ischemic myocardial diseases.

Methods

We selected consecutive 40 patients who were suspected of having various myocardial diseases and underwent cardiac MRI, using 1.5T MRI (Ingenia, Philips) in 10 cases (25%) or 3T MRI (Ingenia, Philips) in 30 cases (75%), including native T1 mapping (without contrast) and LGE using contrast media from Jan 2018 to Feb 2019 in our institution. We evaluated diagnostic accuracy for detection of MF in left ventricular myocardium (LVM) of native T1 mapping image compared with LGE as the gold standard, in a patient-based and segment-based analysis. In T1 mapping images, segmental high T1 lesions were defined as MF. In a segment-based analysis, MF was evaluated using 17 LVM segments model in American Heart Association.

Results

MF was detected in 139 LVM segments in 25 (63%) cases. Sensitivity, specificity, positive predictive value, negative predictive value and diagnostic accuracy of native T1 mapping for detection of MF were 90%, 89%, 95%, 80% and 90% in a patient-based analysis, and 63%, 96%, 84%, 89% and 88% in a segment-based analysis (left figure). Native T1-values of LVM with MF were significantly higher than LVM without LGE (1351±79 vs 1093±124 in 1.5T and 1562±131 vs 1291±43 in 3T) (p<0.05 and p<0.01). Interobserver agreement of native T1 mapping and LGE were not significantly different (0.88 and 0.89, P=0.70). Overall diagnostic accuracy of native T1 mapping for detection of MF in a patient-based analysis, was not significantly different in between the cases with ischemic (n=18) and non-ischemic (n=22) myocardial disease (90% and 83.3%, P=0.10).

Conclusion

Native T1 mapping (without contrast) is useful for detection of MF in various myocardial diseases and high diagnostic accuracy is expected especially in a patient-based analysis.

P6182Combination of a new iterative reconstruction technique with low tube voltage and high tube current has important role of detection of late enhancement on 320 slice CT

Background

New iterative reconstruction tecniques, including Adaptive Iterative Dose Reduction 3D (AIDR 3D) and Forward Projected Model-based Iterative Reconstruction SoluTion (FIRST), have been recently available on new generation 320 slice CT, and they can provide high-quality CT images.

Purpose

The aim of this study was to evaluate the diagnostic performance of detection of abnormal late enhancement (LE) in left ventricular (LV) myocardium (LVM) using 320-slice CT with new iterative reconstruction techiniques, AIDR 3D (Figure A) and FIRST (Figure B).

Methods

A total of 100 patients who were suspected of having various myocardial diseases and underwent late phase acquisition both on cardiac CT and CMR within 3 months were analyzed. The first 50 consecutive patients (Group 1) underwent 320-slice CT with AIDR 3D, 120 Kv tube voltage, 519±71 mA tube current. The next 50 consecutive patients (Group 2) underwent 320-slice CT with FIRST, 80 or 100Kv tube voltage, 803±20 mA tube current. We compared diagnostic accuracy of CT for detection of LE in LVM against that of CMR (the gold standard) in between the 2 groups.

Results

On patient-by-patient analysis, sensitivity, specificity, positive (PPV) and negative predictive values (NPV), and overall accuracy for detection of LE on CT vs CMR were 87, 95, 96, 82, and 90% in Group 1, and 97, 83, 91, 88, and 90% in Group 2. There were no significant difference of diagnostic accuracy on patient-by-patient analysis in between the 2 groups (Figure C). However, on a segment-by-segment analysis (using 17 American Heart Association LV segment model), these values for detection of LE on CT vs CMR were 60, 95, 73, 91, and 88% in Group 1, and 85, 95, 86, 95, and 93% in Group 2. Sensitivity, PPV, NPV and overall accuracy were significantly higher in Group 2 than in Group 1 (all P<0.01) (Figure D).

Conclusions

Diagnostic accuracy of detection of LE in LVM on CT combining low tube voltage and high tube current acquisition on a new generation 320-slice CT with FIRST was superior to 320-slice CT with AIDR 3D.

Acknowledgement/Funding

TSUCHIYA MEMORIAL MEDICAL FOUNDATION

Quality of Vision in Eyes With Epiphora Undergoing Lacrimal Passage Intubation

PURPOSE

To investigate visual function and optical quality in eyes with epiphora undergoing lacrimal passage intubation.

DESIGN

Prospective case series.

METHODS

Thirty-four eyes of 30 patients with lacrimal passage obstruction were enrolled. Before and 1 month after lacrimal passage intubation, functional visual acuity (FVA), higher-order aberrations (HOAs), lower tear meniscus, and tear clearance were assessed. An FVA measurement system was used to examine changes in continuous visual acuity (VA) over time, and visual function parameters such as FVA, visual maintenance ratio, and blink frequency were obtained. Sequential ocular HOAs were measured for 10 seconds after the blink using a wavefront sensor. Aberration data were analyzed in the central 4 mm for coma-like, spherical-like, and total HOAs. Fluctuation and stability indices of the total HOAs over time were calculated. Lower tear meniscus was assessed by anterior segment optical coherence tomography.

RESULTS

After lacrimal passage intubation, visual function significantly improved, as indicated by improved FVA (P = .003) and visual maintenance ratio (P < .001). Blink frequency decreased significantly after treatment (P = .01). Optical quality significantly improved, as indicated by a decrease in coma-like aberrations (P = .003), spherical-like aberrations (P = .018), and total HOAs (P = .001). Stability index increased (P < .001) and fluctuation index decreased (P = .019), and tear meniscus dimension decreased (P < .001).

CONCLUSIONS

Lacrimal passage intubation for eyes with epiphora significantly improved visual function and optical quality via patency of the lacrimal passage.

Abstract P6-12-04: Delayed hospital visits in patients with breast cancer after the great East Japan earthquake and the subsequent Fukushima Daiichi nuclear power plant accident: A retrospective comparative analysis

Introduction

In breast cancer, delay in first presentation and self-interruption of continuous treatment are associated with lower survival. It has been suggested that risk factors for such behavioral patterns include poor social support.

Minamisoma City, located within a 30 kilometers radius from Fukushima Daiichi nuclear power plant, has experienced rapid change in social structures following the Great East Japan Earthquake and the subsequent power plant accident. There has been a mass evacuation among young and middle-aged generations for fear of potential irradiation, and this has resulted in the separation of families and friends. These changes may have resulted in a deterioration of social support for residents, which could consequently lead to changed patterns of behavior in diseases such as breast cancer.

Objectives

This study compared the behavioral patterns before and after the disasters in patients with breast cancer in Minamisoma City.

