Laser light passage through restored and carious posterior teeth

Laser Doppler flowmetry (LDF) has been used to investigate pulpal blood flow as a means of pulp vitality testing. Transmission of laser light from the tooth surface to the pulp space may be influenced by caries and restorations. One hundred and twenty-two first and second molars that had caries into dentine, restorations or significant loss of coronal tissue were sectioned in half axio-bucco-lingually. The two sections were illuminated with a laser from their buccal and lingual aspects 2 mm coronal to the amelocemental junction. Light reaching the pulp space was recorded. Buccal and lingual illumination sites were equally effective for 67 teeth (55%). Buccal sites alone were effective for 35 teeth (29%), despite over one-third of these surfaces being restored or featuring enamel or dentine caries. A lingual position alone was effective for 20 teeth (16%). Caries affected light transmission, but for over half the teeth, the pulp could be illuminated from all four probe positions. No effect was found when the influence of mesial and distal restorations on transmission into the corresponding tooth section was examined. The pulp spaces of most (84%) restored, and carious posterior teeth could be illuminated by laser light from their buccal aspect and these teeth could potentially be vitality tested using LDF.

Histological, ultrastructural and quantitative investigations on the response of healthy human pulps to experimental capping with mineral trioxide aggregate: a randomized controlled trial

AIM

To investigate the pulpal response to direct pulp capping in healthy human teeth with mineral trioxide aggregate (MTA) as against calcium hydroxide cement (Dycal) as control.

METHODOLOGY

Twenty healthy human third molars had iatrogenic pulpotomy and direct pulp capping with MTA. Another 13 teeth were capped with Dycal as controls. The teeth were restored, with IRM, clinically reviewed and extracted after a number of pre-determined intervals (1 week, 1 month and 3 months). The specimens were fixed, decalcified, subdivided axially into two halves in the oro-buccal (lingual-buccal) plane, embedded in plastic, serial sectioned and evaluated qualitatively and quantitatively by correlative light and transmission electron microscopy with appropriate statistical evaluation of the quantitative data.

RESULTS

Iatrogenic pulpal wounds treated with MTA were mostly free from inflammation after 1 week and became covered with a compact, hard tissue barrier of steadily increasing length and thickness within 3 months following capping. Control teeth treated with Dycal revealed distinctly less consistent formation of a hard tissue barrier that had numerous tunnel defects. The presence of pulpal inflammation up to the longest observation period (3 months) after capping, was a common feature in Dycal specimens.

CONCLUSIONS

The MTA was clinically easier to use as a direct pulp-capping agent and resulted in less pulpal inflammation and more predictable hard tissue barrier formation than Dycal. Therefore, MTA or equivalent products should be the material of choice for direct pulp capping procedures instead of hard setting calcium hydroxide cements.

The potential association between smoking and endodontic disease

The aim of this review was to analyse the literature to assess the possibility of an association between smoking and endodontic disease and the prognosis of endodontically treated teeth. The review of the prognosis of endodontically treated teeth involved taking account of any potential associations with smoking and endodontic disease and marginal periodontitis, and smoking and prosthodontic outcomes. In addition, the role of smoking in implant failure and surgical wound healing was analysed with a view to drawing parallels regarding the possible implications of smoking on the outcome of surgical endodontics. A MEDLINE and Cochrane library search including smoking and various endodontic keyword searches identified three papers which discussed the variables, and did not just mention them separately in the text. The literature demonstrates a paucity of evidence relating smoking with endodontic disease and prognosis, but nevertheless presents evidence of a possible influence on the prognosis of endodontically treated teeth in smokers and a likely increase in surgical complications. The possible merits of a smoking cessation protocol prior to surgical endodontics are also discussed.

The penetration of RealSeal primer and Tubliseal into root canal dentinal tubules: a confocal microscopic study

AIM

To compare penetration depth into dentinal tubules of RealSeal with that of a well-established endodontic sealer (Tubliseal) by means of confocal microscopy.

METHODOLOGY

Twenty sound extracted, single-rooted premolars were selected. Following completion of root canal instrumentation, the teeth were divided into two groups using a stratified sampling method, ranking teeth according to size. In group 1, 10 teeth were filled with Gutta-percha and Tubliseal using cold lateral condensation. In group 2, 10 teeth were filled with RealSeal. Both sealers were labelled with Rhodamine B dye. The teeth were sectioned parallel to their long axis resulting in 20 specimens per group. Confocal microscopy was used to assess the penetration depths of the sealers at three sites for each specimen (coronal, middle and apical). Data were analysed statistically using Stata Release 9.1.

RESULTS

The penetration depth of RealSeal in each one of the thirds of the root canal was found to be higher than that of Tubliseal (P < 0.05). The penetration depths of the two sealers was found to be significantly different (P = 0.001). The mean penetration value for the RealSeal group was 908.8 microm whereas the mean value for the Tubliseal group was 139.5 microm.

CONCLUSIONS

The penetration depth of RealSeal into the root dentinal tubules is significantly greater than that of Tubliseal.

The effect of temperature on viscosity of root canal sealers

AIM

To test the hypothesis that there was no significant (alpha = 0.05) change in viscosity of commercially available root canal sealers with increase in temperature using a high-performance Advanced Rheometric Expansion System (ARES) rheometer.

METHODOLOGY

Materials tested were Apexit, Tubliseal EWT, Grossman's, AH Plus and Ketac-endo. Cone-and-plate geometry was used (25-mm diameter, 0.1 radian and gap 0.051 mm). Measurements were carried out for steady-state viscosity at 25 and 37 degrees C in the shear rate range of 0.001-50 s(-1) at standardized relative humidity and within 30 min from the start of mixing. Five samples were taken for each sealer at each temperature.

