Three-dimensional longitudinal changes of maxilla and mandible morphology during the predental period

AIM

The purpose of this study was to longitudinally analyse the morphology of maxilla and mandible over time in infants using a three-dimensional (3D) surface scanner.

MATERIALS AND METHODS

Seventeen Japanese full-term infants participated in the study. Dental plaster models were fabricated every 3 months from 1 month of age to 12 months. The plaster models were scanned using the 3D surface scanner to create 3D models. The arch width, arch length, arch angle, palatal depth and palatal area of the 3D models were analysed.

RESULTS

The arch width and length of maxilla and mandible increased as the arch angle decreased. The arch width and length of the maxilla were greater than those of the mandible. The total alveolar ridge morphology increased in size in the occlusal view, with marked growth in the sagittal direction. The palatal depth remained virtually unchanged although the palatal area increased as a result of buccal growth of the alveolar ridge.

CONCLUSIONS

The morphological growth pattern of the maxilla and mandible in infants can be evaluated quantitatively using 3D analysis. Knowledge about the healthy development of children and their orofacial growth patterns during the predental period can be applied as an index for diagnostic criteria.

Dynamic viscoelastic properties of vinyl polysiloxane denture soft lining materials

The aim of this study was to investigate the dynamic viscoelastic properties of seven commercially available vinyl polysiloxane denture soft lining materials. Five rectangular specimens (2 x 10 x 30 mm) were prepared from each material. The complex modulus E* (MPa) and loss tangent (tan delta) of each specimen were determined with a non-resonance forced vibration method using an automatic dynamic viscoelastometer at 1 Hz after 1 day of dry storage, and after 1, 30, 60, 90 and 180 days of wet storage at 37 degrees C. All data were analysed using one-way anova and Bonferroni/Dunn's test for multiple comparisons with a significance level of P < 0.01. All materials varied widely in terms of viscoelasticities and showed both an increase in E* and a decrease in tan delta at 1 Hz after the 1-day wet storage. After 60 days of wet storage, both E* and tan delta did not change significantly. The stiffer materials (>30% filler content) with high E* values (>2.00 MPa) showed elastic behaviour with tan delta values of around 0.03. The softer materials (6% filler content) with high tan delta values (initial value > 0.10) showed viscous behaviour and were easily affected by water absorption after the 1-day wet storage. It can be concluded that for the proper selection of vinyl polysiloxane denture soft lining materials, it is very important to evaluate the viscoelastic properties after 60 days of wet storage.

Foliar trichome- and aquaporin-aided water uptake in a drought-resistant epiphyte Tillandsia ionantha Planchon

The atmospheric epiphyte Tillandsia ionantha is capable of surviving drought stress for 6 months or more without any exogenous water supply via an as of yet to be determined mechanism. When plants were soaked in water for 3 h, leaves absorbed a remarkably large amount of water (30-40% on the basis of fresh weight), exhibiting a bimodal absorption pattern. Radiolabeled water was taken up by the leaves by capillary action of the epidermal trichomes within 1 min (phase 1) and then transported intracellularly to leaf tissues over 3 h (phase 2). The removal of epidermal trichome wings from leaves as well as rinsing leaves with water significantly lowered the extracellular accumulation of water on leaf surfaces. The intracellular transport of water was inhibited by mercuric chloride, implicating the involvement of a water channel aquaporin in second-phase water absorption. Four cDNA clones (TiPIP1a, TiPIP1b, TiPIP1c, and TiPIP2a) homologous to PIP family aquaporins were isolated from the leaves, and RT-PCR showed that soaking plants in water stimulated the expression of TiPIP2a mRNA, suggesting the reinforcement in ability to rapidly absorb a large amount of water. The expression of TiPIP2a complementary RNA in Xenopus oocytes enhanced permeability, and treatment with inhibitors suggested that the water channel activity of TiPIP2a protein was regulated by phosphorylation. Thus, the high water uptake capability of T. ionantha leaves surviving drought is attributable to a bimodal trichome- and aquaporin-aided water uptake system based on rapid physical collection of water and subsequent, sustained chemical absorption.