Methods

We retrospectively analyzed data from patients with breast cancer who were diagnosed from January 2008 through March 2015 in the two main cancer centers in Minamisoma City. Demographic and clinical information was extracted from medical records, including age, stage, pathological findings, treatment, and the reason for the first hospital visit. The main outcome was a change of interval from the appearance of initial symptoms to the first hospital visit before and after the disasters. We also assessed whether continuous follow-up was maintained after the disasters. We used an unpaired t-test for numerical variables and a chi-squared test for categorical variables.

Results

A total of 102 and 97 patients were diagnosed with breast cancer before and after the disasters, respectively. There were no statistically significant differences between the 2 groups concerning average age (61 years old vs. 61 years old, p=1), stage 3 or 4 cancer (18% vs. 17%, p=0.81), invasive cancer (92% vs. 93%, p=0.87) and symptomatic patients (75% vs. 74%, p=0.74), respectively. However, after the disasters, there were significant increases in the ratio of patients with more than a one-year delay from the appearance of the initial symptom to the first hospital visit (5.4% vs. 15%, p&lt;0.05). The patients with more than a one-year delay had a significantly higher ratio of advanced stage cancer compared with patients who visited a hospital earlier. Continuous follow-up was maintained in all patients diagnosed after the disasters.

Discussion

The characteristics of patients were not significantly different before and after the disasters, while the ratio of patients with more than a one-year delay of the first hospital visit significantly increased after the disasters. Although information on social capital and other sociodemographic factors was not available, we speculate that poor social support due to changed social structures after the disasters might contribute to delay in first presentation in symptomatic breast cancer patients. Further study is warranted to clarify the factors associated with delayed hospital visits, in order to establish effective health interventions in the aftermath of mass disasters.

Citation Format: Ozaki A, Tsubokura M, Nomura S, Morita T, Ochi S, Kato S, Saji S, Yokota T, Leppold C, Tanimoto T, Kami M, Tsukada M, Ohira H. Delayed hospital visits in patients with breast cancer after the great East Japan earthquake and the subsequent Fukushima Daiichi nuclear power plant accident: A retrospective comparative analysis. [abstract]. In: Proceedings of the Thirty-Eighth Annual CTRC-AACR San Antonio Breast Cancer Symposium: 2015 Dec 8-12; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2016;76(4 Suppl):Abstract nr P6-12-04.

Missense variants of the alanine: glyoxylate aminotransferase 2 gene correlated with carotid atherosclerosis in the Japanese population

Alanine:glyoxylate aminotransferase 2 (AGXT2; EC 2.6.1.44) degrades asymmetric dimethylarginine (ADMA), a competitive inhibitor of nitric oxide (NO) synthase. Increased ADMA, reduced NO, and hypertension are shown in Agxt2 knockout mice. There are four single nucleotide polymorphisms (rs37370, rs37369, rs180749, and rs16899974) with which AGXT2 activity changes in humans and may be related to vulnerability of vascular sclerosis. To examine the relationship between them, we studied the functional haplotypes of the AGXT2 gene and decided their relationship with arteriosclerotic changes via carotid intima-media thickness (carotid IMT) in Japanese subjects. Genotyping of those polymorphisms and the carotid IMT in 1,426 Japanese subjects were then evaluated. Subjects with C-A-A-A haplotype (rs37370, rs37369, rs180749, rs16899974) showed low AGXT2 activity (P<0.0001; Pearson’s correlation coefficients: 0.497). The C-A-A-A haplotype was significantly associated with mean carotid IMT (P=0.049) and max carotid IMT (P=0.004). Subjects with two C-A-A-A haplotypes exhibited thicker mean carotid IMT (P=0.022) and maximum carotid IMT (P=0.001). In multiple regression analysis, subjects with two C-A-A-A haplotypes were independently and positively associated with mean carotid IMT (P=0.02) and maximum IMT (P=0.005) after correction. There was a significant correlation between the functional variants in the AGXT2 gene and carotid IMT in Japanese. The AGXT2 genotype may be an important factor underlying atherosclerosis.

Absorption, distribution and excretion of radioactivity by male rats after a single intravenous or subcutaneous dose of 14C-azacitidine

The absorption, distribution and excretion of radioactivity were investigated in male Sprague-Dawley rats after a single intravenous or subcutaneous dose of 14C-azacitidine. After subcutaneous administration, 14C-azacitidine was rapidly absorbed and the radioactivity was distributed to the tissues. The absorption of radioactivity after subcutaneous administration was 76.6% of that observed after intravenous administration. There were no marked differences in the tissue distribution of the radioactivity between administration routes. The concentrations of radioactivity in most tissues, including the spleen and bone marrow, which are sites of action of azacitidine, were higher than those in the plasma. Particularly high concentrations of radioactivity were detected in the spleen, kidney and liver. The accumulation of radioactivity in blood cells increased from 0.5 to 48 h. The binding of azacitidine to serum protein was low at <9%, and the cumulative urinary and fecal excretion of radioactivity for 168 h after intravenous or subcutaneous administration was >95% of the administered dose, indicating that radioactivity did not accumulate in the tissues. The radioactivity was mainly excreted in the urine.

Extraction of nonylphenol and nonylphenol ethoxylates from sewage sludge using the pressurized fluid extraction method and the supercritical fluid extraction method

To establish endocrine disruptor (ED) monitoring and control methods for wastewater treatment plants, it is necessary to clarify the fate of EDs in each process of a sludge treatment system. However, the ED analysis method for sewage sludge containing large quantities of organic matters has not been established. So, a highly reliable analytical method that accurately measures EDs in sewage sludge must be developed. This paper reports on the results of applying the Pressurized Fluid Extraction (PFE) method and the Supercritical Fluid Extraction (SFE) method to the extraction of nonylphenol (NP) and nonylphenol ethoxylate (NPnEO) existence of which has often been confirmed in past surveys. To clarify the quantity of EDs in sludge specimens and the fate of EDs in the sludge treatment process, appropriate analytical methods should be developed. In this study, the PFE method and the SFE method were tested to extract NP and NPnEO from sewage sludge specimens. The findings indicate that the extraction from dried sludge by the PFE method can extract a larger quantity of NP and NPnEO in a shorter time than the widely used heating reflux method. Regarding the extraction by the SFE method, conditions for extraction of NP and NPnEO at a higher rate than the heating reflux method were not found.