RESULTS

At 25 degrees C all sealers demonstrated shear thinning. At 37 degrees C Grossman's (powder : liquid ratio 2 : 1 and 3 : 1) and Ketac-endo had a rapid rise in viscosity and early set whereas the other sealers were shear thinning. On increasing temperature from 25 degrees C to 37 degrees C, Apexit, Tubliseal and AH Plus had reduced viscosity whereas Grossman's 2 : 1, Grossman's 3 : 1 and Ketac-endo had increased viscosity, which varied with the shear rate. The change in viscosity with change in temperature was significant (P < 0.05) for all sealers except AH Plus.

CONCLUSIONS

There was a variation in the effect of increasing temperature on each sealer depending on the shear rate. With the exception of AH Plus, a significant (P < 0.05) change in viscosity was found, and the null hypothesis was rejected.

Mineral trioxide aggregate: a review of the constituents and biological properties of the material

This paper reviews the literature on the constituents and biocompatibility of mineral trioxide aggregate (MTA). A Medline search was conducted. The first publication on the material was in November 1993. The Medline search identified 206 papers published from November 1993 to August 2005. Specific searches on constituents and biocompatibility of mineral trioxide aggregate, however, yielded few publications. Initially all abstracts were read to identify which fitted one of the two categories required for this review, constituents or biocompatibility. Based on this assessment and a review of the papers, 13 were included in the constituent category and 53 in the biocompatibility category. Relatively few articles addressed the constituents of MTA, whilst cytological evaluation was the most widely used biocompatibility test.

Hand and nickel-titanium root canal instrumentation performed by dental students: a micro-computed tomographic study

The aim of this study was to evaluate root canals instrumented by dental students using the modified double-flared technique, nickel-titanium (NiTi) rotary System GT files and NiTi rotary ProTaper files by micro-computed tomography (MCT). A total of 36 root canals from 18 mesial roots of mandibular molar teeth were prepared; 12 canals were prepared with the modified double-flared technique, using K-flexofiles and Gates-Glidden burs; 12 canals were prepared using System GT and 12 using ProTaper rotary files. Each root was scanned using MCT preoperatively and postoperatively. At the coronal and mid-root sections, System GT and ProTaper files produced significantly less enlarged canal cross-sectional area, volume and perimeter than the modified double-flared technique (P < 0.05). In the mid-root sections there was significantly less thinning of the root structure towards the furcation with System GT and ProTaper (P < 0.05). The rotary techniques were both three times faster than the modified double-flared technique (P < 0.05). Qualitative evaluation of the preparations showed that both ProTaper and System GT were able to prepare root canals with little or no procedural error compared with the modified double-flared technique. Under the conditions of this study, inexperienced dental students were able to prepare curved root canals with rotary files with greater preservation of tooth structure, low risk of procedural errors and much quicker than with hand instruments.

The chemical constitution and biocompatibility of accelerated Portland cement for endodontic use

AIM

To evaluate the biocompatibility of mineral trioxide aggregate and accelerated Portland cement and their eluants by assessing cell metabolic function and proliferation.

METHODOLOGY

The chemical constitution of grey and white Portland cement, grey and white mineral trioxide aggregate (MTA) and accelerated Portland cement produced by excluding gypsum from the manufacturing process (Aalborg White) was determined using both energy dispersive analysis with X-ray and X-ray diffraction analysis. Biocompatibility of the materials was assessed using a direct test method where cell proliferation was measured quantitatively using Alamar Blue dye and an indirect test method where cells were grown on material elutions and cell proliferation was assessed using methyltetrazolium assay as recommended by the International standard guidelines, ISO 10993-Part 5 for in vitro testing.

RESULTS

The chemical constitution of all the materials tested was similar. Indirect studies of the eluants showed an increase in cell activity after 24 h compared with the control in culture medium (P<0.05). Direct cell contact with the cements resulted in a fall in cell viability for all time points studied (P<0.001).

CONCLUSIONS

Biocompatibility testing of the cement eluants showed the presence of no toxic leachables from the grey or white MTA, and that the addition of bismuth oxide to the accelerated Portland cement did not interfere with biocompatibility. The new accelerated Portland cement showed similar results. Cell growth was poor when seeded in direct contact with the test cements. However, the elution made up of calcium hydroxide produced during the hydration reaction was shown to induce cell proliferation.

The isthmuses of the mesial root of mandibular molars: a micro-computed tomographic study

AIM

To investigate the prevalence of root canal isthmuses in the apical 5 mm of the mesial root of mandibular molars by means of micro-computed tomography (MCT) and to describe the morphology of the isthmuses.

METHODOLOGY

Twenty extracted mandibular first molars that had fully formed roots were selected. The mesial roots were sectioned from the distal roots and subjected to MCT. The number of sections showing isthmuses in each of the apical 5 mm of the root canals was recorded. In each one of the apical 5 mm of the 20 roots examined, 40 sections were observed, giving a total of 800 sections observed in each group. Data were analysed as a contingency table using the chi-square statistic to test the null hypothesis that location of the sections in each of the apical 5 mm and presence of the isthmus were independent.

RESULTS

Isthmuses were found to be present at all levels with prevalence figures between 17.25 and 50.25%. The chi-square test indicated a significant difference in the distribution of isthmuses with section (P = 0.001). It was found that sections in the first millimetre from the apex had fewer isthmuses than expected and that sections in the third millimetre from the apex had more isthmuses than expected under the null hypothesis. Calcifications were found to be present in most isthmuses, occasionally lateral canals originated from the central part of the isthmuses.

CONCLUSIONS

Isthmuses were present in the vast majority of roots observed. The third millimetre from the apex showed more isthmuses than expected. The results of clinical and surgical endodontic procedures performed in the mesial root of mandibular molars may be affected by this aspect of the root canal anatomy.

A study of the rheological properties of endodontic sealers

AIM

To test the hypothesis that there would be no statistically significant difference in viscosity-related measures of endodontic sealers or change in these with strain rate, internal diameter or powder : liquid ratio in a capillary system.

METHODOLOGY

Materials used were Apexit, Tubliseal EWT, Grossman's sealer and Ketac-endo. Viscosity-related measures were tested in a two-plate test, and in a capillary rheometer. The mean values (n = 12) for thickness and diameter of material formed between two glass plates were tested with one-way analysis of variance. Pressure was applied to a capillary rheometer at strain rates 5 and 10 mm min(-1) in tubes of internal diameter 0.6 and 1.2 mm.