Regulation of drought tolerance by gene manipulation of 9-cis-epoxycarotenoid dioxygenase, a key enzyme in abscisic acid biosynthesis in Arabidopsis

Abscisic acid (ABA), a plant hormone, is involved in responses to environmental stresses such as drought and high salinity, and is required for stress tolerance. ABA is synthesized de novo in response to dehydration. 9-cis-epoxycarotenoid dioxygenase (NCED) is thought to be a key enzyme in ABA biosynthesis. Here we demonstrate that the expression of an NCED gene of Arabidopsis, AtNCED3, is induced by drought stress and controls the level of endogenous ABA under drought-stressed conditions. Overexpression of AtNCED3 in transgenic Arabidopsis caused an increase in endogenous ABA level, and promoted transcription of drought- and ABA-inducible genes. Plants overexpressing AtNCED3 showed a reduction in transpiration rate from leaves and an improvement in drought tolerance. By contrast, antisense suppression and disruption of AtNCED3 gave a drought-sensitive phenotype. These results indicate that the expression of AtNCED3 plays a key role in ABA biosynthesis under drought-stressed conditions in Arabidopsis. We improved drought tolerance by gene manipulation of AtNCED3 causing the accumulation of endogenous ABA.

An in vitro wear study of posterior denture tooth materials on human enamel

This in vitro study evaluated the wear effects of five posterior denture tooth materials on human enamel. The tooth specimen was cusp shaped and enamel specimen was formed as a 10 C 10 C 5 mm plate. All material-enamel combinations were tested using a machine designed to produce sliding contact 20 C 104 times at 60 cycles min-1 and a 4-mm sliding distance per stroke in the bucco-lingual direction under a load of 1 kg. Wear analysis was measured as the total height loss of each combination. In addition, the surface roughness (Ra) of each worn specimen was also evaluated. The least total height loss occurred with poly (methyl methacrylate) (PMMA) enamel pair, and the greatest did with porcelain (Po)-enamel pair. The lowest compound Ra value was measured in high-strength resin (HR)-enamel pair, and the highest in Po-enamel pair. These findings suggest that the best combination is PMMA-enamel, and the poorest combination is Po-enamel.

Mapping of 25 drought-inducible genes, RD and ERD, in Arabidopsis thaliana

We mapped 25 Arabidopsis thaliana drought-inducible genes. Responsive to Dehydration (RD) and Early Responsive to Dehydration (ERD), to the Arabidopsis genome and compared map positions with those of mutants that show environmental stress response. We hybridized CIC yeast artificial chromosome (YAC) library filters with the cDNAs and determined the map positions of 18 corresponding genes. We screened the P1 library with 7 other clones and analyzed segregation of their restriction fragment length polymorphisms (RFLP) in recombinant inbred (RI) lines. One cDNA could be mapped because it had been sequenced by the Arabidopsis genome sequencing program.

Establishment of framework P1 clones for map-based cloning and genome sequencing: direct RFLP mapping of large clones

Large insert capacity, clone stability and convenient propagation in Escherichia coli have made bacterial artificial chromosome and phage P1 vector-based libraries the first choice for large-scale sequencing projects, and these libraries have also proven useful for chromosome walking. The application of these libraries for either purpose is greatly facilitated by the establishment of a set of framework clones distributed across the genome. Using a P1-based library of Arabidopsis thaliana with genomic inserts of 70-90kb (Liu, Y.-G., Mitsukawa, N., Vazquez-Tello, A., Whittier, R.F., 1995. Generation of a high-quality P1 library of Arabidopsis suitable for chromosome walking. Plant J. 7, 351-358), we have now established such a set of framework clones. To date, such clones have usually been identified by hybridization to smaller, previously mapped clones that detect restriction fragment length polymorphisms (RFLPs). In order to establish framework clones more efficiently, we refined protocols for P1 clone DNA isolation and RFLP detection in order to employ whole P1 clones directly as probes. This strategy enabled a very high rate of RFLP detection, and obviated the need to screen the P1 library with smaller RFLP probes. Altogether 95 clones were mapped providing a framework into which further clones can be integrated by physical overlap.

Applications of computerized pattern recognition: a survey of correlations between pharmacological activities and mass spectra

Correlations between mass spectra and pharmacological activities were surveyed by means of computerized learning machine and cluster analysis. The principal component analysis and the nonlinear mapping techniques were used for the feature selection of the data set.