Fate of nonylphenol and 17beta-estradiol contained in composted sewage sludge after land application

Many environmental problems caused by endocrine disrupters (EDs) have been reported. Because little is known about the fate of EDs accumulated in sewage sludge, we carried out a study to clarify the fate of EDs in composted sludge after its application to soil. Nonylphenol (NP) and 17beta-estradiol (E2) were measured for leachate and soil. High concentrations of NP and E2 were detected in the leachate at the early stage, but they decreased rapidly. Also, the high contents of NP and E2 in soil decreased significantly within 300 days. Because the decrease of NP and E2 in the soil was much larger than that of NP and E2 in the leachate, there must have been a physicochemical or biological decomposition mechanism in the soil layer. We also tried to clarify the transfer of NPs to plants from compost. In the experimental conditions of this study, the transfer of NPs to plants from compost was not observed.

Fate of nonylphenol polyethoxylates and nonylphenoxy acetic acids in an anaerobic digestion process for sewage sludge treatment

Many environmental problems caused by endocrine disruptors (EDs) have been reported. It is reported that EDs flow into sewage treatment plants, and it has been pointed out that these may be shifted from the wastewater treatment process to the sludge treatment process. Little is known about the fate of EDs accumulated in sewage sludge, so we carried out a study to clarify the fate of EDs in sewage sludge treatment processes, especially in an anaerobic digestion process. In this study, nonylphenol (NP) was selected as a target ED. Nonylphenol ethoxylates (NPnEO) or nonylphenoxy acetic acids (NPnEC), which were the precursor of NP, were added to an anaerobic digestion process, and mass balance was investigated. The following results were obtained from the anaerobic digestion experiments. (1) NP1EO was injected to an anaerobic digestion testing apparatus that was operated at a retention time of approximately 28 d and a temperature of 35 degrees C with thickened sludge sampled from an actual wastewater treatment plant. Approximately 40% of the injected NP1EO was converted to NP. (2) NP1EC was injected to an anaerobic digestion testing apparatus with thickened sludge. As a result, almost all injected NP1EC was converted to NP. When NP2EC was injected, NP2EC was not converted to NP until the 20th day.

Favorable outcomes with tacrolimus in two patients with refractory interstitial lung disease associated with polymyositis/dermatomyositis

Two cases of progressive interstitial lung disease associated with polymyositis/dermatomyositis are presented. Both patients were refractory to conventional therapy with high-dose corticosteroids, cyclosporine, and intermittent pulse cyclophosphamide, and thus a therapeutic trial of tacrolimus was instituted. Tacrolimus was markedly effective in achieving subjective, laboratory and radiographic improvement in both patients.

Clostridium perfringens epsilon-toxin increases permeability of single perfused microvessels of rat mesentery

Epsilon-toxin, the primary virulence factor of Clostridium perfringens type D, causes mortality in livestock, particularly sheep and goats, in which it induces an often-fatal enterotoxemia. It is believed to compromise the intestinal barrier and then enter the gut vasculature, from which it is carried systemically, causing widespread vascular endothelial damage and edema. Here we used single perfused venular microvessels in rat mesentery, which enabled direct observation of permeability properties of the in situ vascular wall during exposure to toxin. We determined the hydraulic conductivity (L(p)) of microvessels as a measure of the response to epsilon-toxin. We found that microvessels were highly sensitive to toxin. At 10 microg ml(-1) the L(p) increased irreversibly to more than 15 times the control value by 10 min. At 0.3 microg ml(-1) no increase in L(p) was observed for up to 90 min. The toxin-induced increase in L(p) was consistent with changes in ultrastructure of microvessels exposed to the toxin. Those microvessels exhibited gaps either between or through endothelial cells where perfusate had direct access to the basement membrane. Many endothelial cells appeared necrotic, highly attenuated, and with dense cytoplasm. We showed that epsilon-toxin, in a time- and dose-dependent manner, rapidly and irreversibly compromised the barrier function of venular microvessel endothelium. The results conformed to the hypothesis that epsilon-toxin interacts with vascular endothelial cells and increases the vessel wall permeability by direct damage of the endothelium.

Role of Women in Medicine: A Look at the History, the Present Condition and the Future Status of Women in the Surgical Field, Especially Neurosurgery

We have analyzed the historical background of women's progress in medicine in Japan and the role of female neurosurgeons as models for the next generation. Female neurosurgeons were asked to complete a questionnaire regarding their professional life in detail and the problems they are facing while managing their personal life after getting married and having a child. Some feel that there remain some constraints at work for being a female, due to their male colleagues who are not so understanding in nature. The younger generation is not so keen on joining the neurosurgical branch as their life career due to hard work and complete dedication demanded by neurosurgery. It is not easy for all to manage a neurosurgical career along together with a married life and children. Hence it is now time for those successful female neurosurgeons to become role models. Government can play an important role in these social reforms by coming up with programs to give social security to females and initiate programs for child care for married females pursuing such a demanding profession. Certain measures to encourage females to take up surgery are providing more time by arranging care for babies and families, flexibility in working hours, in addition to having a considerate husband and a considerate chief of department and senior staff. Departmental policies need to be completely impartial and should promote everyone based on their skills and knowledge. Women neurosurgeons need to get together and discuss all these issues so that the younger generation will not hesitate to take up this profession and become stalwarts of neurosurgery like their male counterparts.

A new implant designed to maximize contact with trabecular bone: survival to 18 months

PROBLEM

A roughened, commercially pure titanium (CP-Ti) implant design has been developed that features a different length and pitch for each screw thread to direct functional stresses away from cortical bone and to the more resilient trabecular bone. Abutment-implant connection is made using a conical taper to provide a seal against invasion by microorganisms.

PURPOSE

To assess short-term (18 months) clinical performance of this innovative implant design.

METHODS

A total of 1,419 implants were placed in 313 patients to support 419 prostheses in a multidisciplinary, multicentered, prospective clinical study conducted by the Ankylos Implant Clinical Research Group (AICRG). More than 100 dentists at 32 centers in the United States, 1 in Korea, and 1 in Taiwan are involved in the study. Failure was defined as implant removal for any reason. The influence of mobility at placement, implant length and diameter, incision type, augmentation, crestal bone reduction, bone density, and the use of the operating room or dental clinic on survival were evaluated over 18 months. Crestal bone loss between placement and uncovering was also determined.

RESULTS

Crestal bone loss ranged from 0.2 to 0.5 mm. The overall success rate from placement to 18 months was 96.6%. Implants mobile at placement failed more frequently (16.9%) compared with stable implants (3.1%). Wide-diameter implants and longer implants exhibited higher survival rates. Incision design and surgery location did not influence survival. Bone density was important to clinical survival.