RESULTS

Tubliseal EWT had a thinner film thickness than the other sealers (alpha = 0.05). The difference in diameter between Tubliseal EWT and the other sealers was significant apart from Apexit. Increased strain rate gave a significant increase (alpha = 0.05) in the flow of all sealers. Narrower tubes produced increased velocity, which was significant for all sealers, and reduced volumetric flow, which was significant for all sealers except Grossman's 2 : 1 (Wilcoxon signed rank test). Reduction in powder : liquid ratio of Grossman's significantly increased flow in narrow tubes and at higher strain rate (Mann-Whitney test).

CONCLUSION

There was a significant difference between the flow of Tubliseal EWT and the other sealers tested in the two-plate test; capillary flow was affected by sealer, internal diameter, strain rate and powder : liquid ratio. The null hypotheses were rejected.

Pulp size in molars: underestimation on radiographs

The aim was to determine whether radiographs provide a clinically useful indication of pulp size in diseased/restored human first molar teeth, and to investigate accessibility of pulp tissue for diagnostic testing using laser Doppler flowmetry (LDF). Extracted teeth of known age were collected. Restorative materials were removed and teeth with evidence of pulp exposures excluded. Fifty-six teeth were radiographed from buccal and mesial aspects, and then their crowns were sectioned axiobuccolingually and photographed. Images were digitally scanned and measurements made of the total pulp area (above a line across the most superior part of the pulpal floor) and the pulp area in the clinical crown (superior to a line between the amelocemental junctions). The pulp width at the cervix and the highest point of the pulp were also recorded. Data were analysed using Pearson correlations. Pulp areas within the clinical crowns were significantly larger than indicated by radiographs, by 23% in the case of the clinically attainable buccal view (P < 0.05). Pulps may be more accessible to flowmeter testing than they appear. Absence of pulp tissues in the crown was recorded in equal numbers of teeth on radiographs and sections, but with agreement for only one tooth. Sixteen per cent of the teeth had no pulp area in the clinical crown when sectioned, but might still be suitable for testing using LDF.

Biocompatibility of two commercial forms of mineral trioxide aggregate

AIM

To examine the biocompatibility of two commercial forms of mineral trioxide aggregate (MTA), by evaluating the morphology of an established cell line.

METHODOLOGY

The two cements were cast on glass cover slips and cured for 1 or 28 days. Saos-2 osteosarcoma cells were trypsinized and seeded at a density of 1 x 10(5) cells and were then placed in medium over the material-coated coverslips for 1, 5 and 7 days. After these time intervals the media were discarded and the cells fixed. Cell morphological investigation was performed by scanning electron microscopy at various magnifications ranging from x 250 to x 500. The biocompatibility of cement constituents, alusilicate flux and bismuth oxide was also investigated.

RESULTS

All cement samples cured for 1 day showed a confluent cell monolayer after 5 and 7 days. The response to both materials was similar. Materials cured for 28 days showed incomplete cell confluence after 1 and 5 days. Alusilicate flux and bismuth oxide did not demonstrate biocompatibility.

CONCLUSIONS

The 1-day cured samples of two commercial forms of MTA showed good biocompatibility. However, the 28-day cured samples were less biocompatible after 1 and 5 days.

Coronal pulp size in molars: a study of bitewing radiographs

AIM

To: (i) study coronal pulp dimensions in human first molar teeth; (ii) investigate the effects of restorations on pulp size; (iii) determine differences in dimensions between teeth of Mongoloid patients and teeth of other ethnic groups; and (iv) record the presence of pulp stones.

METHODOLOGY

Bitewing radiographs of 121 subjects (mean age, 20.9 years) were taken under standardized conditions. The films were digitally scanned and nine measurements were made from the image of each first molar. The data were analysed in terms of presence or absence of restorations and in terms of racial group. Differences were examined using Student's t-test, Pearson correlations and Levene's test.

RESULTS

A total of 445 teeth were analysed. Large crowns were correlated to large pulps. Teeth restored with occlusal and proximal restorations had significantly smaller pulps (P = 0.044 and 0.004, respectively), but no difference was found in pulp area in the clinical crown between the restoration types. Mongoloid crowns were shorter and more bulbous. Pulp areas of maxillary molars and pulp widths at the cervix of mandibular molars were significantly larger in Mongoloids. The pulp area in the clinical crown correlated to pulp horn height for Mongoloids and others and for maxillary and mandibular teeth. No differences were found between the heights of pulp horns in the Mongoloid and other teeth. Four of the pulp measurements demonstrated sexual dimorphism. Stones were present in almost 10% of the subjects, representing 4% of the tooth pulps examined.

CONCLUSION

Even teeth with shallow occlusal restorations had reduced pulp spaces. There were significant differences in pulp and crown dimensions between the teeth of Mongoloid patients and those of other patients.

A prospective clinical study of Mineral Trioxide Aggregate and IRM when used as root-end filling materials in endodontic surgery

AIM

To assess the success rate of the root-end filling material, Mineral Trioxide Aggregate (MTA).

METHODOLOGY

Referred adult patients were recruited using strict entry criteria and randomly allocated to receive MTA or IRM. A standardized surgical technique was employed: the root end was resected perpendicularly and a root-end cavity was prepared ultrasonically and filled. A radiograph taken immediately after surgery was compared with those taken at 12 and 24 months. Customised film holders and the paralleling technique were used; radiographs were assessed by two trained observers using agreed criteria. The results from 122 patients (58 in IRM group, 64 in MTA group) after 12 months and 108 patients (47 in IRM group, 61 in MTA group) for the 24-month review period were analysed using the chi2 test.

RESULTS

The highest number of teeth with complete healing at both times was observed when MTA was used. When the numbers of teeth with complete and incomplete (scar) healing, and those with uncertain and unsatisfactory healing were combined, the success rate for MTA was higher (84% after 12 months, 92% after 24 months) compared with IRM (76% after 12 months, 87% after 24 months). However, statistical analysis showed no significant difference in success between materials (P > 0.05) at both 12 and 24 months.