A 48-month multicentric clinical investigation: implant design and survival

This report is based on a total of 2,955 implants of 6 different designs, randomized and placed in 829 patients and followed for 48 months. Implant failure was defined as nonintegration at uncovering or removal due to mobility, persistent pain, infection, and evidence of radiographic bone loss. Failures were reported for 3 phases of treatment: implant placement to uncovering (phase 1), uncovering to loading (phase 2), and postloading (phase 3). Differences in survival were compared with Kaplan-Meier survival curves. The maxillary single tooth application resulted in 95.2% survival for the hydroxyapatite-coated grooved implants. In the maxillary completely edentulous application, survival of hydroxyapatite grooved and screw implants were considerably better compared with the titanium screw implants. The hydroxyapatite-coated cylinder had better survival than the titanium basket and screw designs in the mandibular completely edentulous application. The hydroxyapatite-coated cylinder and grooved implants in the maxillary posterior partially edentulous application had similar survival rates. The survival of the hydroxyapatite-coated cylinder exceeded that of the titanium basket in mandibular posterior partially edentulous applications. Analyses by phase of treatment indicated a pattern of early failure for nonhydroxyapatite-coated implants compared with hydroxyapatite-coated implants. The implant with the highest survival at all phases of treatment was the hydroxyapatite-coated press-fit cylinder. Two hydroxyapatite-coated implant designs performed well in the challenging posterior maxillary region.

The ankylos endosseous dental implant: assessment of stability up to 18 months with the Periotest

Osseointegration is an ongoing histometric process that may vary during clinical function. The implant must be stable at uncovering, which reflects the status of bone-implant interface. The physiology of bone healing associated with endosseous implants suggests that this process occurs between 8 and 12 months, and Periotest values (PTVs) tend to reflect changes in the stability of the bone-implant interface. Stability generally increases gradually from the time of uncovering to an optimal PTV that occurs at a point close to 12 months. This stable interface must remain intact for long-term clinical survival. Rapid development of this optimal PTV is highly desirable in order to prevent premature overloading of the bone-implant interface. The Ankylos implant is a new screw-type implant design in which the thread pitch and length vary to maximize trabecular bone contact. The purpose of this report is to evaluate to 18 months the stability (PTVs) of this implant design. More than 457 implants were placed and followed for a period of 18 months by the multicentered, multidisciplinary Ankylos Implant Clinical Research Group (AICRG). Implant stability (PTVs) was assessed using the Periotest at abutment connection and at 3, 6, 9, 12, and 18 months after uncovering. The Periotest values for all implants rapidly reached an optimal status between uncovering (-3.1 PTVs) and 3 months (-3.4 PTVs). This rapid increase in stability has not previously been reported for other implant designs. The mandibular arch was more negative (-3.8 PTVs) at uncovering as compared with the PTVs for the maxillary arch (-1.7 PTVs). Negative PTVs were recorded (1) as length and diameter increased, (2) as bone density increased, (3) in certain jaw regions, (4) as the number of implants/case increased, and (5) for implants stabile at placement. The Ankylos screw implant design produced rapid stabilization 3 months after uncovering.

Role of tryptophan-1 in hemolytic and phospholipase C activities of Clostridium perfringens alpha-toxin

Replacement of the Trp-1 in Clostridium perfringens alpha-toxin with tyrosine caused no effect on hemolytic and phospholipase C (PLC) activities or on binding to the zinc ion, but that of the residue with alanine, glycine and histidine led to drastic decreases in these activities and a significant reduction in binding to the zinc ion. The hemolytic and PLC activities of W1H and W1A were significantly increased by the preincubation of these variant toxins with zinc ions, but the preincubation of W1G with the metal ion caused little effect on these activities. Gly-Ile-alpha-toxin, which contained an additional Gly-Ile linked to the N-terminal amino acid of alpha-toxin, did not show hemolytic activity, but showed about 6% PLC activity of the wild-type toxin. A mutant toxin, which contained an additional Gly-Ile linked to the N-terminus of a protein lacking 4 N-terminal residues of alpha-toxin, showed about 1 and 6% hemolytic and PLC activities of the wild-type toxin, respectively. Incubation of the mutant toxin with zinc ions caused a significant increase in PLC activity. These observations suggested that Trp-1 is not essential for toxin activity, but plays a role in binding to zinc ions.

Characterization of Bacteriocin N15 Produced by Enterococcus faecium N15 and Cloning of the Related Genes

Enterococcus faecium N15 was isolated from nuka (Japanese rice-bran paste), which is utilized as starter in the fermenting of vegetables, and was found to produce a bacteriocin that exhibited a broad spectrum of activity, including activity against Listeria monocytogenes and Bacillus circulans JCM2504. The bacteriocin was sensitive to proteases (alpha-chymotrypsin, proteinase K, trypsin, and pepsin) and alpha-amylase, but it was resistant to lipase. The bacteriocin was resistant to heat treatment at 100 degrees C for 2 h, but its activity was completely lost after autoclaving at 121 degrees C for 15 min. It was active over a wide pH range from 2.0 to 10.0. The bacteriocin showed bactericidal activity against Lactobacillus sake JCM1157 at a concentration of 40 AU/ml. Its molecular weight was estimated by SDS-PAGE to be about 3-5 kDa. PCR primers were designed based on the conserved amino acid sequences of class IIa bacteriocins. A 3-kb DNA fragment was amplified and three open reading frames (ORFs) were found. The first encodes a probable immunity protein of 103 amino acid residues and shows complete homology with the putative immunity protein of E. faecium DPC1146. The second and third ORFs respectively encode a probable transposase gene and an inducing factor. The upstream region of the immunity gene, in which the bacteriocin structural gene is located, was amplified. A homology search revealed that the bacteriocin produced by E. faecium N15 exhibits complete identity to enterocin A, a bacteriocin produced by E. faecium DPC1146. PCR using the primers designed in this study is a rapid and sufficient method of screening for bacteriocin-producing strains.

Up-to-date modification of the anaerobic sludge digestion process introducing a separate sludge digestion mode

Sewage treatment plants in Japan are subjected to advanced treatment to remove nutrients and hence control eutrophication problems in lakes and bays. This paper discusses the advantages and disadvantages of the separate digestion treatment mode for sludge generated from advanced wastewater treatment. In the separate digestion only primary sludge is digested and the excess activated sludge is directly dewatered. Separate digestion can reduce the return load of nutrients to approximately one third, and has major potential for the beneficial use of sludge.

Influence of research center on overall survival outcomes at each phase of treatment

BACKGROUND

Clinical studies of dental implants tend to fall into two broad categories. Efficacy studies apply strict exclusion criteria under carefully controlled conditions to produce a narrow range of results. Effectiveness studies more closely model real-world treatment environments, with a more diverse patient sample and broader range of provider skills. In this multi-center study of more than 2,900 dental implants, study centers were grouped by implant survival scores in an attempt to draw attention to the influence of confounding variables associated with the treatment environment.