CONCLUSIONS

In this study, the use of MTA as a root-end filling material resulted in a high success rate that was not significantly better than that obtained using IRM.

An evaluation of accelerated Portland cement as a restorative material

Biocompatibility of two variants of accelerated Portland cement (APC) were investigated in vitro by observing the cytomorphology of SaOS-2 osteosarcoma cells in the presence of test materials and the effect of these materials on the expression of markers of bone remodelling. Glass ionomer cement (GIC), mineral trioxide aggregate (MTA) and unmodified Portland cement (RC) were used for comparison. A direct contact assay was undertaken in four samples of each test material, collected at 12, 24, 48 and 72 h. Cell morphology was observed using scanning electron microscopy (SEM) and scored. Culture media were collected for cytokine quantification using enzyme-linked immunosorbent assay (ELISA). On SEM evaluation, healthy SaOS-2 cells were found adhering onto the surfaces of APC variant, RC and MTA. In contrast, rounded and dying cells were observed on GIC. Using ELISA, levels of interleukin (IL)-1beta, IL-6, IL-18 and OC were significantly higher in APC variants compared with controls and GIC (p<0.01), but these levels of cytokines were not statistically significant compared with MTA. The results of this study provide evidence that both APC variants are non-toxic and may have potential to promote bone healing. Further development of APC is indicated to produce a viable dental restorative material and possibly a material for orthopaedic

Three-year clinical comparison of survival of endodontically treated teeth restored with either full cast coverage or with direct composite restoration

STATEMENT OF PROBLEM

Little information exists regarding the outcome of crown build-ups on endodontically treated teeth restored with metal-ceramic crowns or with only a direct-placed composite.

PURPOSE

The aim of this study was to evaluate the clinical success rate of endodontically treated premolars restored with fiber posts and direct composite restorations and compare that treatment with a similar treatment of full-coverage with metal-ceramic crowns.

MATERIAL AND METHODS

Subjects included in this study had one maxillary or mandibular premolar for which endodontic treatment and crown build up was indicated and met specific inclusion/exclusion criteria. Only premolars with Class II carious lesions and preserved cusp structure were included. Subjects were randomly assigned to 1 of the following 2 experimental groups: (1) teeth endodontically treated and restored with adhesive techniques and composite or (2) teeth endodontically treated, restored with adhesive techniques and composite, and then restored with full-coverage metal-ceramic crowns. Sixty teeth were included in the first group and 57 in the second. All restorations were performed by one operator. Causes of failure were categorized as root fracture, post fracture, post decementation, clinical and/or radiographic evidence of marginal gap between tooth and restoration, and clinical and/or radiographic evidence of secondary caries contiguous with restoration margins. Subjects were examined for the listed clinical and radiographic causes of failure by 2 calibrated examiners at intervals of 1, 2, and 3 years. Exact 95% confidence intervals for the difference between the 2 experimental groups were calculated.

RESULTS

At the 1-year recall, no failures were reported. The only failure modes observed at 2 and 3 years were decementations of posts and clinical and/or radiographic evidence of marginal gap between tooth and restoration. There was no difference in the failure frequencies of the 2 groups (95% confidence interval, -17.5 to 12.6). There was no difference between the number of failures caused by post decementations and the presence of marginal gaps observed in the 2 groups (95% confidence intervals, -9.7 to 16.2 and -17.8 to 9.27).

CONCLUSION

Within the limitations of this study, the results upheld the research hypothesis that the clinical success rates of endodontically treated premolars restored with fiber posts and direct composite restorations after 3 years of service were equivalent to a similar treatment of full coverage with metal-ceramic crowns.

Pattern of transmission of laser light through carious molar teeth

AIMS

The aims of this study were to investigate the pattern of transmission of laser light through carious human molar teeth, and to examine the effect on light transmission of reactions to caries in the dentine.

METHODOLOGY

Sectioned carious human molars were examined whilst illuminated from their external surfaces by a helium-neon laser probe of 0.5 mm diameter. The pattern of light transmission was observed and selected specimens were photographed. The passage of light through the surrounding dentine toward the pulp space was investigated by confocal microscopy. Further carious and restored teeth were illuminated from three buccal and three lingual sites to establish the probability of light being able to reach the coronal pulp space.

RESULTS

For all 31 teeth examined, it was possible to illuminate the pulp space from a position on the buccal side. The presence of intracoronal restorations did not necessarily prevent light transmission to the pulp. Confocal microscopy demonstrated conduction of light within dystrophic deposits of irregular secondary dentine.

CONCLUSIONS

The presence of carious lesions or restorations in molar teeth does not necessarily interfere with transmission of laser light to the pulp space. Light is conducted within irregular secondary dentine. With appropriate probe placement, assessments of pulp health in diseased posterior teeth may be possible using laser Doppler flowmetry.

Detection of bacterial virulence genes associated with infective endocarditis in infected root canals

AIM

The aim of this study was to examine whether bacteria associated with root canals possess genes that might predispose to bacterial colonization of the endocardium.

METHODOLOGY

Oligonucleotides were designed from DNA sequences encoding the functional binding regions of streptococcal fibronectin-binding protein (FnBP) and staphylococcal fibrinogen-binding protein (FgBP). The specificity and cross-reactivity of the oligonucleotide primers were investigated; streptococcal primers were tested for recognition of FnBP genes in other strains of streptococci, and the staphylococcal primers for detection of FgBP from other staphylococci. Interspecies specificity of these primers was also investigated. In a pilot clinical study, the pulp chambers of 16 nonvital teeth without sinus tracts, were opened aseptically. Root canal samples were collected, along with samples from the gingival sulcus and anterior nares. From these samples DNA was extracted, subjected to polymerase chain reaction (PCR) and analysed by agarose gel electrophoresis.