METHODS

Thirty-two study centers were ranked by implant survival scores at uncovering and assigned to three performance groups. Centers whose overall scores were within approximately one standard deviation of the mean were placed in the middle (70%) performance group (MPG). The remaining centers were placed in either the top (15%) performance group (TPG) or the lower (15%) performance group (LPG). Overall survival and survival by phase of treatment were recorded for each of six implant designs in each of the three performance groups.

RESULTS

From implant placement to 36 months, the TPG achieved survival rates from 100% (for 3 designs) to 95.5% (for one design), with an average of 97% for all designs. Increased variations in survival (97.2% to 73%) occurred in the MPG, with larger variations (96.4% to 48%) in the LPG. The HA-coated cylinder recorded consistently high survival scores (over 95%) in all performance groups and all phases of treatment. Failures for other designs in the MPG and LPG were concentrated in the healing period (placement to uncovering), except for the commercially pure titanium screw, which had the most failures between uncovering and prosthesis loading.

CONCLUSIONS

Implant design and treatment environment both play an important role in implant survival. Two design characteristics appear to enhance survival: 1) a surgical protocol involving minimal instrumentation at placement, and 2) hydroxyapatite (HA) coating. The HA-coated press-fit cylinder design was the least affected by the center's performance.

The influence of bone thickness on facial marginal bone response: stage 1 placement through stage 2 uncovering

BACKGROUND

Various causes of facial bone loss around dental implants are reported in the literature; however, reports on the influence of residual facial bone thickness on the facial bone response (loss or gain) have not been published. This study measured changes in vertical dimension of facial bone between implant insertion and uncovering and compared these changes to facial bone thickness for more than 3,000 hydroxyapatite (HA)-coated and non-HA-coated root-form dental implants.

METHODS

Subjects were predominantly white males, 18 to 80+ years of age (mean 62.9 years), who were patients at 30 Department of Veterans Affairs Medical Centers and two university dental clinics. Alveolar ridges ranged from normal to resorbed with intact basal bone. Following preparation of the osteotomy site, direct measurements with calipers were made of the residual facial bone thickness, approximately 0.5 mm below the crest of the bone. The distance from the top of the implants to the crest of the facial bone was also measured using periodontal probes. Implants were uncovered between 3 to 4 months in the mandible and 6 to 8 months in the maxilla after insertion. Facial bone response was the difference between the height of facial bone at Stage 1 (insertion) and Stage 2 (uncovering).

RESULTS

The mean facial bone thickness after osteotomies were made was 1.7 +/- 1.13 mm. When a mean facial bone thickness of 1.8 +/- 1.41 mm or larger remained after site preparation, bone apposition was more likely to occur. The mean facial bone response for 2,685 implants was -0.7 +/- 1.70 mm. For implants integrated at uncovering, the mean bone response was -0.7 +/- 1.69 mm, and -2.8 +/- 1.57 mm for implants mobile at uncovering. Bone quality-4 had the least facial bone response, -0.5 +/- 2.11 mm. Bone responses were similar for both HA-coated and non-HA-coated implants.

CONCLUSIONS

Significantly greater amounts of facial bone loss were associated with implants that failed to integrate. As the bone thickness approached 1.8 to 2 mm, bone loss decreased significantly and some evidence of bone gain was seen. There was no statistically or clinically significant difference in bone response between HA-coated and non-HA-coated implants.

Variables affecting survival of single-tooth hydroxyapatite-coated implants in anterior maxillae at 3 years

BACKGROUND

The development and expanded use of endosseous dental implants over the last two decades have been remarkably rapid. It is, therefore, imperative that the dental profession closely monitor the performance of root-form implants used in a variety of applications. The Dental Implant Clinical Research Group (DICRG) was established in 1990 by the Department of Veterans Affairs as a forum for conducting prospective, multidisciplinary, multicentered studies in the field of implant dentistry. The DICRG comprised 30 VA medical centers and 2 dental schools at the time of this study. This paper reports on the survival of hydroxyapatite (HA)-coated grooved implants used to replace single missing teeth in anterior maxillae at 3 years post-implant placement.

METHODS

During a 4-year accrual period, a total of 247 single-tooth implant restorations were placed in anterior maxillae. This paper focuses on the survival of 222 implants (149 patients) for which 3-year data were recorded for the period from placement. Survival was examined with respect to patient demographics and health status, implant location, surgical variables, and 2-week post-placement use of chlorhexidine digluconate (0.12%) rinses. Implant stability was recorded using a hand-held probe. Periodontal-type measures were recorded and evaluated, and all complications related to osseointegration were noted. Failure was defined as removal of the implant for any reason.

RESULTS

Establishment and maintenance of osseointegration at 3 years post-placement was 97.3%. During this 3 year period, 6 implants were removed due to either failure to osseointegrate or loss of osseointegration. Implant length correlated positively with 3-year survival (P = 0.003, exact test). The use of preoperative antibiotics was nearly significant to implant survival (P = 0.051. Pearson chi-square). Mean stability values (PTVs) increased incrementally from -4.5 at uncovering to +1.1 at 36 months, indicating a decrease in stability of the bone-implant-prosthesis complex. The most common complication was related to inadequate available bone to fully house implants.

CONCLUSIONS

Three-year post-placement survival data suggest that the use of HA-coated, grooved, endosseous implants to support maxillary anterior single-tooth replacements is a predictable and reliable procedure that can offer significant benefits. Longer implants demonstrated higher survival than shorter implants. The use of preoperative antibiotics was nearly significant to implant survival, and there was an increase in mean PTVs observed over the duration of the study. Further research is needed to assess stability of the hydroxyapatite-bone interface over time.

Three-year post-placement survival of implants mobile at placement

BACKGROUND

Although rigid fixation of endosseous implants at the time of placement is generally thought to be a prerequisite for successful osseointegration, the Dental implant Clinical Research Group (DICRG) of the Department of Veterans Affairs has reported on implants that integrated despite being mobile at placement. The present study examines the frequency of osseointegration and the 36-month post-placement survival of implants mobile at placement in a prospective, multicenter, longitudinal clinical study of more than 3,000 implants conducted by the DICRG.

METHODS

A total of 3,111 implants of 6 different designs were placed in all jaw regions in more than 800 patients at 32 study centers. At the time of this report, 2,770 of these implants had been followed for 36 months post-placement. They included 89 implants that were mobile at placement. Data for demographic variables, implant coating, bone quality, incision type, bone augmentation, and antibiotic usage were recorded. An electronic hand-held probe was used to measure mobility at uncovering and at regular follow-up intervals.