RESULTS

Using the streptococcal FnBP primers, PCR bands were amplified from eight root canal samples, eight gingival samples and three nasal samples. With the staphylococcal primers, PCR bands were amplified from seven root canals, 11 gingival and nine nasal samples. This study showed that PCR could be used to detect bacteria in root canals that possess genes with homology to functional regions of those encoding FnBP or FgBP.

CONCLUSIONS

If bacteria in root canals possess FnBP or FgBP, they may have the potential to cause infective endocarditis.

Osteoblast biocompatibility of mineral trioxide aggregate

This study investigated the biocompatibility of variants of mineral trioxide aggregate (MTA), by culturing human MG63 osteosarcoma cells in the presence of materials, observing cytomorphology and cell growth, and then assaying cytokine expression from the cells. Reference materials were employed. Cell growth was quantified by preparing samples (n = 6) at 2, 4 and 7 days, for viewing by scanning electron microscopy and then scoring the amount of material that was covered by healthy cells. Subsequently, samples of culture media were tested using ELISA assays for expression of Interleukin (IL)-1alpha, IL-6, IL-8, IL-11 and macrophage colony stimulating factor (M-CSF). These assays were compared with controls where no material was present, and where media and fetal calf serum had not been exposed to cells. Results showed good cell growth on MTA. Expression of IL-6 from cells was only evident in the presence of MTA and Interpore 200. Interleukin-8 was expressed in high concentrations only in the presence of MTA. There was no evidence of expression of IL-1alpha or IL-11 with any material. Production of M-CSF was high for all materials. It appears that the variants of MTA are biocompatible and suitable for use in clinical trials.

Cellular response to Mineral Trioxide Aggregate

This investigation studied the cytomorphology of osteoblasts in the presence of Mineral Trioxide Aggregate (MTA) and examined cytokine production. MTA and Intermediate Restorative Material (IRM) were prepared and placed in separate Petri dishes. Osteoblasts (cell-line MG-63), grown to confluence in Hams F12/Dulbecco's modified Eagle's medium, were seeded into the dishes, which were incubated for 1 to 7 days. The specimens were viewed by scanning electron microscopy. For cytokine evaluation, cells were grown either alone or in other dishes containing the test materials for 1 to 144 h. Media were removed for ELISA analysis of interleukin (IL)-1 alpha, IL-1 beta, IL-6, and macrophage colony-stimulating factor. Scanning electron microscopy revealed healthy cells in contact with MTA at 1 and 3 days; in contrast, cells in the presence of IRM appeared rounded. The ELISA assays revealed raised levels of all ILs at all periods when cells were grown in the presence of MTA; in contrast, cells grown alone or with IRM produced undetectable amounts. The macrophage colony-stimulating factor was produced by cells irrespective of the group. It seems that MTA offers a biologically active substrate for bone cells and stimulates IL production.

Cutting pattern of nickel-titanium files using two preparation techniques

The aim of this study was to examine the cutting patterns of recently introduced nickel-titanium endodontic files and compare them with similarly shaped stainless steel files using both balanced-force and stepback techniques. Simulated canals were constructed in resin blocks with 40 degrees curvature. Fifty blocks were prepared by a balanced-force technique: 25 with Nitiflex (Maillefer) and 25 with Flexofiles (Maillefer) to master apical file size 40. Fifty blocks were prepared by a stepback technique: 25 with Nitiflex and 25 with Flexofiles to a master apical file size 30. Composite prints were made of pre- and post-instrumentation canals using a computerized imaging system. The amount of material removed from the inner and outer canal curvatures was measured at eight levels in the apical 11 mm of the canal. The results were analysed by Kruskal-Wallis ANOVA. Using the balanced-force technique, Nitiflex files removed less material on the outer curve apically and less on the inner curve mid-canal (P < 0.05), while Flexofiles caused more apical transportation. In the stepback technique, the Nitiflex files removed more material from the outer curve apically (P < 0.05); the Flexofiles removed more material along the entire inner curve (P < 0.05), and maintained canal curvature better than Nitiflex files. It appeared preferable to use Nitiflex files in a balanced-force technique, and Flexofiles in a filing technique as stainless steel files can be precurved.

Mineral trioxide aggregate stimulates a biological response in human osteoblasts

We report a novel material that appears to stimulate cytokine production in human osteoblasts and allow good adherence of the cells to the material. We have examined cultured osteoblasts (MG-63) in the presence of mineral trioxide aggregate (MTA) as set in moist conditions; secondly, we examined the behavior of these MG-63 cells with respect to cytokine and osteocalcin production and alkaline phosphatase activity. Standard ELISA assays were used for assessment of interleukin (IL)-1 alpha, IL-1 beta, IL-6, macrophage colony stimulating factor (M-CSF), and osteocalcin. Furthermore the levels of alkaline phosphatase were measured to establish the level of differentiation of the cells. Cells without MTA served as controls. Cells also were grown in the presence of polymethylmethacrylate (PMA), the commonly used orthopedic cement. In all dishes cells were seen adhering to the base and MTA at 6 h and had increased to confluence at 144 h. IL-1 alpha (175.1 +/- 32.6 pg/mL), IL-1 beta (154.0 +/- 26.7 pg/mL), and IL-6 (214.7 +/- 21.8 pg/mL) were raised when the cells were grown in the presence of MTA at 144 h, with raised values at all time intervals. M-CSF appeared to be unaffected although the overall value was high (7,045.0 +/- 89.5 pg/mL). In contrast, cells grown in the absence of MTA produced negligible amounts of these cytokines (< pg/mL) as did those cells grown in the presence of PMA. Osteocalcin production increased when cells were grown on MTA from 3.8 +/- 0.87 ng/mL to 19.7 +/- 2.8 ng/mL. No osteocalcin could be detected with PMA. Cells in contact with MTA also appeared to have levels of alkaline phosphatase similar to those reported elsewhere (4.3 +/- 0.21 mumol/mg protein/min). No cells could be found attached to PMA and so no alkaline phosphatase activity could be measured.

Cutting pattern of Flexogate instruments in plastic blocks

Design modifications of endodontic instruments have been made to improve instrumentation in curved root canals. A new instrument, the Flexogate (Maillefer), has been introduced to overcome some of the problems associated with preparation of the apical part of the root canal. The purpose of this study was to investigate the cutting pattern of Flexogates in curved canals (45 degrees) in clear plastic blocks, prepared by four different operators. Image analysis was used to take accurate measurements of canal shape before and after instrumentation to calculate cutting patterns. The results showed that Flexogates did not remain centred in the canal of a plastic block during cutting; maximum transportation occurred in the apical third of the outer curve, with little or none in the middle and coronal thirds. The clinical implications of this study require further investigation of the effect of coronal preflaring, and experimentation in teeth.

Short-term tissue response to potential root-end filling materials in infected root canals

The short-term tissue responses to two potential root-end filling materials, a light-cured glass ionomer cement (Vitrebond) and a reinforced zinc oxide-eugenol cement (Kalzinol), were compared with that to amalgam using a previously devised experimental model. In 24 premolar teeth of beagle dogs (47 roots), a collection of endodontic pathogenic bacteria was first inoculated into the root canals to induce periradicular lesions. On each root, an apicoectomy was performed and root-end cavities prepared to receive fillings of each material. The teeth and surrounding jaw were removed after 2 weeks (23 roots) and 1 week (24 roots); they were then prepared for histological examination. The tissue response to amalgam fillings after 2 weeks and 1 week was marked by moderate or severe inflammation on all roots, and extended to < or = 0.5 mm or > 0.5 mm in 15 out of 16 roots. In contrast, after 2 weeks, the majority of roots filled with Kalzinol showed little or moderate inflammation, while the tissue response to Vitrebond was the best of the three materials, and was also the least extensive. After 1 week, the overall best tissue response was with Vitrebond, followed by Kalzinol. The differences between materials for both time periods with either none or few inflammatory cells when compared with that with either moderate or severe inflammation were not statistically significant (P < 0.02). However, the differences between materials for both time periods with no inflammation or inflammation extending < 0.2 mm when compared with that with inflammation extending > 0.2 mm (< or = 0.5 mm or > 0.5 mm) were statistically significant (P < 0.01). Apart from amalgam, in which healing was marked by the persistence of a localized focus of inflammation adjacent to the root-end filling, even though there were intersample variations, there was little overall difference in the temporal and qualitative healing response to Vitrebond and Kalzinol. Both Vitrebond and Kalzinol have potential as root-end filling materials, as the tissue response was considerably more favourable than that to amalgam even in the short-term.

Histologic assessment of mineral trioxide aggregate as a root-end filling in monkeys

Mineral Trioxide Aggregate (MTA) has been shown in a number of experiments to be a potential root-end filling material. The purpose of this study was to examine the periradicular tissue response of monkeys to MTA and amalgam as root-end fillings. The pulps were removed from all the maxillary incisors of three monkeys. The root canals were prepared and filled with laterally condensed guttapercha and sealer, and the access cavities were restored with amalgam. Buccal mucoperiosteal flaps were raised, and root-end resections were performed before root-end cavity preparation with burs. The root-end cavities in half of the teeth were filled with MTA, while amalgam was placed in the other cavities. After 5 months the periradicular tissue response was evaluated histologically. The results showed no periradicular inflammation adjacent to five of six root ends filled with MTA; also five of six root ends filled with MTA had a complete layer of cementum over the filling. In contrast, all root ends filled with amalgam showed periradicular inflammation, and cementum had not formed over the root-end filling material, although it was present over the cut root end. Based on these results and previous investigations, MTA is recommended as a root-end filling material in man.

Endodontic retreatment. 2: Methods

The best method for retreating a tooth that has already undergone root treatment will depend on the root filling technique and material used; a combination of retreatment techniques may be required. The correct method, combined with the required equipment, skill and experience, are necessary to produce a high standard of retreatment and a successful result. In part 1 of this article, the indications and case selection for root canal retreatment were discussed; this article will now discuss the methods of retreatment available.

Endodontic retreatment. 1: Indications and case selection

Conventional root canal treatment, despite having a reportedly high success rate may not invariably lead to the desired healing response in clinical practice because of shortcomings in the treatment. This is the first of two articles on this subject, and will cover indications and case selection for root canal retreatment. Part 2 will discuss methods of retreatment.

Radiopacity of resin-modified glass-ionomer restorative cements

This in vitro study compared the relative radiopacities of three commercially available resin-modified glass-ionomer cements (Vitremer, Fuji II LC, and Photac-Fil), an experimental resin-modified glass-ionomer (V-66), two conventional glass-ionomers (ChemFil and Fuji Cap II), and amalgam (as the control). Radiopacity was assessed densitometrically and expressed as equivalent thicknesses of aluminum. All the glass-ionomer cements were more radiopaque than enamel and dentin, with the exception of ChemFil and Photac-Fil. Apart from the control material, the experimental resin-modified glass-ionomer material, V-66, had the highest radiopacity of all the materials tested. Of the three resin-modified glass-ionomer materials tested, Fuji II LC was the most radiopaque and Photac-Fil the least. For the radiopacity of restorative glass-ionomer materials to exceed that of enamel, it should be greater than 1.5 mm of equivalent thickness of aluminum.

Root end filling materials: a review

When non-surgical attempts prove unsuccessful or are contraindicated, surgical endodontic therapy is needed to save the tooth. The procedure usually consists of exposure of the involved area, root end resection, root end preparation and insertion of a root end filling material. Numerous materials have been suggested as root end filling materials. This article is a review of the literature on the suitability of various root end filling materials based on their leakage assessment, marginal adaptation, cytotoxicity, and usage test in experimental animals and humans.