RESULTS

Eighty-nine of 2,770 inserted implants were mobile at placement. Results are reported for two periods: from placement to 36 months and from prosthetic loading to 36 months. The latter method eliminated early failures and resulted in substantially higher scores for both mobile implants at placement (95.9% survival from prosthetic loading to 36 months post-placement versus 79.8% from placement to 36 months) and implants not mobile at placement (98.4% versus 93.4%). Mobility at placement was significant to 3-year survival (P < 0.001). Hydroxyapatite (HA) coating improved the performance of implants mobile at placement (91.8% for HA-coated versus 53.6% for non-HA) and those not mobile at placement (97.2% for HA-coated versus 87.4% for non-HA). Radiographic findings suggested that crestal bone response around implants which were mobile versus immobile at placement was similar.

CONCLUSIONS

Although implant stability at the time of placement is clearly desirable as seen in the superior 3-year survival of stable implants, it may not be an absolute prerequisite to osseointegration or to long-term survival. Several factors may influence the decision to remove or replace a mobile implant. HA-coating significantly improved the performance of both mobile and immobile implants at placement to 3 years post-placement (P < 0.001).

The influence of smoking on 3-year clinical success of osseointegrated dental implants

BACKGROUND

Health risks associated with smoking have been exhaustively documented and include increased incidence of periodontal disease, greater risk of osteitis following oral surgery, and compromised wound healing due to hypoxia. Information related directly to dental implants, although limited, points to higher rates of implant failures among smokers than non-smokers. This paper reports on long-term clinical outcomes of osseointegrated dental implants placed in smokers and non-smokers in a longitudinal clinical study of endosseous dental implants.

METHODS

In 1990, the Dental Implant Clinical Research Group (DICRG) of the Department of Veterans Affairs (DVA) launched an 8-year, randomized, prospective clinical study of more than 2,900 endosseous dental implants in more than 800 patients at 32 study centers. Confounding variables, including smoking patterns, were recorded. For this report, new follow-up data were analyzed for two groups: 1) current smokers and 2) those who never smoked combined with those who quit. Most of the variables recorded for each implant were screened on a univariate basis as possible predictors associated with implant survival/failure. Those with P values less than 0.15 and those likely to be a factor of clinical importance were placed in a logistic regression equation and analyzed for a simultaneous effect on survival. A step-wise procedure was used to eliminate those variables that showed the least significance, until only those variables with a Wald chi-square of significance in the presence of others remained. The effects of clustering within patients and of unbalanced distribution within hospitals were standardized to facilitate analysis of influence of demographic variables. The GEE analysis was performed with the patient as the primary cluster.

RESULTS

Current data do not support earlier findings that smoking contributes to early implant failure (placement to uncovering). A trend of greater failures in smokers appeared between the time after uncovering and before insertion of the prosthesis. Hydroxyapatite (HA)-coated implants had significantly lower failure rates. For the entire 3-year period, overall failures were significantly higher for smokers than non-smokers.

CONCLUSIONS

Results suggest that increased implant failures in smokers are not the result of poor healing or osseointegration, but of exposure of peri-implant tissues to tobacco smoke. Data also suggest that detrimental effects may be reduced by: 1) cessation of smoking; 2) the use of preoperative antibiotics; and 3) the use of HA-coated implants.

Survival and stability (PTVs) of six implant designs from placement to 36 months

BACKGROUND

Numerous new implant designs and materials have become available over the last decade, each with special claims of superiority in restoring complex cases. Differences in existing clinical databases, study designs, and methods of determining failures/survival are seldom standardized, which complicates comparisons of clinical performance of these new designs. Little information is available concerning the changes in stability of various designs and materials following clinical loading.

METHODS

A total of 30 VA medical centers and 2 dental schools combined to form the Dental Implant Clinical Research Group (DICRG). More than 2,900 implants were placed, restored and data gathered from the time of placement to 36 months. Implant stability from uncovering to 36 months and survival from placement to 36 months were determined. Survival was determined using two different approaches--considering all implants removed at any time, regardless of the reason (DICRG approach), and considering only those that were removed following loading of the prosthesis (post-loading approach). Survival was also determined for each of the three phases of implant treatment--phase 1, from the time of placement to uncovering and abutment connection; phase 2, from uncovering to placement and loading of the prosthesis; and phase 3, from loading of the prosthesis to 36 months.

RESULTS

The two approaches to determining survival for each implant design and/or material included in the study showed differences in reported numbers ranging from 1.1% to 21.7%. The largest difference in survival was for the commercially pure titanium screw (used in this study only in the maxillary completely edentulous applications), which showed a 21.7% greater survival rate. With the DICRG approach, the hydroxyapatite (HA)-cylinder had the highest survival (97.5%). When considering the post-loading approach, the titanium-alloy screw had the highest survival (99.4%), with the HA-cylinder having the next highest survival (98.6%). The HA-cylinder did not show increased stability from uncovering to 36 months, and the HA-grooved implant became less stable.

CONCLUSIONS

HA-coated implants demonstrated the highest survival rate; 2) the post-loading analysis approach inflated survival; 3) non-HA implants showed increased stability following loading; 4) HA-coated implants showed a slight decrease or no change in stability; and 5) the clinical significance of the changes in implant stability must be determined for the long-term.

Long-term assessment (5 to 71 months) of endosseous dental implants placed in the augmented maxillary sinus

BACKGROUND

It is not uncommon for the placement of endosseous dental implants in the maxillary posterior jaw region to be complicated by the pneumatization of the maxillary sinus. When this occurs, the residual bone between the floor of the sinus and the crestal ridge is inadequate for the placement of implants. The sinus lift procedure provides a way to increase the amount of available bone and the placement of longer implants.

METHODS

One hundred twenty (120) implants were placed in 45 augmented maxillary sinuses. Patients ranged in age from 34 to 78 years. The implant design included a limited number of non-hydroxyapatite (HA)-coated titanium screws, with the majority of the implants being HA-coated cylinders, grooved cylinders, and screws. The augmentation materials were autogenous bone, allogenic bone (demineralized freeze-dried bone allograft, DFDBA), alloplastic bone (HA), combination grafts of HA and DFDBA, and combination grafts of autogenous bone and DFDBA. All the cases were successfully restored with implant-supported, bar-retained overdentures or fixed partial dentures. The follow-up began at Stage 2 uncovering and ranged from 5 to 71 months, with a mean of 38.2 and standard deviation of 14.6 months.

RESULTS

Three (2.5%) of the 120 implants failed between the period of implant placement and 36 months. Failures appeared to be associated with a history of smoking. Other complications encountered during the study are presented. Implant survival was higher in those placed in grafted sinuses (97.5%) than in those placed in the posterior maxilla without sinus grafting (90.3%).