Pattern of transmission of laser light in teeth

This study examined the transmission of helium neon laser light in 20 dog and human teeth. The effect of probe position and angulation was observed both macroscopically and at a microscopic level using confocal microscopy. In all teeth in both species, laser light was transmitted through teeth to the pulpal surface with the light following the path of the enamel prisms and dentinal tubules. Probe angulation did not affect the pattern of light transmission, nor did probe position; however, the position of the probe on the tooth surface determined which section of the pulp was illuminated. Enamel and dentine together are able to collect and distribute light within the tooth, with both enamel prisms and dentinal tubules acting as optical fibres.

Effects of prilocaine local anaesthetic solutions on pulpal blood flow in maxillary canines

The effects of prilocaine local anaesthetic solutions on pulpal blood flow (PBF) in maxillary canines were investigated in nine adult subjects. Buccal infiltration of 2 ml of the following solutions were carried out: 3% prilocaine; 3% prilocaine with 0.03 IU/ml felypressin; and 3% prilocaine with 1:100,000 adrenaline. Blood flow in the anaesthetized tooth was monitored by a laser Doppler flowmeter and data stored in a computer. An electric pulp tester was used to assess pulpal anaesthesia. The duration of anaesthesia was recorded. After administration of plain prilocaine, PBF changed little throughout the experiment in all nine subjects. When prilocaine with felypressin was injected. PBF fluctuated greatly, but there was no sustained increase or decrease. In comparison, prilocaine with adrenaline caused a significant decline in PBF in every subject (p < 0.05), but then gradually started to return to the pre-injection level: there was no such change in PBF of the contralateral tooth. Injection of 3% plain prilocaine achieved a short duration of pulpal anaesthesia (median 7 min) in only three subjects. When prilocaine with felypressin was injected, eight out of nine subjects experienced pulpal anaesthesia (median duration 10.5 min). Injection of prilocaine with adrenaline caused pulpal anaesthesia in six of nine subjects (median duration 10.5 min). The use of vasoconstrictors with prilocaine anaesthetics had less pronounced effects on blood flow and shorter periods of anaesthesia than those reported previously for lignocaine with adrenaline.

Effect of various sealers with gutta-percha as root-end fillings on healing after replantation

This study examined histologically the effect of three sealers used with gutta-percha as root-end fillings placed in a replantation model. A total of 14 molar teeth were used in seven monkeys. After extraction, root ends were resected, the canals contaminated with oral bacteria, root-end cavities prepared, and fillings of gutta-percha and sealer placed prior to replantation. After 8 weeks the teeth and surrounding jaw were removed and prepared for histological examination. Six roots filled with gutta-percha plus a fortified zinc oxide-eugenol cement (IRM), 13 with gutta-percha plus zinc oxide-eugenol (EP), and eight with gutta-percha plus Kloropercha, were available for examination. The tissue response to gutta-percha with either zinc oxide material was characterized by little or no inflammation of limited extent. In contrast, more severe inflammation was observed against root ends filled with gutta-percha and Kloropercha. Gutta-percha plus IRM or zinc oxide-eugenol had a much more favourable response than that to amalgam reported previously in a similar experiment.

Effect of wavelength and bandwidth on the clinical reliability of laser Doppler recordings

The aim of this study was to investigate the effect of wavelength and bandwidth on laser Doppler flowmeter signals from vital and root-filled teeth, and to establish their sensitivity and specificity. Twenty human subjects were recruited, each with a vital tooth and the contralateral tooth root filled but not restored apart from the palatal access cavity. Readings were taken from these teeth for 3 min at 20 Hz for each of 3.1 kHz, 14.9 kHz and 22.1 kHz bandwidths using a modified laser Doppler blood flow monitor which permitted simultaneous recording using 810 nm and 633 nm light sources with a probe of four optical fibres with 0.25 mm separation. Ten traces from each combination of variables was examined by 10 trained observers who indicated if the traces came from vital or root-filled teeth judged by the amplitude and regularity of pulsatility of the trace. From the accuracy of their replies, sensitivity and specificity were calculated. Median flux values were higher for vital teeth than for root-filled teeth and for the 810 nm wavelength than for the 633 nm wavelength. Flux values increased with wider bandwidth using the 810 nm light source. With the 633 nm light source, the highest flux values were recorded using the 3.1 kHz bandwidth. Using the Mann-Whitney U test, there was a highly significant difference between readings from vital and root-filled teeth for the 3.1 kHz/810 nm wave length combination (p<0.003) and a significant difference for the 3.1 kHz/633 nm wavelength group (p<0.02). Comparison of other groups showed no significant difference (p>0.05). The 810 nm wavelength showed good sensitivity but poor specificity at 14.9 and 22.1 kHz bandwidths. The 633 nm wavelength showed good specificity, but poor sensitivity, at 14.9 and 22.1 kHz bandwidths. The 3.1 kHz bandwidth showed the best sensitivity and specificity for both wavelengths. Sensitivity and specificity were increased if the results of fast Fourier analysis were considered in addition to observations of flux values and pulsatility of traces. The 810 nm/3.1 kHz combination offered the greatest sensitivity and specificity as a test to distinguish between root-filled and vital teeth. This combination was best when the results of Fourier analysis were considered in addition to visual observations.

Investigation of mineral trioxide aggregate for root-end filling in dogs

Numerous compounds have been used as root-end filling materials. Based on the results of in vitro and intraosseous implantation tests, mineral trioxide aggregate (MTA) seems to have potential as a root-end filling material. The purpose of this study was to examine the periradicular tissue response of dogs to MTA and amalgam. Lesions were developed in periradicular tissues of 46 roots in six beagle dogs. The canals on half of the roots were instrumented and obturated with gutta-percha and sealer, and their access cavities were sealed with MTA. The remaining root canals were instrumented and obturated with gutta-percha and sealer, and their access cavities were sealed with MTA. The remaining root canals were instrumented and obturated with gutta-percha without root canal sealer. The access cavities of the teeth in this group were left open to the oral cavity. After surgical resection of roots, half of the root-end cavities were filled with amalgam and the rest with MTA. The periradicular tissue response of the dogs was evaluated histologically 2 to 5 and 10 to 18 wk following periradicular surgery. Statistical analysis of the results showed less periradicular inflammation and more fibrous capsules adjacent to MTA, compared with amalgam. In addition, the presence of cementum on the surface of MTA was a frequent finding. The results show that MTA can be used as a root-end filling material.

Effect of palatal injections on pulpal blood flow in premolars

The effect of palatal infiltration injections using 2% lignocaine hydrochloride with 1:80,000 adrenaline was evaluated for sound maxillary first premolar teeth. The influence of the injections on pulpal blood flow and local anaesthesia was investigated. Ten human volunteers were given the following injections on different days: 1 ml palatal infiltration; 1 ml buccal infiltration; 1 ml palatal and 1 ml buccal infiltration; and 2 ml buccal infiltration. The blood flow was observed with a laser Doppler flowmeter with the probes held against the buccal surfaces of the teeth by a splint. Blood flow was recorded digitally on a computer in machine units. Pulpal anaesthesia was assessed using a monopolar electric pulp tester. All injections significantly reduced blood flow from baseline levels (p<0.05). The 1-ml palatal injection produced a significantly longer period of reduced blood flow (mean 40 min) compared with the other injections (p<0.05). The duration of blood flow reduction was shorter than the duration of pulpal anaesthesia for every injection. Only seven out of 10 palatal injections achieved pulpal anaesthesia. The 2-ml buccal injection and the combined buccal and palatal injections produced significantly longer anaesthesia than the 1-ml buccal injection (p<0.05).

Sealing ability of potential retrograde root filling materials

The sealing ability of two potential retrograde root filling materials, a light-cured glass ionomer cement (Vitrebond) and a reinforced zinc oxide-eugenol cement (Kalzinol) was compared with that of amalgam using three methods of assessment: bacterial leakage, confocal microscopy and Indian ink leakage. the root canals of 80 extracted human single-rooted teeth were prepared. All the teeth were apicected, retrograde cavities were prepared and then divided into four equal groups of 20 teeth. The teeth were sterilised by autoclaving and the retrograde cavities filled with the test materials. In the control group, retrograde cavities in 10 teeth were left unfilled while cavities in another 10 teeth were sealed with cyanoacrylate cement. The teeth were first subjected to a bacterial leakage test using Enterococcus faecalis as a leakage marker. After which, the adaptation of the retrograde root fillings was assessed using a confocal optical microscope. Finally, the teeth were processed for the Indian ink leakage test. Bacterial leakage occurred in more teeth filled with amalgam compared with both Vitrebond and Kalzinol (P<0.001), between which there were no differences. With confocal microscopy, the size of the marginal gap was largest with amalgam and smallest with Vitrebond; all differences were statistically significant (<0.001). Finally, there was more Indian ink penetration with amalgam compared with both Vitrebond and Kalzinol (P<0.001) but there were no differences between Vitrebond and Kalzinol. Although there were individual differences within samples, overall, the three methods of assessment produced similar results. The sealing ability of Vitrebond and Kalzinol was similar and both materials were better than amalgam.

Effect of various zinc oxide materials as root-end fillings on healing after replantation

This study examined the effect of various zinc oxide materials as root-end fillings of teeth in a replantation model. A total of 35 molar teeth were used from 19 monkeys. After extraction, root ends were resected, the canals contaminated with oral bacteria, root-end cavities prepared and fillings placed prior to replantation. After 8 weeks the teeth and surrounding jaw were removed and prepared for histological examination. Twelve roots were filled with IRM plus dentine chips, and six with Cavit; the tissue response around root ends filled with these materials as assessed by inflammation was similar to that previous reported to IRM and Super EBA cement and was characterized by little or no inflammation of limited extent. In contrast, more severe inflammation was observed around root ends filled with plain zinc oxide-eugenol or Kalzinol; however, the reaction was neither as severe nor as extensive as that to amalgam root-end fillings. Giant cells were observed most often on the surface of fillings with Cavit and zinc oxide-eugenol. It is concluded that the tissue response to IRM with or without added dentine, Super EBA and Cavit was similar and mild; it was less severe than that to zinc oxide-eugenol and Kalzinol. All these materials had a much more favourable response than amalgam

Tissue reaction to implanted super-EBA and mineral trioxide aggregate in the mandible of guinea pigs: a preliminary report

In vitro sealing ability and biocompatibility tests on mineral trioxide aggregate (MTA) have shown similar or better properties for this material than for existing root-end filling substances. The purpose of this study was to examine the tissue reaction of implanted Super-EBA and MTA in the mandibles of guinea pigs. After anesthetizing seven guinea pigs, raising a tissue flap and preparing two bony cavities, the test materials were placed in Teflon cups and implanted in the mandibles. Two bony cavities without implanted materials were left to heal and used as negative controls. The presence of inflammation, predominant cell type, and thickness of fibrous connective tissue adjacent to each implant was recorded. The tissue reaction to MTA implantation was slightly than that observed with Super-EBA implantation. Based on these results , it seems that both Super-EBA and MTA are biocompatible.

Cytotoxicity of four root end filling materials

Leakage and scanning electron microscopic studies have shown that a mineral trioxide aggregate (MTA) used as root end filling material permits significantly less leakage and has better adaptation than other commonly used root end filling materials. Because these materials are in contact with the periradicular tissues, their cytotoxicity should be evaluated before in vivo tests. Using the agar overlay and radiochromium methods, the cytotoxicity of amalgam, Super EBA, IRM, and the MTA was evaluated. Statistical analysis of the data from the agar overlay technique shows that freshly mixed and set amalgam were significantly less toxic than the rest of tested materials (p< 0.00005). Fresh and set MTA ranked second when tested for cytotoxicity with this technique. Similar statistical tests revealed a significant statistical difference between the toxicity of freshly mixed and set materials after 24 h of incubation with radiochromium-labeled mouse L929 cells. The degree of cytotoxicity of fresh and set materials was MTA least toxic followed by amalgam, Super EBA, and IRM. Based on the results of the cell culture methods used in this study it appears that MTA is a potential root end filling material and warrants further in vivo evaluations.