CONCLUSION

These findings support the use of implants placed in augmented sinuses to support dental prostheses.

Survival of various implant-supported prosthesis designs following 36 months of clinical function

BACKGROUND

The use of endosseous dental implants to replace natural teeth lost to trauma, dental caries, or periodontal disease has become a predictable form of prosthetic treatment since gaining popularity in the early 1980s. While numerous clinical studies have focused on the survival of implants, few address the survival of different prosthesis designs.

METHODS

Beginning in 1991, 882 prostheses supported by more than 2,900 implants (687 patients) were placed by the Department of Veterans Affairs Dental Implant Clinical Research Group (DICRG). These prostheses were divided into five research strata based on arch location. The recommended design for each stratum was: bar-supported overdenture (maxillary completely edentulous); screw-retained hybrid denture (mandibular completely edentulous); screw-retained fixed partial denture (mandibular and maxillary posterior partially edentulous); and cemented single crown (maxillary anterior single tooth). Alternative overdenture designs were utilized in the edentulous arches when the recommended prosthesis could not be fabricated. Prosthesis success rates for the research strata were calculated for an observation time of up to 36 months following prosthesis placement.

RESULTS

Success rates for the maxillary edentulous stratum ranged from 94.6% for the bar-retained overdenture supported by five to six fixtures to 81.8% for the cap-retained overdenture. The mandibular edentulous strata produced success rates of 98.1% for the fixed hybrid prosthesis to 91.7% for the cap-retained prosthesis. Success rates for maxillary and mandibular posterior fixed partial dentures were 94.3% and 92.6%, respectively, while the maxillary anterior single-tooth prosthesis yielded a success rate of 98.1% for the 36-month observation period.

CONCLUSIONS

The recommended prosthesis designs investigated in this study proved to be reliable, with encouraging success rates for an observation period of 36 months following placement.

Implant surface coating and bone quality-related survival outcomes through 36 months post-placement of root-form endosseous dental implants

Survival rates from placement to 36 months were reported for the ongoing Dental Implant Clinical Research Group studies of root-form endosseous dental implants. Failure rates for all implants were similar in bone qualities 1 and 2 (6.2% and 6.7%, respectively) and slightly higher in bone qualities 3 and 4 (8.5% and 8.7%, respectively). Hydroxyapatite (HA)-coated implants had an overall failure rate of 3.9% over 36 months in all bone qualities combined, while non-coated implants had a 13.4% failure rate for the same parameters. For each bone quality, there was a significant difference in implant survival for the non-coated implants (P < 0.01). The highest failure rates for non-coated implants were in bone qualities 3 and 4 (19.1% and 25.5%, respectively). No major difference in survival was found for HA-coated implants placed in each bone quality. Possible reasons for the differences in survival are discussed.

Implant survival in patients with type 2 diabetes: placement to 36 months

BACKGROUND

Because the life expectancy of individuals continues to increase, dentists providing dental implant treatment can expect to see an increasing number of patients with diabetes mellitus. Today, there are little data available concerning the clinical outcomes involving the use of implant treatment for patients with diabetes mellitus. There are three types of diabetes mellitus: Type 1 (insulin dependent), Type 2 (non-insulin dependent), and gestational. Because of possible complications from patients with diabetes mellitus, they are excluded from participation in most clinical studies of endosseous dental implant survival.

METHODS

This study attempted to determine if Type 2 diabetes represents a significant risk factor to the long-term clinical performance of dental implants, using the comprehensive DICRG database. Diabetes was a possible exclusion criterion; however, the final decision on Type 2 patients was left to the dental implant team at the research center. A total of 2,887 implants (663 patients) were surgically placed, restored, and followed for a period of 36 months. Of these, 2,632 (91%) implants were placed in non-diabetic patients and 255 (8.8%) in Type 2 patients. Failures (survival) were compared using descriptive data. Possible clustering was also studied.

RESULTS

A model assuming independence showed that implants in Type 2 patients have significantly more failures (P = 0.020). However, if correlations among implants within the patient are considered, the significance level becomes marginal (P = 0.046). The experience of the surgeon did not produce a clinically significant improvement in implant survival. The use of chlorhexidine rinses following implant placement resulted in a slight improvement (2.5%) in survival in non-Type 2 patients and a greater improvement in Type 2 patients (9.1%); the use of preoperative antibiotics improved survival by 4.5% in non-Type 2 patients and 10.5% in Type 2 patients. The use of HA-coated implants improved survival by 13.2% in Type 2 diabetics.

CONCLUSION

Type 2 diabetic patients tend to have more failures than non-diabetic patients; however, the influence was marginally significant. These findings need to be confirmed by other scientific clinical studies with a larger Type 2 diabetic sample size.

Influence of two different approaches to reporting implant survival outcomes for five different prosthodontic applications

BACKGROUND

Over the years, the definition of implant failure has varied, with some investigators accounting for all implants placed, while others discard failures that occurred before clinical loading. The influence of stresses transmitted to various bone densities, by different prosthetic appliances as well as the method used to determine failures, needs to be clearly understood. This paper reports on the influence of two different methods of determining 36-month survival of implants used to support different dental prostheses.

METHODS

More than 2,900 implants with six different designs were placed in 829 patients at 32 study centers and followed for 3 years. The first method of determining survival accounted for all failures from placement through 36 months, while the second method counted only failures from post-loading of the prosthesis to 36 months. Survival curves were used to determine differences in survival outcomes for the two methods.

RESULTS

For the maxillary single-tooth prosthetic application, implant survival from placement to 36 months was 94.7% when all failures were counted and increased to 98.3% with the post-loading method. For upper completely edentulous applications, implant survival was 85.3% with all failures counted and 95.6% with the post-loading method. This 10.3% difference is clinically important. The survival for implants in lower completely edentulous applications increased by 4.4% simply by using the post-loading approach. Implants used for upper posterior, partially edentulous applications involved only hydroxyapatite (HA)-coated implants, and the survival rates were similar (96.4% for all implants and 98.2% for the post-loading method). The difference in reported survival rates for implants in the lower posterior, partially edentulous application was 5.8%. Since failures tended to occur in the earlier phases of treatment, the post-loading approach always resulted in more favorable survival data. With the post-loading approach, valuable information related to implant performance before loading is lost. In all comparisons, HA-coated implant survival was always better than non-HA implants. Clinical investigators should clearly state the method used for determining failures. For all implants included in the study, survival curves illustrated different failure patterns for each method of determining overall survival.

CONCLUSION

Reporting of implant survival rates based on the post-loading method provides more favorable survival rates; however, accounting for all implants provides a more accurate method of determining survival.

Stability of the bone-implant complex. Results of longitudinal testing to 60 months with the Periotest device on endosseous dental implants

BACKGROUND

Maintenance of the health and integrity of the bone-implant complex (osseointegration) has been shown to be essential for long term success of root-form, endosseous dental implants. If reliable clinical indicators of adequacy of the bone-implant complex existed, they could stimulate new and innovative early intervention research to arrest of reverse early deterioration of the bone-implant complex. In the absence of such indicators, this has been problematic. The Periotest may have the potential to provide this information by indirectly assessing the status of the bone-implant complex. However, little information is available that documents either the capability of the Periotest to reliably assess changes of the bone-implant complex or the "normal variations" in Periotest values (PTVs) for both HA-coated and non-coated implants.

METHODS

The purpose of this paper was to document changes in PTVs as influenced by various implant surfaces, implant designs, and bone densities. The mean PTVs recorded for each visit, for all implant types and bone densities, were combined to provide an overall average PTV (A-PTV). The changes in stability (PTVs) were analyzed using a generalized linear model (GLM) with repeated measures (Hotelling's Trace).

RESULTS

The A-PTV for all implants over all visits was -3.5. The mean PTVs ranged from -4.2 (SD = 2.4) at uncovering to -3.9 (SD = 2.9) at 60 months. All implants in bone qualities 1 and 2 (BQ-1 and BQ-2) became more stable over time, while those in bone quality 3 or 4 (BQ-3 and BQ-4) showed a slight decrease in stability. In BQ-1, the mean PTVs increased from -4.7 at uncovering to -4.9 at 60 months. A similar increase in stability occurred in BQ-2 (-4.1 at uncovering to -4.4 at 60 months). In BQ-3, the stability of the implants decreased over time (-3.6 at uncovering to -2.9 at 60 months), with similar changes recorded for BQ-4 (-2.5 at uncovering to -1.0 at 60 months). When comparing the stability of all HA-coated with all non-coated implants, the HA implants became less stable (-4.4 to -3.4) over time, while non-coated implants showed an improvement in stability (-3.5 to -4.5). The changes in stability found in BQ-1, BQ-2, and BQ-3 were similar, with HA implants becoming less stable and non-coated more stable. HA- and non-coated comparisons were not possible in BQ-4 since there were too few non-coated implants placed in this type of bone. The HA-coated screw showed a decrease in stability when compared to the non-coated screw.

CONCLUSIONS

Conclusions of the study are as follows: 1) PTVs are influenced by bone quality and surface coating of the implant; 2) the PTVs at the time of uncovering provide the best estimate of a clinically acceptable PTV for that bone-implant complex; 3) while the PTVs for any bone-implant complex may fluctuate +/- 1.0 around the uncovering PTV during routine healing and loading of the implant, a consistent shift toward a positive PTV that approaches "0" should be cause for concern that the bone-implant complex may be at risk of failure; 4) HA-coated implants became slightly less stable (more positive PTVs) over time, while the non-coated implants became more stable (more negative PTVs); and 5) until a "critical PTV" can be accurately identified, it is suggested that a consistent shift in recorded PTVs that exceeds the +3.0 value on the PTV scale should be viewed with concern for possible deterioration at the bone-implant complex.

Periodontal-type measurements associated with hydroxyapatite-coated and non-HA-coated implants: uncovering to 36 months

BACKGROUND

While the use of hydroxyapatite (HA)-coated endosseous dental implants has gained in popularity over the past 10 years, the short-term and long-term predictability and indications for their use remain highly controversial. Some reports suggest that the HA coating may separate from the substructure, undergo dissolution in tissue fluids, and/or contribute to rapid osseous breakdown around the implant. Other reports, however, relate favorable responses to HA-coated implants, which include rapid bone adaptation to the HA, greater stability at uncovering, and increased coronal bone growth. These contradictions may be related to differences in chemical composition of the HA on the implant surface. Most clinicians and researchers may agree that long-term, independent, scientific clinical studies are needed to compare HA-coated and non-HA-coated (titanium-alloy and CP-titanium) implants under the same conditions. Concerns appear in the literature that HA-coated implants experience greater breakdown because they are more susceptible to bacterial colonization due to their roughness and hydrophilicity. Some studies suggest that specific putative periodontal pathogens may adhere to the HA, thereby predisposing the implant to greater peri-implantitis than that experienced by non-HA implants.

METHODS

A total of 32 clinical research centers, located in various geographic regions of the United States, were selected to participate in a comprehensive clinical study. More than 2,900 HA-coated and non-HA implants were randomized as to location within one of three jaw regions--maxillary anterior, mandibular anterior, and mandibular posterior--and followed for 36 months. It can be assumed that in each of these jaw regions, the conditions associated with both implant surface types would be similar enough to permit meaningful comparisons of periodontal-type measurements that have not previously been reported. Periodontal-type measurements (gingiva, plaque, suppuration, and calculus indices; probing depth; attachment levels; recession; and keratinized tissue width) for each aspect of each implant (mesial, facial, distal, and lingual) were recorded at 3, 6, 9, 12, 18, 24, and 36 months following implant uncovering. The implant was considered the experimental unit for analysis using generalized estimating equation and repeated measure methods. Data for the four aspects of each implant, as well as measurements over time, were all clustered in the unit of analysis.

RESULTS

The percentages of implants with zeros recorded for the indices was remarkably similar for both HA-coated and non-HA implants. While statistically significant differences were found for some of the measurements associated with HA-coated and non-HA implants under certain conditions, these differences were too small to be considered clinically significant.

CONCLUSIONS

Overall, there was no clinically significant difference between the periodontal-type measurements for HA-coated and non-HA-coated implants followed for a period from 3 through 36 months. The concerns about HA-coated implants being associated with adverse periodontal responses for the HA chemical composition included in this study appear to be unfounded for a period of clinical performance up to 36 months.

The influence of preoperative antibiotics on success of endosseous implants at 36 months

The benefits of prophylactic antibiotics are well recognized in dentistry. However, their routine use in the placement of endosseous dental implants remains controversial. As part of the comprehensive Dental Implant Clinical Research Group (DICRG) clinical implant study, the preoperative or postoperative use of antibiotics, the type used, and the duration of coverage were left to the discretion of the surgeon. These data for 2,973 implants were recorded and correlated with failure of osseointegration during healing (Stage 1), at surgical uncovering (Stage 2), before loading the prosthesis (Stage 3), and from prosthesis loading to 36 months (Stage 4). The results showed a significantly higher survival rate at each stage of treatment in patients who had received preoperative antibiotics.